From the Sector

Reset
414 results
Trützschler Group SE expands Board of Directors (c) Trützschler Group SE
Dr. Ulrich Schwenken, CEO
06.07.2022

Trützschler Group SE expands Board of Directors

The Trützschler Group SE has appointed Dr. Ulrich Schwenken and Heinrich Krull to its Board of Directors with effect from July 1, 2022. Dr. Schwenken will serve as Chief Executive Officer (CEO). Heinrich Krull will serve as Chief Operations Officer (COO).

Dr. Schwenken will assume responsibility for Development, Digitalization, IT and Corporate Communications. As a doctoral graduate specialized in engineering, he has many years of experience in automotive and mechanical applications. Since 2008, he has held various management positions in the areas of Service, Sales and Development at companies including Porsche AG and Volkswagen AG, where his responsibility covered a range of key topics such as digital transformation. Most recently, Dr. Schwenken served as CSO, CTO and CDO at Leistritz AG, and was responsible for the strategic focus on innovative growth areas.

The Trützschler Group SE has appointed Dr. Ulrich Schwenken and Heinrich Krull to its Board of Directors with effect from July 1, 2022. Dr. Schwenken will serve as Chief Executive Officer (CEO). Heinrich Krull will serve as Chief Operations Officer (COO).

Dr. Schwenken will assume responsibility for Development, Digitalization, IT and Corporate Communications. As a doctoral graduate specialized in engineering, he has many years of experience in automotive and mechanical applications. Since 2008, he has held various management positions in the areas of Service, Sales and Development at companies including Porsche AG and Volkswagen AG, where his responsibility covered a range of key topics such as digital transformation. Most recently, Dr. Schwenken served as CSO, CTO and CDO at Leistritz AG, and was responsible for the strategic focus on innovative growth areas.

Mr. Krull joined Trützschler Group SE in September 2020. As a graduate engineer for production engineering and management with international experience in mechanical and production site engineering, he has comprehensive expertise related to operations. He also has extensive experience of production technologies, including in-depth knowledge of Lean Management methods and expertise in post-merger integration. As COO, he will be responsible for the areas of Production, Purchasing and Logistics, Quality Assurance as well as Supply Chain.

Until his scheduled retirement at the end of 2022, Dr. Dirk Burger will act as Co-CEO to Dr. Schwenken.

The responsibilities of the Board of Directors of Trützschler Group SE as of July 1, 2022 are as follows: Dr. Ulrich Schwenken (CEO) is responsible for Development, Digitalization, IT and Corporate Communications; Dr. Dirk Burger will take over the role of Co-CEO to Dr. Schwenken until the end of 2022; Dr. Ralf Napiwotzki (CFO) is responsible for Finance and Controlling, Human Resources, Legal and Compliance; Alexander Stampfer (CSO) is responsible for Sales, Marketing and Service; Heinrich Krull (COO) is responsible for Production, Purchasing and Logistics, Quality Assurance as well as Supply Chain.

More information:
Trützschler Board of Directors
Source:

Trützschler Group SE

05.07.2022

EFI Fiery acquires Provider of Production and Design Workflow Software

Fiery®, the digital front end (DFE) and workflow business of EFI, announced that it has acquired CADlink® Technology Corp., a software company that delivers solutions for the high growth areas of digital direct-to-garment (DTG) and direct-to-film (DTF) printing; digital cutting and engraving; digital wide-format print; and vehicle wraps. CADlink’s products address increasingly important customer needs for customization and personalization, and for reducing the time spent moving work from design to production.

CADlink is a global software company that serves markets that require unique workflows involving different types of production devices. CADlink’s products are recognized leaders in design, RIP and workflow technology, and are sold globally to customers through OEM partners and an extensive network of resellers. CADlink’s products, partners and channels are a natural complement to what the Fiery business delivers for its global commercial, display graphics and industrial printing customer base.  

The CADlink software portfolio includes proven, advanced solutions that support the development and growth of e-commerce for custom-manufactured products.

Fiery®, the digital front end (DFE) and workflow business of EFI, announced that it has acquired CADlink® Technology Corp., a software company that delivers solutions for the high growth areas of digital direct-to-garment (DTG) and direct-to-film (DTF) printing; digital cutting and engraving; digital wide-format print; and vehicle wraps. CADlink’s products address increasingly important customer needs for customization and personalization, and for reducing the time spent moving work from design to production.

CADlink is a global software company that serves markets that require unique workflows involving different types of production devices. CADlink’s products are recognized leaders in design, RIP and workflow technology, and are sold globally to customers through OEM partners and an extensive network of resellers. CADlink’s products, partners and channels are a natural complement to what the Fiery business delivers for its global commercial, display graphics and industrial printing customer base.  

The CADlink software portfolio includes proven, advanced solutions that support the development and growth of e-commerce for custom-manufactured products.

“Becoming part of the EFI Fiery business will extend the geographic reach for our products and enhance our ability to support and drive greater value to customers and partners worldwide,” said CADlink Co-founder and CEO Gordon Reynen.

