From the Sector

Reset
302 results
13.09.2022

OEKO-TEX® Annual Report 2021/2022: Positive business development

  • Values from the past 30 years more relevant than ever and are reflected in recent growth

During its 30th anniversary, the international OEKO-TEX® Association is still seeing positive business development despite numerous global challenges. In total, OEKO-TEX® issued more than 36,000 certificates and labels in the past financial year – an increase of 14% compared to the previous year. The STeP by OEKO-TEX® facility certification recorded the strongest growth, almost doubling compared to 2020/2021. The number of labels and certificates issued increased from 31,696 to 36,084 between July 1st, 2021, and June 30th, 2022.

  • Values from the past 30 years more relevant than ever and are reflected in recent growth

During its 30th anniversary, the international OEKO-TEX® Association is still seeing positive business development despite numerous global challenges. In total, OEKO-TEX® issued more than 36,000 certificates and labels in the past financial year – an increase of 14% compared to the previous year. The STeP by OEKO-TEX® facility certification recorded the strongest growth, almost doubling compared to 2020/2021. The number of labels and certificates issued increased from 31,696 to 36,084 between July 1st, 2021, and June 30th, 2022.

"Since OEKO-TEX® was founded in 1992, our business practices have been aligned with our core values," says OEKO-TEX® Secretary General Georg Dieners. “Sustainability, trust and safety build upon each other and are the basis of transparent and sustainable action. We underpin responsible action with our independent scientific methods and are valued in the industry as an effective, solution-oriented partner.” In the past financial year, this was reflected in the new Impact Calculator, with which STeP by OEKO-TEX®-certified companies calculate their CO2 emissions and measure their water consumption to ultimately reduce both. For OEKO-TEX®, a sustainable future is inextricably linked to a transparent status quo. "By setting the highest standards and communicating them openly, we encourage companies and consumers to do the same," says Dieners.

To maintain trust and credibility, OEKO-TEX® includes external perspectives. The International Advisory Board reviews proposals of the OEKO-TEX® Working Groups and provides important impetus for continuous optimization of the standards. Additionally, a Public Stakeholder Consultation was conducted in March 2022 to gain comprehensive insights from all interest groups. These are now being integrated into the further development of the standards and services. The investments of the past financial year reflect how important quality assurance and product control are for the OEKO-TEX® Association: Almost 40% of the total expenditure flowed into these two items.

In the meantime, the basic business continues to progress successfully. The number of STANDARD 100 by OEKO-TEX® certificates issued in the 2021/2022 financial year exceeded 25,000 for the first time. More than 15,000 chemicals, colorants and auxiliaries were certified with ECO PASSPORT by OEKO-TEX®.

In autumn 2022, OEKO-TEX® will launch a certification to help companies comply with upcoming due diligence laws. With RESPONSIBLE BUSINESS by OEKO-TEX®, OEKO-TEX® is responding to the increasing global expectations of compliance with due diligence requirements in companies. The new standard is based on the EU proposal for due diligence, the German Due Diligence Act, which will come into force from 2023, and numerous other international legislative proposals.

Source:

Oeko-Tex GmbH

23.08.2022

Lenzing: Transition to green electricity in Indonesia

  • Gradual transformation of production capacities to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose

The Lenzing Group, provider of wood-based specialty fibers, is expanding its global clean electricity portfolio and transitioning its production site in Purwakarta to green electricity. The Indonesian subsidiary PT. South Pacific Viscose (SPV) has been using electricity generated solely from renewable sources since July this year, which will reduce its specific carbon emissions by 75,000 tonnes annually.

In 2019, Lenzing became the first fiber producer to set a target of halving its carbon emissions by 2030 and becoming climate neutral by 2050. This carbon reduction target has been recognized by the Science Based Targets Initiative. In Purwakarta, Lenzing is currently investing in the reduction of carbon emissions, as well as air and water emissions. Thanks to its EUR 100 million investment in this area, Lenzing is gradually transitioning its existing capacities for standard viscose to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose.

  • Gradual transformation of production capacities to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose

The Lenzing Group, provider of wood-based specialty fibers, is expanding its global clean electricity portfolio and transitioning its production site in Purwakarta to green electricity. The Indonesian subsidiary PT. South Pacific Viscose (SPV) has been using electricity generated solely from renewable sources since July this year, which will reduce its specific carbon emissions by 75,000 tonnes annually.

In 2019, Lenzing became the first fiber producer to set a target of halving its carbon emissions by 2030 and becoming climate neutral by 2050. This carbon reduction target has been recognized by the Science Based Targets Initiative. In Purwakarta, Lenzing is currently investing in the reduction of carbon emissions, as well as air and water emissions. Thanks to its EUR 100 million investment in this area, Lenzing is gradually transitioning its existing capacities for standard viscose to LENZING™ ECOVERO™ and VEOCEL™ branded specialty viscose.

“Demand for our wood-based, biodegradable specialty fibers is constantly rising. We see enormous growth potential, especially in Asia. The switch to green, renewable electricity marks a huge step forward in converting our Indonesian site into a specialty fiber supplier. This makes us better positioned to meet the growing demand for sustainably produced fibers,” comments Robert van de Kerkhof, Chief Commercial Officer for Fiber at Lenzing.


The company aims to generate more than 75 percent of its fiber revenue from the wood-based, biodegradable specialty fibers business under the TENCEL™, LENZING™ ECOVERO™ and VEOCEL™ brands by 2024. With the launch of the lyocell plant in Thailand in March 2022 and the investments in existing production sites in Indonesia and China, the share of specialty fibers in Lenzing’s fiber revenue is set to exceed the 75 percent target by a significant margin as early as 2023.

Source:

Lenzing AG

23.08.2022

imm cologne’s new story: Spring Edition in June 2023, no trade fair in January

For 2023, imm cologne is adapting its concept. The trade fair has been given a new schedule, which will see the international Interior Business Event host a new, one-off spring edition in 2023. The dates have been chosen in close consultation with its market partners.

“Today the imm cologne advisory board gave the concept proposed by Koelnmesse for the imm spring edition in June 2023 the green light unanimously. Our thanks go to the advisory board and in particular to the German industry, the retail sector and the purchasing associations for their support. This concept will ensure that imm cologne can take place again after a two-year break. The industry has given its backing to a strong interior design trade fair in Germany, the biggest market in Europe,” says Gerald Böse, Chief Executive Officer of Koelnmesse. “I firmly believe in face-to-face exchanges. In my view, they are immensely important for the industry’s development, especially in challenging times. The sector needs an in-person platform in Germany, an event with international appeal and a strong communication reach like imm cologne,” he adds.

