From the Sector

Reset
465 results
29.07.2021

Autoneum benefited from market dynamics

Solid net profit and further strengthening of the balance sheet thanks to significant revenue and profitability increases

The automobile industry recovered significantly in the first half of 2021 compared to the prior-year period, which had been impacted by the effects of the coronavirus pandemic. Autoneum benefited from the market dynamics and managed to increase its revenue in local currencies by 24.3% in the first semester. EBIT rose to CHF 44.7 million thanks to higher revenues and further progress in the turnaround in North America, corresponding to an EBIT margin of 5.0%. The strong free cash flow of CHF 67.2 million has allowed for a further reduction in net debt.

Solid net profit and further strengthening of the balance sheet thanks to significant revenue and profitability increases

The automobile industry recovered significantly in the first half of 2021 compared to the prior-year period, which had been impacted by the effects of the coronavirus pandemic. Autoneum benefited from the market dynamics and managed to increase its revenue in local currencies by 24.3% in the first semester. EBIT rose to CHF 44.7 million thanks to higher revenues and further progress in the turnaround in North America, corresponding to an EBIT margin of 5.0%. The strong free cash flow of CHF 67.2 million has allowed for a further reduction in net debt.

In the first half of 2021, 29.2% more light vehicles were produced worldwide than in the coronavirus-hit first half of 2020. The market recovery, though significant, was hampered by the global semiconductor shortage, which led to temporary production stoppages and manufacturers producing lower vehicle volumes. Autoneum increased revenue in local currencies by 24.3% in the first six months. In Swiss francs, revenue climbed by 21.9% to CHF 890.3 million. Business Group SAMEA (South America, Middle East and Africa) grew clearly above market, while the shortage of semiconductors in North America in particular impacted the production of models supplied by Autoneum and the revenue development of Business Group North America.

Autoneum managed to improve its operating result (EBIT) considerably by CHF 76.5 million in the first six months compared to the prior-year period. In addition to higher revenues, this was mainly due to the immediate and sustainable adjustment of the cost structure in all Business Groups to the new market reality in 2020 as well as the improved earnings achieved in the turnaround program in North America. Higher material costs, however, had a negative impact on the operating result. EBIT in the amount of CHF 44.7 million (prior-year period: CHF –31.8 million) corresponds to an EBIT margin of 5.0% (prior-year period: –4.4%).

The development of global light vehicle production in the second half of 2021 remains uncertain due to the semiconductor shortage. Although there is a high demand from end customers in all regions, it can be assumed that the shortage of chips will continue to impact automobile production in the second half of the year, but not as severely as in the second quarter of the first half-year.

Revenue in the second half-year 2021 is expected to be higher than in the first semester. Based on the unfavorable allocation of semiconductors to vehicle models supplied by Autoneum in the first half of 2021, revenue development is likely to be slightly below market for the full year 2021. With an easing of the semiconductor shortage, this will normalize.

Source:

Autoneum Management Ltd

20.07.2021

Hexcel: Speeding up new Product Development Cycles for Rassini

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

With more than 15 years of experience in delivering glass fiber prepregs for the serial production of composite leaf springs, Hexcel developed its high-performance HexPly M901 prepreg system specifically for this type of application. HexPly M901 combines the right level of structural performance required with simple processing, providing Rassini with a reliable material solution optimized for rapid development and fine-tuning iterations.

HexPly M901 is a high Tg epoxy resin prepreg system specifically developed for structural components that will be exposed to harsh thermal and environmental conditions.  With short cure cycles of 10 minutes and below producing excellent green, or handling, strength of the composite part for demolding and unidirectional glass fiber aerial weights up to 1,600gsm, HexPly M901 delivers a powerful combination of benefits for suspension component applications.

More information:
Hexcel’s HexPly® Hexcel
Source:

Hexcel Corporation

(c) Schoeller Textil AG
19.07.2021

Change in leadership at Schoeller Textil AG: Kath succeeds Winkelbeiner

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

Schoeller Textil AG, the Swiss textile and technology company, announces a shift in leadership as Joachim Kath takes over as CEO. Following a 10-year career at the global textile solutions brand, CEO Siegfried Winkelbeiner is moving into his retirement later this month. Joachim Kath, who comes from the chemical industry, has been working closely with Winkelbeiner as COO at Schoeller for the past year and a half.

The transition comes after long-term planning. Since February 2020, and in close partnership with Siegfried Winkelbeiner, Joachim Kath (on the left) has been preparing as Schoeller COO to take over its management. Joachim Kath originally comes from Flensburg (DE) and, following his studies of Chemical Engineering in Karlsruhe, shaped his professional career in the chemical industry with Ciba (-Geigy) / BASF in Basel (CH). His career over 30 years has incorporated engineering, production and marketing & sales in diverse management functions – in a wide range of business segments for various industries and areas of application around the globe. Joachim Kath spent 12 years of his career dedicated to textile finishing, with a period of intensive travel in Asia and a 3-year stay in the USA.

