From the Sector

Reset
210 results
ATSKO: Durable care for outdoor equipment (c) ATSKO
22.06.2021

ATSKO: Durable care for outdoor equipment

To ensure that outdoor clothing and equipment can remain in use for a long time, the right care is crucial. The cleaning and impregnation products from ATSKO preserve and protect the fabric - and nature, too.

The outdoor season has begun - hikers, trail runners, bikers, campers and many others are now drawn back out into nature. To make sure that functional clothing and gear are optimally prepared for every situation, they should be regularly cleaned, cared for and impregnated, especially when the waterproofing starts to wear off or dirt stains affect the fabric. Thorough cleaning and care at the end of the season also ensure that the outdoor equipment survives storage in the basement or attic undamaged and can develop its full performance again next year. For almost 90 years, the US manufacturer ATSKO has been developing sustainable products for the most extreme outdoor challenges. ATSKO stands for moisture protection as well as waterproofing and conditioning agents for shoes, clothing and outdoor accessories that maintain functionality and extend service life. Thanks to their natural ingredients, ATSKO products are sustainable and protect nature.

To ensure that outdoor clothing and equipment can remain in use for a long time, the right care is crucial. The cleaning and impregnation products from ATSKO preserve and protect the fabric - and nature, too.

The outdoor season has begun - hikers, trail runners, bikers, campers and many others are now drawn back out into nature. To make sure that functional clothing and gear are optimally prepared for every situation, they should be regularly cleaned, cared for and impregnated, especially when the waterproofing starts to wear off or dirt stains affect the fabric. Thorough cleaning and care at the end of the season also ensure that the outdoor equipment survives storage in the basement or attic undamaged and can develop its full performance again next year. For almost 90 years, the US manufacturer ATSKO has been developing sustainable products for the most extreme outdoor challenges. ATSKO stands for moisture protection as well as waterproofing and conditioning agents for shoes, clothing and outdoor accessories that maintain functionality and extend service life. Thanks to their natural ingredients, ATSKO products are sustainable and protect nature.

ATSKO is best known for three brands in particular: SNO-SEAL® Bees Wax is used to care for and protect leather shoes and leather products and is based on natural beeswax. SILICONE WATER-GUARD® spray protects functional textiles and equipment from moisture and wear and is breathable. Since 1982, SPORT-WASH© has become the leading detergent for high-performance sportswear and functional clothing. All products are also available in practical travel sizes that can be easily taken on tour or on vacation.

The first SCOTT Racing Team Sustainable Biking Uniform (c) SCOTT Sports
21.06.2021

The first SCOTT Racing Team Sustainable Biking Uniform

SCOTT Racing Team confirms for the year 2021 its historical partners for the uniform: Rosti, Sitip and ROICA™ by Asahi Kasei, thanks to which it was possible to create the first sustainable biking uniform.
A partnership born in 2019 and celebrated at Ispo 2020, which has brought together leading companies for responsible innovation: Rosti for the style and manufacturing, Sitip for technical fabrics made from GRS (Global Recycled Standard) certified recycled yarns including ROICA™ EF, the certified recycled stretch premium ingredient produced by Asahi Kasei.

 

SCOTT Racing Team confirms for the year 2021 its historical partners for the uniform: Rosti, Sitip and ROICA™ by Asahi Kasei, thanks to which it was possible to create the first sustainable biking uniform.
A partnership born in 2019 and celebrated at Ispo 2020, which has brought together leading companies for responsible innovation: Rosti for the style and manufacturing, Sitip for technical fabrics made from GRS (Global Recycled Standard) certified recycled yarns including ROICA™ EF, the certified recycled stretch premium ingredient produced by Asahi Kasei.

 

Source:

SCOTT Sports / GB Network

Archroma: Launch of its new Color Atlas by Archroma® Polyester Library (c) Archroma
08.06.2021

Archroma: Launch of its new Color Atlas by Archroma® Polyester Library

  • A library of 1’440 off-the-shelf color standards, adding to the already available 4’320 colors of the ‘Color Atlas’ for cotton
  • Online and physical library of colors allowing increased speed-to market for sportswear and fashion designers, brands, retailers and manufacturers.

Archroma announced the launch of its new Color Atlas by Archroma® Polyester Library, with 1’440 colors for sportswear, athleisure, swimwear, children's clothing, shoes, fashion and home textiles.

This original Color Atlas Cotton Library contains 4’320 colors, almost double compared to similar tools available to textile and fashion specialists, with options for purer ingredients and lighter resource usage for brands exploring more sustainable collections.

The new Color Atlas by Archroma® Polyester Library brings together colors in line with current trends, from the most neutral tones to the most vivid hues to fluorescent colors.

  • A library of 1’440 off-the-shelf color standards, adding to the already available 4’320 colors of the ‘Color Atlas’ for cotton
  • Online and physical library of colors allowing increased speed-to market for sportswear and fashion designers, brands, retailers and manufacturers.

Archroma announced the launch of its new Color Atlas by Archroma® Polyester Library, with 1’440 colors for sportswear, athleisure, swimwear, children's clothing, shoes, fashion and home textiles.

This original Color Atlas Cotton Library contains 4’320 colors, almost double compared to similar tools available to textile and fashion specialists, with options for purer ingredients and lighter resource usage for brands exploring more sustainable collections.

The new Color Atlas by Archroma® Polyester Library brings together colors in line with current trends, from the most neutral tones to the most vivid hues to fluorescent colors.

Source:

Archroma / EMG

Sappi: New Sublimation Paper for Textile Industry (c) Sappi
08.06.2021

Sappi: New Sublimation Paper for Textile Industry

Sappi offers Transjet Tacky Industrial, a coated dye sublimation paper for digital transfer printing, specially developed for high-speed inkjet printing on highly elastic textiles. Also new is the uncoated dye sublimation paper Basejet, which has been developed for light designs for high-speed digital printing of fashion and home textiles.

  • Transjet Tacky Industrial: Immediate tack effect, high ink transfer, fast ink drying; no ghosting on elastic textiles thanks to reversible tack
  • Basejet: Consistent print quality for light designs, fast ink-drying, very fast transfer process

Transjet Tacky Industrial enables highly elastic fabrics to be printed on industrial high-speed machines that work with a higher glycol content, such as printheads from Kyocera. The paper is first printed with the desired image or pattern which is then transferred to the elastic polyester fabric by means of heat and pressure.

