From the Sector

At JEC World 2020, MECELEC COMPOSITES is a finalist of the JEC Innovation Awards in the Design & Furniture category. The Group announces the launch of a new sustainable development application on the urban design market. MECELEC COMPOSITES designed the first mass-produced flax fibre roofs for the 550 Morris columns installed by JCDecaux in Paris. “This is the first application of flax fibre BMC for mass production. The new solution combines all the advantages of composite materials, lightness and strength, with stringent environmental requirements and is adapted to the safety constraints of this kind of street furniture,” says Bénédicte Durand, Chief Executive Officer at MECELEC COMPOSITES.

A COMPOSITE ROOF THAT IS BOTH INNOVATIVE AND GREEN
The dome of the Morris columns is composed of 23 different parts, 14 of which are made from composite materials. To design the roof, MECELEC COMPOSITES developed a new RTM complex and a new BMC material, that is reinforced exclusively with a flax mat. “Today it is the only BMC with a 100% flax fibre reinforcement, which uses a partially recycled ABS resin. It was created specifically for this project and we had to work on the processes in order to adapt them to this new material,” explains Bertrand Vieille, Head of sales.
In the design, MECELEC COMPOSITES replaced the bonding process with a time-saving mechanical assembly process using an invisible fixing system.

AN ECO-FRIENDLY APPLICATION IN LINE WITH THE GROUP’S ECO-DESIGN CSR APPROACH
MECELEC COMPOSITES creates scalable, sustainable and environmentally-friendly street furniture. The Group is committed to developing a sustainable production process and reuses all its waste materials. MECELEC COMPOSITES R&D laboratory promotes eco-design with a process of characterisation and mechanical sizing of parts. “For this project, we imagined, created, produced and delivered a mass-produced composite application with a low environmental impact within less than a year. At the end of its lifecycle, the product completely breaks down, leaving no fibre residue,” Bénédicte Durand concludes.

The JEC innovation awards is a long-established and worldwide program with three simple goals: identify, promote, and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality, or commercial applications of innovations.

« Every year, JEC rewards the best cutting-edge and ingenious projects using composites to their full potential in different categories. The JEC Innovation Awards program is emblematic and recognizes pioneers in composite innovation continuously reinventing the composites of tomorrow», says Franck GLOWACZ, Innovation Content Leader at JEC Group.

The winners have been rewarded for their innovative solutions, in 10 categories:

• Aerospace
• Automotive - Exterior
• Automotive - Structural
• Electrical, Electronics & Appliances
• Industrial Equipment
• Marine
• Railway
• Renewable Energy
• Smart Composites
• Sports & Leisure

The awards ceremony took place place on November 14, 2019, at 5:30 pm at the Startup Branch, COEX. Ben Bassat, President and CEO of Plataine Avner opened the ceremony with a keynote about “The 4th industrial revolution: implementing IIOT and AI to composite materials and manufacturing”.

Lenzing was awarded for the introduction of the blockchain technology for fiber identification as well as its achievements as a leading company and significant economic engine in the region

On November 4, 2019, Lenzing AG won the “Digital Corona” in Gold. The coveted business prize was awarded for the first time in this category. It is awarded to companies that have dynamically advanced the digitization of business processes, products, services and business models in recent years. At the premiere, Lenzing was delighted to receive the first prize for the introduction of the blockchain technology for fiber identification along the textile value chain.

“Consumers increasingly want to understand the ingredients and suppliers of the products they buy, requesting a new level of transparency and traceability. With the introduction of blockchain technology, Lenzing is pursuing the ambitious goal of creating full transparency across the value chain, driving change in an industry where less than five percent of the top 250 apparel brands can track their garments back to the fiber origin”, Stefan Doboczky, CEO of the Lenzing Group, says. Lenzing enables its customers and partners to identify TENCEL ™ branded fibers across each production and distribution step from fiber-to-retail. The technology also allows consumers to verify the garment composition and the underlying textile supply chain at the point of sale, simply by scanning the barcode with a mobile device. As a result, Lenzing also directly supports the business with its very sustainably produced TENCEL™ lyocell fibers.

