From the Sector

Reset
39 results
(c) Rieter
24.06.2019

Rieter Awarded Large Contract from Egypt

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

 

  • Contracts signed for seven projects
  • Contract comprises delivery of compact- and ring-spinning systems
  • Total amounts to roughly CHF 180 million
  • Order intakes are anticipated to be realized in 2019; sales posted in the 2020/2021 financial years

Rieter Group has signed contracts with the Cotton & Textile Industries Holding Company, Cairo (Egypt), at the ITMA 2019. These seven projects entail a total of 180 million Swiss francs. The contract comprises delivery of compact- and ring-spinning systems over the next two years. This order is part of a comprehensive modernization program of the Egyptian textile industry. The order intakes are anticipated to be realized in 2019 with sales posted in the 2020/2021 financial years.

The contracts were signed at the ITMA in Barcelona, Spain, by Dr. Ahmed Moustafa Mohamed, Chairman Cotton & Textile Industries Holding Company, and Dr. Norbert Klapper, CEO Rieter.

Dr. Klapper was very pleased at the formal signing of contracts: “We would like to thank our Egyptian business partners for the confidence they are placing in Rieter by awarding us this contract. Rieter has been the partner of choice of the Egyptian spinning industry for decades. We are delighted to be given the opportunity of making such an important contribution to the modernization of the Egyptian textile industry.”

Source:

Media Relations, Rieter Management AG

(c) Epson
20.06.2019

Epson auf der ITMA 2019: Exzellenter Textilbedruck

Das japanische Unternehmen stellt auf der Messe seine neuesten Maschinen für den industriellen, digitalen Textilbedruck vor Meerbusch, Barcelona, 20. Juni 2019 - Epson, ein Pionier im Markt des digitalen Textildrucks, wird auf der ITMA 2019 (20. bis 26. Juni 2019, Fira de Barcelona, L'Hospitalet de Llobregat in Barcelona, Halle 3, Stand C210) ausgewählte Maschinen seiner neuen Monna Lisa Evo Tre Serie sowie die dazu passenden Genesta Pigmenttinten vorstellen. Mit den neuen Maschinen versetzt das Unternehmen Druckdienstleister in die Lage, sich effizient auf einen sich rasch verändernden digitalen Textilmarkt einzustellen.

Das japanische Unternehmen stellt auf der Messe seine neuesten Maschinen für den industriellen, digitalen Textilbedruck vor Meerbusch, Barcelona, 20. Juni 2019 - Epson, ein Pionier im Markt des digitalen Textildrucks, wird auf der ITMA 2019 (20. bis 26. Juni 2019, Fira de Barcelona, L'Hospitalet de Llobregat in Barcelona, Halle 3, Stand C210) ausgewählte Maschinen seiner neuen Monna Lisa Evo Tre Serie sowie die dazu passenden Genesta Pigmenttinten vorstellen. Mit den neuen Maschinen versetzt das Unternehmen Druckdienstleister in die Lage, sich effizient auf einen sich rasch verändernden digitalen Textilmarkt einzustellen.

More information:
Epson ITMA 2019
Source:

Epson Deutschland GmbH

19.06.2019

Rieter at ITMA 2019 in Barcelona

At ITMA 2019, Rieter showcases innovations for all four spinning processes that are established on the market. These innovations are designed to reduce raw material, energy and labor costs, while also increasing productivity during production of the yarn quality required in each case. Solutions to increase the flexibility of the spinning mill are also presented. In addition, Rieter presents two solutions for the production of innovative yarns.

At ITMA 2019, Rieter showcases innovations for all four spinning processes that are established on the market. These innovations are designed to reduce raw material, energy and labor costs, while also increasing productivity during production of the yarn quality required in each case. Solutions to increase the flexibility of the spinning mill are also presented. In addition, Rieter presents two solutions for the production of innovative yarns.

More information:
Rieter ITMA 2019
Source:

Rieter

(c) Mayer & Cie
13.06.2019

Mayer & Cie.: OVJA 1.1 EETT jacquard machine debuts at ITMA

Mayer & Cie. (MCT) is premiering the OVJA 1.1 EETT at the industry’s leading trade fair, ITMA. A premium jacquard machine, it is part of the focus on sports of the company’s “Stay a winner: With Mayer & Cie.” presentation in Barcelona. The industry leader developed the OVJA 1.1 EETT especially for the manufacture of shoe uppers now that “fabrics” are in demand for sports and leisure footwear. The OVJA 1.1 EETT comes with double electronics and double transfer technology, which is reflected in an extra variety of patterns and, in particular, in innovative hole structures.

“The OVJA 1.1 EETT is yet another machine in our portfolio with which customers can claim to be on the winning side in keeping with our ITMA slogan ‘Stay a winner: With Mayer & Cie.’,” says Marcus Mayer, Managing Director of Mayer & Cie. in charge of technical development. “The OVJA 1.1 EETT is most definitely a premium machine and the right choice for especially exacting requirements such as multi-coloured spacer fabrics with a 3D effect or a wide range of hole structures.”

 

Mayer & Cie. (MCT) is premiering the OVJA 1.1 EETT at the industry’s leading trade fair, ITMA. A premium jacquard machine, it is part of the focus on sports of the company’s “Stay a winner: With Mayer & Cie.” presentation in Barcelona. The industry leader developed the OVJA 1.1 EETT especially for the manufacture of shoe uppers now that “fabrics” are in demand for sports and leisure footwear. The OVJA 1.1 EETT comes with double electronics and double transfer technology, which is reflected in an extra variety of patterns and, in particular, in innovative hole structures.