Sappi offers Transjet Tacky Industrial, a coated dye sublimation paper for digital transfer printing, specially developed for high-speed inkjet printing on highly elastic textiles. Also new is the uncoated dye sublimation paper Basejet, which has been developed for light designs for high-speed digital printing of fashion and home textiles.

  • Transjet Tacky Industrial: Immediate tack effect, high ink transfer, fast ink drying; no ghosting on elastic textiles thanks to reversible tack
  • Basejet: Consistent print quality for light designs, fast ink-drying, very fast transfer process

Transjet Tacky Industrial enables highly elastic fabrics to be printed on industrial high-speed machines that work with a higher glycol content, such as printheads from Kyocera. The paper is first printed with the desired image or pattern which is then transferred to the elastic polyester fabric by means of heat and pressure.

Sublimation paper for the textile industry
The new dye sublimation paper offers many benefits for the textile industry, which frequently has to adapt to changing trends. As it is suitable for use on high-speed digital printers, significantly more designs can be printed in the same time than was previously possible on plotters. Thanks to a special heat-reactive coating, the paper adheres to highly stretchable content, while the reversible tack prevents ghosting and textile shrinkage. Transjet Tacky
Industrial has a high ink load capacity so the print can be better accentuated due to strong colour saturation. The design remains clearly visible when the fabric is stretched to its maximum, which is often the case with sportswear in particular.

Basejet specially for light designs
Sappi has also added the Basejet uncoated dye sublimation paper to its portfolio, an additional solution for the digital printing of fashion and home textiles in consistent print quality. The uncoated dye sublimation paper is intended in particular for light designs and cost-driven production processes.

Source:

Sappi Europe

ROICA™ by Asahi Kasei turns 50 and  unveils its new visual identity (c) ROICA, Asahi Kasei Corporation
25.05.2021

ROICA™ by Asahi Kasei turns 50 and unveils its new visual identity

"ROICA™ new identity is the ultimate upgrade and milestone of the brand’s evolution path which brings together and merges performance, innovation and responsible imprint. ROICA™ strategic commitment is built on two main pillars that meet value driven consumer’s expectations: first, continuous R&D and innovation activities focusing on new contemporary stretch functionalities with the highest integration of sustainability. Second, developing synergies and partnerships with leading responsible innovators throughout the whole value chain from throwsters down to consumers, people and companies sharing the same goals", declares Shinichiro Haga, Senior Executive Manager of ROICA Division.

ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

"ROICA™ new identity is the ultimate upgrade and milestone of the brand’s evolution path which brings together and merges performance, innovation and responsible imprint. ROICA™ strategic commitment is built on two main pillars that meet value driven consumer’s expectations: first, continuous R&D and innovation activities focusing on new contemporary stretch functionalities with the highest integration of sustainability. Second, developing synergies and partnerships with leading responsible innovators throughout the whole value chain from throwsters down to consumers, people and companies sharing the same goals", declares Shinichiro Haga, Senior Executive Manager of ROICA Division.

ROICA™ identity will be activated in all its communication tools and channels, such as a renovated website and social media presence.

Balanced geometries, calibrating color and different anatomical details: the visual identity is then declined in 5 different designs, each for one of the 5 applications that can be enhanced by ROICA™ yarns: ACTIVATION for performative sportswear garments, AQUA for smooth swimwear, STYLE#FIT for casual wear and athleisure, ESSENTIALS for next to skin lingerie and underwear and LEGWEAR for stylish hosiery. A complete wardrobe.

The company also created and introduced a branding policy indicating the allowed blends for their smart yarns belonging to the unique ROICA Eco-Smart™ family for complete transparency and transparent authentic communication.

Constant investments in R&D, people and technology allowed the company to engineer agile, multi-facetted and sustainable stretch yarns which redefine the new circularity, delivering the style, support and finish, trusted to match the performance demands and ambitions of the new generation contemporary consumer.

More information:
ROICA™ fibres Yarns digital
Source:

GB Network Marketing & Communication

21.05.2021

Alchemie Technology and HeiQ create sustainable textile finishing partnership

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

Alchemie Technology, a leader in waterless, digital on-demand, smart dyeing technology, has today announced its partnership with HeiQ, a leader in textile innovation, as it prepares the production rollout of its NOVARATM digital multifunction finishing solution to the global textile market in Q3 this year.

NOVARA can apply single-sided, or simultaneous two-sided, coating of multiple finishes to specific areas of textile. For example, combining anti-odour and water repellence in one material.

“For example, using NOVARA for single-sided finishing of HeiQ Viroblock required 52% less chemistry, 66% water reduction and 50% less energy, whilst achieving a 99.7% reduction in antimicrobial activity after 15 washes at 400celsius. With the huge demand for high-performance antibacterial, antiviral finishing for face masks, medical apparel, gym wear, home furnishing, mattresses, and textiles for high-risk, high traffic areas such as train, plane seats, and more, our combined technology is critical for increasing protection and reducing environmental impact of these products” says Dr Simon Kew, Managing Director, Alchemie Technology.

NOVARA also enables unique lifestyle product innovations at lower production cost for fashion, sportswear, technical clothing, and upholstery such as combining sustainable odour control, skin care additives, and fragrance finishing, without impacting breathability, hand feel or wicking. It is suitable for finishing all fabric types, from 50 - 1000 gsm, including polyester, cotton, nylon and polycotton.

(c) Huntsman Textile Effects
12.05.2021

Huntsman Textile Effects at Performance Days Digital Fair Week

  • Huntsman Textile Effects presents range of high-performance solutions for performance apparel

Huntsman Textile Effects, global leader in innovative solutions and environmentally sustainable products, will highlight its extensive end-to-end suite of protection effects and high-performance solutions for performance apparel at the Performance Days Digital Fair Week this May. Huntsman will also deliver a presentation on sustainability, showcasing the top megatrends impacting the textile industry.

With increasing adoption of active lifestyles and outdoor activities, consumers are demanding high-performance, yet comfortable and sustainably-produced sportswear. Consumers are looking for brands that incorporate sustainable processes and principles in their operations.

  • Huntsman Textile Effects presents range of high-performance solutions for performance apparel

Huntsman Textile Effects, global leader in innovative solutions and environmentally sustainable products, will highlight its extensive end-to-end suite of protection effects and high-performance solutions for performance apparel at the Performance Days Digital Fair Week this May. Huntsman will also deliver a presentation on sustainability, showcasing the top megatrends impacting the textile industry.

