From the Sector

Reset
116 results
11.03.2024

Zünd auf Texprocess 2024

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Zünd präsentiert technologische Highlights für einen automatisierten und rationellen integrierten Textilzuschnitt auf der Texprocess 2024 in Frankfurt (23. bis 26. April).

Zu den Lösungen für den Textilzuschnitt gehört die Produktionssoftware MindCUT Studio Production, die in ihrer neusten Version mit neuen Funktionen überzeugt. Außerdem zeigt das Unternehmen sein neues Roll Handling System – RHS für den autonomen und unterbrechungsfreien Zuschnitt und präsentiert sein Schneidsystem Zünd G3 Cutter, das in der Grössenausführung L-2500 zu sehen sein.

Funktionen in MindCUT Studio
Auf der Texprocess stellt Zünd die sogenannte Feature Recognition vor. Mit dieser neuen Funktion erkennt die Software Motive sowie die verschiedenen Teile eines Kleidungsstücks mithilfe künstlicher Intelligenz und platziert diese für den Zuschnitt hochpräzise auf der Stoffbahn. Der Prozess ist schnell erledigt: Modell auswählen, Motiveigenschaften platzieren und die einzelnen Schnittteile zuweisen. Die Software erkennt deren Positionen und repetiert sie entlang der Stoffbahn. Unmittelbar danach kann der Zuschnitt gestartet werden. Die Motiverkennung mithilfe von KI automatisiert einen bislang manuellen Prozess und erlaubt eine hohe Wiederholgenauigkeit.
Neben der Motiverkennung bietet MindCUT auch eine Printed-Cut-Funktion, die Aufdrucke automatisiert erfasst oder Pattern Matching, das rapportierende Muster erkennt, Materialverzug kompensiert und die Marker automatisch mit der Textilmusterung abgleicht.

Roll Handling System – RHS
Das Rollenmagazin bietet Platz für bis zu zehn Textilrollen und kann auftragsabhängig mit unterschiedlichen oder materialidentischen Textiltypen ausgestattet werden. Mit dem grossen, vollautomatischen Rollenmagazin kann die unterbrechungsfreie Zuschnittzeit erhöht werden. Das Roll Handling System – RHS beschickt den Zünd Cutter komplett autonom mit Material. Das ermöglicht lange Produktionsfenster, in denen keine Bedieneingriffe mehr notwendig sind. Lediglich die Bestückung des Rollenmagazins erfolgt noch manuell. Dabei erfasst die Bedienerin die einzelnen Rollen mittels Barcode-Scan. Materialzuweisung und Steuerung des RHS erfolgen dann direkt über die MindCUT-Software.

Source:

Zünd Systemtechnik AG

Winder manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy Photo: ITA – Institut für Textiltechnik of RWTH Aachen University
Winder manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy
06.03.2024

ITA: Unique Winder for Elastic Filament Yarn Development

Since March 1st 2024, the technical centre of Institut für Textiltechnik of RWTH Aachen University (ITA) has been equipped with an additional winder.

This globally unique winder has been manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy, and enables the development of elastic yarns for numerous and innovative areas of application. Monofilament and multifilament yarns can be spun within a speed range of 100 to 3,200 m/min on bobbins with an industrial standard size of 73.6 mm x 83.8 mm x 115.5 mm.

The use of these bobbins enables immediate further processing along the textile process chain, for example in production of elastic combination yarns or knitting. Due to the high flexibility of this winder in combination with the available spinning plants at ITA, testing is possible with material amounts starting from a few hundred grams up to hundreds of kilograms.

Since March 1st 2024, the technical centre of Institut für Textiltechnik of RWTH Aachen University (ITA) has been equipped with an additional winder.

This globally unique winder has been manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy, and enables the development of elastic yarns for numerous and innovative areas of application. Monofilament and multifilament yarns can be spun within a speed range of 100 to 3,200 m/min on bobbins with an industrial standard size of 73.6 mm x 83.8 mm x 115.5 mm.

The use of these bobbins enables immediate further processing along the textile process chain, for example in production of elastic combination yarns or knitting. Due to the high flexibility of this winder in combination with the available spinning plants at ITA, testing is possible with material amounts starting from a few hundred grams up to hundreds of kilograms.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

Das Mehrweg-Glossar ist zweisprachig (Deutsch und Englisch) und kostenlos erhältlich. © Adobe Stock PX Media/Composing Fraunhofer IML
Das Mehrweg-Glossar ist zweisprachig (Deutsch und Englisch) und kostenlos erhältlich.
14.02.2024

Klarheit im Begriffs-Dschungel der Circular Economy

Wie unterscheiden sich Wiederverwendung und Recycling? Wie ist der deutsche Begriff Mehrweg zu verwenden, wie grenzt er sich von Einweg ab? Für welche Bewertung sind Wiedereinsatzquoten sinnvoller als Recyclingquoten? Antworten auf diese nicht zuletzt durch die PPWR (Packaging & Packaging Waste Regulation der EU) aufgeworfenen Fragen und kurze Erläuterungen zu Begrifflichkeiten der Kreislaufführung von Verpackungen liefert das neue auf Deutsch und Englisch erschienene »Mehrweg-Glossar/Glossary on Reuse«. Das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT und das Fraunhofer-Institut für Materialfluss und Logistik IML erstellten dies im Auftrag der Stiftung Initiative Mehrweg, um Klarheit in die oft nicht trennscharfen Begrifflichkeiten rund um Wiederverwendung und die Circular Economy zu bringen.

Wie unterscheiden sich Wiederverwendung und Recycling? Wie ist der deutsche Begriff Mehrweg zu verwenden, wie grenzt er sich von Einweg ab? Für welche Bewertung sind Wiedereinsatzquoten sinnvoller als Recyclingquoten? Antworten auf diese nicht zuletzt durch die PPWR (Packaging & Packaging Waste Regulation der EU) aufgeworfenen Fragen und kurze Erläuterungen zu Begrifflichkeiten der Kreislaufführung von Verpackungen liefert das neue auf Deutsch und Englisch erschienene »Mehrweg-Glossar/Glossary on Reuse«. Das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT und das Fraunhofer-Institut für Materialfluss und Logistik IML erstellten dies im Auftrag der Stiftung Initiative Mehrweg, um Klarheit in die oft nicht trennscharfen Begrifflichkeiten rund um Wiederverwendung und die Circular Economy zu bringen.

