From the Sector

Reset
57 results
08.03.2024

Final report of the World Pultrusion Conference 2024

The 17th World-Pultrusion-Conference (WPC) took place in Hamburg from 29 February to 1 March. Pultrusion, also known as the extrusion process, is a highly efficient method for producing fibre-reinforced plastic profiles for various applications in the construction/infrastructure and transport sectors.

A record number of almost 150 participants from all over the world attended the event. An international audience of experts from Europe and the USA, as well as China, India and Japan was represented.

The lecture programme with a total of 25 specialist lectures was strongly characterised by the topic of sustainability. The process development of thermoplastic pultrusion and applications in wind energy, solar panels, bridge construction and the automotive industry were also discussed at length. Despite the difficult market environment, many opportunities and possibilities for the pultrusion industry were presented.

The 17th World-Pultrusion-Conference (WPC) took place in Hamburg from 29 February to 1 March. Pultrusion, also known as the extrusion process, is a highly efficient method for producing fibre-reinforced plastic profiles for various applications in the construction/infrastructure and transport sectors.

A record number of almost 150 participants from all over the world attended the event. An international audience of experts from Europe and the USA, as well as China, India and Japan was represented.

The lecture programme with a total of 25 specialist lectures was strongly characterised by the topic of sustainability. The process development of thermoplastic pultrusion and applications in wind energy, solar panels, bridge construction and the automotive industry were also discussed at length. Despite the difficult market environment, many opportunities and possibilities for the pultrusion industry were presented.

The conference takes place every two years in a European country of importance to the pultrusion industry and is organised by AVK for the European Pultrusion Technology Association (EPTA), in cooperation with the American Composites Manufacturers Association (ACMA).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V / The European Pultrusion Technology Association (EPTA)

Composites production volume in Europe since 2011 (in kt) Graphik AVK – Industrievereinigung Verstärkte Kunststoffe e. V.
Composites production volume in Europe since 2011 (in kt)
06.03.2024

European composites market on the level of 2014

After a long phase of continuous growth, the composites market has seen strong fluctuations since 2018. In 2023, the overall market for composites in Europe fell by 8%.

The current mood on the markets in Germany and Europe is rather negative within the industry. The main drivers are the persistently high energy and raw material prices. Added to this are problems in logistics chains and a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are fueling the negative sentiment. Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its pre-2020 volume. The construction industry, the second key application area, is currently in crisis. These factors have already caused the Eu-ropean composites production volume to fall significantly in recent years. There has now been another decline in Europe for 2023.

After a long phase of continuous growth, the composites market has seen strong fluctuations since 2018. In 2023, the overall market for composites in Europe fell by 8%.

The current mood on the markets in Germany and Europe is rather negative within the industry. The main drivers are the persistently high energy and raw material prices. Added to this are problems in logistics chains and a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are fueling the negative sentiment. Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its pre-2020 volume. The construction industry, the second key application area, is currently in crisis. These factors have already caused the Eu-ropean composites production volume to fall significantly in recent years. There has now been another decline in Europe for 2023.

Overall development of the composites market
The volume of the global composites market totalled 13 million tons in 2023. Compared to 2022, with a volume of 12.3 million tons, growth was around 5%. In comparison, the European composites production volume fell by 8% in 2023. The total European composites market thus comprises a volume of 2,559 kilotons (kt) after 2,781 kt in 2022.

The market is therefore declining and falling back to the level of 2014. Overall, market momentum in Europe was lower than in the global market. Europe's share of the global market is now around 20%.

As in previous years, development within Europe is not uniform. The differences are due to very different regional core markets, the high variability of the materi-als used, a wide range of different manufacturing processes and widely differing areas of application. Accordingly, there are different regional trends, especially with regard to the individual processes, although there were declines in all re-gions and for almost all processes in 2023. At almost 50% of the market volume, the transportation sector accounts for the largest share of total composites pro-duction in terms of volume. The next two largest areas are the electri-cal/electronics sector and applications in construction and infrastructure.

The entire market report 2023 is available for download: https://www.avk-tv.de/publications.php.

Stoffstrombild Kunststoffe 2024: Start der Datenerhebung (c) bvse
05.03.2024

Stoffstrombild Kunststoffe 2024: Start der Datenerhebung

Ein Bündnis von Organisationen entlang der gesamten Kunststoff-Wertschöpfungskette, von den Herstellern, über die Anwender, bis hin zu der Recyclingbranche und den Industriegewerkschaften ruft seit 1997 alle zwei Jahre zur Teilnahme an der Studie "Stoffstrombild Kunststoffe" auf. Das Stoffstrombild Kunststoffe umfasst Daten zu Produktion, Verarbeitung, Verbrauch, Abfallaufkommen, Verwertung und Wiedereinsatz von Kunststoffen bis hin zum Wiedereinsatz der Recyclate in Deutschland. Das Stoffstrombild Kunststoffe genießt bei Politik, Behörden und Fachöffentlichkeit hohes Ansehen und zeigt, dass Kreislaufwirtschaft ein zentrales Thema für die deutsche Kunststoffbranche ist.

Die Ergebnisse des aktuellen Stoffstrombild Kunststoffe werden voraussichtlich im Oktober 2024 veröffentlicht. Teilnehmen können alle Unternehmen, die Kunststoffe herstellen, verarbeiten, für Endprodukte einsetzen sowie deren Abfälle sammeln und verwerten oder die dafür notwendigen Maschinen herstellen. Die Datenerhebung erfolgt anonymisiert durch die Conversio Market & Strategy GmbH.

