From the Sector

Reset
178 results
Photo: MeineRaumluft
06.09.2023

OETI and MeineRaumluft join forces

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

OETI - Institute for Ecology, Technology and Innovation’ (or OETI for short), is now working with the independent platform ‘MeineRaumluft’.

OETI and MeineRaumluft will work closely together to make a sustainable contribution to optimising the indoor climate. Starting this autumn, they will implement a groundbreaking initiative in Austria. The primary objective of this initiative is to raise awareness of the significance of indoor air as a factor for health and productivity in work and office environments. This message will be conveyed by means of precise measurements, knowledge sharing as well as practical recommendations

OETI has a great deal of expertise in the field of indoor air measurements and certifications. The accredited institution is certified for emission testing according to ISO 16000 parts 2, 3, 6, 9 and 11 as well as EN 16516. OETI also sets standards for indoor air quality with its CLEANAIR certification.

More information:
OETI indoor climate
Source:

OETI - Institut fuer Oekologie, Technik und Innovation GmbH

A Dress For Venice 2023 Illustration by Jacopo Ascari for A Dress For Venice 2023
05.09.2023

A Dress For Venice - Debut at the International Film Festival

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

On Thursday, September 7th, at 12:30, in the Veneto Region's room at the Hotel Excelsior on Lido, Elena Donazzan, Councilor for Education, Training, Employment, and Equal Opportunities, will present the project alongside its creators Laura Scarpa and Lorenzo Cinotti of Venezia da Vivere, designer Tiziano Guardini, artist Jacopo Ascari, and actress Margot Sikabonyi.

"We conceived A Dress For Venice for Homo Faber in 2019, to celebrate Venice's 1600 years of craftsmanship," explains Laura Scarpa. "This year, the research extends to sustainable innovation thanks to an international team of designers, artisans and companies," continues Lorenzo Cinotti.

The project reaffirms Venice's role as an international laboratory to reflect on the planet's future. "A Dress For Venice" is a limited-edition collection realized with the support of a network of companies identified by the Tavolo Veneto della Moda (Confartigianato, CNA, Confindustria, Confesercenti and Confcommercio of Veneto), the global platform C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy), the partnership of Camera Buyer Italia and the media partnership of The Italian Rêve.

The presentation of the collection to buyers will take place at the Marina Guidi showroom in mid-September, while it will have its dedicated exhibition on Friday, October 20th, during the Venice Fashion Week.

"A Dress for Venice" is endorsed by the Comune di Venezia, the Regione del Veneto, and Homo Faber - Fondazione Cologni dei Mestieri d’Arte, which promotes worldwide high craftsmanship and savoir-faire.

Partners in the project Infinity srl and Tessitura Grisotto, renowned Italian textile manufacturers who expertly craft Bemberg™ fiber into exquisite fabrics. Creazioni Digitali, a specialized company in sublimation digital printing, carries out the prints on Bemberg™ textiles with its unique project GreenDrop; with inks that reduces the water consumption.

Other partners include Marina Iremonger, Camera Buyer Italia, and the Tavolo Veneto della Moda, representing Confartigianato, CNA, Confindustria, Confcommercio, and Confesercenti.

More information:
Venice Asahi Kasei Bemberg™
Source:

C.L.A.S.S. Eco Hub

DyStar Systainability Report 2022/23 DyStar Singapore Pte Ltd
25.08.2023

DyStar Releases 2022 – 2023 Integrated Sustainability Report

DyStar, a leading specialty chemical company announced the release of its thirteenth annual Integrated Sustainability Report. The report is prepared in accordance with the updated GRI Standards 2021: Core Options. Despite the challenging business landscape and economic situations, DyStar remains committed to delivering tangible values that the Group has strategically created through the six major capitals, using the Integrated Reporting <IR> framework.

DyStar’s business strategies have proven their effectiveness and delivered significant progress toward its 2025 targets. The company has successfully reduced its environmental footprint in Greenhouse Gas Emission intensity and Wastewater production intensity by more than 30%, compared to the baseline year 2011.

More specifically, DyStar’s Scope 1 and Scope 2 Greenhouse Gas (GHG) Emissions intensity was 45% lower (tCO2e per ton production) than the baseline year 2011, with a totaled GHG emission of 56.91 thousand tCO2e. This is also 9% lower when compared to FY2021.

DyStar, a leading specialty chemical company announced the release of its thirteenth annual Integrated Sustainability Report. The report is prepared in accordance with the updated GRI Standards 2021: Core Options. Despite the challenging business landscape and economic situations, DyStar remains committed to delivering tangible values that the Group has strategically created through the six major capitals, using the Integrated Reporting <IR> framework.

DyStar’s business strategies have proven their effectiveness and delivered significant progress toward its 2025 targets. The company has successfully reduced its environmental footprint in Greenhouse Gas Emission intensity and Wastewater production intensity by more than 30%, compared to the baseline year 2011.

More specifically, DyStar’s Scope 1 and Scope 2 Greenhouse Gas (GHG) Emissions intensity was 45% lower (tCO2e per ton production) than the baseline year 2011, with a totaled GHG emission of 56.91 thousand tCO2e. This is also 9% lower when compared to FY2021.

Similarly, for Wastewater production intensity, DyStar achieved a 52% reduction compared to baseline year 2011, and a 24% reduction from FY2021.

Some other key highlights and value-adds include (when compared to FY2021):

  • Financial Capital: The results of production efficiency and streamlining manufacturing indirectly contributed to the reduction of 5.8% in operating cost
  • Manufactured Capital: Apart from ensuring quality suppliers through DyStar’s internal audit, DyStar’s effort on environmental performance and climate impacts with the Institute of Public & Environmental Affairs (IPE) was recognized and ranked second by industry on IPE’s Green Supply Chain Corporate Information Transparency Index (CITI)
  • Intellectual Capital: The innovative Cadira® modules continue to support the supply chain with a lower carbon footprint
  • Human Capital: The full launch of DyStar University (DSU), a proprietary LMS, supports the learning and development of employees globally
  • Social Capital: DyStar’s culturally diverse workforce organized a variety of activities and events in support of its global community and made a total contribution of USD 128,946 to various corporate social responsibility (“CSR”) program.

Despite the harsh economic headwinds, these figures further demonstrated the effectiveness of DyStar’s initiatives that were installed throughout the reporting year.

DyStar maintains a cautious yet optimistic outlook on its global performance.