Das rund 40 Seiten umfassende, zweisprachige Glossar hat das Ziel, Beschreibungen und Vergleiche im Bereich der wiederverwendbaren und rezyklierbaren Verpackungssysteme zu schärfen. Das Werk soll als Arbeitshilfe dienen, um die Kommunikation zwischen Wissenschaft, Politik, Unternehmen und Verbraucher*innen zu erleichtern. Begrifflichkeiten wie Recycling, Reutilization, Einweg, Mehrweg oder Recyclingquoten sind omnipräsent, jedoch nicht immer trennscharf definiert. Beispielsweise werden Wiederverwendung und Recycling manchmal als konkurrierende Verfahren angesehen, manchmal fungiert Recycling als Oberbegriff, manchmal Wiederverwendung. »In diesem Glossar betrachten wir die Wiederverwendung als zerstörungsfreie Kreislaufführung, d.h. das Objekt und seine Form bleiben erhalten, während das Recycling einen zerstörenden Aufbereitungsprozess beschreibt, bei dem es vor allem um den Stofferhalt geht«, gibt Jürgen Bertling von Fraunhofer UMSICHT und Mitautor des Glossars einen Einblick.

Das Glossar ist in vier Kapitel unterteilt: Zunächst erläutert das Autorenteam relevante Aspekte für den Vergleich von Verpackungssystemen, das nächste Kapitel enthält Übersichtsgrafiken zu Verpackungstypen in Abhängigkeit ihrer Kreislauffähigkeit und eine schematische Darstellung verbundener Kreisläufe. Die Definitionen aller relevanten Begrifflichkeiten wie z. B. Wiederverwendung und Weiterverwendung sowie eine Abgrenzung und Einordnung der im Deutschen verwendeten Begrifflichkeiten Einweg und Mehrweg finden sich im dritten Kapitel. Das Glossar schließt mit einem Kapitel zu Formeln und Formelzeichen für Berechnungen, die zu einer möglichst allgemeinverständlichen Schreibweise in wissenschaftlich-technischen Analysen beitragen sollen.

Das Glossar ist frei zugänglich und kann unter diesem Link heruntergeladen werden.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT
Fraunhofer-Institut für Materialfluss und Logistik IML

NRW.Energy4Climate veröffentlicht Diskussionspapier. © Warchi-iStock.com
NRW.Energy4Climate veröffentlicht Diskussionspapier.
13.02.2024

Klimaneutrale Industrie braucht schnelle Genehmigungsverfahren

Für die Transformation der Industrie hin zur Klimaneutralität sind zügige Genehmigungsverfahren eine zentrale Rahmenbedingung. Denn sie bestimmen darüber, ob notwendige Maßnahmen schnell umgesetzt werden können. Mit dem nun veröffentlichten Diskussionspapier legt die unter dem Dach der Landesgesellschaft NRW.Energy4Climate arbeitende Initiative IN4climate.NRW konkrete Vorschläge zur Weiterentwicklung des Rechtsrahmens vor.

EnWG, UVPG, BImSchG, BauGB: Diese Kürzel stehen für Bundesgesetze, die erheblichen Einfluss auf die Dauer von Genehmigungsverfahren nehmen können. Um die Industrie beim klimaneutralen Umbau bestmöglich zu unterstützen, ist es notwendig, diesen bestehenden Rechtsrahmen weiterzuentwickeln. Hier setzt das Diskussionspapier »Vorschläge zur Beschleunigung von Genehmigungsverfahren für die Transformation der Industrie zur Klimaverträglichkeit« an. In fünf Themenfeldern formuliert das Papier Vorschläge zur Änderung des Bundesrechts. Ausgangspunkt sind dabei Praxiserfahrungen der energieintensiven Grundstoffindustrie und der zugehörigen Infrastruktursektoren.

Für die Transformation der Industrie hin zur Klimaneutralität sind zügige Genehmigungsverfahren eine zentrale Rahmenbedingung. Denn sie bestimmen darüber, ob notwendige Maßnahmen schnell umgesetzt werden können. Mit dem nun veröffentlichten Diskussionspapier legt die unter dem Dach der Landesgesellschaft NRW.Energy4Climate arbeitende Initiative IN4climate.NRW konkrete Vorschläge zur Weiterentwicklung des Rechtsrahmens vor.

EnWG, UVPG, BImSchG, BauGB: Diese Kürzel stehen für Bundesgesetze, die erheblichen Einfluss auf die Dauer von Genehmigungsverfahren nehmen können. Um die Industrie beim klimaneutralen Umbau bestmöglich zu unterstützen, ist es notwendig, diesen bestehenden Rechtsrahmen weiterzuentwickeln. Hier setzt das Diskussionspapier »Vorschläge zur Beschleunigung von Genehmigungsverfahren für die Transformation der Industrie zur Klimaverträglichkeit« an. In fünf Themenfeldern formuliert das Papier Vorschläge zur Änderung des Bundesrechts. Ausgangspunkt sind dabei Praxiserfahrungen der energieintensiven Grundstoffindustrie und der zugehörigen Infrastruktursektoren.

Samir Khayat, Geschäftsführer von NRW.Energy4Climate: »In unserer Initiative IN4climate.NRW bringen wir Wissenschaft, Politik und Wirtschaft an einen Tisch und erarbeiten Lösungsansätze, um den klimaneutralen Umbau der Industrie in der Praxis umzusetzen. Schnelle Genehmigungsverfahren sind hierbei von ganz zentraler Bedeutung. In dem Diskussionspapier machen wir konkrete Vorschläge, die echtes Beschleunigungspotenzial haben. Denn notwendige Umbaumaßen müssen, unter Wahrung der rechtlichen Vorgaben, zeitnah und zielgerichtet umgesetzt werden können.«

Den Diskussionsbeitrag hat IN4climate.NRW gemeinsam mit Partnerunternehmen in der Arbeitsgruppe »Genehmigungsverfahren« erarbeitet. Hierzu gehören Heidelberg Materials, thyssenkrupp Steel, Open Grid Europe und das Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT.

