From the Sector

Reset
67 results
Céline Abecassis-Moedas (c) Lectra
Céline Abecassis-Moedas
04.05.2021

Céline Abecassis-Moedas joins Lectra’s Board of Directors

At Lectra’s Extraordinary Shareholders’ Meeting held on April 30, members voted to appoint Céline Abecassis-Moedas as a new independent director. Nominated for a period of four years, she becomes a member of the Audit Committee, the Compensation Committee and the Strategic Committee.

The appointment of Céline Abecassis-Moedas to Lectra's Board of Directors will notably strengthen the Strategic Committee, which will be called upon to examine an increasing number of investment projects in innovative companies and the continued development of our offers for Industry 4.0.

Céline Abecassis-Moedas will also draw upon her international experience as an independent director, through positions held for nearly ten years at four companies in Spain and Portugal: Europac (Papeles y Cartones de Europa) from 2012 to 2019, CTT (CTT Correios de Portugal) from 2016 to 2020, CUF since 2016, and Vista Alegre Atlantis since 2020.

At Lectra’s Extraordinary Shareholders’ Meeting held on April 30, members voted to appoint Céline Abecassis-Moedas as a new independent director. Nominated for a period of four years, she becomes a member of the Audit Committee, the Compensation Committee and the Strategic Committee.

The appointment of Céline Abecassis-Moedas to Lectra's Board of Directors will notably strengthen the Strategic Committee, which will be called upon to examine an increasing number of investment projects in innovative companies and the continued development of our offers for Industry 4.0.

Céline Abecassis-Moedas will also draw upon her international experience as an independent director, through positions held for nearly ten years at four companies in Spain and Portugal: Europac (Papeles y Cartones de Europa) from 2012 to 2019, CTT (CTT Correios de Portugal) from 2016 to 2020, CUF since 2016, and Vista Alegre Atlantis since 2020.

Céline Abecassis-Moedas, 49, is now Dean for Executive Education and Associate Professor at Católica-Lisbon. She began her career in research at France Telecom R&D, before joining Lectra in New York as an e-business product manager in 1999, then AT Kearney in London as a consultant in 2000. From 2002 to 2005, she was Lecturer in Strategy at Queen Mary University of London, then joined Católica-Lisbon University as Assistant Professor in Strategic and Innovation Management.

From 2014 to 2020, Céline Abecassis-Moedas was also Affiliate Professor at ESCP and co-scientific director of the Lectra-ESCP Chair's "Fashion and Technology".

Céline Abecassis-Moedas is a graduate of the École Normale Supérieure de Cachan, of the Université Paris Dauphine (DEA in Scientific management methods), holder of a Ph.D. in Management from the École Polytechnique and holder of the INSEAD Certificate in Corporate Governance obtained in 2017.

Source:

Lectra

17.03.2021

Kornit Digital: Printful will be adding more than 50 Kornit Atlas systems

Kornit Digital announced global on-demand printing and warehousing provider Printful will be adding more than 50 Kornit Atlas systems during 2021 for direct-to-garment (DTG) production on demand, representing a considerable expansion of their current production capabilities. This coincides with the print-on-demand leader’s addition of new production facilities in Los Angeles, Dallas, Charlotte, Mexico, Spain, and Canada, as well as expansion of existing facilities globally.

Printful has provided a consistent model of success for on-demand fulfillment to B2B and B2C customers in the e-commerce age.

Kornit Digital announced global on-demand printing and warehousing provider Printful will be adding more than 50 Kornit Atlas systems during 2021 for direct-to-garment (DTG) production on demand, representing a considerable expansion of their current production capabilities. This coincides with the print-on-demand leader’s addition of new production facilities in Los Angeles, Dallas, Charlotte, Mexico, Spain, and Canada, as well as expansion of existing facilities globally.

Printful has provided a consistent model of success for on-demand fulfillment to B2B and B2C customers in the e-commerce age.

“Consumers today want customization and personalization, social media engagement, responsible and eco-friendly business practices, and instant gratification—whether they’re buying, designing, or building their own personal brand,” said Davis Siksnans, Printful Co-Founder and CEO. “Kornit’s agile, versatile, efficient technologies power our success by answering those demands with ease, and their quality, reliability, and scalability are a key reason we’re now shipping more than a million finished pieces every month. By bringing our proven production capabilities to more corners of the globe, Printful will be positioned to meet and exceed the demands of today’s creative digital natives for years to come.”

Rafa's Textiles Grows On-Demand Production Business with Kornit Digital (c) Kornit Digital
23.02.2021

Rafa's Textiles Grows On-Demand Production Business with Kornit Digital

Kornit Digitala announced Valencia, Spain-based Rafa’s Textiles has acquired a third Kornit Avalanche HD6 system for single-step, on-demand direct-to-garment (DTG) digital production, spurred by business growth resulting from increased e-commerce engagement in the past year.

Rafa’s Textiles personalizes t-shirts and all kinds of clothing with screen printing, direct (digital) printing, silkscreen transfer, sublimation, and embroidery, serving European-based B2B clients who sell via web stores, both integrated with Amazon and independently. There are no colour limitations, and handfeel and durability are retail-quality. On a typical day, they will handle 200-300 print-on-demand orders, though those numbers spike with key holidays; this past Christmas, for example, saw a peak of 1,300 orders in a single day. Regardless of volume, with digital production capabilities in house, these orders are printed individually within 24 hours and shipped directly to all customers.

