From the Sector

Reset
6 results
(c) PFAFF Industriesysteme und Maschinen GmbH
PFAFF 1591
02.11.2021

PFAFF INDUSTRIAL at A + A fair in Düsseldorf/Germany

From 26/10/2021 til 29/10/2021 PFAFF INDUSTRIAL has participated at thw A + A fair in Düsseldorf/Germany - one of the few IN-PERSON-EVENTS in 2021. The A + A event is the leading International trade fair for safety, security and health at work. 1,204 exhibitors from 56 nations and more than 25,000 trade visitors travelled to Düsseldorf, Germany to attend the sector’s most relevant trade fair. PFAFF INDUSTRIAL showcased several industrial sewing- and welding solutions on a common booth with Duerkopp Adler.

PFAFF 1591:
Electronic postbed shoe machine with new programmable thread tension device. The machine is stepping motor driven - no tolerance of the stitch lengths at different speeds. Top-quality for all assembly and decorative seams are ensured.

From 26/10/2021 til 29/10/2021 PFAFF INDUSTRIAL has participated at thw A + A fair in Düsseldorf/Germany - one of the few IN-PERSON-EVENTS in 2021. The A + A event is the leading International trade fair for safety, security and health at work. 1,204 exhibitors from 56 nations and more than 25,000 trade visitors travelled to Düsseldorf, Germany to attend the sector’s most relevant trade fair. PFAFF INDUSTRIAL showcased several industrial sewing- and welding solutions on a common booth with Duerkopp Adler.

PFAFF 1591:
Electronic postbed shoe machine with new programmable thread tension device. The machine is stepping motor driven - no tolerance of the stitch lengths at different speeds. Top-quality for all assembly and decorative seams are ensured.

PFAFF 3590:
CNC Large-area sewing unit (500 x 400 mm sewing area) for full-automatic topstitching of work shoe uppers. The machine guarantees accurate seam quality due to the intermittent feed (feed stop when needle enters material); shifting of the material in the work clamp is avoided and wear on the hook is reduced. The vertical hook system ensures excellent multi-directional sewing properties.

PFAFF 8303i:
Hot-air taping machine for welding continuous seams on water-resistant, waterproof and breathable materials. The fair machine has been shown with post from back which is predestinated for the show production.

PFAFF 8323:
Hot-air welding machine for welding of reflective strips on work, sports, protective and saftey wear with up to 70% time savings compared to conventional processing

PFAFF 8311 (005 001):
Ultrasonic welding machine with sonotrode (steel) and automatic welding force control.

PFAFF 8311 (105 001):
Ultrasonic welding machine as C&S DUAL version – Cutting and welding a second seam in ONE operation. New and key feature of this version - the cutting wheel can be switched on and off via the touch control panel.

Source:

PFAFF Industriesysteme und Maschinen GmbH

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. (c) PFAFF
PFAFF 4520: Full-automatic mask production unit
05.10.2020

PFAFF 4520: Full-automatic mask production unit

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. The product combines 150 years of expertise in joining textile materials and a concentrated know-how of the PFAFF INDUSTRIAL and KSL brands in the areas of process control, automation and robotics.

The PFAFF 4520 is an investment in a robust and sophisticated production line (MADE IN GERMANY) with an exceptionally reliable working process. In times of Covid-19 it is so important to rely on the right equipment for the mask production and avoid costly readjustments or an unnecessary second investment!

Key facts of the unit:

With the PFAFF 4520, engineers and technicians from PFAFF have designed a full-automatic production line (CE compliant) for processing multi-layer disposable masks, which meets the requirements of "German engineering" in a unique way. The product combines 150 years of expertise in joining textile materials and a concentrated know-how of the PFAFF INDUSTRIAL and KSL brands in the areas of process control, automation and robotics.

The PFAFF 4520 is an investment in a robust and sophisticated production line (MADE IN GERMANY) with an exceptionally reliable working process. In times of Covid-19 it is so important to rely on the right equipment for the mask production and avoid costly readjustments or an unnecessary second investment!

Key facts of the unit:

-    Size of the mask: 175 x 95 mm
-    Output:  3,500 – 4,000 masks per hour
-    1-, 2- or 3 ply processing  (Non-woven/filtration fabric)
-    SPS (PLC) control of the entire mask system
-    Exceedingly quiet working process of the whole unit
-    Ultrasonic welding components from German manufacturers
-    Protective housing for occupational safety of the operator
-    Packing station + printing station for personalized masks (on request)

The machine package also includes important features in the pre- and after sales:

PFAFF technicians ensure the adjustment of the desired customer material (non-woven or similar filter material) and the number of layers (1-, 2-, 3-ply) to the machine and make a "Ready to production" installation of the whole unit at the customer.  A fast service response time in after-sales (by involvement of the PFAFF sales- and service partner on site) ensures a maximum production output.