Source:

EFI

(c) RIRI SA
05.07.2022

Riri Group’s FW 23-24 collection explores polysemic dimensions of reality

Since 85 years, Riri Group is a point of reference for the creation of details of style providing fashion brands with accessories, including zippers, buttons, metal components, and fashion jewels. Fashion is necessarily a reflection of social changes, cultural turmoil, popular aspirations, and the needs of the final customer: from these assumptions comes Riri Group’s FW 23-24 collection. The newly released collection presents two dynamic paths to explore the needs of the market targeting self-expression through style: Extreme Outverse and Fluid Glamour.

EXTREME OUTVERSE: Accessories for accessing multidimensionality
Art, space travels and the metaverse experience provide the inspiration for transparent and glossy digital prints, laser markings, use of colored paints, use of jacquard ribbon and iridescent lurex, invisible button caps, PVD finishes (rainbow, matt black), reverse coated nylon zips.

Since 85 years, Riri Group is a point of reference for the creation of details of style providing fashion brands with accessories, including zippers, buttons, metal components, and fashion jewels. Fashion is necessarily a reflection of social changes, cultural turmoil, popular aspirations, and the needs of the final customer: from these assumptions comes Riri Group’s FW 23-24 collection. The newly released collection presents two dynamic paths to explore the needs of the market targeting self-expression through style: Extreme Outverse and Fluid Glamour.

EXTREME OUTVERSE: Accessories for accessing multidimensionality
Art, space travels and the metaverse experience provide the inspiration for transparent and glossy digital prints, laser markings, use of colored paints, use of jacquard ribbon and iridescent lurex, invisible button caps, PVD finishes (rainbow, matt black), reverse coated nylon zips.

FLUID GLAMOUR: Redefine infinitely (elegance) standard
Fluid Glamour expands the processes of representing the individual in an elegant interpretation of its complexity. This concept of fluidity and uniqueness meets the new frontier of the space tourism race and intergalactic style to create futuristic atmospheres and sculptural silhouettes: rhinestones and black stones developed by Amom, wool yarns, jacquard, and a variety of tapes – metallised genuine leather and eco-leather, GOTS-certified cotton and GRS-certified recycled polyester, knitwear, white with silver lurex – that reflect the space exploration and dark desert landscapes.

Source:

RIRI SA / Menabò Group srl

28.06.2022

Printing Expo Online doubles the size of Zone 2 with new exhibitors

  • Printing Expo Online is expanding again by doubling the size of Zone 2 with new exhibitors and feature zones making it one of the largest virtual trade shows in the world.

Visitors will be able to visit the new Zaikio underground catacombs that are accessible from several portals around the show. Click on a New York taxi, a London Phone Box or a funky Hot Dog Van and you will be transported into the Zaikio cavern environment where visitors will be able to watch application videos, arrange demos and sign up to this amazing new cloud-based platform.

Another addition to Zone 2 is the new Software Technology Centre (STC). This feature area will grow over time to show a wide range of software solutions that are available on the market.

Joining Printing Expo Online in the STC for the launch is EFI Fiery, who are showing their full portfolio of software solutions.

Design’N’Buy are also a new exhibitor in the STC with their all-In-One Web2Print software solution that helps users leverage technology, people and processes for the multi-fold growth of your printing business.

  • Printing Expo Online is expanding again by doubling the size of Zone 2 with new exhibitors and feature zones making it one of the largest virtual trade shows in the world.

Visitors will be able to visit the new Zaikio underground catacombs that are accessible from several portals around the show. Click on a New York taxi, a London Phone Box or a funky Hot Dog Van and you will be transported into the Zaikio cavern environment where visitors will be able to watch application videos, arrange demos and sign up to this amazing new cloud-based platform.

Another addition to Zone 2 is the new Software Technology Centre (STC). This feature area will grow over time to show a wide range of software solutions that are available on the market.

Joining Printing Expo Online in the STC for the launch is EFI Fiery, who are showing their full portfolio of software solutions.

Design’N’Buy are also a new exhibitor in the STC with their all-In-One Web2Print software solution that helps users leverage technology, people and processes for the multi-fold growth of your printing business.

Also moving into the STC will be PrintIQ who offer the modern print shop a solution for businesses that need to be able to grow and scale as needed without slowing down or sacrificing quality.

Another new addition to the show is the introduction of the Global Print Trade Club. This initiate is free to all Print Service providers around the world and offers the opportunity to network on a global scale.

New to the exhibition is Kornit Digital with their multi storey showroom which will shortly be opening its doors where visitors will be able to view Direct to Garment and Direct to Fabric printing equipment, technical data, case studies, clothing designs and applications as well as visit the Kornit dedicated auditorium where live streaming content will be shown of Kornit Digital’s Fashion weeks as they happen throughout the year.

Another addition is the new application journey added to the Xeikon Innovation Centre at Printing Expo Online. Visitors will now be able to experience a virtual tour of a living room, kitchen, bathroom, and garage where Xeikon will show applications for commercial, label and Wall Deco products that can be produced on their digital print engines.

Printing Expo Online is open 24/7 365 days a year and has now welcomed over 60,000 visitors from all over the world and continues to grow not only its footprint and total visitor numbers, but also its relevance as an important resource tool for Print Service Providers from around the world that, for whatever reason, are unable to attend live events.