Ein Bündnis von Organisationen entlang der gesamten Kunststoff-Wertschöpfungskette, von den Herstellern, über die Anwender, bis hin zu der Recyclingbranche und den Industriegewerkschaften ruft seit 1997 alle zwei Jahre zur Teilnahme an der Studie "Stoffstrombild Kunststoffe" auf. Das Stoffstrombild Kunststoffe umfasst Daten zu Produktion, Verarbeitung, Verbrauch, Abfallaufkommen, Verwertung und Wiedereinsatz von Kunststoffen bis hin zum Wiedereinsatz der Recyclate in Deutschland. Das Stoffstrombild Kunststoffe genießt bei Politik, Behörden und Fachöffentlichkeit hohes Ansehen und zeigt, dass Kreislaufwirtschaft ein zentrales Thema für die deutsche Kunststoffbranche ist.

Die Ergebnisse des aktuellen Stoffstrombild Kunststoffe werden voraussichtlich im Oktober 2024 veröffentlicht. Teilnehmen können alle Unternehmen, die Kunststoffe herstellen, verarbeiten, für Endprodukte einsetzen sowie deren Abfälle sammeln und verwerten oder die dafür notwendigen Maschinen herstellen. Die Datenerhebung erfolgt anonymisiert durch die Conversio Market & Strategy GmbH.

Für die Lebenswegbetrachtung wurden zuletzt mehr als 2.000 Unternehmen aus Kunststofferzeugung, -verarbeitung und -verwertung befragt sowie amtliche und weitere Statistiken herangezogen. Um auch in diesem Jahr wieder eine hohe Abdeckung zu erreichen, werden in Kürze wieder Fragebögen versandt, Telefoninterviews geführt sowie Untersuchungen und Recherchen gestartet.

Das Stoffstrombild wird von der Conversio Market & Strategy GmbH erstellt. Auftraggeber der Studie ist die BKV GmbH mit Unterstützung von PlasticsEurope Deutschland e. V., der Bundesverband der Deutschen Entsorgungs-, Wasser- und Kreislaufwirtschaft e. V., der bvse-Bundesverband Sekundärrohstoffe und Entsorgung e. V., VDMA e.V. Kunststoff und Gummimaschinen, die IK – Industrievereinigung Kunststoffverpackungen e. V., der KRV – Kunststoffrohrverband e. V., VinylPlus Deutschland e.V., der GKV – Gesamtverband Kunststoffverarbeitende Industrie e. V. AVK – Industrievereinigung Verstärkte Kunststoffe e. V., FSK – Fachverband Schaumkunststoffe und Polyurethane e.V., TecPart – Verband Technische Kunststoff-Produkte e. V., pro-K Industrieverband langlebige Kunststoffprodukte und Mehrwegsysteme e. V., der IG BCE Industriegewerkschaft Bergbau, Chemie, Energie, sowie dem VCI – Verband der Chemischen Industrie e.V.

Source:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung e. V.

Fraunhofer CCPE Positionspapier »Challenges and requirements in comparative life cycle assessment of plastics recycling« Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE
Fraunhofer CCPE Positionspapier »Challenges and requirements in comparative life cycle assessment of plastics recycling«
06.02.2024

Transparente Ökobilanzierung des Kunststoffrecyclings

Ökobilanzierungen dienen oftmals als Entscheidungsgrundlage für die Auswahl von umweltfreundlichen Verfahren, Einsatzstoffen oder Dienstleistungen beim Kunststoffrecycling. Doch wie sieht eine vergleichbare und transparente ökologische Bewertung aus, die unterschiedlichen Ansprüchen gerecht wird? Fraunhofer CCPE Forschende haben zehn Herausforderungen und zehn Anforderungen herausgearbeitet, die Vergleichbarkeit und Transparenz bei der ökologischen Bewertung des Kunststoffrecycling erhöhen.

Ökobilanzierungen dienen oftmals als Entscheidungsgrundlage für die Auswahl von umweltfreundlichen Verfahren, Einsatzstoffen oder Dienstleistungen beim Kunststoffrecycling. Doch wie sieht eine vergleichbare und transparente ökologische Bewertung aus, die unterschiedlichen Ansprüchen gerecht wird? Fraunhofer CCPE Forschende haben zehn Herausforderungen und zehn Anforderungen herausgearbeitet, die Vergleichbarkeit und Transparenz bei der ökologischen Bewertung des Kunststoffrecycling erhöhen.

Mit Ökobilanzstudien lassen sich nicht nur Produkte und Dienstleistungen über ihren gesamten Lebenszyklus hinweg bewerten, sondern es können auch verschiedene Recyclingverfahren und recycelter Kunststoff mit Neuware verglichen werden. Die Ergebnisse dienen als Entscheidungsgrundlage bei der Auswahl der Optionen mit den geringsten Umweltwirkungen. Die grundlegende Vergleichsgröße in jeder Ökobilanz ist die funktionelle Einheit. Alle Umweltwirkungen werden auf diese Größe bezogen. Das Recycling von Kunststoffen erfüllt immer mehrere Funktionen wie die ordnungsgemäße Behandlung von Abfällen und die Bereitstellung neuer Ressourcen für weitere Produkte. Der Umgang mit dieser Multifunktionalität in der Ökobilanzierung des Recyclings wird seit langem ohne Konsens diskutiert.