More information:
DyStar Sustainability Report
Source:

DyStar Singapore Pte Ltd

11.08.2023

Kornit Digital: Release of Third-Annual Impact Report

Kornit Digital LTD. issued its Impact Report for 2022, highlighting the Company’s progress against its long-term goals related to climate action, waste management, green chemistry, and workplace diversity. This third-annual report reinforces Kornit’s commitment to an Environmental, Social, and corporate Governance (ESG) strategy that aims to transform the fashion and textile industry into one that is significantly more sustainable and ethical.

“As a change-maker and leader in fashion and textiles, we take our responsibility seriously to foster an industry that is cleaner and safer, as well as one that is more responsible and diverse,” said Ronen Samuel, Chief Executive Officer at Kornit Digital. “We consider ourselves an agent of long- term industry-wide change by enabling our customers to be more sustainable, while also minimizing the social and environmental impact of our operations. The Kornit 2022 Impact Report reflects this commitment to transforming the industry and creating a brighter future for the planet and the people who inhabit it.”

Kornit Digital LTD. issued its Impact Report for 2022, highlighting the Company’s progress against its long-term goals related to climate action, waste management, green chemistry, and workplace diversity. This third-annual report reinforces Kornit’s commitment to an Environmental, Social, and corporate Governance (ESG) strategy that aims to transform the fashion and textile industry into one that is significantly more sustainable and ethical.

“As a change-maker and leader in fashion and textiles, we take our responsibility seriously to foster an industry that is cleaner and safer, as well as one that is more responsible and diverse,” said Ronen Samuel, Chief Executive Officer at Kornit Digital. “We consider ourselves an agent of long- term industry-wide change by enabling our customers to be more sustainable, while also minimizing the social and environmental impact of our operations. The Kornit 2022 Impact Report reflects this commitment to transforming the industry and creating a brighter future for the planet and the people who inhabit it.”

Download the 2022 Impact Report here.

More information:
Kornit Digital impact report ESG
Source:

Kornit Digital

Graphik CHT
08.08.2023

CHT Group publishes Sustainability Report 2022

The Sustainability Report 2022, which is now digitally available summarizes key ecological, economic, and social developments.
The report shows that the CHT Group has defined and anchored sustainability as an integral part of its corporate strategy.
 

  • The group of companies is pursuing the goal of becoming climate-neutral by 2045
  • At the end of 2021, the CHT Group subscribed to the Science Based Targets initiative (SBTi) to meet the targets of the Paris Climate Agreement and committed to the 1.5 °C target
  • 77 % of sales were achieved with sustainably classified products

The issue of sustainability has been anchored in the DNA of the internationally active foundation-owned group of companies for 70 years. No less an aspiration is derived from this than to support all customers with the most innovative, most sustainable products and solutions and thus to become the leading supplier of sustainable chemical products and solutions in all target markets.

The Sustainability Report 2022, which is now digitally available summarizes key ecological, economic, and social developments.
The report shows that the CHT Group has defined and anchored sustainability as an integral part of its corporate strategy.
 

  • The group of companies is pursuing the goal of becoming climate-neutral by 2045
  • At the end of 2021, the CHT Group subscribed to the Science Based Targets initiative (SBTi) to meet the targets of the Paris Climate Agreement and committed to the 1.5 °C target
  • 77 % of sales were achieved with sustainably classified products

The issue of sustainability has been anchored in the DNA of the internationally active foundation-owned group of companies for 70 years. No less an aspiration is derived from this than to support all customers with the most innovative, most sustainable products and solutions and thus to become the leading supplier of sustainable chemical products and solutions in all target markets.

"Climate neutrality" and comprehensive social responsibility  
In the implementation of the sustainability strategy of the CHT Group, the field of action "climate neutrality" takes a central role. The CHT Group has set itself the goal of being climate neutral both in its own production and in the supply chain from the year 2045. The path to climate neutrality by 2045 is illustrated in the report as part of the strategic goal.

In addition to climate protection, social responsibility is also a top priority for the CHT Group. The continuous improvement of health protection and occupational safety is a top priority for the company.

From CHT's point of view, qualified and committed employees make a significant contribution to the company's future success. For this reason, the CHT Group promotes the professional and personal development of its workforce to a high degree and invests in future-oriented and targeted training and further education of its workforce.

For the CHT Group, the respect for human rights is an indispensable pillar of the corporate culture and an essential part of the group-wide Code of Conduct. In 2022, the Human Rights Compliance Policy Statement was developed, and compliance processes and measures were put in place to prevent any violations and identify and mitigate human rights related risks.

 

More information:
CHT Group Sustainability Report
Source:

CHT Gruppe

28.07.2023

RadiciGroup: Bibs made from recyclable materials for UCI Cycling World Championships

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

To mark the occasion, the UCI turned to its Official Partner, Santini, to make the bibs that the staff (judges, volunteers, commissaires etc.) and accredited photographers wear throughout the event. The bibs are "eco-designed", which means they are specifically created to have a second life after use. Once the event is over, the bibs could be collected and sent to RadiciGroup and transformed into new material, to be then processed by Acerbis to create X-Elite handguards for mountain bikes. This project is a concrete example of the circular economy at work, allowing 100% of the materials used to be recovered.

To optimise the production cycle of the bibs for the 2023 UCI Cycling World Championships, the products must be eco-friendly from the very first phase. The fabrics were therefore made from Italian nylon yarn produced by RadiciGroup. The choice of nylon – an infinitely recyclable thermoplastic material – is intertwined with UCI's sustainability goals for "limited-use" garments: RadiciGroup was able to channel its know-how and expertise in the field of chemistry to create "circular" bibs, working alongside the other partners. As the innovative yarn selected by RadiciGroup allows for easy and high-quality printing, the fabric is also customisable. The yarn is then provided to Sitip to create the "ARAS NG" warp-knitted fabric (95 g/100 m2): a recyclable single-fibre material made from 100% polyamide. The resulting fabric is the first nylon of its kind, designed to meet the transfer printing needs of the third project partner, EFI Reggiani, as well as the recyclability standards requested by RadiciGroup. The choice of fabric was born from extensive applied research, in which EFI Reggiani tested a wide range of fabrics to find the best colour results and the best resistance to rubbing and perspiration, which is vital for the bibs' intended use. In addition to using the new GOTS-certified EFI Reggiani IRIS Plus water-based inks, EFI Reggiani opted for a printing solution on transfer paper that does not consume water and requires a minimal amount of energy per square metre. Finally, the white fabric from Sitip and the transfer paper printed by EFI Reggiani arrived at Santini, who were responsible for transferring all the graphics for the 2023 UCI Cycling World Championships bibs from the paper onto the fabric. Santini also took care to assemble the garments using only thread and components made from nylon or chemically similar materials, allowing the bibs to enter the recycling process at the end of their lives without any further processing.                   