Bundeseinheitliche Beschleunigung von Fachverfahren
Prof. Dr.-Ing. Ulrich Seifert vom Fraunhofer UMSICHT und einer der Autoren: »Die grundsätzliche Passfähigkeit der Vorschläge in den bestehenden Rechtsrahmen und plausibel darstellbare Bezüge zu übergeordneten, rechtsverbindlichen Zielen des Klimaschutzes waren die Leitmerkmale, um aus den beigesteuerten Hinweisen und Empfehlungen der Industriepartner eine Auswahl treffen und ausformulieren zu können. Die Vorschläge konzentrieren sich auf mögliche Änderungen des Bundesrechts, da in erster Linie eine bundeseinheitliche Beschleunigung von Fachverfahren angestrebt werden sollte, die allen Betroffenen in der Praxis zugutekommt. Sie folgen dem erkannten Bedarf, Transformationsvorhaben in der Breite den Weg zu ebnen und dabei auch notwendige Infrastrukturen einzubeziehen.«

Einige der in dem Papier enthaltenen Vorschläge sind bereits Gegenstand laufender Prozesse zur Gesetzesnovellierung, zu welchen das Papier durch die Einbettung in Praxiserfahrungen einen ergänzenden Beitrag leisten möchte. Die Vorschläge sind in die Themenfelder Energiewirtschaftsgesetz (EnWG), Gesetz über die Umweltverträglichkeitsprüfung (UVPG), Bundes-Immissionsschutzgesetz (BImSchG), Baugesetzbuch (BauGB) und Übergreifendes untergliedert. Jedem Änderungsvorschlag wird eine kurze Beschreibung der rechtlichen Situation vorangestellt, die die Problematik mit dem Blick auf zügige Genehmigungsverfahren veranschaulicht. Dem einzelnen Änderungsvorschlag folgt die juristische Begründung.

Source:

Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT

 

(c) Zünd Systemtechnik AG
09.02.2024

Zünd auf der Fespa

Zünd ist vom 19. bis 22. März auf Europas führender Messe für den digitalen Grossformatdruck, der Fespa Global Print Expo in Amsterdam vertreten.

Zünd zeigt, wie leistungsstarke Schneidtechnologie in Verbindung mit intelligenter Software und diversen optionalen Lösungen für das automatisierte Materialhandling den digitalen Zuschnitt effizient und rentabel gestalten. Unabhängig von ihrer Unternehmensgröße verlängern Werbemittelhersteller mit den Schneidlösungen die Betriebszeiten und senken gleichzeitig die Betriebskosten. Damit kann die Gesamtwirtschaftlichkeit des Zuschnitts nachhaltig erhöht werden.

Das Produktsortiment ist sehr modular aufgebaut und erlaubt es, einen Cutter mit wachsenden Anforderungen einfach und schnell mit Werkzeugen und Materialhandlingoptionen nachzurüsten und auf individuelle Anforderungen massgeschneidert zu konfigurieren.

Zünd ist vom 19. bis 22. März auf Europas führender Messe für den digitalen Grossformatdruck, der Fespa Global Print Expo in Amsterdam vertreten.

Zünd zeigt, wie leistungsstarke Schneidtechnologie in Verbindung mit intelligenter Software und diversen optionalen Lösungen für das automatisierte Materialhandling den digitalen Zuschnitt effizient und rentabel gestalten. Unabhängig von ihrer Unternehmensgröße verlängern Werbemittelhersteller mit den Schneidlösungen die Betriebszeiten und senken gleichzeitig die Betriebskosten. Damit kann die Gesamtwirtschaftlichkeit des Zuschnitts nachhaltig erhöht werden.

Das Produktsortiment ist sehr modular aufgebaut und erlaubt es, einen Cutter mit wachsenden Anforderungen einfach und schnell mit Werkzeugen und Materialhandlingoptionen nachzurüsten und auf individuelle Anforderungen massgeschneidert zu konfigurieren.

More information:
Fespa Zünd Systemtechnik AG
Source:

Zünd Systemtechnik AG

Foto Zünd Systemtechnik AG
30.01.2024

Zünd: Niederlassung in Brasilien

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Anfang 2024 hat Zünd den langjährigen Vertriebspartner BG Soluções Tecnológicas mit Sitz in Porto Alegre übernommen.

Seit Anfang 2024 ist BG Soluções Tecnológicas eine hundertprozentige Tochtergesellschaft der Zünd Systemtechnik AG und firmiert neu unter dem Namen Zund Brasil. BG Soluções Tecnológicas wurde 1981 von Sergio und Paulo Guerra gegründet und war seit 1990 offizieller Vertriebs- und Servicepartner der Zünd Systemtechnik AG.

Zund Brasil verlegt seinen Firmensitz von Porto Alegre in das rund 1000 km nördlich gelegene São Paulo, mit über 12 Millionen Einwohnern die größte Stadt Brasiliens und der größte industrielle Ballungsraum Lateinamerikas. Ein eigener Showroom bietet Kunden und Interessenten die Gelegenheit, die vielfältigen Möglichkeiten digitaler Schneidtechnologie vor Ort zu erleben. Die 10 Mitarbeitenden sind Experten in Beratung, Schulung, Installation und Service. Als CEO von Zund Brasil fungiert Cristiano Guerra. Mit dem neuen Tochterunternehmen kann Zünd in Lateinamerika weiter expandieren und das grosse Marktpotenzial optimal ausschöpfen.

Source:

Zünd Systemtechnik AG

Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics) © Business Angels Deutschland e. V. (BAND)
Presentation of the certificate for 1st place in the business plan competition KEUR.NRW 2023 to the RWTH start-up SA-Dynamics; from left to right: Oliver Krischer (Minister for the Environment, Nature Conservation and Transport of the State of NRW), Sascha Schriever (SA-Dynamics); Maximilian Mohr (SA-Dynamics); Jens Hofer (SA-Dynamics); Christian Schwotzer (SA-Dynamics)
26.01.2024

Start-up: Bio-based aerogel fibres replace synthetic insulation materials

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

The Aachen-based start-up SA-Dynamics is developing sustainable, bio-based and biodegradable insulation materials made from aerogel fibres, thereby setting new standards in resource-saving construction. Dr Sascha Schriever (Institut für Textiltechnik ITA), Maximilian Mohr (ITA), Dr Jens Hofer (ITA Postdoc) and Dr Christian Schwotzer (Department for Industrial Furnaces and Heat Engineering IOB), who trained at RWTH Aachen University, were awarded first place in the KUER.NRW Business Plan Competition 2023 and prize money of €6,000.

SA-Dynamics relies on the impressive properties of aerogel fibres: they have excellent insulating properties, are lightweight, durable, robust, versatile and can be processed very well on conventional textile machines thanks to their flexibility. This makes them comparable to polystyrene, but still sustainable, as SA Dynamics uses bio-based and biodegradable raw materials.

"We can revolutionise the construction world with bio-based aerogel fibres," explains ITA founder Dr Sascha Schriever proudly. "If all insulation materials in construction are converted to bio-based aerogel fibres, all builders can realise their dream of a sustainable house."