“The OVJA 1.1 EETT is yet another machine in our portfolio with which customers can claim to be on the winning side in keeping with our ITMA slogan ‘Stay a winner: With Mayer & Cie.’,” says Marcus Mayer, Managing Director of Mayer & Cie. in charge of technical development. “The OVJA 1.1 EETT is most definitely a premium machine and the right choice for especially exacting requirements such as multi-coloured spacer fabrics with a 3D effect or a wide range of hole structures.”

 

More information:
Mayer & Cie ITMA 2019 Jacquard
Source:

Mayer & Cie

(c) FONG’s Europe
03.06.2019

The new Goller Knit Merc for perfect dyeing results

At ITMA 2019 in Barcelona from June 20-26th, Goller will introduce the new Knit Merc for achieving the highest quality mercerization of knitted fabrics at the lowest tension and with under 3% variation in dimensional stability with high grade fabrics, for perfect dyeing results every time.

Mercerization is an essential textile finishing step for all cotton and cellulosic fibre-based fabrics in order to improve dye uptake and tear strength while reducing fabric shrinkage and imparting a silk-like lustre to the materials.

The Knit Merc is the result of intensive R&D developments at Goller and follows the successful introduction to the market of the company’s Sintensa Cyclone drum washing compartments for achieving the highest washing efficiency at the lowest tension.

The Knit Merc being exhibited at ITMA 2019 can accommodate 8.4 metres of fabric in its impregnation compartment and a further four metres in its first chain section to achieve a production speed of 25m/min at 30 seconds dipping time.

At ITMA 2019 in Barcelona from June 20-26th, Goller will introduce the new Knit Merc for achieving the highest quality mercerization of knitted fabrics at the lowest tension and with under 3% variation in dimensional stability with high grade fabrics, for perfect dyeing results every time.

Mercerization is an essential textile finishing step for all cotton and cellulosic fibre-based fabrics in order to improve dye uptake and tear strength while reducing fabric shrinkage and imparting a silk-like lustre to the materials.

The Knit Merc is the result of intensive R&D developments at Goller and follows the successful introduction to the market of the company’s Sintensa Cyclone drum washing compartments for achieving the highest washing efficiency at the lowest tension.

The Knit Merc being exhibited at ITMA 2019 can accommodate 8.4 metres of fabric in its impregnation compartment and a further four metres in its first chain section to achieve a production speed of 25m/min at 30 seconds dipping time.

It is designed for dry-on-wet mercerizing, either cold or hot, and is equipped with an inlet combination of scroll and slat rollers for fabric guidance, a Tandematic uncurler in front of a rubberized de-airing roller and a grooved 320mm bottom roller with 320mm and 600mm perforated upper drums.

It benefits from automatic tension regulation and the low liquor content is ensured by the integrated lye tank and automatic circulation and filtration units.

An 8-ton high efficiency squeezer is stationed at the exit before the chain section and a 5-ton squeezer at the exit of the chain field.

Further fabric control and stability is provided by a cast iron pin chain with automatic optical and mechanical sensors, the Tandematic uncurler, an overfeed device and a driven belt arrangement for fabric support.

Source:

AWOL Media

At ITMA 2019, Mimaki will collaborate with Dutch fashion designer Tessa Koops, printing her designs onto a variety of applications, including curtains, cushions, and wallpapers. (c) Mimaki Europe B.V.
At ITMA 2019, Mimaki will collaborate with Dutch fashion designer Tessa Koops, printing her designs onto a variety of applications, including curtains, cushions, and wallpapers.
28.05.2019

Mimaki: First Global Showing of New Hybrid Textile Printer at ITMA 2019

  • New textile printer delivers unparalleled flexibility and unprecedented application capabilities
  • Mimaki to showcase a wealth of technological breakthroughs and creative opportunities to drive digital print adoption in textiles

Mimaki Engineering, a leading manufacturer of inkjet printers and cutting systems, today announces that it will showcase its broad portfolio of cutting-edge digital print technologies at ITMA 2019 (20-26 June 2019, Fira de Barcelona, Spain). This will include the first global showing of a brand-new hybrid digital textile printer, uniquely featuring both direct-to-textile and direct-to-transfer print capabilities. Crucially, these features enable textile and garment manufacturers to achieve unparalleled flexibility and enhanced application opportunities for increased business growth.

To facilitate these benefits, the new Mimaki printer also allows multiple sets of inks to be loaded simultaneously, supporting increased fabric range versatility and maximum product variety.

  • New textile printer delivers unparalleled flexibility and unprecedented application capabilities
  • Mimaki to showcase a wealth of technological breakthroughs and creative opportunities to drive digital print adoption in textiles

Mimaki Engineering, a leading manufacturer of inkjet printers and cutting systems, today announces that it will showcase its broad portfolio of cutting-edge digital print technologies at ITMA 2019 (20-26 June 2019, Fira de Barcelona, Spain). This will include the first global showing of a brand-new hybrid digital textile printer, uniquely featuring both direct-to-textile and direct-to-transfer print capabilities. Crucially, these features enable textile and garment manufacturers to achieve unparalleled flexibility and enhanced application opportunities for increased business growth.

To facilitate these benefits, the new Mimaki printer also allows multiple sets of inks to be loaded simultaneously, supporting increased fabric range versatility and maximum product variety.