Source:

RadiciGroup

06.07.2023

Alternative to synthetics: MAS Holdings invests in HeiQ AeoniQ™

MAS Holdings, a global apparel & textile manufacturing and tech conglomerate, headquartered in Sri Lanka, secures a stake in HeiQ AeoniQ™ as part of its Plan for Change initiative to support the development of next-generation cellulosic filament fibers to replace polyester and nylon.

HeiQ from Switzerland and MAS Holdings entered a partnership for MAS to secure a stake in HeiQ AeoniQ GmbH, a subsidiary of HeiQ Group that will produce HeiQ AeoniQ™, a climate-positive cellulosic yarn.

With this investment, MAS Holdings becomes the first manufacturer to partner with HeiQ AeoniQ™ in their efforts to provide a sustainable alternative to polyester and nylon. The investment to be made by MAS Holdings is part of the group’s strategy to drive a positive environmental impact. The MAS Plan for Change aims to generate 50% of the company’s revenue through sustainable products by 2025, revolutionizing the textile industry with a focus on innovation, sustainable sourcing, and pioneering circularity at scale.

MAS Holdings, a global apparel & textile manufacturing and tech conglomerate, headquartered in Sri Lanka, secures a stake in HeiQ AeoniQ™ as part of its Plan for Change initiative to support the development of next-generation cellulosic filament fibers to replace polyester and nylon.

HeiQ from Switzerland and MAS Holdings entered a partnership for MAS to secure a stake in HeiQ AeoniQ GmbH, a subsidiary of HeiQ Group that will produce HeiQ AeoniQ™, a climate-positive cellulosic yarn.

With this investment, MAS Holdings becomes the first manufacturer to partner with HeiQ AeoniQ™ in their efforts to provide a sustainable alternative to polyester and nylon. The investment to be made by MAS Holdings is part of the group’s strategy to drive a positive environmental impact. The MAS Plan for Change aims to generate 50% of the company’s revenue through sustainable products by 2025, revolutionizing the textile industry with a focus on innovation, sustainable sourcing, and pioneering circularity at scale.

With the closing of this deal, HeiQ and MAS agreed to a 5-year Offtake Agreement for 3,000 tons of HeiQ AeoniQ™ yarn in 2025 and 5,000 tons per year from 2026 to 2029, valued by HeiQ in the aggregate to US$ 100 million. MAS will finalize this commitment within a stipulated time period after achieving milestone 1, and a mutual plan for commercialization. HeiQ and MAS firmly believe that rapid scaling is key to facilitating the fast adoption of sustainable, circular technologies such as HeiQ AeoniQ™.

The HeiQ AeoniQ™ pilot plant in Austria is manufacturing this revolutionary continuous cellulosic filament yarn since Q3 2022, with up to a 100 tons capacity to be upscaled up to 300 tons by the end of 2023.

The HeiQ AeoniQ™ production scale-up is planned to have its definitive boost by early 2026 with the construction of an entirely new gigafactory capable of a 30,000-ton output per year, in a 250M USD estimated investment.

Polyester and nylon, two oil-based fibers, virtually non-recyclable, account for about 70% of all the global textile production, they take between 350 to 1000 years to degrade in nature, are currently close loop recycled at less than 1%, and are at the origin of 35% of the microplastics that can be found in today's oceans. HeiQ AeoniQ™ was innovated and is being hyper-scaled up to change this course of action.

More information:
MAS Holdings HeiQ AeoniQ
Source:

HeiQ

DITF: Textile structures regulate water flow of rain-retaining "Living Wall" (c) DITF
Outdoor demonstrator on the Research CUBUS. At the top is the textile water reservoir with all inputs and outputs and textile valve for rapid emptying. Below are the substrate blocks with integrated hydraulic textiles
30.06.2023

DITF: Textile structures regulate water flow of rain-retaining "Living Wall"

Climate change is causing temperatures to rise and storms to increase. Especially in inner cities, summers are becoming a burden for people. While densification makes use of existing infrastructure and avoids urban sprawl, it increases the amount of sealed surfaces. This has a negative impact on the environment and climate. Green facades bring more green into cities. If textile storage structures are used, they can even actively contribute to flood protection. The German Institutes of Textile and Fiber Research (DITF) have developed a corresponding "Living Wall".

The plants on the green facades are supplied with water and nutrients via an automatic irrigation system. The "Living Walls" operate largely autonomously. Sensory yarns detect the water and nutrient content. The effort for care and maintenance is low.

Climate change is causing temperatures to rise and storms to increase. Especially in inner cities, summers are becoming a burden for people. While densification makes use of existing infrastructure and avoids urban sprawl, it increases the amount of sealed surfaces. This has a negative impact on the environment and climate. Green facades bring more green into cities. If textile storage structures are used, they can even actively contribute to flood protection. The German Institutes of Textile and Fiber Research (DITF) have developed a corresponding "Living Wall".

The plants on the green facades are supplied with water and nutrients via an automatic irrigation system. The "Living Walls" operate largely autonomously. Sensory yarns detect the water and nutrient content. The effort for care and maintenance is low.

Innovative hydraulic textile structures regulate water flow. The rock wool plant substrate on which the plants grow has a large volume in a small space thanks to its structure. Depending on how heavy the precipitation is, the rainwater is stored in a textile structure and later used to irrigate the plants. In the event of heavy rainfall, the excess water is discharged into the sewage system with a time delay. In this way, the "Living Walls" developed at the DITF help to make efficient use of water as a resource in post-densified urban areas.

The research project also scientifically investigated the cooling performance of a green facade. Modern textile technology in the substrate promotes the "transpiration" of the plants. This creates evaporative cooling and lowers temperatures in the surrounding area.

The work of the Denkendorf research team also included a cost-benefit calculation and a life-cycle analysis. Based on the laboratory and outdoor studies, a "green value" was defined that can be used to evaluate and compare the effect of greening buildings as a whole.

