From the Sector

The previously communicated targets for 2020 are unlikely to be achieved due to the COVID-19 pandemic

The Board of Management of SGL Carbon SE determined today, that the forecasted results for the fiscal year 2020 are unlikely to be achieved due to the global COVID-19 pandemic. In light of the substantial uncertainty regarding the duration and the consequences of the COVID-19 pandemic, the Board of Management is currently unable to provide a reliable sales revenue and earnings forecast for the current year. Consequently, the guidance for 2020 is suspended. 

The previous expectation, which guided for a slightly lower sales revenue und a recurring EBIT1 approximately 10-15% below the prior year (sales revenue 2019: €1,087m; recurring EBIT 2019: €48m), was already made conditional by the Board of Management in the management report published on March 12, 2020, that negative effects from the coronavirus were not included, as the outbreak at that time was mainly restricted to China and Italy. In the meantime, numerous other governments have introduced far-reaching measures with substantial limitations on the public and economic sectors and leading economists now forecast significant reductions in economic output in key economies. 

The Board of Management of SGL Carbon has introduced and partially already implemented comprehensive measures to reduce the cost base and to secure liquidity. These measures include the introduction of short-time work, reduction of material and indirect spend, as well as further reduction resp. postponement of capital expenditures. In addition, we are exploring further financing options independent of the capital markets, some of which are already in preparation. The Company is intensively working on identifying and mitigating potential risks. 

Diverging development in the two business units impact fiscal year 2019 of SGL Carbon – Group guidance for 2020 confirmed

• Consolidated sales revenues in fiscal year 2019 up by 4 percent to around 1.1 billion euros
• Consolidated recurring EBIT down by 25 percent to 48 million euros; record results of graphite specialities business did not fully compensate for the weak development in the carbon fiber business
• Composites – Fibers & Materials (CFM): Cyclical und structural weaknesses impact the result of the market segments Wind Energy, Textile Fibers and Industrial Applications, which have limited strategic significance in the medium term
• Graphite Materials & Systems (GMS): Sales and earnings on record level due to strong growth in the market segments Semiconductors and Automotive
• Non-cash impairment charge of around 75 million euros was recorded at CFM in the third quarter of 2019
• Free cash flow significantly improved
• Issue of a new corporate bond and early redemption of the 2015/2020 convertible bond has significantly improved the maturity profile
• SGL Carbon confirms guidance for fiscal year 2020: sales expected slightly below previous year; recurring EBIT approximately 10 to 15 percent below previous year level
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: “The financial development of the fiscal year 2019 conceals the fact that our strategic orientation is correct. This is evident from our growth and the increasing number of contracts and projects we acquired in our strategic core markets. Main drivers are the topics of sustainable mobility and energy as well as digitization. Therefore, we expect that we can grow our consolidated revenue by a mid to high single-digit percentage per year on average between 2020 and 2024.“

The fiscal year 2019 developed very differently in the two business units of SGL Carbon. The record results in the graphite specialities business could not fully compensate for the weak development in the market segments Wind Energy, Textile Fibers and Industrial Applications in the carbon fiber business. Group sales grew by 4 percent to 1.1 billion euros. Recurring Group EBIT declined by 25 percent to 48 million euros. Due to the ongoing weakness in the market segments Textile Fibers and Industrial Applications the business unit CFM recorded a non-cash impairment loss of 75 million euros in the third quarter of 2019. With minus 90 (prior year: plus 41) million euros, consolidated Group result declined significantly compared to last year’s good results. The Group confirms its guidance for 2020 published in October 2019.

Group sales are expected to decline slightly compared to the prior-year level, whereas Group recurring EBIT is expected to reach a result around 10 to 15 percent below the prior-year level. Consolidated net result of the Group in 2020 should strongly improve compared to prior-year level to a low double-digit loss.

The Supervisory Board of SGL Carbon SE today appointed Dr. Torsten Derr as Chief Executive Officer of SGL Carbon SE for the duration of five years effective July 1, 2020. With this appointment, Dr. Derr is succeeding Dr. Jürgen Köhler, who resigned from his mandate as Chief Executive Officer of SGL Carbon SE effective August 31, 2019.  

Since 2016, Dr. Torsten Derr is holding the position of Managing Director of SALTIGO GmbH, a subsidiary of LANXESS AG. Following his master degree and attainment of his PhD in chemistry at the University of Bremen, Dr. Derr began his professional career 1997 at Bayer AG, and since 2003 at LANXESS AG, where he was Vice President for Plastic Intermediates, Head of the Business Units Material Protection Products and EDPM-Elastomers, as well as holding various other management functions, amongst others as Head of Commercial & Supply Chain Excellence & Chief Commercial Officer of LANXESS AG.