(c) PFAFF Industriesysteme und Maschinen GmbH
03.04.2020

Andreas Tobisch new “Head of Sales” of the PFAFF Industriesysteme und Maschinen GmbH

Effective from April 1st, 2020 Andreas Tobisch takes over the position “Head of sales” of the PFAFF Industriesysteme und Maschinen GmbH. The 60-year-old assumes the responsibility for sales activities at the PFAFF location in Kaiserslautern/Germany.

Andreas Tobisch started his career at PFAFF in 1981, where he worked in sales at various locations in Germany. In the mid-1990s, he switched to an international sewing machine dealer as sales manager for almost 10 years before he started successfully his own business in the sewing machine industry together with a partner (both managing directors). At the end of 2014, PFAFF Industriesysteme und Maschinen GmbH was able to win him back for a position in the growth area of "welding technology", where he was most recently the responsible segment manager.

Effective from April 1st, 2020 Andreas Tobisch takes over the position “Head of sales” of the PFAFF Industriesysteme und Maschinen GmbH. The 60-year-old assumes the responsibility for sales activities at the PFAFF location in Kaiserslautern/Germany.

Andreas Tobisch started his career at PFAFF in 1981, where he worked in sales at various locations in Germany. In the mid-1990s, he switched to an international sewing machine dealer as sales manager for almost 10 years before he started successfully his own business in the sewing machine industry together with a partner (both managing directors). At the end of 2014, PFAFF Industriesysteme und Maschinen GmbH was able to win him back for a position in the growth area of "welding technology", where he was most recently the responsible segment manager.

Together with the management and his sales team, Andreas Tobisch will consistently and successfully implement the sales, product and marketing strategy of PFAFF Industriesysteme und Maschinen GmbH. One focus of his work is to expand and strengthen the sales activities of industrial sewing machines, welding machines and automatic sewing units from PFAFF INDUSTRIAL in Kaiserslautern/Germany.

More information:
Pfaff
Source:

PFAFF Industriesysteme und Maschinen GmbH

PFAFF INDUSTRIAL auf der Messe SIMAC Tanning Tech (c) PFAFF Industrial
PFAFF INDUSTRIAL auf der Messe SIMAC Tanning Tech
13.02.2020

PFAFF INDUSTRIAL at SIMAC Tanning Tech

At this year’s trade fair „SIMAC Tanning Tech“, PFAFF Industrial, together with DÜRKOPP ADLER and the regional agency DAP ITALIA, will present the latest solutions for shoe and leather processing. The fair will take place in Milan from 19th to 21st of February 2020. The joint booth is located in Hall 14, No. C09.

PFAFF News and Highlights:

PFAFF 3806
New integrated workplace for closing rub-down seams, such as heel-, front- and side seams on street shoes, slippers and leg boots. The PFAFF 3806 is equipped with two-thread chainstitch high-speed seamer head PFAFF 5487 with drop feed and variable top feed, high lift and adjustable top feed pressure, which ensures consistently high quality. Reinforcing tapes, which may be applied from top impart greater durability to the seams and prevent fine leathers from being pulled out of shape. Automatic control sequences (via parameter or photocell) reduce the manual handling and increase the process reliability and output.

At this year’s trade fair „SIMAC Tanning Tech“, PFAFF Industrial, together with DÜRKOPP ADLER and the regional agency DAP ITALIA, will present the latest solutions for shoe and leather processing. The fair will take place in Milan from 19th to 21st of February 2020. The joint booth is located in Hall 14, No. C09.

PFAFF News and Highlights:

PFAFF 3806
New integrated workplace for closing rub-down seams, such as heel-, front- and side seams on street shoes, slippers and leg boots. The PFAFF 3806 is equipped with two-thread chainstitch high-speed seamer head PFAFF 5487 with drop feed and variable top feed, high lift and adjustable top feed pressure, which ensures consistently high quality. Reinforcing tapes, which may be applied from top impart greater durability to the seams and prevent fine leathers from being pulled out of shape. Automatic control sequences (via parameter or photocell) reduce the manual handling and increase the process reliability and output.

PFAFF 1591
On the fair PFAFF INDUSTRIAL will show its electronic single-needle shoe post-bed machine with touch-control panel, new thread trimmer for short thread ends (< 5 mm) and new programmable thread tension. The key benefit of “programmable thread tension” is that suitable thread tensions can be applied for different material thicknesses and/or for different seam sequences (as these can be programmed on electronic machines). The tensions can be accessed and/or set via a knee switch or stitch counting. Manual setting of the thread tension, as is common with current shoe machines, is no longer necessary with the programmed thread tension.

