From the Sector

Reset
200 results
(c) TNO/Fraunhofer UMSICHT
02.06.2023

Fraunhofer: New guide to the future of plastics

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

How does a future-proof, circular and sustainable plastics economy look like? The answer is a balance ranging from plastics reduction to a sustainable use of recyclable plastics. After all, the increasing demand for plastics in high-value applications such as food packaging, car parts or synthetic textiles requires a holistic change. With four strategic approaches, researchers from the German institute Fraunhofer UMSICHT and the Dutch institute TNO now provide insights into how this future scenario could look like in their recently published white paper "From #plasticfree to future-proof plastics". Both organizations also start a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP aimed at removing existing barriers and sharing of promising solutions.

Versatile and inexpensive materials with low weight and very good barrier properties: That's what plastics are. In addition to their practical benefits, however, the materials are also associated with a significant share of mankind's greenhouse gas emissions. The production and use of plastics cause environmental pollution and microplastics, deplete fossil resources and lead to import dependencies. At the same time, alternatives - such as glass packaging - could cause even more environmental burden or have poorer product properties.

Researchers from TNO and Fraunhofer UMSICHT have elaborated a white paper that provides a basis for the transformation of plastics production and use. They consider the integration of the perspectives of all stakeholders and their values and the potential of current and future technologies. In addition, the functional properties of the target product, the comparison with alternative products without plastics, and their impact in a variety of environmental, social and economic categories over the entire life cycle are crucial. In this way, a systematic assessment and ultimately a systematic decision as to where we can use, reject or replace plastics can be realized.

Strategies for the Circular Economy
As a result, the researchers describe four strategic approaches for transforming today's largely linear plastics economy into a fully circular future: Narrowing the Loop, Operating the Loop, Slowing the Loop, and Closing the Loop. By Narrowing the Loop, the researchers recommend, as a first step, to reduce the amount of materials mobilized in a circular economy. Operating the Loop refers to using renewable energy, minimizing material losses, and sourcing raw materials sustainably. For Slowing the Loop, measures are needed to extend the useful lifetime of materials and products. Finally, for Closing the Loop, plastics must be collected, sorted and recycled to high standards.

Individual strategies fall under each of the four approaches. While the ones under Operating the Loop (O strategies) should be applied in parallel and as completely as possible. According to the researchers, the decision for the strategies in the other fields (R strategies) requires a complex process: “Usually, more than one R-strategy can be considered for a given product or service. These must be carefully compared in terms of their feasibility and impact in the context of the status quo and expected changes”, explains Jürgen Bertling from Fraunhofer UMSICHT. The project partners have therefore developed a guiding principle for prioritization based on the idea of the waste hierarchy.

A holistic change, as we envision it, can only succeed if science, industry, politics and citizens work together across sectors. “This implies several, partly quite drastic changes at 4 levels: legislation and policy, circular chain collaboration, design and development, and education and information. For instance, innovations in design and development include redesign of polymers to more oxygen rich ones based on biomass and CO2 utilisation. Current recycling technologies have to be improved for high quantity and quality recycling,” explains Jan Harm Urbanus from TNO.

Hands-on platform for cross-sector collaboration
“Therefore, in a next step, TNO and Fraunhofer UMSICHT are building a hands-on platform for plastics in a circular economy: European Circular Plastics Platform – CPP," explains Esther van den Beuken, Principal Consultant from TNO. It will give companies, associations and non-governmental organizations the opportunity to work together on existing barriers and promising solutions for a Circular Plastics Economy. The platform will also offer its members regular hands-on workshops on plastics topics, roundtable discussions on current issues, and participation in multi-client studies on pressing technical challenges. Regular meetings will be held in the cross-border region of Germany and the Netherlands as well as online. The goal is to bring change to the public and industry.

Source:

Fraunhofer UMSICHT

(c) Lenzing AG
01.06.2023

Lenzing celebrates 40th anniversary of LENZING™ Acetic Acid Biobased

Lenzing Group, a global producer of wood-based specialty fibers, is celebrating the 40th anniversary of its biorefinery and co-product brand LENZING™ Acetic Acid Biobased. The brand was first introduced on May 4, 1983, and has since become one of the leading and most trusted biobased acetic acid providers.

Over the past 40 years, LENZING™ Acetic Acid Biobased, which has a reduced carbon footprint that is 85% lower than that of fossil-based acetic acid, has continued to gain trust and support from customers. Specialty chemical company Evonik, and food production company Speyer & Grund Group, have been incorporating LENZING™ Acetic Acid Biobased in the production of their products since 1983. LENZING™ Acetic Acid Biobased has also been in high demand from the hygiene industry during the COVID-19 pandemic as an all-purpose cleaning agent in conventional and green products.

Lenzing Group, a global producer of wood-based specialty fibers, is celebrating the 40th anniversary of its biorefinery and co-product brand LENZING™ Acetic Acid Biobased. The brand was first introduced on May 4, 1983, and has since become one of the leading and most trusted biobased acetic acid providers.

Over the past 40 years, LENZING™ Acetic Acid Biobased, which has a reduced carbon footprint that is 85% lower than that of fossil-based acetic acid, has continued to gain trust and support from customers. Specialty chemical company Evonik, and food production company Speyer & Grund Group, have been incorporating LENZING™ Acetic Acid Biobased in the production of their products since 1983. LENZING™ Acetic Acid Biobased has also been in high demand from the hygiene industry during the COVID-19 pandemic as an all-purpose cleaning agent in conventional and green products.

Pioneering a carbon neutral future in the biorefinery segment with a new offering
To mark the important occasion, Lenzing will introduce its first carbon neutral LENZING™ Acetic Acid Biobased to meet the growing sustainability needs of industries which predominately rely on fossil-based materials. Similar to the standard LENZING™ Acetic Acid Biobased, the carbon neutral LENZING™ Acetic Acid Biobased is produced using sustainably sourced beech wood as a universal replacement for non-renewable raw materials such as crude oil. By calculating, reducing and offsetting emissions during production processes, this expansion will create a more sustainable supply chain with highly functional products across various industries. From now on, Lenzing customers across the food, pharmaceutical, cosmetics, chemical and textile industries will be able to choose between carbon neutral and reduced carbon footprint acetic acid products.

Advancing circularity and carbon neutrality through efficient use of valuable resources
Lenzing’s biorefinery concept ensures that 100% of wood components are used to produce pulp for Lenzing’s botanic fibers, biorefinery products, as well as bioenergy, which is used to power Lenzing’s facilities. This makes Lenzing’s biorefinery sites almost fully energy self-sufficient to remain as carbon neutral as possible. To ensure a low carbon footprint, rail transportation is the preferred means for transporting LENZING™ biorefinery products, with trucks being leveraged in regions where rail transportation is not available.

