From the Sector

Reset
23 results
conference on flame retardancy for composites Photo AVK Industrievereinigung Verstärkte Kunststoffe e. V.
26.11.2024

Successful conference on flame retardancy for composites in Berlin

On November 20th/21st, 2024, the second conference on flame retardancy for composite applications took place in Berlin, organised by the AVK - Industrievereinigung Verstärkte Kunststoffe e.V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

60 participants attended the international event, which this time focused on the requirements in the construction/infrastructure sector in addition to the transport sector.

In 14 presentations, 18 speakers provided information on new developments, requirements and innovations from the fields of standardisation, material development, construction/infrastructure, public transport, automotive and research & science.

Prof. Schartel from the Bundesanstalt für Materialforschung und –prüfung began with an introduction to the principle and concept of flame-retardant composites. In the following thematic blocks, the companies CTS Composite Technologie Systeme GmbH and Nabaltec AG provided information on new possibilities and developments at the material level of non-combustible fibre-reinforced plastics (FRP).

On November 20th/21st, 2024, the second conference on flame retardancy for composite applications took place in Berlin, organised by the AVK - Industrievereinigung Verstärkte Kunststoffe e.V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

60 participants attended the international event, which this time focused on the requirements in the construction/infrastructure sector in addition to the transport sector.

In 14 presentations, 18 speakers provided information on new developments, requirements and innovations from the fields of standardisation, material development, construction/infrastructure, public transport, automotive and research & science.

Prof. Schartel from the Bundesanstalt für Materialforschung und –prüfung began with an introduction to the principle and concept of flame-retardant composites. In the following thematic blocks, the companies CTS Composite Technologie Systeme GmbH and Nabaltec AG provided information on new possibilities and developments at the material level of non-combustible fibre-reinforced plastics (FRP).

The implementation of fire protection requirements in the operation of rail vehicles or for load-bearing FRP components played a major role in the area of construction/infrastructure, as did the sustainability of these building materials, which Frank Lüders from DB Systemtechnik GmbH and Kabelan Thavayogarajah from Fraunhofer LBF reported on in their presentations.

The well-known topic of e-mobility took its place in the automotive sector, where Dr. Christian Battenberg from Clariant Plastics &Coatings (Deutschland) GmbH spoke about flame retardants for applications in this field.

The successful event was rounded off by the Research and Science block with two presentations by Fraunhofer LBF and Deutsches Textilforschungszentrum Nord-
West gGmbH & Centre for Nanointegration Duisburg-Essen.

Over the course of one and a half days, the conference provided an important platform for experts from industry and science to discuss the latest developments and challenges in the field of flame retardancy for composites. The high level of participation highlighted the relevance of the topic and underpinned the decision to organise a third round of the conference in 2026.

Source:

AVK  Industrievereinigung Verstärkte Kunststoffe e. V.

26.11.2024

Autoneum expands its presence in the Asian growth markets

In line with the new Level Up corporate strategy, which focuses on innovation and a future-fit product portfolio among other things, Autoneum has further expanded its research and development activities in 2024 with a particular focus on New Mobility. In addition to establishing a specialized team to accelerate the development and market readiness of novel products and technologies for electric vehicles, the Company has complemented its global innovation network with a new Research & Technology (R&T) Center in Shanghai, China.

Innovation is and always has been an integral part of Autoneum’s corporate strategy and thus a key factor for business success. The Company’s innovation activities are also an important aspect of its vision: to be the global leader for innovative and sustainable solutions bringing comfort to every vehicle. Against the backdrop of the rapidly advancing electrification of mobility and Autoneum’s strategic focus on further expanding its presence in the Asian growth markets, the expansion activities of the company-wide innovation network this year concentrated on two key areas in particular: New Mobility and presence in China.

In line with the new Level Up corporate strategy, which focuses on innovation and a future-fit product portfolio among other things, Autoneum has further expanded its research and development activities in 2024 with a particular focus on New Mobility. In addition to establishing a specialized team to accelerate the development and market readiness of novel products and technologies for electric vehicles, the Company has complemented its global innovation network with a new Research & Technology (R&T) Center in Shanghai, China.

Innovation is and always has been an integral part of Autoneum’s corporate strategy and thus a key factor for business success. The Company’s innovation activities are also an important aspect of its vision: to be the global leader for innovative and sustainable solutions bringing comfort to every vehicle. Against the backdrop of the rapidly advancing electrification of mobility and Autoneum’s strategic focus on further expanding its presence in the Asian growth markets, the expansion activities of the company-wide innovation network this year concentrated on two key areas in particular: New Mobility and presence in China.

Responding to the increasing demand for new components for electric vehicles, Autoneum has formed a specialized team dedicated exclusively to New Mobility to further strengthen its position in this growing market segment. The New Mobility team was established in fall 2023 and has been completed over the past twelve months with members from different departments. It unites a broad set of skills from various fields of expertise such as product innovation, product development and industrialization, sales and business development. The team places a particular focus on accelerating the development and time to market of new products and technologies specifically for the fast-evolving battery systems and architectures of electric vehicles. It also acts as a catalyst for innovation pro-jects and strategic partnerships. The New Mobility experts work in close collaboration with the various departments across the organization and are based at Autoneum’s Swiss headquarters in Win-terthur, at the German locations in Gundernhausen and Munich and in Shanghai, China.