As the future of textile printing and for further production benefits, Mimaki will also give a sneak preview of its new and upcoming TA Job Controller software, specifically designed for textile production environments. For use on Mimaki’s successful, EDP-awarded Tiger Pro Series and Rimslow TR Series – and all Mimaki textile printers –, TA Job Controller enables users to connect one-on-one to the RIP and other devices, for an automated workflow from design to pre-print, print and post print processes.

 

More information:
Mimaki
Source:

Mimaki Europe B.V.

(c) Epson Deutschland GmbH
28.05.2019

Epson auf der ITMA 2019

Zusammen mit den Tochtergesellschaften For.Tex und Robustelli stellt Epson Lösungen für den Textildruck vor

Epson wird auch 2019 an der ITMA (20. bis 26. Juni, Fira de Barcelona, L'Hospitalet de Llobregat), der weltweit führenden Messe für Textilproduktionsmaschinen, teilnehmen. Auf seinem fast 500 Quadratmeter großen Stand (C210) in Halle 3 der Messe zeigt der japanische Hersteller professioneller Drucklösungen Innovationen und Lösungen für den Textilmarkt. Während das mit am Stand ausstellende Unternehmen For.Tex die Tinten sowie Materialien für die Vor- und Nachbehandlung von Geweben beisteuert, liefert der Epson Partner Robustelli als ein führender Anbieter im Markt der industriellen Textildruckern das Know-how zur Produktion zuverlässiger, industrieller Drucksysteme für eine effiziente und qualitativ hochwertige Textilproduktion.

Zusammen mit den Tochtergesellschaften For.Tex und Robustelli stellt Epson Lösungen für den Textildruck vor

Epson wird auch 2019 an der ITMA (20. bis 26. Juni, Fira de Barcelona, L'Hospitalet de Llobregat), der weltweit führenden Messe für Textilproduktionsmaschinen, teilnehmen. Auf seinem fast 500 Quadratmeter großen Stand (C210) in Halle 3 der Messe zeigt der japanische Hersteller professioneller Drucklösungen Innovationen und Lösungen für den Textilmarkt. Während das mit am Stand ausstellende Unternehmen For.Tex die Tinten sowie Materialien für die Vor- und Nachbehandlung von Geweben beisteuert, liefert der Epson Partner Robustelli als ein führender Anbieter im Markt der industriellen Textildruckern das Know-how zur Produktion zuverlässiger, industrieller Drucksysteme für eine effiziente und qualitativ hochwertige Textilproduktion.

More information:
ITMA 2019 Epson
Source:

Epson Deutschland GmbH

(c) A. Monforts Textilmaschinen GmbH & Co. KG
21.05.2019

Monforts at ITMA 2019

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

A. Monforts Textilmaschinen GmbH & Co. KG will demonstrate a range of new advances made possible by Industry 4.0 techniques at ITMA 2019 in Barcelona, Spain, from June 20-26.

At stand D101 in Hall 2, visitors will discover the possibilities of ‘digital twin’ capability – now being made available for all Monforts machine systems – and that by exploiting the latest advanced sensor technology, comprehensive technical machine data can now be virtually mapped in the cloud in real time. The data can be easily accessed using the new Monforts Smart Support and Smart Check apps for an instantaneous status overview. All specifications relating to machine performance and the production process can be mapped, to enable vastly simplified and targeted analysis for controlled planning and production. Insights harnessed from such analysis can be used to optimise the actual production process. At the same time, potential sources of error can be anticipated and eliminated, enabling improved machine availability while considerably minimising downtime.

Parts prediction
In addition, the digital twin system provides information on the individual wear parts of a system, such as, for example, converters or gears. “Operators and mill managers are informed by Smart Check sensors when maintenance or the replacement of key components will be required, well ahead of time,” explains Monforts Vice President Klaus A. Heinrichs. “Direct access to the integrated Monforts webshop allows users to instantly order such parts when they are needed, virtually preventing machine downtime.” On request, Monforts can also virtually monitor machine performance and pro-actively alert customers to the need for preventative action. In such cases, however, data is only ever called from the cloud by Monforts when customers have given their full consent, in the interests of data security. Data from Smart Check, for example, can even be used to analyse a system’s energy requirements, allowing machine operation to be optimised by tailoring production runs to the peaks and troughs of electricity costs.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

(c) Rabatex Industries
20.05.2019

Rabatex: Innovative Weaving Preparatory Technologies at ITMA 2019

  • High speed Sample Warping Machine suitable for yarn range between 5 to 500 Tex
  • Sectional Warping Machine has user friendly advance software & data management
  • Single End Sizing Machine offers 4, 8, 12 and 16 spindle configurations

India based and innovation driven company, Rabatex Industries has lined-up the latest and innovative weaving preparatory technologies including battery operated material handling equipment in a 72 square metre stall at ITMA 2019 in Barcelona in Hall no. 4, Booth no. D215.

The technologies on display include an Automatic Sample Warper, Single End Sizing Machine, Advanced Sectional Warper, Battery Operated Material Handling Equipment and also an Ultrasonic Reed Cleaning Machine. The Rabatex high speed Automatic Sample Warping Machine model RI 6001 is primarily for production of samples and short production warp at very high production rate. The RI 6001 has a robustly constructed warping drum, suitable up to widths of 2400 mm and for warping lengths between 21 and 450 metres (depending on thread density) and suitable for yarn range from 5 to 500 Tex.