• Batteriekästen aus Faserverbund für die Elektromobilität
• Flexible neue Blattfeder-Generation für Hinterachse
• Neuartige Bauteilkonzepte für Passagierflugzeuge, Helikopter und Flugtaxis
• Extrem leichter und steifer Transferbalken für den Maschinenbau

Auf der diesjährigen JEC World, der größten Fachmesse für Verbundwerkstoffe, vom 3. bis 5. März 2020 in Paris stellt die SGL Carbon die serielle Fertigung von Komponenten für die Branchen Automobil, Luftfahrt und Industrie in den Fokus. Entscheidend sind individuelle Lösungen mit innovativen Bauteildesigns und darauf abgestimmten serientauglichen Materialien und Produktionsverfahren. Unter dem Motto „The Solution Provider“ präsentiert das Unternehmen in Halle 6, Stand D25, ausgewählte neue Bauteillösungen aus allen drei Bereichen.

„Dank unserer integrierten Wertschöpfungskette von der Faser bis zum fertigen Bauteil, unserem Lightweight and Application Center sowie unserem zunehmend breiteren Portfolio an realisierten serientauglichen Konzepten bieten wir unseren Kunden smarte, maßgeschneiderte Lösungen aus einer Hand. Unsere umfassende Expertise sowie unsere hocheffizienten Materialien aus dem Automobilbereich setzen wir zukünftig verstärkt auch in der Luftfahrt und im industriellen Bereich ein“, erklärt Dr. Andreas Wöginger, Leiter Technologie des Geschäftsbereichs Composites – Fibers & Materials bei der SGL Carbon.

Within the framework of the preparations for the Group annual financial statements and based on preliminary results, SGL Carbon confirms its guidance for 2019 as revised in October 2019. Accordingly, the Company continues to expect Group sales between €1.05 and €1.1 billion and Group EBIT before extraordinary items between €45 and 50 million. In addition, net financial debt as of December 31, 2019 has also developed as expected, increasing by a mid double digit million € amount and thus remaining below the €300 million mark.

SGL Carbon also confirms the initial outlook for 2020 as presented in October 2019. Group sales is anticipated slightly below the 2019 level and Group EBIT before extraordinary items 10-15% below the 2019 level. To reflect the lower earnings expectations and within the context of a conservative free cash flow management, the Company will restrict capital expenditures to €70-80 million in 2020 (previous guidance: approximately €100 million) and thus approximately on the level of depreciation.

As usual, SGL Carbon will communicate further details on the guidance for 2020, particularly relating to the guidance on the level of the reporting segments, with the publication of the annual report 2019 on March 12, 2020.

The Company will also publish statements on the new mid-term plan on this date.

• Series order for a total of 500 units
• First SGL Carbon component project for manned autonomous aviation

SGL Carbon will begin serial production of landing gear made from braided carbon fiber material early this year. The landing skids will be installed in around 500 air taxis worldwide over the next two years.

The air taxis will be powered by several electric motors. To optimize the range of the taxis, every single gram counts. Measuring about two meters in length and 1.5 meters in width, the ultra-light landing skid will weigh less than three kilograms, making it about 15 percent lighter than a similar component made from aluminum. This increases the potential flight time capacity of the air taxi which is a key differentiator for the air taxi operator.

“With with our landing gear we help to shape this very new, promising application of manned, autonomous civil aviation. This involvement also demonstrates our wide range of services. From engineering, to prototype manufacture, to serial production with our own materials – all of our competences along the entire value chain made a contribution to the project ,” emphasizes Dr. Andreas Erber, Head of the Aerospace segment of the Composites – Fibers & Materials business unit at SGL Carbon.

The landing gear was developed in close collaboration between customer experts and specialists from SGL Carbon. The carbon fibers for the component are produced at the SGL Carbon plant in Muir of Ord, Scotland. The final part is being manufactured at the SGL Carbon site in Innkreis, Austria.

• New composite e-mobility application gains momentum
• Strengthening regional footprint in North America
• Potential for further extensions

Following the production of first prototypes of battery enclosures for a Chinese automotive manufacturer in 2018, SGL Carbon has now received a contract from a North-American automaker for high-volume serial production of carbon and glass fiber-based composite top and bottom layers for battery enclosures. The serial production of the components will start end of 2020. The carbon fibers and fabrics as well as the assembled components come from SGL Carbon’s fully integrated value chain. On top of this order, there is the potential for more extensions with further substantial volumes for the shared platform business of the manufacturer.

In addition, SGL Carbon has won a smaller volume contract from a European sports car manufacturer to serially produce bottom layers made of composite as of mid-2020. The company is additionally in talks with further automakers to develop and manufacture battery enclosure solutions for their e-car platforms.

“Driven by the increasing need for e-cars worldwide and thus for new flexible chassis platforms, our composite battery enclosures are a very promising new application in our product portfolio. The recent contract wins show that our approach of developing custom-made solutions based on our integrated value chain offers an excellent value proposition”, says Sebastian Grasser, Head of Automotive Segment.