Shanghai is also the location of Autoneum’s third R&T Center worldwide, which was opened in China this summer to enhance the Company’s competitiveness in Asia and cater to the development and innovation needs in this key strategic market. The new center aims to intensify and accelerate the development and production of innovative components and materials, especially regarding e-mobility. The establishment of an R&T team in China allows Autoneum to develop products in a timely manner to respond to the dynamic market conditions and the rapidly evolving requirements of Chinese vehicle manufactures. In terms of material development, the center will support the wider organization in the further development of sustainable materials, especially polyester. In addition, it will promote the introduction of Autoneum’s environmentally friendly products such as the Company’s monomaterial carpet systems featuring Autoneum’s innovative and latex-free alternative backcoating (ABC) process to the Chinese market. Moreover, the R&T Center in Shanghai will also serve as a valuable point of contact with the 14 production facilities of the Jiangsu Huanyu Group, whose acquisition of a majority stake of 70 percent by Autoneum was recently announced and is expected to be closed in March 2025 (see media release of November 19, 2024). While the plants in China will benefit from the local R&T team’s expertise in the company’s technologies, the existing broad customer base of Jiangsu Huanyu Group will support Autoneum in better understanding and serving the innovation needs of Chinese vehicle manufacturers.

The new R&T Center in Shanghai complements the primary R&T Center in Winterthur, Switzerland, which supports the global network with its expertise and a vast array of services in the areas of pre-development as well as acoustic and thermal benchmarking, simulation and testing, and the center in Bocholt, Germany. The latter was integrated into Autoneum’s innovation network following the acquisition of Borgers Automotive last year and has since established itself as the Company’s competence center for trunk and trim components. Including the new center in China, a total of approximately eighty R&T employees – including engineers, chemists, physicists and product designers – are continuously working on new ideas aimed at the next technological breakthrough in acoustic and thermal management and shielding technologies.

Source:

Autoneum Management AG

27.08.2024

FiltXPO™ 2025: Call for Conference Presentations

INDA, the Association of the Nonwoven Fabrics Industry, in partnership with AFS, the American Filtration and Separations Society, announces the call for presentations for the Advances in Filtration Conference at FiltXPO™ 2025, scheduled for April 29-May 1, 2025, in Miami Beach, Florida. Filtration professionals are invited to showcase their latest research and technological advancements during this highly anticipated two-day event.

Abstract submissions are now open and can be submitted through the AFS website.

Conference Highlights:

INDA, the Association of the Nonwoven Fabrics Industry, in partnership with AFS, the American Filtration and Separations Society, announces the call for presentations for the Advances in Filtration Conference at FiltXPO™ 2025, scheduled for April 29-May 1, 2025, in Miami Beach, Florida. Filtration professionals are invited to showcase their latest research and technological advancements during this highly anticipated two-day event.

Abstract submissions are now open and can be submitted through the AFS website.

Conference Highlights:

  • Key Topics:
  • Nonwovens and Filtration for Healthy Buildings
  • Nonwovens and Filtration for Data Centers
  • Nonwovens and Filtration for e-Mobility
  • Sustainability and Circularity in Filtration
  • Innovations Meeting Current Challenges of Filtration
  • Presentation Formats:
    The conference will feature both oral presentations and technical posters. The Planning Committee will determine the appropriate format for each submission, with both formats considered equally valuable.
  • New Addition:
    This year, the conference introduces technical posters, offering a platform for subject matter experts and research institutes to present their latest filtration innovations.

Abstract submissions are due by October 15, 2024. All submissions will undergo a peer-review process conducted by the Conference Planning Committee.

How to Participate: To submit abstracts and for more information, please visit: https://www.afssociety.org/filtxpo-2025.

 

Source:

INDA

09.08.2024

AVK: Second conference on flame retardancy

The second conference on flame retardancy will now take place in Berlin from 20-21 November 2024, organized by the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

In addition to the transport sector, the requirements in the construction/infrastructure sector will also be considered. Components made from fiber-reinforced plastics/composites that are manufactured for these sectors often have to have specific flame-retardant properties. Over the course of one and a half days, 14 presentations will provide information on new developments, requirements and innovations from the fields of standardization, material development, construction/infrastructure, public transport, automotive and research & science.

The lecture titles range from requirements and challenges for low-voltage products to the possibilities offered by new types of ceramifying fillers and flame retardants for e-mobility applications.

The event will be held in English.

The second conference on flame retardancy will now take place in Berlin from 20-21 November 2024, organized by the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

In addition to the transport sector, the requirements in the construction/infrastructure sector will also be considered. Components made from fiber-reinforced plastics/composites that are manufactured for these sectors often have to have specific flame-retardant properties. Over the course of one and a half days, 14 presentations will provide information on new developments, requirements and innovations from the fields of standardization, material development, construction/infrastructure, public transport, automotive and research & science.

The lecture titles range from requirements and challenges for low-voltage products to the possibilities offered by new types of ceramifying fillers and flame retardants for e-mobility applications.

The event will be held in English.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

29.05.2024

Cinte Techtextil China taking place in September 2024

With four months until the show opens doors, key exhibitors have already confirmed participation for the Cinte Techtextil China 2024. In conjunction with a positive global outlook, key players are eager to congregate again at the Shanghai New International Expo Centre from 19 – 21 September, to showcase innovations and connect with buyers from various sectors.
 
