From the Sector

Reset
12 results
14.06.2022

Epson auf der TexProcess 2022

Lokale On-Demand-Produktion ist heute angesagter denn je. Unternehmen der Modeindustrie vermeiden dank der so gewonnenen hohen Flexibilität bei der Herstellung von Textilien und Bekleidung teure Überproduktion und die Verschwendung von Ressourcen. Darüber hinaus erfüllen sie auf diese Weise die steigenden Anforderungen der Kunden nach einer nachhaltigen Herstellung. Gefordert werden dabei neben durchgehend transparenten Arbeitsprozessen auch ressourcenschonende Lieferketten. Epson wird auf der TexProcess 2022 mit Unterstützung von Partnerfirmen einen DTG-/DTF-Workflow und einen Sublimations-Workflow für eine nachhaltige, umweltschonende Produktion moderner, stylischer Textilien präsentieren.

Die Unternehmen DMIx by ColorDigital GmbH, Epson und Multi-Plot sind „Best Practice“-Partner im Bereich der digitalen Produktentwicklung bis hin zu kundenindividuellen Produktionstechniken, durch die eine Reduzierung der CO2-Emissionen sowie eine umfassende Transparenz der Lieferkette möglich ist. Kollaborative Soft- und Hardware in den Unternehmens-Workflows verhelfen zu einem effizienten D2C-Vertrieb (Direct-to-Consumer) sowie einer ressourcenschonenden On-Demand-Produktion.

Lokale On-Demand-Produktion ist heute angesagter denn je. Unternehmen der Modeindustrie vermeiden dank der so gewonnenen hohen Flexibilität bei der Herstellung von Textilien und Bekleidung teure Überproduktion und die Verschwendung von Ressourcen. Darüber hinaus erfüllen sie auf diese Weise die steigenden Anforderungen der Kunden nach einer nachhaltigen Herstellung. Gefordert werden dabei neben durchgehend transparenten Arbeitsprozessen auch ressourcenschonende Lieferketten. Epson wird auf der TexProcess 2022 mit Unterstützung von Partnerfirmen einen DTG-/DTF-Workflow und einen Sublimations-Workflow für eine nachhaltige, umweltschonende Produktion moderner, stylischer Textilien präsentieren.

Die Unternehmen DMIx by ColorDigital GmbH, Epson und Multi-Plot sind „Best Practice“-Partner im Bereich der digitalen Produktentwicklung bis hin zu kundenindividuellen Produktionstechniken, durch die eine Reduzierung der CO2-Emissionen sowie eine umfassende Transparenz der Lieferkette möglich ist. Kollaborative Soft- und Hardware in den Unternehmens-Workflows verhelfen zu einem effizienten D2C-Vertrieb (Direct-to-Consumer) sowie einer ressourcenschonenden On-Demand-Produktion.

More information:
Epson Texprocess Messe Frankfurt
Source:

Epson Deutschland GmbH

14.06.2022

Members of TMAS at Texprocess, Techtextil and Heimtextil in Frankfurt

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

ACG Nyström, a member of TMAS, the Swedish textile machinery association, will demonstrate the automated Talon 75 multi-ply cutter at the forthcoming Texprocess exhibition in Frankfurt, Germany, from June 21-24.

The Talon 75 is capable of cutting up to 7.5cm of compressed materials common to the sewn products and technical textiles industries. The machine is engineered to automatically pull stacked material plies from the spreading table to a modular, bristle-block conveyor bed for reciprocating knife cutting of patterns. Precise system operations with state-of-the-art motion control communications offer an industrial-strength solution.

Industry 4.0 ready
Eastman’s Talon multi-ply cutting systems are Industry 4.0 ready and equipped with the latest in condition based predictive maintenance technology. Their robust design utilises motors and amplifiers that automatically detect changes in critical components to notify operators well in advance of maintenance prompts. Also on display in Frankfurt will be Eastman’s ES-960, a material spreader capable of fast and easy spreading heights up to 20cm.

Members of TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing at the forthcoming Texprocess, Techtextil and Heimtextil shows which are all taking place in Frankfurt from June 21-24.

