From the Sector

Reset
3 results
conference on flame retardancy for composites Photo AVK Industrievereinigung Verstärkte Kunststoffe e. V.
26.11.2024

Successful conference on flame retardancy for composites in Berlin

On November 20th/21st, 2024, the second conference on flame retardancy for composite applications took place in Berlin, organised by the AVK - Industrievereinigung Verstärkte Kunststoffe e.V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

60 participants attended the international event, which this time focused on the requirements in the construction/infrastructure sector in addition to the transport sector.

In 14 presentations, 18 speakers provided information on new developments, requirements and innovations from the fields of standardisation, material development, construction/infrastructure, public transport, automotive and research & science.

Prof. Schartel from the Bundesanstalt für Materialforschung und –prüfung began with an introduction to the principle and concept of flame-retardant composites. In the following thematic blocks, the companies CTS Composite Technologie Systeme GmbH and Nabaltec AG provided information on new possibilities and developments at the material level of non-combustible fibre-reinforced plastics (FRP).

On November 20th/21st, 2024, the second conference on flame retardancy for composite applications took place in Berlin, organised by the AVK - Industrievereinigung Verstärkte Kunststoffe e.V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V.

60 participants attended the international event, which this time focused on the requirements in the construction/infrastructure sector in addition to the transport sector.

In 14 presentations, 18 speakers provided information on new developments, requirements and innovations from the fields of standardisation, material development, construction/infrastructure, public transport, automotive and research & science.

Prof. Schartel from the Bundesanstalt für Materialforschung und –prüfung began with an introduction to the principle and concept of flame-retardant composites. In the following thematic blocks, the companies CTS Composite Technologie Systeme GmbH and Nabaltec AG provided information on new possibilities and developments at the material level of non-combustible fibre-reinforced plastics (FRP).

The implementation of fire protection requirements in the operation of rail vehicles or for load-bearing FRP components played a major role in the area of construction/infrastructure, as did the sustainability of these building materials, which Frank Lüders from DB Systemtechnik GmbH and Kabelan Thavayogarajah from Fraunhofer LBF reported on in their presentations.

The well-known topic of e-mobility took its place in the automotive sector, where Dr. Christian Battenberg from Clariant Plastics &Coatings (Deutschland) GmbH spoke about flame retardants for applications in this field.

The successful event was rounded off by the Research and Science block with two presentations by Fraunhofer LBF and Deutsches Textilforschungszentrum Nord-
West gGmbH & Centre for Nanointegration Duisburg-Essen.

Over the course of one and a half days, the conference provided an important platform for experts from industry and science to discuss the latest developments and challenges in the field of flame retardancy for composites. The high level of participation highlighted the relevance of the topic and underpinned the decision to organise a third round of the conference in 2026.

Source:

AVK  Industrievereinigung Verstärkte Kunststoffe e. V.

Composites production volume in Europe since 2011 (in kt) Graphik AVK – Industrievereinigung Verstärkte Kunststoffe e. V.
Composites production volume in Europe since 2011 (in kt)
06.03.2024

European composites market on the level of 2014

After a long phase of continuous growth, the composites market has seen strong fluctuations since 2018. In 2023, the overall market for composites in Europe fell by 8%.

The current mood on the markets in Germany and Europe is rather negative within the industry. The main drivers are the persistently high energy and raw material prices. Added to this are problems in logistics chains and a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are fueling the negative sentiment. Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its pre-2020 volume. The construction industry, the second key application area, is currently in crisis. These factors have already caused the Eu-ropean composites production volume to fall significantly in recent years. There has now been another decline in Europe for 2023.

After a long phase of continuous growth, the composites market has seen strong fluctuations since 2018. In 2023, the overall market for composites in Europe fell by 8%.

