From the Sector

Reset
33 results
Award winners with foundation chairman, foundation MD and professors (c) VDMA e.V. Textile Machinery
Award winners with foundation chairman, foundation MD and professors
08.12.2023

Walter Reiners Foundation honours young engineers

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

This year's promotion award in the Diploma/Master's category, endowed with prize money of 3,500 euros, went to Flávio Diniz from RWTH Aachen. The subject of his Master's thesis was the feasibility of manufacturing ultra-thin carbon fibres.

The award ceremony 2024 will take place in April at the VDMA stand at the Techtextil fair in Frankfurt.

17.11.2023

Alliance for European Flax-Linen and Hemp: Flax fibres for Sailing boats

The adoption of composite parts based on flax fibres by the Marine Industry continues to grow, with major OEMs as well as smaller shipyards now aiming to take advantage of the reduced carbon impact and impressive mechanical properties they can provide.

“Over the last ten or fifteen years, several innovative flax fibre boats have been built and the fibre has started to gain significant traction,” says Julie Pariset, Innovation & CSR Director at the Alliance for European Flax-Linen and Hemp. “In addition to the environmental benefits, manufacturers are realising significant technical and processing gains with flax fibre composites.”

“Flax is a very low-density fibre, with a high specific stiffness,” she explains. “It can be used to manufacture composite laminates with mechanical properties not dissimilar to typical E-glass composites and the coefficient of thermal expansion of a flax fibre epoxy part is also quite close to that of a carbon fibre part.” This allows the materials to work well in combined assemblies with carbon fibre composites and the flax parts are also highly impact resistant.

The adoption of composite parts based on flax fibres by the Marine Industry continues to grow, with major OEMs as well as smaller shipyards now aiming to take advantage of the reduced carbon impact and impressive mechanical properties they can provide.

“Over the last ten or fifteen years, several innovative flax fibre boats have been built and the fibre has started to gain significant traction,” says Julie Pariset, Innovation & CSR Director at the Alliance for European Flax-Linen and Hemp. “In addition to the environmental benefits, manufacturers are realising significant technical and processing gains with flax fibre composites.”

“Flax is a very low-density fibre, with a high specific stiffness,” she explains. “It can be used to manufacture composite laminates with mechanical properties not dissimilar to typical E-glass composites and the coefficient of thermal expansion of a flax fibre epoxy part is also quite close to that of a carbon fibre part.” This allows the materials to work well in combined assemblies with carbon fibre composites and the flax parts are also highly impact resistant.

Flax fibres also provide acoustic and vibration damping in composite applications, as well as providing a warm and aesthetically pleasing appearance below decks.

ecoRacer30
As a member of the Alliance for European Flax-Linen and Hemp, Bcomp, headquartered in Fribourg, Switzerland, has this year been working with Northern Light Composites (nlcomp), based in Monfalcone, northern Italy, on the creation of what is billed as the first fully recyclable nine-metre-long sailing boat – the ecoRacer30.

The boat is based on nlcomp’s proprietary rComposite technology – a combination of thermoplastic resins and BComp’s ampliTex high-performance natural fibre reinforcement fabrics and patented powerRibs technology.

It was built in a collaborative effort with the help of Barcelona-based Magnani Yachts, which took care of the composite manufacturing, and Sangiorgio Marine, which provided technical assistance as the boat was being assembled at its shipyard in Genova, Italy.

Magnani Yachts has subsequently become the first shipyard to hold an rComposite license and others are now being encouraged to adopt the technology.

The second ecoracer30 is currently under construction and has already been sold and nlcomp is planning to build a fleet of eight of these boats in time to enter a series of regattas in the summer of 2025.

Flax 27 Daysailer
Greenboats, based in Bremen, Germany, is another specialist in building boats from natural fibre composites and has this year launched the Flax 27 daysailer.

The lower hull of this vessel is also made from Bcomp’s ampliTex technical fabrics in combination with a sandwich core of recycled PET bottles. Using a vacuum infusion process, the fibres were integrated with a plant-based epoxy resin in order to further reduce the CO2 footprint of the vessel.

The light structure and modern shapes of the lower hull of the boat result in very fast, sharp and agile handling on the water.

Greenboats has also recently announced significant new backing from alliance member Groupe Depestele, which manages 13,000 hectares of flax land in Normandy, France.

Blue Nomad
A project in Switzerland has meanwhile proposed the use of flax fibre composites in solar-powered habitats designed for comfortable living on the oceans – as the world grapples with the frightening implications of climate change and rising sea levels.

As envisaged by students from Institut auf dem Rosenberg in St Gallen, Switzerland working with Denmark-based SAGA Space Architects, Blue Nomad structures would form modular blocks to establish large communities and oceanic farms.
 

Source:

Alliance for European Flax-Linen and Hemp

17.11.2023

Cinte Techtextil China 2024 taking place in September 2024

Cinte Techtextil China 2024, one of Asia’s leading technical textiles and nonwovens trade fair, will take place from 19 – 21 September 2024 at the Shanghai New International Expo Centre. In its capacity as a well-established platform for the latest textiles, nonwovens, and equipment, the 18th edition of the fair will offer business opportunities across the industry supply chain. With the previous edition attracting 467 exhibitors from 13 countries and regions across 40,000 sqm, the organisers are looking to build on that success at next year’s show.

With next year’s fair expected to again see strong domestic and international participation, the previous edition featured the return of the Taiwan Pavilion, the 40-exhibitor strong European Zone, and seven Chinese regional pavilions. At every edition, multiple fringe events enhance business connections and provide insights to fairgoers. In 2023, key highlights included the 11th China International Nonwovens Conference, the Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum, various marine textile and rope netting events, and the “Kingsafe Dangs” University Students’ Showcase.

Cinte Techtextil China 2024, one of Asia’s leading technical textiles and nonwovens trade fair, will take place from 19 – 21 September 2024 at the Shanghai New International Expo Centre. In its capacity as a well-established platform for the latest textiles, nonwovens, and equipment, the 18th edition of the fair will offer business opportunities across the industry supply chain. With the previous edition attracting 467 exhibitors from 13 countries and regions across 40,000 sqm, the organisers are looking to build on that success at next year’s show.

With next year’s fair expected to again see strong domestic and international participation, the previous edition featured the return of the Taiwan Pavilion, the 40-exhibitor strong European Zone, and seven Chinese regional pavilions. At every edition, multiple fringe events enhance business connections and provide insights to fairgoers. In 2023, key highlights included the 11th China International Nonwovens Conference, the Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum, various marine textile and rope netting events, and the “Kingsafe Dangs” University Students’ Showcase.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions. This scope of product groups and application areas ensures that the fair is an effective business platform for the entire industry.