Kornit Digitala announced Valencia, Spain-based Rafa’s Textiles has acquired a third Kornit Avalanche HD6 system for single-step, on-demand direct-to-garment (DTG) digital production, spurred by business growth resulting from increased e-commerce engagement in the past year.

Rafa’s Textiles personalizes t-shirts and all kinds of clothing with screen printing, direct (digital) printing, silkscreen transfer, sublimation, and embroidery, serving European-based B2B clients who sell via web stores, both integrated with Amazon and independently. There are no colour limitations, and handfeel and durability are retail-quality. On a typical day, they will handle 200-300 print-on-demand orders, though those numbers spike with key holidays; this past Christmas, for example, saw a peak of 1,300 orders in a single day. Regardless of volume, with digital production capabilities in house, these orders are printed individually within 24 hours and shipped directly to all customers.

For Rafa’s Textiles, implementing Kornit’s digital production technology was simply the best means to meeting the challenges and capitalizing on new opportunities of the e-commerce age. Sergio attributes his business’s success despite recent market disruptions to their focus on e-commerce, which aligns with buyers’ increased preference for web-based purchasing.

High-Speed 4D Scanner now available at the ITM of TU Dresden © ITM/TU Dresden
Grand opening of the 4D scanner Move4D: System developers Daniel Gomez (right) and Carmen Gimeno (second f.t.r.) from IBV hand over the calibration scepter to Prof. Dr.-Ing. habil. Yordan Kyosev (middle), Head of the Chair of Assembly Technology for Textile Products, together with Prof. Dr.-Ing. habil. Chokri Cherif (second f.t.l.), Head of the ITM, and Prof. Dr.-Ing. habil. Sybille Krzywinski (left), Scientific Director of the chair
07.12.2020

High-Speed 4D Scanner now available at the ITM of TU Dresden

A Move4D scanner is the latest addition to the state-of-the-art CAE infrastructure at the Chair of Assembly Technology for Textile Products at the ITM – this comes as an early Christmas surprise that has been eagerly awaited by the researchers. The high-speed 4D scanner was developed at the IBV - Instituto de Biomecánica, Spain, and will be a valuable tool for future research projects involving interactions of humans and their clothing. Professor Yordan Kyosev, Head of the Chair of Assembly Technology for Textile Products, is just as excited as his team of researchers about the arrival of the new Move4D scanner. “By means of this scanner, we will be able to strengthen and extend our leading global position in digitalization and virtual product development for tight clothing in high-tech applications,” says Professor Kyosev who is looking forward to new co-operations in this promising field of research.

A Move4D scanner is the latest addition to the state-of-the-art CAE infrastructure at the Chair of Assembly Technology for Textile Products at the ITM – this comes as an early Christmas surprise that has been eagerly awaited by the researchers. The high-speed 4D scanner was developed at the IBV - Instituto de Biomecánica, Spain, and will be a valuable tool for future research projects involving interactions of humans and their clothing. Professor Yordan Kyosev, Head of the Chair of Assembly Technology for Textile Products, is just as excited as his team of researchers about the arrival of the new Move4D scanner. “By means of this scanner, we will be able to strengthen and extend our leading global position in digitalization and virtual product development for tight clothing in high-tech applications,” says Professor Kyosev who is looking forward to new co-operations in this promising field of research.

This high-speed scanner is able to capture an entire body with 180 Hz and a precision of < 1mm, thus guaranteeing the precise analysis of interactions between body and textile as well as deformation during motion. The Move4D can record and analyze dynamic processes at a very high speed. Hence, this device will enable researchers to make significant contributions towards enhanced functional (e.g. for the sports and medical sector) and protective clothing.

Together with three already available 3D scanners, this high-speed 4D scanner represents Dresden´s new „3D&4D Scan Lab“ at the Chair of Assembly Technology for Textile Products for the static and dynamic recording of small and medium-sized objects. Professor Kyosev and his team of 17 researchers are among the world´s leading R&D experts for clothing and technical products who will continue to expand their expertise in the field of material modelling for textile materials.


 

More information:
ITM TU Dresden 4D Scanner
Source:

© ITM/TU Dresden

Relanit 3.2 HS (c) Mayer & Cie
17.11.2020

Mayer & Cie. extends status in Turkey

In pandemic year 2020 circular knitting machine manufacturer Mayer & Cie. (MCT) has further improved its leading position in Turkey. So the country continues to be one of the company’s strongest and most consistent sales markets. Even in difficult years, the manufacturer and its longstanding Turkish representative Mayer Mümessillik have achieved positive results. The reasons for this year’s success, as Mayer & Cie. sees it, are the transfer of production to locations close to Europe, Turkey’s state-of-theart machinery and the increase in demand for comfortable clothing that is suitable as home office wear.

Turkish market is a growth market despite corona setback
“Compared to 2019, we anticipate a growth in the Turkish market even though the corona situation was a serious setback in the second quarter of 2020,” says Stefan Bühler, Mayer & Cie.’s regional sales manager for Turkey.

In pandemic year 2020 circular knitting machine manufacturer Mayer & Cie. (MCT) has further improved its leading position in Turkey. So the country continues to be one of the company’s strongest and most consistent sales markets. Even in difficult years, the manufacturer and its longstanding Turkish representative Mayer Mümessillik have achieved positive results. The reasons for this year’s success, as Mayer & Cie. sees it, are the transfer of production to locations close to Europe, Turkey’s state-of-theart machinery and the increase in demand for comfortable clothing that is suitable as home office wear.