SA Dynamics has come a good deal closer to its founding goal by winning the KUER.NRW 2023 business plan competition. The spin-off from Institut für Textiltechnik (ITA) and Department for Industrial Furnaces and Heat Engineering (IOB) at RWTH Aachen University is scheduled for spring 2025.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project (c) AZL Aachen GmbH
21.12.2023

AZL Aachen GmbH: Kick-off meeting for "Trends and Design Factors for Hydrogen Pressure Vessels" project

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting for the "Trends and Design Factors for Hydrogen Pressure Vessels" project, recently held at AZL Aachen GmbH, was a successful event, bringing together more than 37 experts in the field of composite technologies. This event laid a solid foundation for the Joint Partner Project, which currently comprises a consortium of 20 renowned companies from across the composite pressure vessel value chain: Ascend Performance Materials, C evotec GmbH, Chongqing Polycomp International Corp. (CPIC), Conbility GmbH, Elkamet Kunststofftechnik GmbH, F.A. Kümpers GmbH & Co. KG, f loteks plastik sanayi ticaret a.s., Formosa Plastics Corporation, Heraeus Noblelight GmbH, Huntsman Advanced Materials, Kaneka Belgium NV, Laserline GmbH, Mitsui Chemicals Europe GmbH, Plastik Omnium, Rassini Europe GmbH, Robert Bosch GmbH, Swancor Holding Co. Ltd. Ltd., TECNALIA, Toyota Motor Europe NV/SA, Tünkers do Brasil Ltda.

The project follows AZL´s well proven approach of a Joint Partner Project, aiming to provide technology and market insights as well as benchmarking of different material and production setups in combination with connecting experts along the value chain.

The kick-off meeting not only served as a platform to foster new contacts and get informed about the expertise and interests of the consortium members in the field of hydrogen pressure vessels, but also laid the groundwork for steering the focus of the upc oming project's ambitious phases. As a basis for the interactive discussion session, AZL outlined the background, motivation and detailed work plan. The central issues of the dialogue were the primary objectives, the most pressing challenges, the contribut ion to competitiveness, and
the priorities that would best meet the expectations of the project partners.

Discussions covered regulatory issues, the evolving value chain and the supply and properties of key materials such as carbon and glass fibres and resins. The consortium defined investigations into different manufacturing technologies, assessing their matu rity and potential benefits. Design layouts, including liners, boss designs and winding patterns, were thoroughly considered, taking into account their implications for mobile and stationary storage. The group is also interested in cost effective testing m ethods and certification processes, as well as the prospects for recycling into continuous fibres and the use of sustainable materials. Insight was requested into future demand for hydrogen tanks, OEM needs and strategies, and technological developments to produce more economical tanks.

The meeting highlighted the importance of CAE designs for fibre patterns, software suitability and the application dependent use of thermoset and thermoplastic designs.

The first report meeting will also set the stage of the next project phase, which will be the creation of reference designs by AZL's engineering team. These designs will cover a range of pressure vessel configurations using a variety of materials and production concepts. The aim is to develop models that not only re flect current technological capabilities, but also provide deep insight into the cost analysis of different production technologies, their CO2 footprint, recycling aspects and scalability.

AZL's project remains open to additional participants. Companies interested in joining this initiative are invited to contact Philipp Fröhlig.

Figure 1: Adsorption of a drop of waste oil within seconds by a leaf of the floating fern Salvinia molesta. Abbildung 1 © W. Barthlott, M. Mail/Universität Bonn
Figure 1: Adsorption of a drop of waste oil within seconds by a leaf of the floating fern Salvinia molesta.
14.12.2023

Self-driven and sustainable removal of oil spills in water using textiles

Researchers at the ITA, the University of Bonn and Heimbach GmbH have developed a new method for removing oil spills from water surfaces in an energy-saving, cost-effective way and without the use of toxic substances. The method is made possible by a technical textile that is integrated into a floating container. A single small device can remove up to 4 liters of diesel within an hour. This corresponds to about 100 m2 of oil film on a water surface.
 
Despite the steady expansion of renewable energies, global oil production, oil consumption and the risk of oil pollution have increased steadily over the last two decades. In 2022, global oil production amounted to 4.4 billion tons! Accidents often occur during the extraction, transportation and use of oil, resulting in serious and sometimes irreversible environmental pollution and harm to humans.

There are various methods for removing this oil pollution from water surfaces. However, all methods have various shortcomings that make them difficult to use and, in particular, limit the removal of oil from inland waters.

Researchers at the ITA, the University of Bonn and Heimbach GmbH have developed a new method for removing oil spills from water surfaces in an energy-saving, cost-effective way and without the use of toxic substances. The method is made possible by a technical textile that is integrated into a floating container. A single small device can remove up to 4 liters of diesel within an hour. This corresponds to about 100 m2 of oil film on a water surface.
 
Despite the steady expansion of renewable energies, global oil production, oil consumption and the risk of oil pollution have increased steadily over the last two decades. In 2022, global oil production amounted to 4.4 billion tons! Accidents often occur during the extraction, transportation and use of oil, resulting in serious and sometimes irreversible environmental pollution and harm to humans.

There are various methods for removing this oil pollution from water surfaces. However, all methods have various shortcomings that make them difficult to use and, in particular, limit the removal of oil from inland waters.

For many technical applications, unexpected solutions come from the field of biology. Millions of years of evolution led to optimized surfaces of living organisms for their interaction with the environment. Solutions - often rather unfamiliar to materials scientists and difficult to accept. The long-time routine examination of around 20,000 different species showed that there is an almost infinite variety of structures and functionalities. Some species in particular stand out for their excellent oil adsorption properties. It was shown that, e.g., leaves of the floating fern Salvinia molesta, adsorb oil, separate it from water surfaces and transport it on their surfaces (Figure 1, see also the video of the phenomon.).

The observations inspired them to transfer the effect to technical textiles for separating oil and water. The result is a superhydrophobic spacer fabric that can be produced industrially and is therefore easily scalable.

The bio-inspired textile can be integrated into a device for oil-water separation. This entire device is called a Bionic Oil Adsorber (BOA). Figure 2: Cross-section of computer-aided (CAD) model of the Bionic Oil Adsorber. The scheme shows an oil film (red) on a water surface (light blue). In the floating cotainer(gray), the textile (orange) is fixed so that it is in contact with the oil film and the end protrudes into the container. The oil is adsorbed and transported by the BOA textile. As shown in the cross-section, it enters the contain-er, where it is released again and accumulates at the bottom of the container. See also the video regarding the oil absorption on the textile, source ITA).
 