The fair is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA).

Source:

Messe Frankfurt (HK) Limited

08.11.2023

Hexcel showcases new fiber HexPly® M79 Prepregs at METSTRADE 2023

Hexcel will continue to celebrate its 75th anniversary and highlight its latest developments for the Marine market at METSTRADE 2023 on November 15-17. Hexcel will showcase innovative advanced lightweight material technologies including new intermediate and high modulus fiber HexPly® M79 prepregs and present example high-performance superyacht and windship components developed by customers using Hexcel materials.

The new intermediate modulus prepreg combines the low temperature curing and simple processing of the DNV GL accredited HexPly M79 resin system with the market-leading stiffness of HexTow® IM2C fiber, creating a uniquely optimized composite material for highly loaded components. Originally developed to provide best-in-class performance for America’s Cup and IMOCA hull and deck structures, the new combination minimizes structural deformation under load in parts such as rigs, foils, and other appendages.

Hexcel will continue to celebrate its 75th anniversary and highlight its latest developments for the Marine market at METSTRADE 2023 on November 15-17. Hexcel will showcase innovative advanced lightweight material technologies including new intermediate and high modulus fiber HexPly® M79 prepregs and present example high-performance superyacht and windship components developed by customers using Hexcel materials.

The new intermediate modulus prepreg combines the low temperature curing and simple processing of the DNV GL accredited HexPly M79 resin system with the market-leading stiffness of HexTow® IM2C fiber, creating a uniquely optimized composite material for highly loaded components. Originally developed to provide best-in-class performance for America’s Cup and IMOCA hull and deck structures, the new combination minimizes structural deformation under load in parts such as rigs, foils, and other appendages.

For a high modulus solution, HexTow® HM54 fiber is also now available with the HexPly M79 resin system. The unique mechanical properties of HexTow HM54 fiber allow structural designers to achieve higher safety margins for both stiffness and strength critical applications. Both products can be manufactured with Hexcel G-Vent technology for out-of-autoclave processing, delivering a reduction in process time and cost without compromising mechanical performance.

Hexcel will also display customer products that have benefited from the performance and processing gains provided by HexPly materials. A section of a Solid Sail mast made using Bureau Veritas (BV)-approved HexPly® M9.6 prepregs will be exhibited at METS. Such masts are used for wind propulsion and, by harnessing the power of ocean winds, they reduce reliance on engines, reducing fuel usage and emissions.

Visitors to the Hexcel booth will also see a section of a radar arch part from luxury motor yacht builder Sunseeker made using HexPly® XF surfacing technology and HexPly® SuperFIT semi-pregs. The part is lighter in weight and stiffer than versions made using resin-infusion processes and de-molds with a pinhole-free surface that needs minimal preparation to be ready for painting. Sunseeker has recorded an overall reduction in process time and material costs of around 30% against traditional prepreg parts, using Hexcel composite materials.

Source:

Hexcel

Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

fibrEX: Zentrifugalfilter nutzt den Dichteunterschiede von Kunstfasern und Wasser. © Fraunhofer UMSICHT
fibrEX: Zentrifugalfilter nutzt den Dichteunterschiede von Kunstfasern und Wasser.
28.09.2023

Neuartiger Filter entfernt Kunstfaserabrieb aus Waschwasser

Um zu verhindern, dass Mikroplastik aus Waschmaschinen in die Umwelt gelangt, haben Forschende des Fraunhofer UMSICHT den Zentrifugalfilter fibrEX entwickelt. Der flexibel integrierbare und wartungsfreie Filter trennt aus Waschwasser mikroskopisch kleine Kunstfasern ab. Aktuell werden potenzielle Partner für die letzten Schritte bis zur Markteinführung gesucht.

Textilien aus Kunstfasern wie Polyester und Elasthan halten Regen ab, sind strapazierfähig und dabei trotzdem elastisch. Ihr Anteil in hiesigen Kleiderschränken liegt bei über 60 Prozent liegt. Auch diese Kleidung muss gewaschen werden –im Fall von Sportbekleidung sogar sehr oft. Während des Waschvorgangs werden Fragmente der Kunstfasern abgerieben, die höchstens ein Fünftel so dick sind wie ein menschliches Haar. Aufgrund von Größe und Material zählen sie zu Mikroplastik, jenen mikroskopisch kleinen Kunststoffpartikeln, die – einmal in die Umwelt gelangt – nur schwer abbaubar sind.

Um zu verhindern, dass Mikroplastik aus Waschmaschinen in die Umwelt gelangt, haben Forschende des Fraunhofer UMSICHT den Zentrifugalfilter fibrEX entwickelt. Der flexibel integrierbare und wartungsfreie Filter trennt aus Waschwasser mikroskopisch kleine Kunstfasern ab. Aktuell werden potenzielle Partner für die letzten Schritte bis zur Markteinführung gesucht.

Textilien aus Kunstfasern wie Polyester und Elasthan halten Regen ab, sind strapazierfähig und dabei trotzdem elastisch. Ihr Anteil in hiesigen Kleiderschränken liegt bei über 60 Prozent liegt. Auch diese Kleidung muss gewaschen werden –im Fall von Sportbekleidung sogar sehr oft. Während des Waschvorgangs werden Fragmente der Kunstfasern abgerieben, die höchstens ein Fünftel so dick sind wie ein menschliches Haar. Aufgrund von Größe und Material zählen sie zu Mikroplastik, jenen mikroskopisch kleinen Kunststoffpartikeln, die – einmal in die Umwelt gelangt – nur schwer abbaubar sind.

„Zwischen 20 und 35 Prozent des weltweit verbreiteten Mikroplastiks sind synthetische Mikrofasern aus Textilien. Synthetische Textilien sind demnach eine der größten Mikroplastik-Quellen und stehen im Fokus von Politik und Gesellschaft“, so Dr.-Ing. Ilka Gehrke, Leiterin der Abteilung Umwelt und Ressourcennutzung am Fraunhofer UMSICHT. Auf europäischer Ebene laufen bereits Prozesse zur Vorbereitung von Richtlinien gegen die Freisetzung von synthetischen Mikrofasern. „In Frankreich etwa dürfen ab 2025 keine Waschmaschinen ohne Mikrofaserfilter mehr in Verkehr gebracht werden.“

Bisher sind kaum Waschmaschinen mit entsprechenden Filtern auf dem kommerziellen Markt erhältlich. Und solche, die es zu kaufen gibt, halten zwar die Mikrofasern zurück, verlieren aber schnell an Leistung. Die Kleinstfasern werden am Filtermaterial zurückgehalten, bilden eine Deckschicht und führen so zur Verblockung des Filters. Im schlimmsten Fall kann kein Waschwasser mehr abfließen, sodass der Waschprozess zum Stillstand kommt.