For 2023, imm cologne is adapting its concept. The trade fair has been given a new schedule, which will see the international Interior Business Event host a new, one-off spring edition in 2023. The dates have been chosen in close consultation with its market partners.

“Today the imm cologne advisory board gave the concept proposed by Koelnmesse for the imm spring edition in June 2023 the green light unanimously. Our thanks go to the advisory board and in particular to the German industry, the retail sector and the purchasing associations for their support. This concept will ensure that imm cologne can take place again after a two-year break. The industry has given its backing to a strong interior design trade fair in Germany, the biggest market in Europe,” says Gerald Böse, Chief Executive Officer of Koelnmesse. “I firmly believe in face-to-face exchanges. In my view, they are immensely important for the industry’s development, especially in challenging times. The sector needs an in-person platform in Germany, an event with international appeal and a strong communication reach like imm cologne,” he adds.

imm cologne’s new story will take shape in two steps
The imm cologne team presented its vision for a new concept at the start of June 2022. The new story for imm cologne will unfold in two steps. The first step will be the imm spring edition from 4 to 7 June 2023. “The spring edition is synonymous with a new beginning. imm cologne wants to use it to motivate and to show how it is experimenting with new ideas and leaving well-trodden paths behind,” explains Oliver Frese, Chief Operating Officer of Koelnmesse. “What’s more, the event in June gives our partners planning certainty.”

Four-day with a trade audience focus
The cornerstones of the new concept are clear: The imm spring edition will take place over four days, running from Sunday to Wednesday, and will be geared towards trade visitors. End consumers will be able to visit the trade fair by invitation, giving the spring event a clear business focus. “It’s also our goal to create new participation formats in the market,” says Matthias Pollmann, Vice President Trade Fair Management at Koelnmesse. The kitchen segment will also be included in the imm 2023 spring edition. At the same time, the plan is to incorporate the city more closely into the spring edition as an event location.

Vision 2024+: imm cologne as the forum for future issues facing the industry
The second step will then follow in the summer of 2023. In close consultation with the industry and the associations involved in the event, the future dates for imm cologne and LivingKitchen will be set. The future vision for imm cologne conceives the interior event as more than just a key business platform. As a catalyst for the sector’s development, it addresses both industry and external issues of relevance to the imm cologne community.

More information:
imm cologne
Source:

Koelnmesse GmbH

(c) Freudenberg Performance Materials
23.08.2022

Freudenberg at Lineapelle with sustainable materials for leather goods

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

Freudenberg Performance Materials (Freudenberg) will be presenting Evolon® eco-friendly microfiber reinforcement material for leather goods that is manufactured in Europe with no solvent and no chemical binder at the Lineapelle international trade show for the leather industry. Another sustainability highlight is binder-free strobel material made from 100% recycled PET for the shoe industry. The company will also be showing a nonwoven crimping material that meets the increasing demands of manufacturers and consumers alike in the footwear market.

Evolon® contains 80% recycled PET. It is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria. In addition, shorter transport routes help to secure supply chains for players in the European leather goods industry.

The binder-free strobel material is made from 100% recycled PET. It is GRS-certified for reliable traceability. The GRS certification recognizes the share of recycled materials in the strobel material. This allows customers to calculate the total amount of recycled material in shoes. Moreover, the mono-component material itself is fully recyclable. In terms of performance, the material is lightweight and also demonstrates a high tensile strength.

Made from nonwoven fabric, the innovative crimping material optimally combines high permanent moldability and shape retention with flexibility and suppleness. This crimping material enables manufacturers to reduce their production costs, while consumers benefit from increased comfort. Compared to conventional knitted fabric-based crimping materials, the nonwoven crimping material offers multi-directional stretching properties, improved fitting, greater design freedom and reduced weight.

Source:

Freudenberg Performance Materials

Fashion Revolution
19.08.2022

Results of the FASHION TRANSPARENCY INDEX 2022

The world’s largest fashion brands and retailers must increase transparency to tackle the climate crisis and social inequality, according to the latest Fashion Transparency Index.

The seventh edition of the Fashion Transparency Index ranks 250 of the world’s largest fashion brands and retailers based on their public disclosure of human rights and environmental policies, practices, and impacts, across their operations and supply chains.

  • Brands achieved an average score of just 24%, with nearly a third of brands scoring less than 10%
  • The majority of brands (85%) do not disclose their annual production volumes despite mounting evidence of clothing waste around the world
  • Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage

The Index reveals insights into the most pressing issues facing the fashion industry, like:

The world’s largest fashion brands and retailers must increase transparency to tackle the climate crisis and social inequality, according to the latest Fashion Transparency Index.

The seventh edition of the Fashion Transparency Index ranks 250 of the world’s largest fashion brands and retailers based on their public disclosure of human rights and environmental policies, practices, and impacts, across their operations and supply chains.

  • Brands achieved an average score of just 24%, with nearly a third of brands scoring less than 10%
  • The majority of brands (85%) do not disclose their annual production volumes despite mounting evidence of clothing waste around the world
  • Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage

The Index reveals insights into the most pressing issues facing the fashion industry, like:

  • As new and proposed legislation focuses on greenwashing claims, almost half of major brands (45%) publish targets on sustainable materials yet only 37% provide information on what constitutes a sustainable material.
  • Only 24% of major brands disclose how they minimise the impacts of microfibres despite textiles being the largest source of microplastics in the ocean.
  • The vast majority of major brands and retailers (94%) do not disclose the number of workers in their supply chains who are paying recruitment fees. This paints an unclear picture of the risks of forced labour as workers may be getting into crippling debt to accept jobs paying poverty wages.
  • While many brands use their channels to talk about social justice, they need to go beyond lip service. Just 8% of brands publish their actions on racial and ethnic equality in their supply chains.

Despite these results, Fashion Revolution is encouraged by increasing supply chain transparency among many major brands, primarily with first-tier manufacturers where the final stage of production occurs, e.g. cutting, sewing, finishing and packing. Nine brands have disclosed their first-tier manufacturers for the first time this year. It is encouraging to see significant progress across market segments including luxury, sportswear, footwear and accessories and across different geographies.