PFAFF 8303i
The ot-air taping machine for welding continuous seams on water-resistant, waterproof and breathable materials will be exhibited as “shoe version” with very small/slim post from back. Effortlessly shoe uppers with small radii can be taped. The slim post and the differential feed (via two separate drive motors for the top and bottom feed roller) ensures absolute neat seams and a requested fullness und shaped parts.
 

(c) PFAFF Industriesysteme und Maschinen GmbH
11.11.2019

PFAFF New feature: Programmable thread tension

The current generation of PFAFF shoe post-bed machines, that is viewed in the industry as the mother of all shoe machines, is the most frequently copied industrial shoe post-bed machine. Being copied means that PFAFF have done a lot on the machine that is good. However, it also means that the German machinery supplier always have to be one step ahead with regard to technology and that bit better with regard to quality. This is what the market expects, this is what the customer expects from PFAFF. The new “Programmable thread tension” is the latest feature of the electronic shoe post-bed series PFAFF 1571/1574/1591. The key benefit of “programmable thread tension” is that suitable thread tensions can be applied for different material thicknesses and/or for different seam sequences (as these can be programmed on electronic machines). The tensions can be accessed and/or set via a knee switch or stitch counting. Manual setting of the thread tension, as is common with current shoe machines, is no longer necessary with the programmed thread tension. This increases the quality and significantly improves the process reliability.

The current generation of PFAFF shoe post-bed machines, that is viewed in the industry as the mother of all shoe machines, is the most frequently copied industrial shoe post-bed machine. Being copied means that PFAFF have done a lot on the machine that is good. However, it also means that the German machinery supplier always have to be one step ahead with regard to technology and that bit better with regard to quality. This is what the market expects, this is what the customer expects from PFAFF. The new “Programmable thread tension” is the latest feature of the electronic shoe post-bed series PFAFF 1571/1574/1591. The key benefit of “programmable thread tension” is that suitable thread tensions can be applied for different material thicknesses and/or for different seam sequences (as these can be programmed on electronic machines). The tensions can be accessed and/or set via a knee switch or stitch counting. Manual setting of the thread tension, as is common with current shoe machines, is no longer necessary with the programmed thread tension. This increases the quality and significantly improves the process reliability. “Programmable thread tension” is initially available as an option on the electronic machines 1571/1591.

(c) PFAFF Industriesysteme und Maschinen GmbH
23.08.2019

PFAFF INDUSTRIAL on FILTECH fair 2019 in Cologne

Production units with latest joining technologies for the filtration industry

The core competence of PFAFF Industriesysteme und Maschinen GmbH is the joining of flexible materials. The company not only masters industrial sewing applications, but has also been an innovation leader in textile welding applications for decades. Depending on the material and customer requirements, customer solutions are implemented using the ULTRASONIC, HOT-AIR or HOT WEDGE welding methods. In addition to the classical industries such as 'clothing, shoes, home and car upholstery', the company has made a name for itself as a specialist supplier of production solutions for the filter industry. Whether it be filters for dry filtration (dust removal, air conditioning and ventilation technology) or for liquid filtration, such as pleating filters, tube filters, stocking filters, pocket filters, bag filters, etc., the articles must first be assembled. In close dialogue with the customer, PFAFF defines the right joining technology and implements this in the machine or production line.

Production units with latest joining technologies for the filtration industry

The core competence of PFAFF Industriesysteme und Maschinen GmbH is the joining of flexible materials. The company not only masters industrial sewing applications, but has also been an innovation leader in textile welding applications for decades. Depending on the material and customer requirements, customer solutions are implemented using the ULTRASONIC, HOT-AIR or HOT WEDGE welding methods. In addition to the classical industries such as 'clothing, shoes, home and car upholstery', the company has made a name for itself as a specialist supplier of production solutions for the filter industry. Whether it be filters for dry filtration (dust removal, air conditioning and ventilation technology) or for liquid filtration, such as pleating filters, tube filters, stocking filters, pocket filters, bag filters, etc., the articles must first be assembled. In close dialogue with the customer, PFAFF defines the right joining technology and implements this in the machine or production line.

With the brands PFAFF INDUSTRIAL and KSL, the company has the necessary experience in process engineering, electrical engineering, automation technology and robotics to meet customer requirements for reliable, partly fully automatic solutions. A fully automatic production line for the manufacture of filter bags (with longitudinal seams) for an Asian customer is currently being manufactured in Kaiserslautern/Germany. At the heart of the system are the exchangeable hot-wedge welding and 3-thread chainstitch sewing units. Depending on the application, these can be implemented in the manufacturing process in just a few minutes. The raw material is unrolled, precisely formed and quickly and reliably fed to the sewing or welding unit. After joining, the 'tubes' are cut (filter length selectable via display) and automatically ejected. Optionally, the parts can be labelled using a printer. Depending on the material, the plant reaches a production speed of 10m/min.

More information:
Pfaff Industrial
Source:

PFAFF Industriesysteme und Maschinen GmbH