Als Lösung dieses Problems haben Forschende des Fraunhofer UMSICHT den kürzlich patentierten Zentrifugalfilter fibrEX entwickelt. Anders als ein Siebsystem, nutzt er die Dichteunterschiede von Kunstfasern und Wasser und trennt beim Schleudern die beiden Komponenten voneinander. Der Zentrifugalfilter kann sowohl in die Waschmaschine eingebaut als auch als externes Gerät betrieben werden; zum Betrieb wird keine weitere nennenswerte Energie benötigt.

Nach einer einjährigen Testphase im Waschlabor und technischen Optimierungen hält fibrEX nun dauerhaft und wartungsfrei mindestens 80 Prozent der synthetischen Mikrofasern aus dem Waschwasser zurück. Es werden Waschmaschinenhersteller gesucht, fibrEX gemeinsam zur Marktreife zu bringen.

Cinte Techtextil China 2023 with different zones (c) Messe Frankfurt (HK) Ltd
14.09.2023

Cinte Techtextil China 2023 with different zones

Technological progress often results from close collaboration, and industries that rely on continual improvement stand to benefit from the return to in-person business. Cinte Techtextil China’s first edition since eased pandemic measures is set to reflect a 27.9% increase in exhibitor numbers, with a rejuvenated international contingent further supplemented by the return of the European Zone. Taking place from 19 – 21 September across 40,000 sqm at the Shanghai New International Expo Centre, the platform is expected to welcome buyers from across Asia, Europe, and beyond. Pre-registrations have doubled compared to the previous edition, and international buyers account for over 20% of the total.

The new zone, Marine Textile Zone, will be comprised of multiple Chinese green marine and nautical rope netting exhibitors, while also hosting the Technology Exchange Forum, and the awards ceremony of the Top 10 Suppliers in the China Rope Net Industry. Prominent exhibitors in this zone include Ropenet Group, Hunan Xinhai, and Zhejiang Four Brothers Rope.

Technological progress often results from close collaboration, and industries that rely on continual improvement stand to benefit from the return to in-person business. Cinte Techtextil China’s first edition since eased pandemic measures is set to reflect a 27.9% increase in exhibitor numbers, with a rejuvenated international contingent further supplemented by the return of the European Zone. Taking place from 19 – 21 September across 40,000 sqm at the Shanghai New International Expo Centre, the platform is expected to welcome buyers from across Asia, Europe, and beyond. Pre-registrations have doubled compared to the previous edition, and international buyers account for over 20% of the total.

The new zone, Marine Textile Zone, will be comprised of multiple Chinese green marine and nautical rope netting exhibitors, while also hosting the Technology Exchange Forum, and the awards ceremony of the Top 10 Suppliers in the China Rope Net Industry. Prominent exhibitors in this zone include Ropenet Group, Hunan Xinhai, and Zhejiang Four Brothers Rope.

Other domestic exhibitors, such as Shanghai Shenda Kebao New Materials, SIJIA New Material (Shanghai), Zhejiang Hailide New Material, and Zhejiang Jinda New Materials, will showcase products for applications in outdoor advertising, tents, boats, vehicles, environmental engineering, and much more.

Supplementing the fairground’s wide variety of domestic suppliers will be a much-increased showing of international exhibitors, with many to be found within hall E1’s European Zone. Several global industry leaders are featured in their categories below:

Nonwovens equipment

  • Autefa Solutions, Germany: solutions provider for nonwovens lines and machines for carded-crosslapped needlepunching lines, spunlace lines and thermobonding lines.
  • Dilo, Germany: in addition to offering general services, Dilo supplies opening and blending equipment, carding and airlay machines, and crosslapping and needling machines.
  • Groz-Beckert, Germany: provider of industrial machine needles, precision parts and fine tools, as well as systems and services for the production and joining of textile fabrics.
  • Reifenhäuser Reicofil, Germany: provider of innovative technologies and components for plastics extrusion, producing blown films, cast films, sheets as well as nonwovens.

Weaving equipment

  • Itema, Italy: provider of advanced weaving machines, spare parts, and integrated services, specifically for rapier, air jet and projectile weft insertion technologies.
  • Lindauer DORNIER, Germany: the company manufactures weaving machines, film stretching lines, and composite systems, also offering technical support and spare parts supply.
  • Picanol, Belgium: producer and servicer of high-tech air jet and rapier weaving machines, with around 2,600 weaving mills utilising their systems worldwide.

Coating and lamination

  • BRÜCKNER Textile Technologies, Germany: manufacturer of machines and lines for the coating and finishing of apparel fabric, technical textiles, nonwovens, glass fabrics and floor coverings.
  • ROWA Lack, Germany: developer of high-quality materials and product solutions for the polymer industry, with applications including automotive, electrical engineering, construction, technical textiles, and medical technology.
  • Stahl, the Netherlands: the Dutch company provides high quality coatings, dyes and process chemicals for leather, flexible coated substrates, textiles, films and foils, paper, and related products.

Fibre

  • Monosuisse, Switzerland: with production sites in Switzerland, Poland, Romania, Mexico, and Germany, Monosuisse manufactures various precise, high-quality polymer monofilaments from 19µm to 3.00 mm in diameter.
  • Perlon, Germany: specialised in the manufacture of synthetic filaments in diverse application areas, including paper machine clothing, dental care, and advanced technical textiles for agriculture, 3D printing, sports and leisure, home, and more.

Meanwhile, first-time exhibitors include Rökona (Germany), showcasing RE:SPACE, their range of recycled technical textiles; Testex AG (Switzerland), the official OEKO-TEX® representative in multiple countries including China; Hohenstein (Germany), the renowned testing laboratory and research institute; and zwissTEX (Germany), the knitted fabrics and lamination specialists. In addition, the returning Taiwan Pavilion is set to feature the debut of Shinih Enterprise Co Ltd (Taiwan China).