Together with ClimatePartner, a recognized global leader in the design, development, and delivery of corporate climate action programs, Lenzing strives to reduce carbon emissions to net-zero through a mix of higher production efficiencies, use of renewable energy sources, low-carbon materials, and the dedicated support of an external nature-based carbon removal project. For instance, to offset remaining carbon emissions that cannot be reduced, Lenzing works with ClimatePartner to support and finance the switch to biomass as an energy source at a ceramic factory in Kitambar in northeastern Brazil. Using natural waste materials, like coconut shells, as renewable biomass for its energy production, the factory is able to produce roof tiles in a more climate-friendly way while saving on carbon emissions. Besides contributing to the fuel switch, the project also helps to reduce the deforestation rate in Brazil and avoid methane emissions that could result from the uncontrolled rotting of biomass.

More information:
Lenzing biobased acetic acid
Source:

Lenzing Group

24.05.2023

SGL Carbon SE: Annual General Meeting 2023

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

The shareholders of SGL Carbon SE approved all agenda items at the Annual General Meeting on May 9, 2023. The Annual General Meeting, which was held virtually, was attended by up to 114 electronically connected shareholders who, together with the postal votes submitted, represented 64.64% of the share capital.

CEO Dr. Torsten Derr began his speech with a review of SGL Carbon's two-year transformation phase. "In two years, we have been able to increase our sales by 23.5% and adjusted EBITDA by as much as 86.2%. In parallel, we reduced our debt by 40.4%," Dr. Derr elaborated. He also reported on the past financial year and the expectations for the future economic development of the company. In doing so, he also addressed SGL Carbon's growth markets in detail. "Over the past two years, we have made SGL fit for the future. With our products, we serve industries that significantly reflect the trends for the future: climate-friendly mobility, renewable energies and digitalization," he explained.

After 14 years on the Supervisory Board of SGL Carbon, this was Dr. h.c. Susanne Klatten's last Annual General Meeting as Chairwoman of the Supervisory Board. She had already informed the Company on February 14, 2023, that she would be leaving the Board at the end of this Annual General Meeting. As the largest shareholder, Dr. h.c. Klatten will remain associated with SGL Carbon through SKion GmbH.

As proposed, the Annual General Meeting elected Prof. Dr. Frank Richter as a shareholder representative on the Supervisory Board to succeed Dr. h.c. Susanne Klatten. Following the Annual General Meeting, the constituent meeting of the Supervisory Board elected Prof. Dr. Richter as Chairman of the Supervisory Board. Prof. Dr. Richter is Managing Director of SKion GmbH, Bad Homburg, which holds a stake of approximately 28.55% in SGL Carbon SE. Furthermore, Ingeborg Neumann, Managing Partner of Peppermint Holding GmbH, Berlin, was elected to the Supervisory Board of SGL Carbon SE for a further term of office.

Source:

SGL Carbon SE

(c) PIERO D’ANGELO / C.L.A.S.S.
22.05.2023

Project "Grow Your Own Couture" by Piero D’angelo wins IMAGINING SUSTAINABLE FASHION AWARD 2023

“Grow Your Couture” by Piero D'angelo, the winning project of the IMAGINING SUSTAINABLE FASHION (ISFA) competition was announced during a webinar broadcast on 18 May attended by Giusy Bettoni CEO of C.L.A.S.S. Eco Hub, Anna Detheridge President of Connecting Cultures and ISFA ambassadors Valentina Suarez, co-founder and CEO of Universo Mola and Vishal Tolambia winner of the 2022 edition.
 
Piero D'angelo's project was the best among the 110 proposals received after the international call for proposals launched on 27 October 2022.
 

“Grow Your Couture” by Piero D'angelo, the winning project of the IMAGINING SUSTAINABLE FASHION (ISFA) competition was announced during a webinar broadcast on 18 May attended by Giusy Bettoni CEO of C.L.A.S.S. Eco Hub, Anna Detheridge President of Connecting Cultures and ISFA ambassadors Valentina Suarez, co-founder and CEO of Universo Mola and Vishal Tolambia winner of the 2022 edition.
 
Piero D'angelo's project was the best among the 110 proposals received after the international call for proposals launched on 27 October 2022.
 
Piero D'Angelo, 36, a graduate in Fashion Womenswear from the Royal College of Art in London and in Textile Design from Central Saint Martins, is a Fashion and Textile Designer with a research focus on biotechnology in the fashion industry. In 2022 he founded his Fashion & Textile Design studio experimenting with a multidisciplinary approach on the importance of natural materials and Biodesign. From 2018 to 2022 Piero D'Angelo was a resident and then Product Researcher & Developer at Open Cell (Biotech Research Park), a biotech start-up community in London. He was awarded the Dorothy Waxman Textile Design Prize in 2015 and semi-finalist for the LVMH Prize in 2020.
 
In his communication project, 'Grow Your Own Couture' D'Angelo imagines a future scenario where it will be possible to grow one's own clothes through living organisms such as lichens that are able to absorb pollution. But the project also wants to communicate a return to nature and above all care and protection towards it. In fact, the user is not simply a user of fashion, but through a kit is part of the process of growth, care and creation of the garment, thus abandoning the traditional paradigms of fashion. The project wants to completely re-imagine the way fashion could be designed, produced and used, proposing not only a product, but also a system that wants to collaborate with nature instead of polluting or exploiting it.

Source:

C.L.A.S.S.

05.05.2023

SGL Carbon: Business Development in Q1 2023

  • Sales increase by 4.7% to €283.7 million in Q1 2023
  • Adjusted EBITDA improves by 9.0% to €40.1 million
  • Growth based in particular on strong demand from the semiconductor industry

SGL Carbon generated Group sales of €283.7 million in Q1 2023 (Q1 2022: €270.9 million). This corresponds to an increase of €12.8 million or 4.7% compared to the same period of the previous year. Increased demand for specialty graphite components for the semiconductor industry from the Graphite Solutions business unit contributed in particular to the pleasing increase in sales. But also the Process Technology and Composite Solutions business units continued their positive business development.

Accordingly, adjusted EBITDA (EBITDApre) improved by 9.0% to €40.1 million in the reporting period (Q1 2022: €36.8 million).

  • Sales increase by 4.7% to €283.7 million in Q1 2023
  • Adjusted EBITDA improves by 9.0% to €40.1 million
  • Growth based in particular on strong demand from the semiconductor industry

SGL Carbon generated Group sales of €283.7 million in Q1 2023 (Q1 2022: €270.9 million). This corresponds to an increase of €12.8 million or 4.7% compared to the same period of the previous year. Increased demand for specialty graphite components for the semiconductor industry from the Graphite Solutions business unit contributed in particular to the pleasing increase in sales. But also the Process Technology and Composite Solutions business units continued their positive business development.

Accordingly, adjusted EBITDA (EBITDApre) improved by 9.0% to €40.1 million in the reporting period (Q1 2022: €36.8 million).