The fair will closely align with Messe Frankfurt’s ‘Texpertise Econogy’ – the umbrella for the group’s sustainability activities at its more than 50 textile trade shows worldwide. New energy elements, such as battery and hydrogen, will appear at the Innovation Showcase Area, on top of other interactive fringe events which centre around sustainability.

With four months until the show opens doors, key exhibitors have already confirmed participation for the Cinte Techtextil China 2024. In conjunction with a positive global outlook, key players are eager to congregate again at the Shanghai New International Expo Centre from 19 – 21 September, to showcase innovations and connect with buyers from various sectors.
 
The fair will closely align with Messe Frankfurt’s ‘Texpertise Econogy’ – the umbrella for the group’s sustainability activities at its more than 50 textile trade shows worldwide. New energy elements, such as battery and hydrogen, will appear at the Innovation Showcase Area, on top of other interactive fringe events which centre around sustainability.

With environmental protection as one of the top sourcing categories at the previous edition, products with medical, home, protection, and building applications rounded out the top five. By product group, in-demand sourcing categories included nonwovens; technology and accessories; woven fabrics, laid webs, knitted fabrics, braidings; composites; as well as coated textiles and bondtec. The show saw 15,542 visits from 52 countries and regions last year.

Catering to various key players in 2023, the well-known Groz-Beckert East Asia brought their latest innovative needling tools for the nonwovens sector. Speaking at the show, Mr Kabilen Sornum, Vice President Asia Pacific of Marketing & E-Commerce, commented: “While we are focusing on the China market, we have also seen buyers from the Middle East, Europe, Korea, and North Asia. Cinte Techtextil China is a more international fair – we can see that everyone is here, and the quality and innovation of buyers has improved greatly in the past three to four years. E-mobility and sustainability are two very clear trends.”
 
The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

Source:

Messe Frankfurt (HK) Ltd

Robot system (c) STFI
20.03.2024

STFI: Highlights of textile research at Techtextil 2024

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

STFI will be presenting high-end textile products and solutions at Techtextil 2024. The highlights from current research results and innovations provide an insight into the digitalisation of textile production, show applications for 3D printing and smart technical textiles and provide examples of particularly sustainably designed products as well as innovative approaches for protective and medical textiles.

The central highlight of STFI's presence at Techtextil is a robot system that demonstrates the automated processing of a bobbin frame on a small scale. The pick-and-place application demonstrates camera-supported gripping of the bobbins. The robot is part of the STFI's “Textile Factory of the Future” which demonstrates automation solutions for the textile industry in a laboratory environment.

From the field of sustainable products and solutions, a sleeping bag with bio-based and therefore vegan filling material and a natural fibre-based composite element for furniture construction, in which LEDs and capacitive proximity sensors for contactless function control have been applied using embroidery technology, will be on show. Printed heating conductor structures demonstrate current research work for the e-mobility of the future, as the individually controllable seat and interior heating should ultimately reduce weight and save energy compared to conventional heating systems.

While a protective suit for special task forces protects against the dangers of a Molotov cocktail attack, a shin guard and a knee brace with patellar ring illustrate the process combination of 3D printing and UV LED cross-linking. Other highlights from lightweight textile construction include the rib of a vertical rudder of an Airbus A320 and a green snowboard made from recycled carbon fibres.

More information:
STFI Techtextil Smart textiles
Source:

Sächsisches Textilforschungsinstitut e.V. (STFI)

08.03.2024

Autoneum: Two new plants in China and India

  • Autoneum is expanding its production capacities in Asia with two new plants in Changchun in the Chinese province of Jilin and Pune in Western India.

The world's largest automotive market Asia is one of the most important sales regions for vehicle manufacturers and suppliers as well as a pioneer for new forms of e-mobility. Autoneum already supplies both international and local vehicle manufacturers in Asia with multifunctional lightweight components for noise and heat protection, supporting them in their commitment to sustainable mobility. Autoneum is expanding its production capacities in the key automotive hubs of China and India to increase its presence and thus its proximity to customers in these important production centers.

  • Autoneum is expanding its production capacities in Asia with two new plants in Changchun in the Chinese province of Jilin and Pune in Western India.

The world's largest automotive market Asia is one of the most important sales regions for vehicle manufacturers and suppliers as well as a pioneer for new forms of e-mobility. Autoneum already supplies both international and local vehicle manufacturers in Asia with multifunctional lightweight components for noise and heat protection, supporting them in their commitment to sustainable mobility. Autoneum is expanding its production capacities in the key automotive hubs of China and India to increase its presence and thus its proximity to customers in these important production centers.

Autoneum’s new plant in China, which will be operated as a joint venture, will be located in Changchun in the northern Chinese Jilin province, which is one of Asia’s largest car production centers. The proximity to key local and international vehicle manufacturers makes Changchun a strategically important and attractive location for Autoneum. The plant will help to increase market share with European, Japanese and Chinese car manufacturers with products for light vehicles and also support the expansion of the Company’s business with components for commercial vehicles in this region. The project is supported by the local authorities in China. From the end of 2024, the plant will ramp up production with first samples for already awarded business for inner dashes, interior floor insulators and other NVH (noise, vibration, harshness) components for cars of all drive types.