Die Fraunhofer CCPE-Forschenden möchten mit ihrem gerade erschienenen Positionspapier diese Herausforderungen und Anforderungen verdeutlichen, die bei der Bewertung und dem Vergleich von Kunststoffrecyclingaktivitäten bestehen. Der Fokus liegt auf der Unterscheidung zwischen den Funktionalitäten der Abfallbehandlung und Materialbereitstellung. »Wir wollen mit dem Positionspapier Raum für einen offenen und transparenten Austausch zwischen Wissenschaft, Industrie und Politik eröffnen, um Entscheidungen auf Basis des ökologischen Vergleichs verständlich und belastbar zu gestalten«, so Anna Kerps, Initiatorin des Positionspapiers und wissenschaftliche Mitarbeiterin des Fraunhofer CCPE.

Die Autor*innen weisen darauf hin, dass vergleichende Ökobilanzen zudem von verschiedenen Randbedingungen und Annahmen abhängen. Die Prüfung logischer Widersprüche in den Annahmen ist eine Hauptanforderung für aussagekräftige Vergleiche. Inkonsistente Ökobilanzstudien führen oft zu Fehlinterpretationen. Weitere Herausforderungen sehen sie im Umgang mit den verschiedenen Technologierouten und -skalen sowie der Komplexität von Recyclingrouten gemischter Abfälle. Unterschiedliche Abfallherkünfte und mitgesammelte Störstoffe beeinflussen die Qualität der Rezyklate – und müssen in der Bilanzierung berücksichtigt werden.

Weiterhin ist es auf methodischer Ebene wichtig, Modellierungsansätze in Bezug auf Multifunktionalität und Systemgrenzen zu verbessern. Der Vergleich verschiedener Recyclingverfahren und von Neuware mit Rezyklat ist herausfordernd, da sie unterschiedliche Funktionalitäten haben. Insgesamt fehlt es bisher an einem methodischen Konsens, um robuste und vergleichbare Ökobilanz-Ergebnisse zu erhalten.

Source:

Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE

Gear Aid: Reparatur-Patches für Outdoor-Ausrüstung (c) Gear Aid
22.01.2024

Gear Aid: Reparatur-Patches für Outdoor-Ausrüstung

Egal, ob beim Campen, Wandern oder Bergsteigen, beim Wasser-, Reit- und Jagdsport, beim Skifahren oder einem Bootstrip – die neuen Hex-Patches von Gear Aid verlängern die Lebensdauer von Outdoor-Ausrüstung.

Die neuen Hex Patches sind aufgrund ihrer achteckigen Form vielseitig kombinierbar – je nach Größe und Form der Reparaturstelle, und verhindern ein weiteres Einreißen. Es sind weder Nähkenntnisse noch Hitze erforderlich; einfach die Schutzfolie abziehen, den selbstklebenden Patch auf der Reparaturstelle anbringen und kurz andrücken. Der Klebstoff repariert dauerhaft Outdoor-Materialien wie Nylon, Vinyl, Gummi, Kunststoff u.v.m.

Somit lassen sich die Hex Patches zur einfachen und schnellen Reparatur von Jacken und Hosen aller Art, Regen- und Skibekleidung, Rucksäcken, Zelten, Schlafsäcken, Matten, Unterlagen, Planen leichten Ausrüstungsgeständen usw. verwenden. Sie bestehen aus leichtem 70D-Gewebe und sind mit einer wasserfesten Beschichtung versiegelt, die auch häufigem Waschen standhält.

Egal, ob beim Campen, Wandern oder Bergsteigen, beim Wasser-, Reit- und Jagdsport, beim Skifahren oder einem Bootstrip – die neuen Hex-Patches von Gear Aid verlängern die Lebensdauer von Outdoor-Ausrüstung.

Die neuen Hex Patches sind aufgrund ihrer achteckigen Form vielseitig kombinierbar – je nach Größe und Form der Reparaturstelle, und verhindern ein weiteres Einreißen. Es sind weder Nähkenntnisse noch Hitze erforderlich; einfach die Schutzfolie abziehen, den selbstklebenden Patch auf der Reparaturstelle anbringen und kurz andrücken. Der Klebstoff repariert dauerhaft Outdoor-Materialien wie Nylon, Vinyl, Gummi, Kunststoff u.v.m.

Somit lassen sich die Hex Patches zur einfachen und schnellen Reparatur von Jacken und Hosen aller Art, Regen- und Skibekleidung, Rucksäcken, Zelten, Schlafsäcken, Matten, Unterlagen, Planen leichten Ausrüstungsgeständen usw. verwenden. Sie bestehen aus leichtem 70D-Gewebe und sind mit einer wasserfesten Beschichtung versiegelt, die auch häufigem Waschen standhält.

22.01.2024

bvse: Ab 2025 Energiebeihilfen für Kunststoffrecyclingunternehmen

Kunststoffrecyclingunternehmen können ab dem 1. Januar 2025 wieder Energiebeihilfen beantragen. Das teilte der bvse-Bundesverband Sekundärrohstoffe und Entsorgung in einem Mitgliederrundschreiben mit.

Nach den Erläuterungen fallen unter den förderungsfähigen Wirtschaftszweig 20.16 (Herstellung von Kunststoffen in Primärform) nun auch folgende Tätigkeiten der Kunststoffrecyclingbranche:

Kunststoffrecyclingunternehmen können ab dem 1. Januar 2025 wieder Energiebeihilfen beantragen. Das teilte der bvse-Bundesverband Sekundärrohstoffe und Entsorgung in einem Mitgliederrundschreiben mit.

Nach den Erläuterungen fallen unter den förderungsfähigen Wirtschaftszweig 20.16 (Herstellung von Kunststoffen in Primärform) nun auch folgende Tätigkeiten der Kunststoffrecyclingbranche:

  • Herstellung von Zellulose und ihren chemischen Derivaten,
  • Herstellung von Kunstpulvern, -granulaten oder -flocken durch Compoundieren oder Umwandeln von Kunststoffharzen sowie aus wiedergewonnen Kunststoffabfällen,
  • Herstellung von recyceltem Kunststoff in Flakes oder Kunststoffgranulaten auf Basis von vorbehandelten Kunststoffabfällen durch stoffliche Verwertungsverfahren.

