From the Sector

Reset
33 results
19.10.2021

Teijin to boost Heat-Resistant Carbon Fiber Prepreg Production

Teijin Limited announced today that its carbon fiber subsidiary Renegade Materials Corporation, a leading U.S.-based supplier of highly heat-resistant thermoset prepregs, resins and adhesives for the aerospace industry, will expand its prepreg production by 2.5 times approximately. The increased capacity, which aligns with Renegade’s capacity expansion strategy at the Miamisburg, Ohio location, is the result of a USD 4 million investment made in December 2019 and the construction was started in March 2020. Operation of the new production lines will commence January 2022.

Renegade Materials' heat-resistant thermoset prepregs, resins and adhesives are well trusted by U.S. and European aircraft manufacturers and aircraft engine suppliers.

Renegade Materials will showcase its high heat-resistant thermoset prepreg at the Composites and Advanced Materials Expo (CAMX), one of the largest, most comprehensive composites and advanced materials event in North America, at the Dallas Convention Center in Dallas, Texas, from October 19 to 21.

Teijin Limited announced today that its carbon fiber subsidiary Renegade Materials Corporation, a leading U.S.-based supplier of highly heat-resistant thermoset prepregs, resins and adhesives for the aerospace industry, will expand its prepreg production by 2.5 times approximately. The increased capacity, which aligns with Renegade’s capacity expansion strategy at the Miamisburg, Ohio location, is the result of a USD 4 million investment made in December 2019 and the construction was started in March 2020. Operation of the new production lines will commence January 2022.

Renegade Materials' heat-resistant thermoset prepregs, resins and adhesives are well trusted by U.S. and European aircraft manufacturers and aircraft engine suppliers.

Renegade Materials will showcase its high heat-resistant thermoset prepreg at the Composites and Advanced Materials Expo (CAMX), one of the largest, most comprehensive composites and advanced materials event in North America, at the Dallas Convention Center in Dallas, Texas, from October 19 to 21.

Source:

Teijin Carbon Europe GmbH

Logo AMAC
AMAC und REACH agree on cooperation
20.04.2020

Strategic Cooperation between REACH and AMAC

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Strategic Cooperation in Advanced Materials and Composite Machine Technologies between REACH Group/China and AMAC/Germany

A close cooperation, especially in difficult times like the Covid-19 crisis, is more and more important for sustainable success. Today, Reach Group/China and AMAC/Germany signed a cooperation agreement to
strengthen their business between China and Europe in the field of advanced materials and composite machine technologies.

Reach Group, based in Shanghai is a comprehensive group company present in the composite industry since 1996. AMAC is an expert advisor and business enabler in composite solutions based in Aachen, Germany.
Now the companies want to cooperate in the field of materials on Thermoplastic composites, bio-based materials, materials for additive manufacturing, additives for high performance and in the field of composite machine technologies on tape placement solutions, continuous lamination machines, 3D-printing as well as on advanced automated thermoset processing.

The cooperation will be presented at the next China Composite Expo on September 2-4, 2020 in Shanghai.

Source:

AMAC

(c) A. Monforts Textilmaschinen GmbH & Co. KG
24.01.2020

Talking sustainability with Monforts denim customers

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

In the latest short film released on the Monforts YouTube Channel – captured at the recent Denim Première Vision show in London – some of the leading global manufacturers discuss their initiatives for more sustainable denim production.

Cone Denim, based in Greensboro, North Carolina, for example, can lay claim to having put in place its first environmental control measures back in the 1940s when the company first started recycling its water.

“It was a method of efficiency even back then, eighty years ago,” says Gabriel Magopat, of the company’s UK customer service centre, “but  producing high quality products is another method of being sustainable and of being efficient, and I think that’s what Cone stands for. We have an amazing history.”

Cone Denim is known for its signature S Gene® stretch denims which have traditionally incorporated polyester components to provide the stretch. It has now partnered with Intrinsic Advanced Materials of Gastonia, also in North Carolina, to introduce patent-pending CiCLO stretch polyester fibres into its denim collections. 

While still being synthetic based, CiCLO polyester is able to biodegrade in marine environments, wastewater treatment plants and landfill conditions, at rates similar to natural fibres like wool. 