With increasing adoption of active lifestyles and outdoor activities, consumers are demanding high-performance, yet comfortable and sustainably-produced sportswear. Consumers are looking for brands that incorporate sustainable processes and principles in their operations.

“The upward trend in the performance apparel segment is spurred on by the demands and evolving needs of consumers; sustainability also remains the top of mind amongst these consumers. At Huntsman, we are delighted to be able showcase our suite of solutions that are high-performing and sustainable, so that mills and brands are better able to meet the fast-changing market needs,” said Dhirendra Gautam, Senior Director – Global Market Strategy and Innovation, Huntsman Textile Effects.

Huntsman’s featured solutions:

  • Complete end-to-end systems for protection effects, from pre-treatment to coloration and finishing
  • Revolutionary antimicrobial and odor-control solutions from Sciessent - The Agion®, Lava X2® and Active X2® products will be featured at the upcoming show
  • HIGH IQ® intelligent effects is a set of brand assurance programs that support accelerated evaporation, water and stain repellence, lasting color and cool comfort, ensuring garments dry quickly for long-lasting comfort

Performance Days Digital Fair Week will take place digitally from May 17-21, 2021. Huntsman will also deliver a presentation on May 18, 2021, at 2 p.m. (CEST) at the Expert Talk session. Titled “Sustainability & Textiles: Being the Change That We Want to See”, the presentation will showcase the megatrends that will define the next five years, and the textile and apparel industries’ quest for more sustainable design, product development, production methods and garment care.

Source:

Huntsman Textile Effects

06.05.2021

PERFORMANCE DAYS Fair with Topic: Still Physical – Your Success Story of 2020

Contact restrictions, home office and altered daily lives – our lives in 2020 were radically changed. This was also the case for various sectors of the economy, including the textile and clothing industry. However, with crisis come opportunities and stimuli for change. Under the motto “Still Physical”, manufacturers recount their personal success stories in 2020 – the industry can look forward to a selection of sustainable materials curated exclusively by the PERFORMANCE FORUM Jury. Areas of focus: natural fibers that highlight wellbeing aspects, plant-based materials that make us strong and excite on an emotional level, bio-nylons and bio-based finishings that rethink function. “Still Physical – Your Success Story of 2020” will be on display online as the first of its kind within a trade fair week from 17 to 21 May 2020.

Contact restrictions, home office and altered daily lives – our lives in 2020 were radically changed. This was also the case for various sectors of the economy, including the textile and clothing industry. However, with crisis come opportunities and stimuli for change. Under the motto “Still Physical”, manufacturers recount their personal success stories in 2020 – the industry can look forward to a selection of sustainable materials curated exclusively by the PERFORMANCE FORUM Jury. Areas of focus: natural fibers that highlight wellbeing aspects, plant-based materials that make us strong and excite on an emotional level, bio-nylons and bio-based finishings that rethink function. “Still Physical – Your Success Story of 2020” will be on display online as the first of its kind within a trade fair week from 17 to 21 May 2020.

Transformation: Technology first?
The pandemic has forced us into new, primarily digital forms of living and working. Our daily lives are characterised by home offices, home schooling and online meetings. The desire for real, physically perceptible experiences has grown incessantly within the last year. In the same context, people nowadays are strongly driven by technological progress – yet how far can we allow technological change to go and how do we wish to live in the future? Long before the pandemic, the trend towards self-monitoring and control of important bodily functions developed. The sports industry developed tools to measure levels of performance and monitor bodily functions with the goal of enhancing performance. Self-optimisation, body shaping and health promotion have become standard nowadays. Staying healthy and keeping fit are now social imperatives in our performance-oriented society. The pandemic has made us rethink, made us pause – with sustainable function still in focus, yet function needs to be rethought for the future, distancing ourselves from mere performance enhancement, and embracing clothing that facilitates people in feeling good.

Touch & Feel
In a visual, digital world, one sense has been forgotten: the sense of touch. Materials trigger completely different reactions, consciously or unconsciously. Moreover, the surface texture is also decisive in the functionality of a fabric, lending it its unique characteristics. In times of contact restrictions and lockdown, there is a need for a space for emotions, for regeneration and physical wellbeing. This is also reflected in the desire for appropriate apparel that leaves a pleasant sensation on the skin. Lightweight, warm and of a softer nature, plant-based fibers fulfil the desire for comfort and promote wellbeing.

We are physical – we are nature
How will we shape and adapt the post-pandemic textile and apparel industry? The Corona crisis once again reminds us of our existential bond with the natural world. While humanity fights against the spread of a deadly virus with social isolation, one thing is doing well: our planet. It is recovering from all the exhaust gases that are released into the air daily by cars and factories. There is a shift in focus towards taking time out in nature, whether in the form of a morning run, a mountain hike or a yoga session on the grass.

Your success story of 2020
What has touched them? Which experiences have shaped their latest innovations? Does the crisis also present opportunities? The chance for something new, for a rethink, on an even more sustainable, more ecological path? Which highlights, which stories are worth communicating and where did the focus lie in 2020? Various material manufacturers already started to focus on sustainability and the cautious use of resources some time ago. Innovations in the areas of materials and in processing methods are the driving forces of the development towards more sustainability. However, we need to realign all processes and structures in our supply and production chains and adapt them to the needs of a resource-conserving, responsible industry. A pioneering example of such alignment was the decision of PERFORMANCE DAYS to only present sustainable materials at the PERFORMANCE FORUM from the November 2019 trade fair event onwards. Additionally, the setting-up of the new digital sourcing platform “THE LOOP” shows how technology can be implemented aside from material and processing innovations in such a way that our procedures and structures can be adapted to difficult conditions.

Informative & up-to-date: the digital trade fair week from 17 to 21 May 2021
As usual, the highlighted fabrics from the Focus Topic “Still Physical”, which the exhibitors have defined as their personal success stories, will be available shortly on the PERFORMANCE DAYS website highlighting all details and facets.

Kitlocker Implements Kornit Avalanche Poly Pro for Efficient, Versatile Sportswear Production on Demand (c) Kitlocker
Mike Kent
24.03.2021

Kitlocker Implements Kornit Avalanche Poly Pro for Efficient, Versatile Sportswear Production on Demand

The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced United Kingdom-based Kitlocker has implemented two Kornit Avalanche Poly Pro systems for efficient, retail-quality production of branded and customized apparel on demand.