  • High speed Sample Warping Machine suitable for yarn range between 5 to 500 Tex
  • Sectional Warping Machine has user friendly advance software & data management
  • Single End Sizing Machine offers 4, 8, 12 and 16 spindle configurations

India based and innovation driven company, Rabatex Industries has lined-up the latest and innovative weaving preparatory technologies including battery operated material handling equipment in a 72 square metre stall at ITMA 2019 in Barcelona in Hall no. 4, Booth no. D215.

The technologies on display include an Automatic Sample Warper, Single End Sizing Machine, Advanced Sectional Warper, Battery Operated Material Handling Equipment and also an Ultrasonic Reed Cleaning Machine. The Rabatex high speed Automatic Sample Warping Machine model RI 6001 is primarily for production of samples and short production warp at very high production rate. The RI 6001 has a robustly constructed warping drum, suitable up to widths of 2400 mm and for warping lengths between 21 and 450 metres (depending on thread density) and suitable for yarn range from 5 to 500 Tex.

The RI 6001 comes with a heavy duty rotational creel with a maximum creel capacity of 16 colours and is suitable of attaining maximum speeds of up to 1,200 metres per minutes. The Rabatex Sectional Warping Machine RI 112 is a state-of-the-art technology which produces high quality warp beams with higher productivity. The RI 112 comes with user friendly advance software and data management, which offers all online data of warping operations. It also offers graphical display of all events and breakages and also loss end memory control.

The ergonomically designed Single End Sizing Machine RI 8001 offers 4, 8, 12 and 16 spindle configurations and produces sized yarn of the highest quality to ensure trouble-free and smooth weaving operations. The RI-8001 is suitable for cotton yarn in the range of 10’s to 120’s Ne and polyester yarn in the range of 30 to 210 deniers, with option of dry steam or electric heater drying system. Rabatex operates four fully functioning manufacturing units, dedicated to producing state-of-the-art machineries and technologies. Another plant covering an area of 50,000 square metres is under construction, which would be devoted for manufacturing material handling and storage equipment.

“All our technologies, including those on display at our ITMA 2019 stall are very robust and so require very less maintenance. We have developed these technologies through our in-house R&D team and go through rigorous tests before being launched in the market,” Mr Haresh Panchal, Managing Director of Rabatex Industries said. “We have grown in double digits in the last few years, thanks to the continuous launching of new technologies and also due to the excellent after sales service support, which we provide to our customers,” Mr Panchal added.

Source:

Rabatex Industries

(c) Herzog
17.05.2019

ITMA Countdown – Focus Industry 4.0

  • Herzog: Organic start of Industry 4.0 scenarios with an app
  • Mahlo: Better production results with digital help
  • Lindauer DORNIER: An addition to personalized services

On the occasion of a VDMA press conference themed “ITMA countdown” in Frankfurt, speakers from member companies Lindauer DORNIER, Herzog and Mahlo showed how Industry 4.0 solutions are going to impact the textile process chain and what technologies visitors can expect to see at ITMA 2019. The products examples of the respective companies made clear that Industry 4.0 is no end in itself but helps to improve production processes and results and supplements the range of services.

 

Interview 1

Interview 2

 

  • Herzog: Organic start of Industry 4.0 scenarios with an app
  • Mahlo: Better production results with digital help
  • Lindauer DORNIER: An addition to personalized services

On the occasion of a VDMA press conference themed “ITMA countdown” in Frankfurt, speakers from member companies Lindauer DORNIER, Herzog and Mahlo showed how Industry 4.0 solutions are going to impact the textile process chain and what technologies visitors can expect to see at ITMA 2019. The products examples of the respective companies made clear that Industry 4.0 is no end in itself but helps to improve production processes and results and supplements the range of services.

 

Interview 1

Interview 2

 

(c) LTG Aktiengesellschaft
15.05.2019

LTG auf der ITMA Barcelona 2019

Fasern und Produktionsstäube filtern oder Vliese verdichten – mit Systemen von LTG

Ob natürliche Textilien, Nonwovens oder Hightech-Faserherstellung: LTG-Technik sorgt in der Textilbranche für das passende Hallenklima, die Luftströmung zum Legen oder filtert Fasern, um sie für die Entsorgung bzw. das Recycling innerhalb des Prozesses bereitzustellen. Zur Abscheidung von Fasern und Stäuben hat sich unter anderem die Kompaktfiltereinheit CFU bewährt. Sie ist modular aufgebaut und kann aus verschiedenen Filterstufen zusammengestellt werden, zum Beispiel aus dem Vorfilter TVM und dem Feinfilter CompactDrum. Die gefilterten Stoffe lassen sich in Faser- oder Staubkompaktoren sicher und effizient abscheiden. Speziell für größere Luftmengen sind die LTG-Trommelfilter konzipiert. LTG bietet außerdem Radial-, Axial- und Querstromventilatoren für verschiedene Einsatzgebiete, zum Beispiel das Fördern der Stäube, das Trocknen in Band- oder Durchlaufprozessen oder das Legen und Verdichten von Vliesen. Abgerundet wird das Portfolio durch Befeuchtungssysteme, die für eine ideale Luftfeuchtigkeit im Produktionsprozess sorgen.