Autoneum is furthermore expanding its local presence in Western India with a fully owned production facility in Pune in the state of Maharashtra. The Company already operates two locations in India: one in Behror near New Delhi in the north and a joint venture plant in Chennai in the south. Thanks to the new Pune plant, Autoneum will now be present in the north, west and south of the country and gain access to the third of four major automobile production centers in India. Orders have already been received and the plant in Pune will start manufacturing carpet systems, interior trim, wheelhouse outer liners, e-motor covers and other noise protection components as of the second quarter of 2024. From the 7 500 square meter building, Autoneum will supply international as well as local car manufacturers with a particular focus on Indian and Korean vehicle manufacturers.

Source:

Autoneum Management AG

STFI: Lightweight construction innovations at JEC World in Paris (c) silbaerg GmbH and STFI (see information on image)
23.02.2024

STFI: Lightweight construction innovations at JEC World in Paris

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

VliesComp
The aim of the industrial partners Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) and STFI united in the VliesComp project is to bring recycled materials back onto the market in various lightweight construction solutions. The application fields "Innovative e-machine concepts for the energy transition" and "Innovative e-machine concepts for e-mobility" were considered as examples. On display at JEC World in Paris will be a lightweight end shield for electric motors made from hybrid nonwovens - a mixture of thermoplastic fibre components and recycled reinforcing fibres - as well as nonwovens with 100% recycled reinforcing fibres. The end shield was ultimately manufactured with a 100% recycled fibre content. The tests showed that, compared to the variant made from primary carbon fibres using the RTM process, a 14% reduction in CO2 equivalent is possible with the same performance. The calculation for the use of the prepreg process using a bio-resin system shows a potential for reducing the CO2 equivalent by almost 70 %.

Bast fibre reinforcement
To increase stability in the plant stem, bast fibres form in the bark area, which support the stem but, in contrast to the rigid wood, are very flexible and allow slender, tall plants to move in the wind without breaking.A new process extracts the bast bark from hemp by peeling.The resulting characteristic values, such as tensile modulus of elasticity, breaking strength and elongation, are very promising in comparison with the continuous rovings made of flax available on the market.The material could be used as reinforcement in lightweight construction.At JEC World, STFI will be exhibiting reinforcing bars that have been processed into a knitted fabric using a pultrusion process based on bio-based reinforcing fibres made from hemp bast for mineral matrices.

Source:

Sächsische Textilforschungsinstitut e.V. (STFI)

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
14.11.2023

Successful SMCCreate 2023 Design Conference in Prague

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

As an introduction, speakers - including CTC/Airbus and Teijin - presented different possible applications for SMC and BMC components, including aircraft interiors, bicycle boxes, and applications in e-mobility. The topic of sustainability was broadly covered, highlighting recycling solutions and experiences (Siemens, IDI, OC, AOC), the use of renewable raw materials, as well new LCA models developed by the SMC BMC Alliance (LCS),

Specifically for designers, the use of the SMC flow and curing modelling was presented (ESI, OC), SMC positioning vs. aluminium (Spartners). The second day concluded with contributions on process optimization options for component production, including speeches by Dieffenbacher, Netzsch and EBG.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

(c) AZL. Comparison of battery casing in modular design and “cell-to-pack” design
Comparison of battery casing in modular design and “cell-to-pack” design
02.09.2022

AZL: Plastic-based multi-material solutions for cell-to-pack battery enclosures

The future of e-mobility will be determined in particular by safe battery enclosures. As batteries for electric vehicles become more performant, higher volumetric energy density plays a crucial role. If more energy is to be stored in less installation space, new material and design solutions are required. The development of suitable enclosures made of safe and highly robust lightweight materials is also required. This is a case for the Aachen Centre for Integrative Lightweight Production (AZL). A project on cell-to-pack battery enclosures for battery-electric vehicles, which has been eagerly awaited in the industry, will start in October this year there.

The future of e-mobility will be determined in particular by safe battery enclosures. As batteries for electric vehicles become more performant, higher volumetric energy density plays a crucial role. If more energy is to be stored in less installation space, new material and design solutions are required. The development of suitable enclosures made of safe and highly robust lightweight materials is also required. This is a case for the Aachen Centre for Integrative Lightweight Production (AZL). A project on cell-to-pack battery enclosures for battery-electric vehicles, which has been eagerly awaited in the industry, will start in October this year there.

The design of battery housings is crucial for safety, capacity, performance, and economics. The Cell-to-Pack project, which is starting now, will focus on developing concepts for structural components and for producing them based on a variety of materials and design approaches. The concepts will be compared in terms of performance, weight and production costs, creating new know-how for OEMs, producers and their suppliers throughout the battery vehicle value chain. Companies are now invited to participate in this new cross-industry project to develop battery enclosure concepts for the promising and trend-setting cell-to-pack technology.

The basis for the project is the lightweight engineering expertise of the AZL experts, which they have already demonstrated in previous projects for multi-material solutions for module-based battery housings. Together with 46 industry partners, including Audi, Asahi Kasei, Covestro, DSM, EconCore, Faurecia, Hutchinson, Johns Manville, Magna, Marelli and Teijin, 20 different multi-material concepts were optimized in terms of weight and cost and compared with a reference component made from aluminum. All production steps were modelled in detail to obtain reliable cost estimates for each variant. Result: depending on the concept, 20% weight or 36% cost savings potential could be identified by using multi-material composites compared to the established aluminum reference.