JEC Asia is the major, most insightful composites event in Asia-Pacific for products, solutions, net-working, and advanced industry thinking - 3 full days of Business, Innovation & Knowledge

JEC ASIA KEY FIGURES

• 7,000+ professional visits
• 245+ exhibiting companies from 49 countries
• 3 conference sessions
• 40+ International speakers
• 450+ business meetings
• Startup Booster competition
• Innovation awards and planet
• In parallel to eMove360° Asia

Paris - For its 12th edition and third time in Seoul, JEC Asia 2019 will gather companies from the entire composites value chain in Asia Pacific to present their latest capabilities and innovations to the composites community and the strategic end-user’s market including: Mobility, Aeronautics, Building & Construction. This year more than 245 exhibiting companies are expected with thousands of professionals from 49
countries to network, exchange ideas, explore new opportunities and strengthen their business partnerships.

Addressing the impact of composites in Mobility 4.0

During the press conference held in Seoul on July 9th to introduce JEC Asia 2019 and eMove Asia 360° main features, a roundtable gathering speakers, experts and academics from prestigious Korean research centers specialized in carbon and composites — along with Hyundai Motor and KCTech composites experts, eMove360°’s CEO & Publisher and Korean Electric Vehicle Association representatives — exchanged their views on the impact of composites in today's and tomorrow's mobility in the world with a focus on the Korean market. Discussions centered around the challenges raised by Mobility 4.0 (electric connected and autonomous vehicles) and how composites can offer highly adapted solutions for the new challenges faced by this sector, particularly in the context of the rising electrification of vehicles.

Hence, the 2019 edition of JEC Asia will welcome for the first time the eMove360° ASIA exhibition and conferences focusing on Trends in electric & autonomous mobility, Battery & Powertrain and Charging & Energy.

Celebrating Innovation and Knowledge

JEC Asia 2019 will also host the 2nd leg of the JEC Startup Booster competition, the leading startup competition in the world of composites will enable companies to find and assess innovations with a potential impact on their respective industry. The 10 finalists selected in the region by a prestigious jury, will pitch their project to win a chance to showcase their work at JEC World 2020 in Paris. The JEC Innovation Awards is a long-established and worldwide program with 3 simple goals: identify, promote and reward the most innovative composite solutions in the world. Over the past 15 years, the JEC Innovation Program has involved 1,800 companies worldwide; 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations. The award ceremony will take place on the second day of JEC Asia, on November 14th, 2019.

JEC Asia 2019 will also feature a fulfilling conference program with experts from the industry giving their insights on the latest developments in high-performance composite technologies and applications.

JEC Asia 2019 conferences main themes will focus on:

• International Carbon Festival Conference organized with our partner, KCTech.
• Automotive composite golden triangle: low CAPEX, low cost but high volume
• Automotive hybrid solutions: take the best of each material
• Aeronautics: faster processes and new materials
• Business opportunities (Raw materials, Process, Application, Countries, Region)
Finally, JEC Asia offers the opportunity to visit Composites sites. This year professionals will live a full experience of South Korea composites Industry visiting: Hanyang University, Kookmin University with Hankuk Carbon, Win & Win Co or Korean Carbon with KCTech in Jeonju.

See you @JEC Asia 2019 and eMove360° Asia, November 13 to 15,  Seoul Coex Convention and Exhibition Center

On the international stage of JEC World, composite innovation is everywhere! On the planets, on the live demo zones, on the stands, and also on stage... During this second day of the world's largest composites exhibition, the winners of the JEC Innovation Awards were announced.

JEC Innovation Awards celebrate the fruitful cooperation between players of the composite community. Over the past 15 years, the JEC Innovation Awards have brought in 1,800 companies worldwide. 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations.

The ceremony was opened by Bertrand Piccard, the founder and visionary behind Solar Impulse, the first zero-fuel aircraft with perpetual autonomy.

