From the Sector

Reset
5 results
19.10.2021

Teijin to boost Heat-Resistant Carbon Fiber Prepreg Production

Teijin Limited announced today that its carbon fiber subsidiary Renegade Materials Corporation, a leading U.S.-based supplier of highly heat-resistant thermoset prepregs, resins and adhesives for the aerospace industry, will expand its prepreg production by 2.5 times approximately. The increased capacity, which aligns with Renegade’s capacity expansion strategy at the Miamisburg, Ohio location, is the result of a USD 4 million investment made in December 2019 and the construction was started in March 2020. Operation of the new production lines will commence January 2022.

Renegade Materials' heat-resistant thermoset prepregs, resins and adhesives are well trusted by U.S. and European aircraft manufacturers and aircraft engine suppliers.

Renegade Materials will showcase its high heat-resistant thermoset prepreg at the Composites and Advanced Materials Expo (CAMX), one of the largest, most comprehensive composites and advanced materials event in North America, at the Dallas Convention Center in Dallas, Texas, from October 19 to 21.

Teijin Limited announced today that its carbon fiber subsidiary Renegade Materials Corporation, a leading U.S.-based supplier of highly heat-resistant thermoset prepregs, resins and adhesives for the aerospace industry, will expand its prepreg production by 2.5 times approximately. The increased capacity, which aligns with Renegade’s capacity expansion strategy at the Miamisburg, Ohio location, is the result of a USD 4 million investment made in December 2019 and the construction was started in March 2020. Operation of the new production lines will commence January 2022.

Renegade Materials' heat-resistant thermoset prepregs, resins and adhesives are well trusted by U.S. and European aircraft manufacturers and aircraft engine suppliers.

Renegade Materials will showcase its high heat-resistant thermoset prepreg at the Composites and Advanced Materials Expo (CAMX), one of the largest, most comprehensive composites and advanced materials event in North America, at the Dallas Convention Center in Dallas, Texas, from October 19 to 21.

Source:

Teijin Carbon Europe GmbH

08.03.2021

SGL Carbon SE moves up to the SDAX after all

The Deutsche Börse AG Group announced that an incorrect data basis regarding the index changes published on March 3, 2021, had been corrected. As a result, the SGL Carbon SE share will be included in the small cap index SDAX on the chaining date on Monday March 22, 2021. The promotion to the SDAX is carried out within the framework of the so-called Regular Entry Rule.

The SDAX comprises 70 stocks, which follow the MDAX stocks in the ranking according to free float market capitalization and stock exchange turnover.

"We are very pleased that Deutsche Börse has corrected its previous decision and that we will be included in the SDAX," said Dr. Torsten Derr, Chief Executive Officer of SGL Carbon SE. "For us, the promotion is a confirmation of our restructuring efforts to date and at the same time an aspiration and obligation to consistently continue the path we have taken so far in the future."

The Deutsche Börse AG Group announced that an incorrect data basis regarding the index changes published on March 3, 2021, had been corrected. As a result, the SGL Carbon SE share will be included in the small cap index SDAX on the chaining date on Monday March 22, 2021. The promotion to the SDAX is carried out within the framework of the so-called Regular Entry Rule.

The SDAX comprises 70 stocks, which follow the MDAX stocks in the ranking according to free float market capitalization and stock exchange turnover.

"We are very pleased that Deutsche Börse has corrected its previous decision and that we will be included in the SDAX," said Dr. Torsten Derr, Chief Executive Officer of SGL Carbon SE. "For us, the promotion is a confirmation of our restructuring efforts to date and at the same time an aspiration and obligation to consistently continue the path we have taken so far in the future."

Source:

SGL Carbon SE

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates (c) MaruHachi
16.02.2021

MaruHachi/AMAC: High-temperature thermoplastic tapes and laminates

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

With their recently installed high-temperature unidirectional tape line, Japan-based composites manufacturer MaruHachi enables new opportunities for high-end applications in demanding market segments like aerospace, automotive or others outperforming traditional materials based on PP and PA which are already widely available.

