From the Sector

Reset
41 results
26.03.2024

CARBIOS joins Paris Good Fashion

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS, a pioneer in the development and industrialization of biological technologies to reinvent the life cycle of plastic and textiles, announces its membership to Paris Good Fashion, the association that unites over 100 French players in the sector - brands, designers and experts - around their commitment to sustainable fashion. CARBIOS is the first recycling technology supplier to join, demonstrating the importance given to recycling to achieve textile circularity. By contributing its solution for the biorecycling of polyester, the world's most widely used and fastest-growing textile fiber, CARBIOS aims to contribute Paris Good Fashion’s mission, which focuses on concrete actions, best practice sharing and collective intelligence to accelerate change in the fashion industry.

CARBIOS will be particularly involved in the association's project to set up a working group dedicated to the development of a "fiber-to-fiber" industry, one of Paris Good Fashion's top priorities over the next five years. While only 1% of textiles are currently recycled fiber-to-fiber (circular), this working group will identify levers for significantly increasing the share of recycled fibers in the industry.  Polyester currently follows a linear model from which we need to break out: virgin polyester is made from petroleum, and recycled polyester from PET bottles. After use, most of these products end their lives in landfill or incineration. A circular, "fiber-to-fiber" industry will give new life to textiles and reduce the environmental impact associated to their end-of-life management.

Source:

Carbios

Konzept Recycling Center Grafik: Sächsisches Textilforschungsinstitut e.V. (STFI)
20.03.2024

Abschlussmeeting im SmartERZ-Projekt TRICYCLE

Im Februar fand im Sächsischen Textilforschungsinstitut e. V. (STFI) in Chemnitz das Abschlussmeeting des Verbundprojekts „TRICYCLE – Entwicklung und Konzeptionierung eines SmartERZ Smart Composites Recycling Centers“ statt. TRICYCLE ist ein Projekt des disziplinübergreifenden Innovationsvorhaben SmartERZ aus dem Erzgebirge, welches durch das Bundesministerium für Bildung und Forschung (BMBF) im Programm „WIR! – Wandel durch Innovation in der Region“ gefördert wird. SmartERZ ist ein branchenübergreifendes Technologiebündnis zur Entwicklung von funktionsintegrierten Faserverbundwerkstoffen.

Im Februar fand im Sächsischen Textilforschungsinstitut e. V. (STFI) in Chemnitz das Abschlussmeeting des Verbundprojekts „TRICYCLE – Entwicklung und Konzeptionierung eines SmartERZ Smart Composites Recycling Centers“ statt. TRICYCLE ist ein Projekt des disziplinübergreifenden Innovationsvorhaben SmartERZ aus dem Erzgebirge, welches durch das Bundesministerium für Bildung und Forschung (BMBF) im Programm „WIR! – Wandel durch Innovation in der Region“ gefördert wird. SmartERZ ist ein branchenübergreifendes Technologiebündnis zur Entwicklung von funktionsintegrierten Faserverbundwerkstoffen.

Im Vorhaben wurde ein technologisches Recyclingkonzept für die zukünftig entstehenden smarten Produkte sowie die in der Produktion entstehenden Abfälle in der Region entwickelt. Ziel war die Entwicklung standardisierter, skalierbarer Verfahren, mit größtmöglichem Automatisierungsgrad unter Einhaltung der geltenden Gesetze, Verordnungen und Normen. Das Projekt lief vom 01.09.2021 bis 31.12.2023. Im Abschlussmeeting einer 28-monatigen Projektarbeit wurden den Teilnehmenden die Ergebnisse vorgestellt. Die Arbeit beinhaltet das Centerkonzept sowie eine Datenerhebung zu potenziell regional verfügbaren Mengen und anschließenden Verwertungsoptionen sowie die Entwicklung gewisser Designrichtlinien für das Recycling.