The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, announced United Kingdom-based Kitlocker has implemented two Kornit Avalanche Poly Pro systems for efficient, retail-quality production of branded and customized apparel on demand.

Kitlocker operates within several sectors of the sports and leisurewear market, providing team gear for schools, football clubs, and other sporting organizations, managing e-commerce platforms on behalf of those organizations. Enabling their customers to embellish popular styles on demand, in any quantity, drove them to explore available technologies for speed and versatility, particularly regarding polyester apparel, a cornerstone of sportswear. Kornit’s Poly Pro system is the only single-step digital direct-to-garment (DTG) technology developed specifically for imprinting polyester and poly-blend materials, extending the company’s patented process for waste-free production with durability, precise graphic detail, and the broadest colour gamut to popular sports and athleisure apparel.

“The Kornit Avalanche Poly Pro allows for far superior quality of finish for embellishment compared to traditional print techniques,” says Mike Kent, Co-Owner of Kitlocker. “When we were shopping around for alternatives, it was obvious the sort of single pass, and its ability to print on polyester, was certainly market-leading—there was no alternative that could do that. The machines are quick and reliable, with very little downtime, which is massively important to me as a business owner.”

According to Kent, the technology has enabled Kitlocker to approach new markets that had always been off-limits previously, driving incremental business and building out new product ranges. The process lent itself to simple integration with their workflow and online design tools, empowering customers to visualize their own pieces and receive finished gear, with superior retail quality and precise logo colour matching, in mere days.

“The system allows us bigger print areas, more colours, and more elaborate designs, and our customers to uniquely embellish their garments on a wide range of products from different brands with lots of different kinds of creative outputs,” adds Kent.

“Our systems help brands like Kitlocker sync supply with demand, eliminating waste and making them more reactive to customer needs,” says Chris Govier, KDEU Managing Director. “Kornit Avalanche Poly Pro extends the efficiency, sustainability, quality, and logistical benefits of digitization to the booming sports and athleisure apparel market. Being able to give their customers the widest assortment of gear, customized in any quantity, on demand, is a winning game plan for Kitlocker.”

Source:

pr4u press contact

Hochschule Niederrhein: Projekt gegen textilbasiertes Mikroplastik legt Ergebnisse vor (c) Hochschule Niederrhein
Stefan Brandt im Waschlabor der Hochschule Niederrhein.
22.03.2021

FTB: Projekt gegen textilbasiertes Mikroplastik legt Ergebnisse vor

Waschen und Stricken für die Umwelt – das galt drei Jahre lang im Forschungsinstitut Textil und Bekleidung der Hochschule Niederrhein (FTB). Als Partner des Projekts TextileMission, einer mit rund 1,7 Millionen Euro vom Bundesministerium für Bildung und Forschung geförderten Initiative gegen Mikroplastik in der Umwelt, ging es den Forscherinnen und Forschern der Hochschule Niederrhein um Vermeidungsstrategien beim Waschen – und um neue Materialien, die weniger Mikroplastik absondern.

Mikroplastik sind kleine Kunststoffpartikel mit einem Durchmesser von weniger als 5mm. Sie befinden sich unter anderem in Sporttextilien und gelangen beim Waschen mit dem Abwasser in die Kläranlangen und im schlimmsten Fall bis ins Meer. Nach drei Jahren Forschung wurden nun im Rahmen einer ganztägigen digitalen Abschlusskonferenz die wesentlichen Erkenntnisse der Forschungsarbeit in Fachvorträgen vorgestellt. Über 200 Interessierte aus Wirtschaft, Forschung, Lehre und Politik aus der ganzen Welt nahmen an der Konferenz teil.

Waschen und Stricken für die Umwelt – das galt drei Jahre lang im Forschungsinstitut Textil und Bekleidung der Hochschule Niederrhein (FTB). Als Partner des Projekts TextileMission, einer mit rund 1,7 Millionen Euro vom Bundesministerium für Bildung und Forschung geförderten Initiative gegen Mikroplastik in der Umwelt, ging es den Forscherinnen und Forschern der Hochschule Niederrhein um Vermeidungsstrategien beim Waschen – und um neue Materialien, die weniger Mikroplastik absondern.

Mikroplastik sind kleine Kunststoffpartikel mit einem Durchmesser von weniger als 5mm. Sie befinden sich unter anderem in Sporttextilien und gelangen beim Waschen mit dem Abwasser in die Kläranlangen und im schlimmsten Fall bis ins Meer. Nach drei Jahren Forschung wurden nun im Rahmen einer ganztägigen digitalen Abschlusskonferenz die wesentlichen Erkenntnisse der Forschungsarbeit in Fachvorträgen vorgestellt. Über 200 Interessierte aus Wirtschaft, Forschung, Lehre und Politik aus der ganzen Welt nahmen an der Konferenz teil.

Dr. Jens Meyer und Dipl.-Ing. Stefan Brandt, wissenschaftliche Mitarbeiter am FTB, haben im Waschlabor der Hochschule Niederrhein über 1000 Waschvorgänge an Sport- und Outdoortextilien aus 100 Prozent Polyesterfasern durchgeführt und ausgewertet. „Die mit Abstand höchsten Emissionen treten in den ersten drei Wäschen eines Textils auf“, betonen sie. Die Versuche zeigen, dass Textilien zwischen 50 bis 850 mg faseriges Mikroplastik pro kg Textil über die Anzahl von zehn Wäschen in Summe in das Abwasser emittieren.

Zwar würden bis zu 95 Prozent der Kleinstpartikel in Kläranlagen zurückgehalten werden, dennoch müsse man mit 2,1 bis 49 Tonnen Eintrag in die Umwelt pro Jahr in Deutschland allein durch Haushaltswäsche rechnen, so Prof. Dr.-Ing. Maike Rabe, eine der Leiterinnen des Projekts. Textilien müssten so konstruiert und verarbeitet werden, dass der Austritt von Mikroplastik deutlich minimiert wird. Um Textilien überhaupt im Hinblick auf ihren Gehalt an faserigem Mikroplastik bewerten zu können, wurde in globalen Teams die Entwicklung eines harmonisierten Schnelltests zur Bewertung und Verbesserung von Textilien im Rahmen des Vorhabens vorangetrieben.