Wie die bvse-Justiziarin Annette Reber erläuterte, hat die Klassifikation der Wirtschaftszweige neben statistischen Zwecken auch eine wichtige Bedeutung für die Bewilligung von Energiebeihilfen. Staatliche Energiebeihilfen dürfen, so Reber, nur den Unternehmen bewilligt werden, die zu den in den europäischen Leitlinien für staatliche Klima-, Umweltschutz- und Energiebeihilfen 2022 (KUEBLL) aufgeführten Wirtschaftszweigen gehören. Der Wirtschaftszweig 20.16. (Herstellung von Kunststoffen in Primärform) wird als förderungsfähig angesehen, der Wirtschaftszweig 38.31 (Rückgewinnung sortierter Werkstoffe) hingegen nicht.

Source:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung e.V.

19.01.2024

AVK-Innovationspreis 2024 - Einreichungen ab sofort möglich

Die AVK sucht die besten Innovationen im Bereich Faserverstärkte Kunststoffe (FVK) / Composites und bittet um Bewerbungen zum AVK Innovationspreis 2024 im Bereich Faserverstärkter Kunststoffe (FVK) / Composites in folgenden Kategorien:

  • Innovative Produkte/Bauteile bzw. Anwendungen
  • Innovative Prozesse bzw. Verfahren
  • Forschung und Wissenschaft

Ziel des Innovationspreises ist die Förderung neuer Produkte/Bauteile bzw. Anwendungen aus faserverstärkten Kunststoffen (FVK) sowie die Förderung neuer Verfahren bzw. Prozesse zur Herstellung dieser FVK-Produkte. Ein weiterer Preis geht an Universitäten, Hochschulen und Institute für herausragende wissenschaftliche Arbeiten in Forschung und Wissenschaft. In allen Kategorien wird besonderer Wert auf das Thema „Nachhaltigkeit“ gelegt. Ein wichtiges Ziel ist es, die Innovationen sowie die dahinterstehenden Firmen/Institutionen auszuzeichnen und so die Leistungsfähigkeit der gesamten Composites-Industrie öffentlichkeitswirksam darzustellen. Bewertet werden die Einreichungen von einer Experten-Jury aus dem Composites-Bereich.

Die AVK sucht die besten Innovationen im Bereich Faserverstärkte Kunststoffe (FVK) / Composites und bittet um Bewerbungen zum AVK Innovationspreis 2024 im Bereich Faserverstärkter Kunststoffe (FVK) / Composites in folgenden Kategorien:

  • Innovative Produkte/Bauteile bzw. Anwendungen
  • Innovative Prozesse bzw. Verfahren
  • Forschung und Wissenschaft

Ziel des Innovationspreises ist die Förderung neuer Produkte/Bauteile bzw. Anwendungen aus faserverstärkten Kunststoffen (FVK) sowie die Förderung neuer Verfahren bzw. Prozesse zur Herstellung dieser FVK-Produkte. Ein weiterer Preis geht an Universitäten, Hochschulen und Institute für herausragende wissenschaftliche Arbeiten in Forschung und Wissenschaft. In allen Kategorien wird besonderer Wert auf das Thema „Nachhaltigkeit“ gelegt. Ein wichtiges Ziel ist es, die Innovationen sowie die dahinterstehenden Firmen/Institutionen auszuzeichnen und so die Leistungsfähigkeit der gesamten Composites-Industrie öffentlichkeitswirksam darzustellen. Bewertet werden die Einreichungen von einer Experten-Jury aus dem Composites-Bereich.

Die Preisverleihung findet am 22. Oktober 2024 während des JEC Forum DACH in Stuttgart (22.-23.10.2024) statt.

Der Einsendeschluss für die Bewerbungsunterlagen ist der 28. März 2024. Nähere Angaben und Bewertungskriterien unter: https://www.avk-tv.de/innovationaward.php

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right © AVK
Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right
23.11.2023

CarboScreen: Sensor monitoring for complex carbon fibre production

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

The production of carbon fibres is highly complex. In the current state of the art, however, the manufacturing process is only monitored manually by semi-skilled workers. However, even minimal fibre damage during production leads to a reduction in the quality of the carbon fibre. In extreme cases, it can also lead to plant fires. To ensure production quality, the production speed is currently limited to a maximum of 15 m/min. In fact, the production speed of the systems could be higher. The sensor-based online monitoring of Carbo-Screen makes it possible to increase the production speed to 30 m/min in the medium term. As a result of the increased production volume per system, the specific production costs of the carbon fibre are reduced, which can result in lower prices.

A reduced sales price would make it possible to use carbon fibres and their composite materials even more widely in traditional markets such as aerospace technology and wind energy, as well as for mass production in the automotive industry.

The CarboScreen online monitoring system is currently being developed for industrial use. It is to be validated at an industrial plant in 2024. CarboScreen GmbH was founded as part of EXIST funding and offers AI-supported sensor systems for carbon fibre production. The sensor technology continuously monitors the fibre throughout the entire production process. Deviations are detected automatically.

The winners of the AVK Innovation Award are honoured annually by the AVK Industrievereinigung Verstärkte Kunststoffe. Companies, institutes and their partners are honoured in three categories: products and applications, processes and procedures, and research and science.