Eingegossen in die bestehenden Strukturen der SmartERZ Region und darüber hinaus, ist das Konzept für ein Center entstanden, welches als eine Art Drehkreuz für regionale Abfälle rund um diese Thematik fungieren soll. Darüber können Abfallströme gesammelt, erstbehandelt und für das rohstoffliche Recycling vorbereitet werden. Die Erstbehandlung schließt Technologien der Qualitätskontrolle/Qualitätsmanagement, Zerkleinerung, Pelletierung und Kompaktierung ein. Über dieses Drehkreuz sollen auch Kleinstmengen wirtschaftlich attraktiven Verwertungswegen und einer Weiterverwendung zugänglich gemacht werden.

Neben der stofflichen Vernetzung beinhaltet das Konzept für das Recycling Center die Voraussetzungen um als Vernetzungsstelle rund um die Thematik (textiler) Kreislaufwirtschaft zu fungieren. Unternehmen, Forschung, Lehre und öffentliche Einrichtungen können und sollen in Diskurs treten, um die bestmöglichen Verwertungsoptionen für entsprechende Abfälle zu finden, aber auch die Vermeidung und Wiederverwendung von Abfällen voranzutreiben, langlebige Produkte zu schaffen und Wissen zu teilen.

Die Projektpartner stimmen überein, dass nun nach Wegen gesucht werden muss, um das entstandene Konzept umzusetzen. Zusätzlich bahnen sich bereits Kooperationen mit anderen Forschungsvorhaben an. Johannes Leis als Projektleiter TRICYCLE und Dr. Stefan Minar seitens des Projekts WIRreFa sehen nun die Chance, gar die Notwendigkeit, die offensichtlichen Schnittstellen beider Projekte so schnell wie möglich zusammenzubringen. Vielleicht noch während der zweiten Phase des Projektes WIReFa.

More information:
SmartErz TRICYCLE STFI BMBF Recycling
Source:

P3N MARKETING GMBH

Stoffstrombild Kunststoffe 2024: Start der Datenerhebung (c) bvse
05.03.2024

Stoffstrombild Kunststoffe 2024: Start der Datenerhebung

Ein Bündnis von Organisationen entlang der gesamten Kunststoff-Wertschöpfungskette, von den Herstellern, über die Anwender, bis hin zu der Recyclingbranche und den Industriegewerkschaften ruft seit 1997 alle zwei Jahre zur Teilnahme an der Studie "Stoffstrombild Kunststoffe" auf. Das Stoffstrombild Kunststoffe umfasst Daten zu Produktion, Verarbeitung, Verbrauch, Abfallaufkommen, Verwertung und Wiedereinsatz von Kunststoffen bis hin zum Wiedereinsatz der Recyclate in Deutschland. Das Stoffstrombild Kunststoffe genießt bei Politik, Behörden und Fachöffentlichkeit hohes Ansehen und zeigt, dass Kreislaufwirtschaft ein zentrales Thema für die deutsche Kunststoffbranche ist.

Die Ergebnisse des aktuellen Stoffstrombild Kunststoffe werden voraussichtlich im Oktober 2024 veröffentlicht. Teilnehmen können alle Unternehmen, die Kunststoffe herstellen, verarbeiten, für Endprodukte einsetzen sowie deren Abfälle sammeln und verwerten oder die dafür notwendigen Maschinen herstellen. Die Datenerhebung erfolgt anonymisiert durch die Conversio Market & Strategy GmbH.

Ein Bündnis von Organisationen entlang der gesamten Kunststoff-Wertschöpfungskette, von den Herstellern, über die Anwender, bis hin zu der Recyclingbranche und den Industriegewerkschaften ruft seit 1997 alle zwei Jahre zur Teilnahme an der Studie "Stoffstrombild Kunststoffe" auf. Das Stoffstrombild Kunststoffe umfasst Daten zu Produktion, Verarbeitung, Verbrauch, Abfallaufkommen, Verwertung und Wiedereinsatz von Kunststoffen bis hin zum Wiedereinsatz der Recyclate in Deutschland. Das Stoffstrombild Kunststoffe genießt bei Politik, Behörden und Fachöffentlichkeit hohes Ansehen und zeigt, dass Kreislaufwirtschaft ein zentrales Thema für die deutsche Kunststoffbranche ist.

