From the Sector

Reset
408 results
06.12.2021

Premium Group sets a strong example for the fashion industry

The Premium Group events will take place in Frankfurt am Main in the third week of January 2022, taking into account the 2G+ regulation (all participants have to be vaccinated, recovered and additionally daily tested).
 
On the basis of the current regulations of the federal government and the Hessian state government, which did not announce any further restrictions for vaccinated people last week, the fashion fairs PREMIUM and SEEK, the FASHIONTECH talks and the showcase of the new format THE GROUND will comply with the official health and hygiene regulations from 18th to January 20, 2022 in Frankfurt am Main.
 
This decision is based on the representative feedback from many protagonists of the industry, expert opinions and a close observation of the situation as well as an assessment of all measures that can be taken in Europe to ensure a safe event.

The Premium Group events will take place in Frankfurt am Main in the third week of January 2022, taking into account the 2G+ regulation (all participants have to be vaccinated, recovered and additionally daily tested).
 
On the basis of the current regulations of the federal government and the Hessian state government, which did not announce any further restrictions for vaccinated people last week, the fashion fairs PREMIUM and SEEK, the FASHIONTECH talks and the showcase of the new format THE GROUND will comply with the official health and hygiene regulations from 18th to January 20, 2022 in Frankfurt am Main.
 
This decision is based on the representative feedback from many protagonists of the industry, expert opinions and a close observation of the situation as well as an assessment of all measures that can be taken in Europe to ensure a safe event.

Four formats - one large exhibition hall
The conceptual novelty is that the PREMIUM, SEEK, THE GROUND and FASHIONTECH events will - for the first time and once - take place all together in a spacious hall, which roughly corresponds to the entire area of Station Berlin, on a total area of approx. 20,000 square meters. The resulting simplified admission management serves the safety of everyone. In this way, visitors can quickly and comfortably experience all the inspiration and concentrated brand power at once.

In addition to the security aspect, the merger of the two flagship events PREMIUM and SEEK in one large exhibition hall will bring new features, above all, in terms of content and atmosphere. Apart from an unprecedentedly strong brand portfolio, completely new synergies and energies will arise, which will make the meeting in January a unique momentum in the history of the industry.

Numerous brands have already signed-up and despite some decisions for smaller pop-up presentations, instead of large stands, the willingness to start again together and to want to send positive signals prevails! In addition to established players, many new brands also want to show their collections now.

THE GROUND - new generation, new platform
THE GROUND will give an outlook on what can be expected in summer with an exclusive press and influencer event. The Fashion Festival ‘for a young and purpose driven generation’ is an innovative platform for brands to get in direct contact with Gen Z with interactive installations, campaigns and storytelling.

At the preview event in January, 15 curated brands and key partners will present their value-based projects and products. In keynotes and panel talks, THE GROUND is dedicated to the topics most relevant to GEN Z: diversity, inclusion & sustainability.

FASHIONTECH - innovation, inspiration, content
FASHIONTECH is the content platform for fashion, technology and lifestyle. This is where decision-makers, industry insiders, communication experts and innovative minds meet to exchange experiences, discuss potential and developments, generate new leads and promote exchange between the various industries.

In addition to the core events, the Premium Group will also organize its popular evening events - due to the conditions, of course, to a slightly different extent than usual.

Source:

PREMIUM Exhibitions GmbH

01.12.2021

Rieter Holding AG: Change in the Board of Directors

  • This E. Schneider will not stand for re-election at the 2022 Annual General Meeting
  • Sarah Kreienbühl and Daniel Grieder proposed for election as new members of the Board of Directors

This E. Schneider has informed the Board of Directors that, after 13 years of membership, he will not stand for re-election as a member of the Board of Directors and Vice Chairman of Rieter Holding AG at the next Annual General Meeting on April 7, 2022.

The Board of Directors of Rieter Holding AG will propose Sarah Kreienbühl and Daniel Grieder for election to the Board of Directors at the Annual General Meeting on April 7, 2022.

  • This E. Schneider will not stand for re-election at the 2022 Annual General Meeting
  • Sarah Kreienbühl and Daniel Grieder proposed for election as new members of the Board of Directors

This E. Schneider has informed the Board of Directors that, after 13 years of membership, he will not stand for re-election as a member of the Board of Directors and Vice Chairman of Rieter Holding AG at the next Annual General Meeting on April 7, 2022.

The Board of Directors of Rieter Holding AG will propose Sarah Kreienbühl and Daniel Grieder for election to the Board of Directors at the Annual General Meeting on April 7, 2022.

Sarah Kreienbühl has been a member of the Executive Board of the Federation of Migros Cooperatives since 2018 and heads among other things Human Resources and Communications of the Migros Group. Before that, she spent 14 years at Sonova as Group VP Corporate Human Resources, where she was also responsible for Corporate Communications from 2012. Sarah Kreienbühl holds both the Swiss and French citizenship and graduated from the University of Zurich with a degree in psychology. With her expertise and extensive leadership experience, she will be able to make an important contribution to Rieter’s human resources policy as a member of the Board of Directors.

Daniel Grieder has been CEO of HUGO BOSS AG, based in Metzingen (Germany), since June 2021. He has been working successfully in the textile industry for more than 35 years: initially from 1985 to 2004 as an independent entrepreneur with his own sales agency, which worked for Tommy Hilfiger from 1997. He joined Tommy Hilfiger directly in 2004 and took on additional roles for PVH from 2010 to 2020. He most recently held the positions of Global CEO Tommy Hilfiger and CEO PVH Europe. Daniel Grieder is a Swiss citizen and studied at the Zurich School of Economics and Business Administration.

Source:

Rieter Holding AG

22.11.2021

DOMOTEX cancelled in January 2022

DOMOTEX will not take place in January 2022. This was announced by Deutsche Messe AG as organizer of the leading trade show for carpets and floor coverings.

"We have been fighting for DOMOTEX together with the exhibiting companies until the very end, and have been in daily communication with the industry for months," says Sonia Wedell-Castellano, Global Director DOMOTEX, Deutsche Messe AG.

"DOMOTEX is particularly affected by the impact of the Corona pandemic, as the vast majority of DOMOTEX exhibitors and attendees come from abroad. However, given the current pandemic situation, international business travel is not expected to recover in the short term," adds Wedell-Castellano.

Just over a month ago, the organizers wanted to stage DOMOTEX in the southern part of the Hannover exhibition grounds in a compact format as a Re-Start event in three halls, thus giving the industry a chance to meet physically after almost two years of pandemic.

Wedell-Castellano: "What was considered a realistic and promising Re-Start scenario a month ago, and was also well received by the market, has proven to be no longer feasible in recent days."