Sales development
In the first three months of fiscal year 2023, the business unit Graphite Solutions was the main driver of SGL Carbon's growth with an increase in sales of €21.3 million or 17.8%. This is due in particular to the reallocation of production capacities from the solar industry market segment to the semiconductor industry. The Process Technology (+€6.6 million) and Composite Solutions (+€4.0 million) business units also contributed to the increase in sales.

The Carbon Fibers (CF) business unit recorded a decline in sales of €24.0 million in the reporting period. The decline is mainly due to the scheduled expiry of the attractive supply contract for the BMW i3 in the middle of last year. Freed-up production capacities were compensated by orders from the wind industry in the 2nd half of 2022. But the necessary construction of wind turbines in Europe is currently stalling. Low building permits and high manufacturing costs are temporarily hampering the construction and expansion of wind parks and therefore the necessary increase in renewable energy.

Earnings development
In line with the sales development combined with higher capacity utilization and positive product mix effects, adjusted EBITDA (EBITDApre) improved from €36.8 million to €40.1 million in Q1 2023, representing a quarter-on-quarter increase of 9.0%.

Taking into account depreciation and amortization of €14.3 million (Q1 2022: €14.1 million) as well as one-off effects and non-recurring items of minus €0.1 million, EBIT in the reporting period amounted to €25.7 million (Q1 2022: €31.2 million). It should be noted that Q1 of the previous year was positively impacted by one-off effects and and non-recurring items amounting to €8.5 million. Accordingly, net profit for the period of €15.3 million was lower than in the same quarter of the previous year (€21.5 million).

Debt, equity and capitel expenditure
Net financial debt increased slightly to €174.2 million as of March 31, 2023 (Dec. 31, 2022: €170.8 million). The leverage ratio remains unchanged at 1.0. Due to the positive consolidated net income, the equity ratio increased again slightly compared to the end of fiscal 2022 to 39.5% (Dec. 31, 2022: 38.5%).

Looking at the capital expenditure in Q1 2023, it amounted to €19.0 million, which is higher than the average values of the previous quarters. "At the beginning of 2023, we had already announced the expansion of our investment activities to expand production capacities in the Graphite Solutions business unit. In previous years, our capital expenditure was in line with depreciation and amortization. In addition to these approximately €60 million, we will invest further €20 to €30 million in 2023, which will be financed by advance payments in the context of long-term supply contracts from our customers in the semiconductor industry. Our semiconductor customers secure future production capacities for graphite components, which are needed for their own growth. In return, SGL Carbon's long-term supply contracts will enable future profitable growth," said Dr. Torsten Derr, CEO of SGL Carbon.

Outlook
In line with the business performance in the first three months of 2023, the company confirms the sales and earnings guidance issued on March 23, 2023.

For the financial year 2023, Group sales are expected to be at the prior-year level and  EBITDApre between €160 - 180 million. Taking into account depreciation and amortization, EBITpre is forecast to be between €100 - 120 million. Furthermore, free cash flow at the end of fiscal 2023 is expected to be at the prior-year level and return on capital employed (ROCE) between 10% and 12%.

Source:

SGL CARBON SE

21.04.2023

Rieter: Annual General Meeting 2023

Shareholders Adopt All Motions Proposed by the Board of Directors

  • Distribution of a dividend of CHF 1.50 per share approved
  • Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
  • All members of the Board of Directors who stood for re-election were elected
  • Thomas Oetterli newly appointed to the Board of Directors
  • KPMG newly elected as statutory auditors
  • Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Shareholders Adopt All Motions Proposed by the Board of Directors

  • Distribution of a dividend of CHF 1.50 per share approved
  • Remuneration Report 2022 and future remuneration of Board of Directors and Group Executive Committee formally accepted
  • All members of the Board of Directors who stood for re-election were elected
  • Thomas Oetterli newly appointed to the Board of Directors
  • KPMG newly elected as statutory auditors
  • Amendments to the Articles of Association approved

On April 20, 2023, 325 shareholders, who represent 66.2% of the share capital, attended the 132nd Annual General Meeting of Rieter Holding Ltd.

Dividend
The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 1.50 per share. The dividend for the 2022 financial year will be paid on April 24, 2023.

Annual Report, Financial Statements, Consolidated Financial Statements and Remuneration Report
The shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, financial and consolidated financial statements for 2022. Moreover, they formally approved the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

By way of a consultative vote, the shareholders also approved the Remuneration Report 2022.

Remuneration of the Members of the Board of Directors and the Group Executive Committee
In two separate binding votes, the proposed maximum total remuneration of the members of the Board of Directors and the Group Executive Committee for the 2024 financial year was approved.

Re-Election of the Members of the Board of Directors
The Chairman of the Board, Bernhard Jucker, and the Directors, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi, Sarah Kreienbühl and Daniel Grieder were confirmed for a further one-year term of office. In addition, Thomas Oetterli was newly elected to the Board of Directors for a term of office.

The members of the Remuneration Committee who were standing for election –
Hans-Peter Schwald, Bernhard Jucker and Sarah Kreienbühl – were likewise re-elected for a one-year term of office.

Election of KPMG as Statutory Auditors
The shareholders also adopted the proposal of the Board of Directors to elect KPMG AG, Zurich, as new statutory auditors for the financial year beginning January 1, 2023.

Amendments to the Articles of Association
The shareholders further approved the proposals of the Board of Directors to amend the Articles of Association of Rieter Holding Ltd., in order to implement the requirements of the reform of the Swiss company law, which came into force on January 1, 2023.

Source:

Rieter Holding Ltd.

14.04.2023

Carbios presents its 2022 Annual Results

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

Carbios, a compnay in the development and industrialization of biological technologies for reinventing the life cycle of plastics and textiles, announces its operating and financial results for the year 2022. The financial statements as of December 31, 2022, were approved by the Company’s Board of Directors at their meeting on April 5, 2023.

  • Project to build, in France, the world’s first PET biorecycling plant: Progress in line with 2025 unit commissioning target6
  • Excellent results from the demonstration plant validating the industrial scale-up of Carbios technology
  • Carbios licensing documentation ready for worldwide industrial and commercial deployment
  • Long-term exclusive strategic partnership with Novozymes to ensure supply of enzymes at industrial scale for the Reference Unit and all future licensee plants
  • Creation of fiber-to-fiber consortium with On, Patagonia, Puma, PVH Corp., and Salomon
  • CE-PET research project successfully completed
  • Participation in WhiteCycle project co-funded by Horizon Europe and coordinated by Michelin
  • Publication of scientific articles in the prestigious Biophysical Journal and in Chemical Reviews
  • Carbios hosts world’s first PET Biorecycling Summit
  • Carbios publishes first Sustainability Report and outlines objectives for environmental, social and governance (ESG) initiatives
  • Carbios joins Ellen MacArthur Foundation’s circular economy network
  • €30 million European Investment Bank loan drawn down in 2022
  • Group’s cash position of €101 million as of December 31, 2022
More information:
Carbios plastics life cycle Recycling
Source:

Carbios

05.04.2023

MUNICH FABRIC START, BLUEZONE & VIEW moved to July

With a current booking level of almost 90% for the international fabric trade show MUNICH FABRIC START, KEYHOUSE, THE SOURCE and BLUEZONE, Munich Fabric Start Exhibitions GmbH is starting the new season for Autumn.Winter 24/25 on a strong footing. From the organisers' point of view, the main reason for the high level of acceptance is the rebalancing of the July dates.

