From the Sector

Reset
4 results
Frankfurt Skyline Foto Tobias Rehbein, Pixabay
10.10.2023

6. Symposium ADDITIVE FERTIGUNG in der Textilindustrie

Am 8. November 2023 findet das 6. Symposium ADDITIVE FERTIGUNG in der Textilindustrie in Frankfurt für Interessierte aus Textilindustrie, Kunststoffverarbeitung, Forschung und Praxis statt. Neue Materialien, innovative Fertigungstechnologien und zukunftsweisende Anwendungen sind Themen der Vorträge aus Wissenschaft und Wirtschaft.

Das Programm umfasst die neuesten Entwicklungen beim thermoplastischen Fused Layer Modeling, dem Druck mittels Dispenser oder Siebdruck sowie Materialien und Technologien für Schutzanwendungen und Architektur. Ergänzt werden die Vorträge durch eine begleitende Fachausstellung, auf der Unternehmen, die bereits mit additiven Fertigungs-verfahren arbeiten, ihre Produkte und Dienstleistungen präsentieren.

Veranstalter des Symposiums sind KARL MAYER STOLL R&D GmbH, das Textilforschungsinstitut Thüringen Vogtland e. V. (TITV Greiz) und das Sächsische Textilforschungsinstitut e.V. (STFI).

Am 8. November 2023 findet das 6. Symposium ADDITIVE FERTIGUNG in der Textilindustrie in Frankfurt für Interessierte aus Textilindustrie, Kunststoffverarbeitung, Forschung und Praxis statt. Neue Materialien, innovative Fertigungstechnologien und zukunftsweisende Anwendungen sind Themen der Vorträge aus Wissenschaft und Wirtschaft.

Das Programm umfasst die neuesten Entwicklungen beim thermoplastischen Fused Layer Modeling, dem Druck mittels Dispenser oder Siebdruck sowie Materialien und Technologien für Schutzanwendungen und Architektur. Ergänzt werden die Vorträge durch eine begleitende Fachausstellung, auf der Unternehmen, die bereits mit additiven Fertigungs-verfahren arbeiten, ihre Produkte und Dienstleistungen präsentieren.

Veranstalter des Symposiums sind KARL MAYER STOLL R&D GmbH, das Textilforschungsinstitut Thüringen Vogtland e. V. (TITV Greiz) und das Sächsische Textilforschungsinstitut e.V. (STFI).

Das Symposium ist eingebettet in die internationale Fachmesse für additive Fertigungstechnologien Formnext, der Branchenplattform für Additive Fertigung und industriellen 3D-Druck. Dank einer Vereinbarung der Veranstalter erhalten Teilnehmende des Symposiums den 4-Tage Expo Pass zur Formnext vom 7. - 10. November 2023.

Veranstaltungsort: Messe Frankfurt GmbH, Portalhaus, Ebene VIA, Raum Frequenz 2, Ludwig-Erhard-Anlage 1, 60327 Frankfurt am Main

Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

12.11.2019

BASF 3D Printing Solutions Exhibits Industrial Additive Manufacturing Solutions at Formnext 2019

  • Forward AM is the company’s new brand name
  • Innovative portfolio and services for all AM technologies
  • Outstanding scalable applications and industry partnerships
  • Presentation of 3D printed footwear

BASF 3D Printing Solutions (B3DPS) will be exhibiting at Formnext 2019, the leading sector show for additive-based manufacturing, with an expanded product range and a new brand presence. Sector specialists are warmly invited to meet B3DPS specialists in person from November 19 through 22 at Booth D21, Hall 12.1 at the Frankfurt Trade Fair. With the introduction of its new Forward AM corporate brand, B3DPS continues to pursue its goal of driving industrial scalability as the next phase of additive-based manufacturing. “Forward” stands for future-oriented, leading-edge materials and technology, while “AM” stands for “additive manufacturing”. The new arrow-symbol brand logo and “Innovating Additive Manufacturing” baseline emphasize the company’s dynamic approach to this exciting industrial manufacturing sector.

  • Forward AM is the company’s new brand name
  • Innovative portfolio and services for all AM technologies
  • Outstanding scalable applications and industry partnerships
  • Presentation of 3D printed footwear

BASF 3D Printing Solutions (B3DPS) will be exhibiting at Formnext 2019, the leading sector show for additive-based manufacturing, with an expanded product range and a new brand presence. Sector specialists are warmly invited to meet B3DPS specialists in person from November 19 through 22 at Booth D21, Hall 12.1 at the Frankfurt Trade Fair. With the introduction of its new Forward AM corporate brand, B3DPS continues to pursue its goal of driving industrial scalability as the next phase of additive-based manufacturing. “Forward” stands for future-oriented, leading-edge materials and technology, while “AM” stands for “additive manufacturing”. The new arrow-symbol brand logo and “Innovating Additive Manufacturing” baseline emphasize the company’s dynamic approach to this exciting industrial manufacturing sector.