Asked how he sees himself, Joachim Kath said: “The common thread running through all my assignments and business activities is process orientation, interest in new paths, and an instinct for what is feasible – with the goal of achieving customer benefits and satisfaction. Kath aims to ensure that Schoeller can continue to face the challenges of changing market requirements with outstanding and exceptional products, while evolving and innovating to stay ahead of consumer needs for the future. High performance capability, sustainable product development, premium quality, reliability, productivity, and keeping the customer as the central focus of all activities continue as essential keys to Schoeller’s continued business success.

Source:

Schoeller Textil AG

INDA: World of Wipes® Conference attracts Professionals Live and In-Person (c) INDA
19.07.2021

INDA: World of Wipes® Conference attracts Professionals Live and In-Person

INDA, the Association of the Nonwoven Fabrics Industry, wrapped up its 15th annual World of Wipes® International Conference, July 12-15, with a presentation of the World of Wipes Innovation Award® to Kimberly-Clark Corporation and the highest attendance record in six years.

This year’s WOW conference welcomed 475 enthusiastic professionals from 14 countries to its in-person World of Wipes® (WOW) International Conference to advance their wipes business. Held in Atlanta, GA, the conference was notable as the first in-person conference in the nonwovens and engineered fabrics industry in 500 days due to the pandemic.

Industry professionals from 33 global companies delivered presentations and answered questions in sessions that included Wipes and the Growing Plastics Debate, Regulatory Requirements for Disinfecting and Sanitizing Wipes, Trends in the Wipes Markets and Among Consumers, Wet Wipe Preservative Innovations, Covid-19 Impacts on Wipes Consumption and Cleaning Habits, Sustainable Wipes Packaging and Dispensing, Nonwoven Substrates for More Sustainable Wipes, and Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities.

INDA, the Association of the Nonwoven Fabrics Industry, wrapped up its 15th annual World of Wipes® International Conference, July 12-15, with a presentation of the World of Wipes Innovation Award® to Kimberly-Clark Corporation and the highest attendance record in six years.

This year’s WOW conference welcomed 475 enthusiastic professionals from 14 countries to its in-person World of Wipes® (WOW) International Conference to advance their wipes business. Held in Atlanta, GA, the conference was notable as the first in-person conference in the nonwovens and engineered fabrics industry in 500 days due to the pandemic.

Industry professionals from 33 global companies delivered presentations and answered questions in sessions that included Wipes and the Growing Plastics Debate, Regulatory Requirements for Disinfecting and Sanitizing Wipes, Trends in the Wipes Markets and Among Consumers, Wet Wipe Preservative Innovations, Covid-19 Impacts on Wipes Consumption and Cleaning Habits, Sustainable Wipes Packaging and Dispensing, Nonwoven Substrates for More Sustainable Wipes, and Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities.

Highlights included the announcement of Kimberly-Clark Scott® 24-Hour Sanitizing Wipes as the winner of this year’s World of Wipes Innovation Award®. The annual award recognizes the product that most expands the use of nonwovens and demonstrates creativity, novelty, uniqueness, and technical sophistication within the entire nonwovens wipes value chain.

Other highlights included the presentation of the 2021 INDA Lifetime Technical Achievement Award to John Poccia. The annual award is nominated by INDA’s Technical Advisory Board and presented to an individual whose technical achievements over a long-standing career have significantly contributed to the technical advancement, success, and growth of the nonwovens industry.

Other presentation highlights included:

  • Recent Developments Under the EU Green Deal and Plastics Strategy – Pandemic Update – Gyongyi David, Attorney at Law, V V G B Advocaten-Avocats, Director- EHS Regulatory, Steptoe & Johnson LLP
  • FDA & EPA Framework of Regulations: Dry Wipes Claims – Tony Herber, Principal Regulatory Consultant/Assistant Federal Team Manager, Scientific & Regulatory Consultants, Inc. (SRC. Inc.)
  • Consumer Wipes Usage During Covid-19 and Future Use – Chris Dresselhuys, Business Director-North American Retail Wipes, Rockline Industries
  • Sustainable Solutions for Wipes – Vishal Bansai, Vice President, Innovation, and Silke Brand-Kirsch, VP, Marketing and Business Development, Glatfelter Gernsbach GmbH
  • Sustainability Impacts Across the Value Chain of Wipes Packaging – Vicky Chang, Marketing Manager, Consumer & Industrial Products, Amcor Flexibles
  • Unveiling Wet Wipes Preservation: New Findings on Microbial Risks and Preservative Solution – Paul Salama, Ph.D., CTO& Head of Innovation, Sharon Laboratories
19.07.2021

ISKO to work with the MIT Computer Science & Artificial Intelligence Lab

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

Source:

ISKO / Menabò Group srl

16.07.2021

Eruslu Nonwovens Group: Entering Biodegradable Nonwoven Market with Truetzschler Nonwovens’ Machinery

Truetzschler Nonwovens will deliver equipment to enlarge an existing spunlacing line - put into operation in 2015 at the Turkish Eruslu Nonwovens Group - into a flexible, state-of-the-art production line for various light to heavy weight sustainable nonwovens.