The current mood on the markets in Germany and Europe is rather negative within the industry. The main drivers are the persistently high energy and raw material prices. Added to this are problems in logistics chains and a cautious consumer climate. A slowdown in global trade and uncertainties in the political arena are fueling the negative sentiment. Despite rising registration figures, the automotive industry, the most important application area for composites, has not yet returned to its pre-2020 volume. The construction industry, the second key application area, is currently in crisis. These factors have already caused the Eu-ropean composites production volume to fall significantly in recent years. There has now been another decline in Europe for 2023.

Overall development of the composites market
The volume of the global composites market totalled 13 million tons in 2023. Compared to 2022, with a volume of 12.3 million tons, growth was around 5%. In comparison, the European composites production volume fell by 8% in 2023. The total European composites market thus comprises a volume of 2,559 kilotons (kt) after 2,781 kt in 2022.

The market is therefore declining and falling back to the level of 2014. Overall, market momentum in Europe was lower than in the global market. Europe's share of the global market is now around 20%.

As in previous years, development within Europe is not uniform. The differences are due to very different regional core markets, the high variability of the materi-als used, a wide range of different manufacturing processes and widely differing areas of application. Accordingly, there are different regional trends, especially with regard to the individual processes, although there were declines in all re-gions and for almost all processes in 2023. At almost 50% of the market volume, the transportation sector accounts for the largest share of total composites pro-duction in terms of volume. The next two largest areas are the electri-cal/electronics sector and applications in construction and infrastructure.

The entire market report 2023 is available for download: https://www.avk-tv.de/publications.php.

AVK Flammschutztagung Foto: AVK
25.05.2023

AVK: Erfolgreiche Flammschutztagung in Berlin

  • Flame Retardancy for Composite Applications in the Transport Sector

Am 10.-11. Mai 2023 veranstaltete die AVK – Industrievereinigung Verstärkte Kunststoffe e. V. in Kooperation mit der FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin erstmals eine internationale, englischsprachige Fachtagung zum Thema Flammschutz.

In 18 kompakten Vorträgen informierten über 20 Experten knapp 80 Teilnehmer über Neuerungen, Anforderungen und Innovationen zu spezifischen Flammschutzeigenschaften bei Bauteilen aus faserverstärkten Kunststoffen/Composites für den Transportbereich.

So gab es Vorträge von Industrievertretern von Saertex, BÜFA, Clariant, Diehl Aviation und Airbus, ebenso von Instituten wie den Fraunhofer-Instituten oder der Bundesanstalt für Materialforschung und -prüfung. Es standen Vorträge zu den Themen Standardisierung, Rohmaterialien, Automotive oder Recycling auf dem Programm, aber auch Flammschutzmittel für Anschlüsse und Batteriegehäuse für Elektrofahrzeuge oder feuerhemmende Systeme für Schienenfahrzeuge oder feuerhemmendes CFK aus recyceltem CF-Vliesstoff wurden vorgestellt.

  • Flame Retardancy for Composite Applications in the Transport Sector

Am 10.-11. Mai 2023 veranstaltete die AVK – Industrievereinigung Verstärkte Kunststoffe e. V. in Kooperation mit der FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin erstmals eine internationale, englischsprachige Fachtagung zum Thema Flammschutz.

In 18 kompakten Vorträgen informierten über 20 Experten knapp 80 Teilnehmer über Neuerungen, Anforderungen und Innovationen zu spezifischen Flammschutzeigenschaften bei Bauteilen aus faserverstärkten Kunststoffen/Composites für den Transportbereich.

So gab es Vorträge von Industrievertretern von Saertex, BÜFA, Clariant, Diehl Aviation und Airbus, ebenso von Instituten wie den Fraunhofer-Instituten oder der Bundesanstalt für Materialforschung und -prüfung. Es standen Vorträge zu den Themen Standardisierung, Rohmaterialien, Automotive oder Recycling auf dem Programm, aber auch Flammschutzmittel für Anschlüsse und Batteriegehäuse für Elektrofahrzeuge oder feuerhemmende Systeme für Schienenfahrzeuge oder feuerhemmendes CFK aus recyceltem CF-Vliesstoff wurden vorgestellt.