Die Ergebnisse des aktuellen Stoffstrombild Kunststoffe werden voraussichtlich im Oktober 2024 veröffentlicht. Teilnehmen können alle Unternehmen, die Kunststoffe herstellen, verarbeiten, für Endprodukte einsetzen sowie deren Abfälle sammeln und verwerten oder die dafür notwendigen Maschinen herstellen. Die Datenerhebung erfolgt anonymisiert durch die Conversio Market & Strategy GmbH.

Für die Lebenswegbetrachtung wurden zuletzt mehr als 2.000 Unternehmen aus Kunststofferzeugung, -verarbeitung und -verwertung befragt sowie amtliche und weitere Statistiken herangezogen. Um auch in diesem Jahr wieder eine hohe Abdeckung zu erreichen, werden in Kürze wieder Fragebögen versandt, Telefoninterviews geführt sowie Untersuchungen und Recherchen gestartet.

Das Stoffstrombild wird von der Conversio Market & Strategy GmbH erstellt. Auftraggeber der Studie ist die BKV GmbH mit Unterstützung von PlasticsEurope Deutschland e. V., der Bundesverband der Deutschen Entsorgungs-, Wasser- und Kreislaufwirtschaft e. V., der bvse-Bundesverband Sekundärrohstoffe und Entsorgung e. V., VDMA e.V. Kunststoff und Gummimaschinen, die IK – Industrievereinigung Kunststoffverpackungen e. V., der KRV – Kunststoffrohrverband e. V., VinylPlus Deutschland e.V., der GKV – Gesamtverband Kunststoffverarbeitende Industrie e. V. AVK – Industrievereinigung Verstärkte Kunststoffe e. V., FSK – Fachverband Schaumkunststoffe und Polyurethane e.V., TecPart – Verband Technische Kunststoff-Produkte e. V., pro-K Industrieverband langlebige Kunststoffprodukte und Mehrwegsysteme e. V., der IG BCE Industriegewerkschaft Bergbau, Chemie, Energie, sowie dem VCI – Verband der Chemischen Industrie e.V.

Source:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung e. V.

STFI: Lightweight construction innovations at JEC World in Paris (c) silbaerg GmbH and STFI (see information on image)
23.02.2024

STFI: Lightweight construction innovations at JEC World in Paris

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

At this year's JEC World, STFI will be presenting highlights from carbon fibre recycling as well as a new approach to hemp-based bast fibres, which have promising properties as reinforcement in lightweight construction.

Green Snowboard
At JEC World in Paris from 5 to 7 March 2024, STFI will be showcasing a snowboard from silbaerg GmbH with a patented anisotropic coupling effect made from hemp and recycled carbon fibres with bio-based epoxy resin. In addition to silbaerg and STFI, the partners Circular Saxony - the innovation cluster for the circular economy, FUSE Composite and bto-epoxy GmbH were also involved in the development of the board. The green snowboard was honoured with the JEC Innovation Award 2024 in the “Sport, Leisure and Recreation” category.

VliesComp
The aim of the industrial partners Tenowo GmbH (Hof), Siemens AG (Erlangen), Invent GmbH (Braunschweig) and STFI united in the VliesComp project is to bring recycled materials back onto the market in various lightweight construction solutions. The application fields "Innovative e-machine concepts for the energy transition" and "Innovative e-machine concepts for e-mobility" were considered as examples. On display at JEC World in Paris will be a lightweight end shield for electric motors made from hybrid nonwovens - a mixture of thermoplastic fibre components and recycled reinforcing fibres - as well as nonwovens with 100% recycled reinforcing fibres. The end shield was ultimately manufactured with a 100% recycled fibre content. The tests showed that, compared to the variant made from primary carbon fibres using the RTM process, a 14% reduction in CO2 equivalent is possible with the same performance. The calculation for the use of the prepreg process using a bio-resin system shows a potential for reducing the CO2 equivalent by almost 70 %.