The international fabric trade show MUNICH FABRIC START (18 to 20 July), the innovation hub KEYHOUSE, theb one-stop sourcing platform THE SOURCE and the international denim trade show BLUEZONE (18 and 19 July) will move ahead and at the same time increase their relevance in the international trade show scene. For a large part of the visitors, the earlier date is closer to the collection rhythms and offers more time for further developments.

With a current booking level of almost 90% for the international fabric trade show MUNICH FABRIC START, KEYHOUSE, THE SOURCE and BLUEZONE, Munich Fabric Start Exhibitions GmbH is starting the new season for Autumn.Winter 24/25 on a strong footing. From the organisers' point of view, the main reason for the high level of acceptance is the rebalancing of the July dates.

The international fabric trade show MUNICH FABRIC START (18 to 20 July), the innovation hub KEYHOUSE, theb one-stop sourcing platform THE SOURCE and the international denim trade show BLUEZONE (18 and 19 July) will move ahead and at the same time increase their relevance in the international trade show scene. For a large part of the visitors, the earlier date is closer to the collection rhythms and offers more time for further developments.

What's new?
Due to the early date of MUNICH FABRIC START and BLUEZONE, the Munich trade show duo with KEYHOUSE and THE SOURCE formats will function even more strongly as an impulse generator and leading international event. The Munich location will also be strengthened by the relocation of the DMI Fashion Day from Düsseldorf to the Bavarian capital. The first DMI FASHION DAY LIVE will take place the day before the next MUNICH FABRIC START at the MOC.

The course will also be set anew in September: The date, which remains important for the industry, will in future be occupied by reVIEW - the new format of the VIEW PREMIUM SELECTION for follow-ups and trends as well as new market developments. On an area of around 2,500 square metres, the first reVIEW Autumn.Winter 24/25 will be held on 13 and 14 September 2023 on the Zenith grounds in Motorworld.

Source:

MUNICHFABRICSTART Exhibitions GmbH

31.03.2023

EURATEX at 1 year EU Textile Strategy – Yes, but …

On 30 March 2022, the European Commission presented its vision for the future of the textile industry. The strategy mainly focuses on reducing the environmental footprint and promote sustainability and transparency in the value chain.

EURATEX has welcomed the publication of the strategy, as it recognises the strategic importance of the European textile industry, and its core competitive values of quality and creativity. At the same time, the association has warned that translating that vision into reality is a delicate process, as the industry needs to reconcile sustainability with competitiveness. Making the green (and digital) transition should make companies stronger; the benefits should outweigh the costs.

On 30 March 2022, the European Commission presented its vision for the future of the textile industry. The strategy mainly focuses on reducing the environmental footprint and promote sustainability and transparency in the value chain.

EURATEX has welcomed the publication of the strategy, as it recognises the strategic importance of the European textile industry, and its core competitive values of quality and creativity. At the same time, the association has warned that translating that vision into reality is a delicate process, as the industry needs to reconcile sustainability with competitiveness. Making the green (and digital) transition should make companies stronger; the benefits should outweigh the costs.

This premise had a serious blow by the Russian war in Ukraine, which erupted at almost the same time when the strategy was launched, and has dramatically changed the economic context. Energy prices increased by a factor of 10 (!), putting the European industry at a significant disadvantage with its global competitors, leading to company shutdowns or relocations. Extended lock downs in China and defensive trade policies in the US and elsewhere have further generated uncertainty on the market and disrupted supply chains.

Today, one year after its publication, EURATEX remains carefully optimistic about the implementation of the strategy, but needs to warn against some important pitfalls on the road ahead.

  1. Despite these turbulent times, the Commission is moving ahead “swiftly” in translating their EU Textile Strategy into (draft) legislation. At present, at least 16 pieces of legislation are on the table, which will turn the textile industry into a strictly regulated sector. The quality of this new regulatory framework is critical to the success of the strategy: upcoming rules need to be coherent, technically feasible and enforceable, and have a minimal cost for SMEs. EURATEX calls for a realistic timetable and “competitiveness test” for each piece of legislation before it is adopted.
  2. Textile companies need to be informed and supported to comply with this new framework. This requires substantial funding which should be earmarked exclusively to the sector, covering areas of innovation and digitalisation, skills development, support to start ups and internationalisation, as well as access to affordable energy. In this regard, EURATEX calls on the Commission to translate the current “good intentions” into concrete decisions.
  3. The EU strategy will not work if there is no demand for sustainable textiles, both from individual consumers and public authorities (procurement). Concrete measures need to be taken to offer a competitive advantage to sustainable and high quality textile products, e.g. through a different VAT rate, strict procurement rules, closer cooperation between the brands/retailers, producers and consumers.
  4. The EU strategy could also fail, if the global dimension of the textile industry is ignored. Up to 80% of clothing products are produced outside the EU; these products need to comply with the new framework, but it remains unclear how to ensure that level playing field. Market surveillance needs to be stepped up massively – also targeting on line sales – but this would require significant efforts from member states, which are not available as of today.

Despite these important challenges, EURATEX remains committed to the successful implementation of the EU Textile Strategy. Director General Dirk Vantyghem commented: “We want to be a global leader in sustainable textiles, building on the entrepreneurship, quality and creativity of nearly 150,000 European textile companies. Creating this new framework is an incredible challenge, requiring a close dialogue between the industry and the regulator. But if well designed and carefully implemented, it can set a new era for the European textile industry”.