It is expected that the design concept of battery enclosures will develop in the direction of a more efficient layout. In this case, the cells are no longer combined in modules in additional production steps, but are integrated directly into the battery housing. The elimination of battery modules and the improved, weight-saving use of space will allow for higher packing density, reduced overall height and cost saving. In addition, various levels of structural integration of the battery housing into the body structure are expected. These new designs bring specific challenges, including ensuring protection of the battery cells from external damage and fire protection. In addition, different recyclability and repair requirements may significantly impact future designs. How the different material and structural options for future generations of battery enclosures for the cell-to-pack technology might look like and how they compare in terms of cost and environmental impact will be investigated in the new AZL project. In addition to the material and production concepts from the concept study for module-based battery enclosures, results from a currently ongoing benchmarking of different materials for the impact protection plate and a new method for determining mechanical properties during a fire test will also be incorporated.

The project will start on October 27, 2022 with a kick-off meeting of the consortium, interested companies can still apply for participation until then.

27.07.2022

Autoneum: Half Year Results 2022

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Lower volumes due to geopolitical developments and the sharp rise in inflation impacted the result in the first half of 2022. In a slightly declining market, Autoneum increased revenue in local currencies by 0.5%. At CHF 888.7 million, revenue in Swiss francs reached the previous year's level. Despite the challenging environment, Autoneum achieved a positive operating result of CHF 6.4 million (EBIT margin: 0.7%). The net result decreased to CHF –12.8 million. On the other hand, Autoneum was able to generate a solid free cash flow of CHF 45.2 million. A high demand for sustainable products for electric vehicles confirms that Autoneum is well positioned for this growing market of the future.

Current geopolitical developments substantially affected business performance in the first half of 2022. They are accompanied by accelerating inflation and significant price increases in the commodities markets, which the war in Ukraine has further exacerbated. These developments are also delaying market recovery in the automotive industry. Autoneum does everything it can to minimize the impact on the Group. Despite the present challenges, we will continue to implement our strategy, focusing on innovative and sustainable technologies for growing markets of the future.

  • Revenue development influenced by the war in Ukraine and supply chain bottlenecks*
  • Low production volumes and high inflation impact profitability*
  • Solid free cash flow enables further reduction in net debt*
  • Business Groups*
  • Well positioned for e-mobility and sustainability*
  • Expanding the product portfolio for electric vehicles*
  • Autoneum joins the Science Based Targets initiative*

Outlook
According to global market forecasts1, automobile production will pick up again in the second half of the year with growth of 8.8% compared with the first half-year 2022. For full-year 2022, global automobile production is projected to reach 80.8 million vehicles, which is equivalent to a 4.7% increase on 2021. Based on the market forecasts, Autoneum expects to improve the operating result for the second half of the year. This will be supported by ongoing customer negotiations with a view to fair sharing of costs, the accompanying contribution of vehicle manufacturers to shouldering the sharp increases in material, energy and transport costs and the foreseeable normalization of production after the easing of lockdown measures in China. On this basis, Autoneum expects substantially enhanced results for full-year 2022, as well as an improvement in the EBIT margin to 2.0% to 3.0%. Free cash flow is expected to be in the mid to high double-digit million range for the full year 2022.

*For more information see attached document

1Source: IHS “Light Vehicle Production Forecasts” – July 15, 2022

More information:
Autoneum supply chain acoustic
Source:

Autoneum Management AG

15.06.2022

Autoneum updates its outlook for 2022 as a result of the Ukraine war

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

Due to the impact of the war in Ukraine on the automotive industry and vehicle production as well as of rising inflation, Autoneum is adjusting its corporate outlook for the 2022 financial year. The market recovery will be delayed by current developments.

Since the outbreak of war in Ukraine, new bottlenecks in global supply and logistics chains have been impacting vehicle manufacturer production volumes and thus slowing the revenue and earnings development of the automotive supply industry, especially in Europe. Current developments are accompanied by accelerated inflation and significant price increases on the commodities markets, which have been further exacerbated by the war. These are felt at Autoneum through rising material, energy and transport costs. With regard to the rising costs, automotive manufacturers and suppliers are now required to ensure a fair burden sharing as partners.

In addition, renewed coronavirus-related lockdowns in China are delaying growth in Asia. According to the revised market forecasts1), global automobile production is expected to reach 80.4 million units in 2022, which represents an increase of 4.1% compared to 2021. Growth will thus be significantly lower than was still expected in mid-February.

Autoneum will do its utmost to minimize the impact on the Group. Despite the present challenges, the strategy will continue to be consistently implemented with a focus on innovative and sustainable technologies for growing markets of the future.

Based on current developments and knowledge, Autoneum has updated the forecasts that it presented at the Media Conference, which had not yet included the impacts of the war as outlined above. Autoneum continues to expect revenue to develop in line with the market. For the first half of the year, the Company expects an EBIT margin at break-even level. On the basis of the ongoing collaborative discussions with customers to participate in the sharing of the sharply increased energy and material costs, Autoneum anticipates an improvement in the EBIT margin to 2.0 to 3.0% (previously: 4.0 to 5.0%) for the full year 2022. Free cash flow for 2022 is expected to be in the mid to high double-digit million range.

Autoneum is very well positioned for the transformation of the automotive industry towards e-mobility and sustainability. Our product portfolio is suitable for all drive types, whether internal combustion, hybrid or pure electric vehicles. The medium-term forecasts that Autoneum published in November 2021 remain unchanged positive. The timing of the market recovery will be delayed by current events and will also depend on further geopolitical developments.