Fashion Revolution’s co-founder and Global Operations Director Carry Somers says: “In 2016, only 5 out of 40 major brands (12.5%) disclosed their suppliers. Seven years later, 121 out of 250 major brands (48%) disclose their suppliers. This clearly demonstrates how the Index incentivises transparency but it also shows that brands really are listening to the millions of people around the world who keep asking them #WhoMadeMyClothes? Our power is in our persistence.”

More key findings from the Fashion Transparency Index 2022:

Progress on transparency in the global fashion industry is still too slow among 250 of the world’s largest fashion brands and retailers, with brands achieving an overall average score of just 24%, up 1% from last year
For another year, the initiative has seen major brands and retailers publicly disclose the most information about their policies, commitments and processes on human rights and environmental topics and significantly less about the results, outcomes and impacts of their efforts.

Most (85%) major brands still do not disclose their annual production volumes despite mounting evidence of overproduction and clothing waste
Thousands of tonnes of clothing waste are found globally. However, brands have disclosed more information about the circular solutions they are developing (28%) than on the actual volumes of pre- (10%) and post-production waste they produce (8%). Brands have sat by as waste importing countries foot the bill, resulting in serious human rights and environmental implications.

Just 11% of brands publish a responsible purchasing code of conduct indicating that most are still reluctant to disclose how their purchasing practices could be affecting suppliers and workers
Greater transparency on how brands interact with their suppliers ought to be a first step towards eliminating harmful practices and promoting fair purchasing practices. The poor performance on transparency in this vital area is a missed opportunity for brands to demonstrate they are serious about addressing the root causes of harmful working conditions, including the instances where they themselves are the key driver.

Despite the urgency of the climate crisis, less than a third of major brands disclose a decarbonisation target covering their entire supply chain which is verified by the Science-Based Targets Initiative
Many brands and retailers rely heavily on garment producing countries that are vulnerable to the impacts of the climate crisis, yet our research shows that only 29% of major brands and retailers publish a decarbonisation target covering their operations and supply chain which is verified by the Science Based Targets Initiative.

Only 11% of brands publish their supplier wastewater test results, despite the textile industry being a leading contributor to water pollution
The fashion industry is a major contributor to water pollution and one of the most water intensive industries on the planet. Only 11% of major brands publish their wastewater test result, and only 25% of brands disclose the process of conducting water-related risk assessments in their supply chain. Transparency on wastewater test results is key to ensuring that brands are held accountable for their potentially devastating impacts on local biodiversity, garment workers and their communities.

Most major brands and retailers (96%) do not publish the number of workers in their supply chain paid a living wage nor do they disclose if they isolate labour costs
Insufficient progress is being made by most brands towards ensuring that the workers in their supply chain are paid enough to cover their basic needs and put aside some discretionary income. Just 27% of brands disclose their approach to achieving living wages for supply chain workers and 96% do not publish the number of workers in their supply chain paid a living wage. In response, we have joined forces with allies across civil society to launch Good Clothes, Fair Pay. The campaign demands groundbreaking living wage legislation across the garment, textile and footwear sector.

 

Source:

Fashion Revolution

(c) Riri Group
28.07.2022

Riri Group acquires powder metallurgy expert K4Sint

In recent years, Riri Group has embarked on a process of vertical expansion aimed at broadening its product range and in-house processing, in order to provide the market with a superior quality product thanks to the variety of its services and technologies. With the acquisition of K4Sint (Knowledge for Sintering) this process has taken another step forward and the Group consolidates its position as ‘one-stop shop supplier’ under the sign of integration, design capacity, customised offer, and innovative technologies.

In recent years, Riri Group has embarked on a process of vertical expansion aimed at broadening its product range and in-house processing, in order to provide the market with a superior quality product thanks to the variety of its services and technologies. With the acquisition of K4Sint (Knowledge for Sintering) this process has taken another step forward and the Group consolidates its position as ‘one-stop shop supplier’ under the sign of integration, design capacity, customised offer, and innovative technologies.

K4Sint, founded by two Ph.D. materials engineers,  brings to the Swiss Group its experience in Press and Sintering, Metal Injection Molding, Spark Plasma Sintering (Titanium, Aluminum, MMC, Advanced Ceramic). Riri, therefore, integrates within its Group a company capable of developing and producing components, accessories and semi-finished products for internal use but also for customers and companies not only limited to the fashion business: K4Sint will become the go-to facility and production site for steel MIM processes of the entire group. The new unit will also be able to perform metallographic tests, innovative materials development projects and in-depth technological consultancy work for Riri’s customers.

More information:
Riri Group K4Sint acquisition
Source:

Riri Group / Menabò Group

(c) Enapter
06.07.2022

Fraunhofer UMSICHT: Start for Life Cycle Impact Zero Project

The electrolyser producer Enapter has set itself the goal of developing its entire production process to run without negative impacts on the environment. As an important step on this journey, it is building the Enapter Campus production facility, which will be powered entirely from renewable energy produced on-site and in the neighbouring Bioenergiepark. The site in in Saerbeck, North Rhine-Westphalia combines electrolyser production, an R&D building, administration and office space, as well as a cantine over 82,000 square metres. Now the company wants to investigate what other measures can be implemented to achieve its “Life Cycle Impact Zero” aspirations – together with researchers from Fraunhofer UMSICHT, the Wuppertal Institute and the Institute of Sustainable Nutrition (iSuN) of FH Münster.

The electrolyser producer Enapter has set itself the goal of developing its entire production process to run without negative impacts on the environment. As an important step on this journey, it is building the Enapter Campus production facility, which will be powered entirely from renewable energy produced on-site and in the neighbouring Bioenergiepark. The site in in Saerbeck, North Rhine-Westphalia combines electrolyser production, an R&D building, administration and office space, as well as a cantine over 82,000 square metres. Now the company wants to investigate what other measures can be implemented to achieve its “Life Cycle Impact Zero” aspirations – together with researchers from Fraunhofer UMSICHT, the Wuppertal Institute and the Institute of Sustainable Nutrition (iSuN) of FH Münster.