Source:

Printing Expo Online / Bespoke

28.06.2022

EREMA Gruppe and Borealis: K 2022 preview

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

EREMA Group K 2022 preview
In Düsseldorf, the subsidiaries of the EREMA Group - which are EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC - will present their technological innovations, services and support together at a Group trade fair stand for the first time. Seven new recycling systems and components will be presented that enable large-scale plants with a production capacity of up to 6 t/h while setting a milestone in recyclate quality and process stability. This is made possible by technological innovations in the plasticizing unit that have been specially developed for high throughputs with low specific energy consumption, the new EREMA 406 laser filter with a 50 percent larger screening area, and new digital assistance systems that will be launched at K 2022 and made available on the BluPort® customer platform. These include, for example, the PredictOn app, which helps to anticipate and eliminate imminent malfunctions based on continuous measurement and evaluation of machine data.

New series of machines for new target groups
For customers looking for rapidly available recycling systems for simple applications, EREMA Group subsidiary UMAC has an innovation in store for K 2022. The company, which has so far specialised in refurbishing and trading in previously owned equipment, is expanding its business area and in Düsseldorf will launch READYMAC, a standardised, prefabricated recycling solution that can be produced from stock, based on proven EREMA TVE technology.

Finally, in the inhouse recycling segment, PURE LOOP and PLASMAC will round off the wide range of machines offered by the group of companies with their product portfolio.

Live recycling and lighthouse projects at the Circonomic Center
In the outdoor area of the K show, EREMA will bring plastics recycling to life with live demonstrations in conjunction with cooperation partners. Different waste streams are processed for this purpose. The wide variety of high-quality applications for recyclate will be showcased in the "products made of recyclate" exhibition, ranging from technical components to consumer goods and food packaging.

Borealis – accelerating the transition towards a more circular future
Borealis is committed to using their expertise and global reach to advance the circular economy of plastics. At the joint Pre-K 2022 kick-off on June 13, Borealis provided a preview of their integrated way of circular thinking and featured topics and activities at the K Fair 2022 in October. The preview covered new technologies and innovations including new packaging and infrastructure applications of the Bornewables™ portfolio of circular polyolefin products, manufactured with renewable feedstocks. New applications for Design for Recyclability, Re-Use, chemical recycling and advanced mechanical recycling were also on display.

Source:

EREMA Group GmbH

27.06.2022

Ranga Yogeshwar presents third Top 100 award to Mayer & Cie.

Albstadt-based Mayer & Cie. has been named a Top 100 award-winner for the third time as one of Germany’s most innovative small and mid-range businesses. The jury made special mention of the circular knitting and braiding machine manufacturer’s innovative processes. At the centre of the family firm’s further digital development is on the aim to boost its customers’ productivity. Last Friday, 25 June, members of the Mayer & Cie. management received the award from the science journalist Ranga Yogeshwar at the SMB summit in Frankfurt am Main.

For some time now, the focus of development work at Mayer & Cie. has been on lean management in assembly processes, on optimisation of aftersales service, including setting up an online shop for spare parts, and on product lifecycle management, or PLM, which stands for a concept of seamless integration of all the information that arises during a product’s lifecycle. A clean data structure is the basis for these measures, it’s called the “digital backbone”. It means that all product data is processed in the same database and all information is available only once and can be downloaded immediately.

Albstadt-based Mayer & Cie. has been named a Top 100 award-winner for the third time as one of Germany’s most innovative small and mid-range businesses. The jury made special mention of the circular knitting and braiding machine manufacturer’s innovative processes. At the centre of the family firm’s further digital development is on the aim to boost its customers’ productivity. Last Friday, 25 June, members of the Mayer & Cie. management received the award from the science journalist Ranga Yogeshwar at the SMB summit in Frankfurt am Main.

For some time now, the focus of development work at Mayer & Cie. has been on lean management in assembly processes, on optimisation of aftersales service, including setting up an online shop for spare parts, and on product lifecycle management, or PLM, which stands for a concept of seamless integration of all the information that arises during a product’s lifecycle. A clean data structure is the basis for these measures, it’s called the “digital backbone”. It means that all product data is processed in the same database and all information is available only once and can be downloaded immediately.

In all, 436 companies, including about ten per cent from machinery and plant engineering, competed for the Top 100 seal of innovation this year. Nearly 300 were successful and were congratulated in person by Ranga Yogeshwar at the SMB summit. He noted that the award winners set a role model example. “Innovators are thought leaders; they are always pioneers too,” said Yogeshwar, who mentors the competition. “They put their products to the test and ask themselves what an ecological society and a climate-oriented world will require of them. And they check the opportunities and challenges that increasing digitisation will bring for forms of cooperation, social relationships and, with them, for employee retention.”

More information:
Mayer & Cie Top 100 digitisation
Source:

Mayer & Cie.

Photo: Filidea Technical Yarns
27.06.2022

Filidea Technical Yarns: New products and markets under the banner of sustainable evolution

  • New yarns for the contract furnishing world, for industrial sewing threads and the challenge of biodegradable polyester

At the product level, big impulse has been given to the range of industrial sewing threads for various uses, with new references both in the polyester + polyester compositions as well as in cotton + polyester. The industrial threads, marketed as raw material, allow the company to consolidate its position on some strategic markets, such as in Germany.