28.06.2023

EPTA highlights contribution of pultruded composites to sustainable construction

Increasing energy and resource efficiency in the construction sector will be key to the EU’s ambition of achieving climate neutrality by 2050. By enabling the manufacture of strong, durable and lightweight products, composite materials can help the construction sector improve its environmental sustainability, as well as reduce total lifecycle costs. The latest EPTA industry briefing, Pultruded composites contribute to a more sustainable future for construction, discusses how pultruded composites answer the need for materials offering high performance, faster installation, corrosion resistance and low maintenance.

The report is available to download from the EPTA website.

Increasing energy and resource efficiency in the construction sector will be key to the EU’s ambition of achieving climate neutrality by 2050. By enabling the manufacture of strong, durable and lightweight products, composite materials can help the construction sector improve its environmental sustainability, as well as reduce total lifecycle costs. The latest EPTA industry briefing, Pultruded composites contribute to a more sustainable future for construction, discusses how pultruded composites answer the need for materials offering high performance, faster installation, corrosion resistance and low maintenance.

The report is available to download from the EPTA website.

The future of construction
As one of the largest global users of energy and raw materials, the construction industry is under immense pressure to improve its sustainability. At the same time, it must respond to demands for improved performance and reduced total cost of ownership. New materials will be needed to minimise the use of natural resources, enable a reduction of carbon footprint and facilitate circular economy practices. Choosing the optimum materials required for durability throughout the lifecycle will be increasingly important. A shift to off-site production is also forecast, where factory-controlled environments and automated processes can improve quality control, lower waste, and reduce work on site.

Lightweight pultruded parts can be pre-assembled into modules or complete structures in the factory for faster installation on site. Lightweight profiles lower energy use during transportation and installation, and a longer service life combined with minimal maintenance can deliver a reduced through-life carbon footprint. Pultruded parts such as profiles, gratings, beams, tubes and planks are increasingly found in a range of building, construction and infrastructure applications. Examples include bridge decks, fencing, stairs and handrails, train platforms, cladding, utility poles, modular building concepts, and window frames.

One application offering large growth potential for composites is bridges. Composite bridges are being designed to provide a service life of 100 years and unlike steel bridges do not require regular repainting to protect them from corrosion. Over recent years, pultruded glass fibre composite has become a highly popular choice for pedestrian and cycle bridges. Pre-fabricated ‘easy fit’ bridge decking planks, pre-assembled bridge modules and complete bridge ‘kits’ are now available. Corrosion-resistant composite bridges are ideal for use near water or on the coast, and in remote locations where regular maintenance operations would be difficult. A composite bridge can deliver the same performance as a steel structure with a weight saving of up to 50% or more. This enables more streamlined bridge designs which require less substantial supporting structures and foundations, greatly reducing consumption of materials and energy. Lightweight also results in easier logistics and simplified installation. Pultruded are more easily transported to the construction site, with lower fuel consumption, and easier to move on site, often reducing labour requirements and the capacity of lifting equipment.

A lifecycle approach
As the construction industry looks to the future, the environmental and economic benefits of composite materials linked to easier logistics and installation, durability and low maintenance are becoming increasingly valued. More projects are demonstrating the benefits of composite materials and standards covering the design, fabrication and installation of pultruded profiles are making it easier for the construction industry to use them. With ongoing development and collaboration, pultrusion has the potential to contribute to a more sustainable future for construction and many other industries. EPTA will continue to promote the advancement of pultrusion technology and its applications and foster sustainable practices within the industry.

Source:

The European Pultrusion Technology Association (EPTA)

Photo: pixabay
21.06.2023

Bangladesh to stage climate event for fashion and textiles

Bangladesh will stage the world’s first climate conference for the fashion industry this autumn, on 12 October. The Bangladesh Climate Action Forum will convene policy makers, garment manufacturers, fashion retailers and other industry stakeholders to look at solutions for decarbonising global textile supply chains.

The event will focus on technological and financial challenges around reducing emissions. Most of the world’s leading fashion brands have now set ambitious targets for reducing supply chain emissions. These targets relate to 2030 by which time many brands aim to reduce emissions by 50 per cent, and 2050 where most fashion brands aim to be carbon neutral.

The Bangladesh Climate Forum Action will examine causes of climate crisis, its urgency, impacts we have already seen, and what we can expect under both businesses as usual and rapid decarbonisation scenarios.

Bangladesh will stage the world’s first climate conference for the fashion industry this autumn, on 12 October. The Bangladesh Climate Action Forum will convene policy makers, garment manufacturers, fashion retailers and other industry stakeholders to look at solutions for decarbonising global textile supply chains.

The event will focus on technological and financial challenges around reducing emissions. Most of the world’s leading fashion brands have now set ambitious targets for reducing supply chain emissions. These targets relate to 2030 by which time many brands aim to reduce emissions by 50 per cent, and 2050 where most fashion brands aim to be carbon neutral.

The Bangladesh Climate Forum Action will examine causes of climate crisis, its urgency, impacts we have already seen, and what we can expect under both businesses as usual and rapid decarbonisation scenarios.

Also presenting at the event will be the Government of Bangladesh, which will address Bangladesh’s actions to mitigate the impacts of the climate crisis. Bangladesh is particularly vulnerable to climate change and is ranked the seventh extreme disaster risk-prone country in the world according to a report from the Global Climate Risk Index 2021. Tropical cyclones, tornadoes, floods, coastal and riverbank erosion, droughts and landslides are the major climate-induced hazards in Bangladesh.

The Bangladesh Climate Forum Action will also look at approaches towards decarbonization, including NetZero goals and timelines. Speakers will discuss globally recognised pathways for electricity/transportation/industry decarbonisation.

Renewable energy will also be under discussion. If fashion brands are to hit climate targets, it is imperative that supply chains switch to renewable energy and away from gas and fossil fuels. The event will look at challenges around the de-carbonisation of the electricity grid in Bangladesh, as well as the rate of transition toward renewable resources by garment factories, including solar power.

A key element of the event will be evaluation of practical solutions for Bangladesh’s RMG industry. It will profile specific solutions such as energy efficiency, machine upgrades, the electrification of thermal loads, direct power purchase agreements and biomass fed thermal systems. It will also discuss the challenges faced in the industry including business climate (and cycles), pricing, financing challenges, target setting and execution, policy opportunities, knowledge gaps and availability/scaling of solutions.