Source:

Autoneum Management AG

04.11.2021

Autoneum presents medium-term financial targets

Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.

In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.

Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.

In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.

Based on the further expansion of the portfolio with sustainable products and new applications for e-vehicles as well as the increase in market share with existing and new customers, particularly in Asia, the Company expects a profitable revenue growth at market level in the medium term. Based on the expected revenue development, further progress in the turnaround of North America as well as the consistently practiced operational excellence in all business areas, Autoneum targets an EBITDA margin of 13% in the medium term. Accordingly, a solid free cash flow in the amount of 6% of revenue and a further increase in the equity ratio to over 35% are targeted. The Company still intends to pay a dividend to shareholders of at least 30% of the profit attributable to Autoneum shareholders.

More information:
Autoneum Automotive Sustainability
Source:

Autoneum Management AG

(c) Tom Schulze. “IQ Innovationspreis Mitteldeutschland“, overall winner (from left to right) FibreCoat GmbH from Aachen, ITA graduate Dr Robert Brüll, Deutsche Basalt Fiber GmbH from Sangerhausen, Georgi Gogoladze.
28.06.2021

Overall prize of the “IQ Innovationspreis Mitteldeutschland“ for FibreCoat GmbH and DBF Deutsche Basalt Faser GmbH

FibreCoat GmbH from Aachen, Germany, together with DBF Deutsche Basalt GmbH, developed a completely new type of fibre material to shield electromagnetic radiation from digital end devices, medical technology or e-car batteries cheaply and effectively. The joint project was awarded the overall prize of the“ IQ Innovationspreises Mitteldeutschland“ on 24 June in an online event broadcast live from Leipzig.

The prize is endowed with €15,000 and was sponsored by the Halle-Dessau, Leipzig and East Thuringia Chambers of Industry and Commerce.

FibreCoat GmbH from Aachen, Germany, together with DBF Deutsche Basalt GmbH, developed a completely new type of fibre material to shield electromagnetic radiation from digital end devices, medical technology or e-car batteries cheaply and effectively. The joint project was awarded the overall prize of the“ IQ Innovationspreises Mitteldeutschland“ on 24 June in an online event broadcast live from Leipzig.

The prize is endowed with €15,000 and was sponsored by the Halle-Dessau, Leipzig and East Thuringia Chambers of Industry and Commerce.

Electromagnetic radiation from smartphones, hospital diagnostics and electric car batteries must be shielded so that they do not inter-fere with each other. To prevent mutual interference, they have so far been covered with metal fibre fabrics, a very time- and energy-consuming and thus expensive procedure. The new material from Basalt Faser GmbH and FibreCoat GmbH prevents this with a fibre core made of melted, thinly drawn basalt, which is coated with aluminium and bundled into the so-called AluCoat yarn. This yarn remains just as conductive and shielding, but is lighter, stronger, cheaper and more sustainable than previous alternatives. In addition, there are further advantages:

  • The number of process steps required is reduced from ten to one.
  • 1,500 metres of yarn are produced per minute instead of the previous five metres.
  • The energy required is only 10 per cent of the previous amount.

The result is a price that is twenty times lower.

The textile made of AluCoat fibres is versatile and flexible: as wallpaper it can shield 5G radiation in offices or medical rooms or encase batteries and thus ensure the smooth functioning of electric cars. AluCoat is already being used in some companies. A European fibre centre in Sangerhausen is being planned for mass production.

The two innovative companies DBF Deutsche Basalt GmbH and FibreCoat GmbH from East and West combine the two materials basalt and aluminium to protect against electromagnetic radiation. In doing so, they coat basalt with aluminium and, through this novel combination, create an inexpensive, sustainable and quickly produced alter-native for a market worth billions.

FibreCoat GmbH from Aachen is a spin-off of the Institut für Textiltechnik (ITA) of RWTH Aachen University; the managing directors Dr Robert Brüll and Alexander Lüking and Richard Haas have completed their doctorates at the ITA or are in the process of preparing their doctorates. Georgi Gogoladze, Managing Director of Deutsche Basaltfaser GmbH, also studied at RWTH Aachen University. The two managing directors Brüll and Gogoladze know each other from their student days.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

AMAC kooperiert mit ITA (Institut für Textiltechnik der RWTH Aachen und deren ITA GmbH) für die weitere Geschäftsentwicklung im Bereich Composites  © AMAC
fltr: Markus Beckmann, Prof. Thomas Gries, Dr. Michael Effing, Dr. Christoph Greb
19.04.2021

AMAC cooperates with ITA

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

23.11.2020

AMAC cooperates with start-up FibreCoat

Cooperation and business development with AMAC
As of November 1st, 2020, AMAC is pleased to announce its cooperation with company FibreCoat for the market introduction of their products and global business development. FibreCoat is a young, award-winning start-up and spin-off of the RWTH Aachen University in Germany and develops multi-filament coated yarns, fabrics and composites based on glass or basalt fibres.