As a result of the partnership with Trevira® for the spinning of the flame-retardant Trevira®CS fibre, Filidea Technical Yarns reinforces its offer of non-dyed performant yarns aimed at the world of contract furnishings. The sector of hospitality, of furnishings for public and work spaces, fairs and areas for social-cultural gatherings will find a comprehensive answer to its demands in the Trevira®CS-based yarns: with regard to fireproof standards, versatility, resistance to wear and tear, excellent colour rendering, and last but not least, the component of fibre sustainability, an essential value for the design of spaces for collective use.

  • New yarns for the contract furnishing world, for industrial sewing threads and the challenge of biodegradable polyester

At the product level, big impulse has been given to the range of industrial sewing threads for various uses, with new references both in the polyester + polyester compositions as well as in cotton + polyester. The industrial threads, marketed as raw material, allow the company to consolidate its position on some strategic markets, such as in Germany.

As a result of the partnership with Trevira® for the spinning of the flame-retardant Trevira®CS fibre, Filidea Technical Yarns reinforces its offer of non-dyed performant yarns aimed at the world of contract furnishings. The sector of hospitality, of furnishings for public and work spaces, fairs and areas for social-cultural gatherings will find a comprehensive answer to its demands in the Trevira®CS-based yarns: with regard to fireproof standards, versatility, resistance to wear and tear, excellent colour rendering, and last but not least, the component of fibre sustainability, an essential value for the design of spaces for collective use.

Continuing in the development of sustainable production across the sector, the company has undertaken two important initiatives with other actors in the textile supply chain. Filidea participates in Trick, the European blockchain project – part of the European Horizon 2020 programme – involving 29 partners from six different nations to reinforce the circular economy thanks to the development of a digital platform which is complete, traceable and available to operators in the textile sector.

MagnoLab, the network of enterprises in the textile supply chain, and of which Filidea is one of the founding members, gives the impulse to constant R&D activities. MagnoLab was established in 2022 in order to develop tangible solutions for the sector, to create values and to collaborate with regard to current and future demands.

MagnoLab brings together textile companies which are active at various stages of and with complementary roles in the supply chain, and which work in synergy and share objectives, resourcefulness and long-sightedness, with the aim of developing innovation in a structured way. MagnoLab is also open to welcome new partners.

Source:

Filidea Technical Yarns

23.06.2022

Lectra announces the launch of its Automotive Cutting Room 4.0 offer

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 
The Automotive Cutting Room 4.0 offer is a set of solutions connected to one other: Vector, the fabric cutting equipment offering the best performance in the market; Empower, a new generation of digital services to leverage Vector's capabilities; Valia, the heart of the new offer, a software for preparing and scheduling production; and Algopex, an application for exploiting and capitalizing on all the data generated by the cutting room, so you can make the best decisions as quickly as possible.
 
Connecting up all the elements of the Automotive Cutting Room 4.0 offer delivers this unprecedented value and enables an unparalleled level of performance to be achieved. Nicolas Favreau, Lectra’s Automotive Marketing Strategy Director, explains: “When the whole cutting room process is digitalized, the data generated are centralized and accessible in real time, helping our customers to make the best decisions at every step of the production process. The benefits are huge. For example, the key performance indicators from the offer’s first users show productivity gains of around 5% and a reduction in material consumption of nearly 2%. That’s unheard of! These results, combined with the agility that the Automotive Cutting Room 4.0 brings and the complete process control, demonstrate the offer’s maximum relevance.”

Source:

Lectra 

21.06.2022

SHIMA SEIKI to exhibit at Pitti Filati 91

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

SHIMA SEIKI ITALIA S.p.A. will exhibit at the 91st edition of the Pitti Immagine Filati exhibition in Florence, Italy from 29th June till 1st July, 2022. Products exhibited will include the SWG-FIRST124 and N.SIR123SP computerized flat knitting machines as well as APEXFiz™ design software.

The renewed SWG-FIRST124 is a synthesis of all of SHIMA SEIKI’s experience and know-how in computerized shaped knitting, realizing a tremendous range of knitting from full-fashioning and rib shaping to integral knitting. This all-purpose capability is made possible by the revolutionary SlideNeedle™, which, together with loop pressers and transfer jacks, offers remarkable variety, expanding the boundaries of flat knitting with the capability to produce garments that were previously impossible to produce.

The N.SIR123SP computerized knitting machine with intarsia capability features a special loop presser bed for producing hybrid inlay fabrics with both knit and weave characteristics. N.SIR123SP will also feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch. Plating can be performed within the same course and for individual needles. In combination with the loop presser and spring-type moveable sinker system even greater diversity in knit design is possible.

APEXFiz™ is subscription-based design software that supports the creative side of fashion from planning and design to colorway evaluation, realistic fabric simulation and 3D virtual sampling. Virtual samples are a digitized version of sample making that are accurate enough to be used effectively as prototypes, replacing physical sampling and consequently reducing time, cost and material that otherwise go to waste. APEXFiz™ thereby helps to realize sustainability and digitally transform the fashion supply chain.

Continuing from past editions of Pitti Filati are knit samples produced in collaboration with Italian designer Vittorio Branchizio. Staff at the SHIMA SEIKI booth will be donning knit uniforms produced as a collaborative effort between SHIMA SEIKI ITALIA, knitting companies and yarn companies.

Source:

SHIMA SEIKI MFG., LTD.