Turkish market is a growth market despite corona setback
“Compared to 2019, we anticipate a growth in the Turkish market even though the corona situation was a serious setback in the second quarter of 2020,” says Stefan Bühler, Mayer & Cie.’s regional sales manager for Turkey.

Mayer & Cie. got off to a strong start on the Bosporus in the first quarter of 2020 with additional positive effects until mid-March. This was due to a desire for production locations close to Europe. In the second quarter, during the lockdown, demand largely ground to a halt. Government measures helped to cushion the downturn. Says Ahmet M. Öğretmen, general manager of MCT’s Turkish sales partner Mayer Mümessillik: “In the second quarter, GDP was down by about 10 percent, so we got off lightly.”

Since July 2020, orders for Mayer & Cie. circular knitting machines have bounced back again. Ahmet M. Öğretmen sees an interplay of reasons for this recovery. The main reason, he says, is the low exchange rate of the Turkish lira, which has boosted exports of ready-made textiles. The Turkish daily Hürriyet reports, with reference to the Turkish state news agency, 11 percent year-on-year growth in August 2020. The most important export markets, the newspaper says, are Germany, the UK and Spain. Between them, they account for around half of exports totalling € 1.27 billion.* “This demand must be fulfilled,” Öğretmen says. “That leads to investment in machinery by manufacturers.”

Relanit is synonymous with single jersey
The machines of choice for Turkish knitwear manufacturers are regularly Mayer & Cie. machines. The long-established German firm’s share of the Turkish market is substantially higher than in other markets. The manufacturer’s position is particularly strong in the market for plain single jersey fabrics, with the Relanit 3.2 HS being the machine of choice. It achieves an extraordinarily high level of productivity, especially in processing elastomer yarns. It also handles a wide range of yarns reliably.

“Interlock is Mayer & Cie.”
Mayer & Cie. is one of the leader in the second major circular knitting discipline, rib and interlock fabrics. The machines used for double jersey fabrics are the OV 3.2 QCe, the D4 2.2 II and the D4 3.2 II. The OV 3.2 QCe knits interlock, 8-lock structures, spacers and fine gauge with 3.2 systems. The D4 2.2 II is another stalwart for rib, 8-lock and interlock. The 8-lock D4 3.2 II is the machine of choice for firms that want to manufacture structures such as Piqué, Punto di Roma or Thermal in addition to interlock.

The MBF 3.2 is another top seller in Turkey. A three-thread fleece machine, it knits fabrics for sportsand leisurewear such as hoodies and is very much in keeping with the trend in home office year 2020. “Comfortable clothing is circular knitted,” says Ahmet M. Öğretmen, “and we benefit from that of course.”

One of the world’s most state-of-the-art machine parks are in Turkey
Another advantage is the modernity of the Turkish machine park, which is doubly attractive in view of Turkey’s weak currency. Says Mayer Mümessillik general manager Öğretmen: “In the past 10 to 20 years there has been very heavy investment in high-quality machines. As a consequence we have the world’s youngest and most up-to-date production facilities.” Combined with geographical proximity to the main export markets in Europe that should prove a growth driver in the years ahead – and keep demand for Mayer & Cie. machines brisk and high.

 

*More informationen here.

Source:

Mayer & Cie GmbH & Co. KG

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V

21.07.2020

ITM 2021: Accelerating the Textile Sector that Has Become Stationary Due to Pandemic

The ITM 2021 Exhibition, which is postponed to 22-26 June 2021 due to the coronavirus pandemic outbreak, will direct the world and Turkish textile industry, which will demonstrate a vigorous comeback in the post-pandemic period.

The ITM Exhibition, which was planned to be held between 2-6 June this year, was postponed to 22-26 June 2021 due to the troublesome Coronavirus pandemic. Participating companies in countries that had to interrupt their production, especially Italy, France, Spain, Germany and China, which were most affected by the virus, welcomed the postponement of the ITM Exhibition. The countries, holding similar opinions that it is not possible to save from the pandemic without effective drug treatment or vaccine against coronavirus, started normalization process by increasing their protective measures while fighting against the pandemic.

The ITM 2021 Exhibition, which is postponed to 22-26 June 2021 due to the coronavirus pandemic outbreak, will direct the world and Turkish textile industry, which will demonstrate a vigorous comeback in the post-pandemic period.

The ITM Exhibition, which was planned to be held between 2-6 June this year, was postponed to 22-26 June 2021 due to the troublesome Coronavirus pandemic. Participating companies in countries that had to interrupt their production, especially Italy, France, Spain, Germany and China, which were most affected by the virus, welcomed the postponement of the ITM Exhibition. The countries, holding similar opinions that it is not possible to save from the pandemic without effective drug treatment or vaccine against coronavirus, started normalization process by increasing their protective measures while fighting against the pandemic.

More information:
ITM textile machinery fair
Source:

ITM

25.02.2020

New haikure x ISKO responsible project

Clean, minimal and responsible, the collection perfectly embodies the combination of high-end looks with a sustainable vision, delivering effortless and stylish garments available in store from January 2020.