Beyond the innovation displayed at the booths, the fair’s programme is set to welcome global experts from various technical textile and nonwoven sub-sectors to offer specific insights and unveil innovations. Highlighted events include:

The 11th China International Nonwovens Conference
14 sessions cover topics such as the quality control of medical supplies; green development in technology and applications in the nonwovens industry; and the development and application of flashspun nonwovens in China.

Marine textiles and rope netting events
Events specific to this zone include the Top 10 Suppliers in the China Rope Net Industry; Conference on Textile Applications for Marine Engineering and Fisheries; and the China Nonwovens & Industrial Textiles Association (CNITA) Rope Net Branch Council Meeting

"Nonwovens, Creating a Better Life” Innovation Showcase
Product display area showcasing around 100 nonwovens products with applications in five areas: medical and health, quality of life, human habitat, sustainable development, and innovative design.

Advanced Technical Textiles Industry Chain Synergistic Innovation Development Forum
Includes presentations from multiple key players in the technical textile industry, including Mr Steven Liu, Commercial Manager of Polymer Additives Business of Sanitized (China) Ltd.

Source:

Messe Frankfurt (HK) Ltd

11.09.2023

Project and technology study: Trends and Design Factors for Hydrogen Pressure Vessels

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.


AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

The AZL team, renowned for its high reputation in providing market and technology insights as well as developing component and production concepts in the format of Joint Partner Projects seeks for companies along the whole composite value chain interested in further developing their application know how in this economically highly relevant field.

The project will provide an in depth exploration of market insights, regulatory standards, and intellectual property landscapes. Beyond this, there is a dedicated focus on staying updated with state of the art and advancements in design, materials, and man ufacturing techniques.

An integral component of the project involves the creation of reference designs by AZL´s engineering team. The reference designs will encompass a variety of pressure vessel configurations and will consider a diverse range of materials and production concep ts.

With the scheduled project start in October 2023, and a project timeline of approximately nine months, AZL encourages companies active across the composite value chain to participate. Companies interested in participating or seeking further information should reach out directly to the AZL expert team.

Source:

Aachener Zentrum für integrativen Leichtbau

© Fraunhofer UMSICHT
Im Projekt Power2C4 haben die Forschenden u.a. ein neues Katalysatorsystem auf Basis eines synthetischen Saponiten identifiziert und anschließend synthetisiert.
06.06.2023

Nachhaltigere und emissionsärmere Syntheseroute für Polymere

Butadien ist eine wichtige Plattformchemikalie, um Polymere – u.a. für die Produktion von Autoreifen – herzustellen. Bislang wird das Monomer aber meist auf Basis von Erdöl gewonnen. Eine alternative Syntheseroute haben Forschende des Fraunhofer UMSICHT im Rahmen des Projektes Power2C4 untersucht. Im Fokus: ein katalytisches Verfahren unter Einsatz regenerativ erzeugten Stroms.

»Butadien spielt eine wichtige Rolle bei der Herstellung von Polymeren«, ordnet UMSICHT-Wissenschaftler Marc Greuel ein. Neben Polybutadien, das in Autoreifen Anwendung findet, können Polytetrahydrofuran (PTHF), Polybutylenterephtalat (PBT) und Polybutylensuccinat (PBS) aus dem Monomer erzeugt werden. »Der Haken: Aktuell wird Butadien zu 95 Prozent als Nebenprodukt beim thermischen Zersetzen von Rohbenzin zu Ethen gewonnen – unter Ausstoß von Kohlendioxid. Zudem werden die Preise für Butadien perspektivisch ansteigen, da sich die Rohstoffbasis für Ethen immer mehr in Richtung Schiefergas verschiebt und dadurch die Produktionskapazität für Butadien sinkt.« Das Interesse an einem alternativen Herstellungsprozess ist also nicht nur aus Klimaschutzgründen groß.

Butadien ist eine wichtige Plattformchemikalie, um Polymere – u.a. für die Produktion von Autoreifen – herzustellen. Bislang wird das Monomer aber meist auf Basis von Erdöl gewonnen. Eine alternative Syntheseroute haben Forschende des Fraunhofer UMSICHT im Rahmen des Projektes Power2C4 untersucht. Im Fokus: ein katalytisches Verfahren unter Einsatz regenerativ erzeugten Stroms.

»Butadien spielt eine wichtige Rolle bei der Herstellung von Polymeren«, ordnet UMSICHT-Wissenschaftler Marc Greuel ein. Neben Polybutadien, das in Autoreifen Anwendung findet, können Polytetrahydrofuran (PTHF), Polybutylenterephtalat (PBT) und Polybutylensuccinat (PBS) aus dem Monomer erzeugt werden. »Der Haken: Aktuell wird Butadien zu 95 Prozent als Nebenprodukt beim thermischen Zersetzen von Rohbenzin zu Ethen gewonnen – unter Ausstoß von Kohlendioxid. Zudem werden die Preise für Butadien perspektivisch ansteigen, da sich die Rohstoffbasis für Ethen immer mehr in Richtung Schiefergas verschiebt und dadurch die Produktionskapazität für Butadien sinkt.« Das Interesse an einem alternativen Herstellungsprozess ist also nicht nur aus Klimaschutzgründen groß.

Die Frage, wie eine nachhaltigere, emissionsärmere und auch günstige Syntheseroute aussehen kann, stand im Zentrum des Projektes Power2C4. Angesiedelt im Kompetenzzentrum »Virtuelles Institut – Strom zu Gas und Wärme« hat es Expertinnen und Experten des Fraunhofer UMSICHT, des Gas- und Wärme-Instituts Essen e.V., des Energiewirtschaftlichen Instituts an der Universität zu Köln, des Forschungszentrums Jülich, der Ruhr-Universität Bochum, des Wuppertal-Instituts und des ZBT Duisburg zusammengeführt. Ihre Zielsetzung: Flexibilitätsoptionen vor dem Hintergrund der Energiewende zu untersuchen. Im Fokus des Teilprojekts Power2C4 stand ein neues katalytisches Herstellungsverfahren unter Einsatz regenerativ erzeugten Stroms. Ausgangspunkt ist Ethanol, das zum Beispiel im Zuge einer Hydrierungsreaktion aus CO2 und elektrolytisch erzeugtem Wasserstoff gewonnen wird. Dieses Ethanol dient in einem zweiten Schritt zur Synthese von Butadien mittels des sogenannten Lebedev-Prozesses.