Bast fibre reinforcement
To increase stability in the plant stem, bast fibres form in the bark area, which support the stem but, in contrast to the rigid wood, are very flexible and allow slender, tall plants to move in the wind without breaking.A new process extracts the bast bark from hemp by peeling.The resulting characteristic values, such as tensile modulus of elasticity, breaking strength and elongation, are very promising in comparison with the continuous rovings made of flax available on the market.The material could be used as reinforcement in lightweight construction.At JEC World, STFI will be exhibiting reinforcing bars that have been processed into a knitted fabric using a pultrusion process based on bio-based reinforcing fibres made from hemp bast for mineral matrices.

Source:

Sächsische Textilforschungsinstitut e.V. (STFI)

07.02.2024

The World of Wipes® International Conference 2024 Opens Registration

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration and tabletop exhibit reservations are open for the World of Wipes® (WOW) International Conference. WOW 2024 will take place June 17-20 at the Hyatt Regency Minneapolis, Minneapolis, MN. The theme for this year’s event is “Wipes Innovation & Sustainability – From Inception to Perfection.”

WOW will feature content in responsible sourcing, end-of-life solutions, and innovations in sustainability. Industry leaders, such as The Clorox Company, Kimberly-Clark Professional, and Nice-Pak, amongst others, will present their sustainability insights in formulations, industrial and institutional wipes, alternatives to plastics, production technologies, recycling options, and regulatory issues.

INDA, the Association of the Nonwoven Fabrics Industry, announced that registration and tabletop exhibit reservations are open for the World of Wipes® (WOW) International Conference. WOW 2024 will take place June 17-20 at the Hyatt Regency Minneapolis, Minneapolis, MN. The theme for this year’s event is “Wipes Innovation & Sustainability – From Inception to Perfection.”

WOW will feature content in responsible sourcing, end-of-life solutions, and innovations in sustainability. Industry leaders, such as The Clorox Company, Kimberly-Clark Professional, and Nice-Pak, amongst others, will present their sustainability insights in formulations, industrial and institutional wipes, alternatives to plastics, production technologies, recycling options, and regulatory issues.

More information:
WOW INDA international conference
Source:

INDA, Association of the Nonwoven Fabrics Industry

26.01.2024

bvse: Wechsel in der Verbandsspitze des Europäischen Dachverbands EuRIC

Mit einem weinenden und einem lachenden Auge sieht bvse-Hauptgeschäftsführer Eric Rehbock den Wechsel in der Verbandsspitze des Europäischen Dachverbands EuRIC zum 1. April. An der weiter erfolgreichen und effektiven Verbändezusammenarbeit hegt Rehbock allerdings keinen Zweifel.

„Mit Emmanuel Katrakis verlieren wir eine engagierte Führungspersönlichkeit, die in den letzten 10 Jahren hervorragende Arbeit für die Recyclingwirtschaft auf europäischer Ebene geleistet hat“, bedauert Rehbock. „Wir danken Herrn Katrakis herzlich für die intensive und konstruktive gemeinsame Arbeit und wünschen ihm alles erdenklich Gute für sein nächstes Betätigungsfeld“, so Rehbock.

Gleichzeitig freut sich der bvse-Verbandschef auf die Fortsetzung der ausgezeichneten Zusammenarbeit mit Julia Blees, die ab 1. April als Nachfolgerin von Katrakis die Position als EuRIC-Generalsekretärin übernehmen wird. Bereits seit Dezember 2018 steht Blees als Policy Officer in EuRIC auch dem bvse im Bereich des europäischen Abfallrechts hilfreich zur Seite.