Last year Eruslu decided to broaden its portfolio in the wipes segment by adding biodegradable products from renewable resources. The group took full advantage of the 2015 small capacity line and went for:

  • a second NCR random and a NCA airlay card
  • fiber preparation and card feeding equipment for the two new cards
  • more hydraulic power to reliably and efficiently hydroentangle multi-layer webs
  • an extension to the dryer for increased evaporation capacity

After starting up in the second half of 2022, Eruslu will be operating an ultra-modern, highly flexible NCR-NCA-NCR spunlace line, the first of its kind in Turkey. The line is tailor-made to process virgin cotton fibers, comber noils and short fibers at high speeds. End products are top-quality, lightweight natural wipes or heavy-weight, three-layer nonwovens for cosmetic pads.

Truetzschler Nonwovens will deliver equipment to enlarge an existing spunlacing line - put into operation in 2015 at the Turkish Eruslu Nonwovens Group - into a flexible, state-of-the-art production line for various light to heavy weight sustainable nonwovens.

Last year Eruslu decided to broaden its portfolio in the wipes segment by adding biodegradable products from renewable resources. The group took full advantage of the 2015 small capacity line and went for:

  • a second NCR random and a NCA airlay card
  • fiber preparation and card feeding equipment for the two new cards
  • more hydraulic power to reliably and efficiently hydroentangle multi-layer webs
  • an extension to the dryer for increased evaporation capacity

After starting up in the second half of 2022, Eruslu will be operating an ultra-modern, highly flexible NCR-NCA-NCR spunlace line, the first of its kind in Turkey. The line is tailor-made to process virgin cotton fibers, comber noils and short fibers at high speeds. End products are top-quality, lightweight natural wipes or heavy-weight, three-layer nonwovens for cosmetic pads.

Source:

Trützschler Nonwovens & Man Made Fibers GmbH

COBRA continues Its Partnership with Fliteboard (c) COBRA
11.07.2021

COBRA continues Its Partnership with Fliteboard

COBRA International is pleased to confirm its continued partnership with Fliteboard as the builders of the new Fliteboard Series 2.  

Conceived in 2016, the Fliteboard range of electric foiling surfboards has established a leading position in the eFoil market. In early 2021, Fliteboard announced a package of evolutionary improvements to the original award-winning design for which COBRA has installed significant additional manufacturing capacity.

With Fliteboard growing rapidly, and thousands of boards now delivered across more than 80 countries,  COBRA will continue to support Fliteboard with additional moulds and lean manufacturing production lines added to reduce customer lead times. In addition to this production capacity expansion, COBRA has successfully met the technical challenges set by the Fliteboard team to incorporate all the new Series 2 board features into the existing production processes.

COBRA International is pleased to confirm its continued partnership with Fliteboard as the builders of the new Fliteboard Series 2.  

Conceived in 2016, the Fliteboard range of electric foiling surfboards has established a leading position in the eFoil market. In early 2021, Fliteboard announced a package of evolutionary improvements to the original award-winning design for which COBRA has installed significant additional manufacturing capacity.

With Fliteboard growing rapidly, and thousands of boards now delivered across more than 80 countries,  COBRA will continue to support Fliteboard with additional moulds and lean manufacturing production lines added to reduce customer lead times. In addition to this production capacity expansion, COBRA has successfully met the technical challenges set by the Fliteboard team to incorporate all the new Series 2 board features into the existing production processes.

Fliteboard’s first composite models used a carbon fibre and Innegra sandwich laminate over a moulded EPS foam core, combining maximum strength, stiffness, and durability with a low overall board weight. The same construction concept is used for the Series 2 boards, with several new finishes added to the range along with lighter colour matched EVA deck pads and upgraded latches on the carbon fibre board lid. New wood grain and metallic paint finishes have been introduced with COBRA’s semi-transparent paint system used to save weight and display the stunning hexagonal weave pattern of the carbon and Innegra reinforcement fabrics.

Source:

COBRA / 100% Marketing

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications (c) Hexcel Corporation
07.07.2021

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

Source:

Hexcel Corporation / 100% Marketing

Iluna Group brings to Milano Unica a new generation of responsible quality (c) ILUNA Group
06.07.2021

Iluna Group brings to Milano Unica a new generation of responsible quality

Iluna Group comes back to Milano Unica with a great and important goal: to relaunch the qualities and dimensions of sustainability by going beyond the ingredient.

Iluna’s new path, which was born in a moment when the market seems to speak about “fragility”, begins with the investment in the renewal of machines, which allow it to fly ever higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. Including cord yarn, shiny threads and an expansion of the range of GRS yarns, previously available only opaque. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

Iluna Group comes back to Milano Unica with a great and important goal: to relaunch the qualities and dimensions of sustainability by going beyond the ingredient.