Vielversprechendes Katalysatorsystem identifiziert
Da der erste Schritt bereits Gegenstand zahlreicher Forschungsaktivitäten ist, konzentrierten sich Wissenschaftlerinnen und Wissenschaftler auf die Weiterveredlung des Ethanols zu Butadien und die Verfahrenskopplung beider Schritte. »Wir haben u.a. ein neues Katalysatorsystem auf Basis eines synthetischen Saponiten identifiziert und anschließend synthetisiert«, erklärt Dr. Barbara Zeidler-Fandrich vom Fraunhofer UMSICHT. Die Testung der katalytischen Aktivität erfolgte in einer eigens konstruierten Versuchsanlage. »Aufbauend auf einem ersten Screening haben wir aussichtsreiche Materialien weiter optimiert. Das Ergebnis: Verglichen mit dem unmodifizierten Ausgangsmaterial lässt sich die Butadien-Selektivität im Rahmen der Katalysatoroptimierung deutlich erhöhen. Allerdings ist auch klar geworden, dass noch weiteres Potenzial zur Verbesserung der Katalysatorperformance besteht.«

Nachhaltigkeitsbewertung des Power-to-Butadien-Prozesses
Wie nachhaltig dieser Power-to-Butadien-Prozess wirklich ist, haben Dr. Markus Hiebel und Dr. Daniel Maga vom Fraunhofer UMSICHT in einer Life Cycle Analysis (LCA) untersucht. Beleuchtet haben sie dabei – neben unterschiedlichen Katalysatoren – die Herstellungsmethode von Ethanol und die Relevanz der eingesetzte Energiequelle. »Wir konnten zeigen, dass der Lebedev-Prozess je nach verwendeter Ethanol- und Energiequelle das Potenzial hat, Butadien und damit auch Styrol-Butadien-Kautschuk aus biobasiertem Ethanol oder CO2-basiertem Ethanol herzustellen und CO2-Emissionen zu reduzieren«, so Daniel Maga. »Damit ermöglicht der Power2C4-Prozess die Nutzung alternativer Kohlenstoffquellen.« Besonders die Nutzung von Ethanol aus Restbiomasseströmen wie Bagasse oder Stroh eröffne Wege, Treibhausgasemissionen von Butadien deutlich zu reduzieren. Zudem führe ein Strommix mit immer höheren Anteilen an erneuerbaren Energien zur Möglichkeit, Treibhausgasreduktionen über Carbon-Capture-and-Utilization-Prozesse (CCU) zu realisieren.
 
FÖRDERHINWEIS
Das Kompetenzzentrum »Virtuelles Institut – Strom zu Gas und Wärme« wird gefördert durch das »Operationelle Programm zur Förderung von Investitionen in Wachstum und Beschäftigung für Nordrhein-Westfalen aus dem Europäischen Fonds für regionale Entwicklung« (OP EFRE NRW) sowie durch das Ministerium für Wirtschaft, Innovation, Digitalisierung und Energie des Landes Nordrhein-Westfalen.

05.06.2023

Resource-efficient dyeing solutions for sustainable PA fibers

CHT and Fulgar have collaborated to support the goal of reducing the carbon footprint with an effective and sustainable solution for the textile market.

Combining FULGAR’s circular economy ready yarns with CHT’s resource-saving dyeing techniques significantly reduces the usage of natural resources and leads to lower environmental impact and ultimately a lower carbon footprint. The combined process needs less water, uses less energy, and saves time while meeting the color fastness standards for finished textile products.

The combination of 100 % biobased polyamide EVO® by FULGAR yarns with CHT sustainable dyeing application can save water up to 64 %, energy use up to 50 % and process time up to 50 %, when compared to standard dyeing processes. Sustainable dyeing of EVO® is promoted using CHT’s soy-based dyeing auxiliary SARABID TS 300. SARABID TS 300 has accredited a C2C Certified Material Health Certificate at Gold level and USDA Certified Biobased Product Certification.

CHT and Fulgar have collaborated to support the goal of reducing the carbon footprint with an effective and sustainable solution for the textile market.

Combining FULGAR’s circular economy ready yarns with CHT’s resource-saving dyeing techniques significantly reduces the usage of natural resources and leads to lower environmental impact and ultimately a lower carbon footprint. The combined process needs less water, uses less energy, and saves time while meeting the color fastness standards for finished textile products.

The combination of 100 % biobased polyamide EVO® by FULGAR yarns with CHT sustainable dyeing application can save water up to 64 %, energy use up to 50 % and process time up to 50 %, when compared to standard dyeing processes. Sustainable dyeing of EVO® is promoted using CHT’s soy-based dyeing auxiliary SARABID TS 300. SARABID TS 300 has accredited a C2C Certified Material Health Certificate at Gold level and USDA Certified Biobased Product Certification.

EVO® by FULGAR, the totally renewable yarn based on castor plants, does not require high amounts of water - 4 times less compared to cotton. In addition to the sustainable aspect, EVO® by FULGAR offers characteristics like lower fiber weight, particular moisture management and higher stretch often without the need for elastomer fiber. This helps to avoid material mixes for better recycling opportunities. EVO® provides greater user comfort, mainly for performance and casual apparel.

More information:
CHT Evo by Fulgar Fulgar
Source:

CHT Germany GmbH

Photo: CHT
26.05.2023

BEZAKTIV ONE: New Reactive dyes range by CHT

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

  • Reactive dyes for water and energy saving dye processes with significantly shortened process time

BEZAKTIV ONE covers a broad color spectrum with tinctorial very strong dyes. This enables a cost-efficient dye process with significantly less dye and salt. The excellent wash-off behavior allows short rinse cycles at lower temperatures and therefore offers further ecological and economic advantages. The dyes are particularly suitable for durable textiles due to their good multiple wash fastness.

Cellulosic fibers are often dyed with reactive dyes, as these are commercially available in a wide range of colors that result in dyeings with high wash fastness. However, reactive dyeings require a lot of water due to the necessary rinsing processes. Due to increased ecological requirements, the development of energy and water saving processes is not just a trend, but rather a core prerequisite for new dyes.

A minimal number of rinsing baths and generally lower temperatures for dye exhaust, rinsing and soaping contribute to an overall efficient water and energy saving dyeing processes.

BEZAKTIV ONE dyes can be dyed, rinsed and soaped between 40 and 60 °C. Therefore, the BEZAKTIV ONE exhaust dyeing process is significantly shorter compared to conventional reactive dyeing processes, where temperatures between 60 and 98 °C are required. This advantage means savings in process time and higher productivity for the textile dyer.