Dr. Michael Effing, CEO AMAC GmbH: „FibreCoat is a very promising newcomer in the electro-magnetic shielding and composites industry and their innovations are very cost-efficient for new technologies such as e-mobility or telecommunications. I am very pleased to introduce them to relevant key players in the industry and accompany them in their growth strategy.“

Product Launch
FibreCoat develops metal-coated fibres like bi-component multi-filament yarns with basalt core and aluminum coating which can be used for EMI-shielding and heat sinks in battery casings, electric diverters in filters, reinforcement of cast aluminum parts o ras conductive yarns in smart textiles.

Cooperation and business development with AMAC
As of November 1st, 2020, AMAC is pleased to announce its cooperation with company FibreCoat for the market introduction of their products and global business development. FibreCoat is a young, award-winning start-up and spin-off of the RWTH Aachen University in Germany and develops multi-filament coated yarns, fabrics and composites based on glass or basalt fibres.

Dr. Michael Effing, CEO AMAC GmbH: „FibreCoat is a very promising newcomer in the electro-magnetic shielding and composites industry and their innovations are very cost-efficient for new technologies such as e-mobility or telecommunications. I am very pleased to introduce them to relevant key players in the industry and accompany them in their growth strategy.“

Product Launch
FibreCoat develops metal-coated fibres like bi-component multi-filament yarns with basalt core and aluminum coating which can be used for EMI-shielding and heat sinks in battery casings, electric diverters in filters, reinforcement of cast aluminum parts o ras conductive yarns in smart textiles.

FibreCoat launches ALUCOAT™, an aluminum-coated glass or basalt fibre which is suitable as electro-magnetic shielding material in automotive applications such as radar, antennas or for autonomous driving as well as for mobile phones and applications in buildings. Due to its extraordinary thermal conductivity and better heat transfer compared to traditional composite material, it can be used for the manufacturing of automotive battery trays or industrial applications such as fine particulate air filters.

ALUCOAT™ is available as of January 1st 2021 as a yarn, fabric or non-woven with a wide range of possible titers and areal weight. The material will offer an electrical conductivity of 100 Ωm and a working temperature of at least 400 °C. Furthermore, it can be used for the shielding of low to high frequencies with an effectiveness of 80 to 120 dB.

Source:

AMAC GmbH

(c) BMW Group
21.04.2020

SGL Carbon receives contract for battery enclosure from BMW Group

  • New composite e-Mobility application
  • Multi-year substantial contract

After prototypes for a Chinese automotive manufacturer, a major order from a North American automaker, and yet another order for a European sports car manufacturer, SGL Carbon has now been nominated by BMW Group to produce a cover component for battery enclosures in series. This substantial multi-year order will include the production of an innovative glass-fiber-based cover plate for the battery housing for usage in a future plug-in hybrid model of BMW Group.

  • New composite e-Mobility application
  • Multi-year substantial contract

After prototypes for a Chinese automotive manufacturer, a major order from a North American automaker, and yet another order for a European sports car manufacturer, SGL Carbon has now been nominated by BMW Group to produce a cover component for battery enclosures in series. This substantial multi-year order will include the production of an innovative glass-fiber-based cover plate for the battery housing for usage in a future plug-in hybrid model of BMW Group.

Materials made of composites are suited for battery enclosures for different reasons: Besides their light weight, which enhances the electric vehicle’s range, fiber-reinforced plastics offer high stiffness. In addition, they meet high requirements for water and gas tightness and feature excellent fire protection properties. Composite materials can also help to achieve improved structural stiffness of the underbody, e.g. to protect against penetration, as well as an optimized thermal management. Carbon fibers are ideal for especially stressed structures or load-bearing elements, such as the underbody panels and side frames. For components subjected to less stress, such as battery box covers, glass fibers or a fiber mix may suffice.

In addition to the new application for the hybrid model battery enclosure, SGL Carbon will continue producing the usual components made of carbon-fiber-reinforced plastic for the BMW i3 and delivering materials for the Carbon Core body of the BMW 7 series, and has been nominated as the supplier for all carbon materials - fibers, textiles, stacks - for the BMW iNEXT, set to be launched in 2021.

Source:

SGL CARBON SE

Tailor-made large-scale fabrics production at SGL Carbon in Wackersdorf, Germany (c) SGL Carbon
Tailor-made large-scale fabrics production at SGL Carbon in Wackersdorf, Germany
07.02.2020

JEC World 2020: SGL Carbon presents new solutions

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

At this year’s JEC World, the largest trade fair for composites held from March 3-5, 2020 in Paris, SGL Carbon will focus on the topic of serial production for the automotive, aerospace and industrial sectors. The key is customized solutions with individual component designs combined with tailored materials and production processes ready for large scale production. Under the motto “The Solution Provider,” the company will present selective innovative component solutions from all three areas in Hall 6, Booth D25. Furthermore, as an example for industrial applications, SGL Carbon will showcase at the JEC world a crossbeam made of carbon fiber reinforced plastics (CFRP) used in automated Schuler press lines.

  •    Composite battery enclosures for e-mobility
  •    Flexible new leaf spring generation for rear axles
  •    Innovative component designs for passenger airplanes, helicopters and air taxis
  •    Extremely lightweight and stable transfer beam for mechanical engineering

Selective applications with focus on serial production
In the field of automotive applications, SGL Carbon will present at the JEC World composite battery enclosures as a promising new application driven by increasing demand for electric vehicles and the resulting new flexible chassis platforms. The company demonstrates a prototype of a battery enclosure based on carbon fibers. However, hybrid composites with a mixture of glass and carbon fibers are also possible.