Starting from the contamination in the form of an oil film on the water surface, the separation and collection process works according to the following steps:

  • The BOA is introduced into the oil film.
  • The oil is adsorbed by the textile and separated from the water at the same time.
  • The oil is transported through the textile into the collection container.
  • The oil drips from the textile into the collection container.
  • The oil is collected until the container is emptied.

The advantage of this novel oil separation device is that no additional energy has to be applied to operate the BOA. The oil is separated from the surrounding water by the surface properties of the textile and transported through the textile driven solely by capillary forces, even against gravity. When it reaches the end of the textile in the collection container, the oil desorbs without any further external influence due to gravitational forces. With the current scale approximately 4 L of diesel can be separated from water by one device of the Bionic Oil Adsorber per hour.

  • It seems unlikely that a functionalized knitted spacer textile is cheaper than a conventional nonwoven, like it is commonly used for oil sorbents. However, since it is a functional material, the costs must be related to the amount of oil removed. In this respect, if we compare the sales price of the BOA textile with the sales prices of various oil-binding nonwovens, the former is 5 to 13 times cheaper with 10 ct/L oil removed.
    Overall, the BOA device offers a cost-effective and sustainable method of oil-water separation in contrast to conventional cleaning methods due to the following advantages:
  • No additional energy requirements, such as with oil skimmers, are necessary
  • No toxic substances are introduced into the water body, such as with oil dispersants
  • The textiles and equipment can be reused multiple times
  • No waste remains inside the water body
  • Inexpensive in terms of the amount of oil removed.
  • The team of researchers from the ITA, the University of Bonn and Heimbach GmbH was able to prove that the novel biomimetic BOA technology is surprisingly efficient and sustainable for a self-controlled separation and automatic collection of oil films including their complete removal from the water. BOA can be asapted for open water application but also for the use in inland waters. Furthermore, it is promising, that the textile can be used in various related separation processes. The product is currently being further developed so that it can be launched on the market in 2-3 years.

 

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

11.12.2023

OETI PPE customers awarded OEKO-TEX® STeP certification

Recently, OETI awarded the OEKO-TEX® STeP certification to two companies in the sector of personal protective equipment (PPE) and workwear: Ötscher - Berufskleidung Götzl GmbH, Austrian producer and wholesaler and longstanding PPE and OEKO-TEX® STANDARD 100 customer, and ALSICO MOROCCO (Cindico), a Moroccan PPE and work wear producer and part of the global Alsico Group, which has already introduced the certification for production facilities in Belgium and Laos.

OEKO-TEX® STeP stands for Sustainable Textile and Leather Production and is a certification system for production facilities in the textile and leather industry. The STeP system analyses critical areas of businesses using six modules: Chemical Management, Environmental Performance, Environmental Management, Social Responsibility, Quality Management, and Health protection and Safety at work.

For ALSICO MOROCCO (Cindico), OEKO-TEX® STeP offers the benefit of "a unified certification system and standardised audits to monitor social and ecological responsibility processes at global production locations," says Managing Director Mary Meylaers.

Recently, OETI awarded the OEKO-TEX® STeP certification to two companies in the sector of personal protective equipment (PPE) and workwear: Ötscher - Berufskleidung Götzl GmbH, Austrian producer and wholesaler and longstanding PPE and OEKO-TEX® STANDARD 100 customer, and ALSICO MOROCCO (Cindico), a Moroccan PPE and work wear producer and part of the global Alsico Group, which has already introduced the certification for production facilities in Belgium and Laos.

OEKO-TEX® STeP stands for Sustainable Textile and Leather Production and is a certification system for production facilities in the textile and leather industry. The STeP system analyses critical areas of businesses using six modules: Chemical Management, Environmental Performance, Environmental Management, Social Responsibility, Quality Management, and Health protection and Safety at work.

For ALSICO MOROCCO (Cindico), OEKO-TEX® STeP offers the benefit of "a unified certification system and standardised audits to monitor social and ecological responsibility processes at global production locations," says Managing Director Mary Meylaers.

For the Austrian company Ötscher – Berufskleidung (workwear), Managing Director Thiemo Götzl emphasises the strengths of the certification in transparent communication with customers and stakeholders and a comprehensive overview of all aspects of the supply chain. "The certification also supports compliance with the German Supply Chain Due Diligence Act requirements through transparency and risk mitigation," says Thiemo Götzl.

Source:

OETI - Institut für Oekologie, Technik und Innovation GmbH

Prof. Dr Tae Jin Kang (Seoul National University), Dr Musa Akdere (CarboScreen), Dr Christian P. Schindler (ITMF), from left to right. Source: ITMF
Prof. Dr Tae Jin Kang (Seoul National University), Dr Musa Akdere (CarboScreen), Dr Christian P. Schindler (ITMF), from left to right.
01.12.2023

Faster and cheaper carbon fibre production with CarboScreen

Faster and more cost-effective carbon fibre production - the technology of the start-up CarboScreen comes a good deal closer to this dream. The founders Dr. Musa Akdere, Felix Pohlkemper and Tim Röding from the Institut für Textiltechnik (ITA) of RWTH Aachen University are using sensor technology to monitor carbon fibre production, thereby doubling the production speed from the current 15 to 30 m/min in the medium term and increasing turnover by up to €37.5 million per year and system. This ground-breaking development also impressed the jury at the ITMF at their Annual Conference in Keqiao, China, and was honoured with the ITMF StartUp Award 2023 on 6 November 2023.

Dr. Musa Akdere accepted the award on behalf of the CarboScreen founding team.

Carbon fibres can only develop their full potential if they are not damaged during production and further processing. Two types of fibre damage occur more frequently during fibre production: Superficial or mechanical damage to the fibres or damage to the chemical structure.

Faster and more cost-effective carbon fibre production - the technology of the start-up CarboScreen comes a good deal closer to this dream. The founders Dr. Musa Akdere, Felix Pohlkemper and Tim Röding from the Institut für Textiltechnik (ITA) of RWTH Aachen University are using sensor technology to monitor carbon fibre production, thereby doubling the production speed from the current 15 to 30 m/min in the medium term and increasing turnover by up to €37.5 million per year and system. This ground-breaking development also impressed the jury at the ITMF at their Annual Conference in Keqiao, China, and was honoured with the ITMF StartUp Award 2023 on 6 November 2023.