DOMOTEX will not take place in January 2022. This was announced by Deutsche Messe AG as organizer of the leading trade show for carpets and floor coverings.

"We have been fighting for DOMOTEX together with the exhibiting companies until the very end, and have been in daily communication with the industry for months," says Sonia Wedell-Castellano, Global Director DOMOTEX, Deutsche Messe AG.

"DOMOTEX is particularly affected by the impact of the Corona pandemic, as the vast majority of DOMOTEX exhibitors and attendees come from abroad. However, given the current pandemic situation, international business travel is not expected to recover in the short term," adds Wedell-Castellano.

Just over a month ago, the organizers wanted to stage DOMOTEX in the southern part of the Hannover exhibition grounds in a compact format as a Re-Start event in three halls, thus giving the industry a chance to meet physically after almost two years of pandemic.

Wedell-Castellano: "What was considered a realistic and promising Re-Start scenario a month ago, and was also well received by the market, has proven to be no longer feasible in recent days."

The organizers are looking into a DOMOTEX date later in the 2022 calendar year. 

More information:
Domotex corona crisis corona virus
Source:

Deutsche Messe AG

22.11.2021

Tata Communications stellt cloud-first Unified Communications-Lösung für Unternehmen vor

Tata Communications, ein globaler Anbieter digitaler Ökosysteme, gibt heute die Einführung von Tata Communications GlobalRapide bekannt. GlobalRapide ist eine Lösung für End-to-End Managed Unified Communications as a Service (UCaaS), durch die Unternehmen ihren Mitarbeitern ein digitales, komplexes und intelligentes Collaboration-Erlebnis bieten können. Mit seinem neuen Service wird Tata Communications zu einem One-Stop-Shop, der sämtliche Unified-Communications-Anforderungen globaler Unternehmen im Hinblick auf deren Digital-First- und Cloud-First-strategien erfüllt.

Tata Communications, ein globaler Anbieter digitaler Ökosysteme, gibt heute die Einführung von Tata Communications GlobalRapide bekannt. GlobalRapide ist eine Lösung für End-to-End Managed Unified Communications as a Service (UCaaS), durch die Unternehmen ihren Mitarbeitern ein digitales, komplexes und intelligentes Collaboration-Erlebnis bieten können. Mit seinem neuen Service wird Tata Communications zu einem One-Stop-Shop, der sämtliche Unified-Communications-Anforderungen globaler Unternehmen im Hinblick auf deren Digital-First- und Cloud-First-strategien erfüllt.

Mit Tata Communications GlobalRapide erhalten Unternehmen Unterstützung bei der Identifizierung der richtigen Kollaborationsplattformen, eine vereinfachte Migration, ein robustes Kommunikationsmanagement auf Unternehmensniveau sowie eine End-to-End-Transparenz, Überwachung und Reporting der Kollaborationslösungen. Der Service wird ergänzt durch SaaS (Software as a Service)-Plattform-basierte Strategie-, Schulungs- und Einblicksfunktionen und bietet Unternehmen die Möglichkeit, die Nutzung ihrer Collaboration-Tools zu analysieren und so die Akzeptanz der Dienste zu maximieren. Dank dieser Ergänzung können Unternehmen mit den cloudbasierten, sicheren Kollaborationslösungen von Tata Communications nun das volle Potenzial ihrer digitalen Kollaborationsstrategie ausschöpfen, indem sie ihre Unified Communications-Infrastruktur besser überwachen und kontrollieren.

Source:

Tata Communications / Harvard Engage! Communications                                                                                             

08.11.2021

ROICA™ by Asahi Kasei turns 50 and showed latest smart stretch fabric range at MarediModa

Showing its leadership, ROICA™ marks a milestone in the world of stretch, enhancing a contemporary wardrobe made of new generation values that are fully conveyed and visible to the end consumer. Indeed, by creating cutting-edge tools, such as the hangtags that provide, through simple and well-designed icons, clear and concise functional information showing for each application the values and performances of each single ROICA™ families: ROICA Colour Perfect ™, ROICA Resistance™, ROICA Feel Good™, ROICA Eco-Smart™, ROICA Contour™.

On top of this, in order to ASSURE that what is labelled as ROICA™ Sustainable truly reflects the brand’s new generation values, the company created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family. A big step toward complete transparency and transparent AUTHENTIC communication.
ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

Showing its leadership, ROICA™ marks a milestone in the world of stretch, enhancing a contemporary wardrobe made of new generation values that are fully conveyed and visible to the end consumer. Indeed, by creating cutting-edge tools, such as the hangtags that provide, through simple and well-designed icons, clear and concise functional information showing for each application the values and performances of each single ROICA™ families: ROICA Colour Perfect ™, ROICA Resistance™, ROICA Feel Good™, ROICA Eco-Smart™, ROICA Contour™.

On top of this, in order to ASSURE that what is labelled as ROICA™ Sustainable truly reflects the brand’s new generation values, the company created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family. A big step toward complete transparency and transparent AUTHENTIC communication.
ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

At MarediModa – the international fair dedicated to fabrics and accessories for the beachwear, underwear and athleisure sectors - ROICA ™ partners such as Eusebio, Iluna Group, Interjersey Milano, Maglificio Ripa, Penn Textile Solutions GmbH, Piave Maitex and Sofileta shared their latest fabric innovations where sustainability cutting-edge performance and design realized with ROICA™ premium stretch ingredient, were on stage.

With the "SmartTex" shirt, astronauts can wear the necessary sensors comfortably on their bodies. © DLR
SmartTex Shirt
27.10.2021

Research for cosmic missions: SmartTex provides data on vital functions

It looks like a normal shirt, but it has it all: The new SmartTex shirt uses integrated sensors to transfer physiological data from astronauts to Earth via a wireless communication network. In this way, the effects of the space environment on the human cardiovascular system will be evaluated and documented, especially with regard to long-term manned space missions. Developed by the German Aerospace Center (DLR) in cooperation with DSI Aerospace Technology, the Medical Faculty of Bielefeld University and textile research partner Hohenstein, SmartTex will be tested for the first time as part of the Wireless Compose-2 (WICO2) project by German ESA astronaut Dr. Matthias Maurer, who will leave for his ‘Cosmic Kiss’ mission on the International Space Station (ISS) for six months on October 30, 2021.

It looks like a normal shirt, but it has it all: The new SmartTex shirt uses integrated sensors to transfer physiological data from astronauts to Earth via a wireless communication network. In this way, the effects of the space environment on the human cardiovascular system will be evaluated and documented, especially with regard to long-term manned space missions. Developed by the German Aerospace Center (DLR) in cooperation with DSI Aerospace Technology, the Medical Faculty of Bielefeld University and textile research partner Hohenstein, SmartTex will be tested for the first time as part of the Wireless Compose-2 (WICO2) project by German ESA astronaut Dr. Matthias Maurer, who will leave for his ‘Cosmic Kiss’ mission on the International Space Station (ISS) for six months on October 30, 2021.