It claims to be love at first touch, and rightly so, as it celebrates women’s natural shape enhancing it with haikure’s delicate designs and ISKO™ premium denim. amae – the Italian brand’s latest collection and the latest chapter in the longstanding partnership between haikure and ISKO – is inspired by the idea of “taking care”.

Aiming at promoting the value of Responsible Innovation™, the collection delivers high-end contemporary looks resulting from the shared commitment to provide remarkable innovation while fostering a mindful approach in the fashion and denim industries.

Clean, minimal and responsible, the collection perfectly embodies the combination of high-end looks with a sustainable vision, delivering effortless and stylish garments available in store from January 2020.

It claims to be love at first touch, and rightly so, as it celebrates women’s natural shape enhancing it with haikure’s delicate designs and ISKO™ premium denim. amae – the Italian brand’s latest collection and the latest chapter in the longstanding partnership between haikure and ISKO – is inspired by the idea of “taking care”.

Aiming at promoting the value of Responsible Innovation™, the collection delivers high-end contemporary looks resulting from the shared commitment to provide remarkable innovation while fostering a mindful approach in the fashion and denim industries.

ISKO, pioneer of responsibility and the first denim mill in the world awarded both the prestigious EU Ecolabel and Nordic Swan Ecolabel, supported the project providing amae with responsible ingredients to shape its neat looks. Clean and minimal, the garments feature ISKO Pj Soft™ which, like a gentle embrace, grants the skin a silky touch and a soft feel. Responsibly produced according to ISKO’s holistic vision based on creativity, competence and citizenship, this light and soft fabric molds and moves with the wearer, providing an all-round flattering silhouette and comfortable fit that never feel restrictive.

As part of ISKO’s 25,000+ products, this textile concept also has a certified Environmental Product Declaration (EPD®s) for its Life Cycle Assessment (LCAs), ensuring a full transparency about its environmental impact by providing the water usage and carbon footprint of 1 square meter of fabric. As signatory member of ZDHC Foundation, ISKO also avoids harmful substances and hazardous chemicals in its entire production chain, resulting in safer denim that are good for both people and the planet.

Presenting three different washes – regular and stone wash, as well as dyed –, this fashionable and responsible collection will be available in Italy, Spain and Germany starting from January 2020.

More information:
haikure Isko
Source:

menabo

(c) Bangladesh Apparel Exchange (BAE)
12.11.2019

11th Bangladesh Denim Expo Ends Highlighting Responsibility

The 11th Bangladesh Denim Expo attracted 99 exhibitors from 11 countries and once again proved itself the most significant show of its kind in Bangladesh. In total there were 5,692 visitors – a remarkable achievement.

The great and good of this diverse industry once again descended on the expo which illustrated, once again, that the denim sector of Bangladesh is in rude health.

In this edition exhibitors displayed fabrics, garments, threads, machinery, finishing equipment and accessories, positioning the show as a true representation of Bangladesh’s denim industry - the second largest denim exporter to the EU and third largest to the United States. The expo also saw other participating countries including china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

Responsibility was the theme of the 11th Bangladesh Denim Expo. Founder and CEO Bangladesh Denim Expo Mostafiz Uddin said: “It is the duty of all stakeholders in the denim industry to acknowledge their responsibility and to analyse the business practices for the benefit of all.”

The 11th Bangladesh Denim Expo attracted 99 exhibitors from 11 countries and once again proved itself the most significant show of its kind in Bangladesh. In total there were 5,692 visitors – a remarkable achievement.

The great and good of this diverse industry once again descended on the expo which illustrated, once again, that the denim sector of Bangladesh is in rude health.

In this edition exhibitors displayed fabrics, garments, threads, machinery, finishing equipment and accessories, positioning the show as a true representation of Bangladesh’s denim industry - the second largest denim exporter to the EU and third largest to the United States. The expo also saw other participating countries including china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

Responsibility was the theme of the 11th Bangladesh Denim Expo. Founder and CEO Bangladesh Denim Expo Mostafiz Uddin said: “It is the duty of all stakeholders in the denim industry to acknowledge their responsibility and to analyse the business practices for the benefit of all.”

 Sustainability Takes Centre-stage At Leading Bangladesh Shows (c) Bangladesh Apparel Exchange
15.10.2019

Sustainability Takes Centre-stage At Leading Bangladesh Shows

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

  • Bangladesh’s biggest denim expo takes place 5-6 November
  • The show runs concurrently with the Sustainable Apparel Forum Bangladesh
  • From 4-6 November, Bangladesh becomes the perfect meeting point for stakeholders in the global apparel industry

DHAKA - Responsibility is the theme of the 11th Bangladesh Denim Expo which takes place on 5th and 6th November at International Convention City in Bashundhara, Dhaka. The event, now firmly established as one of the world’s leading denim trade shows, runs alongside the Bangladesh Sustainable Apparel Forum.

Bangladesh Denim Expo

Around 100 exhibitors from 11 countries, including host Bangladesh, will participate in this year’s denim expo. Other participating countries are china, Japan, Italy, India, Singapore, Brazil, Spain, Pakistan, Turkey and Germany.

H&M Group is collaborating with Bangladesh Denim Expo for the forthcoming 11th edition of the event and a number of guest speakers will be present from the company, including Pierre Borjesson, head of sustainability, global production. Other guest speakers include Andrew Olah, the founder of Kingpins Denim show, Alice Tonello, R&D director with the Tonello Group, world renowned denim designer, Piero Turk and Jordi Juani, Asia regional director with Jeanologia.