Source:

Euratex

24.03.2023

adidas: FY Results of 2022 and Outlook for 2023

Major developments FY 2022

  • Currency-neutral revenues up 1% reflecting growth in all markets except Greater China
  • Double-digit increases in North America and Latin America, EMEA up high single digits
  • Gross margin declines to 47.3% due to strong increase in supply chain costs and discounting  
  • Operating profit at € 669 million, including one-off costs of € 312 million
  • Operating margin decreases to 3.0%  
  • Net income (continuing operations) of € 254 million includes € 350 million one-off costs
  • Executive and Supervisory Boards propose dividend of € 0.70 per share

Major developments Q4 2022

Major developments FY 2022

  • Currency-neutral revenues up 1% reflecting growth in all markets except Greater China
  • Double-digit increases in North America and Latin America, EMEA up high single digits
  • Gross margin declines to 47.3% due to strong increase in supply chain costs and discounting  
  • Operating profit at € 669 million, including one-off costs of € 312 million
  • Operating margin decreases to 3.0%  
  • Net income (continuing operations) of € 254 million includes € 350 million one-off costs
  • Executive and Supervisory Boards propose dividend of € 0.70 per share

Major developments Q4 2022

  • Currency-neutral revenues decline 1% impacted by termination of Yeezy partnership
  • Gross margin at 39.1% reflecting increased supply chain costs and higher discounting
  • Operating loss of € 724 million
  • Net loss from continuing operations of € 482 million

Outlook for 2023
Underlying operating profit expected to be around break-even level

In 2023, adidas expects currency-neutral revenues to decline at a high-single-digit rate as macroeconomic challenges and geopolitical tensions persist. Elevated recession risks in Europe and North America as well as uncertainty around the recovery in Greater China continue to exist. The company’s revenue development will also be impacted by the initiatives to significantly reduce high inventory levels. In addition, while the company continues to review future options for the utilization of its Yeezy inventory, the guidance already reflects the revenue loss of around € 1.2 billion from potentially not selling the existing stock. Accounting for the corresponding negative operating profit impact of around € 500 million, the company’s underlying operating profit is projected to be around the break-even level in 2023.

Reported operating loss of € 700 million projected
Should the company irrevocably decide not to repurpose any of the existing Yeezy product going forward, this would result in the potential write-off of the existing Yeezy inventory and would lower the company’s operating profit by an additional € 500 million this year. In addition, adidas expects one-off costs of up to € 200 million in 2023. These costs are part of a strategic review the company is currently conducting aimed at reigniting profitable growth as of 2024. If all these effects were to materialize, the company expects to report an operating loss of € 700 million in 2023.

Source:

adidas AG

24.03.2023

Autoneum: All proposals approved at Annual General Meeting 2023

At the Annual General Meeting of Autoneum Holding Ltd on 24th March 2023, a clear majority of the shareholders approved the introduction of a capital band in the amount of approximately CHF 100 million net proceeds to finance the acquisition of Borgers Automotive. The proposal to waive the payment of a dividend for the 2022 financial year in view of the lower net result was also approved. In addition, Board member Rainer Schmückle as well as CEO Matthias Holzammer were given a farewell.

221 shareholders attended today’s Annual General Meeting of Autoneum Holding Ltd in Winterthur. 66.48 percent of the share capital was represented.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements for 2022. The proposal of the Board of Directors to waive the payment of a dividend for the financial year 2022 due to the lower net result was also approved by the Annual General Meeting.

In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Group Executive Board and the Board of Directors by a large majority of votes.

At the Annual General Meeting of Autoneum Holding Ltd on 24th March 2023, a clear majority of the shareholders approved the introduction of a capital band in the amount of approximately CHF 100 million net proceeds to finance the acquisition of Borgers Automotive. The proposal to waive the payment of a dividend for the 2022 financial year in view of the lower net result was also approved. In addition, Board member Rainer Schmückle as well as CEO Matthias Holzammer were given a farewell.

221 shareholders attended today’s Annual General Meeting of Autoneum Holding Ltd in Winterthur. 66.48 percent of the share capital was represented.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements for 2022. The proposal of the Board of Directors to waive the payment of a dividend for the financial year 2022 due to the lower net result was also approved by the Annual General Meeting.

In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Group Executive Board and the Board of Directors by a large majority of votes.

Chairman Hans-Peter Schwald and the other members of the Board of Directors Liane Hirner, Norbert Indlekofer, Michael Pieper, Oliver Streuli and Ferdinand Stutz were confirmed in office for another year. Hans-Peter Schwald, Norbert Indlekofer, Ferdinand Stutz and Oliver Streuli were re-elected to the Compensation Committee.

The consultative vote on the 2022 remuneration report was approved by 85.55%. The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2023 financial year as well as the other proposals were also approved by a large majority.

With 99.03%, a clear majority of the shareholders approved a capital band authorizing a capital increase of approximately CHF 100 million net proceeds. The purpose of the capital increase is to partially finance the acquisition of the automotive business of the Borgers Group announced by Autoneum on January 9, 2023. The Annual General Meeting also approved the other proposals of the Board of Directors for partial amendments to the Articles of Association.

Rainer Schmückle did not stand for re-election. He had been Vice Chairman of the Board of Directors, Chairman of the Audit Committee and member of the Strategy and Sustainability Committee since Autoneum became independent in 2011. CEO Matthias Holzammer, who will leave Autoneum for family reasons, was also bid farewell.

At the same time, Hans-Peter Schwald welcomed the new CEO Eelco Spoelder, who will take over the management of the Group from Matthias Holzammer on March 27, 2023: "With Eelco Spoelder, Autoneum gains an accomplished leader with many years of experience in the automotive supply industry. At Faurecia and previously at Continental, Mr. Spoelder has successfully proven that he can ensure strategic continuity and operational excellence even in a difficult market environment. I and the other members of the Board of Directors warmly welcome Eelco Spoelder and look forward to our future cooperation."

Source:

Autoneum Holding AG

02.03.2023

Recycling Atelier Augsburg and Kelheim Fibres cooperate

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, has joined Recycling Atelier Augsburg. Recycling Atelier Augsburg is a unique centre for research and development in the field of textile recycling. It is located at the Institut für Textiltechnik Augsburg an affiliated institute of Augsburg University of Applied Sciences. The two institutions founded the Recycling Atelier in June 2022 together with twelve partners from the German textile industry.

In the Recycling Atelier, the focus is on the triad of technical and ecological sense as well as economic benefit. In this way, the partners of the Recycling Atelier are standing up against fast fashion, outsourced corporate responsibility and a general decline in raw material quality, which often fuels downcycling - the low-quality reuse - of materials.

As a model factory, the Recycling Atelier Augsburg combines the most important processes of textile recycling and offers holistic and comprehensive research along the value chain," explains Georg Stegschuster, head of the Recycling Atelier Augsburg. The scientists research on all process steps of textile recycling: from material analysis to sorting, preparation and textile processing to sustainable product design. Comprehensive data collection and the use of artificial intelligence as well as innovative materials play a central role.

Kelheim Fibres is a producer of high-quality viscose fibres, which consist of cellulose, the main component of the renewable raw material wood, and are used worldwide for products in areas such as hygiene, textiles, and technical applications.

"In New Business Development as well as Fibre and Application Development, we follow the Open Innovation concept - the cooperation with the Recycling Atelier offers us an ideal platform for this. Here we work with partners to advance sustainability and performance," explains Maik Thiel, project manager at Kelheim Fibres.

Recycled cotton fibres are often very short or of uneven length, which makes further processing of 100 % recycled material a challenge. Adding speciality fibres from Kelheim Fibres should enable the production of high-quality new products, such as nonwovens. In the future, the fibres provided by Kelheim Fibres will also be made from recycled pulp.

