From the Sector

Reset
7 results
(c) Swissmem
14.02.2022

Swiss textile machinery going digital: Innovative technology for new business models

Digitalization is a big story in the world of business. It’s all about change, making use of technology to transform attitudes and create new opportunities to grow revenue. At its heart is innovation, with new systems and intelligent use of data. In textiles, the entire value chain is going digital, as evidenced by the commitment of Swiss Textile Machinery Association member firms. Their story – presented here in six ‘chapters’ – spans industry sectors through spinning, weaving, finishing and nonwovens.

Digitalization is a big story in the world of business. It’s all about change, making use of technology to transform attitudes and create new opportunities to grow revenue. At its heart is innovation, with new systems and intelligent use of data. In textiles, the entire value chain is going digital, as evidenced by the commitment of Swiss Textile Machinery Association member firms. Their story – presented here in six ‘chapters’ – spans industry sectors through spinning, weaving, finishing and nonwovens.

Cost savings and more
The process of digitalization in the textile industry today is continuous – faster in some segments than others – but noticeable everywhere. Automation is promising in many areas of finishing and making-up, where initial investments are being made. An example is folding of finished goods, previously a slow manual operation. Now, high-performance automatic folding machines from Swiss company Espritech deliver the potential for cost savings, unlocking new options for positive change at this most labor-intensive stage of production. For manufacturers in low-cost areas, the benefit results from its volume and is a simple financial one. In higher-cost segments, the application of this technology can be part of a completely new business model, taking production closer to the end customer.

Better process, better workplace
Pioneering in the field of digitalization embraces social responsibility along with the introduction of bold new technological innovation. That’s a commitment made by Uster, as it aims to shape future working practices in the textile industry in areas where its systems are applied. In fabric inspection, that means combining the strengths of human capabilities with the performance of Artificial Intelligence. Automatic defect classification with machine learning technology is the next leap in digitalization for fabric manufacturers, following on from automated detection of fabric faults, which is already well established in weaving and finishing mills. This will bring benefits in profitability for the manufacturer – as well as an improved working environment for their operatives, freed from repetitive tasks.

Information, flexible and fast
Access to data is critical in the digitalized world of textiles. It must be flexible, fast and secure, and available to all levels of the company – worldwide. Jakob Muller serves the narrow fabrics industry ideally with a digitalization portal, perfectly developed to provide essential production information. The portal is a browser-based production data acquisition system, with direct access to the machine controls. The system offers unique data monitoring and communication on a global framework. Digitized weave rooms present information 24/7 on desktops at the customer’s plant, as well as on tablets and smartphones remotely.

Making the most of it
Rieter takes advantage of latest digital technology to offer customers a unique experience. Their digital spinning suite helps spinners overcome their daily challenges and manage costs and efficiency more effectively. This all-in-one mill management system connects all the machinery, giving quick access to the right information and a holistic view, from bale to yarn. Users profit from full transparency, and are presented with recommendations based on long-standing experience and know-how. This is digitalization at its most practical, applied to allow spinners to make the most of their installed machinery.

Production, service, training – digital everything
As a solutions provider, Saurer puts digitalization at the core of business, integral to its technology offering to customers. Some latest examples include self-optimization of spinning machines, and a fully automated transport of cylindrical or conical cross-wound packages. These are automatically stored in an internal buffer system, for later feeding to subsequent processes. Of course after-sales service is also digital: the e-shop and machine information hub, together with the web-based training centre, ensure that knowledge is transferred to customers – turning employees into experts.

See the future system today
Autefa Solutions uses the concept of digital twinning, visualizing any real-world concept of a nonwovens line to make it easier for potential customers to grasp the idea. It’s also a big help for training and servicing needs. Most of all they digitalize important parts e.g. of a baling press line with perfectly interconnecting software tools. This is an excellent method for reducing commissioning times. Ordered bale presses reach technical readiness in the form of a digital twin, before they are commissioned in the real world. This typically halves the total time to get the line up and running.
Speaking on behalf of Swiss Textile Machinery Association members, André Imhof, CEO of Autefa Solutions Switzerland AG, says: “Making digitalization our friend opens doors for business model innovations, which is essential for our industry competitiveness. The approach is to digitalize everything that can be digitalized. We won’t stop.”

More information:
Swissmem digital Swiss companies
Source:

Swissmem

(c) Messe Frankfurt, deepak@deepakdavda.com
13.12.2021

Techtextil India: First post-lockdown edition with overwhelming responsive from industry

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

The event received an overwhelming response, reflecting industry’s keen interest to explore new developments and opportunities in technical textiles. In regards to the same, Mr Abhijit Kulkarni, President – Textile Engineering Group, A.T.E. India, stated: “It was the first and best physical show also on hybrid mode filled with enthusiastic buyers and customers who visited our booth and had very fruitful discussions with us. Several leading textile manufacturers visited our stalls, including: Strata Geosystems India, SKAPS Industries, Reliance Composites, Paramount Textiles, and Welspun, to name a few.”

Alok Masterbatches Pvt Ltd, Khosla Profile Pvt Ltd, ATE Group, Lucky International, Meera Industries Limited, Park Non-Woven Pvt Ltd, Sarex Chemicals, SICAM, Suntech Geotextile Pvt Ltd and Weavetech Engineers, were among the leading Indian companies exhibiting at the show.

The significance of the three-day fair was further elevated by the German pavilion. Technical textile manufacturers from Germany, such as Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co, displayed their latest technologies on the show floor, which garnered significant attention from the Indian buyers.

The first Digital Symposium was another highlight of Techtextil India 2021. The forum delved into a series of crucial topics in technical textiles discussing PLI schemes, FDI opportunities and policies, investment opportunities in Tamil Nadu, & New Investment Opportunities, Sustainable Technical Textiles and Global sustainable approach for Textiles with Antimicrobial Performance.

Concluding on a successful note, Techtextil India 2021 emerged as a platform of new beginnings for the technical textiles sector and for businesses trying to retain their shape and seeking momentum after the tough pandemic phase.

Source:

Messe Frankfurt HK

Photo: Messe Frankfurt
08.11.2021

Techtextil India: Hybrid exhibition in November

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

The conjunction between the physical exhibition and the online business matchmaking platform will make way to a wider range of networking. Local and international visitors who are unable to attend the venue will be able to witness the exhibition virtually through the ‘MFI virtual app’ which will host live knowledge sessions and product demonstrations for visitors. The two-day multimodal trade fair allows the visitors to search for specific products like fibers, yarns, nonwovens, machinery, coated textiles with easy-to-use filters further to which they can share their query or connect directly with the respective exhibitors.

At the same time, visitors attending the venue will be welcomed under a well-organised physical exhibition following the government-authorised safety protocols of ‘MFI SafeConnect’. These protocols will enable visitors to engage in secure face-to-face interactions with exhibitors and witness the latest technical textile technologies and innovations in-person.

Alliance with the Government of Tamil Nadu
In a bid to strengthen indigenous production through the state and attract investors, the nodal agency for investment promotion and facilitation for the Government of Tamil Nadu – Guidance has signed up for Techtextil India 2021. Furthermore, technical textile players from Tamil Nadu such as Cyber Textiles India Pvt Ltd, Jayashree Spun Bond, Lenzing Ag India, Liester Technologies, Loyal Textile Mills Ltd, Milltex Engineers Pvt Ltd, Superfil Products Pvt Ltd, Uster Technologies (India) Pvt Ltd have also confirmed their participation for the exhibition.
Announcing a close co-operation with Messe Frankfurt India for the 2021 edition, Ms Pooja Kulkarni, IAS MD & CEO, Guidance Tamil Nadu, stated: “While there are several inherent advantages for the growth of technical textiles in Tamil Nadu specifically, many raw materials used in the production of sanitary products, artificial ligaments, seat belt webbings, airbags are still heavily imported. In this context, the alliance with Techtextil India Forum can help us reduce import dependency and bring investments in R&D, manufacturing, innovation by partnering with global technical textiles companies.”

With 50% of India’s textile mills in Tamil Nadu and complementary clusters of knitting, weaving and medical devices manufacturing in Coimbatore, and Tiruppur, the region provides immense opportunities for Meditech investments. Two petrochemical and refinery units – One in Cuddalore and another in Nagapattinam by CPCL is in the process of being established in Tamil Nadu. These units will enable availability of MMF raw material for the textile industry across the state. Hence, manufacturing in Tamil Nadu can be a win-win arrangement for investors as India provides access to the burgeoning market as well.

International expertise with German pavilion
Techtexil India 2021 edition will feature an exclusive German Pavilion showcasing products and technologies from top German manufacturers, including Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co.

Source:

Messe Frankfurt (HK) Ltd

(c) Autefa
25.08.2021

Swiss Textile Machinery: Top Technology for Nonwovens

Originally conceived as a low-cost, high-volume alternative to knitting and weaving, nonwovens was already expanding its market boundaries by the 1970s with new applications in ‘disposables’ such as diapers, hygiene and teabags.

In the past five decades, the nonwovens business has exploded in all directions, reaching a global market worth USD 40.5 billion in 2020, projected to grow to USD 53.5 billion by 2025. This annual growth rate of 5.7% (MarketsandMarkets, Nonwoven Fabric Market Report) is based on countless new applications and expansion into durable, as well as additional disposable, products.

Major growth drivers include the hygiene sector, and filtration media for power plants and air conditioning systems. Especially during the peak of the COVID pandemic in 2020 and 2021, demand in the hygiene sector multiplied. Worldwide capacities for both meltblown and spunlace production rocketed compared to a normal business year. Swiss Autefa Solutions, for example, significantly benefited from this trend, notably with the launch of a fully-automatic machine for producing face masks.

Originally conceived as a low-cost, high-volume alternative to knitting and weaving, nonwovens was already expanding its market boundaries by the 1970s with new applications in ‘disposables’ such as diapers, hygiene and teabags.

In the past five decades, the nonwovens business has exploded in all directions, reaching a global market worth USD 40.5 billion in 2020, projected to grow to USD 53.5 billion by 2025. This annual growth rate of 5.7% (MarketsandMarkets, Nonwoven Fabric Market Report) is based on countless new applications and expansion into durable, as well as additional disposable, products.

Major growth drivers include the hygiene sector, and filtration media for power plants and air conditioning systems. Especially during the peak of the COVID pandemic in 2020 and 2021, demand in the hygiene sector multiplied. Worldwide capacities for both meltblown and spunlace production rocketed compared to a normal business year. Swiss Autefa Solutions, for example, significantly benefited from this trend, notably with the launch of a fully-automatic machine for producing face masks.

The automotive industry is the second big growth area, with many new applications being pioneered. The trend to electric and hybrid vehicles has helped this, as nonwovens reinforced with carbon fibres are widely used as battery housings.

Swiss nonwovens competence
Innovative applications across all sectors have driven the rapid evolution of sophisticated nonwovens machinery. Today’s trends demand higher productivity, sustainability and Industry 4.0 compatibility – demonstrated by the full equipment portfolio of Swiss Textile Machinery member Autefa Solutions. With V-Jet Futura, the company recently sealed the link in its product range between web forming and drying technology. This latest Hydroentanglement Machine, together with the SQ-V Square Drum Dryer, embodies advanced technology combined with significant reductions in energy consumption compared to other process solutions.

A vital contribution to nonwovens production is offered by Rieter subsidiary Graf, a leading supplier of clothing and combs for carding and combing processes in spinning and nonwovens. Graf's Hipro card clothings – suitable for any man-made fibres in the nonwovens sector – are focussing on higher productivity. Their superior performance delivers up to 10% higher throughput and greater carding efficiency compared to conventional clothings. These reliable card clothing elements also ensure a consistently reproducible high web quality, as well as 20% fewer failures in the web, thanks to the precise fibre transfer to and from the cylinder.

Another constant trend in nonwovens today is the drive for better quality. Manufacturers want to take charge of contamination levels in their processes, as well as eradicating defects which may arise during production. Uster Technologies, a leading provider of quality management solutions from fibre to fabric, offers a combined solution to achieve both these required quality standards. At the fibre preparation stage, Uster Jossi Vision Shield N ensures the best possible initial inspection and removal of contamination. Then, at the end of the production sequence, Uster EVS Fabriq Vision N handles automated detection and marking of all the main defects caused during production. This combined solution avoids material waste and takes full advantage of the potential for process optimization.

Source:

Swiss Textile Machinery Association

Belgium, Czech Republic, Germany and Taiwan Pavilions to join Cinte Techtextil China (c) Messe Frankfurt (HK) Ltd
15.08.2018

Belgium, Czech Republic, Germany and Taiwan Pavilions to join Cinte Techtextil China

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

Fresh innovation from the Taiwan Pavilion
The Taiwan Pavilion lives up to its reputation as one of the leading sources of industry innovation. Ten exhibitors in the Taiwan Pavilion will showcase a variety of innovations ideal for a number of industries. With advances in medical and hygiene product technologies, exhibitors Web-Pro Corporation will offer protective cover-all materials that resist pathogens and micro-organisms and multi-layered PE films for hygiene products, while Kae Hwa Industrial will introduce their developments in materials that protect against viruses. Four Elements Energy Biotechnology will showcase their multi-functional Masterbatch product, a unique FDA-qualified, anti-mildew and transparent plastic additive that repels bacteria.

Other exhibitors to watch out for in the Taiwan Pavilion include Ritex Machinery, who will display their Air Through machinery which can be applied to nonwoven fabrics for hygienic, medical and filtration uses. Everlight Chemical Industrial’s Evereco® adhesives introduce an eco-friendly solution with heat-resistance and other resilient properties. Also offering eco-friendly alternatives is TomLong Techstile and their TPU coated fabrics, ideal for waterproof and inflatable products.

Productivity and efficiency at the German Pavilion
Following high demand in the Chinese market, the German Pavilion returns with around 30 exhibitors, showcasing their expertise in efficiency in textile production. Highlights include Baumüller Nürnberg’s modular concepts and intelligent automations which allow flexible reactions to changeable market requirements. Edelmann Technology brings new high speed winder systems for increased production rates and new concepts for reducing contamination in products. ISRA Surface Vision will present 100% inline optical surface inspection methods for quality control and process optimisations. Another product to watch out for is Kufner’s xShield®, a lightweight, soft textile with 99% shielding efficiency against electromagnetic radiation.

Other big names in the German Pavilion include Autefa Solutions, Brückner Textile Technologies, Dornier Lindauer, IBENA, J.H. Ziegler, Kufner, Perlon and more.

Belgium Pavilion returns along with a Czech Republic debut
Organised by Fedustria (Belgian Textile, Woodworking and Furniture Industry Federation), the Belgium Pavilion will include textile recycling company Belrey Fibres, engineered fabrics by Pennel & Flipo for marine and rescue industries, as well as leading coating specialists Vetex who will feature a variety of functional tapes, and R&D institute Centexbel who carry out research projects across the entire textile and polymer production chain.

The new Czech Republic Pavilion organised by ATOK, the Association of Textile-Clothing–Leather Industry, will showcase three exhibitors who will provide solutions for technical yarn, fabric processing and nonwoven fabrics. These include: GF Machinery, showcasing R&D and production of special machines and lines for glass / basalt yarn and fabric processing; Retex’s nonwoven needle-punched and air laid textiles; and STAP, Europe’s biggest manufacturer of narrow fabrics.

The Cinte Techtextil China fair is recognised by European manufacturers as a gateway to the Asian market. With investment from China boosting the technical textile industry, and more Asian countries than ever developing their technical markets, Cinte Techtextil China 2018 is set to be a hub of business potential.

 

 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

16.07.2018

Leading nonwovens & weaving machinery brands sign up for Cinte Techtextil China

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Asia’s largest biennial event for the entire technical textiles and nonwovens sector will feature some of the industry’s biggest overseas machinery brands. Held on the earlier date of 4 – 6 September this year, the fair will feature an expected 500-plus total exhibitors from around 20 countries & regions.

As the world’s largest producer of technical textiles and nonwovens, China’s demand for production machinery is insatiable. As such, this September’s Cinte Techtextil China has attracted some of the world’s leading machinery brands, particularly in the nonwovens and sewing machinery sectors, ensuring a wide range of sourcing options for both domestic and international buyers.

Overseas producers respond to strong Chinese demand
As the Chinese domestic and export markets’ demand for quality technical textiles and nonwovens products continues to increase, overseas machinery brands continue to enter the country, using Cinte Techtextil China as their starting-out platform. ANDRITZ Nonwoven is just one of those who see the growing potential. “Chinese nonwovens manufacturers are increasingly requiring higher capacities and top-class quality for their nonwovens products for local and export markets,” Mr Laurent Jallat explained. “China is the biggest market in terms of installed capacity, and shows quite promising potential for the future. In the past years, we’ve seen rapid growth in products such as disposable face masks.” ANDRITZ responds to this demand with their neXline spunlace eXcelle line which features state-of-the-art TT card web forming and JetlaceEssentiel hydro entanglement units for high capacity and speed.

The DiloGroup also report an increase in demand for their products in China. “China is one of our biggest markets,” explains Mr Dominik Foshag. “We have procured huge orders from China, as Chinese customers are considering German technology more frequently nowadays. The visitor quality of Cinte Techtextil has been very good in this past, and we think this year’s fair will be also successful as we know many of our customers are going to visit.”

Oerlikon will introduce its spunbond technology to the Chinese market this year, and is expecting to conclude initial contracts at the fair due to increased demand for overseas products. “The Chinese market for nonwovens products is by far the largest and fastest growing national market. Chinese manufacturers are no longer satisfied with lower product quality, but want to exceed Western quality levels, for example. The products must now meet stricter customer requirements and legal standards, some of which are significantly higher than other international standards,” Ms Lena Kachelmaier said.

Truetzschler Nonwovens has also noticed this trend. Ms Jutta Stehr commented: “In the last two or three years, China became one of the pacemakers in the field of nonwovens used in beauty, skin care and hygiene applications. Asian markets have set new standards concerning quality in nonwovens. For instance, making disposable wipes from cotton fibres is a trend originating in Asia. The luxurious feeling of cotton combined with the requirement for eco-friendly products will further drive demand in China and elsewhere. Accordingly, Truetzschler Nonwovens anticipates more inquiries at Cinte Techtextil for its proven carding and spunlacing solutions for cotton nonwovens.”

Weaving machine supplier Itema has also noticed strong demand in China for products made in Italy. “Generally speaking, and especially for technical fabrics, imported machinery is highly evaluated and appreciated by Chinese customers. In recent years, Itema experienced significant growth in the sale of its Made-in-Italy weaving machines in China, and in other APAC countries. Imported machines are synonymous with quality and reliability, and we believe this positive trend will be constant in the future,” Mr Matteo De Micheli outlined.

Weaving machinery exhibitor highlights

  • ANDRITZ Nonwoven: their specialty is technologies for drylaid, wetlaid, spunbond, spunlace, needlepunch and textile calendering. At Cinte Techtextil, they will highlight their aXcess product portfolio, which has been especially designed for medium-capacity production. ANDRITZ has developed this range to fit the demands of producers with medium-capacity requirements, particularly in emerging markets. It includes lines and individual machines for needlepunch, spunlace, wetlaid and calendering processes.
  • Autefa Solutions: visitors to their booth will experience the company’s expertise as a full line supplier for carded- crosslapped needlepunch lines, aerodynamic web forming technology, spunlace and thermobonding lines. Their nonwovens lines meet customers’ requirements for quality web formation, bonding, active weight regulation and minimal maintenance.
  • DILO Systems: a leader in the field of staple fibre nonwoven production lines, DiloGroup will present their latest developments at the fair, including staple fibre production lines, card feeding and cards and crosslappers & needlelooms.
  • Oerlikon: they will showcase spunbond solution lines for the production of polypropylene geotextiles. According to the company, spunbond geotextile applications are on the rise as the market is increasingly demanding more efficient processes and products, which means the product requirements are often the same or greater, but with a lower raw material input. Spunbonds are progressively replacing classical carded nonwovens due to their technical and commercial benefits.
  • Truetzschler Nonwovens: concentrating on solutions for producing a broad range of hygiene nonwovens including wipes at the fair, they will focus on thermobonding & spunlacing processes and the respective machinery, from fibre preparation down to winding.

Sewing machinery exhibitor highlights

  • Itema: making their debut at Cinte Techtextil, they are a leading supplier of weaving machines for technical fabrics production. According to the company, they are the only weaving machine producer to offer technical textile manufacturers the top three technologies for weft insertion: Rapier, Projectile and Airjet.
  • Picanol: they use their leading position as producers of weaving machines for other textile products to expand into machines for woven technical textiles by investing heavily in state-of-the-art technology, as well through the modular design of their machine platforms which allow them to serve different industry sectors effectively.
  • Lindauer Dornier: featuring in the German Pavilion this edition, they offer a number of weaving machine varieties including rapier, air-jet, open reed weave (ORW) and more. Their rapier weaving machines have set the technological standard in the high quality wool textiles market for decades, and this quality will be on display at their booth with the DORNIER P1 rapier weaving machine.

Domestic brands to watch out for

In addition to these leading overseas brands, a strong line-up of Chinese machinery producers will also feature at the fair, including Changshu Weicheng Non-Woven Equipment and Shijiazhuang Textile Machinery.

 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

02.05.2018

Demand for European technical textiles attracts leading companies to Cinte Techtextil China

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

  • Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
  • Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
  • Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
  • Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
  • Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.