"We were already able to gain valuable insights into the interaction of the body, clothing and climate under microgravity conditions during the previous projects Spacetex (2014) and Spacetex2 (2018)," explains Hohenstein Senior Scientific Expert Dr. Jan Beringer. The insights provided at the time by the mission of ESA astronaut Dr. Alexander Gerst have now been directly incorporated into the development of the new SmartTex shirt at Hohenstein. "Matthias Maurer can wear his tailor-made shirt comfortably on his body during his everyday work on the International Space Station. For this, we used his body measurements as the basis for our cut development and the production of the shirt. We integrated the necessary sensors as well as data processing and communication modules into the shirt's cut in such a way that they interfere as little as possible and are always positioned in the right place, regardless of the wearing situation. This is the prerequisite for reliably measuring the relevant physiological data." The SmartTex shirt is intended to provide a continuous picture of the vital functions of astronauts. This will be particularly relevant for future long-term manned space missions to the Moon and Mars.

For example, during the BEAT experiment (Ballistocardiography for Extraterrestrial Applications and long-Term missions), Matthias Maurer will be the first astronaut to wear a T-shirt equipped with sensors that measure his ballistocardiographic data such as pulse and relative blood pressure. For this purpose, the sensors were calibrated in the :envihab research facility at the DLR Institute of Aerospace Medicine in Cologne. Details on the contraction rate and opening and closing times of the heart valves, which are normally only accessible via sonography or computer tomography, can also be read from the data material. The goal is to study the effects of the space environment on the human cardiovascular system. To be able to analyse these effects realistically, Matthias Maurer's ballistocardiographic data will be recorded before, during and after his stay on the ISS. For the future, a technology transfer of the SmartTex shirt for application in the field of fitness or even in telemedicine is conceivable.

Wireless Compose-2 (WICO2)
The project was planned and prepared by the German Aerospace Center (DLR) and its cooperation partners DSI Aerospace Technology, Hohenstein and the University of Bielefeld. The wireless communication network reads sensor data and can determine the position of people and objects in space by propagation times of radio pulses. It is also available as a platform for several experiments on the ISS. The determined data is temporarily stored within the network and read out at regular intervals by the astronauts. These data packets are then transferred to Earth via the ISS link and analysed by the research teams. It can generate its own energy from artificial light sources via solar cells.

 

 

ESA astronaut Dr. Matthias Maurer in summer 2021 during preliminary talks on the Cosmic Kiss mission in DLR's :envihab in Cologne. © DLR


Sensors measure physiological data during a test run on Earth. © DLR


With the "SmartTex" shirt, astronauts can wear the necessary sensors comfortably on their bodies. © DLR

Dr. Jan Beringer, Hohenstein Senior Scientific Expert. © Hohenstein

THE GROUND debuts at Frankfurt Fashion Week
The Ground Logo
20.10.2021

THE GROUND debuts at Frankfurt Fashion Week

  • A purpose-driven B2C festival for a young and optimistic generation

With THE GROUND, the PREMIUM GROUP is organizing a major fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Anita Tillmann, Jörg Arntz and the PREMIUM GROUP - team, is B2C expert Kai Zollhöfer, who already helped to make the Bread & Butter by Zalando a crowd puller.

“THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding topics at THE GROUND are therefore sustainability, diversity and equality”, says Kai Zollhöfer.

  • A purpose-driven B2C festival for a young and optimistic generation

With THE GROUND, the PREMIUM GROUP is organizing a major fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Anita Tillmann, Jörg Arntz and the PREMIUM GROUP - team, is B2C expert Kai Zollhöfer, who already helped to make the Bread & Butter by Zalando a crowd puller.

“THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding topics at THE GROUND are therefore sustainability, diversity and equality”, says Kai Zollhöfer.

“A  large  number  of  customers  are  interested  in  more  sustainable  options  -  there  is  a  desire  for  a  more conscious lifestyle, but this trend is currently not yet reflected in their actual shopping behavior. In between lies the so-called attitude-behavior gap, which THE GROUND wants to close further as a platform for brands with transparency and cool communication. We cannot expect that every brand, every consumer is currently doing everything 100% right, but it is the responsibility of all of us to take one small step in the right direction every day. We have to talk openly about how to do this in order to learn from each other so that we can take as many people as possible with us on this journey to a more sustainable future.“

The 3-day experiential marketing playground offers brands the opportunity to interactively exhibit purpose-driven stories and products and connect with consumers. In addition to the focus on fashion, brands from the areas of well-being, beauty, mobility and technology will present innovative products and solutions.

Source:

PREMIUM Exhibitions GmbH

20.10.2021

Tata Communications announces its financial results for Q2 FY22

Tata Communications, a global digital ecosystem enabler, announces its financial results for the second quarter ended 30th September 2021.

Consolidated financial highlights:

  • Consolidated revenue came in at INR 4,174 crore (USD 563 Mn); growth of +1.7% QoQ and 5.2% decrease YoY. Sequential growth is on account of gradual recovery across both Data and Voice segments.
  • Consolidated EBITDA stood at INR 1,113 crore (USD 150 Mn); an increase of +12.9% QoQ and a decrease of 3.9% YoY with margins at 26.7%. Margin expanded by 260 BPs QoQ and 40 BPs on a YoY basis.
  • Consolidated Profit After Tax (PAT) is at INR 425 crore (USD 57 Mn) as compared to a profit of INR 385 crore in Q2 FY21, registering a growth of + 10.6% YoY and 43.7% QoQ.
  • CAPEX for this quarter was at INR 392 crore as compared to INR 318 crore in Q2 FY21.

Please find attached the detailed financial results Q2 FY22 for more information.

Tata Communications, a global digital ecosystem enabler, announces its financial results for the second quarter ended 30th September 2021.

Consolidated financial highlights:

  • Consolidated revenue came in at INR 4,174 crore (USD 563 Mn); growth of +1.7% QoQ and 5.2% decrease YoY. Sequential growth is on account of gradual recovery across both Data and Voice segments.
  • Consolidated EBITDA stood at INR 1,113 crore (USD 150 Mn); an increase of +12.9% QoQ and a decrease of 3.9% YoY with margins at 26.7%. Margin expanded by 260 BPs QoQ and 40 BPs on a YoY basis.
  • Consolidated Profit After Tax (PAT) is at INR 425 crore (USD 57 Mn) as compared to a profit of INR 385 crore in Q2 FY21, registering a growth of + 10.6% YoY and 43.7% QoQ.
  • CAPEX for this quarter was at INR 392 crore as compared to INR 318 crore in Q2 FY21.