Mit einem weinenden und einem lachenden Auge sieht bvse-Hauptgeschäftsführer Eric Rehbock den Wechsel in der Verbandsspitze des Europäischen Dachverbands EuRIC zum 1. April. An der weiter erfolgreichen und effektiven Verbändezusammenarbeit hegt Rehbock allerdings keinen Zweifel.

„Mit Emmanuel Katrakis verlieren wir eine engagierte Führungspersönlichkeit, die in den letzten 10 Jahren hervorragende Arbeit für die Recyclingwirtschaft auf europäischer Ebene geleistet hat“, bedauert Rehbock. „Wir danken Herrn Katrakis herzlich für die intensive und konstruktive gemeinsame Arbeit und wünschen ihm alles erdenklich Gute für sein nächstes Betätigungsfeld“, so Rehbock.

Gleichzeitig freut sich der bvse-Verbandschef auf die Fortsetzung der ausgezeichneten Zusammenarbeit mit Julia Blees, die ab 1. April als Nachfolgerin von Katrakis die Position als EuRIC-Generalsekretärin übernehmen wird. Bereits seit Dezember 2018 steht Blees als Policy Officer in EuRIC auch dem bvse im Bereich des europäischen Abfallrechts hilfreich zur Seite.

„Wir haben Frau Blees als tatkräftige Mitstreiterin für unsere Branche kennengelernt, die die Interessen der mittelständischen Mitgliedsunternehmen klug und energisch zu vertreten weiß. Gemeinsam werden wir uns auch in Zukunft auf europäischer und nationaler Ebene unermüdlich für gesetzliche Rahmenbedingungen einsetzen, die es der Recycling- und Abfallwirtschaft ermöglichen, wettbewerbsfähig zu sein, zu wachsen und zu reinvestieren“, betont Rehbock.

Source:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung e.V.

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

Graphic: ReHubs
05.12.2023

ReHubs: First General Assembly

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

During its first General Assembly, 18 European companies and organisations have formally joined ReHubs. They represent different segments of the circular textile value chain and share a common commitment to invest in textile recycling capacity in Europe. Additional partners are expected in the near future.

Current ReHubs partners are BASF, Boer Group, Coleo, Concordia Textiles, Decathlon, EURATEX, Gherzi Textil Organisation, Inditex, Indorama Ventures, Mango, PEPPER-i2, Purfi, Ratti, Recover, Refashion, Resortecs, Rester, RETEX.GREEN and TEXAID.

All partners will support ReHubs Executive Director, Chris Deloof, to kick start activities in the coming months. ReHubs partners will elaborate together on further steps and activities for the forthcoming work plan and the development of the European Textile Recycling Roadmap.

Chris Deloof commented: “I am delighted to see such a strong group of organisations teaming up with ReHubs. They are a great example of how to establish a new circular textile value chain in Europe. We need to focus now on rolling out ReHubs investment projects and further expanding our partners and investors network.”

More information:
ReHubs
Source:

ReHubs

bvse: Bewerbungsstart für »DIE GRÜNEN ENGEL 2024« (c) bvse-Bundesverband Sekundärrohstoffe und Entsorgung e.V.
04.12.2023

bvse: Bewerbungsstart für »DIE GRÜNEN ENGEL 2024«

Zur IFAT MUNICH 2024 wird erneut der Mittelstandspreis für das Recycling „DIE GRÜNEN ENGEL“ verliehen. Die Auszeichnung wegweisender Innovationsführer:innen findet traditionell auf dem bvse-Messeabend statt. Ab sofort beginnt die Bewerbungs- und Nominierungsphase.

Bis zum 31. Januar 2024 können sich Unternehmen oder Personen aus dem Umfeld der mittelständischen Recyclingbranche für den Mittelstandspreis „DIE GRÜNEN ENGEL 2024“ bewerben oder für den Preis nominiert werden.