Iluna’s new path, which was born in a moment when the market seems to speak about “fragility”, begins with the investment in the renewal of machines, which allow it to fly ever higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. Including cord yarn, shiny threads and an expansion of the range of GRS yarns, previously available only opaque. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

The printing processes are also born from this constant search for innovation towards new materials and new techniques, becoming more and more sustainable: Global Recycle Standard (GRS)-certified sublimation printing and register printing carrying Global Organic Textile Standard (GOTS) certification. This one overlap exactly on the design and color the details, reaching where the dye cannot reach.

Diversification has become essential in today’s competitive market and the fragility of the moments experienced in 2020 was the stimulus to return to being here again, to return to action. Flexibility is the watchword today, along with research. And Iluna has managed to go further: starting from the ingredients at the base of the materials, last year launched a collection with natural dyes made with GOTS certified plant-based dyes, up to proposing magnificent prints with extraordinary effects for this edition of the Milanese fair.

The three dimensions of sustainability, design and innovation are thus finally linked thanks to valuable partnerships with expert and excellent reference companies that have allowed these new developments and these unique results thanks to advanced technologies designed specifically for Iluna, which is today the only company to offer ingredients, natural colors and prints, all three strictly certified.

05.07.2021

Infinited Fiber Company raises EUR 30 million from new Investors

Circular fashion and textile technology group Infinited Fiber Company has secured investments totaling 30 million euros in its latest financing round completed on June 30. The round also brought Infinited Fiber Company new investors, including sportswear company adidas, Invest FWD A/S, which is BESTSELLER’s investment arm for sustainable fashion, and investment company Security Trading Oy. Among the existing investors contributing to this round of financing were fashion retailer H&M Group, who was the lead investor, investment company Nidoco AB, and Sateri, the world’s largest viscose producer and a member of the RGE group of companies.

Circular fashion and textile technology group Infinited Fiber Company has secured investments totaling 30 million euros in its latest financing round completed on June 30. The round also brought Infinited Fiber Company new investors, including sportswear company adidas, Invest FWD A/S, which is BESTSELLER’s investment arm for sustainable fashion, and investment company Security Trading Oy. Among the existing investors contributing to this round of financing were fashion retailer H&M Group, who was the lead investor, investment company Nidoco AB, and Sateri, the world’s largest viscose producer and a member of the RGE group of companies.

This securement of new funding follows Infinited Fiber Company’s April announcement of plans to build a flagship factory in Finland in response to the strong growth in demand from global fashion and textile brands for its regenerated textile fiber Infinna™. The factory, which will use household textile waste as raw material, is expected to be operational in 2024 and to have an annual production capacity of 30,000 metric tons. The new funding enables Infinited Fiber Company to carry out the work needed to prepare for the flagship factory investment and to increase production at its pilot facilities in the years leading to 2024.

“We are really happy to welcome our new investors and grateful for the continued support from our older investors,” said Infinited Fiber Company co-founder and CEO Petri Alava. “These new investments enable us to proceed at full speed with the pre-engineering, environmental permits, and the recruitment of the skilled professionals needed to take our flagship project forward. We can now also boost production at our pilot facilities so that we can better serve our existing customers and grow our customer-base in preparation for both our flagship factory and for the future licensees of our technology.”

H&M Group is one of Infinited Fiber Company’s earliest investors. They first invested in Infinited Fiber Company in 2019.

H&M Group has also signed a multiyear sales deal with Infinited Fiber Company to secure its access to agreed amounts of Infinna from the planned flagship factory.

New investor BESTSELLER has struck a similar sales deal with Infinited Fiber Company.

In addition to strong interest by global fashion leaders, the technology has significant promise for major textile fiber producers. Allen Zhang, President of Sateri, said: “Sateri is excited to continue to invest in and collaborate with Infinited Fiber Company as part of our long-term commitment towards closed-loop, circular and climate-positive cellulosic fibers. This financing round marks a major milestone for our collaboration in scaling up next-generation fiber solutions.”

Infinited Fiber Company’s flagship plant preparations are also proceeding on other fronts. Several Nordic and international investment banks have given Infinited Fiber Company proposals on the financing options for the investment.

Infinited Fiber Company’s technology turns cellulose-based raw materials, like cotton-rich textile waste, into Infinna, a unique, premium-quality regenerated textile fiber with the natural, soft look and feel of cotton. Infinna is biodegradable and contains no microplastics, and at the end of their life, garments made with it can be recycled in the same process together with other textile waste.

Source:

Infinited Fiber Company

Marabu to be climate neutral from July 2021 (c) Marabu GmbH & Co. KG
01.07.2021

Marabu to be climate neutral from July 2021

Marabu is one of the first ink manufacturers to achieve climate neutrality. All Marabu Business Units will, where possible, make a specific contribution to achieve the 17 United Nations Sustainable Development Goals (SDGs) with PROJECT GREEN and therefore participate in the Green Deal.