In the aerospace sector, SGL Carbon is also expanding its portfolio of realized projects and expertise relying on the trend to use more efficient materials and processes in this industry too.
In the area of primary structure components, the company will present a demo exhibit for the door frame of a passenger airplane realized in collaboration with external partners and based on 50k carbon fiber from the SGL Carbon, which is suitable for serial production.

Live simulations and intense exchange at the booth
Visitors can experience live how their ideas can be implemented both sustainably and cost-effectively in composites thanks to simulations. Experts from the company’s own Lightweight and Application Center demonstrate the path from the concept to virtual prototypes using simulation software, with the result visible either to the entire audience or just individual visitors. To prepare, interested parties can contact the team now at the following link: https://www.sglcarbon.com/anmeldung-jec.

On March 4, 2020, the SGL Carbon stand will host its traditional get-together for customers and friends starting at 4 p.m. – no registration necessary.
 

More information:
SGL Carbon JEC World
Source:

SGL Carbon

(c) SGL Carbon
15.01.2020

SGL Carbon: New production hall at the Bonn site

  • Increasing demand for graphite-based automotive solutions
  • Strengthening SGL Carbon’s site in Bonn

Over the past three years, SGL Carbon has invested a total of around 25 million euros in the modernization and expansion of its production capacities for specialty graphite automotive components at the Bonn site. The expansion project was completed at the end of last year and was inaugurated today at the site in an official ceremony. Besides the installation of partly new production facilities and a modernized production set-up, construction of a new, 2,000 m2 large hall for the production of the parts was implemented in the course of the expansion.

  • Increasing demand for graphite-based automotive solutions
  • Strengthening SGL Carbon’s site in Bonn

Over the past three years, SGL Carbon has invested a total of around 25 million euros in the modernization and expansion of its production capacities for specialty graphite automotive components at the Bonn site. The expansion project was completed at the end of last year and was inaugurated today at the site in an official ceremony. Besides the installation of partly new production facilities and a modernized production set-up, construction of a new, 2,000 m2 large hall for the production of the parts was implemented in the course of the expansion.

The background of the expansion is the continuously increasing demand for advanced solutions and products made from graphite in the automotive sector. Due to its durability, high strength, low friction behavior, and high conductivity, the material is suitable for many different automotive applications. Examples include rotors and vanes in vacuum pumps for brake boosters, bearings for exhaust gas management, and sealing rings and bearings for seals in coolant pumps. These solutions include applications for vehicles with conventional combustion engines as well as for e-mobility, thereby making an important contribution to clean driving, higher energy efficiency, and lower emissions.

“Automotive components made from specialty graphite are increasingly becoming the standard in many different applications in the automotive industry. Due to their special properties, they are more and more frequently replacing the materials previously used in pumps and seals, such as plastic and metal. By investing in the modernization and expansion of production in Bonn, we are consolidating our leading position in this market and offering our customers real added value in the close partnership with each other. Through the expansion, we are also strengthening our site in Bonn,” explains Burkhard Straube, President of the business unit Graphite Materials & Systems.

More information:
SGL Carbon
Source:

SGL Carbon

SGL Carbon: Großauftrag für Batteriegehäuse (c) SGL Carbon
SGL Carbon: Großauftrag für Batteriegehäuse
13.01.2020

SGL Carbon: Contract for composite battery enclosures

  • New composite e-mobility application gains momentum
  • Strengthening regional footprint in North America
  • Potential for further extensions

Following the production of first prototypes of battery enclosures for a Chinese automotive manufacturer in 2018, SGL Carbon has now received a contract from a North-American automaker for high-volume serial production of carbon and glass fiber-based composite top and bottom layers for battery enclosures. The serial production of the components will start end of 2020. The carbon fibers and fabrics as well as the assembled components come from SGL Carbon’s fully integrated value chain. On top of this order, there is the potential for more extensions with further substantial volumes for the shared platform business of the manufacturer.

In addition, SGL Carbon has won a smaller volume contract from a European sports car manufacturer to serially produce bottom layers made of composite as of mid-2020. The company is additionally in talks with further automakers to develop and manufacture battery enclosure solutions for their e-car platforms.

  • New composite e-mobility application gains momentum
  • Strengthening regional footprint in North America
  • Potential for further extensions

Following the production of first prototypes of battery enclosures for a Chinese automotive manufacturer in 2018, SGL Carbon has now received a contract from a North-American automaker for high-volume serial production of carbon and glass fiber-based composite top and bottom layers for battery enclosures. The serial production of the components will start end of 2020. The carbon fibers and fabrics as well as the assembled components come from SGL Carbon’s fully integrated value chain. On top of this order, there is the potential for more extensions with further substantial volumes for the shared platform business of the manufacturer.

In addition, SGL Carbon has won a smaller volume contract from a European sports car manufacturer to serially produce bottom layers made of composite as of mid-2020. The company is additionally in talks with further automakers to develop and manufacture battery enclosure solutions for their e-car platforms.

“Driven by the increasing need for e-cars worldwide and thus for new flexible chassis platforms, our composite battery enclosures are a very promising new application in our product portfolio. The recent contract wins show that our approach of developing custom-made solutions based on our integrated value chain offers an excellent value proposition”, says Sebastian Grasser, Head of Automotive Segment.

More information:
SGL Carbon
Source:

SGL Carbon