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
14.11.2023

Successful SMCCreate 2023 Design Conference in Prague

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

As an introduction, speakers - including CTC/Airbus and Teijin - presented different possible applications for SMC and BMC components, including aircraft interiors, bicycle boxes, and applications in e-mobility. The topic of sustainability was broadly covered, highlighting recycling solutions and experiences (Siemens, IDI, OC, AOC), the use of renewable raw materials, as well new LCA models developed by the SMC BMC Alliance (LCS),

Specifically for designers, the use of the SMC flow and curing modelling was presented (ESI, OC), SMC positioning vs. aluminium (Spartners). The second day concluded with contributions on process optimization options for component production, including speeches by Dieffenbacher, Netzsch and EBG.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

12.09.2023

Neues AVK-Seminar zur Prozesssimulation für Faserverbund-Kunststoffe

Die AVK – Industrievereinigung Verstärkte Kunststoffe e. V. bietet ab Dezember 2023 ein neues Seminar zur Prozesssimulation für Faserverbund-Kunststoffe an.

Prozesssimulation ist in vielen Industriebereichen nicht mehr wegzudenken und bietet auch für Faserverbundkunststoffe (FVK) enormes Potenzial. Moderne Prozesssimulationen fördern das Prozessverständnis und unterstützen die Prozess- und Werkzeugauslegung.

Die komplexen physikalischen Vorgänge, die aus der speziellen werkstofflichen Zusammensetzung von FVK resultieren, sind dabei eine Herausforderung. Die zielorientierte Auswahl und Anwendung von Simulationstechnologien erfordert ein Grundverständnis für die FVK-spezifischen Besonderheiten.

Die AVK – Industrievereinigung Verstärkte Kunststoffe e. V. bietet ab Dezember 2023 ein neues Seminar zur Prozesssimulation für Faserverbund-Kunststoffe an.

Prozesssimulation ist in vielen Industriebereichen nicht mehr wegzudenken und bietet auch für Faserverbundkunststoffe (FVK) enormes Potenzial. Moderne Prozesssimulationen fördern das Prozessverständnis und unterstützen die Prozess- und Werkzeugauslegung.

Die komplexen physikalischen Vorgänge, die aus der speziellen werkstofflichen Zusammensetzung von FVK resultieren, sind dabei eine Herausforderung. Die zielorientierte Auswahl und Anwendung von Simulationstechnologien erfordert ein Grundverständnis für die FVK-spezifischen Besonderheiten.

Das Seminar, das vom Simulations-Experten Dr. Miro Duhovic vom Leibniz-Institut für Verbundwerkstoffe in Kaiserslautern geleitet wird, bietet mit der grundsätzlichen Einführung in die Simulationsgrundlagen einen Einblick in die sich rasant entwickelnden Simulationsmöglichkeiten, aber auch -limitationen sowie gängige Anwendungsfälle und Aspekte der Eingangsdatengenerierung. Es wird die gesamte Bandbreite der Herstellprozesssimulationen betrachtet und am Beispiel der Resin-Transfer-Molding-Technologie ein detaillierter Einblick geboten, wobei die Teilnehmer selbst aktiv werden und ein erstes Simulations­modell mit einer Open-Source-Simulationssoftware erstellen und berechnen können.

Das erste Seminar zur Prozesssimulation findet am 5. Dezember 2023 in der AVK-Geschäftsstelle statt.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

11.08.2023

SMCCreate 2023: Programm released

The 2nd edition of the SMCCreate conference jointly organized by the AVK and the European Alliance for SMC BMC takes place from 7-8-November 2023 in Prague, Czech Republic. The conference programme has now been published.

Within the time of only 1.5 day and 16 lectures, the SMCCreate 2023 conference will again cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability. The participants can expect presentations from the following top-class companies: Airbus, AOC, BYK-Chemie Dieffenbacher, EBG Group, ESI Germany, Fraunhofer, IDI, Mitras, Netzsch, Owens Corning, Siemens and Teijin.

The SMCCreate 2023 will take place from November 7-8, 2023 in Prague (Czech Republic) at the Vienna House Diplomat Prague.

The 2nd edition of the SMCCreate conference jointly organized by the AVK and the European Alliance for SMC BMC takes place from 7-8-November 2023 in Prague, Czech Republic. The conference programme has now been published.

Within the time of only 1.5 day and 16 lectures, the SMCCreate 2023 conference will again cover a wide range of subjects, all relevant for designers in their selection of materials solutions that provide performance, cost efficiency, manufacturing ability and sustainability. The participants can expect presentations from the following top-class companies: Airbus, AOC, BYK-Chemie Dieffenbacher, EBG Group, ESI Germany, Fraunhofer, IDI, Mitras, Netzsch, Owens Corning, Siemens and Teijin.

The SMCCreate 2023 will take place from November 7-8, 2023 in Prague (Czech Republic) at the Vienna House Diplomat Prague.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) EREMA
Manfred Hackl, CEO EREMA Group and Markus Huber-Lindinger, Managing Director EREMA, open the EREMA Discovery Day 2023
09.06.2023

EREMA Discovery Day as meeting place for plastics and recycling industry

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

"This wide range of technologies is necessary because the recycling process each of our customers choose depends on the type of plastic, the level of contamination of the input material, and which product will be made using the recycled pellets. Following the expansion of our Ansfelden site and with the new site nearby in St. Marien, we can now demonstrate all these processes, carry out test runs with customers' material and focus on development work independently of our Customer Centre," says EREMA's Managing Director Markus Huber-Lindinger.

EREMA is driving forward research and development work in the company's new R&D Centre. Two halls with a total area of 1,550 square metres and a new office building offering space for 50 workplaces has been built. Here, the company bundles cross-departmental test machines and laboratory facilities for post consumer and inhouse recycling applications. R&D is decentralised at EREMA. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology - all with the aim of meeting customer requirements and achieving the highest possible quality of recycled pellets.  