Source:

Kelheim Fibres GmbH

Texaid
02.03.2023

New project “Transform Textile Waste into Feedstock”

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Textile waste is a problem in Europe. Out of 7-7.5 million tonnes of textiles discarded every year, 30-35 % are collected separately – and of that quantity, 15-20 % are sorted by medium and larger sorting facilities within the EU. After sorting, 60 % still qualify as wearable clothes, however after a second or third collection-loop, all of the textiles become non-wearable sooner or later. Therefore, fibre-to-fibre recycling is becoming increasingly important to preserve the valuable resources.
 
The textile recycling value chain is not yet mature, but we are on the verge of a turning point, as different fibre-recycling technologies are deployed on a large scale. If successful, the textile recycling industry could reach a recycling rate of 18 to 26 percent of gross textile waste in 2030. This would create economic, social and environmental value that could total 3.5 to 4.5 billion euros in 2030.

Today, there is a sorting gap to achieve a circular economy for textiles in Europe. To feed this new circular value chain, a significant sorting-capacity increase is needed with 150 to 250 sorting and recycling facilities nearby, as the McKinsey-study “turning waste into value” assessed.

There is also a technology and capacity gap in sorting for reuse and recycling to ensure that high quality raw materials from non-wearable textile waste can be made available on a large scale. This is why the “Transform Textile Waste into Feedstock” project was initiated by TEXAID, within the ReHubs initiative together with well-known stakeholders of the textile value chain.

The major outcome of this project will be a sorting-factory blueprint fulfilling the requirements to the future needs of fibre-to-fibre recycling, enabling the future of more sustainable textiles by using recycled fibres. TEXAID, who is leading the project, is committed to build and operate scalable sorting facilities across Europe, the first with a capacity of 50,000 tonnes by the end of 2024.

Companies like Concordia, CuRe Technology, Decathlon, Inditex, Indorama Ventures, L’Atelier des Matières, Lenzing, Marchi & Fildi, PurFi, Södra, Worn Again and others are taking part in the project to jointly evaluate technologies and the business case for scaled sorting for reuse and recycling. ITA Academy GmbH (in cooperation with RWTH Aachen) together with CETIA has been commissioned for the assessment of technologies. The outcome will be an innovative sorting system 4.0, building on cross-functional technologies with digitalization and automation are at the heart.

(c) Global Fashion Agenda
17.02.2023

Global Fashion Summit: Copenhagen Edition 2023 takes place in June

Global Fashion Summit, a leading international forum for sustainability in fashion, will convene core stakeholders across the fashion ecosystem and parallel industries to drive tangible action on social and environmental sustainability. The Summit is presented by Global Fashion Agenda (GFA). GFA is a non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2023 will take place on 27-28 June in Copenhagen, Denmark.

The theme of Global Fashion Summit: Copenhagen Edition 2023 is ‘Ambition to Action’. Under this premise, the Summit will present content experiences focused on tangible impact.

Global Fashion Summit, a leading international forum for sustainability in fashion, will convene core stakeholders across the fashion ecosystem and parallel industries to drive tangible action on social and environmental sustainability. The Summit is presented by Global Fashion Agenda (GFA). GFA is a non-profit organisation that is accelerating the transition to a net positive fashion industry, under the patronage of HRH The Crown Princess of Denmark. Global Fashion Summit: Copenhagen Edition 2023 will take place on 27-28 June in Copenhagen, Denmark.

The theme of Global Fashion Summit: Copenhagen Edition 2023 is ‘Ambition to Action’. Under this premise, the Summit will present content experiences focused on tangible impact.

The theme will underly all elements of the Summit and Main Stage speakers will showcase inspiring thought leadership for accelerated change by exploring a matrix of interconnected topics. The 2023 Copenhagen Edition will build on more than a decade’s worth of Summit guidance and outcomes by dedicating even more focus towards action-oriented workshops and case studies. Through these formats, the forum will demonstrate tangible learnings and concrete recommendations that can help drive implementation.
 
The forum will also host strategic roundtable meetings with the aim to mobilise industry leaders to build alliances with solution providers, policy makers, investors and other industry stakeholders and implement immediate solutions. Such alliances can set in motion progress towards a net positive industry. With upcoming policy expected to influence the fashion industry even further this year, the Summit will shed light on the ongoing pieces of legislation currently under discussion both within the EU and worldwide.

This year’s Global Fashion Summit: Copenhagen Edition is supported by Principal Sponsor, Maersk. A globally renowned leader in logistics that aims to deliver a more connected, agile and sustainable future for global logistics. Maersk will support the Summit's agenda to accelerate industry transformation by highlighting how logistics can help the fashion and lifestyle industry in reaching their sustainability goals.

Additionally, the Innovation Forum will present a curated exhibition of other leading sustainable solutions. Summit attendees can meet with exhibitors covering the entire value chain – from innovative materials to end-of-use solutions. Innovation Forum Matchmaking will enable small and large fashion businesses to advance their sustainability journey, by providing the unique opportunity to be matched with relevant solution providers. 

10.02.2023

adidas: Top- and bottom-line outlook for 2023

adidas published its financial guidance for 2023. While the company continues to review future options for the utilization of its Yeezy inventory, this guidance already accounts for the significant adverse impact from not selling the existing stock. This would lower revenues by around € 1.2 billion and operating profit by around € 500 million this year. Against this background, adidas expects currency-neutral sales to decline at a high-single-digit rate in 2023. The company’s underlying operating profit is projected to be around the break-even level.

Should the company irrevocably decide not to repurpose any of the existing Yeezy product going forward, this would result in the write-off of the existing Yeezy inventory and would lower the company’s operating profit by an additional € 500 million this year. In addition, adidas expects one-off costs of up to € 200 million in 2023. These costs are part of a strategic review the company is currently conducting aimed at reigniting profitable growth as of 2024.

If all these effects were to materialize, the company would expect to report an operating loss of € 700 million in 2023.

adidas published its financial guidance for 2023. While the company continues to review future options for the utilization of its Yeezy inventory, this guidance already accounts for the significant adverse impact from not selling the existing stock. This would lower revenues by around € 1.2 billion and operating profit by around € 500 million this year. Against this background, adidas expects currency-neutral sales to decline at a high-single-digit rate in 2023. The company’s underlying operating profit is projected to be around the break-even level.

Should the company irrevocably decide not to repurpose any of the existing Yeezy product going forward, this would result in the write-off of the existing Yeezy inventory and would lower the company’s operating profit by an additional € 500 million this year. In addition, adidas expects one-off costs of up to € 200 million in 2023. These costs are part of a strategic review the company is currently conducting aimed at reigniting profitable growth as of 2024.

If all these effects were to materialize, the company would expect to report an operating loss of € 700 million in 2023.