Fasern und Produktionsstäube filtern oder Vliese verdichten – mit Systemen von LTG

Ob natürliche Textilien, Nonwovens oder Hightech-Faserherstellung: LTG-Technik sorgt in der Textilbranche für das passende Hallenklima, die Luftströmung zum Legen oder filtert Fasern, um sie für die Entsorgung bzw. das Recycling innerhalb des Prozesses bereitzustellen. Zur Abscheidung von Fasern und Stäuben hat sich unter anderem die Kompaktfiltereinheit CFU bewährt. Sie ist modular aufgebaut und kann aus verschiedenen Filterstufen zusammengestellt werden, zum Beispiel aus dem Vorfilter TVM und dem Feinfilter CompactDrum. Die gefilterten Stoffe lassen sich in Faser- oder Staubkompaktoren sicher und effizient abscheiden. Speziell für größere Luftmengen sind die LTG-Trommelfilter konzipiert. LTG bietet außerdem Radial-, Axial- und Querstromventilatoren für verschiedene Einsatzgebiete, zum Beispiel das Fördern der Stäube, das Trocknen in Band- oder Durchlaufprozessen oder das Legen und Verdichten von Vliesen. Abgerundet wird das Portfolio durch Befeuchtungssysteme, die für eine ideale Luftfeuchtigkeit im Produktionsprozess sorgen.

More information:
ITMA 2019 LTG Aktiengesellschaft
Source:

Press’n’Relations II GmbH

(c) AWOL Media
06.05.2019

The new Vandewiele RCE2+ digital carpet weaving machine at ITMA 2019

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

A wide range of new technologies will be demonstrated by Vandewiele at the ITMA 2019 textile machinery show in Barcelona from June 20-26, including the latest RCE2+ digital carpet weaving machine.

All Vandewiele technologies are now being equipped for machine-to-machine interaction and learning, as part of the company’s comprehensive TEXconnect programme.

Meeting new industry needs
As a leader in complete carpet manufacturing systems – including BCF extrusion lines, heat setting systems and carpet weaving and tufting machines – Vandewiele has rapidly responded to the evolving needs of the textile industry for smaller and customised production runs, the most challenging of designs, and faster and more sustainable manufacturing.

The company’s sensors, software programmes and servers have become increasingly sophisticated as part of the TEXconnect program, and the real-time data from different machines – across connected manufacturing sites and across different countries and even continents – can be collected and shared. Digital models of both machines and production processes can be created and analysed for the optimisation of production settings, to vastly improve scheduling and planning and also make considerable savings in raw materials and energy consumption.

Virtual and remote control now allows for the Big Data analysis that is propelling the industry forward and will pave the way for AI applications. For carpet manufacturers, all of this is leading to the creation of truly Smart Factories.

RCE2 carpet weaving
The new RCE2+ Rug and Carpet Expert weaving machine is a truly digital workhorse, with all yarns continuously controlled and measured and the difficult bobbin changes of the past completely eliminated. This is as a result of Vandewiele’s latest Fast Creel, with the feed and tension of each pile yarn controlled by individual servomotors.

The pile yarns are now fed directly into the machine without having to pass pile-stop motions, to both increase efficiency and eliminate any waste yarns, while achieving previously unreachable industrial speeds.

The filling enters the machine smoothly via the latest IRO X3 winders, heavy duty filling brakes with multi lamellas, an active yarn recuperator and a high speed weft mixer, where again, all tensions are set electronically. Vandewiele’s servo-driven heddle frames (Smart Frames) are meanwhile already well proven in the industry.

TEXconnect further provides readily-available data on all yarn consumption, tension and threading, and then will supply the predictive maintenance that is paving the way to self-learning carpet weaving machines.

All of this would be unnecessary, if it didn’t result in allowing manufacturers to make the highest quality carpets at the most economic prices ever, with savings on the highest-bulk pile yarns from the Vandewiele extrusion lines, reduced waste yarns in the creel and industrial production speeds that have never before been attained.

 

More information:
TEXconnect
Source:

AWOL Media

(c) imogo
02.05.2019

A proposition for pioneers at ITMA

imogo is a new Swedish company formed by a team with long experience in textile processing technology. It is now boldly aiming to change the face of the textile manufacturing industry with its new Dye-Max spray dyeing technology, to be introduced to the market at ITMA 2019 in Barcelona.

While still at the prototype stage, and with a first full-scale line currently under construction and due to be demonstrated this Autumn before delivery, the DyeMax nevertheless promises to slash the use of fresh water, waste water, energy and chemicals by as much as 90% compared to conventional jet dyeing systems.

Spray cassettes
Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro speed valve that controls the volume to be applied. The chamber is equipped with an exhaust system and droplet separator to ensure that the environment around the unit is free from particles.

imogo is a new Swedish company formed by a team with long experience in textile processing technology. It is now boldly aiming to change the face of the textile manufacturing industry with its new Dye-Max spray dyeing technology, to be introduced to the market at ITMA 2019 in Barcelona.

While still at the prototype stage, and with a first full-scale line currently under construction and due to be demonstrated this Autumn before delivery, the DyeMax nevertheless promises to slash the use of fresh water, waste water, energy and chemicals by as much as 90% compared to conventional jet dyeing systems.

Spray cassettes
Its application unit consists of a closed chamber containing a series of spray cassettes with precision nozzles for accurate and consistent coverage, in combination with the patented imogo pro speed valve that controls the volume to be applied. The chamber is equipped with an exhaust system and droplet separator to ensure that the environment around the unit is free from particles.