On the evening before Discovery Day, EREMA celebrated its 40th anniversary together with customers and partners. A review covered the company's history - from the first workshop in a garage in 1983, to its position today as a innovation pioneer and one of the market leaders.

More information:
EREMA plastics Recycling
Source:

EREMA Group

(c) TNO/Fraunhofer UMSICHT
02.06.2023

Fraunhofer: New guide to the future of plastics

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

Versatile and inexpensive materials with low weight and very good barrier properties: That's what plastics are. In addition to their practical benefits, however, the materials are also associated with a significant share of mankind's greenhouse gas emissions. The production and use of plastics cause environmental pollution and microplastics, deplete fossil resources and lead to import dependencies. At the same time, alternatives - such as glass packaging - could cause even more environmental burden or have poorer product properties.

Researchers from TNO and Fraunhofer UMSICHT have elaborated a white paper that provides a basis for the transformation of plastics production and use. They consider the integration of the perspectives of all stakeholders and their values and the potential of current and future technologies. In addition, the functional properties of the target product, the comparison with alternative products without plastics, and their impact in a variety of environmental, social and economic categories over the entire life cycle are crucial. In this way, a systematic assessment and ultimately a systematic decision as to where we can use, reject or replace plastics can be realized.

Strategies for the Circular Economy
As a result, the researchers describe four strategic approaches for transforming today's largely linear plastics economy into a fully circular future: Narrowing the Loop, Operating the Loop, Slowing the Loop, and Closing the Loop. By Narrowing the Loop, the researchers recommend, as a first step, to reduce the amount of materials mobilized in a circular economy. Operating the Loop refers to using renewable energy, minimizing material losses, and sourcing raw materials sustainably. For Slowing the Loop, measures are needed to extend the useful lifetime of materials and products. Finally, for Closing the Loop, plastics must be collected, sorted and recycled to high standards.

Individual strategies fall under each of the four approaches. While the ones under Operating the Loop (O strategies) should be applied in parallel and as completely as possible. According to the researchers, the decision for the strategies in the other fields (R strategies) requires a complex process: “Usually, more than one R-strategy can be considered for a given product or service. These must be carefully compared in terms of their feasibility and impact in the context of the status quo and expected changes”, explains Jürgen Bertling from Fraunhofer UMSICHT. The project partners have therefore developed a guiding principle for prioritization based on the idea of the waste hierarchy.

A holistic change, as we envision it, can only succeed if science, industry, politics and citizens work together across sectors. “This implies several, partly quite drastic changes at 4 levels: legislation and policy, circular chain collaboration, design and development, and education and information. For instance, innovations in design and development include redesign of polymers to more oxygen rich ones based on biomass and CO2 utilisation. Current recycling technologies have to be improved for high quantity and quality recycling,” explains Jan Harm Urbanus from TNO.

Hands-on platform for cross-sector collaboration
“Therefore, in a next step, TNO and Fraunhofer UMSICHT are building a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP," explains Esther van den Beuken, Principal Consultant from TNO. It will give companies, associations and non-governmental organizations the opportunity to work together on existing barriers and promising solutions for a Circular Plastics Economy. The platform will also offer its members regular hands-on workshops on plastics topics, roundtable discussions on current issues, and participation in multi-client studies on pressing technical challenges. Regular meetings will be held in the cross-border region of Germany and the Netherlands as well as online. The goal is to bring change to the public and industry.

Source:

Fraunhofer UMSICHT

Photo: AVK
26.05.2023

AVK: Successful Flame Retardancy Conference in Berlin

  • Flame Retardancy for Composites Applications in the Transport Sector

On 10-11 May 2023, the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin organised for the first time an international, English-language conference on flame retardancy.

In 18 compact lectures, more than 20 experts informed nearly 80 participants about new developments, requirements and innovations regarding specific flame retardant properties of components made of fibre-reinforced plastics/composites for the transport sector.

Among others, there were presentations by industry representatives from Saertex, BÜFA, Clariant, Diehl Aviation and Airbus, but also from institutes such as the Fraunhofer Institutes or the Federal Institute for Materials Research and Testing. Presentations on the topics of standardisation, raw materials, automotive or recycling were on the agenda, but also flame retardants for connectors and battery housings for electric vehicles or fire-retardant systems for rail vehicles or fire-retardant CFRP made from recycled CF nonwoven were presented.

  • Flame Retardancy for Composites Applications in the Transport Sector

On 10-11 May 2023, the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin organised for the first time an international, English-language conference on flame retardancy.

In 18 compact lectures, more than 20 experts informed nearly 80 participants about new developments, requirements and innovations regarding specific flame retardant properties of components made of fibre-reinforced plastics/composites for the transport sector.

Among others, there were presentations by industry representatives from Saertex, BÜFA, Clariant, Diehl Aviation and Airbus, but also from institutes such as the Fraunhofer Institutes or the Federal Institute for Materials Research and Testing. Presentations on the topics of standardisation, raw materials, automotive or recycling were on the agenda, but also flame retardants for connectors and battery housings for electric vehicles or fire-retardant systems for rail vehicles or fire-retardant CFRP made from recycled CF nonwoven were presented.

More information:
AVK Composites flame retardant
Source:

AVK

05.05.2023

SMCCreate 2023 findet im November statt

Die European Alliance for SMC BMC und der AVK-Expertenarbeitskreis SMC/BMC organisieren erneut die SMCCreate, eine Konferenz über Design mit SMC- und BMC-Verbundwerkstoffen. Diese Konferenz bietet Einblicke in den gesamten Produktdesignprozess von der Idee bis zur Herstellung des Teils und richtet sich sowohl an erfahrene Designer als auch an Designer, die diese vielseitigen Materialien zum ersten Mal einsetzen.