20.06.2022

Lectra joins Euronext Tech Leaders

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra, whose connected industrial equipment and software facilitate the digital transformation and Industry 4.0 transition of fashion, automotive and furniture companies, announces its selection for the new Euronext Tech Leaders stock market index. This brings Lectra into the community of European technology leaders identified by Euronext as innovative and high-growth companies.

The new Euronext Tech Leaders market index, launched on June 7, comprises 100 European technology companies listed on the Euronext markets, which meet various performance and growth criteria. With the launch of this initiative, Euronext aims to offer better visibility and new services to selected European technology leaders.

Lectra is one of the 41 French companies that are now members of Euronext Tech Leaders. The company, founded in 1973 on a close relationship with fashion industry players, has also for the last three decades worked globally with automotive equipment and furniture manufacturers. In its three strategic markets, Lectra sells connected equipment that optimizes the cutting processes of fabric, leather and other soft materials used by manufacturers, and markets software and services that streamline their production processes while enabling them to be more agile and make considerable material savings.

In fashion, through the use of market data – made accessible and exploitable by the Internet of Things, the cloud, artificial intelligence and big data – Lectra’s software solutions also enable a better understanding of consumers’ behavior. They therefore facilitate strategic decision-making for brands, manufacturers and distributors at the key steps in the value chain of design, production and distribution. In this industry, the impact of Lectra’s solutions on reducing material consumption is even greater because it takes effect as early as the garment design stage.

Technology and innovation are therefore at the heart of Lectra’s strategy, with the company aiming to become a key player in Industry 4.0 in its strategic markets by 2030.

Source:

Lectra

20.06.2022

Reifenhäuser with solutions for films and nonwovens at K 2022

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The Reifenhäuser Group will be represented with four booths at the world's leading trade fair for plastics processing, K 2022, from October 19 to 26. Under this year's Reifenhäuser motto "The Time is Now", the extrusion specialists will show producers of films and nonwovens solutions for the three major topics of the industry: sustainability, digitalization and productivity.

The main booth showcases the Reifenhäuser Blown Film, Cast Sheet Coating and Reicofil business units. With the help of machine exhibits, visual presentations and concrete solutions for end products, visitors will learn, among other things, how they can manufacture fully recyclable products economically, process recyclates safely, increase their output and network the entire production without becoming dependent on systems, specialists or manufacturers. To ensure smooth production even after purchase, Reifenhäuser Service shows how customers can get the best out of their Reifenhäuser products and increase their productivity with rework solutions, modifications, training programs and digital services.

The component specialists of the Reifenhäuser Extrusion Systems business unit will additionally present their portfolio at two other exhibition booths. Here, everything revolves around screws, barrels and extruders - and why, especially for processing recycled material, high-performance wear protection is essential for reliability and high economic efficiency. Reifenhäuser Extrusion Systems will also showcase its innovations for flat dies and coextrusion blocks and their coordinated interaction for maximum productivity.

In addition to its own booths, Reifenhäuser will also be present as a partner of the R-Cycle initiative as part of a joint pavilion on the open-air site in the so-called Circular Economy Forum. R-Cycle is a cooperation project of various technology companies and organizations along the entire life cycle of plastic packaging.

Aanother highlight for visitors to the Reifenhäuser trade fair booths is the opportunity to additionally participate in the in-house exhibition on October 20, 21 and 24 at the Reifenhäuser Technology Center.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik

(c) Epson Deutschland GmbH
09.06.2022

Epson: Neue Moverio AR-Brille für industrielle Anwendungen

Epson stellt mit der Moverio BT-45-Reihe die neueste Generation seiner Augmented Reality (AR)-Brillen für Fernwartung (Remote Assistance), Arbeitsablaufschulungen und Trainings speziell im industriellen Umfeld vor. Das Unternehmen erweitert sein Portfolio zu einem Zeitpunkt, zu dem Augmented Reality Technologien ein rasantes Wachstum vorausgesagt wird.

Epson stellt mit der Moverio BT-45-Reihe die neueste Generation seiner Augmented Reality (AR)-Brillen für Fernwartung (Remote Assistance), Arbeitsablaufschulungen und Trainings speziell im industriellen Umfeld vor. Das Unternehmen erweitert sein Portfolio zu einem Zeitpunkt, zu dem Augmented Reality Technologien ein rasantes Wachstum vorausgesagt wird.

Mithilfe der Epson Moverio können sich Mitarbeitende vor Ort mit technischen Expert:innen an entfernten Standorten vernetzen und Informationen sowie Anleitungen per direkter Kommunikation in beide Richtungen visuell und verbal austauschen und übermitteln. Mit der Brille kann freihändig gearbeitet werden und damit direkt auf die Anweisungen des Gegenübers reagiert werden. Auf diese Weise lassen sich komplexe technische Probleme lösen, Reparatur und Wartung unterstützen und Schulungen vor Ort vereinfachen. Zu den Vorteilen für Unternehmen, die AR-Smart Glasses verwenden, gehören unter anderem schnellere Reaktionszeiten, höhere Quoten von Schadensbehebung schon beim ersten Versuch, Produktivitätssteigerung, geringere Reisekosten und eine damit verbundene Senkung von CO2-Emissionen sowie ein wesentlich angenehmeres Arbeiten bei gleichzeitig erhöhter Kundenzufriedenheit.