With the Life Cycle Impact Zero project, started on April 15, 2022, the parties want to develop and apply an especially comprehensive and holistic approach to environmental assessment. This includes chemical manufacturing and electrolyser production, as well as matters like the use of energy and water resources, the generation of waste or the human factor in general. This is intended to cover all interactions between business and people. That includes, in particular, Enapter’s employees, but also people in upstream and downstream value chains, users of the technology or residents close to the production site. A concept for sustainable employee catering is also being developed.

The basis for all environmental assessment that will be carried out is ISO 14040. The recognised international standard divides the research into four phases: Aim and scope of the study, inventory analaysis, impact assessment, as well as interpretation. Sensitivity analyses and scenario techniques are also used as further methods.

On the basis of these analyses, the 18-month project should derive concrete measures to avoid negative environmental impacts completely, if possible, for example in production, employee mobility or in energy supply. Furthermore, it will examine whether these measures are transferable to Enapter’s other locations – such as in Italy. Following on from the project, the steps defined should be implemented by Enapter in the next phase. In the subsequent Phase 3, a renewed analysis is planned. This will determine if the technological innovations achieved by then in the production and use of Enapter’s electrolysers can enable additional ecological improvements.

The Life Cycle Impact Zero project is supported by the State of NRW.

Source:

Fraunhofer UMSICHT

06.07.2022

DOMO Chemicals und Hynamics: Production of polyamides from low-carbon hydrogen

DOMO Chemicals, a producer of engineered polyamide materials, and Hynamics, a 100% subsidiary of EDF Group specializing in the production of low-carbon hydrogen, have entered into a partnership project with the objective of achieving zero-carbon for 100% of the hydrogen used at the Belle-Étoile industrial site, in Saint-Fons (south of Lyon, France), in the heart of the French Vallée de la Chimie (“Chemistry Valley”).

For the first time in France, the “HyDom” project will enable the installation of an 85-megawatt (MW) hydrogen production plant using the water electrolysis process at the Belle-Étoile site, with a production capacity of 11,000 metric tons of low-carbon hydrogen per year. The plant will be powered by the French low-carbon electric power mix. By 2027, it will supply 100% of the annual production of hexamethylene diamine, a key component used in the production of plastics.

DOMO Chemicals, a producer of engineered polyamide materials, and Hynamics, a 100% subsidiary of EDF Group specializing in the production of low-carbon hydrogen, have entered into a partnership project with the objective of achieving zero-carbon for 100% of the hydrogen used at the Belle-Étoile industrial site, in Saint-Fons (south of Lyon, France), in the heart of the French Vallée de la Chimie (“Chemistry Valley”).

For the first time in France, the “HyDom” project will enable the installation of an 85-megawatt (MW) hydrogen production plant using the water electrolysis process at the Belle-Étoile site, with a production capacity of 11,000 metric tons of low-carbon hydrogen per year. The plant will be powered by the French low-carbon electric power mix. By 2027, it will supply 100% of the annual production of hexamethylene diamine, a key component used in the production of plastics.

The project will eventually prevent the emission of 84 kilotons of carbon dioxide (CO2) each year. Hexamethylene diamine, and ultimately, durable and low-carbon polyamides, will be used in various applications in major industry sectors, such as automotive, electronics, and heating & cooling.
This project is a major step towards the decarbonization of industrial sites that use grey hydrogen (produced from fossil fuels). The location in the Vallée de la Chimie within the vicinity of major transport routes opens up opportunities for the creation of a more complete hydrogen ecosystem.

The first phase of the project will consist of building up and ascertaining technical concepts and integrating the low-carbon hydrogen production plant within the larger production process of hexamethylene diamine.

Considering the high-power scale of the future electrolytic hydrogen production facility, the HyDom project is being developed in close collaboration with RTE (an organization in charge of managing the French power grid), to solve connection issues. As a priority project for the industry's zero-carbon strategy and for the “France 2030” investment plan, HyDom is supported by the French government and has been presented to the European Commission for public funding.

Source:

DOMO Chemicals / Marketing Solutions NV

05.07.2022

Stahl: Reduction of Scope 3 upstream emissions by at least 25%

Stahl, a proponent of responsible chemistry, is submitting a greenhouse gas (GHG) emissions reduction target that is aligned with the most recent guidance provided by the Science Based Targets initiative (SBTi). The new target marks a key milestone on the company’s journey toward carbon neutrality.

Stahl’s SBTi submission includes a specific commitment regarding the company’s Scope 3 upstream emissions, which Stahl aims to reduce by at least 25% over the next 10 years, compared with the base year (2021). This reduction would primarily be achieved by Stahl replacing its fossil-based raw materials with lower-carbon alternatives. The target is a major step towards the objective of limiting global warming temperature increase to 1.5°C above pre-industrial levels by 2050, as agreed at the 2015 Paris Climate Accords.
 
Stahl’s extended commitment builds on the company’s existing targets to reduce its emission for Scopes 1 and 2, which were set shortly after the Paris Agreement in 2015. Stahl has since reduced its Scope 1 and 2 (direct) GHG emissions by more than 30%, thanks to operational efficiency gains and by decarbonizing its energy supply.

Stahl, a proponent of responsible chemistry, is submitting a greenhouse gas (GHG) emissions reduction target that is aligned with the most recent guidance provided by the Science Based Targets initiative (SBTi). The new target marks a key milestone on the company’s journey toward carbon neutrality.

Stahl’s SBTi submission includes a specific commitment regarding the company’s Scope 3 upstream emissions, which Stahl aims to reduce by at least 25% over the next 10 years, compared with the base year (2021). This reduction would primarily be achieved by Stahl replacing its fossil-based raw materials with lower-carbon alternatives. The target is a major step towards the objective of limiting global warming temperature increase to 1.5°C above pre-industrial levels by 2050, as agreed at the 2015 Paris Climate Accords.
 
Stahl’s extended commitment builds on the company’s existing targets to reduce its emission for Scopes 1 and 2, which were set shortly after the Paris Agreement in 2015. Stahl has since reduced its Scope 1 and 2 (direct) GHG emissions by more than 30%, thanks to operational efficiency gains and by decarbonizing its energy supply.

Scope 3 GHG emissions cover all the additional indirect emissions that can occur in the value chain, including those associated with purchased raw materials, packaging, business travel, and transportation. Stahl’s Scope 3 emissions currently represent over 90% of its carbon footprint.

Source:

Stahl Holdings B.V.