Die Auslobung des Recycling-Awards durch den bvse-Bundesverband Sekundärrohstoffe und Entsorgung und die Unternehmensgruppe „DIE GRÜNEN ENGEL – Aufbereitungszentrum Nürnberg“ geht mittlerweile in die 5. Runde und hat sich seit seiner Premiere im Jahr 2014 über die Branchengrenzen hinaus als anerkannte Auszeichnung für nachhaltiges Handeln und Innovationsführerschaft etabliert.

Der Wettbewerb um den Mittelstandspreis findet in 3 Kategorien statt:

Zur IFAT MUNICH 2024 wird erneut der Mittelstandspreis für das Recycling „DIE GRÜNEN ENGEL“ verliehen. Die Auszeichnung wegweisender Innovationsführer:innen findet traditionell auf dem bvse-Messeabend statt. Ab sofort beginnt die Bewerbungs- und Nominierungsphase.

Bis zum 31. Januar 2024 können sich Unternehmen oder Personen aus dem Umfeld der mittelständischen Recyclingbranche für den Mittelstandspreis „DIE GRÜNEN ENGEL 2024“ bewerben oder für den Preis nominiert werden.

Die Auslobung des Recycling-Awards durch den bvse-Bundesverband Sekundärrohstoffe und Entsorgung und die Unternehmensgruppe „DIE GRÜNEN ENGEL – Aufbereitungszentrum Nürnberg“ geht mittlerweile in die 5. Runde und hat sich seit seiner Premiere im Jahr 2014 über die Branchengrenzen hinaus als anerkannte Auszeichnung für nachhaltiges Handeln und Innovationsführerschaft etabliert.

Der Wettbewerb um den Mittelstandspreis findet in 3 Kategorien statt:

  • Kategorie I „Innovative Recyclinglösungen“
    Bewerbung/Nominierung von Unternehmen, die operativ im Recycling tätig sind und mit neuen wegweisenden Lösungen und Aufbereitungsverfahren dazu beitragen, sowohl die Kreislaufwirtschaft als auch den Klima-, Umwelt- und Ressourcenschutz zu steigern.
  • Kategorie II „Zukunftsweisende Techniklösungen für das Recycling“
    Bewerbung/Nominierung von Dienstleistern/Maschinen- und Anlagenbauern, deren innovative Technologien, automatisierte Verfahren, Digital- oder Logistiklösungen dazu beitragen, Recyclingprozesse auf effektivste Weise auf ein neues Level zu heben.
  • Kategorie III „Lebenswerk“
    Nominierung von Personen (Innovatoren/Pionieren), die sich durch ihr Lebenswerk auszeichnen und sich in besonderer Weise um das Recycling verdient gemacht haben.

Aus dem Bewerber:innen-/Nominierten-Pool ermittelt eine Jury die Preisträger:innen aus den drei vorgenannten Kategorien. Im Wettbewerbspool berücksichtigt werden nicht nur aktive Bewerber:innen. Auch Unternehmen und Personen, die aufgrund ihrer besonderen Leistungen zur Förderung des Recyclings und der Kreislaufwirtschaft nominiert werden, nehmen an der Ausschreibung um den mittelständischen Recyclingpreis teil.

Das sind die maßgeblichen Bewertungskriterien für die Auswahl der Wettbewerbsgewinner:innen:

  • Nutzen: Bietet Problemlösung
  • Weiterentwicklung von bestehenden Lösungen
  • Alleinstellungsmerkmal: Abgrenzung gegenüber bisherigen Ansätzen
  • Skalierbarkeit
  • Wirtschaftliches Potenzial: messbare, bereits anerkannte oder absehbare Markterfolge

Die Enthüllung und Auszeichnung der Preisträger:innen in drei Kategorien findet im Rahmen des bvse-Messeabends am 15. Mai 2024 im Hofbräukeller am Wiener Platz in München statt.

Source:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung e.V.