An diesem Punkt setzte der Vortrag von Professorin Ellen Bendt, ebenfalls Projektleiterin, an, die sich der Materialoptimierung und neuen Konstruktionen widmete. Ziel war es, insbesondere für den Sportbereich emissionsärmer gestaltete Materialien zu entwickeln. Das Forscherteam konzentrierte sich hierbei besonders auf die Fleece-Textilien. Aufgrund der hohen Funktionalität sind sie kaum vom Markt wegzudenken.
Auf der Suche nach Lösungsansätzen zur Verringerung des Mikroplastikaustrags bei Fleece, konzentrierte sich das Forschungsteam auf den Einsatz von biologisch abbaubaren Fasern. „Diese stellen eine mögliche Alternative zu synthetischen, nicht abbaubaren Fasern dar“, erklärte Ellen Bendt.

Neben der Hochschule Niederrhein waren der Bundesverband der Deutschen Sportartikelindustrie e. V (BSI), WWF Deutschland, VAUDE Sport GmbH und die TU Dresden an der Initiative beteiligt. Auch die assoziierten Partner des Forschungsprojekts Adidas, Miele, Henkel und Polartec nahmen an dem Austausch der Forschungsergebnisse teil.
 

BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance (c) RUDOLF GmbH
BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance
03.03.2021

BIONIC-FINISH®ECO by RUDOLF GROUP

  • BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance

In recent years, many scientists have shifted from favoring a “primordial soup” in pools of water to hydrothermal vents deep in the ocean as the original source of life on Earth. Regardless what the real beginning really was, water was certainly involved in the process some 3,5bln years ago. And since then, Mother Nature designed many ways to benefit of water and to be sheltered from it. Many engineering challenges humans face can be solved by turning to those 3,5bln years of experience and by using natural design as springboard. That’s biologically inspired engineering or, in short, bionics. BIONIC-FINISH®ECO of RUDOLF GROUP is Mother Nature’s work reproduced on textiles and apparel to protect us from water. To perform.

  • BIONIC-FINISH®ECO Fluorine-Free, Water Repellent Finishes for Ultimate Performance

In recent years, many scientists have shifted from favoring a “primordial soup” in pools of water to hydrothermal vents deep in the ocean as the original source of life on Earth. Regardless what the real beginning really was, water was certainly involved in the process some 3,5bln years ago. And since then, Mother Nature designed many ways to benefit of water and to be sheltered from it. Many engineering challenges humans face can be solved by turning to those 3,5bln years of experience and by using natural design as springboard. That’s biologically inspired engineering or, in short, bionics. BIONIC-FINISH®ECO of RUDOLF GROUP is Mother Nature’s work reproduced on textiles and apparel to protect us from water. To perform.

Back in 2003, RUDOLF GROUP borrowed from Mother Nature the idea of dendrimers (from dendron, Greek word for ‘tree’), molecules made of multi-functional branches that interact among themselves, co-crystallize, and self-organize into highly ordered, multicomponent systems. These hyper-branched polymers attach to the textile and embed fluorine-free, durable water-repellent performance.
In 2021 BIONIC-FINISH®ECO comes as a reviewed and extended family of unique nonhalogenated, APEO-free, fluorine-free formulations suited for different materials and designed for different applications and needs. Still very much based on patented dendrimer technology, the new and strengthened BIONIC-FINISH®ECO’s product portfolio:

• Provides non-fluorinated and highly durable water repellent textile finishes for high-performance, professional applications (e.g. when brushing resistance is required);
• Delivers highly efficient and durable performance with low application amounts thus not affecting fabric feel and appearance (e.g. when remarkable softness is important);
• Fulfills a range of challenging technical requirements (e.g. minimal impact on flame retardant properties of technical fibers);
• Is suitable for both sportswear and outdoor applications, as well as for casual apparel and fashion clothing;
• Is bluesign® approved, ZDHC chemical gateway certified and compliant with most RSLs;

BIONIC-FINISH®ECO new portfolio includes universal and versatile solutions targeting the most standard requirements, as well as customized solutions that meet more demanding and specific expectations such as improved resistance to dry-cleaning. “None of us can entirely predict where our voyage will lead” says Dr. Gunther Duschek, RUDOLF GROUP Managing Director. “However, BIONIC-FINISH®ECO of RUDOLF GROUP will always be the fluorine-free, durable water repellent for ultimate  performance. As it is today”.

DSM/Sympatex Technologies: Launch of Bio-based Arnitel® specialty materials (c) Sympatex® Technologies
05.02.2021

DSM/Sympatex Technologies: Launch of Bio-based Arnitel® specialty materials

Royal DSM announces that its DSM Engineering Materials business will launch mass-balanced bio-based Arnitel®, a thermoplastic elastomer, together with Sympatex Technologies. In this way, DSM Engineering Materials is taking the next step on its sustainability journey and enabling its customers to transition to a more circular and bio-based economy.

To address growing consumer and legislative demand for lower carbon footprint and more sustainable feedstock, the sports and apparel value chain is increasingly integrating bio-based materials into its designs. By offering a new range of mass-balanced bio-based Arnitel®, DSM Engineering Materials is enabling membrane manufacturer, Sympatex Technologies to meet these demands and make more sustainable choices.

DSM’s bio-based Arnitel® is manufactured with bio-based feedstock using a mass-balance approach1. The end product contains more than 25% bio-based content by weight.

Royal DSM announces that its DSM Engineering Materials business will launch mass-balanced bio-based Arnitel®, a thermoplastic elastomer, together with Sympatex Technologies. In this way, DSM Engineering Materials is taking the next step on its sustainability journey and enabling its customers to transition to a more circular and bio-based economy.

To address growing consumer and legislative demand for lower carbon footprint and more sustainable feedstock, the sports and apparel value chain is increasingly integrating bio-based materials into its designs. By offering a new range of mass-balanced bio-based Arnitel®, DSM Engineering Materials is enabling membrane manufacturer, Sympatex Technologies to meet these demands and make more sustainable choices.

DSM’s bio-based Arnitel® is manufactured with bio-based feedstock using a mass-balance approach1. The end product contains more than 25% bio-based content by weight.

Sympatex uses Arnitel® to manufacture its waterproof, windproof, and breathable membranes for sports applications. The transition to bio-based feedstock will maintain the unique functional properties of Arnitel® and will enable Sympatex to easily shift to a more sustainable solution with a lower carbon footprint without having to requalify materials.