Dr. Musa Akdere accepted the award on behalf of the CarboScreen founding team.

Carbon fibres can only develop their full potential if they are not damaged during production and further processing. Two types of fibre damage occur more frequently during fibre production: Superficial or mechanical damage to the fibres or damage to the chemical structure.

Both types of damage cannot be optimally detected by current means or only become apparent after production, to name just two examples. This leads to higher production costs. In an emergency, faulty production can even lead to plant fires. For this reason, and to ensure good production quality, the system is run at 15 m/min below its production capacity for safety reasons. However, 30 m/min or more would be possible. With the sensor-based online monitoring of CarboScreen, the production capacity can be doubled to 30 /min. This would lead to higher production, resulting in lower manufacturing costs and wider use of carbon fibres in mass markets such as automotive, aerospace and wind energy.

More information:
carbon fibers sensors Startup
Source:

ITA – Institut für Textiltechnik of RWTH Aachen University
 

Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right © AVK
Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right
23.11.2023

CarboScreen: Sensor monitoring for complex carbon fibre production

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

The production of carbon fibres is highly complex. In the current state of the art, however, the manufacturing process is only monitored manually by semi-skilled workers. However, even minimal fibre damage during production leads to a reduction in the quality of the carbon fibre. In extreme cases, it can also lead to plant fires. To ensure production quality, the production speed is currently limited to a maximum of 15 m/min. In fact, the production speed of the systems could be higher. The sensor-based online monitoring of Carbo-Screen makes it possible to increase the production speed to 30 m/min in the medium term. As a result of the increased production volume per system, the specific production costs of the carbon fibre are reduced, which can result in lower prices.

A reduced sales price would make it possible to use carbon fibres and their composite materials even more widely in traditional markets such as aerospace technology and wind energy, as well as for mass production in the automotive industry.

The CarboScreen online monitoring system is currently being developed for industrial use. It is to be validated at an industrial plant in 2024. CarboScreen GmbH was founded as part of EXIST funding and offers AI-supported sensor systems for carbon fibre production. The sensor technology continuously monitors the fibre throughout the entire production process. Deviations are detected automatically.

The winners of the AVK Innovation Award are honoured annually by the AVK Industrievereinigung Verstärkte Kunststoffe. Companies, institutes and their partners are honoured in three categories: products and applications, processes and procedures, and research and science.

Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

Akhlaq Hussain Photo OETI
Akhlaq Hussain
28.09.2023

OETI opens sales office in Pakistan

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Since 1967, ‘OETI - Institute for Ecology, Technology and Innovation’ has made a name for itself worldwide as an accredited and notified centre of excellence. With decades of experience as a service provider, the company specialises in the testing and certification of textiles, leather, personal protective equipment (PPE), floor coverings and interior furnishing materials. It also assesses indoor air quality. As a founding member of the international OEKO-TEX® association (1992) and official OEKO-TEX® testing institute, OETI also comprises the entire OEKO-TEX® product portfolio.

Between its own international branches and the branches of OETI’s Swiss parent company, TESTEX AG, OETI’s network of locations spans several continents. Recently, one more branch has been added in Pakistan (headquartered in Faisalabad).
OETI Pakistan is managed by Akhlaq Hussain, who has decades of experience in the textile and apparel industry for testing, inspection, certification, auditing, product safety, training and sustainability management.

Akhlaq Hussain’s main goal is to ‘create visibility for the OETI brand in Pakistan. We want to offer sustainable, reliable, and competitive services to Pakistan’s textile industry. My aim is to foster Pakistan’s exports by offering more sustainable certifications and training in environmental and social topics as well as due diligence in supply chains, which are in high demand in European countries.’

Markus Lang’s - OETI’s Global Head of Marketing & Sales – main goal is to ‘increase the awareness of sustainability within Pakistan’s textile and leather industry, which is also the main objective of our future development.’

More information:
Pakistan OETI
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Photo: MeineRaumluft
06.09.2023

OETI and MeineRaumluft join forces

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

More information:
OETI indoor climate
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Foto MeineRaumluft
05.09.2023

OETI und MeineRaumluft kooperieren

Das OETI, Institut fuer Oekologie, Technik und Innovation, kooperiert mit der unabhängigen Plattform "MeineRaumluft".

OETI, führend auf dem Gebiet der Innenraumluft-Zertifizierung in Österreich, will gemeinsam mit MeineRaumluft einen nachhaltigen Beitrag zur Optimierung des Raumklimas leisten. Ab kommenden Herbst setzen sie eine Initiative in Österreich um. Das Hauptziel ist, das Bewusstsein für die Bedeutung der Raumluft als Faktor für Gesundheit und Produktivität in Arbeits- und Büroumgebungen zu stärken. Dies durch Messungen der Innenraumluft, den Austausch von Erkenntnissen sowie praktische Empfehlungen umgesetzt.

OETI verfügt über eine profunde Expertise im Bereich der Innenraumluft-Messungen und -Zertifizierungen. Es ist gemäß ISO 16000 Teil 2, 3, 6, 9 und 11 sowie EN 16516 für Emissionsmessungen akkreditiert. Darüber hinaus setzt OETI mit seiner CLEANAIR Zertifizierung Standards für die Luftqualität in Innenräumen.

Das OETI, Institut fuer Oekologie, Technik und Innovation, kooperiert mit der unabhängigen Plattform "MeineRaumluft".

OETI, führend auf dem Gebiet der Innenraumluft-Zertifizierung in Österreich, will gemeinsam mit MeineRaumluft einen nachhaltigen Beitrag zur Optimierung des Raumklimas leisten. Ab kommenden Herbst setzen sie eine Initiative in Österreich um. Das Hauptziel ist, das Bewusstsein für die Bedeutung der Raumluft als Faktor für Gesundheit und Produktivität in Arbeits- und Büroumgebungen zu stärken. Dies durch Messungen der Innenraumluft, den Austausch von Erkenntnissen sowie praktische Empfehlungen umgesetzt.

OETI verfügt über eine profunde Expertise im Bereich der Innenraumluft-Messungen und -Zertifizierungen. Es ist gemäß ISO 16000 Teil 2, 3, 6, 9 und 11 sowie EN 16516 für Emissionsmessungen akkreditiert. Darüber hinaus setzt OETI mit seiner CLEANAIR Zertifizierung Standards für die Luftqualität in Innenräumen.