Source:

TMAS / AWOL Media

Advances in automation from Svegea at Texprocess 2022 (c) Svegea
With Svegea bias cutters, circular woven technical fabrics are fed via a revolving winder and slit at angles.
18.05.2022

Advances in automation from Svegea at Texprocess 2022

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy show in Frankfurt and a busy year,” says Svegea Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations wherever they are, and at the moment we’re seeing a lot of interest in the reshoring of operations by our customers, to bring final-stage manufacturing closer to the key European and US markets.”

E-Drive 2
The EC 300 collarette cutter on show in Frankfurt is equipped with the latest E-Drive 2 system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process.

The integrated, fully automatic FA500 roll slitter accommodates diameters up to 400mm and is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Niche applications
Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

The ability to produce tubular fabric which is cut on the bias allows customers to provide textiles which not only have improved drape and elasticity properties for complex and intricate shapes, but also offer ways to reduce production costs by eliminating unnecessary wastage from the manufacturing process. Pre-cutting the fabric to a specific bias reduces extra handling of the fabric in further processes, saving customers both valuable production time and costs.

Source:

AWOL Media on behalf of TMAS

(c) Eton
22.04.2022

More localised and automated textile manufacturing with TMAS technologies

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

At the forthcoming Texprocess, Techtextil and Heimtextil shows taking place in Frankfurt from June 21-24 – members of the Swedish Textile Machinery Association TMAS will be showcasing a range of solutions aligning with the growing trend for more localised and automated textile manufacturing.

Digitalisation and the push for more sustainable, shorter and less expensive supply chains are currently making manufacturing in high-cost countries within Europe more attractive and there have been many other contributing factors to this over the past two years.

The Covid-19 pandemic exposed the vulnerability of many countries to shortages of essential items like PPE while at the same time making the full exploitation of new digital options essential during national lock-downs and long periods of restricted travel. The escalating cost of global transportation, as well as the growth of online retailing and the associated benefits of on-demand digital manufacturing, are further reinforcing the many benefits of short-run and near-shore new operations.

Secure supply
At Texprocess, for example, Eton Systems will be unveiling its latest Ingenious software solution which further enhances the company’s Opta Unit Production System (UPS) introduced in 2021.

“Our automated technology has already had a great impact on the productivity of thousands of garment production lines,” says Eton’s Managing Director Jerker Krabbe. “Our systems help producers across the world to reduce repetitive manual tasks and increase efficiency, which evens out some of the differences between production in high and low-cost countries, making reshoring a feasible option. Creating a diversified production portfolio with a mix of production facilities, some closer to home, makes for a more secure product supply.”

Flexibility
Imogo meanwhile recently installed the first industrial scale dyeing system in Sweden for many years. The Dye-Max spray dyeing line has the potential to slash the use of fresh water, wastewater, energy and chemicals by as much as 90% compared to conventional jet dyeing systems. It is capable of carrying out the application of a wide range of fabric pre-treatments and finishing processes, providing users with unbeatable flexibility in production.

“Here in Scandinavia, we are currently seeing an explosion of companies developing sustainable new cellulosic fibres – many from waste clothing – but a problem is that all of the environmental benefits they deliver can potentially be lost in the further processing, and especially in conventional dyeing,” observes the company’s Founding Partner Per Stenflo. “The Dye-Max system positively addresses this, but interest in it has not just been confined to Europe. We are currently seeing a lot of activity in Turkey – largely as a near-shore partner to European brands – but also in Bangladesh.”

Robotics at Heimtextil
ACG Kinna Automatic specialises in automation solutions for filled products such as quilts, pillows and mattresses and its live demonstrations of robotics in action have proved a magnet for visitors to Heimtextil. This year’s show will be no exception.

“The use of robotics is now standard across many industries dealing in solid goods, but the handling of soft materials such as textiles is a little more complex,” says Managing Director Christian Moore. “Nevertheless, it’s something we have successfully mastered, and our robotic systems are proving highly beneficial to their users. There is no ‘one-size-fits-all’ solution when it comes to automation and our approach is always to carefully examine where it will make the difference in each bespoke system. A focus is on identifying and eliminating bottlenecks which will increase product flows.”

During the Covid-19 pandemic, ACG Kinna drew on all of its automation know-how and extensive network of contacts to build a new nonwovens fabric converting and single-use garment making-up plant in a matter of weeks, in order to supply the Swedish authorities with urgently-needed medical gowns.