Source:

Epson Deutschland GmbH

PREMIUM GROUP & JOOR present their first Hybrid Trade Fair Platform (c) Premium Exhibitions GmbH
09.06.2022

PREMIUM GROUP & JOOR present hybrid Trade Fair Platform

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group unites its various show locations to one cosmos for SS23 at Messe Berlin. The PREMIUM and SEEK shows will be joined by two further components— The Ground is a D2C creative platform for brands and consumers to meet, connect, and collaborate through one-of-a-kind experiences, engaging content, and innovative products, while FASHIONTECH, features masterclasses and panel discussions from the fashion industry’s most brilliant minds. A calendar of content includes deep dives into strong, successful, and sustainable strategies. As part of the content offer, JOOR will facilitate a masterclass on ‘Digital Wholesale’ and a future-looking roundtable discussion with four leading fashion brands on the FASHIONTECH stage.

Throughout the duration of the show, in-person buyers and visitors will have the ability to shop via the Premium Group mobile app. By simply scanning a brand’s corresponding QR code, visitors will link to the brand’s custom profile on JOOR Passport and be able to shop collections directly on the platform. JOOR Passport will also extend the duration of the shows by up to three months, allowing brands to continue wholesale selling digitally outside the window of the physical show.

JOOR and Premium Group’s flexible hybrid format allows visitors and brands a seamless digital and physical introduction to each other and their collections, the opportunity to connect in an efficient, effective, and longer term way, and the convenience to shop the show 24 hours a day from anywhere in the world.

Brands participating include Drykorn, Closed, Bertoni of Denmark, Veja, Ecoalf, Wrangler and Absolut Cashmere.

Source:

Premium Exhibitions GmbH

07.06.2022

EFI confirms Acquisition of Inèdit Software for textile printing

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Electronics For Imaging, Inc. announced that it has acquired Inèdit Software S.L., a developer of raster image processors (RIPs) and related software for digital industrial textile printing. The acquisition extends EFI’s strategy to accelerate digital transformation in industrial print through investments that advance the company’s presence and capabilities in Packaging & Corrugated, Display Graphics, Textile, and Building Materials/Décor applications. Inèdit will be integrated into the Reggiani textile business.

Similar to EFI’s Fiery® digital front end and RIP technologies for the digital commercial and industrial printing markets, Inèdit’s neoStampa product is a recognized benchmark solution for RIPs in digital textile printing. The Inèdit product portfolio features advanced workflow solutions for textile profiling, calibration, design integration and much more. Inèdit’s RIP technology is employed across the worldwide textile industry and is one of the leading RIPs used to drive EFI Reggiani digital printers and other digital industrial textile printer brands. As part of EFI Reggiani, Inèdit will continue to support products for a broad range of digital printers.

Source:

EFI

06.06.2022

SHIMA SEIKI to exhibit at ITM 2022

SHIMA SEIKI MFG. will participate in the ITM 2022 International Textile Machinery Exhibition in Istanbul, Turkey.

SHIMA SEIKI MFG. will participate in the ITM 2022 International Textile Machinery Exhibition in Istanbul, Turkey.

SHIMA SEIKI will exhibit a wide range of its products, including proposals in seam-free WHOLEGARMENT® knitting technology that offers an alternative to labor-intensive manufacturing in Turkey and other international markets. Featured is the flagship MACH2XS WHOLEGARMENT® knitting machine with original SlideNeedle™ on four needle beds and spring-loaded moveable sinkers with expanded patterning capability, the MACH2VS V-bed machine for producing WHOLEGARMENT® items using every other needle, as well as the compact SWG091N2 for producing smaller WHOLEGARMENT® items and accessories. A brand new proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR183 machine. N.SVR123SP features a special loop presser bed that can produce hybrid inlay fabrics with both knit and weave characteristics. N.SVR123SP at ITM will feature the special i-Plating option, capable of alternating yarn colors in any pattern, producing jacquard-like designs using plain jersey stitch for even greater diversity in knit design. Meanwhile N.SSR112 offers industry-leading technology in an economical yet reliable package made in Japan. Also on display is the SFG20 glove knitting machine.

Demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system. At the core of the company’s “Total Fashion System” concept, SDS®-ONE APEX4 provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the design evaluation process with its ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. The same capability is present in APEXFiz™ subscription-based design software. Installed on personal computers, APEXFiz™ features the same functionality as SDS®-ONE APEX4, but with the added versatility to adapt to different work styles and business environments including teleworking and telecommuting. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz™ help to digitally transform the fashion supply chain for realizing sustainable manufacturing. APEXFiz™ will be shown along with SHIMA SEIKI’s yarnbank™ digital yarn web platform that further enhances the realism of virtual samples.

Source:

SHIMA SEIKI MFG., LTD.

Trützschler Man-Made Fibers new TEC-O40 system for industrial yarn (c) Trützschler
Trützschler Man-Made Fibers new TEC-O40 system for industrial yarn
02.06.2022

Trützschler at Techtextil 2022

At this year’s Techtextil in Frankfurt/Main (June 21st to June 24th) Trützschler Nonwovens, Trützschler Card Clothing and Trützschler Man-Made Fibers present various new and proven solutions for the nonwoven, card clothing and man-made fiber sectors. Join us at booth D80 in hall 12.0!