Please find attached the detailed financial results Q2 FY22 for more information.

More information:
Tata Communications
Source:

Tata Communications / Harvard Engage! Communications

Sappi: Digital printing as next topic of the Blue Couch Series (c) Sappi Europe
19.10.2021

Sappi: Digital printing as next topic of the Blue Couch Series

Digital printing is gaining in importance and increasingly relegating conventional printing methods to the bench. In the new episode of the Blue Couch Series, Sappi and the Durst Group, two seasoned industry leaders, explain what is behind the success of this printing method and which markets offer the greatest future potential for digital printing.

The new challenges manufacturers are currently facing include a growing demand for faster production and delivery, an ever-increasing variety of products, small production volumes and the trend towards more personalised campaigns.

In the latest episode of the Blue Couch Series, Andrea Riccardi, Head of Product Management at Durst, as well as Paola Tiso, Sappi’s Head of Sales Digital Solutions, and Luis Mata, Sales Director Packaging & Digital Solutions, will be talking about how digital printing can meet market demands for timely production with shorter runs and high flexibility, while reducing production costs through changed production processes.

Digital printing is gaining in importance and increasingly relegating conventional printing methods to the bench. In the new episode of the Blue Couch Series, Sappi and the Durst Group, two seasoned industry leaders, explain what is behind the success of this printing method and which markets offer the greatest future potential for digital printing.

The new challenges manufacturers are currently facing include a growing demand for faster production and delivery, an ever-increasing variety of products, small production volumes and the trend towards more personalised campaigns.

In the latest episode of the Blue Couch Series, Andrea Riccardi, Head of Product Management at Durst, as well as Paola Tiso, Sappi’s Head of Sales Digital Solutions, and Luis Mata, Sales Director Packaging & Digital Solutions, will be talking about how digital printing can meet market demands for timely production with shorter runs and high flexibility, while reducing production costs through changed production processes.

One focus will be on the growing market for corrugated boards. Viewers will learn how the exponential growth of e-commerce and the growing pressure for more sustainable solutions are fuelling innovations for the digitalisation of packaging. The other main topic, digital dye sublimation printing, also offers a wide range of benefits to manufacturers in the interior design, decoration, visual communication, sports and fashion sectors and supports the industry's requirements to produce more sustainably.  

The “Digital Printing – far more than just a printing process” episode will air on 2 November at 10am (CET) at: www.sappi-bluecouch.com.

Source:

Sappi Europe

Cilander: R-Vital Multivitamin-Unterwäsche gegen Stressbewältigung (c) Cilander / crystal communications GmbH
15.10.2021

Cilander: R-Vital Multivitamin-Unterwäsche zur Stressbewältigung

Mit der Lancierung der neuen R-Vital Multivitamin-Unterwäsche-Shirts schreibt der Schweizer Spezialist für Textilveredlung ein neues Kapitel in der Unternehmensgeschichte: Das Wissen und die langjährige Erfahrung in der Veredelung von Geweben kommen erstmalig bei der Herstellung eigener Produkte zum Einsatz. Mit Hilfe innovativer Technologien und unter Einhaltung strenger ökologischer und sozialer Standards ist es Cilander gelungen, Vitamin C, E und Ingweröl in verkapselter Flüssigform auf textile Stoffe zu appretieren und diese im Anschluss über einen speziell definierten Trocknungsprozess zu härten. Nach mehreren Prozessschritten entsteht aus dem Rohmaterial ein hochwertiges und funktionales Textil, das 100 Milligramm Vitamin C, 200 Milligramm Vitamin E und 50 Milligramm Ingweröl pro Quadratmeter Stoff enthält. Nach 20 Waschgängen (bei 40°C) sind noch rund zehn Prozent der R-Vital Multivitamin Kapseln im Textil verfügbar. Sind diese aufgebraucht, bleibt der angenehm weiche Tragekomfort und das gute Gefühl, ein langlebiges Produkt gekauft zu haben.

Mit der Lancierung der neuen R-Vital Multivitamin-Unterwäsche-Shirts schreibt der Schweizer Spezialist für Textilveredlung ein neues Kapitel in der Unternehmensgeschichte: Das Wissen und die langjährige Erfahrung in der Veredelung von Geweben kommen erstmalig bei der Herstellung eigener Produkte zum Einsatz. Mit Hilfe innovativer Technologien und unter Einhaltung strenger ökologischer und sozialer Standards ist es Cilander gelungen, Vitamin C, E und Ingweröl in verkapselter Flüssigform auf textile Stoffe zu appretieren und diese im Anschluss über einen speziell definierten Trocknungsprozess zu härten. Nach mehreren Prozessschritten entsteht aus dem Rohmaterial ein hochwertiges und funktionales Textil, das 100 Milligramm Vitamin C, 200 Milligramm Vitamin E und 50 Milligramm Ingweröl pro Quadratmeter Stoff enthält. Nach 20 Waschgängen (bei 40°C) sind noch rund zehn Prozent der R-Vital Multivitamin Kapseln im Textil verfügbar. Sind diese aufgebraucht, bleibt der angenehm weiche Tragekomfort und das gute Gefühl, ein langlebiges Produkt gekauft zu haben. Die Veredelung mindert dabei nicht den Tragekomfort: Dank des hohen Baumwollanteils sind die Unterwäsche-Shirts besonders weich und hautverträglich. Sie sind ISO und OEKO-TEX® STANDARD 100 zertifiziert und mit dem Dermatest-Siegel ausgezeichnet.

Durch Reibung der Textilien am Körper werden die Wirkstoffe aus den Microkapseln freigesetzt und können über die Haut im Körper aufgenommen werden. Das hat mehrere Vorteile:

  • Die Haut ist das größte Organ des menschlichen Körpers und damit prädestiniert für die Aufnahme und Weitergabe revitalisierender Stoffe. 2000 Milligramm Vitamin C kann der menschliche Körper täglich aufnehmen – 20 bis 40 Milligramm davon über die Haut.
  • Die Kombination aus Vitamin C, Vitamin E und Ingwer unterstützt ein ausgeglichenes Immunsystem und hilft, den Feuchtigkeitshaushalt der Haut auf natürliche Weise wiederherzustellen.
  • Vitamin C stärkt das Immunsystem. Vitamin E schützt die Haut vor oxidativem Stress. Ingweröl wirkt regenerativ und enthält ebenfalls antioxidative Eigenschaften.
Source:

Cilander / crystal communications GmbH

13.10.2021

Ralph Lauren and Dow release manual for dyeing processes

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Dow and Ralph Lauren Corporation released a detailed manual on how to dye cotton more sustainably and more effectively than ever before using ECOFAST™ Pure Sustainable Textile Treatment. With this manual, Ralph Lauren and Dow are open-sourcing this improved dyeing process to encourage adoption in the textile industry and help standardize a more sustainable and efficient cotton dyeing system for positive environmental impact.  

