From the Sector

Trützschler and the Indian company Gimatex have a long relationship that began in 2006. Gimatex has used Trützschler’s IDF in direct spinning and are now using it to turn textile waste into ring yarn.

Gimatex Industries Pvt. Ltd. operates fully integrated facilities with ginning, spinning, recycling, weaving and processing units in Hinganghat, within India’s cotton-growing region of Vidarbha. It also runs a fabric processing unit in Dholka, near Ahmedabad. Together, Trützschler and Gimatex are working in close collaboration with the shared aim of extending that long history far into the future.

Trützschler’s Integrated Draw Frame (IDF) technology is at the heart of this collaboration. Gimatex is using these solutions to produce high-quality yarn. In particular, IDF enables Gimatex to produce yarns from a wide variety of raw materials – from 100 percent cotton through to polyester, recycled fibers and blends of various different inputs.

Gimatex mainly uses Trützschler IDF to manufacture rotor yarns in a direct spinning process. Direct spinning means shortening the spinning process by eliminating draw frame passages. Fiber slivers are fed directly from the card into the integrated drafting passage. This direct spinning concept uses less electricity and less space than conventional draw frame passages, which helps Gimatex to cut costs while increasing output volumes – with no compromise in quality. Most often, IDF technology is used for rotor and vortex spinning. However, the team at Gimatex is now also one of the first spinning mills in India to develop a special IDF process for producing traditional and recycled ring yarn. This allows the company to leverage the same setup it uses for open-end yarn. The ring yarn produced in this unusual way is mostly coarser varieties and recycling blends for cotton / spandex (lycra) products, with Ne 10s and Ne 16s. The yarn goes through a blow room into a TC 15 card with IDF, before entering a Trützschler TD 10 draw frame, a speed frame and a ring frame.

The LYCRA Company, a global leader in developing innovative and sustainable fiber and technology solutions for the apparel and personal care industries, is a 2024 thought leadership partner of the United Nations Fashion and Lifestyle Network and will be participating in the third annual meeting on June 3 at the United Nations (UN) Headquarters in New York City.

Jean Hegedus, The LYCRA Company’s sustainability director, will be joining the panel discussion on “Elevating Fashion: Sustainable Practices and Strategic Insights in the Apparel Industry.” She will highlight The LYCRA Company’s collaboration with Qore® to use its QIRA® product to potentially help reduce the carbon footprint of LYCRA® fiber by up to 44 percent.*

Available in early 2025, patented bio-derived LYCRA® fiber made with QIRA® will consist of 70 percent renewable content derived from dent corn. This renewable spandex will be the first available on a large scale and it will deliver equivalent performance to traditional LYCRA® fiber without requiring re-engineering of processes, garment patterns or fabrics.

This annual meeting brings together media, industry stakeholders, governments, and UN entities to advance knowledge, promote collaboration and enable action to meet Sustainable Development Goals (SDGs) in the fashion and lifestyle sectors.

The United Nations Fashion and Lifestyle Network is led by the United Nations Office for Partnerships and the Fashion Impact Fund. The Network stands as a catalyst for sustainable development within the fashion and lifestyle sectors.

*Estimate from Cradle-to-Gate Screening LCA for a representative LYCRA® fiber manufacturing facility, June 2022, prepared by Ramboll Americas Engineering Solutions, Inc.

HeiQ AeoniQ Holding, a subsidiary of HeiQ Group, is appointing Julien Born as its CEO, leveraging his extensive executive leadership and profound textile industry expertise cultivated in prestigious organizations such as DuPont, KOCH Industries, and The LYCRA Company, where he served as CEO since 2021. Julien Born will champion the growth of the cellulosic filament fiber HeiQ AeoniQ™.

The HeiQ AeoniQ™ technology is poised for commercial production at the inaugural manufacturing facility in Portugal by the close of 2025. The just concluded €5M acquisition of land and buildings, within a 2-year project total investment of €80M, marks a pivotal milestone for the 15,000m2 facility in Maia, Porto. Situated strategically in Portugal's textile hub and a mere 20 minutes from a major commercial port, this facility is poised to catalyze the scale-up phase of the business, going from pilot manufacture to mass production when it wants to compete at full-scale on cost and performance with fossil fuel-based fibers.