Trützschler Nonwovens invites to talk sustainable fibers such as hemp or linen and out-of-the-box fibers such as nettle and pineapple fibers. Our solutions for manufacturing innovative nonwoven products include machinery and complete production lines for paper grade pulp, re-generated cellulose fibers, cotton and various other natural fibers.

What happens when sustainable meets digital? Trützschler Nonwovens and software partner Proptium introduce T-ONE, our new digital working environment for both fiber- and polymer-based nonwoven producers. T-ONE supports routine tasks such as quality control and recipe management but also enables systematic line monitoring and data collection for T-ONE’s line optimizations.

At this year’s Techtextil in Frankfurt/Main (June 21st to June 24th) Trützschler Nonwovens, Trützschler Card Clothing and Trützschler Man-Made Fibers present various new and proven solutions for the nonwoven, card clothing and man-made fiber sectors. Join us at booth D80 in hall 12.0!

Trützschler Nonwovens invites to talk sustainable fibers such as hemp or linen and out-of-the-box fibers such as nettle and pineapple fibers. Our solutions for manufacturing innovative nonwoven products include machinery and complete production lines for paper grade pulp, re-generated cellulose fibers, cotton and various other natural fibers.

What happens when sustainable meets digital? Trützschler Nonwovens and software partner Proptium introduce T-ONE, our new digital working environment for both fiber- and polymer-based nonwoven producers. T-ONE supports routine tasks such as quality control and recipe management but also enables systematic line monitoring and data collection for T-ONE’s line optimizations.

Trützschler Man-Made Fibers introduces the OPTIMA-based, versatile TEC-O40 and TEC-O80 systems for extruding and spinning industrial yarns (IDY). The modular OPTIMA platform is highly flexible and adaptable to manufacturing a broad spectrum of (semi-)industrial yarns from polyamide, polypropylene or polyester.

SHIMA SEIKI releases digital content web service "SHIMA Datamall™" (c) SHIMA SEIKI MFG., LTD.
01.06.2022

SHIMA SEIKI releases digital content web service "SHIMA Datamall™"

SHIMA SEIKI MFG., LTD. announces the release of its new "SHIMA Datamall™" digital content web service.

SHIMA Datamall™ is an online service that allows users to search, browse and purchase a variety of useful data for the planning, production and sales of fashion items. With SHIMA Datamall, users of the SDS®-ONE APEX series 3D design system, APEXFiz™ Design subscription software and SHIMA SEIKI flat knitting machines will be able to streamline their operations and further promote the digital transformation of textile manufacturing, thereby realizing a shift toward sustainable manufacturing.

Digital content available on SHIMA Datamall™, together with yarn data from the yarnbank™ digital yarn sourcing web service, are meant to support knit manufacturing from planning and design to production and sales, by arranging the data on SDS®-ONE APEX and APEXFiz™.

SHIMA SEIKI MFG., LTD. announces the release of its new "SHIMA Datamall™" digital content web service.

SHIMA Datamall™ is an online service that allows users to search, browse and purchase a variety of useful data for the planning, production and sales of fashion items. With SHIMA Datamall, users of the SDS®-ONE APEX series 3D design system, APEXFiz™ Design subscription software and SHIMA SEIKI flat knitting machines will be able to streamline their operations and further promote the digital transformation of textile manufacturing, thereby realizing a shift toward sustainable manufacturing.

Digital content available on SHIMA Datamall™, together with yarn data from the yarnbank™ digital yarn sourcing web service, are meant to support knit manufacturing from planning and design to production and sales, by arranging the data on SDS®-ONE APEX and APEXFiz™.

Membership is not limited to users of SHIMA SEIKI products. Anyone can search and browse from digital data comprising over 6,000 items, free of charge. Information gathered on SHIMA Datamall is useful for product planning and ideas for new collections. SHIMA SEIKI users can furthermore purchase and download data to facilitate communication with suppliers.

More information:
Shima Seiki digital yarn
Source:

SHIMA SEIKI MFG., LTD.

(c) NewStore GmbH
11.05.2022

TOM TAILOR setzt auf digitales Wachstum mit NewStore Consumer App

NewStore, eine modulare, mobile Omnichannel-Cloud-Plattform für Einzelhandelsmarken weltweit, gab bekannt, dass Tom Tailor eine NewStore Consumer App eingeführt hat. Die Casual Fashion- und Lifestyle-Marke bietet nun ein mobiles Einkaufserlebnis an, das die Kundenbindung erhöht und den Umsatz steigert.

"Mobile Verkäufe sind ein Schlüsselfaktor für Tom Tailor, aber um diesen Kanal wirklich zu nutzen, mussten wir unsere Verbraucher-App aktualisieren", sagte Hendrik Reuter, Director of eCommerce und Consumer Engagement, bei Tom Tailor. "Wir haben uns für NewStore entschieden, weil diese Lösung einfach besser ist als alles, was wir bisher gesehen haben. Die neue App gibt unseren Kunden das Erlebnis eines Flagship-Stores in die Hand."

NewStore, eine modulare, mobile Omnichannel-Cloud-Plattform für Einzelhandelsmarken weltweit, gab bekannt, dass Tom Tailor eine NewStore Consumer App eingeführt hat. Die Casual Fashion- und Lifestyle-Marke bietet nun ein mobiles Einkaufserlebnis an, das die Kundenbindung erhöht und den Umsatz steigert.