(c) Borealis
28.06.2022

Borealis introduces portfolio of circular base chemicals

  • The Borvida™ portfolio introduces sustainable base chemicals to Borealis’ range of product offering
  • The range will initially be based on non-food waste biomass, and chemically-recycled waste; in the future it will also draw from atmospheric carbon capture
  • The traceability of the content will be based on Mass Balance, which is ISCC PLUS certified
  • This is the next step in an ambitious sustainability journey, which will see Borealis move away from traditional fossil-based feed

Borealis is strengthening its EverMinds™ circular product offering with Borvida™, a range of sustainable base chemicals.

The Borvida portfolio will offer base chemicals or cracker products (such as ethylene, propylene, butene and phenol) with ISCC Plus-certified sustainable content from Borealis sites in Finland, Sweden and Belgium. The move is part of Borealis’ broader commitment to a Future-Positive Revolution, in which the unrivalled benefits of base chemicals and polymers can be enjoyed at minimal impact to the planet.   

  • The Borvida™ portfolio introduces sustainable base chemicals to Borealis’ range of product offering
  • The range will initially be based on non-food waste biomass, and chemically-recycled waste; in the future it will also draw from atmospheric carbon capture
  • The traceability of the content will be based on Mass Balance, which is ISCC PLUS certified
  • This is the next step in an ambitious sustainability journey, which will see Borealis move away from traditional fossil-based feed

Borealis is strengthening its EverMinds™ circular product offering with Borvida™, a range of sustainable base chemicals.

The Borvida portfolio will offer base chemicals or cracker products (such as ethylene, propylene, butene and phenol) with ISCC Plus-certified sustainable content from Borealis sites in Finland, Sweden and Belgium. The move is part of Borealis’ broader commitment to a Future-Positive Revolution, in which the unrivalled benefits of base chemicals and polymers can be enjoyed at minimal impact to the planet.   

The portfolio will initially comprise Borvida B, from non-food waste biomass, and Borvida C, from chemically-recycled waste. In the future, the range will evolve to include Borvida A, sourced from atmospheric carbon capture. Borvida is complementary and is the building block to Bornewables™, a portfolio of polyolefins based on renewably-sourced second generation feedstocks, and Borcycle™, which offers circular polyolefins produced from mechanically- and chemically-recycled plastic waste.

Borealis produces a wide range of base chemicals for use in numerous industries based on various feedstock, such as naphtha, butane, propane and ethane. Through its olefin units (steam cracker and propane dehydrogenation), it converts these into the building blocks of the chemical industry: ethylene, propylene and C4 hydrocarbons (butylenes, ethyl tertiary-butyl ether (ETBE) and butadiene), and C5-6 hydrocarbons (pygas, phenol) among others.

The basis of the Borvida portfolio is Mass Balance, a Chain of Custody model that enables sustainable content to be tracked, traced, and verified through the entire value chain, offering sustainability-assured products from feedstock to end product. Using this model, circular alternatives can be offered in a cost-effective and environmentally-conscious way, which can be scaled up quickly without compromising on quality or efficiency.

Borvida can be used for a wide range of different polymer and chemical applications, also beyond polyolefins (PO). Non-PO polymers, such as polycarbonates, acrylonitrile butadiene styrene (ABS), super absorbant polymer (SAP) and other chemicals, are utilised for various end applications including coatings, plasticizers, adhesives, automotive, electronics, lubricants, detergents, appliances and sports equipment.

Together with key strategic partners, including Neste and Covestro, Borealis strives to provide a long-term solution in order to allow value-chain partners to meet their sustainability goals. Borvida will enable our customers to increase the sustainability of their products, keeping them ahead of forthcoming legislative changes, and meeting their customers’ demands for climate-conscious products.

Introduced on a smaller scale in early 2020, early renewable base chemicals customers include Covestro. “The use of alternative sustainable raw materials is one important pillar of our strategic ambition to become fully circular”, comments Frank Dörner, Managing Director Covestro Procurement Services GmbH & Co. KG. “The new product line is a good example for joint solutions, another strategic pillar, in order to establish new and reliable supply chains creating benefits for our customers.”

Source:

Borealis

27.06.2022

Transforming textile waste into feedstock

Europe has a 7-7.5-million-ton waste problem, of which only 30-35% is collected today. The ReHubs initiative launched in 2020 has now completed a Techno Economic Master Study (TES) and it sheds light on key figures and options to collaborate to solve the European waste problem.

In two and a half year all EU member states are obliged to separately collect textile waste. Currently there are no large-scaled plans to use that waste.  The largest portion of the waste (around 85%) comes from households.

Europe has a 7-7.5-million-ton waste problem, of which only 30-35% is collected today. The ReHubs initiative launched in 2020 has now completed a Techno Economic Master Study (TES) and it sheds light on key figures and options to collaborate to solve the European waste problem.

In two and a half year all EU member states are obliged to separately collect textile waste. Currently there are no large-scaled plans to use that waste.  The largest portion of the waste (around 85%) comes from households.

The ReHubs initiative brings together key European and world players to solve the textile waste problem by transforming “waste” into a resource and to boost textile circular business models at large scale. The completed TES has accessed critical information on solving the European waste problem. It is estimated that to reach a collection rate from 18 to 26 percent by 2030, 7 billion euro will be needed. Once matured and scaled, the textile recycling industry could become a profitable industry with a total market size of 6-8 billion € and around 15,000 direct new jobs by 2030. As a first step the ReHubs Initiative announces different actions forwards, including projects on this pathway, which one is to transform textile waste into feedstock.

TEXAID has been supporting ReHubs since the start and contributed significantly involved to the Business Council and the Steering Committee of the initiative. As strongly committed industry leader TEXAID is taking the lead on the project to transform textile waste into feedstock for recycling processes. In order to handle the increasing quantities of post-consumer textile waste a massive scale up of sorting and preparation for recycling of used textiles is needed. TEXAID is committed to lead the work on developing new technologies and building up additional capacities for the handling and preparing of textile waste for textile recycling in Europe. In a first phase this involves the built up of a new sorting and pre-processing facility with the capacity of 50’00 tons p.a. by 2024.