Marabu is one of the first ink manufacturers to achieve climate neutrality. All Marabu Business Units will, where possible, make a specific contribution to achieve the 17 United Nations Sustainable Development Goals (SDGs) with PROJECT GREEN and therefore participate in the Green Deal.

"We are safeguarding the future of the next generations and are proud that we have managed to be a climate neutral company from July 2021 with the Tamm and Bietigheim sites. All our products, whether printing inks or creative colours, are climate neutral, too," explains York Boeder, CEO Executive Committee. "Our so-called PROJECT GREEN combines all measures that are taking us on our journey to climate neutrality. Climate protection is a particular concern for us, to which we have made a binding commitment within the scope of an extensive sustainability strategy. In accordance with our Marabu Green Deal, we avoid and reduce emissions wherever possible, e. g. by using green electricity, energy-saving schemes, mobility concepts or environmentally friendly materials. We offset all unavoidable CO2 emissions by supporting internationally certified climate protection projects. We are continually implementing measures to improve our carbon footprint and update them annually to make their success measurable. We have therefore set ourselves the active goal of reducing our CO2 emissions by another 25 % by 2030."

For decades, Marabu has invested in the research and development of safe production processes, environmentally friendly products, and clean technologies with the aim of preserving the natural environment. Marabu has worked with Climate Partner to analyse all the CO2 emissions from the sites in Tamm and Bietigheim and determine its carbon footprint. Including all product-related factors such as raw materials and logistics, Marabu currently generates approx. 18,500 tons of unavoidable CO2 emissions. This value is the positive result of a number of climate-friendly measures pursued by Marabu, such as the early switch to green electricity in 2007.

Marabu's main activities to avoid and reduce CO2 emissions:

  • Energy - Switching to green electricity from hydropower
  • Mobility - Migration of the company's vehicles to electric and hybrid cars as well as in e-charging stations
  • Production - Use of renewable energies and resource-efficient production processes
  • Raw materials - Replacing critical substances with environmentally friendly alternatives for new and existing products
  • Transporting - Climate-neutral freight carriers and lower-emission transport methods like shipping or road transport replace air freight wherever possible
  • Product technology - Modern, low-emission products
Source:

Marabu GmbH & Co. KG

Avgol invests in new capabilities at Russian facility (c) Avgol
28.06.2021

Avgol invests in new capabilities at Russian facility

  • New high-capacity line enables diversification to meet growing demand

Avgol, a global leader in the manufacture of high performance non-woven fabric solutions, has announced it is investing in a new high-speed, high-capacity flexible multiple beam production line at its facility in Uzlovaya, Russia.

“The addition of this new line enables us to have greater production capacity for growing regional markets and support the release of new Avgol technologies,” said Tommi Bjornman, CEO of Avgol.
“Serving the growing baby diaper, adult incontinence and feminine hygiene markets along with satisfying sustained demand for meltblown filtration and medical materials, this investment enables Avgol to deliver an improved degree of service across the entire area while consolidating and strengthening our existing position,” he said.

  • New high-capacity line enables diversification to meet growing demand

Avgol, a global leader in the manufacture of high performance non-woven fabric solutions, has announced it is investing in a new high-speed, high-capacity flexible multiple beam production line at its facility in Uzlovaya, Russia.

“The addition of this new line enables us to have greater production capacity for growing regional markets and support the release of new Avgol technologies,” said Tommi Bjornman, CEO of Avgol.
“Serving the growing baby diaper, adult incontinence and feminine hygiene markets along with satisfying sustained demand for meltblown filtration and medical materials, this investment enables Avgol to deliver an improved degree of service across the entire area while consolidating and strengthening our existing position,” he said.

Avgol, an Indorama Ventures Limited company, leads the global hygiene market with the most comprehensive range of ultra-lightweight spun-melt nonwoven fabrics. This new line at the company’s Uzlovaya facility, in the Tula Oblast region of Russia, will see Avgol investing in new Reicofil 5 (RF5) technology. The third line for this location will include biocomponent and corresponding high-loft capabilities thus producing materials for applications that meet the needs of upper tier products for Hygiene customers.

As part of the investment, Avgol is including new capacity for meltblown production with a dedicated line, ensuring a continuous supply of this critical material for the region. One other aspect of the investment, and a new inhouse capability for Avgol, includes the addition of cutting-edge lamination capabilities. These capabilities will allow Avgol to offer enhanced performance products into the existing markets the company serves, as well as allowing the company to explore new opportunities in other markets. “The RF5 line, meltblown line and lamination capabilities will provide us a powerful set of platforms as a base from which to provide high-value products for our customers,” said Mr. Bjornman.  “It will enable us to further diversify the Avgol innovation portfolio while remaining true to our roots.”