 

1 Mass balance accounting is a well-known approach that has been designed to trace the flow of materials through a complex value chain. The mass balance approach provides a set of rules for how to allocate the bio-based and/or recycled content to different products to be able to claim and market the content as ‘bio’-based or ‘recycled’-based. Source: Ellen MacArthur Foundation (Mass Balance White Paper).

DIGEL AG: Neuer Head of Sportswear (c) DIGEL AG
Thomas Beller
07.01.2021

DIGEL AG: New Head of Sportswear

Since 1 January 2021, Thomas Beller has been responsible for the sportswear division of the Digel brand in the newly created position of HEAD OF SPORTSWEAR.

Thomas Beller was responsible for the sportswear of the Strellson brand for many years.
Most recently, he was responsible for the product and design of the Navy Boot brand.

"We are pleased that we have been able to win Thomas Beller, an experienced leader in the field of product and design, for the Digel brand. With his expertise, Mr Beller will help us to successfully implement the growth strategy for the Digel brand," says Marc Svojanovsky, Board Member for Product, Marketing and Sales.

Ralf Kammerer will continue to be responsible for formal wear at Digel as HEAD OF FORMALWEAR. Both report directly to the board member Marc Svojanovsky.

Since 1 January 2021, Thomas Beller has been responsible for the sportswear division of the Digel brand in the newly created position of HEAD OF SPORTSWEAR.

Thomas Beller was responsible for the sportswear of the Strellson brand for many years.
Most recently, he was responsible for the product and design of the Navy Boot brand.

"We are pleased that we have been able to win Thomas Beller, an experienced leader in the field of product and design, for the Digel brand. With his expertise, Mr Beller will help us to successfully implement the growth strategy for the Digel brand," says Marc Svojanovsky, Board Member for Product, Marketing and Sales.

Ralf Kammerer will continue to be responsible for formal wear at Digel as HEAD OF FORMALWEAR. Both report directly to the board member Marc Svojanovsky.

More information:
Digel AG Sportswear
Source:

DIGEL AG

03.12.2020

JEC Summit Sports & Health - Connect 8-10th December

Starting on December 8, professionals from the whole composites value chain across the globe will be able to meet online, network, and build long-lasting relationships thanks to the JEC Summit Sport & Health. The goal of this event is to allow decision-makers to learn about the current challenges and opportunities of the sports and medical fields, this thanks to the three-day program integrating keynote speeches, industry sessions, workshops, startups, and business meetings.

 

Please read attached document for more information about the program.

Starting on December 8, professionals from the whole composites value chain across the globe will be able to meet online, network, and build long-lasting relationships thanks to the JEC Summit Sport & Health. The goal of this event is to allow decision-makers to learn about the current challenges and opportunities of the sports and medical fields, this thanks to the three-day program integrating keynote speeches, industry sessions, workshops, startups, and business meetings.

 

Please read attached document for more information about the program.

Sonntag Fins Switch to Sicomin’s GreenPoxy® 33 Bio Resin (c) Sicomin
Ben vd Steen Flying high
30.11.2020

Sonntag Fins Switch to Sicomin’s GreenPoxy® 33 Bio Resin

Sicomin’s latest marine collaboration with Sonntag Fins sees its industry leading GreenPoxy® 33 bio-based epoxy resin used for custom carbon fibre windsurf fins - combining speed, fatigue performance and sustainability for some of the fastest sailors afloat.

Targeted at windsurf slalom sailors, racers and speed sailors, each Sonntag fin is a custom made product, tailored specifically to the user based on a discussion about riding style, physical size and weight, as well as how the rider likes to load the fin whilst sailing.  This attention to detail and bespoke manufacturing places a huge importance on the performance and consistency of the raw materials used, with all new materials having to be validated in production, on the test rig in the lab, and on the water by the team riders.

Sicomin’s latest marine collaboration with Sonntag Fins sees its industry leading GreenPoxy® 33 bio-based epoxy resin used for custom carbon fibre windsurf fins - combining speed, fatigue performance and sustainability for some of the fastest sailors afloat.

Targeted at windsurf slalom sailors, racers and speed sailors, each Sonntag fin is a custom made product, tailored specifically to the user based on a discussion about riding style, physical size and weight, as well as how the rider likes to load the fin whilst sailing.  This attention to detail and bespoke manufacturing places a huge importance on the performance and consistency of the raw materials used, with all new materials having to be validated in production, on the test rig in the lab, and on the water by the team riders.

With this in mind, Sonntag Fins approached Time Out Composite, Sicomin’s German distributor,  looking for a new resin system that could reduce cycle times and improve manufacturing output.  Bio-based systems were discussed, but the first product used by Sonntag was Sicomin’s SR1280 laminating system which delivered immediate results, enabling shorter cure cycles, and exceeding all of the previous mechanical test targets.

In 2020, Sonntag and Time Out Composite revisited the topic of a more sustainable epoxy resin system. It was the perfect time for Sonntag Fins, with their new unique bright green UV resistant outer finish, to go green on the inside too with Sicomin’s GreenPoxy® 33 resin.

Test fins were produced with the new material performing well in production trials. Pure resin samples were also tested and post-cured at 140 ̊C, with the new GreenPoxy® 33 samples showing significantly higher elongation at maximum resistance, meaning the cured epoxy was less brittle and susceptible to damage should a customer’s fin meet a rock. With mechanical properties improved, Sonntag switched production to GreenPoxy® 33 in August 2020.