Instant colour
Localised textile production is also booming in the USA, where Coloreel has recently secured multiple orders for its instant thread colouration technology via its US partner Hirsch.

“Coloreel technology enables the high-quality and instant colouring of a textile thread while it is actually being used in production and can be paired with any existing embroidery machine without modification, while also making it possible to produce gradients in an embroidery for the first time,” explains VP of Sales Sven Öquist.

“Advanced rapid colour formulation software and high-speed drive technology allow a single needle to carry out what it previously required many multiples of them to do – and with much more consistent stitch quality. By instantly colouring a recycled white base thread during production, our system enables complete freedom to create unique embroideries without any limitations. Colour changes along the thread can either be made rapidly from one solid colour to another, or gradually, to make smooth transitions or any colouring effect desired. This provides big benefits when it comes to sustainability and design creativity.”

Milestone
Svegea will be promoting its latest EC 300 collarette cutting machine at Texprocess 2022. This machine is used by garment manufacturers around the world for the production of tubular apparel components such as waistbands, cuff and neck tapes and other seam reinforcements. With its E-Drive 2 system and fully automatic FA500 roll slitter, the EC 300 has an output of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy year,” says Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations, wherever they are.”

Sensors
The advanced yarn tension monitoring technologies of Eltex of Sweden meanwhile play an essential role in rectifying defects in  weaving, tufting and composite reinforcement operations.

“A correct tension of the warp and weft threads ensures proper machine operation,” explains Eltex Global Marketing and Sales Manager Anoop K. Sharma “The constant tension monitoring and automatic control of the tension of the thread help to overcome unnecessary problems.

“We continue to make advances in both the hardware and software of our tension monitoring systems, such as the EyE™ for the warping process. With the EyE™, the yarn tension values from all yarns are continuously updated and displayed on screen. In addition, tension values outside the warning level are indicated both on the sensor’s LEDs and on the screen for complete quality control. No fabric can be woven without the appropriate and correct tension.”

Source:

AWOL Media

(c) Zünd Systemtechnik AG
22.04.2022

Zünd@Texprocess 2022 – #LetsTalkWorkflow

Zünd präsentiert auf der Texprocess in Frankfurt Softwaretools für jeden Teilprozess des Textilzuschnitts im Zusammenspiel mit leistungsstarken, auf Effizienz ausgerichteten digitalen Schneidsystemen.

Ein digitalisierter und automatisierter Produktionsworkflow ist entscheidend für die wirtschaftliche und standardisierte Textil- und Bekleidungsfertigung. Dies unterstützt Zünd durch vielseitige Automatisierungslösungen, die der Schweizer Gesamtlösungsanbieter für den Textilzuschnitt auf seinem Messestand in Frankfurt vorstellen wird. Sie helfen, die Aufbereitung von Druck- und Schneiddaten zu automatisieren und zu standardisieren, unterstützen bei der Produktionsüberwachung und -analyse, steuern den Zuschnitt und vereinfachen die Entnahme von Schnittteilen und die Logistik.

Zünd präsentiert auf der Texprocess in Frankfurt Softwaretools für jeden Teilprozess des Textilzuschnitts im Zusammenspiel mit leistungsstarken, auf Effizienz ausgerichteten digitalen Schneidsystemen.

Ein digitalisierter und automatisierter Produktionsworkflow ist entscheidend für die wirtschaftliche und standardisierte Textil- und Bekleidungsfertigung. Dies unterstützt Zünd durch vielseitige Automatisierungslösungen, die der Schweizer Gesamtlösungsanbieter für den Textilzuschnitt auf seinem Messestand in Frankfurt vorstellen wird. Sie helfen, die Aufbereitung von Druck- und Schneiddaten zu automatisieren und zu standardisieren, unterstützen bei der Produktionsüberwachung und -analyse, steuern den Zuschnitt und vereinfachen die Entnahme von Schnittteilen und die Logistik.

Die modular aufgebaute Software MindCut Studio enthält alle essenziellen Funktionen für jede Prozessphase der Textil- und Bekleidungsfertigung. Die Software erkennt zuverlässig die Stoffmusterung und Materialverzug, kompensiert diesen und verschachtelt die Schnittteile platz- und materialsparend auf dem Textil. Angesichts steigender Materialkosten ist die maximale Materialausnutzung von zentraler Bedeutung. Die Software bietet flexibel die passsende Variante für den Musterabgleich, unabhängig davon, ob das Textil gestreift, kariert oder digital bedruckt ist.