The co-developed, step-by-step manual details how to use ECOFAST™ Pure, a cationic cotton treatment developed by Dow, with existing dyeing equipment. Ralph Lauren, the first brand to use ECOFAST™ Pure, partnered with Dow to optimize and implement the technology in its cotton dyeing operations as part of its new Color on Demand platform.

Conventional fabric dyeing processes require trillions of liters of water each year, generating roughly 20% of the world’s wastewater.1, 2 Pretreating fabric with ECOFAST™ Pure helps significantly reduce the amount of water, chemicals and energy needed to color cotton, by enabling up to 90% less process chemicals, 50% less water, 50% less dyes and 40% less energy without sacrificing color or quality.3

Ralph Lauren began integrating Color on Demand into its supply chain earlier this year and first launched product utilizing ECOFAST™ Pure as part of the Company’s Team USA collection for the Olympic & Paralympic Games Tokyo 2020. Designed to help address water scarcity and pollution caused by cotton dyeing, Color on Demand is a multi-phased system with a clear ambition to deliver over time the world’s first scalable zero wastewater cotton dyeing system. By 2025, the brand aims to use the Color on Demand platform to dye more than 80% of its solid cotton products.

 

1 Drew, Deborah and Genevieve Yehounme. “The Apparel Industry’s Environmental Impact in 6 Graphics.” World Resources Institute, July 5, 2017. https://www.wri.org/blog/2017/07/apparel-industrys-environmental-impact-6-graphics
2 Rep. A New Textiles Economy: Redesigning Fashion’s Future. Ellen MacArthur Foundation, Circular Fibres Initiative, 2017. https://ellenmacarthurfoundation.org/a-new-textiles-economy
3 A full third-party reviewed and validated life cycle assessment is available by request at www.dow.com/ecofast.

 

Source:

Dow / G&S Business Communications

From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability (c) DUARTE
Duarte - SS22 collection
13.10.2021

Duarte - SS22 collection

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

  • From C.L.A.S.S. ICON 2021 to Special Project at WHITE Milan, the streetstyle Portuguese brand shows urban outfits for everyday heroes fighting for the environment, with a holistic approach to sustainability

After being rewarded with the 2021 C.L.A.S.S. Icon Award, the Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed with C.L.A.S.S. ecohub support. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

The inspiration behind the collection is the superhero Tadao - Ana Duarte’s dog, an English Cocker Spaniel - which is the World Keeper fighting against the environmental issues mankind has generated. Like a protector of sustainability, it battles modern monsters as Smog Man, Fire Man, Deforestation Man and Wave man, who respectively represent the issues of air pollution, climate change, forest destruction and water overconsumption. A very simple, direct and engaging way of talking about hot topics and simple, direct solutions.

The collection is made of 20 outfits, mainly unisex apart from some of them typically feminine as the crop tops. Hints of bright red and mustard yellow are alternated with denim, grey and pale azure tones, blending in with the colorful prints. Accents of black - used in inserts or as piping - seem to emphasize the outline of the garments. The different textures of the materials create a sense of movement, further enhanced by the unique patterns. All the garments’ prints are exclusively designed by the designer, following each collection inspiration: this time, they recall urban landscapes and the appeal of big metropolis, with Tadao as protagonist in prints, patches and ankle socks.

Among the most representative Duarte outfits we find:

  • A matching sweater with trousers made of Newlife™, a yarn 100% made In Italy coming only from post- consumer, traceable plastic bottles.
  • A unisex oversized bomber is crafted from Newlife™, lined with precious 100% Bemberg™ by Asahi Kasei fabric by Gianni Crespi Foderami and matched with printed neoprene hoodie and shorts.
  • Long-panelled unisex coat and trousers made with ReLAST® denim by Candiani, a responsible textile featuring a premium recycled stretch yarn, ROICA™ by Asahi Kasei. The coat is lined with a fabric by Gianni Crespi Foderami in 100% Bemberg™ by Asahi Kasei, a new generation material made from the smart-tech transformation of cotton linter.
  • The same sustainable stretch yarn is implied in the responsible tulle by Iluna Group, and featured in a shorts and top women’s ensemble, paired with a neoprene printed bomber. The tulle is skillfully matched with 100% Tencel™ back in the loop fabric by Maeba International underneath it.

Ana Duarte is part of a new generation of designers with a new approach to sourcing and production: her research goes into different kind of business models to fit her responsible innovation and style needs at the same time. That’s why in her collection we can find amazing and unique combination of organic, recycled, Back in The Loop, innovative materials that are the right choice for the look&touch and the performance she’s looking for. The result is cool yet respecting people and the environment in full traceability thanks to certified and sometimes even circular solutions. Working with components from various sources and business models requires a certain expertise and a particular sensibility we find in Ana Duarte’s design solutions and in her responsible interpretation of streetwear.

12.10.2021

ALUMO to become wholly-owned subsidiary of AG Cilander

Two long-established companies are joining forces: as of October 2021, textile finishing specialist AG Cilander from Herisau, Switzerland, will acquire 100 percent of ALUMO AG, an Appenzell-based manufacturer known for producing ultra-fine cotton fabrics to exacting Swiss quality standards.

The textile finishing industry is an environment in which quality, new technologies and a keen interest in innovative textile solutions play a crucial role. In this business, strong, reliable alliances with customers and partners are vital pillars to allow growth while still satisfying the high expectations set for the materials used. By acquiring ALUMO AG, the world leader in ultra-fine cotton fabrics, AG Cilander expands into a new market segment, setting the course for successfully broadening its product portfolio and tapping into new sales markets.

Both companies can look back on a long tradition of expertise in the textile industry, and their partnership has been a very successful one for years.

Two long-established companies are joining forces: as of October 2021, textile finishing specialist AG Cilander from Herisau, Switzerland, will acquire 100 percent of ALUMO AG, an Appenzell-based manufacturer known for producing ultra-fine cotton fabrics to exacting Swiss quality standards.

The textile finishing industry is an environment in which quality, new technologies and a keen interest in innovative textile solutions play a crucial role. In this business, strong, reliable alliances with customers and partners are vital pillars to allow growth while still satisfying the high expectations set for the materials used. By acquiring ALUMO AG, the world leader in ultra-fine cotton fabrics, AG Cilander expands into a new market segment, setting the course for successfully broadening its product portfolio and tapping into new sales markets.

Both companies can look back on a long tradition of expertise in the textile industry, and their partnership has been a very successful one for years.

ALUMO AG will continue to operate as an independent company based in Appenzell, keeping the same strategic direction in the fabrics offered and the same standards for excellence in service and quality.