More information:
ReHubs Texaid
Source:

TEXAID

23.06.2022

Lectra announces the launch of its Automotive Cutting Room 4.0 offer

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 

The automotive industry currently faces a complex set of market dynamics: rising material and transport costs, reduced budgets, changing consumer expectations, increasing challenges related to CSR, etc. In this context, improving efficiency across the whole value chain has become a strategic priority for vehicle and equipment manufacturers. Lectra supports its customers by designing and developing cutting-edge solutions that combine software, equipment, data and services to make its offer the gateway to Industry 4.0.
 
With Industry 4.0, a new range of possibilities is opening up to businesses. The concept and its technologies bring in new value creation and cost control models based on synchronized, flexible and fast processes.
 
The Automotive Cutting Room 4.0 offer is a set of solutions connected to one other: Vector, the fabric cutting equipment offering the best performance in the market; Empower, a new generation of digital services to leverage Vector's capabilities; Valia, the heart of the new offer, a software for preparing and scheduling production; and Algopex, an application for exploiting and capitalizing on all the data generated by the cutting room, so you can make the best decisions as quickly as possible.
 
Connecting up all the elements of the Automotive Cutting Room 4.0 offer delivers this unprecedented value and enables an unparalleled level of performance to be achieved. Nicolas Favreau, Lectra’s Automotive Marketing Strategy Director, explains: “When the whole cutting room process is digitalized, the data generated are centralized and accessible in real time, helping our customers to make the best decisions at every step of the production process. The benefits are huge. For example, the key performance indicators from the offer’s first users show productivity gains of around 5% and a reduction in material consumption of nearly 2%. That’s unheard of! These results, combined with the agility that the Automotive Cutting Room 4.0 brings and the complete process control, demonstrate the offer’s maximum relevance.”

Source:

Lectra 

(c) Freudenberg Performance Materials Holding SE & Co. KG
21.06.2022

Freudenberg endorses further products with ECO-CHECK label

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Freudenberg Performance Materials (Freudenberg) is endorsing further sustainable products with its ECO-CHECK label introduced last year. These products comply with various environmental criteria. With immediate effect, five more solutions bear the label making the company’s commitment to sustainability visible.

Leather goods
The newly-endorsed ECO-CHECK products include one Evolon® microfilament textile application. This is a reinforcement material for leather goods that is manufactured with no solvent and no binder. It contains up to 80 percent recycled PET and is suitable for a broad range of applications. The material is produced at Freudenberg’s facility in Colmar, France, where the manufacturing process is highly sustainable: it is certified to STeP by OEKO-TEX® and fully complies with the DETOX TO ZERO by OEKO-TEX® criteria.

Healthcare applications
In the field of healthcare, the bio-based M 1714 wound pad with superior absorption for more challenging wounds has now been endorsed with the ECO-CHECK label. The dressing consists of a mix of bio-based fibers derived from natural sources and exhibits a smooth wound contact layer. The product has been evaluated for industrial compostability and conforms to ISO 13432.

Architectural applications
The sustainable TF 400 Eco F mesh fabric for textile architecture from Mehler Texnologies® now also bears the ECO-CHECK label. Its yarn is made of 100% recycled PET bottles and its characteristics are very similar to those of conventional mesh fabrics. In 2021, it was awarded first place by the Architectural Membrane Association (AMA) in the “product” category in recognition of its properties.

Shoes
In the shoe industry, the binder-free strobel insoles have been endorsed as particularly sustainable. They contain a high percentage of recycled green bottle flakes. Moreover, the insoles themselves are fully recyclable.

Filtration applications
The two layered, needle-punched nonwoven filter medium that has just been endorsed with the ECO-CHECK label has impressive sustainability characteristics. Made entirely of polyester, more than half the fibers consist of recycled material.

Source:

Freudenberg Performance Materials Holding SE & Co. KG

17.06.2022

Beaulieu Technical Textiles: going green with sustainable geotextiles

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

  • BTT’s woven geotextiles can reduce CO2-emissions in infrastructure projects by a factor of 10 compared to more conventional methods
  • Product specific Environmental Product Declarations for woven geotextiles transparently communicate their sustainability
  • EPDs an essential tool to communicate sustainability performance
  • Helps carbon-conscious customers in their purchasing and decision making

Beaulieu Technical Textiles (BTT) has unveiled the next step in its mission to deliver sustainable solutions to customers - product specific Environmental Product Declarations (EPD), an essential tool for communicating sustainability performance - to fully support green certified construction projects by providing accurate information in readily available formats.

The carbon footprint of BTT’s woven geotextiles is amongst the lowest in the industry, making them one of the most sustainable solutions for civil engineering projects. An EPD shows a manufacturer's commitment to measure and reduce the environmental impact of its products and report these impacts in a very transparent way.

Construction products, like geotextiles, follow the very comprehensive European standard, EN 15804+A2. The third-party verification and approval by the international EPD® System officially demonstrates the low environmental impact of BTT’s geotextile products.

 

More information:
geotextiles Beaulieu
Source:

Beaulieu

Photo: Archroma
09.06.2022

Archroma at Techtextil 2022 with latest innovations and system solutions

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

Archroma will be at Techtextil 2022 in Frankfurt am Main, Germany, from 21 to 24 June 2022, to launch its latest innovations and system solutions aimed to help textile manufacturers with optimized sustainability, productivity and value creation in their markets.

Archroma will present 9 new solution systems and 3 innovations, and will hold 2 booth events.

3 innovation highlights

  • PFC-free* Smartrepel® Hydro SR, a new solution developed for the repellence of water-based soil;
  • Biocide-free OX20, a new odor-neutralizing technology newly launched by our partner SANITIZED AG;
  • Perapret® AIR, a new mineral finishing technology for air purification is activated by natural and artificial light sources and can be applied on all fabrics

9 new solution systems
Archroma introduced its first ever solution systems at the Techtextil 2019 edition, and since then has developed more than 30 systems for technical textile and nonwoven applications.