Für eine effiziente Teileentnahme müssen fertig geschnittene Teile schnell und eindeutig identifizierbar sein. Projizierte Farbcodes und Teileinformationen unterstützen den Bediener beim Absortieren. Und schliesslich wird auch die Teileentnahme mittels Projektion und Monitoranzeige visuell unterstützt.  

Zünd Cutter sind fixer Bestandteil in integrierten Produktionsprozessen. Damit können Bekleidungs- und Möbelhersteller Prozesse automatisieren und gleichzeitig den Datenfluss optimieren. Das Resultat sind deutlich höhere Durchsätze, niedrigere Fehlerquoten und Arbeitskosten, was zu einer deutlich gesteigerten Wettbewerbsfähigkeit beiträgt. Dem Messepublikum stellt Zünd seinen D3 Cutter mit zwei Produktionsbalken vor. Die Balken können jeweils mit bis zu drei verschiedenen Modulen ausgerüstet werden, wodurch sich der Materialdurchsatz massiv erhöht. Die intelligente Cutter-Steuerung verteilt die Aufträge optimal und sorgt so für maximale Produktivität.

Source:

Zünd Systemtechnik AG

Techtextil and Texprocess 2022: registration now open (c) Messe Frankfurt
08.06.2021

Techtextil and Texprocess 2022: registration now open

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022.

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Source:

Messe Frankfurt

(c) PFAFF Industriesysteme und Maschinen GmbH
21.05.2019

Dürkopp Adler: The new M-TYPE DELTA

From the machine to the assistant
"With our groundbreaking new M-TYPE DELTA sewing system, we redefine industrial sewing and enable solutions that were previously unthinkable," says Dietrich Eickhoff, CEO of the Dürkopp Adler Group, at the world premiere at the Texprocess 2019 in Frankfurt: "The sewing machine becomes an assistant, partner, helper and communicator. This is a significant difference to all previous machine concepts and offers an incredible number of new possibilities! "

The new M-TYPE DELTA sewing system is a fully digitized industrial sewing machine for materials such as leather, upholstery and technical textiles. Thomas Brinkhoff, Director of Marketing Dürkopp Adler Group, explains: "We produce the perfect seam with this machine, whatever the situation, without the need for conversion." This is ensured by the new smart sewing kinematics, which immediately achieve the best sewing results without having to mechanically change the machine.

From the machine to the assistant
"With our groundbreaking new M-TYPE DELTA sewing system, we redefine industrial sewing and enable solutions that were previously unthinkable," says Dietrich Eickhoff, CEO of the Dürkopp Adler Group, at the world premiere at the Texprocess 2019 in Frankfurt: "The sewing machine becomes an assistant, partner, helper and communicator. This is a significant difference to all previous machine concepts and offers an incredible number of new possibilities! "

The new M-TYPE DELTA sewing system is a fully digitized industrial sewing machine for materials such as leather, upholstery and technical textiles. Thomas Brinkhoff, Director of Marketing Dürkopp Adler Group, explains: "We produce the perfect seam with this machine, whatever the situation, without the need for conversion." This is ensured by the new smart sewing kinematics, which immediately achieve the best sewing results without having to mechanically change the machine.

The training of the operator is reduced to the absolute minimum, because the machine shows the user with video support what to do and how to do it right. With sophisticated sensor technology, the M-TYPE DELTA ensures that virtually no loss of valuable materials occurs through bad stitches or missing threads.

An integrated usage- or time-controlled maintenance assistant indicates upcoming work. Service work can be documented in the machine and retrieved at any time. This reduces machine downtime to an absolute minimum.

"Anyone who wants to sew individualized products industrially can gain the decisive competitive advantage with this sewing system," emphasizes Dietrich Eickhoff, "because the M-TYPE DELTA is perfectly prepared for use in the necessary machine networks such as our QONDAC system."

(c) Lectra
16.05.2019

Lectra wins Texprocess Innovation Award 2019

Lectra has been awarded by a jury of experts the Texprocess Innovation Award 2019 in the New Process category for its latest ground-breaking offer, Fashion On Demand by Lectra.