More information:
AG Cilander ALUMO
Source:

crystal communications

PrimaLoft senkt Emissionen um bis zu 70 Prozent dank Weiterentwicklung der PrimaLoft® P.U.R.E.™ Fertigungstechnologie (c) PrimaLoft
PrimaLoft® P.U.R.E.™ Fertigungstechnologie
05.10.2021

Mit neuen Prozessen zu einer besseren CO2-Bilanz

  • PrimaLoft senkt Emissionen um bis zu 70 Prozent dank Weiterentwicklung der PrimaLoft® P.U.R.E.™ Fertigungstechnologie

Der weltweit führende Anbieter innovativer Isolations- und Funktionsmaterialien PrimaLoft, hat weiter an seinen Produktionsprozessen gefeilt und die PrimaLoft® P.U.R.E.™ Fertigungstechnologie aktualisiert. Mit der Weiterentwicklung der firmeneigenen Technologie werden die CO2-Emissionen in der Produktion nun um bis zu 70 Prozent gesenkt – zuvor lagen die Einsparungen bereits bei beachtlichen 48 Prozent. Die ersten Produkte mit der neuen Version von PrimaLoft® P.U.R.E.™ von Markenpartnern wie beispielsweise Stone Island oder Patagonia, werden ab der Saison Herbst/Winter 2022 im Handel sein.

PrimaLoft® P.U.R.E.™ wurde erstmals im Jahr 2019 vorgestellt und steht für „Produced Using Reduced Emissions“. Die innovative Herstellungstechnik ist ein zentraler Bestandteil im Bestreben von PrimaLoft nach dem Motto Relentlessly Responsible™ möglichst nachhaltige Produkte zu entwickeln, ohne dabei Kompromisse in Sachen Leistung und Langlebigkeit einzugehen.

  • PrimaLoft senkt Emissionen um bis zu 70 Prozent dank Weiterentwicklung der PrimaLoft® P.U.R.E.™ Fertigungstechnologie

Der weltweit führende Anbieter innovativer Isolations- und Funktionsmaterialien PrimaLoft, hat weiter an seinen Produktionsprozessen gefeilt und die PrimaLoft® P.U.R.E.™ Fertigungstechnologie aktualisiert. Mit der Weiterentwicklung der firmeneigenen Technologie werden die CO2-Emissionen in der Produktion nun um bis zu 70 Prozent gesenkt – zuvor lagen die Einsparungen bereits bei beachtlichen 48 Prozent. Die ersten Produkte mit der neuen Version von PrimaLoft® P.U.R.E.™ von Markenpartnern wie beispielsweise Stone Island oder Patagonia, werden ab der Saison Herbst/Winter 2022 im Handel sein.

PrimaLoft® P.U.R.E.™ wurde erstmals im Jahr 2019 vorgestellt und steht für „Produced Using Reduced Emissions“. Die innovative Herstellungstechnik ist ein zentraler Bestandteil im Bestreben von PrimaLoft nach dem Motto Relentlessly Responsible™ möglichst nachhaltige Produkte zu entwickeln, ohne dabei Kompromisse in Sachen Leistung und Langlebigkeit einzugehen.

Für die neueste Version von PrimaLoft® P.U.R.E.™ hat das Entwicklerteam die Materialien, das Produktdesign und den Produktionsprozess selbst im Detail analysiert und jeden Bereich optimiert, um die während der Herstellung entstehenden CO2-Emissionen drastisch zu reduzieren. PrimaLoft hat damit die Fertigung synthetischer Isolationen, die seit Jahrzehnten auf fossilen Brennstoffen wie Kohle und Erdgas basiert, grundlegend verändert. PrimaLoft® P.U.R.E.™ ist ein ganzheitlicher Ansatz, der Materialien, technische Abläufe, Anlagen und Energieerzeugung perfekt aufeinander abstimmt, womit eine signifikante Senkung des CO2-Ausstoßes möglich ist. Die hauseigene Produktionstechnik spart bis zu 70 % der CO2-Emissionen im Vergleich zu den in der Branche immer noch weit verbreiteten traditionellen Methoden.

„PrimaLoft® P.U.R.E.™ ist in unserem Unternehmensziel ein großer Schritt nach vorn und ein wichtiger Baustein unserer Relentlessly Responsible™ Mission, der die Art und Weise, wie wir unsere Produkte herstellen, in den Fokus rückt. Wir nehmen jedes Material, jede Rezeptur, jeden Prozess und jede Ausrüstung genau unter die Lupe mit dem Ziel, CO2-Emissionen zu reduzieren und gleichzeitig unsere Produktqualität und Leistungsmerkmale zu erhalten,“ sagte Mike Joyce, Präsident und CEO von PrimaLoft.

Drei neue Produkte stehen mit der neuesten Version der PrimaLoft® P.U.R.E.™-Herstellungstechnologie für Markenpartnern zur Verfügung und werden in deren Kollektionen voraussichtlich ab der Saison Sommer bzw. Winter 2022 verwendet werden. PrimaLoft® Gold Insulation P.U.R.E.™, PrimaLoft® Silver

Insulation P.U.R.E.™ und PrimaLoft® Black Insulation P.U.R.E.™. Alle neuen Isolationsprodukte werden aus 100 % recyceltem Polyester hergestellt.

Joyce weiter: „Diese bedeutende Veränderung unserer Fertigungstechnik ist allerdings nicht der einzige Bereich, in dem wir CO2-Emissionen einsparen. Seit 1997 verwenden wir für die Herstellung von PrimaLoft-Produkten, wo immer möglich, recyceltes Post-Consumer-Material anstelle von Virgin Polyester, ohne die Leistung zu beeinträchtigen. Das trägt, unabhängig von PrimaLoft® P.U.R.E.™, schon erheblich zur Senkung unserer Emissionen bei. Wir haben ermittelt, dass wir allein dadurch seit 2015 rund 16.000 Tonnen CO2 eingespart haben. Wir gehen davon aus, dass sich unser gesamter CO2-Fußabdruck weiter drastisch reduzieren wird, wenn wir die PrimaLoft® P.U.R.E.™ Technologie Stück für Stück auf unsere gesamte Produktpalette erweitern.“

Die neue Fertigungstechnologie ermöglicht es Herstellern besonders umweltschonende Produkte zu fertigen, deren CO2-Fußabdruck durch PrimaLoft® P.U.R.E.™ drastisch reduziert werden kann. Bereits zum kommenden Herbst-Wintersaison 2021/22 sind erste Produkte mit der ursprünglichen Version von PrimaLoft® PURE™ (knapp 50 Prozent CO2-Reduktion) im Handel erhältlich. Darunter Modelle von Marken wie Patagonia, Alpkit, Bergans of Norway, Kodiak, PYUA und Viking. Die bekannte Menswear-Fashionbrand Stone Island hat ebenfalls angekündigt, PrimaLoft® P.U.R.E.™ ab Herbst 2022 zu verwenden.