Sonntag fins are manufactured in CNC machined aluminium moulds using GreenPoxy® 33 and a bespoke lay-up of woven, stitched biaxial and heat-set unidirectional carbon fibre fabrics in four steps:
• The first step in the moulding process is the application of Sonntag’s unique green in-mould coating.
• Next, the individual fabric plies, cut using precisely machined templates, are placed into the mould and then wet-out with the low viscosity epoxy. With the laminate stack complete, the mould is closed and loaded into a heated press for around 2 hours to consolidate and cure the fin.
• After curing, the demoulded fins are tempered in an oven at 140 ̊C, then only a light sanding is required to create the final surface roughness for optimum flow characteristics in the water.
• Finally, the fins are cut to the required length and the base adapter is molded to the epoxy-carbon blade in a specific mould.
With each fin being optimized for its rider, it is critical that each piece produced will bend and twist in exactly the way it has been designed to do so, providing the rider with exactly the feel and feedback they want for their board and fin. Each Sonntag fin is tested on a unique CNC controlled servo and stepper motor driven test bench that Joerg has developed, building a database of test results that not only ensures the products perform as designed but also validating the consistency of the manufacturing process and raw materials.
“We produce high-performance windsurfing fins that need to accommodate significant loads during sailing. Fins need to combine flexibility with extremely high torsion stiffness that places high interlaminar shear forces on the resin, especially in our softer fins.” commented Joerg Sonntag, MD, Sonntag Fins. “A key requirement for us is a resin that maintains its mechanical properties for many years, and this is where the Sicomin systems deliver”

For the AW 21/22 TINTEX presents its Raw Collection (c) Tintex
AW 21/22 Raw Collection by TINTEX Textiles
18.11.2020

For the AW 21/22 TINTEX presents its Raw Collection

  • An introspective and emotional journey of transformation
  • The global leading jersey manufacturer launches a brand-new collection deliberately “raw”, a back to matter, materials and origins as individuals that are able to change and evolve.
     

Another big step of TINTEX Naturally Advanced Evolution

TINTEX has over time established itself as a global leader in smart innovation with its high quality, natural based responsible jersey fabrics using the latest and best sustainable high-tech dyeing and finishing processes, implementing expertly controlled processing to drive material innovation and manufacture a full range of natural based smart materials, optimizing superior and responsible fashion solutions.

  • An introspective and emotional journey of transformation
  • The global leading jersey manufacturer launches a brand-new collection deliberately “raw”, a back to matter, materials and origins as individuals that are able to change and evolve.
     

Another big step of TINTEX Naturally Advanced Evolution

TINTEX has over time established itself as a global leader in smart innovation with its high quality, natural based responsible jersey fabrics using the latest and best sustainable high-tech dyeing and finishing processes, implementing expertly controlled processing to drive material innovation and manufacture a full range of natural based smart materials, optimizing superior and responsible fashion solutions.

The new collection confirms the Naturally Advanced Evolution vision as the right approach:  to work together in a deeper way - textile producers and fashion brands - to develop solutions, innovations with a strong environment-driven approach and cutting-edge technology able to offer contemporary consumer a brand new smart and performing choice.  As result, Raw is a true Naturally Advanced Evolution of the modern human being, explaining a story with no more genders and races, just focused on contemporary values.

The concept behind the AW 21/22 Raw Collection is turning back to nature and to our origins, a journey through emotional, spiritual and physical changes. Thinking about what’s happening around us as planet and individuals in an era of unpredictable challenges, we need to be creative reinventing us every day in different ways, aware of a new society and way of consuming where environment and human needs count.  A unique collection with three different approaches to mix together through a colour palette that goes from raw, dirty beige to a warm pinkish red and a false black-bluish gray.

fluidity, human, natural reconnection. An introspective journey where it’s all about ourselves and who we are. Through light and translucent fabrics, touches of peach and waxes in warm reds and burgundy, we find delicate, natural and extra light fabrics that flow on the skin to symbolically represent the inner fight from who we are and who we want to be. Organic cotton and Tencel™ Modal Micro processed in a special way, are at the center of this stage.
 
raw beauty, reuse, less is more. With this line, the company gives new life to existing articles, showing all the beauty of the raw material and the transformation they went through. This re-transformation of materials reflects the inner transformation; reborn of human beings, of time, of challenges through a new perspective where we reinvent ourselves, home, habits and planet. Our capability, skills to give new life to things it is not something we forgot through time. Organic cotton, Tencel™ Modal Micro, European hemp, Q-Nova® recycled polyamide and ROICA™ EF premium sustainable recycled stretch fiber are the materials boosting th experience.
 
timeless, versatile utility, urban. In a history of deep blues, with clean and dense touches, we come to acceptance, to a future where we relearn to live with what we already had. Organic cotton, Tencel™ Modal Micro and Texloop™ guarantee timeless performed articles, where the high-performance pairs to sustainable process especially at yarn level.

Freedom for ourselves, comfort, flexibility, movement are the concepts the company explores looking not only to sportswear market, but to all the markets where the most comfortable yet performing and responsible materials - from recycled synthetics to organic cotton - are the “right value choice”.

Moncler launches Grenoble collection with Dyneema® Composite Fabric (c) DSM Protective Materials
DSM Protective Materials DSMPMPR003b
11.11.2020

Moncler launches Grenoble collection with Dyneema® Composite Fabric

  • Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

  • Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

Sandro Mandrino, the Head of Design for Moncler Grenoble, was the first designer of the luxury fashion brand to incorporate Dyneema® into one of his creations through the Moncler Genius project. The Moncler Genius project advocates radical co-creation where multiple designers create their own signature collections in collaboration with the house. Together, these collections translate into one vision of the future and, as one of the nine designers, Mandrino’s interpretation of the future of fashion features Dyneema® Composite Fabric.

Using variations of the fabric in both white and black allowed Mandrino to bring his vision to life by merging skiwear, space suits and technology all in one. “ 3 Moncler Grenoble is first and foremost about performance,” states Mandrino, who integrated constructive solutions with fabric technology to develop a line that was meant to perform both on and off the ski slopes.

Dyneema®, the world’s strongest and lightest fiber, is 15 times stronger than steel yet light enough to float on water. The unmatched performance and protection of products made with Dyneema® have made it the material of choice in critical applications where failure is not an option for more than 30 years. In fabric form, Dyneema® is available in composites, denim, knits, wovens and hybrids for composite reinforcements. And because Dyneema® fabrics are made using Dyneema® fiber, they intrinsically provide high strength, low weight, waterproof and breathable properties – allowing designers to fuse the technical performance of ultra-light products with aesthetic design that doesn’t sacrifice strength or durability.

The Moncler team used the Grenoble collection as an opportunity to experiment and further understand the nature and behavior of Dyneema® fabrics, while simultaneously incorporating material performance with practical design. “Future collections will focus on expanding to new designs and fabric options in collaboration with DSM,” adds Mandrino.

“We are very excited to be working with the Moncler team to launch a collection of wonderful garments that allow people to explore the outdoors more safely and for longer periods of time,” states Marcio Manique, Global Business Director, Consumer & Professional Protection, DSM Protective Materials. “We look forward to further supporting Moncler as they develop innovative, high-tech garments that are also sustainably sourced through the introduction of bio-based Dyneema® fabrics.”