"Mobile Verkäufe sind ein Schlüsselfaktor für Tom Tailor, aber um diesen Kanal wirklich zu nutzen, mussten wir unsere Verbraucher-App aktualisieren", sagte Hendrik Reuter, Director of eCommerce und Consumer Engagement, bei Tom Tailor. "Wir haben uns für NewStore entschieden, weil diese Lösung einfach besser ist als alles, was wir bisher gesehen haben. Die neue App gibt unseren Kunden das Erlebnis eines Flagship-Stores in die Hand."

Mit NewStore Studio, dem Content-Management-System für die App, verfügt Tom Tailor über alle nötigen Tools, um eine moderne und ansprechende App zu pflegen. Die Marke wird auch von der Tatsache profitieren, dass NewStore Consumer Apps nachweislich die Nutzung um das 2,5-fache erhöhen und die Konversionsraten um das 7-fache über denen einer traditionellen Website liegen. Da sich NewStore nahtlos in Scayle, die E-Commerce-Plattform von Tom Tailor, integrieren lässt, ist es zudem einfacher denn je, die App auf dem neuesten Stand zu halten und genaue Produkt- und Bestandsinformationen in Echtzeit bereitzustellen.

"Die Verbraucher sind mobiler denn je, daher müssen Marken wie Tom Tailor über den traditionellen E-Commerce und den stationären Handel hinaus denken", sagt Stephan Schambach, Gründer und CEO von NewStore. "Durch die Entwicklung einer nativen App, die die digitalen und physischen Kanäle von Tom Tailor ergänzt, hat NewStore der Marke eine neue, leistungsstarke Möglichkeit gegeben, mit ihren treuesten Kunden zu interagieren."

Source:

NewStore GmbH

After Moody's, Standard & Poor's also upgrades SGL Carbon’s rating (c) SGL Carbon
SGL
11.05.2022

After Moody's, Standard & Poor's also upgrades SGL Carbon’s rating

Standard & Poor's Global Ratings (S&P) raises its long-term rating for SGL Carbon to B- and its issue rating on its financial instruments to B. The outlook for the company is rated as stable by the renowned rating agency.

S&P Global Ratings explains the upgrade of SGL's rating with the company's improved capital structure and the reduction of net debt. The rating agency expects SGL Carbon to generate positive free cash flow in the coming years, which will support the reduction in absolute debt.

For the future development of SGL Carbon, S&P assumes an improvement in profitability based in particular on the expansion of products and materials for the future-oriented core markets of mobility, energy transition and digitalization, besides the savings from the restructuring.

"We are pleased that our operational successes and the already advanced trans-formation of SGL Carbon have been honored by the two major rating agencies - Moody's and S&P - by upgrading the ratings. We also see this as a motivation for the further development of SGL Carbon," explains Thomas Dippold, Chief Financial Officer of SGL Carbon SE.

Standard & Poor's Global Ratings (S&P) raises its long-term rating for SGL Carbon to B- and its issue rating on its financial instruments to B. The outlook for the company is rated as stable by the renowned rating agency.

S&P Global Ratings explains the upgrade of SGL's rating with the company's improved capital structure and the reduction of net debt. The rating agency expects SGL Carbon to generate positive free cash flow in the coming years, which will support the reduction in absolute debt.

For the future development of SGL Carbon, S&P assumes an improvement in profitability based in particular on the expansion of products and materials for the future-oriented core markets of mobility, energy transition and digitalization, besides the savings from the restructuring.

"We are pleased that our operational successes and the already advanced trans-formation of SGL Carbon have been honored by the two major rating agencies - Moody's and S&P - by upgrading the ratings. We also see this as a motivation for the further development of SGL Carbon," explains Thomas Dippold, Chief Financial Officer of SGL Carbon SE.

More information:
SGL Carbon
Source:

 SGL Carbon

06.05.2022

adidas grows double-digit in Western markets in Q1 2022

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate.

  • Currency-neutral sales down 3% as supply constraints reduce top-line by € 400 million
  • Western markets continue to show strong momentum with combined currency-neutral sales growing 13% across North America (+13%), EMEA (+9%) and Latin America (+38%)  
  • Gross margin down 1.9pp to 49.9% driven by significantly higher supply chain costs
  • Operating margin of 8.2% reflecting additional investments into brand, DTC, and digital
  • Net income from continuing operations reaches € 310 million
  • FY 2022 outlook for revenue and net income confirmed at the lower end due to the impact from covid-19-related lockdowns in Greater China

“In the first quarter, consumer demand for our brand and products was strong in all Western markets. Our combined sales in North America, EMEA and Latin America grew at a double-digit rate. Backed by an exceptionally strong wholesale order book and relentless focus on driving growth in our own DTC channels, we expect this positive development to continue for the rest of the year,” said adidas CEO Kasper Rorsted. “In the East, we will return to growth in Asia-Pacific in the second quarter, while we expect the challenging market environment in Greater China to continue. With strong double-digit growth in the vast majority of our markets, representing more than 80% of our business, we are well positioned for success in 2022. “

For the full press release, see attached document.

Source:

adidas AG