“The spray cassettes are a key part in the Dye-Max line,” explains Imogo’s founding partner Per Stenflo. “There is one set of spray cassettes for each of the three separate dye dispersion feed lines and they can be easily exchanged without the need for tools in less than a minute. This allows for extremely fast changeovers between different colours without the need for cleaning. And because the spray cassettes are removable, all maintenance can be performed off line. 
After applying the dye dispersion the fabric is rolled onto a shaft and moved to the autoclave for deep dye fixation via heat and pressure.”

The savings in treatment water the Dye-Max achieves are due to the extremely low liquor ratio of 0.5 litres per kilo of fabric Stenflo adds. 

“At the same time, the low liquor ratio and the spray process require considerably less auxiliary chemistry to start with, and all of it is used in the process, which also greatly reduces the production of waste water, with only 20 litres being required for wash at changeovers. The low liquid content in the fabric meanwhile minimises the energy needed for fixation.”

The Dye-Max has a working speed of up to 50m/min with the practical speed determined by the fabric weight and application volume. 
 

More information:
imogo
Source:

imogo

(c) TMAS by AWOL Media
29.04.2019

Baldwin Technology to launch the TexCoat G4 at ITMA 2019

Revolutionizing textile finishing by enhancing sustainability and total process control

Baldwin Technology Company Inc., a member of TMAS, the Swedish textile machinery association, is pleased to announce the launch of the TexCoat G4 at the ITMA trade show in Barcelona from June 20-26, 2019. The TexCoat G4 is the next generation of the company’s revolutionary non-contact precision application system for fabric finishing.

The system enables a continuously high quality and productive textile finishing process with zero chemistry waste and drastically reduced water and energy consumption. TexCoat G4 will be demonstrated by Baldwin in Hall H2, stand A204.

“We are immensely proud to launch the TexCoat G4 at ITMA 2019,” said Eric Norling, Vice President Precision Application Segment, Baldwin Technology. “This is an opportunity to experience an innovation that drastically improves both the process and product quality, while saving time, valuable resources and contributing to a sustainable future.”

Revolutionizing textile finishing by enhancing sustainability and total process control

Baldwin Technology Company Inc., a member of TMAS, the Swedish textile machinery association, is pleased to announce the launch of the TexCoat G4 at the ITMA trade show in Barcelona from June 20-26, 2019. The TexCoat G4 is the next generation of the company’s revolutionary non-contact precision application system for fabric finishing.

The system enables a continuously high quality and productive textile finishing process with zero chemistry waste and drastically reduced water and energy consumption. TexCoat G4 will be demonstrated by Baldwin in Hall H2, stand A204.

“We are immensely proud to launch the TexCoat G4 at ITMA 2019,” said Eric Norling, Vice President Precision Application Segment, Baldwin Technology. “This is an opportunity to experience an innovation that drastically improves both the process and product quality, while saving time, valuable resources and contributing to a sustainable future.”

The non-contact spray technology brings numerous advantages compared to conventional methods of applying finishing chemistry. The chemistry is uniformly distributed across the textile surface and is applied only where it is required – on one or both sides of the fabric. This is highly beneficial e.g. when applying water repellants on laminated fabrics, as it eliminates the problem of chemistry affecting the quality of the adhesion layer. Furthermore, the non-contact technology eliminates chemistry dilution in wet-on-wet processes, allowing full control of maintaining consistent chemistry coverage rates. Additionally, with no bath contamination during the finishing process, there is zero downtime during colour or fabric changeovers.

 

(c) FONG’s Europe
29.04.2019

Innovations in long tube dyeing from FONG’S Europe

At ITMA 2019 in Barcelona from June 20-26 FONG’S Europe, a member of CHTC FONG’S International Group, will be providing details of its new THEN Supratec LTM hydraulic long-tube dyeing machine.


This machine is distinguished by the ability to vary the angle of the Then Flexkier for either dry (jet) or wet (overflow) mode dyeing, in order to optimise the dye liquor ratio – from 1:15 down to 1:4 – depending on the materials being dyed.

This translates into considerable savings in auxiliaries, water and energy.

The Supratec LTM is suitable for the treatment of both woven and knitted fabrics ranging from the most sensitive articles to heavyweight materials within the weight range of 25 g/lm to 380 g/lm, and operates at very low tension due to the extremely low lifting height between the variable nozzle and the plaited fabric.

At ITMA 2019 in Barcelona from June 20-26 FONG’S Europe, a member of CHTC FONG’S International Group, will be providing details of its new THEN Supratec LTM hydraulic long-tube dyeing machine.


This machine is distinguished by the ability to vary the angle of the Then Flexkier for either dry (jet) or wet (overflow) mode dyeing, in order to optimise the dye liquor ratio – from 1:15 down to 1:4 – depending on the materials being dyed.

This translates into considerable savings in auxiliaries, water and energy.

The Supratec LTM is suitable for the treatment of both woven and knitted fabrics ranging from the most sensitive articles to heavyweight materials within the weight range of 25 g/lm to 380 g/lm, and operates at very low tension due to the extremely low lifting height between the variable nozzle and the plaited fabric.

“Existing Supratec machines on the market are providing excellent performance for a wide range of delicate synthetic fabrics, from polyester to polyamide with high content of elastane,” says FONG’S Europe Director of Sales and Marketing Richard Fander. “Heat-setting can often can be avoided, which improves the handle of the material and saves costs and the lengthwise-elongation of the fabric being treated is lower than on winch-driven machines.”