SGL Carbon and Solvay collaborate to develop highly-competitive advanced carbon fiber composites for aerospace primary structures

SGL Carbon and Solvay have entered into a joint development agreement (JDA) to bring to market the first composite materials based on large-tow intermediate modulus (IM) carbon fiber. These materials, which address the need to reduce costs and CO2 emissions, and improve the production process and fuel efficiency of next-generation commercial aircraft, will be based on SGL Carbon’s large-tow IM carbon fiber and Solvay’s primary structure resin systems.

The agreement encompasses both thermoset and thermoplastic composite technologies. It builds on Solvay’s leadership in supplying advanced materials to the aerospace industry and SGL Carbon’s expertise in high-volume carbon fiber manufacturing.

“For Solvay, this is an opportunity to lead the aerospace adoption of a composite material based on 50K IM carbon fiber. This is a highly competitive value proposition that brings more affordable high-performance solutions to our customers. We see this as the first step in a long-term partnership,” said Augusto Di Donfrancesco, member of Solvay’s executive committee.

“By combining SGL’s carbon fiber expertise in our newly developed, unique 50K IM fiber with Solvay’s resin formulation and aerospace market expertise, both partners are aiming to develop an advanced aerospace material system. This alliance supports our strategic direction and accelerates our growth in the attractive aerospace market,” said Dr. Michael Majerus, spokesman of the management board of SGL Carbon.

Composite materials for aerospace applications represent a multi-billion-dollar market that is expected to grow strongly in the coming decade. Solvay and SGL Carbon are uniquely positioned to develop solutions to address the needs of this market.

• Group sales increases by approximately 6 percent compared to the prior year period to 832 million euros due to organic growth in the market segments Digitization, Energy and Chemicals
• Group recurring EBIT at around 54 million euros; adjusted for a positive one-time effect in the prior year approximately on the comparable level of the prior year
• Business unit Composites – Fibers & Materials (CFM) deteriorated substantially in the third quarter 2019 due to the weak development in the market segments Textile Fibers, Wind Energy and Industrial Applications; Graphite Materials & Systems (GMS) developed better than expected on the very good level of the prior quarter reaching overall a record high level in 9M/2019
• Free cash flow from continuing operations improved significantly in the first nine months
• Impairment testing triggers a non-cash impairment charge of approximately 75 million euros in CFM in the third quarter
• Revised guidance of October 25, 2019: Recurring EBIT at CFM in a negative mid-to-high single digit million euros amount and on Group level at 45 to 50 million euros
• Countermeasures initiated to improve earnings of CFM
• Dr. Michael Majerus, Spokesman of the Board of Management of SGL Carbon: ”The structural growth drivers remain intact in our strategically relevant markets. The countermeasures to improve earnings of CFM will be implemented consistently.”

In the third quarter 2019, the business units of SGL Carbon developed very differently. While Graphite Materials & Systems (GMS) showed better than expected results, Composites – Fibers & Materials (CFM) deteriorated compared to the two previous quarters. This is attributable to the weaker development in the market segments Textile Fibers and Industrial Applications. In total, sales revenue in the first nine months 2019 grew by approximately 6 percent to reach 832 million euros. Recurring Group EBIT after nine months reached approximately 54 million euros. Adjusted for a positive one-time effect in the prior year, this was comparable to the prior year level.

In its ad-hoc notification of October 25, 2019, the company revised its guidance for recurring EBIT of CFM downwards to a negative mid to high single digit million euro amount. On the Group level the company now expects a recurring EBIT at 45 to 50 million euros. Due to the lower starting point in 2019 as well as the ongoing weakness in the market segments Textile Fibers and Industrial Applications in the business unit CFM a non-cash impairment charge in the amount of approximately 75 million euros was recorded in the third quarter 2019. In recent years acquired assets of the former joint ventures with BMW and Benteler were not affected by this impairment. In addition, the impairment charge of CFM led to a valuation allowance on deferred tax assets in the amount of 7.4 million euros. Against this background, SGL Carbon now expects a net result of approximately minus 100 million euros for fiscal year 2019.

On October 14, 2019, the Supervisory Board of SGL Carbon SE decided to appoint Dr. Stephan Bühler as an additional member to the Board of Management effective October 15, 2019. He will be responsible for Legal and Compliance.

Dr. Bühler is familiar with the Company, having been Head of Legal and Compliance for many years. He is therefore perfectly suited for his new role. He will assume this responsibility on a temporary basis until a new Chief Executive Officer has been appointed and taken office.

Dr. Michael Majerus, who has been the sole member of the Board of Management of SGL Carbon SE since September 1, will run the Company as Spokesman of the Board of Management going forward.