This more sustainable solution for stretch is also being introduced to China for the first time by another leading denim supplier, Advance Denim.

“Advance Denim is spending its resources on being the most technologically advanced company in China, and also the most sustainable,” says Mark Ix, the company’s Director of Marketing. “We are investing heavily in our manufacturing to save both water and chemicals to create cleaner products.”

Monforts denim customer Berto is a family-owned company with its main denim mill in Bovolenta, a small rural town near to Padua in the north east of Italy, where respect for the environment has always been a must.

“The family has always been focused on respect for the environment,” says Berto’s Marketing Manager Francesca Palento. “In particular, we have a river next to the company from which we take our water for production and we then return it cleaner than it was before. We are also now producing GOTS and Global Recycling Standard jean produced with yarns made from our own internal waste production.”

Pakistan’s Soorty has recently received Cradle to Cradle Gold certification – the most stringent and exacting sustainable standard currently in existence – for its Pure D range of denims. These are produced using the company’s proprietary Zero Waste Water dyeing technology, in combination with the most advanced Monforts finishing machines. 

“Our very latest collection is called Climate Jeans, because every single product we now produce draws attention to the climate emergency we are living through right now,” says Eda Dikman, Soorty’s Marketing Communications Manager. “Sustainability is very important to us because we produce at scale and all of the actions we take reflect on the planet.”

SGL Carbon und Solvay schließen Kooperation zur Entwicklung von im hohen Maße konkurrenzfähigen und fortschrittlichen Carbonfaser-Verbundwerkstoffen für Primärstrukturen in der Luftfahrt (c) SGL CARBON SE
SGL Carbon Large-Tow-IM-Carbonfaser Produktion am US-Standort Moses Lake
03.12.2019

Collaboration between SGL Carbon and Solvay

SGL Carbon and Solvay collaborate to develop highly-competitive advanced carbon fiber composites for aerospace primary structures

SGL Carbon and Solvay have entered into a joint development agreement (JDA) to bring to market the first composite materials based on large-tow intermediate modulus (IM) carbon fiber. These materials, which address the need to reduce costs and CO2 emissions, and improve the production process and fuel efficiency of next-generation commercial aircraft, will be based on SGL Carbon’s large-tow IM carbon fiber and Solvay’s primary structure resin systems.

The agreement encompasses both thermoset and thermoplastic composite technologies. It builds on Solvay’s leadership in supplying advanced materials to the aerospace industry and SGL Carbon’s expertise in high-volume carbon fiber manufacturing.

SGL Carbon and Solvay collaborate to develop highly-competitive advanced carbon fiber composites for aerospace primary structures

SGL Carbon and Solvay have entered into a joint development agreement (JDA) to bring to market the first composite materials based on large-tow intermediate modulus (IM) carbon fiber. These materials, which address the need to reduce costs and CO2 emissions, and improve the production process and fuel efficiency of next-generation commercial aircraft, will be based on SGL Carbon’s large-tow IM carbon fiber and Solvay’s primary structure resin systems.

The agreement encompasses both thermoset and thermoplastic composite technologies. It builds on Solvay’s leadership in supplying advanced materials to the aerospace industry and SGL Carbon’s expertise in high-volume carbon fiber manufacturing.

“For Solvay, this is an opportunity to lead the aerospace adoption of a composite material based on 50K IM carbon fiber. This is a highly competitive value proposition that brings more affordable high-performance solutions to our customers. We see this as the first step in a long-term partnership,” said Augusto Di Donfrancesco, member of Solvay’s executive committee.

“By combining SGL’s carbon fiber expertise in our newly developed, unique 50K IM fiber with Solvay’s resin formulation and aerospace market expertise, both partners are aiming to develop an advanced aerospace material system. This alliance supports our strategic direction and accelerates our growth in the attractive aerospace market,” said Dr. Michael Majerus, spokesman of the management board of SGL Carbon.

Composite materials for aerospace applications represent a multi-billion-dollar market that is expected to grow strongly in the coming decade. Solvay and SGL Carbon are uniquely positioned to develop solutions to address the needs of this market.