The jury then announced the ten composite innovation champions selected among 30 finalists, from more than a hundred entries, and the public awarded its prize.
"JEC Group supports innovation and has created the Composites Reference Prize to reward industry champions and promote their innovations. Every year, we receive more than a hundred applications from all over the world," explains Franck Glowacz, Composites Expert at JEC Group.

Download the PDF to see all winning companies.

• Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

JEC Innovation Awards celebrate the fruitful cooperation between players of the composite community. Over the past 15 years, the JEC Innovation Awards have brought in 1,800 companies worldwide. 177 companies and 433 partners have been rewarded for the excellence of their composite innovations. The JEC Innovation Awards reward composites champions, based on criteria such as partner involvement in the value chain, technicality or commercial applications of innovations.

3D PRINTING, A NEW CATEGORY IN 2019
In 2019, 30 finalists have been selected by an international jury of experts from more than a hundred applications. They compete in 10 categories, among which the new 3D printing one. "The JEC Innovation Awards program is emblematic and recognizes pioneers in composite innovation. 3D printing plays a new role in our industry. The combination of lightweight, resistant materials that allow great design freedom, with a technology that allows complex shapes, is of interest to manufacturers. Many manufacturers have started using it to print automotive parts, aircraft parts, or building walls”, analyses Franck GLOWACZ, Innovation Content Leader at JEC Group. “Due to the very high level of the nominees, the JEC Innovation Awards ceremony should be very rich! ”

• Performance Days - November 28 and 29, 2018 – Hall C1 Booth B18
• Two of TINTEX’s fabrics have made it into the PERFORMANCE FORUM Jury’s Pick Category that represents fabrics which are a valuable contribution to this season Performance Days Focus Topic “WATER – OUR RESPONSIBILITY”

See, touch and experience the latest collection from TINTEX as they reveal a wonderful range of innovative fabrics that redefine fashion, inspire creativity, spark emotion and optimize responsible solutions. TINTEX, being an ingenious leader in textile and research innovation for over twenty years, transforms a new generation of cotton and other natural based materials. Established in the Porto region as authorities in superior dyeing and finishing techniques making TINTEX Textiles the perfect choice for fashion.

All the recent awards bestowed, demonstrate TINTEX continue research and commitment. They have been awarded for the Best product of the Base Layer Category by ISPO jury, moreover they have just received the prestigious German Design Awards 2019 and last but not least, they are selected as finalists for the Future Textile Awards in the category Best Innovation for Sustainable Textiles.
TINTEX continues to lead the way, as they proudly take part in the Make Fashion Circular initiative, by the Ellen MacArthur Foundation and activate change industry wide. This initiative aims to collaborate and innovate towards a new textile economy based on the principles of a Circular Economy.

In addition, since this November, TINTEX is a bluesign® system partner, thus means that they are responsibly acting parties of the textile value chain committed to applying the bluesign® system, continuously improving their environmental performance and always been focused on a sustainable future.

A milestone for TINTEX and fashion, as they launch Naturally Clean - an exceptional smart finishing process that is uniquely responsible. Naturally Clean enhances the natural beauty of cotton, takes a cost effective modern approach to eliminate aggressive treatments and optimizes clean surfaces, vivid colors, providing an exquisitely smooth handfeel. Naturally Clean achieves this by using Novozymes technology, a company that is indeed the world leader in biological solutions. Second, using textile chemicals with the lowest possible environmental impact, without compromising performance, from Beyond Surface Technologies AG. Naturally Clean maintains the original characteristics for an extended period of time. All materials are Oeko-Tex and soon bluesign® certified, thus eliminating harmful substances.
TINTEX’ Autumn/Winter 2019/2020 collection includes vibrant tones, refreshing turquoise and electric green, light and warm copper with chocolate browns that connect the natural and spiritual in an extra-sensorial universe. Infused with a stunning palette of nostalgic and multicultural colors - warm yellow with darkened reds, dynamic purple with urban greys - that express globalization and human connection.
Key smart ingredients of the season are:

• A New Generation of Cotton: GOTS certified organic cotton, Supima® cotton, and ECOTEC® by Marchi & Fildi the smart cotton that saves up to 77.9% water consumption and introduces the concept of a circular economy.
• SeaCell™ and Smartcel™: produced using the Lyocell process in a closed loop with no chemicals released as waste. The patented process of SeaCell™ allows that the positive properties of the seaweed are permanently preserved within the fiber, even after multiple washing cycles. Smartcel™ includes the essential trace element zinc providing anti-inflammatory capabilities.
• REFIBRA™ by Lenzing technology involves upcycling a substantial proportion of cotton scraps e.g. from garment production, in addition to wood pulp, where the raw material is transformed to produce new TENCEL™ Lyocell fiber to make fabrics and garments.
• Bemberg™ by Asahi Kasei: A new generation GRS Certified material, made from cotton linters, with a biodegradability certification by Innovhub. A matchless, high tech natural material, with a special handfeel and aesthetics.
• ROICA™ by Asahi Kasei
  - ROICA™ EF has a percentage of pre-consumer recycled content that is more than 50%, and thanks to this it has been GRS (Global Recycled Standard) certified.
  - ROICA™ V550 a premium stretch innovative yarn boasting the Cradle to Cradle Certified™ Gold Level for Material Health product and ingredients as it was evaluated throughout the supply chain for lower impacts on human and environmental health. Striving toward eliminating all toxic and unidentified chemicals for a safe continuous cycle. Hohenstein Environment Compatibility Certificate - ROICA™ proudly breaks down without releasing harmful substances.

Of special interest this season, the two TINTEX’s fabrics that made it into the PERFORMANCE FORUM Jury’s Pick Category for their contribution to this season Topic “WATER – OUR RESPONSIBILITY”.

A smart rib developed to reduce the water usage as most as possible, from cultivation of raw materials until fabric finishing. A blend of TENCEL™ Modal, cellulosic & biodegradable material treated with no hazardous chemicals, pesticides nor fertilizers, and European hemp, a fast-growing plant that requires very little water and no herbicides, pesticides, synthetic fertilizers or GMO seeds. Both fibres are biodegradable.

The second selected article is a 100% Merino Wool jersey made unique thanks to Colorau® by TINTEX, a patented natural dyeing process technique that uses vegetable herbs and extracts. A great amount of water was saved by avoiding subsequent washing steps. Also, lower water pollution is achieved by avoiding synthetic dyestuffs.

TRSA recently held its 105th Annual Conference & Exchange from Oct. 16-18 at The Meritage Resort & Spa in Napa, CA. Nearly 250 linen, uniform and facility services executives and guests gained insights from presentations on technology and family business, plus thought-provoking panel discussions and break-out sessions. They also participated in social events and in the recognition of industry leaders at the Annual Industry Awards Dinner.

Attendees raved about the program, which drew a net promoter score of 74 (anything above 50 is considered excellent). “TRSA's Annual Conference is an excellent opportunity to catch up with old friends, make new connections in the industry, celebrate those who have contributed to our industry and learn about new best practices,” said Jim Buik, president of the Roscoe Co., Chicago. Gerard van de Donk, managing director of ABS Laundry Business Solutions/LSI Inc., added that the conference offered attendees a prime opportunity for networking. “Every time it is valuable to meet and talk with the executives in our industry,” he said. “That is helping us to define our road map toward creating history together.”

The conference began with a keynote address by Vivek Wadhwa, a technology expert and columnist for The Washington Post and Bloomberg BusinessWeek. Wadhwa’s speech looked at technological innovations. Specifically, he examined how those advances are disrupting industries today and how they will continue to do going forward. From the outset, Wadhwa promised a stirring glimpse of what’s to come. “I’m going to take you on a tour of the future,” he said. “I’m going to tell you why this is the most amazing and scary time in human history.” He proceeded to do just that, elaborating on a range of topics from medical/genetic engineering breakthroughs to progress in robotics, water treatment, nanotechnology, energy and more. For example, he noted that the cost of solar energy is dropping exponentially. Within five years, he predicted that the costs for both solar technology and battery storage units will drop by 50% or more.