Mr. Bjornman further commented that the investment will also significantly support further sustainable product development in Avgol, under its innovative FIT™ (Forward Innovative Thinking) strategy. “Avgol is committed to the future of nonwoven fabrics with a particular focus on bringing polyolefins forward as viable resins in single use articles,” he said. “We are excited to bring new assets, new capabilities, and new technologies that will challenge customer expectations of the nonwoven fabric industry.” This investment will move the Russian production facility to the second largest site for Avgol (the largest facility remains the Mocksville site in North Carolina, USA).

Source:

PHD Marketing Ltd

Infinited Fiber and Patagonia seal Multiyear Sales Deal (c) Infinited Fiber Company
28.06.2021

Infinited Fiber Company and Patagonia seal Multiyear Sales Deal

Outdoor apparel company Patagonia and circular fashion and textile technology group Infinited Fiber Company have signed a multiyear sales agreement for Infinited Fiber Company’s unique, premium-quality regenerated textile fiber Infinna™, which is created out of textile waste. The move marks a major milestone for both companies towards making textile circularity an everyday reality: The deal guarantees Patagonia access to the limited-supply fiber over the coming years and secures future sales income for Infinited Fiber Company as it ramps up production.

Infinna is a unique, virgin-quality regenerated textile fiber with the soft and natural look and feel of cotton. It is created from cotton-rich textile waste that is broken down at the molecular level and reborn as new fibers. Because it’s made of cellulose – a building block of all plants – Infinna is biodegradable and contains no microplastics to clog our seas. Clothes made with it can be recycled again in the same process together with other textile waste.

Outdoor apparel company Patagonia and circular fashion and textile technology group Infinited Fiber Company have signed a multiyear sales agreement for Infinited Fiber Company’s unique, premium-quality regenerated textile fiber Infinna™, which is created out of textile waste. The move marks a major milestone for both companies towards making textile circularity an everyday reality: The deal guarantees Patagonia access to the limited-supply fiber over the coming years and secures future sales income for Infinited Fiber Company as it ramps up production.

Infinna is a unique, virgin-quality regenerated textile fiber with the soft and natural look and feel of cotton. It is created from cotton-rich textile waste that is broken down at the molecular level and reborn as new fibers. Because it’s made of cellulose – a building block of all plants – Infinna is biodegradable and contains no microplastics to clog our seas. Clothes made with it can be recycled again in the same process together with other textile waste.

In April, Infinited Fiber Company announced plans to build a flagship factory in Finland to meet the growing demand for Infinna from global fashion brands. It is currently supplying customers from its R&D and pilot facilities in Espoo and Valkeakoski, Finland. The planned flagship factory will have an annual production capacity of 30,000 metric tons, which is enough fiber for roughly 100 million T-shirts made with 100% Infinna. Infinited Fiber Company expects to have sold the new factory’s entire output for several years during 2021.

More than 92 million metric tons of textile waste is produced globally every year and most of this ends up in landfills or incinerators. At the same time, textile fiber demand is increasing, with Textile Exchange estimating the global textile fiber market to grow 30% to 146 million metric tons by 2030 from 111 million metric tons in 2019. Infinited Fiber Company’s fiber regeneration technology, which uses cellulose-rich waste streams as its raw material, offers a solution both to stop waste from being wasted and to reduce the burden of the textile industry on the planet’s limited natural resources.

24.06.2021

The EFI Reggiani BOLT delivers higher Image Quality

Electronics For Imaging, Inc. has enhanced its fastest digital textile printer, the EFI™ Reggiani BOLT. The upgrade is a combination of hardware and software enhancements that will minimise artefacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Now available globally, the EFI Reggiani BOLT upgrade features hardware and software enhancements for improved overall performance, printing quality, uniformity, and increased user friendliness including:

Electronics For Imaging, Inc. has enhanced its fastest digital textile printer, the EFI™ Reggiani BOLT. The upgrade is a combination of hardware and software enhancements that will minimise artefacts, compensating for missing nozzles that may occur over time and enhancing uniformity to deliver smoother solid colours. The upgrade also delivers improved quality and smoother gradients, plus it enables faster printhead replacement and drastically increases file processing speed by up to 200% for large, complex files.

Now available globally, the EFI Reggiani BOLT upgrade features hardware and software enhancements for improved overall performance, printing quality, uniformity, and increased user friendliness including:

  • Nozzle out and uniformity compensation features that improve solid colour appearance and enhance overall printing quality
  • Increased performance and improved processing speed for large, complex files
  • Integration of a new digital camera that both provides for precise and consistent print results and shortens the time for print head replacement and alignment
  • An enhanced user interface – based on EFI Fiery Command WorkStation® 6.0 – that is easier to use
  • Fiery Smart Ink Estimator, a key tool to help determine job profitability based on accurate calculation of ink costs prior to printing.
21.06.2021

EFI MarketDirect StoreFront for Events and Exhibitions

– A brand-new Rentals and Reservations module for EFI™ MarketDirect StoreFront web-to-print software from Electronics For Imaging, Inc. helps print businesses, marketing service providers and other organisations manage resources, assets and products in inventory and rent them out for events and exhibitions. This first-of-its-kind print eCommerce innovation gives users the ability to define an event, its dates and location, then identify which products are available for that time – providing cost by the hour, day or month – and check out, securing the resources from the print provider.