In the first phase, MaruHachi will produce up to 40 tons/year and focuses now specifically on high-temperature thermoplastic uni-directional (UD) tapes and multi-layer sheet laminates. The material is based on high-performance fibers like carbon, aramid, glass or natural fibers and the matrix can be high-performance polymers like PPS, PEEK or other higher temperature polymers, which are much tougher than epoxies and easy to recycle. With a width of 500 mm, a specific weight from 60 to 350 g/m2, depending on the chosen material, the lines can operate under temperatures up to 420 degrees Celsius. Working under these extremely high temperatures allows for better material properties of the final application, higher performance, increased resistance and integrated high-performance functionalities e.g. by overmoulding.

Since 2017, MaruHachi Group is active in the European market in cooperation with Dr. Michael Effing,the CEO of AMAC GmbH, who advises and supports the company strategically. The established, family-owned MaruHachi Group has a strong history in automotive and medical textiles and has been active in the innovative composites market for more than 15 years.

Toshi Sugahara, CEO of MaruHachi: “For many years, we have already been cooperating with domestic and international partners on high-demand applications and therefore, MaruHachi decided now to invest over 1 million EUR in this new line in phase 1, including a funding participation from the Japanese government NEDO. New developments in phase 2 will be be undertaken by end of 2021 on the downstream technologies like the automated preforming and consolidation. With our new products, we want to contribute to significant weight reductions of the final products, thus improve energy efficiency while offering a cost-efficient and high-quality solution.”

Dr. Effing, CEO of AMAC GmbH confirms: „The focus on the niche of high-temperature products based on PPS and PEEK allows MaruHachi on very demanding high-end applications such as structural frames on space and aircrafts, aircraft seats or engine components etc. The tapes are fully recyclable and can be processed e.g. with high-speed with laser-based tape placement machines and robots.”

Source:

AMAC GmbH

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V

Thomas Dippold (c) Schaltbau Holding
Thomas Dippold
15.10.2020

SGL Carbon SE: Thomas Dippold ist Mitglied des Vorstands

Wie am 17. August 2020 berichtet, hatte der Aufsichtsrat der SGL Carbon SE Thomas Dippold mit Wirkung zum 1. Dezember 2020 zum CFO und Mitglied des Vorstands der SGL Carbon SE bestellt. Erfreulicherweise kann Herr Dippold kurzfristig sein Amt als Vorstandsmitglied der SGL Carbon SE früher antreten, so dass der Aufsichtsrat der Gesellschaft seine Bestellung nun auf den 15. Oktober 2020 vorgezogen hat, auch um die geplante Übernahme der CFO-Position vorzubereiten.

Herr Dippold tritt wie berichtet zum 1. Dezember 2020 die Nachfolge des langjährigen Finanzvorstands Dr. Michael Majerus an, der zum 30. November 2020 in gutem gegenseitigen Einvernehmen aus seinem Amt ausscheidet.

Dr. Stephan Bühler legt plangemäß sein Amt als Vorstandsmitglied zum 15. Oktober 2020 nieder.

Wie am 17. August 2020 berichtet, hatte der Aufsichtsrat der SGL Carbon SE Thomas Dippold mit Wirkung zum 1. Dezember 2020 zum CFO und Mitglied des Vorstands der SGL Carbon SE bestellt. Erfreulicherweise kann Herr Dippold kurzfristig sein Amt als Vorstandsmitglied der SGL Carbon SE früher antreten, so dass der Aufsichtsrat der Gesellschaft seine Bestellung nun auf den 15. Oktober 2020 vorgezogen hat, auch um die geplante Übernahme der CFO-Position vorzubereiten.

Herr Dippold tritt wie berichtet zum 1. Dezember 2020 die Nachfolge des langjährigen Finanzvorstands Dr. Michael Majerus an, der zum 30. November 2020 in gutem gegenseitigen Einvernehmen aus seinem Amt ausscheidet.

Dr. Stephan Bühler legt plangemäß sein Amt als Vorstandsmitglied zum 15. Oktober 2020 nieder.

Source:

SGL Carbon SE