Financial challenges around decarbonisation of supply chains are significant, and it is far from clear who will pay for the technological upgrades required. While some investment support systems exist – such as lower interest financing – these are not always available, accessible or affordable for the majority of the RMG companies.

The event will explore financial options, changes to business/pricing models, opportunities for de-risking/underwriting investments, direct investment and other tools that need to emerge to address financial challenges and plug the funding gap. The event will also explore opportunities to decouple climate action from business cycles so that the 2030 targets can be met.

Source:

Bangladesh Apparel Exchange

(c) Sappi Europe
19.06.2023

Sappi Gratkorn’s increases share of renewable energy

As part of Sappi Europe's full scale decarbonisation roadmap, Gratkorn mill is expanding the share of biomass to be used as an energy source, further driving the move away from fossil fuels as part of the mill’s contribution to the European roadmap. The project follows the recent modernisation of the power plant boiler which enabled the shift from coal to a combined approach of biomass and natural gas.

The mill is now embarking on a next step, enhancing its infrastructure and therefore capacity in order to handle the delivery, sorting and processing of increased biomass levels. This increased utilisation requires an improved biomass handling system at the mill as well as decentralised intermediate storage terminals within the surrounding regions.

"With our long-standing competent wood sourcing partner Papierholz Austria, we will continue our journey to move away from fossil fuels at Gratkorn mill and work towards a climate-neutral future”, says Peter Putz, Managing Director of Sappi Austria GmbH.

For the near term, Sappi’s decarbonisation roadmap includes close to 80 projects being carried out across its European mills by 2025.

As part of Sappi Europe's full scale decarbonisation roadmap, Gratkorn mill is expanding the share of biomass to be used as an energy source, further driving the move away from fossil fuels as part of the mill’s contribution to the European roadmap. The project follows the recent modernisation of the power plant boiler which enabled the shift from coal to a combined approach of biomass and natural gas.

The mill is now embarking on a next step, enhancing its infrastructure and therefore capacity in order to handle the delivery, sorting and processing of increased biomass levels. This increased utilisation requires an improved biomass handling system at the mill as well as decentralised intermediate storage terminals within the surrounding regions.

"With our long-standing competent wood sourcing partner Papierholz Austria, we will continue our journey to move away from fossil fuels at Gratkorn mill and work towards a climate-neutral future”, says Peter Putz, Managing Director of Sappi Austria GmbH.

For the near term, Sappi’s decarbonisation roadmap includes close to 80 projects being carried out across its European mills by 2025.

“Our 2025 roadmap identifies the path we have embarked on towards a carbon-neutral future,” explains Sarah Price, Director Sustainability of Sappi Europe. The objective is to reduce emissions of specific greenhouse gases (Scope 1 and 2) by 25 per cent and to increase the share of renewable energy in Europe to 50 per cent by 2025 (compared to 2019). Additionally, Sappi’s 2030 science-based target is to reduce carbon emissions by 41.5% per ton of product. “We’re already making good progress towards these targets, with a large number of projects already well-underway or completed”.

Source:

Sappi Europe

(c) KARL MAYER GROUP
02.06.2023

KARL MAYER GROUP with sustainable technical textiles at ITMA

KARL MAYER GROUP will be presenting a WEFTTRONIC® II G at the ITMA with new features and upgrades for greater efficiency. This warp knitting machine with weft insertion produces lattice structures from high-strength polyester, which are firmly established in the construction industry in particular. With a working width of 213", it offers productivity and further advantages through design innovations. New features include weft thread tension monitoring, management and the new VARIO WEFT laying system. The component for the weft insertion aims at maximum flexibility. It allows the patterning of the weft yarn to be changed quickly and easily electronically, without mechanical intervention during yarn insertion and without limits on repeat lengths. In addition, there is less waste.

KARL MAYER GROUP will be presenting a WEFTTRONIC® II G at the ITMA with new features and upgrades for greater efficiency. This warp knitting machine with weft insertion produces lattice structures from high-strength polyester, which are firmly established in the construction industry in particular. With a working width of 213", it offers productivity and further advantages through design innovations. New features include weft thread tension monitoring, management and the new VARIO WEFT laying system. The component for the weft insertion aims at maximum flexibility. It allows the patterning of the weft yarn to be changed quickly and easily electronically, without mechanical intervention during yarn insertion and without limits on repeat lengths. In addition, there is less waste.

The KARL MAYER GROUP also supports its customers with well thought-out Care Solutions. The new support offers include retrofit packages for retrofitting control and drive technology for weft insertion and composite machines, and service packages that bundle various services. These include machine inspections and the replacement of all drive belts. The customer benefits from fixed prices that cover the costs of technician assignments, various discount options and transparent services.

A new solution for the vertical greening of cities is presented from the field of application for technical textiles. The core of the innovation is a grid textile produced on warp knitting machines with weft insertion by KARL MAYER Technische Textilien GmbH. The knitted lattice fabric is made of flax. It is used as a climbing aid for fast-growing plants, and after the greening phase, in autumn, it can be recycled together with these plants as biomass in pyrolysis plants to produce electricity and activated carbon. In summer, the planted sails lower the ambient temperature through evaporation effects. In addition, photosynthesis creates fresh air and binds CO2. Other important advantages are low soil requirements and flexible placement in public spaces. The greening system was developed by the company Micro Climate Cultivation, OMC°C, with the support of KARL MAYER Technische Textilien.

The KARL MAYER GROUP will also be exhibiting a sustainable composite solution made from natural fibres. The reinforcing textile of the innovative lightweight material is a multiaxial non-crimp fabric, which was also produced from the bio-based raw material flax on a COP MAX 4 from KARL MAYER Technische Textilien. The boatbuilding specialist GREENBOATS uses natural fibre composites to achieve sustainable products. The fact that it succeeds in this is shown, for example, by the Global Warming Potential (GWP): 0.48 kg of CO2 per kilogram of flax reinforcement compares with 2.9 kg of CO2 per kilogram of glass textile.