The newly available module addresses a re-emerging need for graphics and marketing support for tradeshows, conferences and other events. It also follows an accelerated schedule of enhancements to the award-winning MarketDirect StoreFront platform, including:

– A brand-new Rentals and Reservations module for EFI™ MarketDirect StoreFront web-to-print software from Electronics For Imaging, Inc. helps print businesses, marketing service providers and other organisations manage resources, assets and products in inventory and rent them out for events and exhibitions. This first-of-its-kind print eCommerce innovation gives users the ability to define an event, its dates and location, then identify which products are available for that time – providing cost by the hour, day or month – and check out, securing the resources from the print provider.

The newly available module addresses a re-emerging need for graphics and marketing support for tradeshows, conferences and other events. It also follows an accelerated schedule of enhancements to the award-winning MarketDirect StoreFront platform, including:

  • AutoEngage – an abandoned shopping cart feature that drives increased engagement and transaction completion rates;
  • MarketDirect Fulfillment, a modular and flexible inventory management and warehousing solution that helps printers quickly and easily build and manage fulfilment tasks for their clients; and
  • Google® Tag Manager and Analytics tools that make measuring web to print performance easier than ever.
Source:

EFI

16.06.2021

Closed-loop recycling pilot project for single-use facemasks

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

“Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production”, says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. “But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s Technology & Innovation specialists to investigate potential solutions.”

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

“A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling, would have not done the job”, explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. “In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products”, adds Hofmann, who is also Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new PP resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. Mass balance is considered a crucial bridge between today’s large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

“The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain”, emphasizes Mark Vester, Global Circular Economy Leader at SABIC. “The circular material is part of our TRUCIRCLE™ portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources.”

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material. “This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics”, says Hansjörg Reick, P&G Senior Director Open Innovation. “Of course, further work is needed but the results so far have been very encouraging.”

The entire closed loop pilot project from facemask collection to production was developed and implemented within seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Source:

Fraunhofer

JUMBO-Textil: Provider for narrow textiles in the fitness and rehabilitation sector (c) JUMBO-Textil
Flexible fitness textiles: cords and cables by JUMBO-Textil
08.06.2021

JUMBO-Textil: Provider for narrow textiles in the fitness and rehabilitation sector

There are good reasons why narrow textiles are used so frequently in the fitness and rehabilitation sector: they are flexible, safe, light, durable, skin-friendly and have a low injury potential. Essential components are JUMBO textiles: Elastics can be used to convert kinetic energy into potential energy. This is why elastic cords and cables are some of the essential components of almost all fitness equipment and tools. After all, it is the elasticity of the trampoline cords that gives the jumping-sheet its necessary force. Only elasticated expander cords create the desired resistance of the classic strength training equipment.

The force-elongation ratio of elastic cords and cables – like all other properties – is specified individually and optimally for the respective application. Depending on the specific requirements of the narrow textiles in the respective product, expert teams develop cords and cables made of high-tech fibres and on high-tech equipment: technical textiles that are a perfect fit for the equipment and its functions.

There are good reasons why narrow textiles are used so frequently in the fitness and rehabilitation sector: they are flexible, safe, light, durable, skin-friendly and have a low injury potential. Essential components are JUMBO textiles: Elastics can be used to convert kinetic energy into potential energy. This is why elastic cords and cables are some of the essential components of almost all fitness equipment and tools. After all, it is the elasticity of the trampoline cords that gives the jumping-sheet its necessary force. Only elasticated expander cords create the desired resistance of the classic strength training equipment.

The force-elongation ratio of elastic cords and cables – like all other properties – is specified individually and optimally for the respective application. Depending on the specific requirements of the narrow textiles in the respective product, expert teams develop cords and cables made of high-tech fibres and on high-tech equipment: technical textiles that are a perfect fit for the equipment and its functions.

Furthermore, non-elastic cords – depending on type and design – are essential as tension and connection elements for the functionality of fitness equipment. Textile components are often also an integral part of the equipment technology as fastening or fixing systems.

Source:

JUMBO-Textil / stotz-design.com

Techtextil and Texprocess 2022: registration now open (c) Messe Frankfurt
08.06.2021

Techtextil and Texprocess 2022: registration now open

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022.

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Source:

Messe Frankfurt

PCMC’s new Paragon reimagines the possibilities of tissue rewinding (c) PCMC
08.06.2021

PCMC’s new Paragon reimagines the possibilities of tissue rewinding

Winding technology offers simplicity, productivity and product control for premium tissue products

Paper Converting Machine Company (PCMC)—a division of Barry-Wehmiller and a global supplier of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries— is pleased to announce the launch of its Paragon tissue rewinder.