(c) AVK - Industrievereinigung Verstärkte Kunststoffe e. V.
14.11.2023

Successful SMCCreate 2023 Design Conference in Prague

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

Successful SMCCreate 2023 Design Conference in Prague

With over 60 participants from Europe and the USA the second edition of the SMCCreate Design Conference took place from November 7th to 8th in Prague. The conference was jointly organized by the AVK – Federation of Reinforced Plastics and the European Alliance for SMC BMC, promoting the use of SMC and providing design tools to designers for applying these versatile materials.

During the SMCCreate 2023 conference topics covered the wide spectrum of the design with fiber composite/composite components in SMC and BMC technology, from conceptual design, development, and scale-up, with a special emphasis on recycling and sustainability solutions. 18 speakers from various European countries showed how they address important market trends and changing customer needs, and which solutions their companies offered in terms of materials, performance and much more.

As an introduction, speakers - including CTC/Airbus and Teijin - presented different possible applications for SMC and BMC components, including aircraft interiors, bicycle boxes, and applications in e-mobility. The topic of sustainability was broadly covered, highlighting recycling solutions and experiences (Siemens, IDI, OC, AOC), the use of renewable raw materials, as well new LCA models developed by the SMC BMC Alliance (LCS),

Specifically for designers, the use of the SMC flow and curing modelling was presented (ESI, OC), SMC positioning vs. aluminium (Spartners). The second day concluded with contributions on process optimization options for component production, including speeches by Dieffenbacher, Netzsch and EBG.

Source:

AVK - Industrievereinigung Verstärkte Kunststoffe e. V.

Winners of AVK Innovation Award 2023 (c) AVK
Winners of AVK Innovation Award 2023
25.10.2023

Winners of AVK Innovation Award 2023

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

The winners of the prestigious Innovation Award for Fibre-Reinforced Plastics of the AVK, the German Federation of Reinforced Plastics, were presented in Salzburg this year. This award always goes to businesses, institutions and their partners for outstanding innovations in composites the three categories Products & Applications, Processes & Methods and Research & Science. Projects are submitted in all three categories and are evaluated by a jury of experts in engineering and science as well as trade journalists, who look at each project in terms of their levels of innovation, implementation and sustainability.

Products & Applications category
First place: “Insulating Coupling Shaft for Rail Vehicles” – Leichtbauzentrum Sachsen GmbH, partner: KWD Kupplungswerk Dresden GmbH

Second place: “Electric Car Battery Housing Components Based on Innovative Continuous Fibre-Reinforced Phenolic Resin Composites” – SGL Carbon

Third place: “High Performance Recycled Carbon Fibre Materials (HiPeR)” – Composites Technology Center GmbH (CTC GmbH), partners: Faserinstitut Bremen e. V, Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; partners Japan: Faserinstitut Bremen e.V., Sächsisches Textilforschungsinstitut e.V., C.A.R. FiberTec GmbH; Partner Japan: CFRI Carbon Fiber Recycle Industry Co., Ltd., IHI Logistics and Machinery Corporation, ICC Kanazawa Institute of Technology

Innovative Processes & Methods category
First place: “Chopped Fibre Direct Processing (CFP)” – KraussMaffei Technologies GmbH, partner: Wirthwein SE

Second place: “CIRC - Complete Inhouse Recycling of Thermoplastic Compounds” – Fraunhofer Institute for Production Engineering and Automation (IPA), partners: Schindler Handhabetechnik GmbH, Vision & Control GmbH

Third place: “CarboScreen – Sensor-Based Monitoring of Carbon-Fibre Production” – CarboScreen GmbH, partner: Institute of Textile Technology at RWTH Aachen University

Research & Science category
First place: “Development of a Stereocomplex PLA Blend on a Pilot Plant Scale” – Faserinstitut Bremen e. V.