The advantages become particularly clear when dyeing medium to dark shades with the BEZAKTIV ONE process. Due to the high fixation level in combination with good color build-up dark shades can be matched with lower dye concentrations of BEZAKTIV ONE than with conventional bifunctional reactive dyes. The addition of the auxiliary COTOBLANC SEL in the second soap bath has an additional positive effect, so that a washing process with low water and energy consumption generates excellent wet fastness properties on the textile.

BEZAKTIV ONE Foto: CHT
25.05.2023

BEZAKTIV ONE: Neues Reaktivfarbstoff-Sortiment von CHT

  • Reaktivfarbstoffe für wasser- und energiesparende Färbeprozesse mit stark verkürzten Prozesszeiten

BEZAKTIV ONE deckt ein breites Spektrum an außergewöhnlich starken Farbstoffen ab. Dies ermöglicht kosteneffiziente Färbeprozesse mit weniger Farbstoff und Salz. Das ausgezeichnete Auswaschverhalten ermöglicht kurze Spülprozesse bei tiefer Temperatur und bietet dadurch einen weiteren ökonomischen und ökologischen Vorteil. Die Farbstoffe eignen sich durch ihre gute Mehrfachwaschechtheit besonders für langlebige Textilien.

Zellulosefasern werden häufig mit Reaktivfarbstoffen gefärbt, da diese in einer Vielzahl von Farben kommerziell erhältlich sind und Färbungen mit hoher Waschechtheit ergeben. Reaktivfärbungen benötigen durch die notwendigen Spülprozesse jedoch viel Wasser. Aufgrund der gestiegenen ökologischen Anforderungen ist die Entwicklung energie- und wassersparender Verfahren eine Kernanforderung an neue Farbstoffe.

Eine minimale Anzahl von Spülbädern und generell niedrigere Temperaturen der Färbe-, Spül- und Seifbäder tragen zu effizienten wasser- und energiesparenden Färbeprozessen bei.

  • Reaktivfarbstoffe für wasser- und energiesparende Färbeprozesse mit stark verkürzten Prozesszeiten

BEZAKTIV ONE deckt ein breites Spektrum an außergewöhnlich starken Farbstoffen ab. Dies ermöglicht kosteneffiziente Färbeprozesse mit weniger Farbstoff und Salz. Das ausgezeichnete Auswaschverhalten ermöglicht kurze Spülprozesse bei tiefer Temperatur und bietet dadurch einen weiteren ökonomischen und ökologischen Vorteil. Die Farbstoffe eignen sich durch ihre gute Mehrfachwaschechtheit besonders für langlebige Textilien.

Zellulosefasern werden häufig mit Reaktivfarbstoffen gefärbt, da diese in einer Vielzahl von Farben kommerziell erhältlich sind und Färbungen mit hoher Waschechtheit ergeben. Reaktivfärbungen benötigen durch die notwendigen Spülprozesse jedoch viel Wasser. Aufgrund der gestiegenen ökologischen Anforderungen ist die Entwicklung energie- und wassersparender Verfahren eine Kernanforderung an neue Farbstoffe.

Eine minimale Anzahl von Spülbädern und generell niedrigere Temperaturen der Färbe-, Spül- und Seifbäder tragen zu effizienten wasser- und energiesparenden Färbeprozessen bei.

BEZAKTIV ONE Farbstoffe können zwischen 40 und 60 °C gefärbt, gespült und geseift werden. Daher ist der Ausziehfärbeprozess im Vergleich zu herkömmlichen Reaktivfärbeverfahren, bei denen Temperaturen zwischen 60 und 98 °C erforderlich sind, deutlich kürzer. Dieser Vorteil bedeutet für den Textilfärber Einsparungen bei der Prozesszeit und eine höhere Produktivität.

Besonders deutlich werden die Vorteile des Verfahrens bei mittleren bis dunklen Farbtönen. Durch die Kombination von hohem Fixiergrad und gutem Farbaufbau können insbesondere dunkle Nuancen mit geringeren Farbstoff-Einsatzmengen als mit herkömmlichen bifunktionellen Reaktivfarbstoffen erreicht werden. Durch die Zugabe des Hilfsmittels COTOBLANC SEL im zweiten Seifbad ergibt sich ein zusätzlicher positiver Effekt, so dass ein Waschprozess mit geringem Wasser- und Energieaufwand zu hervorragenden Nassechtheiten auf dem Textil führt.

Source:

CHT

24.02.2023

Kelheim Fibres und SUMO: Absorbent pads for washable diapers

Kelheim Fibres and SUMO are presenting their high-performance absorbent pads for the reusable Sumo diaper at this year's Cellulose Fibres Conference. The Sumo diaper is a sustainable and washable cloth diaper made entirely from biobased materials, offering high performance and innovative design.

The Sumo diaper offers a reusable alternative, consisting of a waterproof shell and absorbent pads. To enhance the performance of the pads, Sumo collaborated with Kelheim Fibres, a leading viscose specialty fibre manufacturer with decades of experience in the hygiene sector.

Together with the Saxon Textile Research Institute STFI, Sumo and Kelheim Fibres have developed a high-performance absorbent pad that is free of fossil-based materials and has already been awarded the Techtextil Innovation Award. The basis for the innovative construction are Kelheim's functionalized specialty viscose fibres with modified cross-sections, which ensure particularly high absorbency and extremely low rewet values.

Kelheim Fibres and SUMO are presenting their high-performance absorbent pads for the reusable Sumo diaper at this year's Cellulose Fibres Conference. The Sumo diaper is a sustainable and washable cloth diaper made entirely from biobased materials, offering high performance and innovative design.

The Sumo diaper offers a reusable alternative, consisting of a waterproof shell and absorbent pads. To enhance the performance of the pads, Sumo collaborated with Kelheim Fibres, a leading viscose specialty fibre manufacturer with decades of experience in the hygiene sector.

Together with the Saxon Textile Research Institute STFI, Sumo and Kelheim Fibres have developed a high-performance absorbent pad that is free of fossil-based materials and has already been awarded the Techtextil Innovation Award. The basis for the innovative construction are Kelheim's functionalized specialty viscose fibres with modified cross-sections, which ensure particularly high absorbency and extremely low rewet values.

To ensure the washability of the product, needle-punched/thermally bonded nonwovens were chosen, consisting of a mixture of specialty viscose and PLA bicomponent fibres. By combining nonwovens, typically used in single-use applications, with reusable products, the partners have chosen a new approach.

Natalie Wunder, project manager at Kelheim Fibres, and Luisa Kahlfeldt, founder and designer of SUMO, explain in their joint presentation at the Cellulose Fibre Conference how open innovation has led to successful development collaboration, how this response to current consumer needs has emerged, and what steps are planned for the future.