Paragon features a patent-pending center-surface design that produces superior caliper, bulk and diameter flexibility. Log winding takes place in a new-concept nest, comprised of a winding drum, winding belt, compound-motion rider roll and center drives.

"Paragon offers a completely new method of tissue rewinding,” said Andrew Green, PCMC Vice President of Tissue and Folding. “It is radical only in the sense that we made the wind nest as simple as possible. Usually when you increase a machine’s speed, you sacrifice ease of use, but we know customers want both. With Paragon, we created a machine capable of higher speeds that is easier to operate. It’s remarkable.”

Winding technology offers simplicity, productivity and product control for premium tissue products

Paper Converting Machine Company (PCMC)—a division of Barry-Wehmiller and a global supplier of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries— is pleased to announce the launch of its Paragon tissue rewinder.

Paragon features a patent-pending center-surface design that produces superior caliper, bulk and diameter flexibility. Log winding takes place in a new-concept nest, comprised of a winding drum, winding belt, compound-motion rider roll and center drives.

"Paragon offers a completely new method of tissue rewinding,” said Andrew Green, PCMC Vice President of Tissue and Folding. “It is radical only in the sense that we made the wind nest as simple as possible. Usually when you increase a machine’s speed, you sacrifice ease of use, but we know customers want both. With Paragon, we created a machine capable of higher speeds that is easier to operate. It’s remarkable.”

Many of Paragon’s subsystems are proven technology solutions in use on PCMC’s trusted Forte rewinder, with several upgrades. Paragon’s enhanced web handling and grade changes are mainly recipe-driven, and its specially designed tools guide fast calibrations. Like the Forte rewinder, Paragon has an intentional open-access design, plus, typical areas to clean require less frequent attention, and recovery and restart occur safely and quickly. Paragon also closes the gap between humans and machines with a new Smart Touch human-machine interface (HMI), which delivers Industry 4.0 tools that transform data to action. Following high-performance design principles, the clean and modern interface provides enhanced operator help, and new smart analytic features offer insights to improve overall equipment effectiveness. The Smart Touch HMI works much like today’s mobile devices with swipe functionality, enabling a short learning curve and improved productivity.

“While the focus is on the new wind nest, a Paragon line is more than that,” said Green. “We added elements like advanced web handling and a state-of-the-art HMI. At PCMC, we are not into hyperbole, but we believe that this machine has raised the bar and is what future tissue-converting machines will be judged against. And, that’s why we called it Paragon.” 

Source:

Paper Converting Machine Company

Beaulieu Fibres International: Fibresand and Fibre Reinforced Rootzones (c) Nottingham Forest Football Club
Beaulieu Straight Fibres - Nottingham Forest natural grass reinforced rootzones
04.06.2021

Beaulieu Fibres International: Fibresand and Fibre Reinforced Rootzones

Mansfield Sand Limited’s sports sand and rootzones are reinforced with polypropylene straight fibres from Beaulieu Fibres International.

  • PP straight fibres manufactured in Belgium by Beaulieu Fibres International
  • Fibres distributed in the UK by James Robinson Fibres
  • Product developed and manufactured by Mansfield Sand.
  • The technology increases pitch stability and resilience even with frequent and intensive use.

Fibresand and Reinforced Rootzones are manufactured in the UK by Mansfield Sand, one of the the leading suppliers of the product. Fibresand and Reinforced Rootzones are a natural sports product reinforced with Beaulieu’s PP Straight Fibre, distributed in the UK by James Robinson Fibres. Used in the top 100mm within the pitch construction profile, it enhances the natural grass root structure while giving the pitches increased stability and resilience.

Many Premiership, EFL and Scottish clubs are choosing Fibresand and Fibre Reinforced Rootzone.

Mansfield Sand Limited’s sports sand and rootzones are reinforced with polypropylene straight fibres from Beaulieu Fibres International.

  • PP straight fibres manufactured in Belgium by Beaulieu Fibres International
  • Fibres distributed in the UK by James Robinson Fibres
  • Product developed and manufactured by Mansfield Sand.
  • The technology increases pitch stability and resilience even with frequent and intensive use.

Fibresand and Reinforced Rootzones are manufactured in the UK by Mansfield Sand, one of the the leading suppliers of the product. Fibresand and Reinforced Rootzones are a natural sports product reinforced with Beaulieu’s PP Straight Fibre, distributed in the UK by James Robinson Fibres. Used in the top 100mm within the pitch construction profile, it enhances the natural grass root structure while giving the pitches increased stability and resilience.

Many Premiership, EFL and Scottish clubs are choosing Fibresand and Fibre Reinforced Rootzone.

Beyond football, Mansfield Sand Fibresand products are being used in a variety of winter sports pitches, the equine market and are increasingly being specified for urban public green space and landscape projects to reinforce natural grass areas and maintain aesthetics even when suffering from heavy traffic burden.