In line with DSM’s commitment to protect people and the environment they live in, the world’s first-ever bio-based ultra-high molecular weight polyethylene fiber was introduced in May 2020. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. DSM and Moncler’s continued partnership will not only provide high performance, light weight garments for outdoor enthusiasts but also environmentally sustainable alternatives that contribute to a more circular economy.

10.11.2020

Kornit Digital: Calvi implemented the Kornit Avalanche HD6 system

Kornit Digital announced Vizela, Portugal-based Calvi has implemented the Kornit Avalanche HD6 system for efficient, retail-quality digital decoration on demand.

Founded in 1977, Calvi is a textile manufacturing company that works with national and international partners to deliver sportswear and casual apparel for men, women, and children. Now occupying a 6,600-square-meter facility and employing a team of more than 120 qualified professionals, they are committed to the evolution of textiles with regard to three fundamental values: quality, availability, and efficiency. In addition to their own e-commerce operation, Calvi produces about 100,000 t-shirts per week for brands like Pull & Bear, Zara, and Bershka.

“When we first contacted Kornit, it was very easy to create the partnership we have now,” says Anselmo Pereira, Head of Design at Calvi. “Kornit Avalanche really helped us to move faster, to be more ecological—we basically don’t have minimum quantities to produce.

Kornit Digital announced Vizela, Portugal-based Calvi has implemented the Kornit Avalanche HD6 system for efficient, retail-quality digital decoration on demand.

Founded in 1977, Calvi is a textile manufacturing company that works with national and international partners to deliver sportswear and casual apparel for men, women, and children. Now occupying a 6,600-square-meter facility and employing a team of more than 120 qualified professionals, they are committed to the evolution of textiles with regard to three fundamental values: quality, availability, and efficiency. In addition to their own e-commerce operation, Calvi produces about 100,000 t-shirts per week for brands like Pull & Bear, Zara, and Bershka.

“When we first contacted Kornit, it was very easy to create the partnership we have now,” says Anselmo Pereira, Head of Design at Calvi. “Kornit Avalanche really helped us to move faster, to be more ecological—we basically don’t have minimum quantities to produce.

“This company started with my grandfather, and then my father started running the business by himself,” says Catarina Lopes, Founder and CEO of the brand’s eco-conscious NÜWA division. “I started NÜWA, which has two pillars: Everything is sustainable, and we are inspired by people. We are sustainable; we don’t have to create more water waste or use more resources. Our products are made from recycled cotton, recycled polyester, and organic cotton. We only use digital printing because it’s water inks; we don’t have to use chemicals in our products.”

Source:

pr4u / Kornit

05.11.2020

JEC SUMMIT SPORTS & HEALTH – CONNECT program unveiled

JEC SUMMIT SPORTS & HEALTH – CONNECT, the new online event platform devoted to medical and sports equipment composites manufacturers, unveils some of the programs available online December 8 to 10.

Starting on December 8, professionals from all the composites value chain across the globe will be able to meet online, network, and build long-lasting relationships thanks to the JEC Summit Sport & Health. The event goal is to allow decision-makers to learn about the current challenges and opportunities of the sports and medical fields, this thanks to the three-day program integrating industry sessions, workshops, startups, and business meetings.

JEC SUMMIT SPORTS & HEALTH – CONNECT, the new online event platform devoted to medical and sports equipment composites manufacturers, unveils some of the programs available online December 8 to 10.

Starting on December 8, professionals from all the composites value chain across the globe will be able to meet online, network, and build long-lasting relationships thanks to the JEC Summit Sport & Health. The event goal is to allow decision-makers to learn about the current challenges and opportunities of the sports and medical fields, this thanks to the three-day program integrating industry sessions, workshops, startups, and business meetings.

Each day, industry decision-makers using composites will come together to discuss the latest developments in composites in sports and medical fields through a set of keynotes and industry sessions. Each session will be followed by panel discussions over a variety of business-angled topics. Workshops from individual sponsors with clients will give an extensive overview of the current technological trends in the sports and medical fields and offer an outlook on developing production lines in these fields. A selection of the most exciting startups in these fields will pitch their innovations and glance at the industry's future. Finally, pre-arranged online business meetings will be set up to network with industry buyers and decision-makers from the entire composites' value-chain.

Each day of the summit will be composed of five major moments as-is:

  • A keynote speech led by one or two high profile experts
  • An industry session: a discussion between two experts in medical or sporting devices fields
  • A Startup pitches session during which each startup will introduce its product or innovation,
  • Workshops,
  • And Business meetings

 

Please see attached document for more information and dates.

Source:

JEC Group

New compression standard for sports and leisure garments © Hohenstein
The Hohenstein HOSYcan testing device can be used to determine the compression effect of textile materials.
02.11.2020

New compression standard for sports and leisure garments

  • In cooperation with partners, testing service provider Hohenstein has created the new DIN SPEC 4868, which will define the market standard and testing protocols for compression behaviour of sportswear.

Until now, there has been no uniform standard in the booming sports and leisure segment. Claims of textile compression properties could not be checked transparently and understandably. The DIN SPEC 4868 test method combined with the HOSYcan compression tester will enable objective comparison of products and materials and provide analytical performance data with regard to the desired properties.

Florian Girmond, the Hohenstein expert in charge of developing the new standard, is convinced of the opportunities it offers to the entire industry: "The objective and precise data obtained with HOSYcan will serve as the basis for innovative product development as well as for quality assurance and competitive comparisons.”

  • In cooperation with partners, testing service provider Hohenstein has created the new DIN SPEC 4868, which will define the market standard and testing protocols for compression behaviour of sportswear.

Until now, there has been no uniform standard in the booming sports and leisure segment. Claims of textile compression properties could not be checked transparently and understandably. The DIN SPEC 4868 test method combined with the HOSYcan compression tester will enable objective comparison of products and materials and provide analytical performance data with regard to the desired properties.

Florian Girmond, the Hohenstein expert in charge of developing the new standard, is convinced of the opportunities it offers to the entire industry: "The objective and precise data obtained with HOSYcan will serve as the basis for innovative product development as well as for quality assurance and competitive comparisons.”

In addition to the test scenarios defined in DIN SPEC 4868, HOSYcan can also be customised for special requirements and covers the entire range of products, from compression cuffs and socks to shapewear, for example, shirts, underwear and trousers.

Source:

Hohenstein