HeiQ intends to consolidate the Group’s current and future activities in Portugal at the newly acquired site. This includes Shared Service Center functions as well as the Innovation Hub for the HeiQ Textile & Flooring business unit.

The recent addition of Julien Born to lead the charge follows the nomination of Robert van de Kerkhof to the HeiQ Board, a seasoned executive with extensive textile experience holding positions as CCO, CSO, Board member of Lenzing Plc, and Chairman of CIRFS, the European Man-Made Fibres Association. Robert will also serve as the Chairman of the HeiQ AeoniQ Holding Board.

HeiQ AeoniQ Holding, established as an independent subsidiary to attract new investors, value-chain partners, and brands, embarks on an ambitious multi-year scale-up strategy. This strategy involves integrating diverse sources of bio-derived feedstock and hyper-scaling cellulosic filament fiber production capacity over the next decade, targeting industries such as apparel, footwear, automotive, home textiles, and aeronautics.

Majocchi, an Italian textile manufacturer, reports that it has achieved functional and visual appeal with its key fabrics since installing Baldwin Technology Co. Inc.’s corona surface treatment technology.  

Based in Tavernerio (Como), Majocchi has a history of being a technological innovator in the textile industry. Within a decade of its conception in 1941, Majocchi became a global supplier of waterproof cotton for rainwear manufacturers. In the 1960s, the company began producing nylon and technical fabrics, which paved the way for it to become a leading provider of textiles for urban fashion, technical workwear and the military today.

Majocchi has partnered with U.S -based Baldwin Technology Co. to utilize its unrivaled corona surface-treatment technology to produce superior wettability and adhesion.  

Corona treatment is a technique that temporarily modifies a substrate’s surface tension  properties. The corona oxidation process improves the penetration and absorption of liquids on cellulosic and synthetic fabrics. Utilizing corona treatment before resin application on fabrics such as lycra and nylon facilitates superior adhesion and resin distribution. As a result, corona-treated fabrics provide exceptional color and tonal quality.  

Majocchi uses Baldwin’s Corona Pure Model to apply polyurethane and acrylic-based coatings to its fabrics. The system allows Majocchi to administer a controllable, uniform coating to achieve the desired functionality and aesthetics.

The system is 2,000 millimeters wide with a discharging station and four ceramic electrodes designed for textile applications with the flexibility of customizing plasma dosage for a given fabric structure, width and process speed. The Corona Pure model allows for fabric treatment up to 300 gr/m² in thickness. The system is customizable, with single-sided and dual-sided treatment capabilities. The “Easy Change” feature allows for a seamless replacing of electrodes and rapid cleaning and removal of fiber and dust residue, maintaining optimal exhaust air flow. The treatment system is built with a swiveling housing mechanism, which provides clearance for changes in textile thickness and protects the ceramic electrodes.

RHEON LABS, a fast-growing materials technology company based in Battersea, London, has completed an extensive 6 month trial with FET, a world leader in laboratory and pilot meltspinning equipment. Backed by a £173,000 grant from Innovate UK for feasibility studies, RHEON LABS has further developed its RHEON™ technology, a reactive polymer that dynamically stiffens when subjected to force. The technology can control energy of any amplitude or frequency, from small vibrations to forces at ballistic-speeds and therefore has a wide range of applications.
 
This Innovate UK Smart Grant-backed project aims to develop a hyper viscoelastic fibre from RHEON™ which displays high strain-rate sensitive properties. Creating a fibre with unique strain-rate sensitive properties will be a world first. It will enable the creation of a 'breakthrough-generation' of stretch textiles that can actively absorb, dampen and control energy during movement, rather than simply acting as a spring.