More information:
Solvay SGL Carbon Carbonfaser
Source:

SGL CARBON SE

07.11.2019

JEC ASIA 2019

JEC Asia 2019 will open its doors in six days within a very positive and dynamic environment for the Composites industry. The South Korean government has decided to develop a whole Composites ecosystem. That goal will be achieved thanks to three strategic pillars: increasing R&D investment in the composites sector for equipment and machines; diversifying its materials and intermediate product providers; reinforcing excellence in research and development with major academic institutions such as Hanyang University and UNIST. Therefore, JEC Asia is a must-attend event for foreign companies to meet with this whole ecosystem.

JEC Asia 2019 will open its doors in six days within a very positive and dynamic environment for the Composites industry. The South Korean government has decided to develop a whole Composites ecosystem. That goal will be achieved thanks to three strategic pillars: increasing R&D investment in the composites sector for equipment and machines; diversifying its materials and intermediate product providers; reinforcing excellence in research and development with major academic institutions such as Hanyang University and UNIST. Therefore, JEC Asia is a must-attend event for foreign companies to meet with this whole ecosystem.

More than 200 companies from 49 countries will attend this new edition for three days of Composites Innovation, Business, and Networking. For its 12th edition, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific and specifically from South Korea. They will present their latest capabilities and innovations to the composite’s community and the strategic end-user’s market. Companies like Toray Advanced Materials, Hyosung, Kolon, Hanwha Q Cells & Advanced Materials, Hankuk Carbon, Arkema Korea, and Samyang Corp. are amongst the participants, to name a few.

“The Composites Industry in Asia Pacific is dynamic and largely contributes to the global growth of the Industry. JEC Asia is the major composites platform in the region, where the full value chain gathers from raw material producers, intermediate and final processors. It also encompasses the downstream of the value chain, the original equipment manufacturers (OEM), and end-users. For its 12th edition, JEC Asia will showcase numerous features: an extensive conference program that includes the ICF (International Carbon Festival co-organized with the KCTech), composites tours and the coveted JEC Innovation Awards etc. All these have been crafted to provide the composites industry with targeted networking opportunities and an unrivaled event to develop and share knowledge on composite materials”, says Christian STRASSBURGER, Events Director APAC.

Source:

JEC Group

Michael Effing (c) Textechno
Michael Effing
18.02.2019

Michelman counts on Textechno´s FIMATEST

Michelman, a global developer and manufacturer of environmentally friendly advanced materials, including sizing for glass and carbon fiber, has invested in the FIMATEST adhesion measurement system to ensure their sizing solutions continue to contribute to enhanced performance of composite parts.

Michelman, a global developer and manufacturer of environmentally friendly advanced materials, including sizing for glass and carbon fiber, has invested in the FIMATEST adhesion measurement system to ensure their sizing solutions continue to contribute to enhanced performance of composite parts.

“As we continue our vision to be the interface expert, it is critical to have analytical equipment that can efficiently fine-tune our sizing to optimize adhesion properties. This is one of the key performance attributes we provide our customers, and the fact that the Textechno FIMATEST system works according to the fiber pull-out principle makes it extremely valuable”, explains Steve Bassetti, Michelman’s Global Marketing Director for Industrial Manufacturing. “We have utilized this equipment in our development lab for almost two years, and it is suited for any fiber-matrix combination we have developed. It has been helpful that Textechno developed these instruments because they are, and will continue to be, a great benefit to the entire Composites industry. We look forward to supporting Textechno in establishing more standardization for the Industry regarding fiber-matrix-adhesion and processing properties.“

Dr. Ulrich Mörschel, CEO of Textechno, added: “We are proud that Michelman, the industry’s leading interface expert, invested in our testing system.” Bassetti further elaborated on the system’s benefits: “For Michelman’s customers, this equipment has allowed for great collaboration, increased screening of sizing concepts, and a more robust and efficient product development process.”

 

 

More information:
Michelman
Source:

AMAC Communications

07.02.2019

Hexcel Exhibits at Aero India 2019

Hexcel is exhibiting at the Aero India show for the sixth time, continuing to support customers in the Indian subcontinent and throughout Asia. This year’s show takes place in Bangalore from February 20-24 (Stand AB2.5D, Hall AB) to promote a range of carbon fibers and composites that are benefiting Indian aerospace manufacturers for commercial aircraft, helicopters and space programs.