Einen weiteren wichtigen Schritt in Richtung Reduktion von Kohlenstoffdioxidemissionen plant PrimaLoft® durch die Zusammenarbeit mit dem US-Firma Origin Materials zu machen, die sich auf die Entwicklung CO2-negativer Materialien spezialisiert hat. Das gemeinsame Programm arbeitet an Hochleistungsisolationsfasern für die Bekleidungsbranche, basierend auf CO2-negativem PET und Next-Generation-Polymeren, die aus Holzabfällen gefertigt werden. Die Zusammenarbeit wurde im April 2021 verkündet.

(c) Berto
Japan Calling
23.09.2021

“The Empathy Collection” by BERTO

For the Fall-Winter 2022/2023 BERTO divided their PREMIUM DENIM FABRICS collection into 5 themes.

The first one is ICONIC, where clients can find the “mainstream” proposal, the authentic denim NO SEASON, timeless fabrics with high versatility. From the 100% cotton with salt and pepper look, to the comfort denim really slubby, to the light shirting fabric. Into this theme there are also the Berto NOS, always available for all clients’ needs.

The second theme is BLACK BLOOD. Into this theme clients find Double Black fabrics that have two souls: one made by overdyed sulfur denims, for a washed and aggressive look, and the other given by a reactive black weft, inspired by elegance and sophistication. In addition, we propose to clients also some overdyed reactive fabrics for an intense black look.

For the Fall-Winter 2022/2023 BERTO divided their PREMIUM DENIM FABRICS collection into 5 themes.

The first one is ICONIC, where clients can find the “mainstream” proposal, the authentic denim NO SEASON, timeless fabrics with high versatility. From the 100% cotton with salt and pepper look, to the comfort denim really slubby, to the light shirting fabric. Into this theme there are also the Berto NOS, always available for all clients’ needs.

The second theme is BLACK BLOOD. Into this theme clients find Double Black fabrics that have two souls: one made by overdyed sulfur denims, for a washed and aggressive look, and the other given by a reactive black weft, inspired by elegance and sophistication. In addition, we propose to clients also some overdyed reactive fabrics for an intense black look.

The third theme is EVERYDAY PLUSH. With “everyday plush” we want to imagine the desire to dress as if surrounded by a warm hug. In fact, this capsule includes Cashmere denim that ensure warm and soft feeling to the wearer; and “soapy-denim”, a fabric made with cotton and viscose that gives a soft and fluid hand. Moreover, cotton mixed with nylon gives the fabric a technical hand and an elegant image while maintaining stretch performance, lightness and softness.

The fourth theme is JAPAN CALLING. The rough touch-feel and the authentic aesthetic as the true Japanese denim are the main features of the fabrics belonging to this theme. The clients here can find high weight 100% cotton denim fabrics with authentic image and structured weave. To complete the capsule a special blend is available: fabrics with a Tencel slubby weft that gives soft and fluid touch together with a rough image.

Last but not least, the fifth theme: MOTHER NATURE. The container of all the most sustainable Berto fabrics, from Organic cotton fabrics GOTS certified, to Recycled cotton fabrics GRS certified, made regenerating their own production waste.

Linked with this last theme the company will present during BLUEZONE by MUNICH FABRIC START a special capsule collection of garments made with our PIANETA FABRIC, GRS certified and made with recycled cotton coming from their own waste of production. The same waste has been used by CADICA GROUP, an Italian premium trims maker, to do the SPECIAL LABELS and HANGTAGS of this capsule.

More information:
Berto Denim
Source:

EFFE-BI SRL PR & COMMUNICATION for BERTO

Asahi Kasei to reshape its ROICA™ premium stretch fiber business global production strategy (c)ROICA™
ROICA™ premium stretch fiber
22.09.2021

Asahi Kasei to reshape its ROICA™ premium stretch fiber business global production strategy

  • Asahi Kasei Corporation markets premium stretch fiber under the brand of ROICA™, with superior performance features enabled by integrated production from raw material to yarn based on its advanced technology.
  • The specialized global holding operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with strategic sales facilities around the world.

With deep regret, Asahi Kasei has taken the decision to restructure its production strategy in order to face the new, unexpected and critical market situation. As part of this process, the production and sales of ROICA™ at its German subsidiary, Asahi Kasei Spandex Europe GmbH in Dormagen, will be discontinued by March 31, 2022.
 

  • Asahi Kasei Corporation markets premium stretch fiber under the brand of ROICA™, with superior performance features enabled by integrated production from raw material to yarn based on its advanced technology.
  • The specialized global holding operates its global ROICA™ business having production sites in Japan, Thailand, Taiwan, China, and Germany with strategic sales facilities around the world.

With deep regret, Asahi Kasei has taken the decision to restructure its production strategy in order to face the new, unexpected and critical market situation. As part of this process, the production and sales of ROICA™ at its German subsidiary, Asahi Kasei Spandex Europe GmbH in Dormagen, will be discontinued by March 31, 2022.
 
Recognizing the paramount importance of the European market, especially when it comes to smart innovation where ROICA™ is a leader, and with the goal of continuing the excellent longtime work with valued partners, customers and supply chains, Asahi Kasei will continue to develop sales, technical and marketing services in Europe through Asahi Kasei Europe, the European regional headquarters of the Asahi Kasei Group. It will especially focus on ROICA™ added value products manufactured at its ROICA™ production sites in Asia.
 
Through this process, Asahi Kasei will reshape the efficiency and productivity of its global ROICA™ operation by keeping a strong focus on responsible innovation and sustainability in close communication, and safeguarding its business partners.
 
As a manufacturer of superior quality, highly functional and sustainable ROICA™ products, Asahi Kasei will continue its journey of responsible innovation aiming to provide solutions to the textile industry and to contemporary consumers, by enhancing production capabilities and expertise at the global sites supported by an expert, wise and efficient company.

More information:
ROICA™ Asahi Kasei Fibers
Source:

GB Network

16th World Pultrusion Conference - CALL FOR PAPERS
WPC2022
22.09.2021

16th World Pultrusion Conference - CALL FOR PAPERS

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The EPTA – European Pultrusion Technology Association organizes in cooperation with the ACMA – American Composites Manufacturers Association - the 16th World Pultrusion Conference on 03 – 04 March 2022 in Paris, France (as a “hybrid event”, this conference will also have the option of online access). The conference is one of the leading pultrusion events in the world. The event takes place just before the JEC World 2022 in Paris (08 – 10 March 2022).