Fashion On Demand by Lectra automates the entire personalization process, from order reception and product development to the final cutting stages. Resulting from a four-year research-and-development process, the digital solution for on-demand production was developed based on Industry 4.0 principles.

"We are very proud to receive this prestigious award at Texprocess, the biggest international event for all fashion players. Fashion On Demand by Lectra allows companies to produce personalized clothing at the same speed as ready-to-wear and avoid overstocking by producing in precise quantities,” states Holger Max-Lang, President, Northern & Eastern Europe, Middle East, Lectra.

Lectra has been awarded by a jury of experts the Texprocess Innovation Award 2019 in the New Process category for its latest ground-breaking offer, Fashion On Demand by Lectra.

Fashion On Demand by Lectra automates the entire personalization process, from order reception and product development to the final cutting stages. Resulting from a four-year research-and-development process, the digital solution for on-demand production was developed based on Industry 4.0 principles.

"We are very proud to receive this prestigious award at Texprocess, the biggest international event for all fashion players. Fashion On Demand by Lectra allows companies to produce personalized clothing at the same speed as ready-to-wear and avoid overstocking by producing in precise quantities,” states Holger Max-Lang, President, Northern & Eastern Europe, Middle East, Lectra.

Fashion On Demand by Lectra is available in the form of two packages, one dedicated to made to measure, with pattern adjustments, and the other to customization, with product characteristic alterations. This turnkey solution automates on-demand production right from order reception to production development stages and the cutting room. Companies can define their desired product personalization criteria for each item depending on the package, and launch production processes right from the get-go, without interfering with their standard workflows.

"This innovative cloud-based platform solution ensures efficient made-to-measure and customization production processes and facilitates nearshoring for companies that offer individualized products. This technology is up and running and can be used by the fashion industry on a plug-and-play basis," say the jury experts. “Since 2011, the Texprocess Innovation Award has been honoring remarkable achievements and new developments in the Texprocess product range under two categories: new technology and new process. The winners are selected based on criteria such as degree of innovation, choice of materials and environmental sustainability."

(c) EPSON
06.05.2019

Epson präsentiert auf der Texprocess zusammen mit Partnerunternehmen Lösungen für einen effizienten textilen Produktionsworkflow.

Epson präsentiert auf der diesjährigen Texprocess (Messe Frankfurt, 14. bis 17. Mai 2019) mehrere Exponate. So wird in Kooperation mit der „Digital Textile Connection“, einem Zusammenschluss  nterschiedlicher Firmen, ein textiler Workflow mit Weitergabe von Farbinformation gezeigt. Auf dem Stand von Assyst werden dazu Textilmuster gescannt und mithilfe der DMIx Cloud sowie den jeweiligen Lösungen der Unternehmen der „Digital Textile Connection“ in Hinblick auf eine farbrichtige Verarbeitung entlang der Produktionslinie weitergeleitet. Auf dem Stand von Epson schließlich werden Muster farbverbindlich mit einem SureColor SC-P5000 Drucker ausgegeben.

Epson präsentiert auf der diesjährigen Texprocess (Messe Frankfurt, 14. bis 17. Mai 2019) mehrere Exponate. So wird in Kooperation mit der „Digital Textile Connection“, einem Zusammenschluss  nterschiedlicher Firmen, ein textiler Workflow mit Weitergabe von Farbinformation gezeigt. Auf dem Stand von Assyst werden dazu Textilmuster gescannt und mithilfe der DMIx Cloud sowie den jeweiligen Lösungen der Unternehmen der „Digital Textile Connection“ in Hinblick auf eine farbrichtige Verarbeitung entlang der Produktionslinie weitergeleitet. Auf dem Stand von Epson schließlich werden Muster farbverbindlich mit einem SureColor SC-P5000 Drucker ausgegeben.

Des Weiteren werden die Ergebnisse des Projektes „Neue Produktionsmodelle – Vom digitalen Druck bis zur Konfektion“ von Studierenden der Fachhochschule Niederrhein gezeigt, das Epson im letzten Jahr erstmals als externer Auftraggeber vergeben hat. Das dieses Projekt bearbeitende Team ging bei insgesamt 26 teilnehmenden Projekten als Gewinner hervor. Eine der Studentinnen dieser Gruppe, Anna Charlott Buttkus, wird auf dem Epson Messestand mithilfe einer Ultraschallschweißmaschine der Firma Nucleus GmbH ein Kleid des Projektes nähen. Das Muster wird dabei auf einem Epson Sublimationsdrucker SureColor SCF9300 gedruckt und live auf dem Stand sublimiert. Auf diese Weise zeigt Epson einen kompletten digitalen Workflow für Kunden im Fashionbereich.