Source:

KARL MAYER Verwaltungsgesellschaft mbH

(c) wet-green GmbH
01.06.2023

wet-green GmbH earns USDA Certified Biobased Product Label

wet-green GmbH announced today that it has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product Label for wet-green® OBE 1 tanning agent for Olivenleder®.

wet-green® OBE 1 is made of 100% biobased raw materials coming from by-products of olive growing, covered by a global patent. wet-green® OBE 1 is applied as a pre-tanning agent and replaces standard tanning technologies e.g. Chromium, Glutaraldehyde, Zeolites etc., is non-corrosive, metal-free, free of synthetic reactive tanning chemicals, formaldehyde-free, glutaraldehyde-free, bisphenol-free, syntan free, viscous, pumpable and pleasant smelling. wet-green® OBE 1 is the next generation vegetable tanning agent suitable for a wide range of leather articles and applied since many years in areas e.g. automotive, upholstery, garments, shoes and accessories.

The wet-green® tanning agent for Olivenleder® can now display a USDA label that highlights its percentage of biobased content. Third-party verification for a product's biobased content is administered through the USDA BioPreferred® Program, which strives to increase the development, purchase, and use of biobased
products.

wet-green GmbH announced today that it has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product Label for wet-green® OBE 1 tanning agent for Olivenleder®.

wet-green® OBE 1 is made of 100% biobased raw materials coming from by-products of olive growing, covered by a global patent. wet-green® OBE 1 is applied as a pre-tanning agent and replaces standard tanning technologies e.g. Chromium, Glutaraldehyde, Zeolites etc., is non-corrosive, metal-free, free of synthetic reactive tanning chemicals, formaldehyde-free, glutaraldehyde-free, bisphenol-free, syntan free, viscous, pumpable and pleasant smelling. wet-green® OBE 1 is the next generation vegetable tanning agent suitable for a wide range of leather articles and applied since many years in areas e.g. automotive, upholstery, garments, shoes and accessories.

The wet-green® tanning agent for Olivenleder® can now display a USDA label that highlights its percentage of biobased content. Third-party verification for a product's biobased content is administered through the USDA BioPreferred® Program, which strives to increase the development, purchase, and use of biobased
products.

Biobased products help address climate change by offering renewable alternatives to petroleum-based products; sequester carbon dioxide, lowering the concentration of greenhouse gasses in the atmosphere that contribute to climate change; create and expand markets; are generally safer for people and the environment than their petroleum-based counterparts; and represent incredible technological advances and innovations.

More information:
wet-green GmbH Leather chemicals
Source:

wet-green GmbH

03.05.2023

Renewcell receives Fast Company 2023 World Changing Ideas Award

Renewcell is the recepient of the Fast Company 2023 World Changing Ideas Awards for the Sustainability/Energy category with the development of recycling unused textiles into pulp, branded as CIRCULOSE®, used for man-made cellulosic fiber production of viscose, modal, lyocell, acetate and other fibers. Additionally Renewcell is recognized as a finalist in the Europe, the Middle East, and Africa category, as well as a finalist in the climate category for the 2023 World Changing Ideas Awards.

World Changing Ideas Awards honor sustainable designs, innovative products, bold social initiatives, and other creative projects that are changing the way we work, live, and interact with the world.

Renewcell is the recepient of the Fast Company 2023 World Changing Ideas Awards for the Sustainability/Energy category with the development of recycling unused textiles into pulp, branded as CIRCULOSE®, used for man-made cellulosic fiber production of viscose, modal, lyocell, acetate and other fibers. Additionally Renewcell is recognized as a finalist in the Europe, the Middle East, and Africa category, as well as a finalist in the climate category for the 2023 World Changing Ideas Awards.

World Changing Ideas Awards honor sustainable designs, innovative products, bold social initiatives, and other creative projects that are changing the way we work, live, and interact with the world.

This year’s World Changing Ideas Awards showcase 45 winners, 216 finalists, and more than 300 honorable mentions—with health, climate, energy, and AI among the most popular categories. A panel of Fast Company editors and reporters selected winners and finalists from a pool of more than 2,200 entries across urban design, education, nature, politics, technology, corporate social responsibility, and more. Several new categories were added this year including rapid response, crypto and blockchain, agriculture, and workplace. The 2023 awards feature entries from across the globe, from Italy to Singapore to New Zealand. Fast Company’s Spring 2023 issue (on newsstands May 9, 2023) will showcase some of the world’s most inventive entrepreneurs and forward-thinking companies that are actively tackling global challenges.

(c) A. Monforts Textilmaschinen GmbH & Co. KG
Members and associates of the WasserSTOFF consortium from Monforts, Pleva, NTB Nova Textil, TU Freiberg, Hochschule Niederrhein and Honeywell Thermal Solutions, at the launch meeting of the new project at the Monforts ATC in Mönchengladbach.
28.04.2023

Monforts presents green hydrogen project WasserSTOFF at ITMA 2023

At ITMA 2023 in Milan from June 8-14 this year, Monforts is organising two free-to-attend seminars and discussions on the potential of green hydrogen as a new energy source for textile finishing, drying and related processes.

Monforts is currently leading a consortium of industrial partners and universities in the three-year WasserSTOFF project, launched in November 2022, that is exploring all aspects of this exciting and fast-rising new industrial energy option.
The target of the government-funded project is to establish to what extent hydrogen can be used in the future as an alternative heating source for textile finishing processes. This will first involve tests on laboratory equipment together with associated partners and the results will then be transferred to a stenter frame at the Monforts Advanced Technology Center (ATC).

At ITMA 2023 in Milan from June 8-14 this year, Monforts is organising two free-to-attend seminars and discussions on the potential of green hydrogen as a new energy source for textile finishing, drying and related processes.

Monforts is currently leading a consortium of industrial partners and universities in the three-year WasserSTOFF project, launched in November 2022, that is exploring all aspects of this exciting and fast-rising new industrial energy option.
The target of the government-funded project is to establish to what extent hydrogen can be used in the future as an alternative heating source for textile finishing processes. This will first involve tests on laboratory equipment together with associated partners and the results will then be transferred to a stenter frame at the Monforts Advanced Technology Center (ATC).

To be considered “green”, hydrogen must be produced using a zero-carbon process that is powered by renewable energy sources such as wind or solar. Currently, the cleanest method of hydrogen production is electrolysis, using an electrically-powered electrolyzer to separate water molecules into hydrogen and oxygen. The purity of the hydrogen is also important, and impurities must be removed via a separation process.