Source:

Kelheim Fibres GmbH

24.01.2023

Ministry of Textiles again supports Techtextil India

Techtextil India is scheduled to take place between 12 – 14 September, 2023 in Mumbai. The continued support from the Ministry of Textiles demonstrates the huge emphasis laid for this key sector in boosting the economy of the country given the enormous scope to grow rapidly apart from the remarkable opportunities present to do business in India.
 
Techtextil India is the country’s leading trade fair on technical textiles, non-wovens, fibres, yarns and machinery. With almost eight months to go, the three-day business event has received an overwhelming response from various companies who will be seen showcasing their latest solutions and products for key application areas.
 

Techtextil India is scheduled to take place between 12 – 14 September, 2023 in Mumbai. The continued support from the Ministry of Textiles demonstrates the huge emphasis laid for this key sector in boosting the economy of the country given the enormous scope to grow rapidly apart from the remarkable opportunities present to do business in India.
 
Techtextil India is the country’s leading trade fair on technical textiles, non-wovens, fibres, yarns and machinery. With almost eight months to go, the three-day business event has received an overwhelming response from various companies who will be seen showcasing their latest solutions and products for key application areas.
 
Commenting on the developments, Mr Raj Manek, Executive Director and Board Member, Messe Frankfurt Asia Holdings Ltd, shared: “We are elated to have received the support from the Ministry of Textiles, Government of India and believe that it will bring in strong value to the technical textiles segment of our trade fair while opening doors to lucrative business engagements for the industry. We are optimistic that it will gain for us a wider reach and increase our credibility among the industry.”
 
The last edition of Techtextil India in November 2021 emerged as a crucial meeting place for the technical textile players. Even though the show happened to be the first post lockdown edition it garnered an attendance of 4,087 visitors due to live demonstration of latest products and technologies from over 150 technical textile brands.

Source:

Messe Frankfurt (HK) Limited

(c) POLARYSE
18.11.2022

Grand Largue Composites and Sicomin enable flax-fibre-built Racing Yacht

Fibres, fabrics, epoxy resins and adhesives from Sicomin have been used by Grand Largue Composites (GLC) to construct the first Class40 racing yacht to feature a significant quantity of flax-fibre reinforcements.
The yacht, called Crosscall, won the Class40 World Championships in June 2022 and is a prototype of the new Lift V2 design by Marc Lombard, one of the leading naval architects in this field.

Class40 is one of the most competitive fleets in yacht racing. The hulls of Class40 yachts must be light in weight, strong and stiff, and durable in the most extreme of conditions. Furthermore, to keep costs down, they cannot be reinforced with carbon fibres. The quality and reliability of the resins used for the infusion and lamination of the hulls are therefore of paramount importance.

Fibres, fabrics, epoxy resins and adhesives from Sicomin have been used by Grand Largue Composites (GLC) to construct the first Class40 racing yacht to feature a significant quantity of flax-fibre reinforcements.
The yacht, called Crosscall, won the Class40 World Championships in June 2022 and is a prototype of the new Lift V2 design by Marc Lombard, one of the leading naval architects in this field.

Class40 is one of the most competitive fleets in yacht racing. The hulls of Class40 yachts must be light in weight, strong and stiff, and durable in the most extreme of conditions. Furthermore, to keep costs down, they cannot be reinforced with carbon fibres. The quality and reliability of the resins used for the infusion and lamination of the hulls are therefore of paramount importance.

Crosscall's cockpit was designed to be effectively non-structural, with the mainsheet, which can generate huge shock loads, supported separately. This would allow the cockpit to be made from a hybrid biaxial fabric comprising 50% flax fibres. Other parts of the boat that incorporate flax fibre include the tunnel, the engine cover, the ballast tanks and the cap. The rest of the boat is reinforced with 100% glass-fibre fabrics.

To help it realise this ambitious design, GLC, an infusion specialist, turned to its long-time material supplier, Sicomin. The hull was moulded and infused in one piece and the deck – including the hybrid flax-fibre cockpit – was also infused as a single part. The internal structure was then laminated into the hull by hand before the hull and deck were finally bonded together.

The infusion resin selected was Sicomin’s SR 1710, a high-modulus structural epoxy. Designed specifically for use in infusion and injection processes, it has exceptionally low viscosity and its low-reactivity hardener makes it suitable for the production of large parts. Composites components made from SR 1710 possess high interlaminar shear-strength and the resin retains its mechanical properties in wet environments.

Sicomin’s low-toxicity SR 8200 was used to laminate the internal structures onto the skin of the hull. Ideal for hand laminating, this system includes a choice of hardeners with a wide range of reactivities, which makes it equally suitable for making large or small parts. The hull and deck were joined together with Sicomin’s Isobond SR 7100, which demonstrates high fatigue strength and is very resistant to microcracking.

An epoxy bonding primer – called Undercoat EP 215 HB+ and supplied by Sicomin’s sister company, Map Yachting – was applied to the moulds first to make demoulding easier. It also serves as an undercoat in the polyurethane exterior paint system that is used instead of gelcoat to protect the epoxy hull from UV damage.

Since the launch of Crosscall, GLC has started building a second Lift V2 Class40 and a third one is now planned, both for which Sicomin will supply the materials.

Source:

Sicomin / 100% Marketing

16.11.2022

CHT: From plastic waste to textile finishing: ARRISTAN rAIR

  • made out of recycled PET flakes and recyclable again
  • suited for finishing recycled yarns and fabrics
  • moisture management in sports and active wear

For the sustainable use of resources, the CHT Group has developed the product ARRISTAN rAIR, according to the principles of the circular economy. Here, plastic waste is converted into a valuable textile finishing product to achieve, for example, optimal moisture management in sports and active wear. Other areas of application include socks and tights in the clothing sector, filtration media and nonwovens in the technical textiles sector, and pillows and curtains in home textiles.

Since ARRISTAN rAIR is made out of recycled PET flakes, it is suited for finishing recycled yarns and fabrics which are subsequently recyclable again.

The hydrophilizing agent ARRISTAN rAIR is characterized by its fast-drying properties in combination with excellent soil release and thermoregulation. It therefore offers, especially in the field of functional textiles, optimal functionalities for high-quality and durable sportswear.