(c) TMAS
26.04.2019

Innovate or die: TMAS at ITMA 2019

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

A focus on customer service, aligned with the drive to constantly innovate, has long ensured that the member companies of TMAS – the Swedish texile machinery manufacturers’ association – stay well ahead of the curve.

“All of the Swedish textile machinery companies are doing really well in major markets such as Europe, China, India and the USA,” says TMAS Secretary General Therese Premler-Andersson. “They are now gathering forces to prepare for the most important show – ITMA 2019 in Barcelona in June. I expect to see new players and partnerships as we enter the industry 4.0 era for real. We are ready to display an even higher degree of the real time monitoring of processes, automation, flexible customisation, and the incorporation of robots into production lines.  Our customers expect a lot of in terms of knowledge and our ability to customise and offer turnkey solutions.”

The forward-looking attitude of the Swedish companies is perhaps best summed up by Reimar Westerlind, the owner, since 1961, of ACG Gruppen.
At the age of 90, Reimar still travels to his office every day to oversee the operations of the diverse companies operating under the ACG umbrella.
“Everything now is about automation and digitisation,” he says. “We have to be on that track or we will be lost – innovate or die.”

Robotics
One ACG Gruppen company moving rapidly forward with new innovations in this area is ACG Kinna, which at ITMA 2019 will be providing dramatic live demonstrations of its new robotic pillow filling system.
This has the ability to fill and finish some 3,840 pillows per eight-hour shift, which is a considerable improvement on what is currently possible with existing systems, resulting in significant savings in both labour and energy for busy home textile businesses.

At ITMA 2019, Eton will be demonstrating a complete material handling solution with advanced software providing real-time information covering every aspect of the process.
“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén.

Sensors
Advanced senor developments are playing a large part in moving many areas of the textile industry forward too.
Eltex of Sweden, for example, is achieving considerable success with its yarn fault detection and tension monitoring systems across a range of sectors, including the tufting of carpets, the creeling of woven materials and even the production of woven reinforcements for the composites industry.

At successive ITMA shows, IRO AB has also consistently introduced new milestones in the field of yarn feeding technology for weaving machines, and ITMA 2019 will be no exception.
“Following significant investment in our R&D capabilities, we have been making great progress in further boosting the efficiency and performance of our expanding X3 range,” says IRO AB Managing Director and Chairman of TMAS Mikael Äremann. “I can’t remember a time since the 1980s when we had so many new innovations to unveil at an ITMA, and I’m greatly looking forward to the positive response to them we are anticipating in Barcelona this June.”

Resource savings
ITMA 2019 will meanwhile see the launch of TexCoat G4 – the next generation of Baldwin Technology’s non-contact precision application system for fabric finishing. The TexCoat G4 enables a continuously high-quality and productive textile finishing process with zero chemistry waste and minimised water and energy consumption.
The non-contact spray technology brings a range of advantages including single or double-sided application,  the elimination of Foulard bath contamination, low wet pick-up levels leading to the elimination of drying steps, zero chemistry waste in changeovers of chemistry, colour or fabric, and the possibility of batch reporting, visibility of pad loading, chemical usage etc.

Other TMAS companies exhibiting in Barcelona include Texo AB, whose wide-width weaving looms make the belts for machines on which half of the world’s paper is made, ES-Automatex, which specialises in bespoke automation concepts and Svegea, a company leading the field in a number colarette machines and cutting and slitting equipment.

“At the last ITMA in 2015 in Milan, there was much talk about Industry 4.0 technologies but certainly from the perspective of TMAS, ITMA 2019 will be the place for concrete solutions as to how data and the new tools we have available can be exploited to the full,” says Therese Premler-Andersson. “There is already much more networking between the companies, with software very much the enabler and common interfaces bringing ideas closer together. We are greatly looking forward to further exchanges of ideas when meeting with customers old and new in Barcelona.”

More information:
TMAS ITMA 2019
Source:

Issued on behalf of TMAS by AWOL Media.

(c) Eton Systems
25.03.2019

Materials handling for Industry 4.0 concepts from Eton Systems

With over 5,000 tailored installations for a range of industries installed in over 60 countries, Eton Systems, headquartered in Gånghester, Sweden, has established a reputation as a clear leader in the field of complete material handling systems.

At ITMA 2019 in Barcelona from June 20-26th, the company will be demonstrating a complete installation based on a future production concept, with advanced software providing real-time information covering every aspect of the process.

With over 5,000 tailored installations for a range of industries installed in over 60 countries, Eton Systems, headquartered in Gånghester, Sweden, has established a reputation as a clear leader in the field of complete material handling systems.

At ITMA 2019 in Barcelona from June 20-26th, the company will be demonstrating a complete installation based on a future production concept, with advanced software providing real-time information covering every aspect of the process.

“Our systems are a natural fit with the major Industry 4.0 networked manufacturing plants that are now being constructed worldwide for sectors such as the garment and home textiles manufacturing and automotive industries,” says Eton’s Sales and Commercial Director Roger Ryrlén. “We have had a very busy last 12 months, with more major projects in the pipeline. We understand, however, that one solution does not fit all situations, which is why we think in terms of custom-made solutions matched to specific customer needs. Buying a system from us, is buying a solution and a partnership. Each system includes support, service, training and knowledge built on more than 70 years of experience. When a customer invests in an Eton System the increased efficiency normally results in savings of between 40-60%.”