In 2022, based on preliminary unaudited numbers, adidas revenues increased 1% in currencyneutral terms. In reported terms, sales were up 6% to € 22,511 million during the 12-months period (2021: € 21,234 million). The company’s gross margin reached a level of 47.3% (2021: 50.7%) in 2022. adidas generated an operating profit of € 669 million last year (2021: € 1,986 million), reflecting an operating margin of 3.0% (2021: 9.4%). Net income from continuing operations was € 254 million in 2022 (2021: € 1,492 million).

Source:

adidas AG

(c) MUNICH FABRIC START
13.01.2023

MUNICH FABRIC START announces programme for upcoming event

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

The Munich Fabric Start Exhibitions GmbH announces the programme for the upcoming editions of MUNICH FABRIC START (24 to 26 January 2023) and BLUEZONE & KEYHOUSE (24 and 25 January 2023).
From 24 to 26 January 2023, visitors can expect a range of the latest trends, fabric, accessories and denim highlights from around 900 international exhibitors, an event programme with expert panels, keynotes and trend lectures, as well as numerous networking opportunities.

Economic Environment
Conflicts, inflation, recession, energy crisis, massive inequality, climate change - how companies can position themselves securely in a volatile market environment - this is deciphered by trend analyst David Shah in his key note "Self-Empowerment" and numerous industry experts, futurologists and leading fashion editors in the lecture series "The Status Quo of Fashion" by strategy and communication consultants Alex Vogt and Jana Kern.

Next to David Shah (View-Publications), the panel will include Siems Luckwaldt (CAPITAL and BUSINESS PUNK, RTL Germany), Shamin Vogel (WeAr Global Magazine), Ben Hanson (The Interline), Maria Cristina Pavarini (The SPIN OFF) and Carl Tillessen (DMI)

Digital Era
From digital colour apps, digital twins and virtual models to 3D simulation and virtual dressing rooms - the world of digital fashion will not only be discussed in numerous lectures in Munich, but also brought to life in the new Assyst Experience. Whether it's Carola Seybold, Head of Global Key Accounts at Pantone, Jan Hilger from Roland Berger, Arndt Johannes from Verce, Dr. Stefan Hauswiesner, CEO of Reactive Reality or the experts of the panel "Textilfabrik X.0 - New Marketing Buzz Words or One Step Ahead": everyone will be looking at virtual fashion from a different angle and providing insights into the latest state of the art. In her trend presentation "The weird & wonderful world of fashion cores" at BLUEZONE, Angela Velasquez (Rivet) sheds light on how viral TikTok trends are reshaping denim merchandising.

Sustainable Future
Digitisation and sustainability - the third major theme of the event programme - could not be more closely intertwined. Lisa Lang, Director of Policy & EU Affairs Orchestrator of EIT Climate KIC in an interview with Muchaneta ten Napel (Shape Innovate) kicks things off about the importance of a green transformation for the industry. Other topics in focus: Liv Simpliciano from Fashion Revolution gives an overview of where the world's biggest fashion brands and retailers stand in terms of transparency. Tricia Carey from Renewcell, David Shah (View-Publications), Lien van der Schueren and Guy Buyle (CISUTAC & HEREWEAR), Mateusz Wielopolski (Circulix) and Mario Malzacher (Circular.Fashion) critically discuss whether the circular economy is really the solution for everything or just a placebo. Circular ecosystems are also presented by Franziska von Becker from Hachmeister & Partner.

The race of the new sustainable materials of the future will be opened by Kirsi Terho from Infinited Fiber, Kuben Edwards from Onezero8, Marianne Uddman from Trustrace and Simon Angel, Sustainable Innovations Curator of MUNICH FABRIC START in a panel discussion with Muchaneta ten Napel (Shape Innovate). New products for a sustainable future in the denim industry will be discussed at BLUEZONE.
Another highlight: In cooperation with the Transformers Foundation, an expert panel will also be held at BLUEZONE on both days of the trade show.

Trends Spring.Summer 2024
Gerd Müller-Thomkins, Carl Tillessen and Niels Holger Wien from the Deutsches Mode Institut (DMI) see a "vibe shift" - a turning point. They will analyse what this means for fashion in their trend presentation on Wednesday. The Women's Fashion Trends SS 24 with the must haves of the season will be analysed by Karin Schmitz from the Trend Forecast Institute Peclers Paris - from the glamorous appearance in everyday life, to the play with gender identity, to simplicity combined with functionality and mobility.

Source:

MUNICH FABRIC START / KERN. Consulting

(c) Avgol by Indorama Ventures Limited
30.12.2022

Avgol® wins Procter & Gamble Supplier Excellence Award

Avgol®, an Indorama Ventures Limited company, has been honoured with the Supplier Excellence Award by leading global brand Procter & Gamble.

The award was in recognition of Avgol, a leader in the manufacture of high-performance nonwoven fabric solutions, ‘being a notable and valuable supplier over the last fiscal year’ to the P&G Baby Care Business Unit.

Avgol CEO Tommi Bjornman said receiving the honour from P&G for the first time is a source of great pride for the company. “The assessment process for the award focuses on us as the supplier showing outstanding contributions across a range of key categories,” he said. “I am delighted and proud that the Avgol team was unanimously identified as being strongest in terms of our collaboration with the customer, as well as in our continuous improvement efforts across all regions of P&G’s global Baby Care program.

“It was heartening that, in making the award, P&G further noted that Avgol’s efforts have significantly assisted in their own commercial growth during a challenging period for the Hygiene market,” he said.

Avgol®, an Indorama Ventures Limited company, has been honoured with the Supplier Excellence Award by leading global brand Procter & Gamble.

The award was in recognition of Avgol, a leader in the manufacture of high-performance nonwoven fabric solutions, ‘being a notable and valuable supplier over the last fiscal year’ to the P&G Baby Care Business Unit.

Avgol CEO Tommi Bjornman said receiving the honour from P&G for the first time is a source of great pride for the company. “The assessment process for the award focuses on us as the supplier showing outstanding contributions across a range of key categories,” he said. “I am delighted and proud that the Avgol team was unanimously identified as being strongest in terms of our collaboration with the customer, as well as in our continuous improvement efforts across all regions of P&G’s global Baby Care program.

“It was heartening that, in making the award, P&G further noted that Avgol’s efforts have significantly assisted in their own commercial growth during a challenging period for the Hygiene market,” he said.

In 2018, Indorama Ventures Limited (IVL), a leading petrochemicals producer and global integrated leader in PET and fibres, acquired majority ownership of Avgol, resulting in a focused and faster growth of Avgol Nonwovens.

“With the combined financial, technical, commercial strength and expertise of Avgol and IVL, Avgol has been working hard to develop innovative products, putting sustainability front and centre in our plans for the future and ensuring we deliver the very best product and service to our customers around the world,” said Tommi Bjornman.