Through a series of product displays, presentations, seminar sessions & panel discussions, the Expo will encourage healthy debate and interaction among exhibitors and visitors to champion a more responsible denim industry. One of these, of course, is sustainability and within this sits the issue of responsibility – an overriding theme of this year’s event. Denim manufacture faces huge challenges with regards its social and environmental responsibility, with production techniques having potentially far-reaching ramifications for the environment as well as people involved in the production process.

However, the industry and its supply chain are making impressive progress on these issues with Bangladesh – now the world’s largest producer of denim – leading the way in terms of addressing some of the sustainability challenges relating to denim production, including excessive use of water and chemicals. Mostafiz Uddin is the organiser of Bangladesh Denim Expo. Uddin has watched with interest the evolution of the denim industry, with each Expo marking continued and gradual progress being made by the more progressive players in the industry.

Uddin says: “The way that business and product development is conducted can have far reaching consequences on the environment, on the people that make the product and the product’s end use & life-span. “It is the duty of all stakeholders in the apparel industry to acknowledge this responsibility and to analyse our business practices, for the benefit of all.” Emphasising the theme of responsibility within Denim Expo is the fact that revenues from the expo support the running and presentation of the Sustainable Apparel Forum.

Sustainable Apparel Forum

The Sustainable Apparel Forum (SAF) is the biggest annual sustainable apparel event in Bangladesh. Bangladesh Apparel Exchange (BAE) along with Bangladesh Garment Manufacturers and Exporters Association (BGMEA) as co-organiser will jointly carry out the 2nd edition of the SAF on 5th Nov 2019.

This is the second edition of the Sustainable Apparel Forum, with the first-ever forum held in 2017 in Dhaka. The objective of this year’s forum is accelerating the momentum of sustainability in Bangladesh apparel industry.

The forum will see more than 50 speakers gathered from Bangladesh and overseas sharing expert opinions across five panel discussions covering current issues in the country’s apparel industry. These include human resources, transparency in business, water conservation, purchasing practices, sustainable chemical management, waste management, circular economy in textiles and climate change to name a few.

Additionally, the conference will host several knowledge building technical presentations from renowned organisations which will cover different issues relating to sustainability, including waste management, protection of the environment and better working conditions.

Speakers at the show include Md. Shahriar Alam, MP, Honourable State Minister, Ministry of Foreign Affairs, Bangladesh, H. E. Benoit Préfonatine High Commissioner, High Commission of Canada, Bangladesh, and Dr. Rubana Huq President, Bangladesh Garment Manufacturers’ and Exporters’ Association, Sheikh Fazle Fahim, President, Federation of Bangladesh Chamber of Commerce & Industries, Pierre Börjesson, Head of Sustainability – Global Production, H&M Group, Tuomo Poutiainen, Country Director, International Labor Organization, Peter McCallister, Executive Director, Ethical Trading Initiative and H.E. Winnie Estrup Petersen Ambassador, Embassy of Denmark, Bangladesh.

Prior to this year’s conference, the Embassy of the Kingdom of the Netherlands in Bangladesh and the Sweden Embassy in Bangladesh will also co-host two roundtable discussion in collaboration with BAE and in association with BGMEA on 4 November, 2019, while H&M, Better Work Bangladesh and C&A Foundation are partners in the event.
The conference will be followed by showcasing different innovative, sustainable & best work practices in RMG manufacturing factories in Bangladesh. Following the discussions, a series of recommendations will be made, and a Sustainability Roadmap for the Bangladesh apparel industry will be formulated.

This year’s SAF promises to be the biggest yet. Added by Mr Mostafiz Uddin in the recent press briefing for the event: “The title for this year’s Sustainable Apparel Forum is enabling sustainability through policy and leadership. The time for talking on sustainability issues is over. It is now time for actions. That’s why the focus of this year’s show is on practical, pragmatic actions the textile industry can adopt to improve its environmental footprint.”

ROICA™ Infuses Eco-Smart Technology into High Performance Stretch at EUROBIKE © GB Network Marketing & Communication
04.09.2019

ROICA™ Infuses Eco-Smart Technology into High Performance Stretch at EUROBIKE

  • Committed To Making a Better World

EUROBIKE, the world’s leading trade fair for the cycling industry, will include ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers will discover ROICA™ premium stretch that provides comfort and movement as it energizes.

Spearheading the premium stretch market, ROICA™ partners’ materials elevate new standards for high-tech performance that can enhance cycling products to compete responsibly. ROICA™ partners excite you as they show a fantastic range of stretch essentials for cycling clothing, gear, and apparel that offer solid performance perks.

Most importantly, visit ROICA™ partners at EUROBIKE to learn about their ongoing commitment to responsible innovation and creativity by experiencing their advanced responsible developments made with the ROICA Eco-SmartTM Family.

The ROICA Eco-Smart™ family offers two responsible made yarns with outstanding stretch performances that give free rein to designers’ creativity and guarantees the highest quality while complying to the most-cutting edge sustainable standards.

  • Committed To Making a Better World

EUROBIKE, the world’s leading trade fair for the cycling industry, will include ROICA™ smart innovations into the race. Cycle retailers, brands and manufacturers will discover ROICA™ premium stretch that provides comfort and movement as it energizes.