Shirt-Finisher_SF26 (c) VEIT GmbH
23.04.2019

VEIT Group is presenting highlights at Texprocess 2019

At the Texprocess trade fair in Frankfurt/Main, Germany (May 14th to 17th 2019) VEIT Group will present on more than 400 m² the latest highlights in the areas of ironing, finishing, pressing and fusing in the garment industry as well as automotive and interior sectors.

"Pressing for Excellence" is the corporate slogan of the VEIT Group. In addition, this year's motto at Texprocess is "LOVEIT" which is a wordplay on "love it" or “love VEIT”. In the words of VEIT Group President Günter Veit: “Our motto stands for the passion that we have for the engineering of our products, our love of perfection and our devotion to our customers. This is the basis of their trust in our products. We want to offer our customers value not only now, but also for the future which we believe will be more digital and more sustainable. Both Industry 4.0 readiness, as well as the good of operator and environment are essential components of our product development efforts.”

At the Texprocess trade fair in Frankfurt/Main, Germany (May 14th to 17th 2019) VEIT Group will present on more than 400 m² the latest highlights in the areas of ironing, finishing, pressing and fusing in the garment industry as well as automotive and interior sectors.

"Pressing for Excellence" is the corporate slogan of the VEIT Group. In addition, this year's motto at Texprocess is "LOVEIT" which is a wordplay on "love it" or “love VEIT”. In the words of VEIT Group President Günter Veit: “Our motto stands for the passion that we have for the engineering of our products, our love of perfection and our devotion to our customers. This is the basis of their trust in our products. We want to offer our customers value not only now, but also for the future which we believe will be more digital and more sustainable. Both Industry 4.0 readiness, as well as the good of operator and environment are essential components of our product development efforts.”

Among the large portfolio of high-performance technology presented at the trade show, there is a significantly improved shirt finisher SF 26. With the new model SF 26, VEIT manages to further increase both the functionality and the ergonomics of the shirt finisher. For the customer, this optimisation in application technology is reflected in higher quality of the finished product and simplified operation.

Combined with the improved FS shirt folding table series – a highly successful product – VEIT offers true streamlining potential while maintaining high quality levels when folding shirts, blouses and polos in 3 versions.

Reacting to the customers’ demands, VEIT has equipped their popular BX fusing machines – BXT, the universal solution for shirts and outerwear – with a separate feeding belt and a 7” colour operating panel. These changes make the BX fully industry 4.0 ready and helps to further improve the ergonomics and energy efficiency.

In order to increase flexibility in the shaping of textiles, VEIT will present a new solution for high-quality finishing of the elbow seam in the area of BRISAY machines – the BRI 860 VC sleeve seam finish pressing machine. The 8430 universal multiform finisher was enhanced to cover an even wider range of applications. It can now also be used for finishing, among other items, also polos, T-shirts, blouses, blousons and jackets.

In addition to the innovative machine highlights, VEIT has also developed special solutions for customers' investment decisions. "More and more companies that are making investments are not only looking at the purchase price, but rather at the total lifetime cost of ownership," explains Vice President Christopher Veit. VEIT is presenting two interesting offers to meet this trend:
Customers may choose to buy a machine according to the “Pay Per Piece” system, which means that they pay for how much the machine is used, instead of a full up-front investment. This reduces the investment risk and allows more flexible reactions to especially to scalable business opportunities. Alternatively, when purchasing a machine the traditional way, customers can limit operating costs, extend the machine’s lifespan and achieve improved machine availability by signing a service contract. With its global service and partnership network, VEIT Group can offer this service worldwide.

More information:
VEIT
Source:

VEIT GmbH

(c) Messe Frankfurt India
25.02.2019

Messe Frankfurt India and MEX Exhibitions enter into a strategic alliance

With portfolio expansion and future development of the industry in sight, the organisers of Texprocess India and Gartex India have entered into a strategic alliance to form a unified industry platform ‘Gartex Texprocess India’. The event will be part of Messe Frankfurt’s Texpertise Network leveraging on the group’s strong global network and expertise in the sector.
 