“Despite all its advantages, there are obstacles to overcome on the way to widespread, economically-feasible green hydrogen use,” explains Monforts Textile Technologies Engineer Jonas Beisel. “Until there are widely available, reliable and economical sources of this clean power, the cost of producing it will remain prohibitive. The infrastructure is not yet there, and hydrogen also has a tendency to make steel brittle and subject to fracture, which is something that requires further investigation in both its transportation and use in industrial processing.
“Green energy’s potential as a clean fuel source is tremendous, but there is much we need to explore when considering its use in the textile finishing processes carried out globally on our industry-leading Montex stenter dryers and other machines.”

At its Advanced Technology Center (ATC) in Mönchengladbach, Monforts will be carrying out intensive tests and trials to assess the reliability of both processes and final products when different natural gas and hydrogen mixtures – up to 100% green hydrogen – are employed. The results will be closely analysed by the consortium partners because there are many parameters that at this stage remain unknown.

The aim, Beisel adds, is to both reduce CO2 emissions and – following the rising prices and industry turbulence experienced by manufacturers over the past year or so – to further reduce a dependency on natural gas.

The three-year WasserSTOFF project is sponsored by Germany’s Federal Ministry for Economic Affairs and Climate Action, and with Monforts at the helm brings together industrial partners Pleva and NTB Nova Textil, with academic input from the Hochschule Niederrhein and the Technical University of Freiberg.

(c) IVL
26.04.2023

Indorama Ventures joins “Together for Sustainability” initiative

Indorama Ventures Public Company Limited (IVL) has joined “Together for Sustainability” (TfS), a global initiative for sustainable supply chains. Indorama Ventures joins a network of 47 TfS member companies representing the global chemical industry, reinforcing its commitment to driving sustainable solutions in its supply chain management.

Indorama Ventures Public Company Limited (IVL) has joined “Together for Sustainability” (TfS), a global initiative for sustainable supply chains. Indorama Ventures joins a network of 47 TfS member companies representing the global chemical industry, reinforcing its commitment to driving sustainable solutions in its supply chain management.

By joining TfS, Indorama Ventures is encouraging suppliers to meet high sustainability standards, reduce the risk of supply chain disruptions, and improve overall climate maturity. The collaboration will help foster an expansion of the company’s sustainable supply chain program. The company will contribute to the TfS Scope 3 Greenhouse Gas (GHG) workstream that developed and finetunes the Guideline for calculating Product Carbon Footprints (PCFs) in the chemical industry and beyond and, will develop an IT solution that will enable companies to share PCFs efficiently. This membership allows Indorama Ventures to further align with the UN Global Compact Principles.
 
Through this initiative, Indorama Ventures will also be partnering with EcoVadis to assess their suppliers to identify risks and opportunities along the value chain, improve sustainability practices, and encourage collaboration among members.

Source:

Indorama Ventures Public Company Limited 

(c) RadiciGroup
17.03.2023

RadiciGroup: 100% naturally sourced yarn made from castor oil

RadiciGroup presented Biofeel® Eleven, a yarn of natural origin, at the Performance Days trade fair (from March 15-16 in Munich). Biofeel® Eleven is sourced from castor oil and is suitable for obtaining bio-polymer. It can be used for fabrics and fine garments in many sectors, from fashion to sports, from automotive to home textiles.

Today, 80% of the world's castor-oil plantations are in India, particularly in the Gujarat region, due to its favourable climatic conditions. In this area, local people can earn an additional income by cultivating semi-arid land that does not compete with food production, and by applying the skills they have acquired over time to this work. Over the years, thanks to research, development and innovation in the value chain, the seeds from which the oil is produced have been selected and certified to ensure the finest quality, also in terms of end uses.

Castor beans contain around 45% oil, rich in ricinolein, from which the bio-polymer polyamide 11 is derived. This is the polymer RadiciGroup uses for its Biofeel® Eleven yarn. What remains after the first pressing is a highly effective bio-fertiliser that is returned to the soil.

RadiciGroup presented Biofeel® Eleven, a yarn of natural origin, at the Performance Days trade fair (from March 15-16 in Munich). Biofeel® Eleven is sourced from castor oil and is suitable for obtaining bio-polymer. It can be used for fabrics and fine garments in many sectors, from fashion to sports, from automotive to home textiles.

Today, 80% of the world's castor-oil plantations are in India, particularly in the Gujarat region, due to its favourable climatic conditions. In this area, local people can earn an additional income by cultivating semi-arid land that does not compete with food production, and by applying the skills they have acquired over time to this work. Over the years, thanks to research, development and innovation in the value chain, the seeds from which the oil is produced have been selected and certified to ensure the finest quality, also in terms of end uses.

Castor beans contain around 45% oil, rich in ricinolein, from which the bio-polymer polyamide 11 is derived. This is the polymer RadiciGroup uses for its Biofeel® Eleven yarn. What remains after the first pressing is a highly effective bio-fertiliser that is returned to the soil.

Biofeel® Eleven can also be solution dyed, i.e. dyed at the yarn production stage, saving a great deal of water and energy and also providing greater colour stability.

Source:

RadiciGroup

© Aid by Trade Foundation
16.03.2023

The GoodTextiles Foundation and Cotton made in Africa join forces again

  • Precious water for villages that are running on dry land

The GoodTextiles Foundation has worked to improve drinking water supplies in sub-Saharan Africa in another joint project with Cotton made in Africa (CmiA). In three villages in Togo particularly affected by climate change, the partners built wells and trained people in the use of water. The curriculum included the topics of disease prevention, hygiene and health care.

In 2016, the textile company Dibella (Bocholt) established the GoodTextiles Foundation with the aim of making textile value chains more sustainable. It raises funds and implements its own support projects to benefit people at all stages of the textile industry. Now the foundation has once again supported a project in sub-Saharan Africa initiated by Cotton made in Africa (Hamburg). Funding is being provided for three villages in Togo that, according to a needs assessment by CmiA's local partner, the cotton company Nouvelle Société Cotonnière du Togo (NSCT), have no direct access to drinking water.

  • Precious water for villages that are running on dry land

The GoodTextiles Foundation has worked to improve drinking water supplies in sub-Saharan Africa in another joint project with Cotton made in Africa (CmiA). In three villages in Togo particularly affected by climate change, the partners built wells and trained people in the use of water. The curriculum included the topics of disease prevention, hygiene and health care.

In 2016, the textile company Dibella (Bocholt) established the GoodTextiles Foundation with the aim of making textile value chains more sustainable. It raises funds and implements its own support projects to benefit people at all stages of the textile industry. Now the foundation has once again supported a project in sub-Saharan Africa initiated by Cotton made in Africa (Hamburg). Funding is being provided for three villages in Togo that, according to a needs assessment by CmiA's local partner, the cotton company Nouvelle Société Cotonnière du Togo (NSCT), have no direct access to drinking water.

