From the Sector

Reset
6 results
Photo: ACIMIT
13.07.2022

Italian textile machinery sector returning to pre-Covid levels

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

  • Annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers

  • Digitalization and Sustainability Key to Resiliency for Italian Textile Machinery Sector

The objective critical issues faced by Italy as a whole throughout the course of 2021, primarily dictated by a pandemic that upset any and all pre-existing equilibriums, have not slowed or halted the Italian textile machinery sector.

Indeed, data presented during the annual assembly of ACIMIT, the Association of Italian Textile Machinery Manufacturers, held on 1 July proved decidedly positive, showing that in 2021 the sector recovered significantly compared to 2020, to the point of returning to pre-Covid levels.

Specifically, Italian textile machinery production amounted to 2.388 billion euros (+35% over 2020 and + 5% over 2019), with total exports amounting to 2.031 billion euros (+37% over 2020 and +9% over 2019).

However, these results do not cancel the obstacles that companies are still facing. Looking to the near future, expectations are for a rather uncertain outlook, as underscored by ACIMIT President Alessandro Zucchi: “2022 remains a year replete with unknown factors, starting with the Russian-Ukrainian conflict, along with the persistence of the pandemic, which seriously risk delaying expected growth consolidation for businesses in the sector. Difficulties in finding raw materials and components negatively affect the completion and fulfilment of orders processed as far back as 2021. To boot, rising energy costs and inflationary trends affecting numerous commodities are depressing overall business confidence. So the outlook for the sector is not so good.”
As such, the two cornerstones through which ACIMIT aims to support the Italian textile machinery sector are digitilization and sustainability.

4.0: The textile machinery sector looks to the future
The road to digital transformation has already led numerous manufacturers to completely rethink their production processes, rendering them more efficient and l ess expensive. The digital world is moving ahead at a decisive rate in the textile machinery sector, where the buzzwords are increasingly, for instance, the Internet of Things connecting to a company’s ecosystem, machine learning algorithms applied to production, predictive maintenance, and the integrated cloud management of various production departments. It is no coincidence that ACIMIT has focused decisively on its Digital Ready project, through which Italian textile machinery that adopt a common set of data are certified, with the aim of facilitating integration with the operating systems of client companies (ERP, MES, CRM, etc.).

A green soul
Combining production efficiency and respect for the environment: a challenge ACIMIT has made its own and which it promotes among its members through the Sustainable Technologies project. Launched by the association as early as 2011, the project highlights the commitment of Italian textile machinery manufacturers in the area of sustainability. At the heart of the project is the Green Label, a form of certification specifically for Italian textile machinery which highlights its energy and environmental performance. An all-Italian seal of approval developed in collaboration with RINA, an international certification body.
The assembly held on 1 July provided an opportunity to take stock of the Sustainable Technologies project, more specifically, with the presentation of the Rina Consulting survey on the Green Label’s evolution and impact in recent years.

The results have confirmed the initiative’s extreme validity. The technological advances implemented by the association’s machinery producers participating in the project have effectively translated into benefits in terms of environmental impact (reduction of CO2 equivalent emissions for machinery), as well as economic advantages for machinery users.

With reference to the year 2021, a total of 204,598 tons of CO2 emissions avoided on an annual basis have been quantified, thanks to the implementation of improvements on machinery. This is a truly significant reduction which, for the sake of comparison, corresponds to the carbon dioxide emissions generated by 36,864 automobiles travelling an average of 35,000 km a year. In terms of energy savings, the use of green labeled textile machinery has provided excellent performances in allowing for a reduction of up to 84% in consumption.

A round table discussion on the Green Label’s primary purpose
The environmental and economic impact generated in production processes for Italian textile machinery through the use of Green Label technologies was the focus of the round table which concluded the ACIMIT assembly.

Moderated by Aurora Magni (professor of the Industrial Systems Sustainability course at the LIUC School of Engineering), the debate involved Gianluca Brenna (Lipomo Printing House administrator and Vice President of the Italian Fashion System for Welfare), Pietro Pin (Benetton Group consultant and President of UNI for the textile-clothing area), Giorgio Ravasio (Italy Country Manager for Vivienne Westwood), as well as ACIMIT President Alessandro Zucchi.

Called on to compare common factors in their experiences relating to environmental transition processes for their respective companies, the participants were unanimous: the future of Italian textile machinery can no longer ignore advanced technology developments capable of offering sustainable solutions with a low environmental impact while also reducing production costs. This philosophy has by now been consolidated, and has proven to lead directly to a circular economy outlook.

The upcoming ITMA 2023 exhibition
Lastly, a word on ITMA 2023, the most important international exhibition for textile machinery, to be held in Italy from 8 to 14 June 2023 at Fiera-Milano Rho. Marking the 19th edition of ITMA, this trade fair is an essential event for the entire industry worldwide, providing a global showcase for numerous innovative operational solutions on display. A marketplace that offers participants extraordinary business opportunities. The participation of Italian companies is managed by ACIMIT.

Photo: SGL Carbon
05.05.2022

SGL Carbon: Dynamic business development in Q1 2022 continued

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

  • Low impact of Ukraine war on business performance in 1st quarter
  • 12.2% increase in sales to €270.9 million based on growth in all four business units
  • Adjusted EBITDA improves by 11.5% to €36.8 million

SGL Carbon generated consolidated sales of €270.9 million in Q1 2022 (Q1 2021: €241.5 million). This corresponds to an increase of €29.4 million or 12.2% compared to the same period of the prior year. All four business units contributed to the pleasing increase in sales. In parallel, adjusted EBITDA improved by 11.5% to €36.8 million in the reporting period.

Sales development
In the first three months of fiscal 2022, the sales increase of €29.4 million was driven by all four operating business units: Graphite Solutions (+€11.3 million), Carbon Fibers (+€6.6 million), Composite Solutions (+€7.2 million) and Process Technology (+€6.0 million).
In particular, sales to customers in the automotive and semiconductor industries and a significant recovery in the industrial applications segment were key factors in the increase in sales. Sales of the Process Technology business unit to customers in the chemical industry also developed pleasingly. The effects of the war in Ukraine, which has been ongoing since the end of February 2022, had only a little impact on SGL Carbon's sales performance in the 1st quarter.

Earnings development
Despite the increasingly difficult market environment in the course of Q1 2022, associated with temporary supply and production bottlenecks at their customers, temporarily interrupted transport routes, and significantly higher energy prices, SGL Carbon was able to keep the adjusted EBITDA margin almost stable year-on-year at 13.6%.  
Adjusted EBITDA increased by 11.5% to €36.8 million in the reporting period. Higher capacity utilization in the business units and product mix effects contributed to the improvement in earnings, together with the cost savings achieved as a result of the transformation. By contrast, higher raw material, energy and logistics costs as of end of February 2022 had a negative impact on earnings. The Carbon Fibers business unit was particularly affected by the energy price increases. One-time expenses of €9.2 million in conjunction with energy transactions burdened the Carbon Fibers business unit in the 1st quarter of 2022.  
To secure our production and delivery capabilities, around 85% of the energy requirements of the entire SGL Carbon for 2022 are price-hedged.
Adjusted EBITDA and EBIT do not include in total positive one-time effects and special items of €8.5 million, among other things from the termination of a heritable building right to a site no longer in use. Taking into account the one-time effects and special items presented as well as depreciation and amortization of €14.1 million, reported EBIT increased by 83.5% to €31.2 million (Q1 2021: €17.0 million). The net profit for the period developed correspondingly and more than tripled from €6.1 million to €21.4 million in a quarter-on-quarter comparison.

Outlook
The sales and earnings figures for the 1st quarter 2022 confirm the stable demand from different market segments. Price increases and volatility in the availability of raw materials, transportation services and energy were largely offset by savings from the transformation program and pricing initiatives at the customers.
For 2022, SGL Carbon continues to expect volatile raw material and energy prices, which were included in their forecast for 2022 at the time of planning. However, there are uncertainties about the extent and duration to which SGL Carbon and the customers will be affected by the impact of the war in Ukraine or temporary supply chain disruptions due to the lockdowns in China. Therefore, SGL Carbon's outlook for fiscal 2022 does not include supply and/or production interruptions at customers or the impact of a possible energy embargo that cannot be estimated at this time.  
SGL Carbon's forecast also implies that factor cost increases can be at least partially passed on to the customers through pricing initiatives. SGL Carbon has also included the revenue and earnings impact from the expiry of a supply contract with a major automobile manufacturer at the end of June 2022 in our forecast.

Source:

SGL Carbon

DITF: SMART TEXTILES erstmals digital (c) DITF
Forschung an Handschuhen mit Drucksensoren für Logistik und Produktion.
31.03.2021

DITF: SMART TEXTILES erstmals digital

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Über den Anwendungsbereich Mobilität hinaus gibt es vor allem in Medizin und Pflege Bedarf an intelligenten Textilien. Sensorische Sohlen in den Schuhen analysieren den Gang und helfen damit Ärzten und Physiotherapeuten, die optimale Therapie auszuwählen - zum Beispiel gegen Rückenschmerzen. Taschentücher, Stofftaschen oder Handschuhe aus speziellen Silbertextilien töten Viren und Bakterien. Eine Innovation, die in der Corona-Pandemie besonders gefragt ist.

Neue Textilelektroden überleben inzwischen sogar viele
Waschgänge und machen smarte Textilien alltagstauglich. Das ist besonders wichtig bei Sportbekleidung, mit der auch Hobbysportler gerne ihr Training tracken, auswerten und optimieren. Neu entwickelte Stoffe haften großflächig am Körper und stellen auf diese Weise sicher, dass Vitalparameter zuverlässig erfasst werden.

Waschbar und leitfähig sind auch Druckknöpfe, die im wahrsten Sinne des Wortes Kontaktierung per Knopfdruck herstellen. In den robusten Knöpfen steckt Elektronik wie Sensoren, Aktoren, LEDs und Schalter.

Das Anwenderforum zeigte auch in diesem Jahr, dass viele Visionen inzwischen realisierbar und marktfähig sind. Herausforderungen sind in Zukunft, nachhaltige Materialien und Prozesse einzusetzen sowie die E-Textiles zu recyceln. Darüber hinaus stellt die Datenflut, die durch die smarten Textilien erzeugt werden kann, hohe Ansprüche an die Sicherheit und die Verarbeitung der Daten.

Das Anwenderforum SMART TEXTILES wird jährlich von den Deutschen Instituten für Textil- und Faserforschung Denkendorf (DITF), dem Forschungskuratorium Textil e. V. in Berlin und dem Textilforschungsinstitut Thüringen Vogtland e. V. (TITV) in Greiz veranstaltet, um den Austausch von Industrie und Wissenschaft in der in der D-A-CH-Region zu fördern.

Das 10. Anwenderforum SMART TEXTILES findet vom 2.-3. März 2022 statt und ist wieder als Präsenzveranstaltung kombiniert mit einer Firmenbesichtigung geplant. Der Veranstaltungsort wird rechtzeitig bekanntgegeben.

Source:

DITF

25.03.2021

Autoneum Holding AG Annual General Meeting

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

  • Waiver of dividend
  • Expansion of Board of Directors

The shareholders of Autoneum Holding Ltd approved all proposals of the Board of Directors at today’s Annual General Meeting and agreed to forgo dividend payments. Liane Hirner and Oliver Streuli were newly elected to the Board of Directors. Based on Art. 27 of the Covid-19 Ordinance 3, the Board of Directors of Autoneum Holding Ltd decided to hold the 2021 Annual General Meeting without physical attendance by the shareholders. For this reason, the Company had asked them in advance to exercise their rights exclusively via the Independent Proxy. He represented 63.5% of a total of 4 672 363 shares.

The shareholders approved the Annual Report, the Annual Financial Statements and the Consolidated Financial Statements 2020. In view of the net loss in the 2020 financial year, the Board of Directors proposed forgoing dividend payments, which was approved by a large majority of the shareholders. Hans-Peter Schwald, Chairman of the Board of Directors, said: “2020 was extremely challenging for the entire automobile industry and also for Autoneum. The pandemic-related drop in revenue has impacted profitability. Despite the net loss, Autoneum reached important financial improvements in 2020. We expect to return to profitability in 2021 and our aim to distribute at least 30% of the net profit attributable to Autoneum shareholders as dividends remains unchanged. The Board of Directors, the Group Executive Board and the Company as a whole are committed fully to ensuring that Autoneum continues to make significant operational and financial improvements.”

Chairman Hans-Peter Schwald and the other members of the Board of Directors, Rainer Schmückle, Norbert Indlekofer, Michael Pieper, This E. Schneider and Ferdinand Stutz were confirmed in office. Newly elected to the Board of Directors were Liane Hirner and Oliver Streuli.

With Liane Hirner and Oliver Streuli and the resignation of Peter Spuhler, who did not stand for reelection in order to be able to focus on managing Stadler Rail, the Board of Directors of Autoneum Holding Ltd has expanded from seven to eight members. Hans-Peter Schwald explained: “The expertise of Liane Hirner and Oliver Streuli in the areas of finance and corporate management is of great value to Autoneum. As the Board of Directors, we look forward to this enhancement to the Board and to working with both of them.”

Peter Spuhler has been an important driving force since the Company became independent, he played a major role in shaping Autoneum thanks to his entrepreneurial expertise and showed great commitment to the Company. The Board of Directors thanks him sincerely and wishes him continued success.

This E. Schneider, Hans-Peter Schwald and Ferdinand Stutz were re-elected to the Compensation Committee. Oliver Streuli was elected as a new member of this committee. In addition, the shareholders of Autoneum Holding Ltd granted discharge to all members of the Board of Directors and the Group Executive Board with a large majority.

The consultative vote on the 2020 remuneration report was approved by 83.4%. Due to the severe impact of the coronavirus pandemic on the Group’s business development, the members of the Board of Directors renounced half of their compensation for the 2020 financial year and, in order to  align their remuneration with shareholder interests, decided to receive it entirely in Autoneum shares. In addition, a waiver of salary amounting to 10% of the basic salary for a period of three months was agreed upon with the senior management as part of a reduction of personnel costs.

The proposals for the remuneration of the Board of Directors and the Group Executive Board for the 2022 financial year as well as the other proposals were also approved by a large majority.

Source:

Autoneum Management AG

26.11.2020

Autoneum: Current assessment of the 2020 financial year

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

Source:

Autoneum Management AG

28.07.2020

Autoneum: Corona-related slump in revenue – bottom point overcome

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

The coronavirus pandemic and its massive impact on the automotive industry led to an un-precedented market slump in the first half of 2020 and a corresponding revenue decline at Autoneum. Revenue in local currencies fell by –32.7% compared to the prior-year period, and in Swiss francs by –36.8% to CHF 730.6 million. The turnaround program for the North American sites made further progress in the first six months and is showing the targeted results. However, they were clearly overcompensated by the massive impact of the corona-virus crisis, which led to a negative net result of CHF –54.9 million despite comprehensive cost flexibilization measures.

Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production completely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.


 Like the entire automobile industry, Autoneum was massively impacted by the effects of the corona-virus pandemic in the first half of the year. The temporary plant closures at almost all customers in every region, especially in the second quarter of the year, not only led to an unprecedented market collapse, but also to a production stop at all 55 Autoneum sites. Starting in February in China and one month later in all other regions, vehicle manufacturers temporarily shut down production com-pletely. The corresponding massive drop in global vehicle production led to a slump in revenue at Autoneum of –32.7% in local currencies. This reflects the development of the market in the first half of 2020, which contracted by –33.2% year-on-year. Revenue in Swiss francs at Autoneum fell by –36.8% to CHF 730.6 million (prior-year period: CHF 1 156.1 million). Revenue development in all Business Groups outperformed the respective markets, particularly in Asia and the SAMEA (South America, Middle East and Africa) region.

Autoneum promptly responded to the pandemic-related market slump by adopting extensive cost-cutting measures in all regions. These include the reduction of employee costs by, among other things, adjusting time accounts, introducing short-time work at eligible locations and temporary layoffs as well as headcount reduction, mainly among temporary workers. In addition, operating expenditures were limited to the absolutely necessary. The investment volume for 2020, already reduced from previous years, was downsized even further. Autoneum continues to benefit in this regard from the high level of investments undertaken in recent years.

 Although the coronavirus crisis and the measures taken to contain it dominated Autoneum’s course of business in the first half of 2020, the Company achieved necessary operational and financial im-provements during this period. The comprehensive turnaround program for the North American sites made further progress and is on track. Efficiency improvements already achieved there had a posi-tive effect on the figures of the first half-year, but were significantly overcompensated by the substan-tial impact of the COVID-19 crisis. Savings and cost flexibilization measures taken immediately and implemented worldwide in view of the revenue loss could not offset the ongoing, capacity-related fixed costs. This led at the Group level to a negative EBIT of CHF –31.8 million (prior-year period: CHF 16.4 million), which equates to an EBIT margin of –4.4% (prior-year period: 1.4%). The net result decreased because of the severe revenue shortfall to CHF –54.9 million (prior-year period: CHF –6.0 million).

Outlook
For 2020 Autoneum expects revenue to develop at market level. Although customers’ production volumes should increase again in the second half of 2020 compared with the first semester, latest fore-casts indicate that they will remain clearly below the level of the second half of 2019. Immediately implemented and ongoing cost reduction measures as well as further operational optimizations also within the turnaround program in North America will lead to improvements in the second half of the year. Due to the current uncertainties, a reliable statement on the net result for the full year 2020 thus cannot be made. With regard to the mid-term targets, a recovery of the profitability level is expected, but it will largely depend on the market development.

Source:

Autoneum Management AG