For close-fitting activewear and sports bras, the ability to actively control muscle mass or soft tissue movement during exercise will be a game-changing advancement. It will allow brands to engineer garments that relax during everyday use but actively stiffen during exercise for improved support and performance.
The Innovate UK grant was awarded under the category of Hyper-Viscoelastic Fibre Extrusion for Textile Manufacture. Fibre Extrusion Technology Limited (FET) enabled the customer trials at its bespoke Fibre Development Centre in Leeds, England using its in-house FET-103 Monofilament meltspinning facilities, in harness with RHEON and FET technical operatives. The next phase will be to upscale the trials of preferred materials on RHEON’s own new FET-103 meltspinning line, with FET’s continued support and expertise on hand.
 
Creating a fibre with unique strain-rate sensitive characteristics could be as radical a change in the market as the initial introduction of stretch fibre with the launch of Lycra™. The textiles would have a multitude of beneficial properties and would provide significantly less compression in the garment than conventional materials, substantially improving user comfort, support and performance.

«Armalith^® is the story of my passions. Firstly textiles, which opened the doors to the great ready-to-wear and haute couture houses. Then motorcycling, an incredible vehicle for finding freedom and meeting people. In 2003, I combined these two passions by creating Armalith^® with one idea in mind: to offer the best possible protection to bikers without compromising on the comfort and authenticity of a real pair of jeans. Today, Armalith 2.0^® is the denim of choice for the most prestigious brands for their abrasion protection equipment.» Pierre-Henry Servajean, Armalith^® MK Support manager.

Armalith 2.0 in facts:

• The mechanical qualities of leather with the comfort of denim
• Extreme resistance to cuts, traction, tears and abrasion
• High UV resistance that preserves its mechanical properties
• One layer for resistance that is superior to any lined products

High technology for high security
The heart of the armour is made of UHMWPE (high molecular weight polyethylene). This high resistance fiber comes from aerospace research; it is used for space module re-entry ropes, military armour, mooring cables for offshore platforms and more. This core is then covered with a cotton fiber using an exclusive and patented process, and combined with LYCRA^® dualFX^® technology for a powerful and durable stretch.

High resistance for high protection
High-tech integrated into authentic denim for unique comfort and protection, Armalith 2.0^® meets the most demanding standards such as Darmstadt and Cambridge, which are more scientific than the CE certification.
Armalith 2.0^® is available in 3 grades - A, AA and AAA - to cover all needs from urban use to maximum protection against abrasion. In its EXO (KNIT) form, Armalith 2.0^® can be used as a lining to increase resistance in specific areas without using other uncomfortable solutions.

High comfort for high style
Safety in a single layer of fabric, comfort, softness, stretchability, and style! Armalith 2.0^® is a real denim. Soft, supple, comfortable, breathable and hydrophilic, it allows all the usual textures, dyes, prints and finishing in low temperatures.

Armalith 2.0^® is an ethical and responsible denim

• GRS cotton sourced from Greece.
• Designed in France, manufactured and produced on a single site - spinning, dyeing, indigo, weaving, finishing - at Tejidos Royo in Spain.
• UHMWPE fibre requires half the energy to produce than aramids.
• The UHMWPE fibre used under the ARMALITH 2.0^® patent is continuous (no energy-intensive cracking) and untextured (no energy-intensive texturing).
• All Armalith 2.0^® denim manufacturing processes are carried out at low temperatures: a world first for stretch fabrics.
• No heavy metals used in the pigments, the indigo is made using a slow, cold, waterless process
• Resistant to more than a thousand washes for greater longevity and without loss of elasticity.

• INVISTA to showcase ‘Innovative Attitude’ at Intertextile Shanghai Apparel Fabrics
• Innovative INVISTA products, findings from a new textile industry IP protection survey, in-depth consumer insights and fashion trends will be revealed

INVISTA, one of the world’s largest integrated producers of polymers and fibres, will showcase the innovative attitudes enabling it to maintain a leading position in the textile industry at the upcoming Rendez-Vous 2017 at October’s Intertextile Shanghai Apparel Fabrics – the world’s most influential apparel event. INVISTA Rendez-Vous will showcase innovative INVISTA products, offer consumer insights and reveal the results of a textile industry IP protection survey.