A typical system consists of overhead conveyors with individually-addressable product carriers which automatically steer their way through programmed operation sequences. They are monitored by a computer providing all the necessary data for optimally measuring and managing processes. The systems are also highly flexible and can be rapidly modified to changes in the production line or the need for expansion.

Options for smart factories
Eton’s Flexible Productivity Concept (FPC) is based on two system platforms with a wide range of options, including:

  • Multiple rails for sorting at workstations.
  • Buffering
  • Automatic loading devices, pick-ups and work delivery robots.
  • Bridges and elevators that link systems and floors.
  • Historical links to products after completion.
  • Module-based software.

Via an addressable product carrier, an Eton system transports all the components of a complete product through the manufacturing process.

Eton Systems will be at stand A214, in Hall 2 at the Barcelona exhibition.

More information:
Eton Systems
Source:

AWOL Media

(c) Fong’s Europe GmbH
25.03.2019

FONG’S EUROPE celebrates the 100th anniversary of its flagship THEN brand at ITMA

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

More information:
Fong’s Europe GmbH
Source:

AWOL Media

14.11.2018

Oerlikon Manmade Fibers Segment at the OpenStack Summit in Berlin

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

"Datacenter in a box" is the new powerful, flexible and secure IT infrastructure solution for the textile industry of the future

Remscheid/Berlin – Oerlikon Manmade Fibers Segment Industrie 4.0 solutions for the production of polyester, nylon and polypropylene are based on the digitalization of the production landscape and the intelligent processing of the flood of data generated in this way. In the future, the segment will offer its customers a new powerful, flexible and, above all, secure IT infrastructure. The "Datacenter in a box" was presented for the first time at the OpenStack Summit in Berlin, Germany, to a broad specialist audience. The compact datacenter works on the basis of the open operating system OpenStack, which enables virtual computing in a secure private cloud environment.

Externally, the datacenter looks unspectacular: The box contains standard hardware such as server rack, network components, batteries for reliability, monitoring sensors and a few more things. But what counts are the inner values. The Open Source software OpenStack consists of many different services and allows the virtualization of a large pool of computing, storage and network resources in a flexible, scalable private cloud. This brings two central advantages: On the one hand, virtual operation reduces costs and simplifies configuration, adaptation and expansion of the IT infrastructure today and tomorrow. On the other hand, long-cherished wishes for high data protection are fulfilled, because a private cloud maintains secure, highly encrypted data connections away from the World Wide Web.

"The functional diversity of a cloud, operation and hardware in one's own four walls at the same time – our customers immediately understood these advantages" reports Mario Arcidiacono, specialist for Business Intelligence & Data Warehouse at the Oerlikon Manmade Fibers Segment. The IT architecture also guarantees infrastructure management without downtime, the system and virus protection are automatically kept up to date at all times. Another major advantage is the scalability of the hardware and software, which can be adapted to changing requirements.

OpenStack Summit: Project example with yarn manufacturer from Vietnam presented

With these trump cards and a project example, the Group segment confidently presented itself to a genuine specialist audience in mid-November. At this year's OpenStack Summit in Berlin, where thousands of cloud professionals met, Oerlikon Manmade Fibers Segment CEO Georg Stausberg presented the customer installation at Century Synthetic Fibre Corporation, which supplies many well-known sporting goods manufacturers. The Vietnamese producer of high-quality yarns not only uses the new datacenter, but also the connection to the new "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment as well as an innovative new dashboard solution in prototype status. In this case, the digital instrument panel supports employee communication during shift changes in the yarn factory and introduces agile methods into the work process. The board visualizes the progress of central key figures and operating parameters from the current production process. Based on this, the employees of the successive shifts can now exchange important process and quality information and possible instructions for action within a few minutes in a structured stand-up meeting. "For the customer this means an immediate improvement of the processes, and he can significantly increase the efficiency and quality of his employees' work," assures Joerg Gross, Senior Manager in the IT-architecture team at the Oerlikon Manmade Fibers Segment.

New IT-basis for the Plant Operation Center (POC) already successful established on the market

The fixed connection to the "Common Service Platform (CSP)" of the Oerlikon Manmade Fibers Segment plays a pioneering role in such solutions. This enables services and software updates to be provided smoothly, quickly and automatically. In this way, service applications can transform collected data into instructions or automated commands to secure and improve processes. For example, the secure availability of management solutions such as the Plant Operation Center (POC) for process monitoring can be increased and possible errors can be rectified very quickly. The new digital solution AIM4DTY (AIM = Artificial Intelligence Manufacturing), which was unveiled at the ITMA ASIA + CITME 2018 in Shanghai, China, a few weeks ago, can also be implemented in this way. AIM4DTY uses methods of machine learning, determines probable causes of errors in texturing and helps to improve quality during production.

Launch at ITMA Barcelona 2019

The Oerlikon Manmade Fibers Segment offers such remote-supported services on request. Data will therefore only be transferred to the “Common Service Platform (CSP)” with the customer's consent. In addition, all data is processed in accordance with the new European General Data Protection Regulation (GDPR) and all other international data protection standards. Against this backdrop, the Oerlikon Manmade Fibers Segment plans to provide its datacenter with graded or customer-specific solutions: from complete service to provision with customer training for its own operations. After initial practical experience with several pilot customers, the segment intends to launch its offering on the market next year and officially present it to the textile industry at ITMA 2019 in Barcelona, Spain.

Source:

Oerlikon Marketing, Corporate Communications & Public Affairs