Spearheading the premium stretch market, ROICA™ partners’ materials elevate new standards for high-tech performance that can enhance cycling products to compete responsibly. ROICA™ partners excite you as they show a fantastic range of stretch essentials for cycling clothing, gear, and apparel that offer solid performance perks.

Most importantly, visit ROICA™ partners at EUROBIKE to learn about their ongoing commitment to responsible innovation and creativity by experiencing their advanced responsible developments made with the ROICA Eco-SmartTM Family.

The ROICA Eco-Smart™ family offers two responsible made yarns with outstanding stretch performances that give free rein to designers’ creativity and guarantees the highest quality while complying to the most-cutting edge sustainable standards.

  • The ROICA™ EF– GRS (Global Recycled Standard) certified - is made with 58% of pre-consumer recycled content. GRS guarantees its sustainable mission with a certification by the influential Textile Exchange*, one of the most known and recognized global players in the market.
  • The ROICA™ V550   Indeed, it proudly breaks down without releasing harmful substance under the testing environment according to Hohenstein Environmental Compatibility certification. Made and engineered by Asahi Kasei R&D team, and produced in ROICA™ German plant only, the yarn offers additional and relevant circular economy advantages linked to material health as proved by a Gold Level Material Health Certificate by the Cradle to Cradle Product Innovation Institute for a safe and biological end of life cycle.

Witness ROICA™ partners as leaders in high-tech performance fabrics for the world of sports for riders that want to stand out. See, feel, imagine and learn why choosing ROICA™ is a winning decision. View the unbeatable collection of well-constructed fabric

  • M.I.T.I. SpA (IT), Hall/Stand No. A7-215 partner with ROICA™ since the very beginning, develops and creates from more than 85 years, innovative stretch warp knitted fabrics for high performance sports.
  • Payen – ESF (FR), Hall/Stand No. A7 / A7-219, committed to develop durable performant solutions chooses ROICA Resistance™ range of high-tech protection stretch functions.
  • Piave Maitex (IT), Hall/Stand No. A7-123 presents AGAIN, the new smart and technically advanced line able to balance performances and sustainable features, formed of highly performing jerseys. Two premium sustainable ingredients have been involved for the creation of AGAIN: Global Recycled Standard (GRS) owned by Textile Exchange - premium stretch fiber ROICA™ EF and perPETual high quality sustainable polyester born from a cost-effective process that reverses engineer consumer waste PET bottles.
  • SITIP SpA (IT), Hall/Stand No. A7-213 creates high-tech innovative sports fabrics that are made in Italy including BeHot fabric constructed with ROICA™, providing a new dimension to active performance.
  • Sportwear Argentona S.A. (ES) Hall/Stand No. A7-322 based in Spain, these leaders in high-tech tech, optimal performance sports fabrics create specialized structures for all facets of sports including high comfort, elastic and performance.
Source:

GB Network Marketing & Communication

Archroma: New Formaldehyde-Free* Low Temperature Curing Binder © Archroma
Screen capture of Archroma’s video on Archroma's Cool Print system based on the new Helizarin® LTC New, a formaldehyde-free* low temperature curing liquid binder for pigment printing on all kinds of fibers.
22.07.2019

Archroma: New Formaldehyde-Free* Low Temperature Curing Binder

  • For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

  • For Soft Vibrant And Durable Pigment Prints

Reinach, Switzerland - Archroma, a global leader in color and specialty chemicals towards sustainable solutions, has recently launched at the ITMA exhibition its new Helizarin® LTC New liq, a formaldehyde-free* low temperature curing binder for pigment printing on all kinds of fibers.

Prints are increasingly popular in apparel and interior textiles, as they allow us to express ourselves through vibrant colors and patterns. Consumers are especially drawn to the soft touch of an elegantly printed fabric.

Creating soft and vibrant prints can however be challenging for textile manufacturers: Pigment printing is usually applied to the fabric with a binder that often contains formaldehyde, needs a high temperature for curing, and can make the fabric harsh to the touch.

That is why Archroma developed its new Helizarin® LTC New to allow textile manufacturers to address these challenges.

The innovation was developed in compliance with “The Archroma Way: safe, efficient, enhanced, it’s our nature”. The approach finds its origin in Archroma’s deep belief that it is possible to make the textile industry sustainable, economically and ecologically.

Helizarin® LTC New is a binder designed for low temperature curing or no curing. This allows to reduce the fixation temperature and time compared to conventional pigment printing processes. In addition, manufacturers will not experience the change of shades that sometimes occur with high temperature processes.

When using Helizarin® LTC New, textile manufacturers can therefore improve the productivity of their printing process and reduce their energy consumption.

Helizarin® LTC New is also a welcome solution for textile manufacturers who do not have curing equipment, since it offers similar to better fastness than commodity binders that have been treated through a full process, and excellent fastness on synthetic fibers such as polyester and polyamide.

When it comes to the final result on the fabric, Helizarin® LTC New allows the creation of soft and durable prints for premium quality articles.

The new product will be the core of Archroma's Cool Print, a complete formaldehyde-free* system that keeps printed textiles soft and durable, and the planet cooler.

The system, which combines Helizarin® LTC New with Luprintol® softening and fixing auxiliaries and Printofix® pigment preparations, allows manufacturers to realize potential savings of up to 30% in processing time, 45% in energy consumption and 44% CO2 emissions – compared to benchmark pigment printing.