INVISTA Rendez-Vous 2017 will be held at Intertextile Shanghai Apparel Fabrics 11 – 13 October at the National Exhibition and Convention Center in Shanghai, with INVISTA occupying two booths in hall 5.2 E49 and hall 7.2 E55. 

As a global authoritative trade show in textile industry, Intertextile Shanghai Apparel Fabrics has been a platform for INVISTA to communicate with players across the value chain for 23 years. This year’s event will be no exception. The rich and vivid content delivered at the show will focus on INVISTA’s Innovative Attitude to consumers, partners as well as the whole industry.

To build a healthy and sustainable marketing environment, INVISTA cooperated with a number of media organisations to conduct a survey on IP protection in the textile industry. The results will be revealed during a seminar entitled ‘Innovation and IP: An Avenue for Sustainable Textile Industry Development’, which will be held on 11 October, 2:45 – 3:45pm in the Textile Dialogue area in hall 5.2. Representatives from textile industry associations, legal firms and INVISTA will share the findings and offer insights during what will undoubtedly be one of the highlights of INVISTA Rendez-Vous 2017.

The main pavilion of the show will be located in the International Hall (hall 5.2), where three of INVISTA’s most innovative products will be on show. Visitors will experience the latest possibilities offered by LYCRA® MOVESTM BRA, LYCRA® MOVESTM LEGGINGS and LYCRA® MOVESTM HOSIERY.

LYCRA® MOVESTM BRA

According to consumer research conducted in 2016, bra products in China’s domestic market don’t match consumer demands in a host of critical areas, including support, comfort and aesthetic design. To address these concerns, streamline the industry and consolidate its leadership, INVISTA is launching LYCRA® lastingFIT technology for bra wings. In addition, INVISTA’s cutting-edge technology can contribute to meeting specific quality standards in bra wing fabrics, enabling Chinese consumers to experience higher levels of comfort and the appropriate support they expect from a bra in different occasions.

LYCRA® MOVESTM LEGGINGS

INVISTA’s longstanding commitment to legging fabrics will also be on display at Rendez-Vous. INVISTA’s LYCRA® MOVESTM LEGGINGS has already spawned LYCRA® SPORT Power-Comfort-Energy (PCE™) index-certified fabrics, which are now commercially available.

The revolutionary fabrics present excellent recovery performance for LYCRA® SPORT legging products. They also offer the industry an opportunity to develop a number of targeted segment markets – from compression and medium compress to light compression leggings.

LYCRA® MOVESTM HOSIERY

LYCRA® MOVESTM HOSIERY is all about fabric technology innovation. Due to excellent properties, such as anti-laddering, fit and durability as well as comfortable waistbands, INVISTA’s LYCRA® FUSIONTM technology has already been widely adopted in China’s hosiery sector.

A Packed Pavilion

At the LYCRA® MOVESTM Denim pavilion in the Beyond Denim hall (7.2), visitors won’t just see the innovative denim products offered by INVISTA; they will also learn about three themes highlighted through consumer insights – fit, shape and embracing heat & cold. There will also be a special session outlining the latest woven bottom trends, hosted by INVISTA experts.

Introduced commercially in 2010, LYCRA® dualFX® dual core yarn technology provides denim with super stretch and super recovery that fits all day and every day. It effectively prevents seam slippage and uneven fabric surfaces, keeping denim looking good, feeling comfortable and fitting, which in turn creates new denim fabric applications and fashion trends in the China market.

Last But Not Least

An interactive program, that includes visitors uploading pictures they take at the INVISTA booth to the official INVISTA WeChat account, will give every visitor a chance to win a special INVISTA gift. Visit INVISTA at hall 5.2 E49 and hall 7.2 E55 from 11 – 13 October at Intertextile Shanghai Apparel Fabrics 2017.