  • made out of recycled PET flakes and recyclable again
  • suited for finishing recycled yarns and fabrics
  • moisture management in sports and active wear

For the sustainable use of resources, the CHT Group has developed the product ARRISTAN rAIR, according to the principles of the circular economy. Here, plastic waste is converted into a valuable textile finishing product to achieve, for example, optimal moisture management in sports and active wear. Other areas of application include socks and tights in the clothing sector, filtration media and nonwovens in the technical textiles sector, and pillows and curtains in home textiles.

Since ARRISTAN rAIR is made out of recycled PET flakes, it is suited for finishing recycled yarns and fabrics which are subsequently recyclable again.

The hydrophilizing agent ARRISTAN rAIR is characterized by its fast-drying properties in combination with excellent soil release and thermoregulation. It therefore offers, especially in the field of functional textiles, optimal functionalities for high-quality and durable sportswear.

Source:

CHT Germany GmbH

08.09.2022

Kelheim Fibres at the Global Fiber Congress 2022 in Dornbirn

Shorter product life cycles and rapid technological progress are changing the product landscape at an ever-faster pace. The ability to anticipate future changes and to proactively shape the change is therefore an increasingly decisive competitive factor for modern companies. Trends are considered to be important indicators of impending

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, stands out in the industry not least for its innovative strength, as evidenced by numerous awards such as the Techtextil Innovation Award 2022 in the “New Concept” category. At this year’s Global Fiber Congress Dornbirn, Innovation Manager Ilka Kaczmarek will give an insight into the innovation management of the Bavarian fibre experts in her presentation “Trend Management meets Open Innovation: Best Practice Examples from Kelheim”. Ilka Kaczmarek will show how successful product solutions were developed in a short time by focusing on customer needs and working closely with partners along the value chain.

Shorter product life cycles and rapid technological progress are changing the product landscape at an ever-faster pace. The ability to anticipate future changes and to proactively shape the change is therefore an increasingly decisive competitive factor for modern companies. Trends are considered to be important indicators of impending

Kelheim Fibres, a leading manufacturer of viscose speciality fibres, stands out in the industry not least for its innovative strength, as evidenced by numerous awards such as the Techtextil Innovation Award 2022 in the “New Concept” category. At this year’s Global Fiber Congress Dornbirn, Innovation Manager Ilka Kaczmarek will give an insight into the innovation management of the Bavarian fibre experts in her presentation “Trend Management meets Open Innovation: Best Practice Examples from Kelheim”. Ilka Kaczmarek will show how successful product solutions were developed in a short time by focusing on customer needs and working closely with partners along the value chain.

Natalie Wunder, Project Manager at Kelheim Fibres, will explain one of these examples in detail in her presentation “Development of Menstruation Pants using Speciality Viscose Fibres”. Based on the current trend and the desire of end customers for reusable products, Kelheim Fibres was able to develop a washable and thus reusable, yet bio-based solution for feminine hygiene products.

Source:

Kelheim Fibres

Photo: FET
02.08.2022

FET at Techtextil 2022: Principle theme was Sustainability

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

The company’s principle theme at Techtextil was Sustainability, since FET extrusion systems are ideally suited for both process and end-product development of sustainable materials. These systems are designed to be material efficient, can be bespoke designed and offer both flexibility and a high level of processing capability. They are supplied as self-contained units for ease of installation in a laboratory or small scale process evaluation environment.

FET’s enhanced Fibre Development Centre enables clients to develop and trial their own sustainable fibres and FET has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats

The innovative stand at Techtextil was specifically designed to highlight FET’s total commitment to all aspects of sustainability. It utilised as many sustainable components as possible and met with much comment and approval from visitors.

Fibre Extrusion Technology Limited (FET) of Leeds, England enjoyed another successful Techtextil in Frankfurt, with high quality enquiries from technical companies and organisations worldwide, but in particular from customers based in Europe.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

13.07.2022

VUB: Hybrid threads based on ultrafine metallic micro-wires

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

After three years, VUB a.s again got the chance to actively participate in the European trade fair Techtextil 2022m being present at a joint stand of Czech companies active in production and application of technical textiles, organized by Clutex - Cluster Technical Textiles.

In cooperation with partners from academic and production sphere many products were developed over the past years, sold by VUB under the brand Clevertex. For the presentation at the fair, a wide range of ESD protective clothing for the electrotechnical industry and for each worker dealing with electrostatic discharge sensitive components was on display. As well as another product line of the Clevertex brand representing wearable skincare textile products with antiseptic effects based on purely natural textile materials.

Attention was paid to the advanced solutions for smart textiles and e-textiles products esp. electrically conductive hybrid threads based on ultrafine metallic micro-wires. A significant advantage of these threads lies in their full compatibility with standard textile manufacturing processes, and possibility of customization in terms of fineness, electrical conductivity and temperature resistance of individual thread. As an example of one of the applications of conductive threads, different types of woven elastic conductive ribbons were demonstrated, which could be used as bus bars or as textile conductors wherever a variable length of conductive element is required without the negative influence on their electrical resistance during the change the length.

More information:
VUB micro-wires
Source:

VÚB a.s.
 

© Natalie Wunder
From left: Patrick Engel (STFI), Caspar Böhme (Sumo), Ilka Kaczmarek (KF), Dr. Marina Crnoja-Cosic (KF)
22.06.2022

Kelheim Fibres wins Techtextil Innovation Award

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

The viscose specialities manufacturer Kelheim Fibres has won the Techtextil Award in the "New Concept" category for their project "Cellulose-based nonwovens for highly absorbent reusable products".
This award is intended to make cutting-edge developments visible, promote unconventional thinking and intensify the dialogue between researchers, manufacturers.

The starting point for the innovation was the search for a washable and thus reusable absorbent pad made of completely bio-based materials for the cloth diaper of the Berlin-based start-up Sumo.
Two main requirements of the application are obvious: A fast and efficient liquid distribution and high absorbency should minimise rewetting and leakage. Both are ensured by speciality viscose fibres from Kelheim, which have been making this essential contribution to absorbent hygiene products such as tampons for many years. The obvious solution was therefore to optimally utilise the synergies between knitted and woven structures with nonwovens.

In doing so, the advantages of nonwovens in combination with speciality viscose fibres in terms of absorbency (through e.g. more open-pored structures) have been perfectly transferred from the field of disposable to the world of reusable products. For reusable products, however, there is another challenge to overcome: they must remain stable during washing and over several cycles of use. To ensure this, an innovative nonwoven construction was developed in close cooperation with the STFI. These nonwovens can be used as a stand-alone solution or integrated into a textile structure.

Source:

Kelheim Fibres