  • CLEAN AIR, a mineral air purification system that stays put on all kinds of fabrics and is activated by artificial and natural light, for as long as there is light; ➔ based on the new Perapret® AIR;
  • CONSCIOUSLY DEEP, a metal-free one-step scouring and dyeing system for medium to very dark colored nylons that stay deep and bright day after day, and are good for you and the planet;
  • EARTH SOFT, a biomass-based and vegan softening system that is suitable for all kind of fibers and makes you comfortable in your own skin;
  • NATURE BOUND, a compostable binder system for food filtration materials that protect you and the planet;
  • ODOR CONTROL 2.0, a system for odor-free sportswear where permastink cannot build up on your favorite clothes, that’s applicable on polyester, cotton and nylon; ➔ based on the new OX20;
  • RAG N’ROLL, a compostable binder system for nonwoven cleaning rags, that protect you and the planet;
  • SAFE SEATS NextGen, a PFC-free* and halogen-free* modular surface treatment system for safer and cleaner seating materials, ➔ based on the new Smartrepel® Hydro SR;
  • SWEET DREAMS, a metal and particle free* system that redefines protection for mattress ticking fabrics, with long-lasting hygiene and outstanding softness, that protects you and the environment;
  • TAKE A BREATH, an enhanced filtration system that keeps your air clean and fresh for longer putting health first and your competition behind;

2 booth events
A WORLD WITHOUT ODORS, FIGHT OR FLIGHT?
Innovation highlight: Biocide-free OX20 odor management solution by SANITIZED AG

Speakers:

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Georg Lang, Head of CC Finishing, Archroma
  • Stefan Müller, Head of BU Textiles Additives Sanitized
  • Yann Ribourdouille , Global registration expert Product Stewardship, Archroma

A WORLD WITHOUT PFC, DREAM OR REALITY?
Innovation highlight: PFC-free* Smartrepel® Hydro SR

Speakers

  • Nuria Estape, Panel Moderator, Head of Marketing & Promotion, Brand & Performance Textile Specialties, Archroma
  • Roland Borufka, Head of Competence Center Repellents, Archroma
  • Wolfgang Knaup, Head of R&D repellents, Archroma
  • Yann Ribourdouille, Global registration expert Product Stewardship, Archroma
Source:

Archroma / EMG

Thermore launches EVOdown® made of recycled fibers (c) Thermore
09.06.2022

Thermore launches EVOdown® made of recycled fibers

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

Thermore launches its new product EVOdown®, made of 100% recycled fibers from PET bottles. Thermore EVOdown® bridges the gap between free fibers and traditional padding, delivering the ultra-soft hand and drape of blow-in fibers in a rolled form.

EVOdown® consists of millions of free fibers encapsulated by two containing outer layers. It is light-weighted and has a silky touch.

EVOdown® is another step towards sustainability for the Milan-based company, which has now converted over 97% of its turnover into insulations made of either fully or partially recycled fibers (based on actual sales figures). This brings Thermore closer to an exclusively sustainable product offer. Sustainability has always been part of Thermore’s DNA, as the Group pioneered the use of recycled fibers in the early 80s and mastered it thereafter.

More information:
Thermore Down Fibers plastics Recycling
Source:

Thermore

08.06.2022

TEXAID enables Circularity Project R[ECO]LLECT

TEXAID with its Spanish subsidiary PERCENTIL enable Springfield to put its commitment to sustainability into action through implementing a circularity pilot project with the aim of giving a second life to second-hand garments. As part of the Tendam Group, who operates more than 2000 stores in 79 countries, Springfield partners with the TEXAID group, leading in the industry of collecting, sorting, reselling and recycling used garments, to launch the R[ECO]LLECT initiative.

Take-Back Program R[ECO]LLECT
With "the future is circular" as their call to action, the project is called R[ECO]LLECT and refers directly to the collection of all second-hand garments in good condition, to meet three clear sustainability objectives of Springfield: reduce the pressure on natural resources, reduce CO2 emissions and reduce the amount of textile waste.

R[ECO]LLECT was launched in May 2022 as a pilot project in 16 Springfield stores in Spain across different cities and provinces.

TEXAID with its Spanish subsidiary PERCENTIL enable Springfield to put its commitment to sustainability into action through implementing a circularity pilot project with the aim of giving a second life to second-hand garments. As part of the Tendam Group, who operates more than 2000 stores in 79 countries, Springfield partners with the TEXAID group, leading in the industry of collecting, sorting, reselling and recycling used garments, to launch the R[ECO]LLECT initiative.

Take-Back Program R[ECO]LLECT
With "the future is circular" as their call to action, the project is called R[ECO]LLECT and refers directly to the collection of all second-hand garments in good condition, to meet three clear sustainability objectives of Springfield: reduce the pressure on natural resources, reduce CO2 emissions and reduce the amount of textile waste.

R[ECO]LLECT was launched in May 2022 as a pilot project in 16 Springfield stores in Spain across different cities and provinces.

TEXAID’s Spanish subsidiary PERCENTIL is a strategic partner of Springfield in this step towards sustainability. The motto of PERCENTIL is that "there is nothing more sustainable than what you already have in your closet", and it is an intermediary between people who want to get rid of clothes and those who are looking to buy almost new clothes from brands recognized for their design and quality, but at a much lower price. In this way, textile overproduction is reduced, and the environmental impact is reduced. In addition, PERCENTIL receives the clothes, sorts them and takes care of giving them a second life.

More information:
Texaid Springfield circularity
Source:

Texaid

(c) adidas AG
Felix Auger-Aliassime
30.05.2022

adidas commitment to end plastic waste with SS22 Tennis Collection

adidas launches its SS22 Tennis Collection, a high-performance tennis apparel line featuring graphics inspired by Paris’ botanical gardens and green spaces, garments in the collection were made either in part with Parley Ocean Plastic or in part with recycled content.

Launching ahead of the most prominent clay court tournament of the summer, the SS22 Tennis Collection is being premiered on court by adidas next-gen athletes, Elena Rybakina and Felix Auger-Aliassime, alongside Maria Sakkari, Dominic Thiem and Stefanos Tsitsipas who all share a passion for championing sustainability and working together towards a better future for our planet.

From Insight to Action
The SS22 Tennis Collection is another step adidas is taking on its journey to help end plastic waste, and its athletes are sharing this commitment. For adidas athletes, what they wear on the court is not only performance attire but an expression of their personal style and beliefs.

adidas launches its SS22 Tennis Collection, a high-performance tennis apparel line featuring graphics inspired by Paris’ botanical gardens and green spaces, garments in the collection were made either in part with Parley Ocean Plastic or in part with recycled content.

Launching ahead of the most prominent clay court tournament of the summer, the SS22 Tennis Collection is being premiered on court by adidas next-gen athletes, Elena Rybakina and Felix Auger-Aliassime, alongside Maria Sakkari, Dominic Thiem and Stefanos Tsitsipas who all share a passion for championing sustainability and working together towards a better future for our planet.