Helizarin® LTC New, as well as the Cool Print system, is formaldehyde free* and registered under REACH. It can be used in line with the ZDHC & bluesign® requirements, is compliant with the Oeko-Tex Std 100 Class 1 standard for baby wear, and with the MRSL of the most major brands.

“Helizarin® LTC New was developed by Archroma’s R&D team together with experts at our Global Competence Center for Printing, based in Barcelona, Spain”, says Joaquin Femat, Head of Business Development for Printing, Brand & Performance Textile Specialties, at Archroma. “As The Archroma Way is based on Safe, Efficient and Enhanced as its three pillars, we designed an innovation that offers our customers a balanced combination of resource optimization, safe handling, and controlled effluent. Because it’s our nature!”
 

More information:
Archroma Helizarin Farben
Source:

EMG

(c) Monforts Textilmaschinen GmbH & Co. KG
12.07.2019

Monforts: Introduction of CYD multi-colour yarn dyeing system at ITMA 2019

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

A revolutionary new system for yarn dyeing based on the proven Econtrol® dyeing system for fabrics will be introduced by A. Monforts Textilmaschinen GmbH & Co. KG at ITMA 2019 in Barcelona, Spain, from June 20-26.

This latest CYD denim processing technology integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity.

“Denim finishing is a field in which Monforts has an undisputed lead and we have been working closely with our many partners in the key denim manufacturing countries of China, Bangladesh, India, Pakistan, Mexico and Brazil to develop new advanced solutions,” says Monforts Head of Denim Hans Gerhard Wroblowski. “The CYD system has been developed in response to a very strong market demand.”

IRO AB (c) IRO AB
12.07.2019

Perfect control of the weft at all times from IRO AB

Following significant investment in the R&D capabilities at its base in Ulricehamn, Sweden, IRO AB introduced a range of new Industry 4.0-ready weft yarn feeding and tension control innovations for weaving looms at the recent ITMA 2019 in Barcelona, Spain.

Following significant investment in the R&D capabilities at its base in Ulricehamn, Sweden, IRO AB introduced a range of new Industry 4.0-ready weft yarn feeding and tension control innovations for weaving looms at the recent ITMA 2019 in Barcelona, Spain.

More information:
IRO AB
Source:

AWOL Media

(c) IRO AB
05.07.2019

IRO AB: Zero twist for composite fabrics guaranteed

IRO AB, a member of the Vandewiele group, reports strong interest in its ZTF Zero Twist Feeder introduced at the recent ITMA 2019 in Barcelona, Spain, particularly from companies involved in the growing market of textile reinforcements for composites.

In the weaving of fibres such as carbon, glass and aramids, as well as thermoplastic tapes for highly-engineered composite fabrics, it is essential that there is no twist in the feed, which this new machine absolutely guarantees.

“The ZTF Zero Twist Feeder keeps the tape yarns or fibre tows constantly stretched to avoid the risks of any snarls or twisting,” explains Sales and Marketing Manager Pär Hedman. “During ITMA 2019 I spoke to many companies interested in this new machine, which will be supplied in bespoke versions specific to the individual needs of each customer and the intended end-use.”

IRO AB, a member of the Vandewiele group, reports strong interest in its ZTF Zero Twist Feeder introduced at the recent ITMA 2019 in Barcelona, Spain, particularly from companies involved in the growing market of textile reinforcements for composites.

In the weaving of fibres such as carbon, glass and aramids, as well as thermoplastic tapes for highly-engineered composite fabrics, it is essential that there is no twist in the feed, which this new machine absolutely guarantees.

“The ZTF Zero Twist Feeder keeps the tape yarns or fibre tows constantly stretched to avoid the risks of any snarls or twisting,” explains Sales and Marketing Manager Pär Hedman. “During ITMA 2019 I spoke to many companies interested in this new machine, which will be supplied in bespoke versions specific to the individual needs of each customer and the intended end-use.”

More information:
IRO AB Vandewiele ITMA 2019
Source:

TMAS by AWOL Media.

(c) Rieter
24.06.2019

Rieter Awarded Large Contract from Egypt

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

Dr. Klapper was very pleased at the formal signing of contracts: “We would like to thank our Egyptian business partners for the confidence they are placing in Rieter by awarding us this contract. Rieter has been the partner of choice of the Egyptian spinning industry for decades. We are delighted to be given the opportunity of making such an important contribution to the modernization of the Egyptian textile industry.”

Source:

Media Relations, Rieter Management AG

At ITMA 2019, Mimaki will collaborate with Dutch fashion designer Tessa Koops, printing her designs onto a variety of applications, including curtains, cushions, and wallpapers. (c) Mimaki Europe B.V.
At ITMA 2019, Mimaki will collaborate with Dutch fashion designer Tessa Koops, printing her designs onto a variety of applications, including curtains, cushions, and wallpapers.
28.05.2019

Mimaki: First Global Showing of New Hybrid Textile Printer at ITMA 2019

  • New textile printer delivers unparalleled flexibility and unprecedented application capabilities
  • Mimaki to showcase a wealth of technological breakthroughs and creative opportunities to drive digital print adoption in textiles

Mimaki Engineering, a leading manufacturer of inkjet printers and cutting systems, today announces that it will showcase its broad portfolio of cutting-edge digital print technologies at ITMA 2019 (20-26 June 2019, Fira de Barcelona, Spain). This will include the first global showing of a brand-new hybrid digital textile printer, uniquely featuring both direct-to-textile and direct-to-transfer print capabilities. Crucially, these features enable textile and garment manufacturers to achieve unparalleled flexibility and enhanced application opportunities for increased business growth.