 

Source:

Avgol by Indorama Ventures Limited / PHD Marketing Ltd

(c) C.L.A.S.S.
The Modern Artisans for 2022
28.12.2022

C.L.A.S.S.: YOOX NET-A-PORTER and The Prince’s Foundation programme for students

The second edition of The Modern Artisan initiative has been supported by C.L.A.S.S. with its strategic sourcing, mentoring and presence during the official launch happened at the beginning of November at the Dumfries House, part of The Prince's Foundation. Two days to introduce a capsule that reflects the initiative’s commitment to advance sustainability in luxury fashion, preserve heritage textile skills and creates a new culture where respect, beauty and innovation are blended together. They also demonstrate the shared ambition of YOOX NET-A-PORTER and The Prince’s Foundation to preserve the planet for future generations. The Modern Artisan aims to position artisanship as a viable and attractive career path for upcoming generations, equipping them with the skills to help shape a more circular industry.

The 10-month paid programme supports eight British and Italian graduates through the end-to-end process of designing, handcrafting, and bringing a more sustainable luxury collection to a global market. During the programme, they were given the opportunity to showcase their work to His Majesty, then The Prince of Wales, at Dumfries House.

The second edition of The Modern Artisan initiative has been supported by C.L.A.S.S. with its strategic sourcing, mentoring and presence during the official launch happened at the beginning of November at the Dumfries House, part of The Prince's Foundation. Two days to introduce a capsule that reflects the initiative’s commitment to advance sustainability in luxury fashion, preserve heritage textile skills and creates a new culture where respect, beauty and innovation are blended together. They also demonstrate the shared ambition of YOOX NET-A-PORTER and The Prince’s Foundation to preserve the planet for future generations. The Modern Artisan aims to position artisanship as a viable and attractive career path for upcoming generations, equipping them with the skills to help shape a more circular industry.

The 10-month paid programme supports eight British and Italian graduates through the end-to-end process of designing, handcrafting, and bringing a more sustainable luxury collection to a global market. During the programme, they were given the opportunity to showcase their work to His Majesty, then The Prince of Wales, at Dumfries House.

The 13-piece capsule marks the culmination of the second edition of The Modern Artisan, YOOX NET-A-PORTER’s and The Prince’s Foundation’s pioneering flagship training programme, which commenced in 2019. Building on the success of 2020’s first collection launch, this year’s YOOX NET-A-PORTER for The Prince’s Foundation capsule achieves a number of new milestones in YOOX NET-A-PORTER’s Infinity sustainability journey. It is the first collection to align 100% with the Infinity Product Guide, its sustainability and circularity design guidelines, and its first ever carbon neutral collection.

The design is inspired by Highgrove Gardens, run by The Prince's Foundation and renowned for sustainable and organic approaches to agriculture and horticulture. The Artisans were supported by industry experts from YOOX NET-A-PORTER, The Prince’s Foundation, and several mentoring designer brands, including Gabriela Hearst, Nanushka and Stella Jean among others.

Photo: Messe Düsseldorf, Constanze Tillmann
21.12.2022

WearRAcon Europe Conference to be held at A+A 2023

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Under the motto “People Matter” A+A 2023, a Trade Fair for Safety, Security and Health at Work, will revolve around the most important trends of our time: sustainability and digitalisation. Here, exoskeletons also play a prominent role as tomorrow’s ergonomic tools. An important conference in this field is WearRAcon Europe which will be held at A+A from 25 – 26 October 2023 for the first time.

The Conference will be organised by the Fraunhofer Institute IPA in cooperation with the Stuttgart University and the Wearable Robotics Association (WearRA). The 38th A+A Congress, which is held by Bundesarbeitsgemeinschaft für Sicherheit und Gesundheit bei der Arbeit (German Federal Association for Occupational Safety and Health - Basi) will be closely dovetailed thematically and in terms of content with it.

Being able to walk again despite a serious injury, handle heavy parts without outside help or simply do overhead work comfortably and for extended periods of time - the advantages of exoskeletons have already convinced numerous industries. Exoskeletons and wearables are now already being used successfully in industry and commerce, and major machine builders and automakers as well as the medical sector are continuing to experiment with man-machine connections. Currently, the global market volume for exoskeletons is valued by leading analysts at over US$20 billion by 2030.1

The WearRAcon Europe Conference 2023 will provide new insights into the promising world of exoskeleton systems from different perspectives and, in conjunction with the A+A Congress, set future-oriented impulses. Lectures by renowned exoskeleton pioneers combined with testimonials presented by users from a variety of industries and keynotes by experts will round off the programme. And, like at the previous A+A, a Self-Experience Space will again be set up so that the exoskeleton systems of various manufacturers can be tested in realistic work scenarios.

In parallel with the Self-Experience Space, the large live study Exoworkathlon will also take place again. Trainees from various mechatronic training courses have to complete a concourse and perform holding, lifting and assembling tasks, which have been specially developed with the industry. Data is prospectively collected with different measuring sensors to measure the effects of exoskeletons. In the Exoworkathlon, the IPA focuses especially on prevention for young employees in order to raise awareness of the issue and counteract ailments at an early stage.

1 (Interview Trans.INFO mit Armin G. Schmidt, CEO von German Bionic (01/2021).

Source:

Messe Düsseldorf GmbH

(c) FET
Business Secretary Grant Shapps discusses FET’s wet spinning system with Mark Smith, FET R&D Manager
16.12.2022

FET extrusion system features in UK Business Secretary’s visit

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

The UK’s new Business Secretary, Grant Shapps has visited the Henry Royce Institute’ hub in Manchester to seal the second phase of R&D investment in the institute of £95 million. Fibre Extrusion Technology Limited (FET) of Leeds, England had previously installed its FET-200LAB wet spinning system at the University of Manchester site and this proved to be a focus for the Business Secretary’s interest, as he discussed the project with FET’s Research and Development Manager, Mark Smith.

This wet spinning technology enables fibres to be derived from sustainable wood pulp to produce high quality apparel and trials are now underway to perfect this process. FET is a world leading supplier of laboratory and pilot melt spinning systems, having successfully processed more than 35 different polymer types in multifilament, monofilament and nonwoven formats.

During his visit, Shapps spoke of the investment programme as a means of reinforcing the UK’s standing as a leader in advanced materials research, development and innovation.

“R&D investment is a critical way to turbocharge Britain’s growth. Growing an economy fit for the future means harnessing the full potential of advanced materials, making science fiction a reality by supporting projects from regenerative medicine to robots developing new recycling capabilities, right across the country. Today’s £95 million investment will do just that, bringing together the brightest minds across our businesses and institutions to help future-proof sectors from healthcare to nuclear energy.”

The Henry Royce Institute was established in 2015 with an initial £235 million government investment through the Engineering and Physical Sciences Research Council and the latest £95 million sum represents the second phase of the investment.

Opportunities being investigated by Royce include lightweight materials and structures, biomaterials and materials designed for reuse, recycling and remanufacture. Advanced materials are critical to the UK future in various industries, such as health, transport, energy, electronics and utilities.