More information:
OETI Raumklima
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

ZCC Zünd Cut Center (c) Zünd Systemtechnik AG
ZCC Zünd Cut Center
01.09.2023

ZCC Zünd Cut Center: Neuer automatisierter Zuschnitt

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Zünd hat seine Bediensoftware ZCC Zünd Cut Center grundlegend überarbeitet. In der Version 4 bietet die Software neue Möglichkeiten für eine flexibel automatisierte Auftragsvorbereitung und einen effizienten Zuschnitt. Die Cuttersteuerung via Touchdisplay macht die Bedienung intuitiv und einfach.

Das neue ZCC Zünd Cut Center ist eine neue Option in Sachen Flexibilität, Skalierbarkeit und Benutzerfreundlichkeit. Es unterstützt die Bedienerin mit zahlreichen intuitiven, intelligenten Funktionen, die über den gesamten Produktionsworkflow des digitalen Zuschnitts hinweg eingebaut sind – eine Softwaresuite für den schnellen und einfachen Einstieg in den digitalen Zuschnitt und deutlichen Verbesserungen für Erfahrene in der Automatisierung von Auftragsvorbereitung und Produktion. ZCC will in jeder Situation qualitativ hochwertige Schneidergebnisse erreichen, unabhängig vom Erfahrungsgrad des Bedieners oder dem Automatisierungsgrad in der Datenaufbereitung.

Dank ihrer Client-Server-Architektur ist Zünd Cut Center flexibel skalierbar. Diese Modularität ermöglicht auf spezifische Produktionsanforderungen zugeschnittene Konfigurationen. Der Anwender erwirbt nur jene Softwarekomponenten, die er benötigt und kann jederzeit weitere Optionen hinzufügen.

ZCC Zünd Cut Center
Zünd bietet das ZCC in zwei verschiedenen Editionen an. Zünd Cut Center Basic ist geeignet für alle, die aufgrund ihrer Produktionsumgebung Funktionen wie einen automatischen Datenimport, eine Auftragsliste oder einen Datenaustausch mit anderen Systemen nicht benötigen. Mit ZCC Zünd Cut Center Basic kann der Bediener Quelldateien manuell über den Cut Editor in .zcc-Dateien umwandeln und als Produktionsdatei im Cut Center öffnen.

ZCC Zünd Cut Center Advanced ist die passende Edition für alle Anwender mit einem höheren Auftragsvolumen und dem Wunsch, durch automatisierte Abläufe die Produktivität zu steigern. Sie haben mehrere Zünd Cutter parallel im Einsatz und wollen zwecks Datenaustausch auch andere Produktionssysteme in den Workflow integrieren. In der Advanced-Edition stehen der Anwenderin Funktionen wie die Auftragsliste, Angaben zur geschätzten Produktionszeit, der Import über Hotfolder oder E-Mail-Benachrichtigungen zur Verfügung.

Für beide Editionen können Softwareoptionen wie Camera Option, Pick & Place Option, Visualizing Option und Routing Option individuell erworben werden.

Source:

Zünd Systemtechnik AG

Industriebrache Pixabay; Tama66
19.07.2023

IVC und ZVI positionieren sich klar gegen Pauschalverbot von PFAS

"Viele Unternehmen sitzen bereits auf gepackten Koffern und haben ihre Investitionsentscheidungen sind getroffen." Deutschland sei gerade erneut dabei, sich in multiple internationale Abhängigkeiten zu begeben und seinen Abschied aus dem Kreis der Industrienationen vorzubereiten. So beurteilen der Geschäftsführer der Industrievereinigung Chemiefaser e.V. (IVC), Dr. Wilhelm Rauch, und der Ressortleiter Umwelt-& Chemikalienpolitik des Zentralverbands Oberflächentechnik e.V. (ZVO), Dr. Malte M. Zimmer gemeinsam mit verschiedenen Unternehmen die Konsequenzen aus dem Plan der European Chemicals Agency (ECHA), rund 10.000 Alkylsubstanzen zu verbieten.

"Viele Unternehmen sitzen bereits auf gepackten Koffern und haben ihre Investitionsentscheidungen sind getroffen." Deutschland sei gerade erneut dabei, sich in multiple internationale Abhängigkeiten zu begeben und seinen Abschied aus dem Kreis der Industrienationen vorzubereiten. So beurteilen der Geschäftsführer der Industrievereinigung Chemiefaser e.V. (IVC), Dr. Wilhelm Rauch, und der Ressortleiter Umwelt-& Chemikalienpolitik des Zentralverbands Oberflächentechnik e.V. (ZVO), Dr. Malte M. Zimmer gemeinsam mit verschiedenen Unternehmen die Konsequenzen aus dem Plan der European Chemicals Agency (ECHA), rund 10.000 Alkylsubstanzen zu verbieten.

Die EU lasse dabei die Folgen auf Schlüsseltechnologien wie beispielsweise die grüne Energiewende komplett außer Acht. Lithiumbatterien, Windräder, Brennstoffzellen, Computerchips - für PFAS existierten aktuell zumindest in Hightech-Anwendungen keine Alternativen. Bis auf wenige längere Ausnahmeregelungen seien aktuell 18 Monate als Übergangsfristen vorgesehen. Das sei ein ausreichendes Zeitfenster, um die Produktion in Europa abzuwickeln und nach neuen Standorten zu suchen, beispielsweise in den USA. Dort werde die Fluorchemie als Schlüsseltechnologie massiv aufgebaut und als kostbares Gut mit Exportverboten belegt.

IVC und ZVO monierten, dass das Innovationsvermögen der europäischen Industrie hergeschenkt werde und man anderen Ländern den Markt mit allen preislichen und wettbewerblichen Konsequenzen überlasse. Als besonders betroffene Branchen führten die Verbände die Medizintechnik, Schutzausrüstung, Flugzeugbau und Automobilelektronik, den Textilmaschinenbau und Industrietextilien an. Abluftfilter mit PTFE-Membranen oder aus PTFE-Fasern stellten in der Müllverbrennung und in Zementwerken den Umweltschutz sicher, so dass keine Schadstoffe in die Atmosphäre gelangten. Membranen für Wasserstoff-Brennstoffzellen, Wasserstoffelektrolyseure, Lithium-Ionen-Batterien aus Karbonfaservliesen und der fluorchemischen Protonenaustauscher Nafion-Membran würden in Zukunft verboten und damit die die Pläne für eine Wasserstoffenergiewende dauerhaft nicht umsetzbar.

Source:

Industrievereinigung Chemiefaser e.V., Zentralverband Oberflächentechnik e.V.