To coincide with the show, Hexcel is announcing the opening of its new sales office, Hexcel Composites India LLP. The office is located in Bangalore and will be fully operational in March 2019. Mr Vijay Sharma, Sales Manager, and Mr Ram Kumar, Technical Representative, will manage the sales activities and support key customers in the region.

Hexcel has supplied carbon and glass fiber fabrics, prepregs, honeycombs and adhesives to Indian aerospace companies for more than 28 years, including Hindustan Aeronautics Ltd (HAL), National Aerospace Lab (NAL), Indian Space Research Organisation (ISRO), Vikram Sarabhai Space Centre (VSSC) and TATA Advanced Materials.

Hexcel is exhibiting at the Aero India show for the sixth time, continuing to support customers in the Indian subcontinent and throughout Asia. This year’s show takes place in Bangalore from February 20-24 (Stand AB2.5D, Hall AB) to promote a range of carbon fibers and composites that are benefiting Indian aerospace manufacturers for commercial aircraft, helicopters and space programs.

To coincide with the show, Hexcel is announcing the opening of its new sales office, Hexcel Composites India LLP. The office is located in Bangalore and will be fully operational in March 2019. Mr Vijay Sharma, Sales Manager, and Mr Ram Kumar, Technical Representative, will manage the sales activities and support key customers in the region.

Hexcel has supplied carbon and glass fiber fabrics, prepregs, honeycombs and adhesives to Indian aerospace companies for more than 28 years, including Hindustan Aeronautics Ltd (HAL), National Aerospace Lab (NAL), Indian Space Research Organisation (ISRO), Vikram Sarabhai Space Centre (VSSC) and TATA Advanced Materials.

Hexcel’s high strength and intermediate modulus carbon fiber range has been augmented by the launch of HexTow® HM63, a high modulus carbon fiber that has the highest tensile strength of any existing HM fiber. HexTow® HM63 provides outstanding translation of fiber properties in a composite, including superior inter-laminar shear and compression shear strength. HexTow® HM63 is therefore ideal for any high stiffness and strength-critical applications including space, satellites, UAV, commercial aerospace and helicopters.

Source:

AGENCE APOCOPE

(c) JEC Group
21.11.2018

Celebration of Composite Materials at the 11th JEC Asia

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

  • +230 companies
  • 45 speakers
  • +7,000 professional visits
  • 49 countries represented
  • 12 JEC Innovation Awards
  • +450 Business meetings
  • 3 Composites Tours
  • Top 3 visitors’ countries: Korea - China - Japan

 

The annual meeting for the Asia-Pacific professionals of the composites industry, organized for the second time in a row in Seoul, has met its high expectations attracting +12% participants and acting as a major showcase for the composites industry in the region.

KEY FIGURES

  • +230 companies
  • 45 speakers
  • +7,000 professional visits
  • 49 countries represented
  • 12 JEC Innovation Awards
  • +450 Business meetings
  • 3 Composites Tours
  • Top 3 visitors’ countries: Korea - China - Japan

 

Gauging from the attendance of more than 7,000 professional visits from 49 countries, Eric PIERREJEAN, CEO of JEC Group, has already announced during the opening ceremony that JEC Asia 2019 will return next year on November 13, 14, 15, 2019. This ceremony was attended by industrialists, academics and officials, reflecting the huge interest that composite materials generates. Thus, at this ceremony we could notice the participation of Mr. BANG Yun Hyuk, President of KCTECH, Mr. Song, Ha Jin Jeonbuk Provincial Governor, Mr. HAN Byung Do, Senior secretary to the South Korean President for political affairs, Mr. CHOI Jin Hyuk, Director at MOTIE, Mr. KIM Yang Won, Vice Mayor of Jeonju, demonstrating the whole support of the Korean community; and Mr. Fabien PENONE, French Ambassador, was also present to underline the strong links and industrial interactions between Korea and France.

Hosting, this year again, the International Carbon Festival organized by KCTECH and the Jeonju region, JEC Asia also provided a comprehensive program dedicated to the Automotive professionals with a leadership circle attended by top stakeholders of the industry worldwide, top-notch conferences on automotive automated processes and composite applications for structural parts with speakers from Hyundai Motor Group, e-Xstream Engineering, L&L Products, Cobra International, Hanwha Advanced Materials, Daimler, Hankuk Carbon, Arkema, Cetim, Saertex & Co. KG to name a few.