SMC und BMC sind Faserverbundwerkstoffe, sie eignen sich für die Herstellung leichter und komplexer Bauteile, weil sie die strukturellen Eigenschaften mit einer glatten Oberfläche kombinieren. Aus diesem Grund werden SMC und BMC zunehmend in einem breiten Spektrum von Endanwendungen und Märkten eingesetzt.

Die European Alliance for SMC BMC und der AVK-Expertenarbeitskreis SMC/BMC organisieren erneut die SMCCreate, eine Konferenz über Design mit SMC- und BMC-Verbundwerkstoffen. Diese Konferenz bietet Einblicke in den gesamten Produktdesignprozess von der Idee bis zur Herstellung des Teils und richtet sich sowohl an erfahrene Designer als auch an Designer, die diese vielseitigen Materialien zum ersten Mal einsetzen.

SMC und BMC sind Faserverbundwerkstoffe, sie eignen sich für die Herstellung leichter und komplexer Bauteile, weil sie die strukturellen Eigenschaften mit einer glatten Oberfläche kombinieren. Aus diesem Grund werden SMC und BMC zunehmend in einem breiten Spektrum von Endanwendungen und Märkten eingesetzt.

Verwendung von SMC BMC in Ihrem Bauteilentwurf
Innerhalb von anderthalb Tagen wird die SMCCreate-Konferenz ein große Vielfalt an Themen abdecken, die für Konstrukteure bei der Auswahl von Materiallösungen relevant sind, die Leistung, Kosteneffizienz, Fertigungsfähigkeit und Nachhaltigkeit bieten. Präsentationen der folgenden Unternehmen/Institute sind bereits bestätigt worden: AOC, ESI Deutschland, Fraunhofer, IDI, Mitras, Owens Corning und Siemens.

Die SMCCreate 2023 wird vom 7. bis 8. November 2023 in Prag (Tschechische Republik) im Vienna House by Wyndham Diplomat Prague stattfinden.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

03.05.2023

ANDRITZ starts up needleloom at Foss Floors

International technology group ANDRITZ has successfully started up the new velour loom it delivered to Foss Floors, Rome, United States (GA). The loom produces flooring from recycled plastic for a wide range of applications. Start-up took place in early 2023.

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, with a full range of needling technologies, including velour equipment, which allows customers to address a variety of applications such as automotive, household, flooring, acoustics, geotextiles, filtration, and synthetic leather.

Foss Floors is a leader in needlepunched felt products in North America. Its facilities are located in Rome and Chatsworth, Georgia, and it distributes a vast array of flooring products worldwide. One of the company’s key strengths is its agility for product diversification to satisfy customer needs. Foss Floors also strongly expresses its unwavering commitment to environmentally sustainable manufacturing.´

International technology group ANDRITZ has successfully started up the new velour loom it delivered to Foss Floors, Rome, United States (GA). The loom produces flooring from recycled plastic for a wide range of applications. Start-up took place in early 2023.

ANDRITZ is one of the global market leaders for supply of nonwoven production technologies, with a full range of needling technologies, including velour equipment, which allows customers to address a variety of applications such as automotive, household, flooring, acoustics, geotextiles, filtration, and synthetic leather.

Foss Floors is a leader in needlepunched felt products in North America. Its facilities are located in Rome and Chatsworth, Georgia, and it distributes a vast array of flooring products worldwide. One of the company’s key strengths is its agility for product diversification to satisfy customer needs. Foss Floors also strongly expresses its unwavering commitment to environmentally sustainable manufacturing.´

Source:

ANDRITZ AG

09.02.2023

AVK Innovation Award 2023 – Submissions until 14 April

The The German Federation of Reinforced Plastics (AVK) is looking for the best innovations in the field of fibre-reinforced plastics (FRP) / composites covering the following categories:

  • Innovative products/components or applications
  • Innovative procedures/processes
  • Research and science

One goal of the AVK Innovation Award is to promote new products/components and applications made from fibre-reinforced plastics (FRP) and to promote new processes and methods for the manufacturing of FRP products. A further award is given to universities, colleges and institutes for outstanding work in science and research. In each of the categories special emphasis will be placed on the issue of sustainability.

Another goal is to give prominence to the innovations and also to the companies/institutions behind them, thus publicising their performance throughout the industry. The submissions will be evaluated by a jury of experts from the composites sector. The award ceremony will be held during the JEC Forum DACH event in Salzburg, Austria (24-25 October 2023).

The The German Federation of Reinforced Plastics (AVK) is looking for the best innovations in the field of fibre-reinforced plastics (FRP) / composites covering the following categories:

  • Innovative products/components or applications
  • Innovative procedures/processes
  • Research and science

One goal of the AVK Innovation Award is to promote new products/components and applications made from fibre-reinforced plastics (FRP) and to promote new processes and methods for the manufacturing of FRP products. A further award is given to universities, colleges and institutes for outstanding work in science and research. In each of the categories special emphasis will be placed on the issue of sustainability.

Another goal is to give prominence to the innovations and also to the companies/institutions behind them, thus publicising their performance throughout the industry. The submissions will be evaluated by a jury of experts from the composites sector. The award ceremony will be held during the JEC Forum DACH event in Salzburg, Austria (24-25 October 2023).

