From the Sector

• The Borvida™ portfolio introduces sustainable base chemicals to Borealis’ range of product offering
• The range will initially be based on non-food waste biomass, and chemically-recycled waste; in the future it will also draw from atmospheric carbon capture
• The traceability of the content will be based on Mass Balance, which is ISCC PLUS certified
• This is the next step in an ambitious sustainability journey, which will see Borealis move away from traditional fossil-based feed

Borealis is strengthening its EverMinds™ circular product offering with Borvida™, a range of sustainable base chemicals.

The Borvida portfolio will offer base chemicals or cracker products (such as ethylene, propylene, butene and phenol) with ISCC Plus-certified sustainable content from Borealis sites in Finland, Sweden and Belgium. The move is part of Borealis’ broader commitment to a Future-Positive Revolution, in which the unrivalled benefits of base chemicals and polymers can be enjoyed at minimal impact to the planet.   

The portfolio will initially comprise Borvida B, from non-food waste biomass, and Borvida C, from chemically-recycled waste. In the future, the range will evolve to include Borvida A, sourced from atmospheric carbon capture. Borvida is complementary and is the building block to Bornewables™, a portfolio of polyolefins based on renewably-sourced second generation feedstocks, and Borcycle™, which offers circular polyolefins produced from mechanically- and chemically-recycled plastic waste.

Borealis produces a wide range of base chemicals for use in numerous industries based on various feedstock, such as naphtha, butane, propane and ethane. Through its olefin units (steam cracker and propane dehydrogenation), it converts these into the building blocks of the chemical industry: ethylene, propylene and C4 hydrocarbons (butylenes, ethyl tertiary-butyl ether (ETBE) and butadiene), and C5-6 hydrocarbons (pygas, phenol) among others.

The basis of the Borvida portfolio is Mass Balance, a Chain of Custody model that enables sustainable content to be tracked, traced, and verified through the entire value chain, offering sustainability-assured products from feedstock to end product. Using this model, circular alternatives can be offered in a cost-effective and environmentally-conscious way, which can be scaled up quickly without compromising on quality or efficiency.

Borvida can be used for a wide range of different polymer and chemical applications, also beyond polyolefins (PO). Non-PO polymers, such as polycarbonates, acrylonitrile butadiene styrene (ABS), super absorbant polymer (SAP) and other chemicals, are utilised for various end applications including coatings, plasticizers, adhesives, automotive, electronics, lubricants, detergents, appliances and sports equipment.

Together with key strategic partners, including Neste and Covestro, Borealis strives to provide a long-term solution in order to allow value-chain partners to meet their sustainability goals. Borvida will enable our customers to increase the sustainability of their products, keeping them ahead of forthcoming legislative changes, and meeting their customers’ demands for climate-conscious products.

Introduced on a smaller scale in early 2020, early renewable base chemicals customers include Covestro. “The use of alternative sustainable raw materials is one important pillar of our strategic ambition to become fully circular”, comments Frank Dörner, Managing Director Covestro Procurement Services GmbH & Co. KG. “The new product line is a good example for joint solutions, another strategic pillar, in order to establish new and reliable supply chains creating benefits for our customers.”

Packaging solution made of 100% plastic recyclate delivers circular economy proof point
Borealis, a leading provider of innovative solutions in the fields of polyolefins, base chemicals and fertilizers, announces the successful launch of a new packaging solution produced entirely with post-consumer recycled (PCR) material. Developed in close collaboration with the German consumer and industrial goods company Henkel and two additional value chain partners, this truly sustainable packaging solution is further evidence of how mtm plastics GmbH, a member of the Borealis Group, is helping increase the circularity of plastics. The launch has significance for the consumer goods industry because the robustness of this new packaging solution provides further evidence that plastic recyclate is indeed suitable for a variety of demanding packaging applications, in this case a popular adhesive brand marketed by Henkel.

Value chain collaboration yields plastic bottle and nozzle composed of 100% PCR material
In 2016, Borealis acquired leading German recycler mtm plastics GmbH, which is now a member of the Borealis Group. By leveraging their respective areas of expertise and decades of experience as a virgin polyolefins producer and “upcycler”, respectively, Borealis and mtm plastics are exploring new growth opportunities with joint forces.

A success story originating from this exploration is a recently completed pilot project with Henkel, the global leader for adhesives, sealants and functional coatings. The companies have worked to develop a new packaging solution based on recycled material for the Made-at-Home all-purpose glue bottle and cap, which Henkel is marketing under its well-known Pattex brand.  The aim was to replace the virgin plastic material traditionally used for this packaging with a recyclate-based resin. The resin, however, had to fulfil the diverse material demands for packaging of an adhesive product.

After extensive and joint application development, a new bottle was developed with the proprietary mtm product Purpolen® PE, a high-quality polyethylene regranulate produced by mtm at its facilities in Niedergebra, Germany. Value chain partner KKT Kaller Kunststoff Technik GmbH, a plastics processor also based in Germany, manufactured the bottles. For the three separate components of the adjustable applicator nozzle, which is used for both filigree and wide-area gluing, high-quality Purpolen® PP polypropylene regranulate produced by mtm was identified as the ideal solution. German plastic components manufacturer bomo trendline Technik GmbH produced the applicator nozzles.

The new Pattex Made-at-Home packaging solution successfully passed extensive application tests, including a three-month storage test and other tests of mechanical properties. It was launched on the European market in 2018.

“Our commitment to leadership in sustainability is deeply embedded in our companies´ values,” explained Matthias Schaefer, Project Manager for Global Packaging Engineering at Henkel Adhesive Technologies. “We are at the forefront of the industry when it comes to new sustainability strategies in packaging.  Thus, we identified Pattex Made-at-Home as a candidate for exploring the use of recyclate instead of virgin plastics. This constructive collaboration with our partners proves the viability of 100% PCR material for an adhesive product like Made-at Home. It also underscores our efforts at Henkel to drive leadership in sustainability in the consumer goods sector.”

“As a virgin polyolefins producer, Borealis is thrilled to be among the pioneers in using plastic recyclate in new applications,” says Günter Stephan, Head of Borealis Circular Economy Solutions. “Even though momentum is gaining in the drive to increase the circularity of plastics, we still need to prove without a doubt within the industry that using recyclates – and even 100% PCR – is a suitable and effective option, even for demanding applications. Thanks to this successful value chain cooperation with our partners Henkel, KKT and bomo, we are giving plastics a second life and are thus one step closer to the goal of a more circular economy of plastics.”