“Aeronautics: 53% and beyond” conferences took place and attracted many attendees to discover new composites solutions and their wider use in this sector with Stratasys,IS Group, Cevotec… JEC Asia also offered its participants a chance to find out new business opportunities, highlighting the most relevant for the region and various application sectors.
All in all, the show floor was filled with innovations as JEC Asia 2018 showcased innovative parts and awarded 12 composites International champions among which 3 were about automotive, at the JEC Innovation Awards ceremony.

Also, to be noted at JEC Asia was the focus on networking with pre-arranged Business meetings that generated +450 qualified one-to-ones over the 3 days. Likewise, 3 composites tours opened exclusive doors to attendees when they visited Hanyang University, the composite architecture of the House of Dior, LG Hausys & Kolon and a day trip in Jeonju region and the Carbon Valley of the KCTECH.
For the first time, JEC Asia teamed up with MAI Carbon to offer a brand-new Student Program that keeps abreast of composite-industry needs to hire young, committed well-trained engineers. The two-part program included workshops with a focus on theoretical foundations and a guided tour through the JEC Asia trade show and the innovation planet.

More information:
JEC-Gruppe
Source:

JEC Group

Internatioal Conference on Natural Fibers 2019 (c) University of Minho
Internatioal Conference on Natural Fibers 2019
01.10.2018

International Conference on Natural Fibers 2019

The fourth edition of the ICNF - International Conference on Natural Fibers – Smart Sustainable Solutions will be taking place from 1-3 July 2019 in Porto, Portugal, is accepting extended abstracts of two full pages until 31st January 2019.
The Conference, focused on the latest scientific and technical advances in natural fibers will bring together more than 300 participants from universities, research and technological centers and companies.

The fourth edition of the ICNF - International Conference on Natural Fibers – Smart Sustainable Solutions will be taking place from 1-3 July 2019 in Porto, Portugal, is accepting extended abstracts of two full pages until 31st January 2019.
The Conference, focused on the latest scientific and technical advances in natural fibers will bring together more than 300 participants from universities, research and technological centers and companies.

Program topics
Following up the success of ICNF2017 held in Braga, Portugal, focusing on the topic ‘Advanced Materials for a Greener World’, next year’s ICNF is devoted to the topic ‘Smart Sustainable Solutions’.
The conference topics include:

•    New processes for natural fiber agriculture extraction and processing;
•    Natural fiber reinforced biopolymers;
•    Innovative natural fibers & structures;
•    Functional natural fibers;
•    Natural fiber modification techniques;
•    Advanced fibrous structures based on natural fibers;
•    Nanodimensional natural fibers;
•    Natural fiber based polymeric composites;
•    Green composites;
•    Natural fiber based cementitious composites;
•    Applications of natural fibers in high end sectors;
•    Analytics, modeling and prediction of properties and behavior;
•    Biomimetics;
•    Product development based on natural fibers;
•    Markets for natural fibers;
•    Sustainability of natural fibers: life cycle assessment studies;
•    Textile processing of natural fibers;
•    Properties & characterization of natural fibers & structures.

Natural Fibrenamics Award 2019
After the success of last editions, the Natural Fibrenamics Award is again included in the ICNF2019 program to award the best innovative products in the field of natural fibers. The innovative product applications will be shown during the Conference in a special showroom and evaluated by a selected jury in terms of innovation, design and functionality. The contest intends to be a showcase of the latest innovations in the field of natural fibers, both for the scientific and industrial communities.

The online abstract submission is open until January 31, 2019 at the official ICNF2019 website: www.icnf2019.fibrenamics.com

Rajiv Banavali (c) Huntsman Textile Effects
Rajiv Banavali
14.08.2018

Huntsman Textile Effects names new Global Vice President of Research & Technology

Huntsman Textile Effects is pleased to announce the appointment of  Rajiv Banavali as its new Global Vice President of Research and Technology, effective August 10. Rajiv will join the Textile Effects senior management as part of its global leadership team and will report directly to Rohit Aggarwal, President Textile Effects.

Rajiv joins from Honeywell International where he held several research and development leadership roles including his most recent, as Vice President, Chief Technology Officer, with its Advanced Materials division. He has more than 20 years’ experience in the development and execution of R&D strategies and the advancement of innovation platforms for both product and process technology roadmaps. Rajiv has proven success in leading large, global research organizations in the development and commercialization of technologies in the area of specialty chemicals, both at Honeywell and at his previous employer, Rohm & Haas.   

Huntsman Textile Effects is pleased to announce the appointment of  Rajiv Banavali as its new Global Vice President of Research and Technology, effective August 10. Rajiv will join the Textile Effects senior management as part of its global leadership team and will report directly to Rohit Aggarwal, President Textile Effects.

Rajiv joins from Honeywell International where he held several research and development leadership roles including his most recent, as Vice President, Chief Technology Officer, with its Advanced Materials division. He has more than 20 years’ experience in the development and execution of R&D strategies and the advancement of innovation platforms for both product and process technology roadmaps. Rajiv has proven success in leading large, global research organizations in the development and commercialization of technologies in the area of specialty chemicals, both at Honeywell and at his previous employer, Rohm & Haas.   

“As the global textiles industry transitions to new business models in an increasingly competitive and tightly regulated environment, it is now more important than ever that Huntsman Textile Effects remains innovative, flexible and close to our customers. We are extremely pleased to have in Rajiv, a highly experienced candidate with a global outlook and an acute commercial acumen, to lead a critical area of our business, focusing on advancing our sustainability agenda while progressing the research and innovation of our product portfolio,” said Rohit Aggarwal.

Rajiv holds a Ph.D. in Organic Chemistry from the University of Missouri, USA. Rajiv will be based in Singapore and will relocate from New Jersey, USA.
Rajiv succeeds Sarada Namhata who is retiring after five years in the role.

More information:
"Huntsman Textile Effects"
Source:

Huntsman Textile Effects

Oerlikon: AC-Automation Acquisition (c) Oerlikon
Georg Stausberg, CEO of Oerlikon Manmade Fibers Segment, Rolf Gänz, Managing Director of AC-Automation, and Ralf Schilken, CFO of Oerlikon Manmade Fibers Segment (from left, first row).
13.04.2018

Oerlikon: AC-Automation Acquisition

  • Oerlikon integrates automation solutions for largescale plants in technology portfolio

Remscheid, Germany / Pfäffikon, Schwyz, Switzerland - Oerlikon announced today that it has acquired Germany-based AC-Automation GmbH & Co. KG, an engineering company specializing in large-scale plant automation solutions for the textile and packaging industries. The two companies have been partnering since the early 1980s. The integration of AC-Automation in Oerlikon expands the market-leading technology portfolio of its Manmade Fibers Segment. It also marks a milestone in Oerlikon’s ongoing quest to offer innovative, fully automated and digitally networked Industry solutions in the manmade fiber industry.

  • Oerlikon integrates automation solutions for largescale plants in technology portfolio

Remscheid, Germany / Pfäffikon, Schwyz, Switzerland - Oerlikon announced today that it has acquired Germany-based AC-Automation GmbH & Co. KG, an engineering company specializing in large-scale plant automation solutions for the textile and packaging industries. The two companies have been partnering since the early 1980s. The integration of AC-Automation in Oerlikon expands the market-leading technology portfolio of its Manmade Fibers Segment. It also marks a milestone in Oerlikon’s ongoing quest to offer innovative, fully automated and digitally networked Industry solutions in the manmade fiber industry.

The 60 employees at AC-Automation’s Bernkastel-Kues and Augsburg locations will become part of Oerlikon’s Manmade Fibers Segment, which includes the leading brands Oerlikon Barmag and Oerlikon Neumag. The move will expand the Segment’s business model, adding another key core component to its current offering of production plants and technology solutions from melt to yarn, fibers, andnonwovens. Ultimately, Oerlikon will be able to offer customers a total solution from a single source, including automation logistics for packaging, high-bay storage, and other areas, which complement its current market-leading spinning and process technologies for the textile industry.

"We see our expanded overall offering as an Industry solution, reflecting the future of an even more efficient, digitized and profitable chemical fiber industry, especially for large-scale plants with daily production capacity of several hundred tons of polyester, nylon, polypropylene, or other manmade fibers,” explains Georg Stausberg, CEO of the Manmade Fibers Segment. Manmade fiber producers from China — the world’s most important market, generating more than 70 % of worldwide manmade fiber production — as well as companies from other fast-growing markets such as India, Turkey and the USA are also relying on automated and networked Industry total solutions.

"The acquisition and integration of AC-Automation’s automation solutions will provide new opportunities for our manmade fiber business. It enables the Segment to increasingly position itself as an Industry solution provider in combination with our own digitization solutions,” says Oerlikon Group CEO Dr. Roland Fischer. “As a leading provider of advanced materials, surface solutions and materials processing including the engineering and production of polymer plants, this acquisition marks another milestone in Oerlikon’s strategy to strengthen its businesses and thus sustain profitable growth.”

"After such a long partnership, we are excited to be able to benefit even more in the future as part of a global player in the textile industry. Our market access will further improve with the help of the Oerlikon
Group's sales and service network. For my employees, I am very pleased to be able to bring them into an international Group, in which there would be new opportunities and perspectives for them personally,”
said Rolf Gänz, AC-Automation’s Managing Director.

More information:
Oerlikon Automation
Source:

Oerlikon - Corporate Communications
and Public Affairs (Segment Manmade Fibers)

27.02.2018

JEC GROUP MAKES PARIS THE WORLD’S COMPOSITES CAPITAL

On March 6-8, 2018, Paris will host the largest international trade show for advanced materials: JEC World, which is organized by JEC Group. For three days, more than 43,000 professional visits from some 100+ countries will gather at the world’s most innovative platform for the materials and products that are revolutionizing our century. “One field where France is a global leader is the field of composites!” says JEC Group President and CEO Frédérique MUTEL.

COMPOSITES ARE GOING STRONG
The share of composites in the global economy is growing. The market for these products is worth 83 billion euros, for a volume of 11.23 million metric tons of volume (2017 statistics). Analysts are predicting a steady 5% growth by 2021. From the industrial viewpoint, composites are developing rapidly, with new automated processes for high-volume production.

On March 6-8, 2018, Paris will host the largest international trade show for advanced materials: JEC World, which is organized by JEC Group. For three days, more than 43,000 professional visits from some 100+ countries will gather at the world’s most innovative platform for the materials and products that are revolutionizing our century. “One field where France is a global leader is the field of composites!” says JEC Group President and CEO Frédérique MUTEL.

COMPOSITES ARE GOING STRONG
The share of composites in the global economy is growing. The market for these products is worth 83 billion euros, for a volume of 11.23 million metric tons of volume (2017 statistics). Analysts are predicting a steady 5% growth by 2021. From the industrial viewpoint, composites are developing rapidly, with new automated processes for high-volume production.

INNOVATION IN COMPOSITES
“Innovation is there with the raw materials, such as better-formulated resins (and even recyclable ones like thermoplastics) and higher-performance fibers like carbon, glass and aramid. Moreover, natural materials like starch for matrices and flax, hemp, sisal and bamboo for fibers are being introduced. There is also innovation in the ways composites are being used, and with the creation of completely new things like drones, electronic devices, hydrofoils and flying taxis. Composites are currently making progress everywhere there is a need for low weight and performance. They offer nearly infinite possibilities. These are truly the materials of the century. Designers are adopting them in a broad range of fields like smart cities, infrastructure, networks, transportation, medical devices, sports & leisure and design. Composites materials expand the field of possibilities.” explains Ms. MUTEL.

“MAKE IT REAL” AT THE 2018 JEC WORLD TRADE SHOW
To present the latest trends and innovations, the 2018 JEC World has even more surface area, with 68,000 square meters. The 1,350 exhibitors (from carbon fiber producer to auto builder, from designer to decorator, from research fellow to aircraft manufacturer) will display their latest advances. All stakeholders will be present at the show. JEC World received more than 40,000 professional visits last year, and is expecting 43,000 this year!

