From the Sector

• Patented technology with bluesign®, ECO PASSPORT, and Skin Friendly certification

Polyester sport and functional textiles treated with Sanitized® Odoractiv 10 are protected against “permastink”. Already a holder of the Swiss Technology Award, the Sanitized® Odoractiv 10 odor-management technology can now carry the bluesign® sustainability label, the Skin Friendly certification from the Hohenstein Institute and the ECO PASSPORT by OEKO-TEX® label. SANITIZED AG has been a bluesign® system partner for over 10 years.

An unwelcome odor can quickly develop in polyester sport and functional clothing, even if freshly washed. This is “permastink”. It’s a challenge to the textile industry as it generally reduces the attractiveness and market opportunities of sport and functional clothing made from polyester.

The patented, non-biocidal Sanitized® Odoractiv 10 technology provides specific solutions and sales arguments for the end products. It works in two ways: The odor-causing bacteria can’t stick to the textile surface and are washed out completely in a normal wash cycle. This is due to the anti-adhesive “coating” applied in the padding process. This effect has been proven in a test procedure developed in cooperation with EMPA (Swiss Federal Laboratories for Material Science and Technology). Secondly, the treatment has an adsorbing effect. The odors are “trapped” and repeatedly expelled during a normal wash cycle.

No binder, no nano
Another characteristic: The treatment with Sanitized® Odoractiv 10 doesn’t apply an additional binder system. As with all of our products, SANITZED AG uses no nano technology. The safety and tolerability have been confirmed by the Skin Friendly certification from the Hohenstein Institute and ECO PASSPORT by OEKO-TEX® label. These have now been joined by the bluesign® accreditation.

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

• Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
• Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
• Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
• Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
• Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.

Sanitized®Odoractiv 10 with patented, dual-action technology

SANITIZED AG presents a new unique dimension to odor-management for functional polyester textiles. The newly developed wash-resistant Sanitized®Odoractiv 10 has a dual-action effect: on the one hand it prevents the bacteria from docking on the textile, and on the other, it adsorbs odors whilst the garment is being worn. The underlying technology that has been further developed was awarded the Swiss Technology Award. Goodbye permastink!

Manufacturers of functional polyester textiles from all over the world face the same challenge: freshly washed garments develop an unpleasant odor even after a short wearing period. The cause of this undesirable effect is not the human perspiration itself, but the bacteria that break down the perspiration. This process of decomposition generates the characteristic sweet, pungent smell. Once the bacteria, or the odor molecules, have penetrated into the surface of the polyester textile, they remain there permanently. Machine wash cycles and special detergents will never completely eliminate them. The bacterial colonization produces a biofilm on the polyester, which not only causes unpleasant odors, but also has a negative impact on the properties of the material.

Surface modulation with anti-adhesive properties
This is exactly where the new, dual-action technology from SANITZED AG comes into play: the surface of the textile is "coated" with Sanitized®Odoractiv 10 in the padding process. This creates a protective film on the surface of the textile. The bacteria use this anti-adhesive protective film as the basis for latching onto the garment. The bacteria can therefore be completely washed out in a normal wash cycle, consequently preventing any biofilm from forming. An anti-adhesion test method was developed in cooperation with EMPA to prove this Wash Effect.

The second advantage: Sanitized®Odoractiv 10 has a high adsorbing effect. Odors are "trapped" and removed during a normal wash cycle. The new product is the result of a technology that has been further developed and was awarded the Swiss Technology Award. The odor adsorption is identified using GC-MS.

As the Product Manager at SANITIZED AG, Urs Zihlmann, succinctly puts it: "Sanitized®Odoractiv 10 marks the end of permastink in polyester textiles." Sanitized®Odoractiv 10 can be combined with other Sanitized®products, in particular with products based on zinc pyrithione. The treatment does not influence the feel of the final treated textile.

Wash-resistant, sustainable and still "no nano"
The odor-reducing function is clearly still going strong even after 50 wash cycles. This is even the case if garments are washed at 30°C, either by hand or in the machine, meaning consumers save on water and energy, not to mention that the piece of clothing will look great for longer.

As with all its other products, SANITZED AG does not use any nano technology. The Hohenstein Institute has awarded the company the rating Skin Friendly, the bluesign®registration is underway. The product also bears the label Eco Passport by OEKO-TEX®.

"The unique, dual Odor Control Function of Sanitized®Odoractiv 10 enjoys a unique position in the market and it furthermore fulfills two market requirements: the prevention of permastink and the minimization of odor intensity during wear. Almost all manufacturers of functional polyester textiles are confronted with this problem," commented Urs Zihlmann. "The new technology creates tangible added value for consumers. This is a competitive differentiating
advantage for global marketing."

As with all other products, the service provided by SANITIZED AG includes technological advice before and during production, in the definition of the verified efficacy and in the use of the Sanitized®Ingredient Brand for promotional purposes.

“These products reflect Archroma’s commitment to delivering responsible products and solutions, and underscore our key principle as a company that we continuously challenge the status quo in the deep belief that we can make our industry sustainable,” stated Miquel Vila, Head of Technical Service, Brand & Performance Textile Specialties, EMEA. At the booth, Archroma will highlight in particular the following solutions and innovations:

COLOR
Archroma will be displaying its Printofix TF high-performance pigment preparations for outdoor applications. These are mainly suited for synthetic fabrics that are specifically developed for sunshades, camping tents, umbrellas and industrial applications where other dyes cannot meet the very high requirements of light and weather fastness. Printofix TF pigment preparations are easy to handle and allow the creation of colors that can resist light, weather, ozone or heat.

FIRE PROTECTION
Archroma made a commitment back in 2011 to use only non-halogenated technologies for its global range of Pekoflam products. This range is ideally suited to help customers face today’s ecological challenges and fulfill ever stricter safety regulations, regardless of the application. The company’s non-halogenated portfolio includes select products that are assessed for compliance to labels such as GOTS or OEKO-TEX(1) Standard 100 and that are in line with today’s global requirements for industrial and consumer safety.

REPELLENCY & RELEASE
Archroma's innovative next-generation fluorochemical alternative is PFOA-free* C6 Nuva N supporting the switch away from long-chain fluorotelomer products that may contain PFOA (perfluorooctanoic acid). These products provide long-lasting and excellent repellency and release effects, are easy to handle and non-sensitive regarding compatibility with other finishing chemicals. They allow covering the full spectrum of repellency and release needs in technical textile applications.

They also can be combined with finishing specialties, such as Pekoflam fire retardants, Nuva N and Smartrepel release and repellence solutions, and Sanitized(2) antimicrobial products. These products allow for more sustainable, tailor-made coating solutions for applications such as technical textiles, automotive, nonwoven, personal protective equipment and sportswear. With its diverse selection of advanced, sustainable and customizable solutions, Archroma is ideally positioned as the system supplier of choice for textile mills and nonwoven manufacturers. As Miquel Vila puts it: “Visit us at Techtextil to learn more about products that offer cutting-edge functionality while also being safer and more environmentally friendly. It's our nature!”