Extensive product portfolio with expanded service offer
Under the Forward AM brand the company offers end-to-end materials and service solutions along the entire value chain – from an initial product idea right through to its serial manufacture. Forward AM has the most extensive materials portfolio in the industrial 3D printing market today, encompassing powder bed fusion, advanced plastic and metal filaments, and the latest photopolymers.

Source:

BASF 3D Printing Solutions GmbH

PERLON® - The Filament Company überraschte Besucher der Messe Formnext (c) Perlon®
PERLON auf der Messe Formnext
23.11.2018

PERLON® - The Filament Company surprised visitors at the Formnext exhibition

  • The world’s leading exhibition for additive manufacturing takes place in Frankfurt am Main every year
  • With 26,919 visitors, Mesago, organiser of Formnext in Frankfurt, reported a new record with numbers up by 25% on the previous year.

This year Perlon was amongst the 632 exhibitors from 32 countries for the first time, which, represented by Pedex GmbH from Wald-Michelbach, was a co-exhibitor on a stand for companies from the German region Hesse (Hessen Trade and Invest GmbH - HTAI). Some visitors were surprised to discover that the world leading manufacturer of synthetic filaments is also active in the 3D printing filament field. That the Perlon Group, known innovation and market leader in many fields of application, with its decades of experience in the development and manufacture of filaments, has entered into the 3D printing market was well received.

  • The world’s leading exhibition for additive manufacturing takes place in Frankfurt am Main every year
  • With 26,919 visitors, Mesago, organiser of Formnext in Frankfurt, reported a new record with numbers up by 25% on the previous year.

This year Perlon was amongst the 632 exhibitors from 32 countries for the first time, which, represented by Pedex GmbH from Wald-Michelbach, was a co-exhibitor on a stand for companies from the German region Hesse (Hessen Trade and Invest GmbH - HTAI). Some visitors were surprised to discover that the world leading manufacturer of synthetic filaments is also active in the 3D printing filament field. That the Perlon Group, known innovation and market leader in many fields of application, with its decades of experience in the development and manufacture of filaments, has entered into the 3D printing market was well received.

The fact we actually entered the market 6 years ago, was only known to a few experts in the field. In this time, Pedex GmbH had been producing a wide range of performance filaments for a well-known German 3D printer manufacturer, who since then has distributed exclusively under its own brand. The decision, to out ourselves as producer and supplier was taken in summer 2018. This new direction has two main aims, firstly to establish ourselves in the market as a manufacturer of Perlon® 3D printing filaments, producing both small batches and high volume on an industrial scale for professional applications, but secondly and most specifically to continue along the path as a toll manufacturing partner with long-term contracts on an industrial scale.

As a partner with universities/institutions and member of various research networks, we are close to the quickly advancing developments in this field, which is why we were really pleased to welcome Dr. Andreas Baar and Dr (Ing) Thomas Neumeyer onto our stand. They are both members of RESOPT3D (Netzwerk für ressourcenoptimierten 3D-Druck), Germany’s strongest user network for 3D technologies.

Together with Conspir3D in Rheinheim and its owner Jan Giebels, who 10 years ago was a co-founder of the company German RepRap, we were able to forge a partnership to distribute Perlon® 3D printing filaments. With his support we could competently advise trade visitors about filaments and 3D printing as a collective proactive team.

Next year, Formnext will take place from 19th to 22nd November 2019 for the first time in exhibition halls 11 and 12 at the Exhibition Centre in Frankfurt am Main. This will be a debut exhibition for the USA which will be exhibiting as first partner country at Formnext. The USA has a long tradition in the field of additive manufacturing and is one of the most important international exhibiting nations.

(c) BASF
12.11.2018

BASF 3D Printing Solutions presents new products at formnext and announces pioneering strategic alliances for industrial 3D printing

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

New products for photopolymer and laser sinter printing methods from BASF 3D Printing Solutions GmbH (B3DPS) are on show from November 13 to 16 at Stand F20 in Hall 3.1 at this year’s formnext fair in Frankfurt. The BASF subsidiary is also announcing several new partnerships for the development and distribution of groundbreaking 3D printing solutions and products.