OETI purchases ECS to expand its PPE portfolio photo: OETI
12.07.2023

OETI purchases ECS to expand its PPE portfolio

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

OETI – a member of the internationally active TESTEX Group – has bought the German company ECS to expand its service portfolio in the field of personal protective equipment (PPE).

OETI has been offering testing services for textile work clothing since 1983 – for about 40 years. Since the introduction of CE labelling for personal protective equipment and the enactment of the PPE Directive by the European Union in 1993, OETI has not only been testing textile personal protective equipment, but now on also certifies it in conformity with EU standards. In 1995, OETI was certified in Brussels as a Notified Body (0534) for type-examinations and quality assurance monitoring of personal protective equipment end products. Testing and certification is carried out in accordance with the current PPE Regulation (EU) 2016/425.

Testing and Certification Body for Eye and Face Protection, based in Aalen, was founded 15 years ago and is a globally active institution for testing and certification of eye and face protection equipment. The company is one of the leading independent testing institutions for personal protection products in laser applications and for welding work.

ECS tests and evaluates occupational health and safety goggles with and without a filter action, passive and active switching protection filters and shields for welders, and laser protection filters, goggles, and shields. The company also tests the optical properties of sunglasses, sports glasses, ski goggles, swimming goggles and motorbike goggles.

With OETI’s takeover, the ECS location in Aalen is retained, and all employees will continue working at ECS. The new Managing Director of ECS GmbH as of 1 July 2023 is Dipl.-Ing. Rolf Diebolder.

‘We are present on the European market, on the American market and, via a representative office, on the Chinese market. With the aid of the new distribution channels through OETI and TESTEX, we want to steadily advance ECS’ expansion and be present on all five continents’, says Managing Director Rolf Diebolder, explaining his strategic plans for ECS. ‘I would like OETI and ECS to develop a joint strategy in order to be able to offer existing and new customers of both companies a complete package which, when combined, will give us a unique selling point in the marketplace’, says Diebolder.

Diebolder also sees further potential in the cooperation with regard to protective laser clothing. According to him, this is where the laser laboratory commissioned by ECS could be used to make textiles laser-safe. In the future, there will be more and more ‘hand-held’ devices, i.e. laser welding devices, for which gloves and protective jackets are needed.

Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

Untersuchungsmethoden bei der Zertifizierung von Augenschutzprodukten
Untersuchungsmethoden bei der Zertifizierung von Augenschutzprodukten
11.07.2023

OETI kauft ECS zur Erweiterung des PSA-Portfolios

OETI – Mitglied der international tätigen TESTEX Gruppe – kauft das deutsche Unternehmen ECS, um sein Services-Portfolio im Bereich persönlicher Schutzausrüstungen (PSA) zu erweitern.

Seit rund 40 Jahren bietet das OETI – mit Hauptsitz in Österreich, Prüfungen für textile Arbeitskleidung an. Ab1993, mit der Einführung der CE-Kennzeichnung für persönliche Schutzausrüstung und dem Erlassen der PSA-Richtlinie durch die Europäische Union, prüft das OETI nicht nur textile persönliche Schutzausrüstungen, sondern zertifiziert sie auch EU-konform. Im Jahr 1995 erfolgt OETI‘s Notifizierung in Brüssel als Notified Body (0534) für Baumusterprüfungen und die Überwachung der Qualitätssicherung für das Endprodukt von persönlicher Schutzausrüstung. Geprüft und zertifiziert wird gemäß der aktuellen PSA-Verordnung (EU) 2016/425.

OETI – Mitglied der international tätigen TESTEX Gruppe – kauft das deutsche Unternehmen ECS, um sein Services-Portfolio im Bereich persönlicher Schutzausrüstungen (PSA) zu erweitern.

Seit rund 40 Jahren bietet das OETI – mit Hauptsitz in Österreich, Prüfungen für textile Arbeitskleidung an. Ab1993, mit der Einführung der CE-Kennzeichnung für persönliche Schutzausrüstung und dem Erlassen der PSA-Richtlinie durch die Europäische Union, prüft das OETI nicht nur textile persönliche Schutzausrüstungen, sondern zertifiziert sie auch EU-konform. Im Jahr 1995 erfolgt OETI‘s Notifizierung in Brüssel als Notified Body (0534) für Baumusterprüfungen und die Überwachung der Qualitätssicherung für das Endprodukt von persönlicher Schutzausrüstung. Geprüft und zertifiziert wird gemäß der aktuellen PSA-Verordnung (EU) 2016/425.

Die ECS GmbH - Prüf- und Zertifizierungsstelle für Augen- und Gesichtsschutz mit Sitz in Aalen wurde vor 15 Jahren gegründet und ist eine weltweit agierende Institution für die Prüfung und Zertifizierung von Augen- und Gesichtsschutzgeräten. Für persönliche Schutzprodukte bei Laseranwendungen und für Schweißarbeiten ist das Unternehmen eine der führenden unabhängigen Prüfeinrichtungen.

Die ECS prüft und bewertet Arbeitsschutzbrillen mit und ohne Filterwirkung, passive und aktiv-schaltende Schweißerschutzfilter und -abschirmungen, Laserschutzfilter, -brillen und -abschirmungen. Ebenso prüft das Unternehmen die optischen Eigenschaften von Sonnen-, Sport-, Ski-, Schwimm- und Motorradbrillen.

Nach der Übernahme durch OETI bleibt der ECS-Standort in Aalen erhalten, alle Mitarbeiter*innen sind weiterhin bei der ECS tätig. Neuer Geschäftsführer der ECS GmbH ist ab 1. Juli 2023 Dipl.-Ing. Rolf Diebolder.

„Wir sind auf dem europäischen, auf dem amerikanischen und über eine Vertretung auf dem chinesischen Markt präsent. Mit Hilfe der neuen Vertriebswege durch OETI und TESTEX wollen wir den Ausbau der ECS stetig vorantreiben und auf allen fünf Kontinenten präsent sein.“, so Geschäftsführer Rolf Diebolder.

Weiteres Potenzial in der Zusammenarbeit sieht Diebolder auch in Bezug auf Laserschutzkleidung. Hier könne das von der ECS beauftragte Laserlabor dazu genutzt werden, um Textilien Laserschutz-sicher zu machen. Es wird in Zukunft immer mehr „hand-held“ Geräte geben, also Laserschweißgeräte, für die man Handschuhe und Schutzjacken benötigt.

More information:
OETI PSA
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH