From the Sector

Reset
3 results
Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right © AVK
Gerhard Lettl (AVK Board Member, C.F. Maier Europlast GmbH & Co. KG), Felix Pohlmeyer (ITA), Prof. Dr Jens Ridzewski (AVK Board Member, IMA Materialforschung und Anwendungstechnik GmbH), Tim Röding (ITA), from left to right
23.11.2023

CarboScreen: Sensor monitoring for complex carbon fibre production

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

Felix Pohlkemper and Tim Röding from Institut für Textiltechnik (ITA) of RWTH Aachen University are developing a technology with their start-up CarboScreen GmbH that makes complex carbon fibre production controllable through sensor monitoring. With the help of CarboScreen technology, it should be possible to double the production speed from the current 15 m/min to 30 m/min in the medium term. The doubling of production speed alone could result in an increase in turnover of up to €37.5 million per year and production plant. Felix Pohlkemper and Tim Röding were awarded third place in the AVK Innovation Award 2023 in the Processes and Procedures category for this ground-breaking development. The award ceremony took place during the JEC Roof Forum in Salzburg, Austria.

The production of carbon fibres is highly complex. In the current state of the art, however, the manufacturing process is only monitored manually by semi-skilled workers. However, even minimal fibre damage during production leads to a reduction in the quality of the carbon fibre. In extreme cases, it can also lead to plant fires. To ensure production quality, the production speed is currently limited to a maximum of 15 m/min. In fact, the production speed of the systems could be higher. The sensor-based online monitoring of Carbo-Screen makes it possible to increase the production speed to 30 m/min in the medium term. As a result of the increased production volume per system, the specific production costs of the carbon fibre are reduced, which can result in lower prices.

A reduced sales price would make it possible to use carbon fibres and their composite materials even more widely in traditional markets such as aerospace technology and wind energy, as well as for mass production in the automotive industry.

The CarboScreen online monitoring system is currently being developed for industrial use. It is to be validated at an industrial plant in 2024. CarboScreen GmbH was founded as part of EXIST funding and offers AI-supported sensor systems for carbon fibre production. The sensor technology continuously monitors the fibre throughout the entire production process. Deviations are detected automatically.

The winners of the AVK Innovation Award are honoured annually by the AVK Industrievereinigung Verstärkte Kunststoffe. Companies, institutes and their partners are honoured in three categories: products and applications, processes and procedures, and research and science.

28.01.2022

AVK-Innovationspreis 2022 – Ausschreibung beginnt

Die AVK - Industrievereinigung Verstärkte Kunststoffe e.V. bittet um Bewerbungen zum renommierten AVK Innovationspreis 2022 für den Bereich Faserverstärkte Kunststoffe (FVK) / Composites in folgenden Kategorien:

  • Innovative Produkte/Bauteile bzw. Anwendungen
  • Innovative Prozesse bzw. Verfahren
  • Forschung und Wissenschaft

Ein Ziel des Innovationspreises ist die Förderung neuer Produkte/Bauteile bzw. Anwendungen aus faserverstärkten Kunststoffen (FVK) sowie die Förderung neuer Verfahren bzw. Prozesse zur Herstellung dieser FVK-Produkte. Ein weiterer Preis geht an Universitäten, Hochschulen und Institute für herausragende wissenschaftliche Arbeiten in Forschung und Wissenschaft. In allen Kategorien wird besonderer Wert auf das Thema „Nachhaltigkeit“ gelegt. Ein wichtiges Ziel ist es, die Innovationen sowie die dahinterstehenden Firmen/Institutionen auszuzeichnen und so die Leistungsfähigkeit der gesamten Composites-Industrie öffentlichkeitswirksam darzustellen. Bewertet werden die Einreichungen von einer hochkarätigen Jury von Experten aus dem Composites-Bereich.

Die AVK - Industrievereinigung Verstärkte Kunststoffe e.V. bittet um Bewerbungen zum renommierten AVK Innovationspreis 2022 für den Bereich Faserverstärkte Kunststoffe (FVK) / Composites in folgenden Kategorien:

  • Innovative Produkte/Bauteile bzw. Anwendungen
  • Innovative Prozesse bzw. Verfahren
  • Forschung und Wissenschaft

Ein Ziel des Innovationspreises ist die Förderung neuer Produkte/Bauteile bzw. Anwendungen aus faserverstärkten Kunststoffen (FVK) sowie die Förderung neuer Verfahren bzw. Prozesse zur Herstellung dieser FVK-Produkte. Ein weiterer Preis geht an Universitäten, Hochschulen und Institute für herausragende wissenschaftliche Arbeiten in Forschung und Wissenschaft. In allen Kategorien wird besonderer Wert auf das Thema „Nachhaltigkeit“ gelegt. Ein wichtiges Ziel ist es, die Innovationen sowie die dahinterstehenden Firmen/Institutionen auszuzeichnen und so die Leistungsfähigkeit der gesamten Composites-Industrie öffentlichkeitswirksam darzustellen. Bewertet werden die Einreichungen von einer hochkarätigen Jury von Experten aus dem Composites-Bereich.

Der Einsendeschluss für die Bewerbungsunterlagen ist der 1. April 2022.
Mehr Informationen finden Sie hier.

Die Preisverleihung findet im Herbst 2022 während des JEC Forum DACH in Augsburg (29.-30.11.2022) statt.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

18.02.2021

AVK-Innovationspreis 2021 - Ausschreibung startet

  • Die AVK prämiert Innovationen im Bereich Faserverstärkte Kunststoffe (FVK) / Composites

Die AVK - Industrievereinigung Verstärkte Kunststoffe e.V. bittet um Bewerbungen zum renommierten AVK Innovationspreis 2021 für den Bereich Faserverstärkte Kunststoffe (FVK) / Composites in folgenden Kategorien:
 
•    Innovative Produkte/Bauteile bzw. Anwendungen
•    Innovative Prozesse bzw. Verfahren
•    Forschung und Wissenschaft
 

  • Die AVK prämiert Innovationen im Bereich Faserverstärkte Kunststoffe (FVK) / Composites

Die AVK - Industrievereinigung Verstärkte Kunststoffe e.V. bittet um Bewerbungen zum renommierten AVK Innovationspreis 2021 für den Bereich Faserverstärkte Kunststoffe (FVK) / Composites in folgenden Kategorien:
 
•    Innovative Produkte/Bauteile bzw. Anwendungen
•    Innovative Prozesse bzw. Verfahren
•    Forschung und Wissenschaft
 
Ein Ziel des Innovationspreises ist die Förderung neuer Produkte/Bauteile bzw. Anwendungen aus faserverstärkten Kunststoffen (FVK) sowie die Förderung neuer Verfahren bzw. Prozesse zur Herstellung dieser FVK-Produkte. Ein weiterer Preis geht an Universitäten, Hochschulen und Institute für herausragende wissenschaftliche Arbeiten in Forschung und Wissenschaft. In allen Kategorien wird besonderer Wert auf das Thema „Nachhaltigkeit“ gelegt. Ein wichtiges Ziel ist es, die Innovationen sowie die dahinterstehenden Firmen/Institutionen auszuzeichnen und so die Leistungsfähigkeit der gesamten Composites-Industrie öffentlichkeitswirksam darzustellen. Bewertet werden die Einreichungen von einer hochkarätigen Jury von Experten aus dem Composites-Bereich.
 
Der Einsendeschluss für die Bewerbungsunterlagen ist der 16. April 2021. Nähere Angaben und Bewertungskriterien finden Sie unter: https://www.avk-tv.de/innovationaward.php. Die Preisverleihung findet im Herbst 2021 statt.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.