The Mechanical Engineering Industry Association (VDMA) has awarded two prizes to graduates of the Institut für Textiltechnik (ITA) of RWTH Aachen University - the dissertation prize and the creativity prize of the Walter Reiners Foundation of German Textile Machinery 2018. ITA alumnus Dr Benjamin Weise was awarded the dissertation prize for the development of novel fibres for textile charge storage devices. For their work on a guide to 4D product design, Jan Merlin Abram and Aalon Tal (both ITA students) were honoured with the creativity prize. The dissertation prize is endowed with €5,000 whilst the creativity prize contains a one-year scholarship of €250 per month. Peter D. Dornier, President of the Walter Reiners Foundation and Chairman of the Management Board of Lindauer DORNIER, presented the awards on the 18 September 2018 at the 18th Textile Machinery Forum in the Digital Capability Center in Aachen, Germany.

Graphene revolutionizes all-in-one - supercaps, reduction of terahertz radiation and antistatics

In his dissertation "Development of graphene-modified multifilament yarns for the production of textile charge storage devices", laureate Dr Benjamin Weise developed novel fibres made of polyamide and graphene and further processed them into textile surfaces. The newly developed polyamide graphene fibres are featuring a multitude of advantages:

• Due to their high performance in the charge storage area, they are predestined for use in double-layer capacitors, so-called super capacitors, or supercaps in short. Compared to lithium-ion batteries, supercaps offer significantly higher power density and a longer lifetime as no chemical reactions are taking place. towing to the graphene platelets in the filaments, it is now possible for the first time to integrate a charge storage device directly into a textile without having to sew in a rechargeable battery. This new fibre is therefore suitable for prospective use in smart textiles, for instance in a textile defibrillator.
• The new graphene-modified polyamide fibres can attenuate inident terahertz radiation up to 25 % of their original intensity. Terahertz radiation, for example, offers transmission rates of 100 Mbit/sec and is therefore of high interest for high-performance wireless communication. However, the radiation could damage sensible electronics as in aircrafts if this technology will be used widespread. Consequently, the shielding of the radiation is of high importance, e.g. in the form of fibre composite components in the aircraft, which protect the on-board electronics.
• As the fibres are showcasing a dissipative electrical conductivity, personal protective equipment is another prospective field of application.  

The development of a pilot process for graphene-modified fibres and the production of textile demonstrators are novel and disruptive attainments of Dr Weise’s PhD thesis and the reason for the award ceremony to him. Due to its outstanding properties, the European Union is funding research on graphene within the frame of the "Graphene Flagship" with an overall budget of one billion Euro (source: http://graphene-flagship.eu/project/Pages/About-Graphene-Flagship.aspx).

Modular product design of 4D products is now possible in simplified form

How can three-dimensional products change their shape over time and thus become "four-dimensional"? The students Jan Merlin Abram and Aalon Tal provide answers to this question in their project work "Leitfaden zur Auslegung hybrider morphender Textilien am Beispiel eines Scharniers" (Guidelines for the Design of Hybrid Morphing Textiles Using the Example of a Hinge), for which they were awarded the creativity prize. In their work, the students offer a guideline for the development of a four-dimensional textile from the idea to the demonstrator. Four-dimensional textiles, for example, consist of a hybrid material of elastic textile on which three-dimensional structures are printed. The fourth dimension describes the change in shape and/or a property over a defined period of time (= morphing).  This change is caused by external influences such as light and heat.

Every year, the Foundation of the German Textile Machinery awards prizes for the best dissertation, diploma or master's thesis and the creativity prize for the smartest student research project. Further prizes were awarded to Eric Otto, ITM Dresden, and Susanne Fischer, Reutlingen University.