Difficult water procurement
The areas where CmiA's drought-resistant cotton is grown include the north and interior of Togo, where cotton farmers are particularly affected by the effects of climate change due to prolonged periods of drought. Many village communities lack access to clean drinking water, and people draw contaminated water from more distant rivers or waterholes and carry the heavy load back with difficulty.

Guide to clean water
As part of a joint project between the GoodTextiles Foundation, Aid by Trade Foundation (holder of the CmiA standard) and NSCT, three drought-affected villages - Namare/Puob-n-kpaad, Tchokoroko and Aloba - will now receive their own water supply.

The funds - 11,756 euros will be provided by the GoodTextiles Foundation, and 4,419 euros will come from the Cotton Society - will be used to construct a well operated by hand pumps in each village. The construction work is to be completed by March 2023 and the 2,300 inhabitants will be taught the basics of water handling, disease prevention and hygiene measures in so-called WASH training courses.

Driving force: UN SDGs
For years, we have aligned our company with the UN's 17 Sustainable Development Goals (Global Goals for Sustainable Development). Through the sponsorship project, we are not only contributing to SDG 6 "Clean water and sanitation", but also to gender equality (SDG 5). In the African countries from which we source CmiA cotton, the physically strenuous task of procuring water is still the responsibility of women. The construction of the wells now leads to a significant improvement of their living situation," reports Ralf Hellmann, managing director of Dibella and chairman of the foundation.

Continued under their own responsibility
Once the wells have been handed over to the village communities, "water committees" will take over their management and maintenance, as well as responsibility for further hygiene training for the residents. The operation of the wells will be financed on the basis of a fund made up of small contributions from the beneficiary communities.

Source:

The GoodTextiles Foundation

(c) Digital Capability Center
15.03.2023

ITA Supports SMEs in Digitisation and Sustainability

The Institut für Textiltechnik (ITA) of RWTH Aachen University, as part of the Mittelstandzentrum 4.0 Kompetenzzentrum Textil vernetzt, has supported numerous small and medium-sized enterprises (SMEs) on their way to digitalisation over the last five years. At the Digital Capability Center (DCC) in Aachen, for example, SMEs were able to experience digitised production from yarn to smart bracelets and thus test the feasibility of Industry 4.0 solutions in their working environment.

New supply chain laws and social sustainability now pose current challenges for SMEs. In the follow-up project Mittelstand-Digital Zentrum Smarte Kreisläufe (SME Digital Centre Smart Cycles), ITA will be supporting SMEs from 1 March in implementing ideas for digitalisation and sustainability in concrete terms.

The Institut für Textiltechnik (ITA) of RWTH Aachen University, as part of the Mittelstandzentrum 4.0 Kompetenzzentrum Textil vernetzt, has supported numerous small and medium-sized enterprises (SMEs) on their way to digitalisation over the last five years. At the Digital Capability Center (DCC) in Aachen, for example, SMEs were able to experience digitised production from yarn to smart bracelets and thus test the feasibility of Industry 4.0 solutions in their working environment.

New supply chain laws and social sustainability now pose current challenges for SMEs. In the follow-up project Mittelstand-Digital Zentrum Smarte Kreisläufe (SME Digital Centre Smart Cycles), ITA will be supporting SMEs from 1 March in implementing ideas for digitalisation and sustainability in concrete terms.

This means finding sustainable solutions and processes for the circular economy together with companies and developing new digital business models. The ITA's solutions cover the areas of awareness-raising, qualification, implementation and networking. These offers are free of charge for SMEs - follow-up projects often lead to the funding programme "Central Innovation Programme for SMEs - ZIM" of the Federal Ministry of Economics and Climate Protection (BMWK) or to research and development projects.

Questions concerning the funding conditions can be sent to the following e-mail address: rosario.othen@ita.rwth-aachen.de.

Source:

Institut für Textiltechnik der RWTH Aachen University

(c) Schoeller Textil AG
10.03.2023

Schoeller Textil with new recycled textile collection at PERFORMANCE DAYS in Munich

Textile performance inspired by nature - Swiss textile manufacturer Schoeller Textil AG launches the sustainable textile collection RE-SOURCE as part of its brand sustainability strategy. All textile innovations in the collection are made from bio-based, post- as well as pre-consumer materials such as recycled polyester and spandex. These are further enhanced with Schoeller textile technologies to provide the wearer with breathability, thermal regulation and wind and water repellency.

Two textile innovations in the collection have been lined on the inside with natural NATIVA Merino wool, produced under the highest sustainability standards. The manufacturing process of NATIVA Merino wool is 100% transparent and traceable for consumers through blockchain technology. NATIVA farms worldwide meet strict social and environmental requirements for animal welfare (ban on mulesing), land management and ethical labour guidelines.

Textile performance inspired by nature - Swiss textile manufacturer Schoeller Textil AG launches the sustainable textile collection RE-SOURCE as part of its brand sustainability strategy. All textile innovations in the collection are made from bio-based, post- as well as pre-consumer materials such as recycled polyester and spandex. These are further enhanced with Schoeller textile technologies to provide the wearer with breathability, thermal regulation and wind and water repellency.

Two textile innovations in the collection have been lined on the inside with natural NATIVA Merino wool, produced under the highest sustainability standards. The manufacturing process of NATIVA Merino wool is 100% transparent and traceable for consumers through blockchain technology. NATIVA farms worldwide meet strict social and environmental requirements for animal welfare (ban on mulesing), land management and ethical labour guidelines.

Schoeller is committed to the CODE OF CONDUCT, which guarantees transparent production chains, environmental protection and fair working conditions. All RE-SOURCE textile innovations are bluesign approved - the international standard for responsible and sustainable textile manufacturing.

"The special Q-cycle process was used for RE-SOURCE. The resistant and durable Q-cycle polyamide is obtained by pyrolysis of used tyres and thus saves Co2 emissions compared to the combustion process. In this way, we are helping to protect the climate with Q-cycle," says Hans Kohn, COO, Schoeller Technologies AG.

The new recycled textile collection will be presented at the PERFORMANCE DAYS textile trade fair in Munich from 15-16 March 2023.

Source:

Schoeller Textil AG