Leading in both apparel consumption and exports, India holds the second largest textile manufacturing capacity globally with the textile machinery sector witnessing a growth of 8-10 percent year on year. As the world's second largest exporter of textiles and clothing projected to reach USD 300 billion by 2024, Indian apparel manufacturers are moving towards increasing their manufacturing capacities and upgrading technology, giving rise to automation garmenting processes to enter the Indian market. Having made its debut in 2016, both Texprocess India and Gartex India received tremendous response from the industry with leading associations and companies in the garment and textile machinery sector coming forward to support the shows.
 

With portfolio expansion and future development of the industry in sight, the organisers of Texprocess India and Gartex India have entered into a strategic alliance to form a unified industry platform ‘Gartex Texprocess India’. The event will be part of Messe Frankfurt’s Texpertise Network leveraging on the group’s strong global network and expertise in the sector.
 
Leading in both apparel consumption and exports, India holds the second largest textile manufacturing capacity globally with the textile machinery sector witnessing a growth of 8-10 percent year on year. As the world's second largest exporter of textiles and clothing projected to reach USD 300 billion by 2024, Indian apparel manufacturers are moving towards increasing their manufacturing capacities and upgrading technology, giving rise to automation garmenting processes to enter the Indian market. Having made its debut in 2016, both Texprocess India and Gartex India received tremendous response from the industry with leading associations and companies in the garment and textile machinery sector coming forward to support the shows.
 
At the internationally renowned Texprocess, exhibitors from around the world converge to present the latest machines, plants, processes and services for the manufacture of garments and textile and flexible materials. While Texprocess India was launched as a pavilion to create an innovation platform for garment-manufacturing and textile processing at Techtextil India tradeshow in Mumbai, Gartex India exhibition was held annually in New Delhi and has grown wider in scope covering not just garment and textile manufacturing value chain but has also added segments like innerwear manufacturing zone, Laundry & Denim show along the way in addition to digital textile printing, embroidery and other existing verticals. With the merger of the two strong textile trade fair brands, the organisers, Messe Frankfurt Trade Fairs India Pvt Ltd and MEX Exhibitions, aspire to work in collaboration for India’s textile industry development, facilitating global sourcing and networking in the textile value chains.

More information:
Messe Frankfurt
Source:

Messe Frankfurt

The cushion helps the user to operate different applications by means of sensor surfaces, light and wireless communication, for example an alarm function by light. (c) ITA
The cushion helps the user to operate different applications by means of sensor surfaces, light and wireless communication, for example an alarm function by light.
22.02.2019

Smart Textiles Micro Factory brings Smart Textiles into series production at Texprocess 2019

The study "Technologies, Markets and Players" by E-Textiles 2018-2028 predicts a 2 billion dollar growth of the smart textile market. This growth can only be achieved by replacing the existing approaches, mostly manual production, with series production. With the Smart Textiles Micro Factory, the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be demonstrating for the first time on the Texprocess stand, stand number C02, in the transition from Halls 4.1 and 5.1 how a smart textile can be manufactured from design to finished product together with various partners by producing a smart cushion.

The product and the manufacturing process are the result of co-innovation. In the future, co-innovation for smart textiles is to be implemented via the GeniusTex platform. As part of the German Federal Ministry of Economic Affairs and Energy's major strategic project for the “Smart Service World”, ITA is working with partners from industry and research to develop the online platform for smart textile innovation.

The study "Technologies, Markets and Players" by E-Textiles 2018-2028 predicts a 2 billion dollar growth of the smart textile market. This growth can only be achieved by replacing the existing approaches, mostly manual production, with series production. With the Smart Textiles Micro Factory, the Institut für Textiltechnik of RWTH Aachen University, short ITA, will be demonstrating for the first time on the Texprocess stand, stand number C02, in the transition from Halls 4.1 and 5.1 how a smart textile can be manufactured from design to finished product together with various partners by producing a smart cushion.

The product and the manufacturing process are the result of co-innovation. In the future, co-innovation for smart textiles is to be implemented via the GeniusTex platform. As part of the German Federal Ministry of Economic Affairs and Energy's major strategic project for the “Smart Service World”, ITA is working with partners from industry and research to develop the online platform for smart textile innovation.