THE NEW “MUST” THINGS TO SEE
This year, JEC World will have four planets. Besides the aerospace, automotive and construction planets, there will be a new “Make it real” planet, which gives a preview of designer creations to be exhibited at the Ghent museum starting in October 2018. “We will show the many aspects of composites, and how these materials are being gradually incorporated into everyday objects,” adds Ms. MUTEL.
This year’s JEC World will feature a new “Composite Challenge” program that gives the floor to ten PhD students, who will be given five minutes to pitch their research projects with the help of a single slide. “True to its mission, the JEC Group has set up this new program to share the latest research on composites. But it is not just a way to share the most advanced knowledge, it also helps to bridge the gap between academics and the industry and to identify the industry’s next generation of leaders,” she says.
JEC World will also be the occasion to launch Flax & Hemp Fiber Composites, A Market Reality: The Biobased Solution for the Industry, a new book published by JEC Group on the use of plant-based materials.

KNOWLEDGE & NETWORKING PROGRAMS SUPPORTED BY JEC GROUP
The trade show will host well-known speakers, including Dirk AHLBORN, the CEO of Hyperloop Transportation Technologies, a company that is reinventing transportation with high-speed travel (up to 1,300 km/h, or 808 mph), and Yves ROSSY, aircraft pilot and inventor of the first jet-powered wingpack, with which he is able to reach speeds of up to 300 km/h, or 186 mph. The Startup Booster program will pay tribute to startups, and the JEC Innovation Awards program, to innovations. For the first time, the public will be invited to vote on these two programs!
Six new conferences will also address the latest technical advances that are moving the sector forward, and a Composites in Action program will present live demonstrations throughout the show, in three different places.

More information:
JEC World JEC Group
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE

20.02.2018

Hexcel Congratulates Airbus

On Febuary 20, 2018 – Hexcel congratulated Airbus on delivering the first A350-1000 to Qatar Airways earlier today, following successful FAA and EASA Type Certification on November 21.
Hexcel is a major supplier of advanced materials for the A350 XWB program, and composite materials make a significant contribution to the weight savings, performance and fuel efficiency of both aircraft in the family, the A350-900 and the A350-1000. This stretched version of the aircraft is 7 meters longer than the A350-900, carries an additional 40 seats, and offers similar unrivalled comfort and efficiency. Both versions are powered by latest generation Rolls-Royce Trent XWB engines.

Hexcel’s HexPly® M21E/IMA carbon fiber/epoxy prepreg is used to manufacture all composite primary structures of the aircraft, including the fuselage panels, keel beam, wing and empennage. The lower wing cover is the biggest single civil aviation part ever made from carbon fiber and spans 32 meters long.

On Febuary 20, 2018 – Hexcel congratulated Airbus on delivering the first A350-1000 to Qatar Airways earlier today, following successful FAA and EASA Type Certification on November 21.
Hexcel is a major supplier of advanced materials for the A350 XWB program, and composite materials make a significant contribution to the weight savings, performance and fuel efficiency of both aircraft in the family, the A350-900 and the A350-1000. This stretched version of the aircraft is 7 meters longer than the A350-900, carries an additional 40 seats, and offers similar unrivalled comfort and efficiency. Both versions are powered by latest generation Rolls-Royce Trent XWB engines.

Hexcel’s HexPly® M21E/IMA carbon fiber/epoxy prepreg is used to manufacture all composite primary structures of the aircraft, including the fuselage panels, keel beam, wing and empennage. The lower wing cover is the biggest single civil aviation part ever made from carbon fiber and spans 32 meters long.

A further advancement is the introduction of CFRP in other structural components such as the pylon upper spar and door surround. For the first time on an Airbus aircraft, Hexcel’s HexMC® carbon fiber/epoxy molding compound has also been used for the A350-1000 fuselage crutches.

“I send my congratulations to Airbus on delivering the first A350-1000 to Qatar Airways,” said Nick Stanage, Hexcel Chairman, CEO and President. “Hexcel is proud to be a partner-supplier to Airbus and to have Hexcel carbon fiber and composite materials incorporated into so many structural parts in the A350 XWB family.”

More information:
Hexcel’s HexPly® Airbus
Source:

AGENCE APOCOPE, Dorothée DAVID & Marion RISCH