The submission deadline for the application documents is 14th April 2023.
Further details and assessment criteria can be found online.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

27.01.2023

SMCCREATE 2023: Call for Speakers

The AVK Working Group SMC/BMC and the European Alliance for SMC BMC are jointly organising SMCCreate 2023 - a conference on designing with SMC and BMC composites. The event, which offers insights into the entire product design process from idea to part manufacture, is aimed at both experienced designers and those new to the use of these materials.

Around 60 participants from all over Europe attended the first SMCCreate design conference, which took place in Antwerp in June 2022. SMCCREATE 2023 will take place in Prague (Czech Republic) on 7-8 November 2023 at the Vienna House by Wyndham Diplomat Prague; conference language is English. After a successful launch, AVK and the European Alliance for SMC BMC are looking forward to the second edition of the event and invite speakers to apply with their presentation proposals by 27 February. (Mail address: info@avk-tv.de).

The AVK Working Group SMC/BMC and the European Alliance for SMC BMC are jointly organising SMCCreate 2023 - a conference on designing with SMC and BMC composites. The event, which offers insights into the entire product design process from idea to part manufacture, is aimed at both experienced designers and those new to the use of these materials.

Around 60 participants from all over Europe attended the first SMCCreate design conference, which took place in Antwerp in June 2022. SMCCREATE 2023 will take place in Prague (Czech Republic) on 7-8 November 2023 at the Vienna House by Wyndham Diplomat Prague; conference language is English. After a successful launch, AVK and the European Alliance for SMC BMC are looking forward to the second edition of the event and invite speakers to apply with their presentation proposals by 27 February. (Mail address: info@avk-tv.de).

The aim of the conference is to help designers and engineers choose the best material solution for their applications. Presentations will focus on best practices and industrial solutions, SMC and BMC component manufacturing, material selection and product development throughout the product life cycle, from design to sustainability.

(Mail address: info@avk-tv.de).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
13.01.2023

AVK veröffentlicht Composites-Recycling-Studie

Die AVK – Industrievereinigung Verstärkte Kunststoffe e. V. hat gemeinsam mit dem IKK, Institut für Kunststoff und Kreislaufwirtschaft der Leibniz-Universität Hannover, eine umfassende Studie zum Composites-Recycling erarbeitet.

Sie bietet eine systematische und umfassende Übersicht über die anfallenden Abfallmengen und die aktuellen sowie zukünftig verfüg- und umsetzbaren Lösungen zum hochwertigen Recycling. Dabei werden die Vor- und Nachteile zu den verschiedenen Verfahren bewertet sowie relevante gesetzliche Vorgaben und Normen betrachtet.

Die AVK – Industrievereinigung Verstärkte Kunststoffe e. V. hat gemeinsam mit dem IKK, Institut für Kunststoff und Kreislaufwirtschaft der Leibniz-Universität Hannover, eine umfassende Studie zum Composites-Recycling erarbeitet.

Sie bietet eine systematische und umfassende Übersicht über die anfallenden Abfallmengen und die aktuellen sowie zukünftig verfüg- und umsetzbaren Lösungen zum hochwertigen Recycling. Dabei werden die Vor- und Nachteile zu den verschiedenen Verfahren bewertet sowie relevante gesetzliche Vorgaben und Normen betrachtet.

Das Thema Nachhaltigkeit und Recycling ist auch in der Kunststoffindustrie immer wichtiger geworden. Gerade im Bereich Leichtbau haben Composites enorme Vorteile. Darüber hinaus können die Materialien aber auch in Bezug auf Nachhaltigkeit einen hohen Mehrwert liefern. Warum Composites vorteilhaft sind, wurde bislang wenig systematisch oder eher punktuell untersucht. Mit der jetzt veröffentlichten Composites-Recycling-Studie, die vom IKK-Institutsleiter Professor Hans-Josef Endres und Dr. Madina Shamsuyeva mit Unterstützung von Industrievertretern aus dem AVK-Expertenarbeitskreis erarbeitet wurde, liegt die erste große Untersuchung zum Thema Recycling von Composites vor.

„Für Composites gibt es ein hohes Potential, auch wenn viele glauben, Faserverbundkunststoffe lassen sich schwer recyclen. Trotzdem darf man nicht vergessen, dass nicht alles, was beim Recycling möglich ist, auch wirtschaftlich oder nachhaltig ist. Hier gilt es genau hinzusehen. Diese Studie ist deshalb so wichtig, um herauszufinden, wie der aktuelle Stand ist, wohin sich der Markt entwickeln kann und wo noch Potential schlummert“, stellt AVK-Geschäftsführer Dr. Elmar Witten fest.

Prof. Hans-Josef Endres ergänzt: „Die Studie zeigt, dass in einigen Bereichen mehr recycelt wird, z. B. bei den Thermoplasten, in anderen Bereichen jedoch noch nicht. Gerade beim chemischen Recycling ist der Reifegrad der Technologien noch nicht sehr fortgeschritten und manchmal sind auch Anlagekapazitäten noch nicht ausgelastet. Hier muss noch Pionierarbeit geleistet werden, um z. B. interdisziplinäre Geschäftsmodelle auszuarbeiten. Gleichzeitig gibt es Anwendungen für Composites, die schon heute aus technischer Sicht einfach zu recyceln wären und es ‚nur‘ an der Logistik und dem Willen fehlt. Aber auch eine Harmonisierung von Gesetzen und Normen sowie der Rechtsprechung wäre wünschenswert, um das Composites-Recycling weiter voranzubringen.“

Die Studie ist zum Preis von 799,- Euro (zzgl. MwSt.) bei der AVK im PDF-Format erhältlich (ermäßigter Preis für AVK-Mitglieder: 399,- Euro zzgl. MwSt.).

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.