B3DPS has entered into a strategic partnership with the US company Origin, San Francisco, California for the further development of photopolymer printing processes. “Within the framework of an open business model, we are combining BASF’s material know-how with Origin’s expertise in printer software programming and the manufacture of the corresponding hardware,” explained Volker Hammes, Managing Director BASF 3D Printing Solutions GmbH. The collaboration has already shown the first signs of success. Origin has developed a new printing method where BASF’s new Ultracur3D photopolymers can be processed particularly well. The technology offers an optimal combination of a good surface finish and high mechanical stability, while also allowing for high material throughput.

B3DPS is working together with Photocentric, a manufacturer of 3D printers and their corresponding software and materials, on the development of new photopolymers and large-format photopolymer printers for mass production of functional components. Based in Peterborough, UK and Phoenix, USA, Photocentric has developed and optimized the use of LCD screens as image generators for its own printing systems. The two partners plan to offer the industry 3D printing solutions that replace parts of traditional manufacturing processes such as injection molding for small series, as well as enabling the production of large components.

The objective of the cooperation with Xunshi Technology, a Chinese printer manufacturer headquartered in Shaoxing, and operates in USA under the name Sprintray, will be opening new fields of application in 3D printing for the Ultracur3D product range of B3DPS.

Ultracur3D specialties for photopolymer printing processes
B3DPS has grouped well-established and new photopolymers designed for the respective 3D printing processes under the brand name Ultracur3D. BASF has developed unique raw materials for its new products that enable special part properties.
“Our Ultracur3D portfolio enables us to offer customers various UV-curable materials for 3D printing that provide far better mechanical properties and higher long-term stability than most available materials,” explained András Marton, Senior Business Development Manager at B3DPS. He added: “These materials have been developed for functional components that are subject to high stress.”

Expansion of distribution network for filaments
Innofil3D, a subsidiary of B3DPS, is entering into a partnership with Jet-Mate Technology, based in Tjanjin, China, for the distribution of plastic filaments in China. In parallel, a distribution agreement has been concluded with M. Holland in Northbrook, USA for the distribution of filaments in USA. “Since the USA is the largest market for filaments, we intend to strengthen our activities there,” said Jeroen Wiggers, Business Director 3DP Solutions for Additive Extrusion at B3DPS, adding: “Asia is another important market for us. We will be developing further distribution channels there and putting our Ultrafuse filaments on the Asian market in 2019.”

BASF’s portfolio of filaments for 3D printing are comprised of two categories; the well-established Innofil3D filaments based on generic polymers for conventional applications and polymer-based Ultrafuse filaments for advanced formulations used in demanding technical applications. One of the broadest filament selections on the market, this portfolio covers customer requirements ranging from prototype to industrial-scale production.

SLS: new 3D printing material with fire protection classification
New flame-resistant Ultrasint Polyamide PA6 Black FR meets UL94 V2 fire protection standards and is a new material class for use in selective laser sintering (SLS) processes, distinguished by high stiffness and thermal stability. In cooperation with one of the global leaders of public transportation vehicles, B3DPS has developed new components that meet vehicle fire protection requirements. “Together with our partner, we are currently producing prototypes, spare parts, and small series components, and are working to further improve flame resistance to meet additional certification specifications,” explained Hammes.
BASF introduced Ultrasint Grey PA6 LM X085 at AMUG this spring and now is followed by another product on show at formnext. Ultrasint PA6 Black LM X085 is based on polyamide 6, and can be processed at 175-185 degrees Celsius therefore making it suitable for most current SLS machines.

B3DPS adds polypropylene to its 3D printing portfolio
Through the acquisition of Advanc3D Materials GmbH in July 2018, B3DPS has expanded its range with numerous materials for use on laser sinter machines, including polyamide Adsint PA12, Adsint PA11, Adsint PA11CF and Adsint TPU flex 90.
Ultrasint PP is a special highlight. This polypropylene-based product exhibits outstanding mechanical properties and is frequently used in standard industrial production as it offers a good balance between price and performance. Ultrasint PP is distinguished by excellent plasticity, low moisture uptake, and resistance to liquids and gases. Prototypes and small batches can now be produced from the same material as used for traditional serial production. Post treatments such as thermoforming, sealing, and dyeing can be performed after printing.

More information:
BASF 3D printing materials
Source:

BASF 3D Printing Solutions GmbH