To facilitate these benefits, the new Mimaki printer also allows multiple sets of inks to be loaded simultaneously, supporting increased fabric range versatility and maximum product variety.

  • New textile printer delivers unparalleled flexibility and unprecedented application capabilities
  • Mimaki to showcase a wealth of technological breakthroughs and creative opportunities to drive digital print adoption in textiles

Mimaki Engineering, a leading manufacturer of inkjet printers and cutting systems, today announces that it will showcase its broad portfolio of cutting-edge digital print technologies at ITMA 2019 (20-26 June 2019, Fira de Barcelona, Spain). This will include the first global showing of a brand-new hybrid digital textile printer, uniquely featuring both direct-to-textile and direct-to-transfer print capabilities. Crucially, these features enable textile and garment manufacturers to achieve unparalleled flexibility and enhanced application opportunities for increased business growth.

To facilitate these benefits, the new Mimaki printer also allows multiple sets of inks to be loaded simultaneously, supporting increased fabric range versatility and maximum product variety.

As the future of textile printing and for further production benefits, Mimaki will also give a sneak preview of its new and upcoming TA Job Controller software, specifically designed for textile production environments. For use on Mimaki’s successful, EDP-awarded Tiger Pro Series and Rimslow TR Series – and all Mimaki textile printers –, TA Job Controller enables users to connect one-on-one to the RIP and other devices, for an automated workflow from design to pre-print, print and post print processes.

 

More information:
Mimaki
Source:

Mimaki Europe B.V.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
21.05.2019

Monforts at ITMA 2019

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

Parts prediction
In addition, the digital twin system provides information on the individual wear parts of a system, such as, for example, converters or gears. “Operators and mill managers are informed by Smart Check sensors when maintenance or the replacement of key components will be required, well ahead of time,” explains Monforts Vice President Klaus A. Heinrichs. “Direct access to the integrated Monforts webshop allows users to instantly order such parts when they are needed, virtually preventing machine downtime.” On request, Monforts can also virtually monitor machine performance and pro-actively alert customers to the need for preventative action. In such cases, however, data is only ever called from the cloud by Monforts when customers have given their full consent, in the interests of data security. Data from Smart Check, for example, can even be used to analyse a system’s energy requirements, allowing machine operation to be optimised by tailoring production runs to the peaks and troughs of electricity costs.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

(c) HeiQ ChemTex Inc.
27.03.2019

Powered by HeiQ Smart Temp technology, BUFF® launches CoolNet UV+® for activated cooling

Swiss textile innovator HeiQ partners with BUFF® on their new CoolNet UV+® fabric to stay dry and feel cool. For 25 years, BUFF® has premiered and innovated the tubular headwear category. Headquartered in Spain, the company was founded to keep warm the founder’s neck and head during his crosscountry motorcycle rides. Today, BUFF® continues its heritage of quality and reliability of multifunctional headwear.

HeiQ Smart Temp is an intelligent thermoregulation technology. Cooling is activated by rising body temperature and deactivated once cooling is complete. HeiQ Smart Temp keeps the wearer cooler, dryer and more comfortable.
“HeiQ and BUFF® have a shared vision of quality and reliability in our products. With the new CoolNet UV+® fabric, we are pleased that our HeiQ Smart Temp technology will allow the consumer to Stay Dry and Feel Cool”, says Christian von Uthmann, HeiQ’s Chief Sales Officer.

Swiss textile innovator HeiQ partners with BUFF® on their new CoolNet UV+® fabric to stay dry and feel cool. For 25 years, BUFF® has premiered and innovated the tubular headwear category. Headquartered in Spain, the company was founded to keep warm the founder’s neck and head during his crosscountry motorcycle rides. Today, BUFF® continues its heritage of quality and reliability of multifunctional headwear.

HeiQ Smart Temp is an intelligent thermoregulation technology. Cooling is activated by rising body temperature and deactivated once cooling is complete. HeiQ Smart Temp keeps the wearer cooler, dryer and more comfortable.
“HeiQ and BUFF® have a shared vision of quality and reliability in our products. With the new CoolNet UV+® fabric, we are pleased that our HeiQ Smart Temp technology will allow the consumer to Stay Dry and Feel Cool”, says Christian von Uthmann, HeiQ’s Chief Sales Officer.

Just like the first product from BUFF® in 1991, the new CoolNet UV+® was developed to keep customers safe and cool from the sun’s dangerous UV rays. Today the fabric is a recycled performance polyester microfiber with HeiQ Smart Temp’s activated cooling technology to keep the wearer cool and comfortable. The fabric also includes UPF 50+ sun protection, offers a 4-way ULTRA stretch weave and is 100% seamless for the perfect fit.

More information:
HeiQ HeiQ Smart Temp
Source:

HeiQ ChemTex Inc.

14.11.2018

Oerlikon Manmade Fibers Segment at the OpenStack Summit in Berlin

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

Source:

Oerlikon Marketing, Corporate Communications & Public Affairs