From Insight to Action
The SS22 Tennis Collection is another step adidas is taking on its journey to help end plastic waste, and its athletes are sharing this commitment. For adidas athletes, what they wear on the court is not only performance attire but an expression of their personal style and beliefs.

Felix Auger-Aliassime, elite tennis player, commented: "I'm part of a generation of players who care about having an impact on and off the court. When I think about the future, it's not just about my future as a tennis player, but also about the future of the planet. . That's why I wear the new adidas SS22 collection made in part with Parley Ocean Plastic or in part with recycled materials – to send a message that we can all do our part by helping to end plastic waste.“

Fashion-foward Performance
The SS22 Tennis Collection is designed to be bold yet fully functional on court. Each garment features HEAT.RDY technology which is designed to keep players feeling cool, dry and confident as they take on their next challenge.

The Collection features two dresses, tank tops, long sleeve tees and a match skirt for female players. For male players, the collection consists of two tees, a sleeveless tee, a polo tee, a TECHFIT long sleeve top and two different types of shorts.

It is available in a number of different bold graphic prints, all inspired by the Serres d'Auteuil botanical garden. The prominent colors of the collection are black and white.

Source:

adidas AG

12.05.2022

C.L.A.S.S. Eco Hub launches sustainable Training

C.L.A.S.S. has taken another strategic step with Training, an educational offer made of three moments aimed at sharing valuable and practical information concerning three main areas of sustainable development. Training will be adding value to the Smart Academy offer by C.L.A.S.S., a program of events and conferences, lectures or customized training services, united by an important goal: to educate, raise awareness and inspire professionals, students and even consumers with an eye to the values of responsibility.

There are three trainings offered:

C.L.A.S.S. has taken another strategic step with Training, an educational offer made of three moments aimed at sharing valuable and practical information concerning three main areas of sustainable development. Training will be adding value to the Smart Academy offer by C.L.A.S.S., a program of events and conferences, lectures or customized training services, united by an important goal: to educate, raise awareness and inspire professionals, students and even consumers with an eye to the values of responsibility.

There are three trainings offered:

  1. Introduction to a new generation of fashion
    C.L.A.S.S. team will introduce and explain the new generation of value-driven fashion where the fusion of design, innovation, communication and responsibility shapes an informed and competitive business, able to play both at an economic and social level. Since 2007, at the base of our philosophy is a formula: Virtuous Fashion, the one with the capital F, is the product of an integration of design (D), innovation (I), sustainability (S) and communication (C). In brief: F = D x I x S x C.
     
  2. Introduction to Smart Ingredients
    What is a responsible material? How to source responsibly? Which are the latest smart ingredients that can enrich with new generation fashion collections?
    During the session participant will be guided through materials available in the market, and will have the chance to have an “informed background“ of each one of the materials' journey. Conscious Choices can be made ONLY IF we have all the true full information in our hands. This training informd participant to make the best informed choice for their objectives. A simple but facts driven introduction to the key available innovative and sustainable materials: naturals, transformed and innovative where traceability, transparency, innovation, performance, responsible measurements are leading both the storymaking and the storytelling of each one of them.
     
  3. Introduction to Sustainability Report
    The preparation of the company's sustainability report is a fundamental moment to define objectives, identify improvement actions, and measure its environmental and social impact. It is a job that involves the entire company team, which can transform the report into an opportunity for growth.
    The package offered by C.L.A.S.S., in collaboration with Silvia Gambi, sustainable fashion journalist and podcaster of Solo Moda Sostenibile, combines training with personalized consulting with a coaching action to guide the company team in the preparation of its sustainability report, offering the necessary support to create a document that tells about the company, its values, its commitment and also its objectives.
Source:

C.L.A.S.S.

Mobile robot system for automated loading of a bobbin creel (c) STFI
12.05.2022

STFI with sustainable and digital innovations at Techtextil 2022

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

The Saxon Textile Research Institute (STFI) will be presenting innovative highlights from research and development at Techtextil 2022, the international trade fair for technical textiles and nonwovens. In addition to a warp-knitted textile façade greening in a modular system and textile lightweight construction elements for the building sector made from hemp as a renewable raw material, the STFI will also be showing innovations from nonwovens research. The project optiformTEX is an example of the nonwovens competence: in this project, the mass per unit area was specifically influenced for the production of semi-finished products in the automotive sector. Furthermore, the Chemnitz Institute exhibits an ecological foam coating for protective textiles. Central highlight of the STFI's presence at the fair is also a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel.

Highlights at Techtextil 2022
The greened façade tile is a system with which large building surfaces can be cost-effectively greened through a simple, modular segment structure. In addition to insulating the building, the system has been created to meet the design requirements of a modern city centre; low-maintenance greening is made possible through functional integration in the textile carrier layer and coordinated plant selection.

Moulded components made of natural fibre nonwovens are increasingly used in the automotive sector. Conventional nonwovens currently have uniform masses per unit area. Technical solutions for load-oriented component reinforcement and the resulting optimised use of materials represent an enormous economic potential. The basic idea of “optiformTEX” was therefore to specifically influence the mass per unit area distribution in the pile before the semi-finished product is consolidated. As a result, a textile-technological process and the corresponding plant component were successfully developed.

Future-oriented materials are offered by developments from the field of renewable raw materials in combination with bio-based resin systems: In the “Gro-Coce” project, an innovative ceiling system was developed by combining sustainable building products and methods. Currently, a high-performance hemp-based semi-finished product as well as the steps for its reproducible production by means of textile surface formation is developed by the research team. Initial application and load tests of the hemp-based semi-finished products on wooden beams confirmed the high performance potential of the natural fibre materials.

Special functional textiles are based on composite materials with coatings or membranes. The previous production of the coatings/membranes poses ecological and health risks. At STFI, solvent-free, purely aqueous coating systems and a technology for their application were therefore developed for the protective textile sector, resulting in a breathable, waterproof and wash-resistant textile coating.

The central highlight of the STFI's presence at the fair is a mobile robot system, which demonstrates the automated loading of a small-scale bobbin creel. At the STFI, the robot is part of the “textile factory of the future”, where a play mat is woven and processed step by step along the textile chain.