The presentations are to document innovations in the following subject areas of pultruded reinforced plastics:

● Market development in Europe, USA, Asia
● Innovative applications
● New Markets: Ideas for potential new applications with pultruded shapes or systems
● Sustainability: Technical possibilities, recycling, etc.
● Raw materials
   ○ Development of fibres
   ○ Development of resins
● Construction / Testing / Calculation
● Processes

The presentation language will be English. Deadline for paper submission (title, short abstract, speaker name and address) until 15th October 2021 to info@pultruders.com.
 
The European Pultrusion Technology Association was created in 1989 by a group of leading European pultruders with the mission of supporting the growth of the pultrusion industry by maximising external communication efforts and encouraging knowledge sharing between members. Since 2006, the association has existed under the umbrella of the AVK – Federation of Reinforced Plastics in Frankfurt, Germany. Membership of EPTA is open to all companies and individuals worldwide wishing to further the application of pultruded profiles. For further information visit http://www.pultruders.com.

Duarte will release its SS22 collection at WHITE Milano (c) C.L.A.S.S.
16.09.2021

Duarte will release its SS22 collection at WHITE Milano

After being rewarded with the 2021 C.L.A.S.S. Icon Award, Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed in collaboration with C.L.A.S.S. ecohub. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

The inspiration behind this collection is the superhero Tadao – Ana Duarte’s dog – which is the World Keeper fighting against the environmental issues mankind has generated.

After being rewarded with the 2021 C.L.A.S.S. Icon Award, Portuguese brand Duarte is ready to present its Spring/Summer 2022 collection developed in collaboration with C.L.A.S.S. ecohub. The streetwear designer Ana Duarte has worked in close contact with the Milanese hub in order to create a 40 pieces collection where the approach to materials, suppliers, new business models and communication could include and support a holistic view of the sustainable values aligned with style, performances, look and touch and Duarte identity.

The inspiration behind this collection is the superhero Tadao – Ana Duarte’s dog – which is the World Keeper fighting against the environmental issues mankind has generated.

With the support of WHITE and its WSM (WHITE Sustainable Milano), Duarte’s creations will be featured online on the digital space of WSM-WHITE website, as well as being shown in a dedicated physical booth on September during Milan Fashion Week. The collection will also be presented on its new brand page on Renoon, an online platform devoted to Responsible Shopping. In addition, Duarte will be supported by IDEE Brand Platform in the development of commercial activities for the SS22 collection.

(c) AYCANE
15.09.2021

AYCANE: Neue Marke für den Eishockeysport und innovative Sportbekleidung

Die neue Textilschmiede AYCANE aus der Schweiz hat sich auf funktionale Unterwäsche für Hockeyspielerin und Hockeyspieler fokussiert. Die Kollektion besteht aus Hockey-Baselayern und -Socken für Männer, Frauen und Kinder, einer Trainingskollektion für Männer, einer T-Shirt-Linie für Kinder, Recharge-Produkten für Männer sowie Accessoires. Im Frühjahr 2022 soll die Trainingskollektion für Frauen folgen.

AYCANE optimiert die Steuerung der Körpertemperatur sowie die Atmungsaktivität durch High-Tech-Stoffe, die exklusiv in Italien entwickelt wurden. Sie leiten Feuchtigkeit vom Körper weg, bieten dabei maximale Bewegungsfreiheit und beschleunigen die Regeneration. Schutz und Komfort gewährt ein schnittresistenter Stoff, der angenehm auf der Haut und zugleich sehr elastisch ist.

Die neue Textilschmiede AYCANE aus der Schweiz hat sich auf funktionale Unterwäsche für Hockeyspielerin und Hockeyspieler fokussiert. Die Kollektion besteht aus Hockey-Baselayern und -Socken für Männer, Frauen und Kinder, einer Trainingskollektion für Männer, einer T-Shirt-Linie für Kinder, Recharge-Produkten für Männer sowie Accessoires. Im Frühjahr 2022 soll die Trainingskollektion für Frauen folgen.

AYCANE optimiert die Steuerung der Körpertemperatur sowie die Atmungsaktivität durch High-Tech-Stoffe, die exklusiv in Italien entwickelt wurden. Sie leiten Feuchtigkeit vom Körper weg, bieten dabei maximale Bewegungsfreiheit und beschleunigen die Regeneration. Schutz und Komfort gewährt ein schnittresistenter Stoff, der angenehm auf der Haut und zugleich sehr elastisch ist.

More information:
Sportbekleidung AYCANE
Source:

crystal communications

30.08.2021

The Renewable Carbon Initiative RCI is joining forces

  • From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

  • From fossil to renewable materials: Members advocate policy analysis and focused implementation of the renewable carbon strategy

The members of the Renewable Carbon Initiative (RCI) (www.renewable-carbon-initiative.com), founded in September 2020, have joined forces to shape the transition from the fossil to the renewable age for the chemical and materials industry. This means spreading the concept of renewable carbon and developing new value chains based on renewable carbon as a feedstock.

In the meantime, several activities have started from which future members can benefit as well. First and foremost is the kick-off to comprehensive policy analysis. What influence will forthcoming regulation have on chemicals, plastics, and other materials? When and where should the renewable carbon idea be emphasized and referred to?

The policy analysis will examine pending policies in the European Union – and a later expansion to America and Asia is planned as well.

A particular focus will be placed on upcoming policies and regulations and how they impact renewable carbon. The members are currently deciding on where to start specifically, but questions that may be considered are: What does the new climate law and the “Fit for 55-Package” mean for chemicals and materials? What can be expected from REACH and microplastics restrictions? How relevant is the “Sustainable Products Initiative” and the coming restrictions for Green Claims? Circular Economy, Zero Pollution and Sustainable Financing are keywords of the future European landscapes, which might become very concrete for chemistry and materials in the next few years. To what extent the concept of renewable carbon for materials is considered in policy already and how it could be further introduced in future legislation are two of the main questions investigated in the working group “Policy”.

This working group is open to all members of RCI. Policy experts provide the respective analysis as a foundation, organising discussions between members of the policy group and plan meetings with policymakers to introduce the Renewable Carbon concept.

Additional working groups have been created, one with a focus on communication, the other looking at the development of a renewable carbon label. In early September, a renewable carbon community will be launched as a starting point for even more interaction between the members, to discuss strategies, create new value chains and start project consortia.

The Renewable Carbon Initiative (RCI) is a dynamic and ambitious group of interested parties. Membership numbers have now more than doubled since the launch almost a year ago, with RCI now boasting 25 members, 6 partners and over 200 supporters. It welcomes all companies that are on the way to transform their resource base from fossil to renewable.

More information:
Renewable Carbon Initiative
Source:

nova-Institut für politische und ökologische Innovation GmbH für RCI