Second place: “Fibre-Reinforced Salt as a Robust Lost Core Material” – Technical University of Munich, Chair of Carbon Composites, partners: Apppex GmbH, Haas Metallguss GmbH

Third place: “VliesSMC – Recycled Carbon Fibres with a Second Life in the SMC Process” – Sächsisches Textilforschungsinstitut e.V. (STFI), partner: Fraunhofer Institute for Chemical Technology (ICT)

 

Entries for the next Innovation Award 2024 can be submitted from January 2024 onwards.

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V.

Hygienix Graphics INDA
05.10.2023

Glatfelter, Mundeo, and Sequel to Vie for Hygienix Innovation Award™

INDA, the Association of the Nonwoven Fabrics Industry, revealed the three finalists that will compete for the Hygienix Innovation Award™. Glatfelter, Mundeo, and Sequel will present their new absorbent hygiene products to senior-level leaders at Hygienix, Nov. 13-16, New Orleans, Louisiana.

Here is a summary of the finalists’ products:

Glatfelter: GlatPure™
GlatPure™ is a range of bio-based absorbent hygiene components derived from renewable materials. This product range consists of a variety of plant-based and natural topsheets, an acquisition distribution layer, an absorbent core, a newly improved backsheet, and a landing zone. Crafted from 100% renewable fibers and biodegradable materials, and enriched with bio-based binders, GlatPure™ stands as the industry’s first fully functional, fossil-fuel free range of solutions.  

INDA, the Association of the Nonwoven Fabrics Industry, revealed the three finalists that will compete for the Hygienix Innovation Award™. Glatfelter, Mundeo, and Sequel will present their new absorbent hygiene products to senior-level leaders at Hygienix, Nov. 13-16, New Orleans, Louisiana.

Here is a summary of the finalists’ products:

Glatfelter: GlatPure™
GlatPure™ is a range of bio-based absorbent hygiene components derived from renewable materials. This product range consists of a variety of plant-based and natural topsheets, an acquisition distribution layer, an absorbent core, a newly improved backsheet, and a landing zone. Crafted from 100% renewable fibers and biodegradable materials, and enriched with bio-based binders, GlatPure™ stands as the industry’s first fully functional, fossil-fuel free range of solutions.  

Mundao: Diap’Earth®
From nature to nature: Mundao brings to market DIAP’EARTH®, an industrially compostable baby diaper. This diaper provides a circular solution to the AHP waste issue. Ecoconception (DIAP’EARTH is a bio-based & plastic free diaper) makes it possible to compost the diaper in an industrial composting facility to turn it into carbon where it can become fertilizer for soil. DIAP’EARTH has been successfully composted in major French cities.

Sequel: The Sequel Spiral™ Tampon
The Sequel Spiral™ Tampon features a proprietary spiral design that is engineered to be more fluid mechanically efficient, meaning it is designed to absorb more evenly and not leak before it’s full. In August 2023 the Sequel Spiral™ Tampon received clearance from the United States Food and Drug Administration (FDA) as a medical device and the company will now begin a series of consumer trials, with broad availability expected in Q1 of 2024.

The winner of the Award will be announced at the end of the event, Thurs., Nov. 16th, at 11:30 am. Last year’s award recipient was Pads on a Roll™ by Egal Pads. Pads on a Roll is a wrapped super-thin absorbent period pad that dispenses like toilet paper in public bathroom stalls, preventing the personal embarrassment of not having a menstrual product when needed.

Conference Highlights
In addition to the award presentation, the Hygienix™ conference will focus on consumer-centric innovations, the circular economy, raw material advancements in sustainability, opportunities for advanced recycling in absorbent hygiene, optimizing the packaging footprint, new approaches for odor control, and market trends and drivers. Plus, INDA’s Government Affairs office will be in attendance to provide insights into recent regulatory and legislative issues. Participants can learn about how the current political landscape could affect the nonwovens industry.

More information:
Hygienix
Source:

INDA

04.10.2023

Official launch of ReHubs Europe

At a kick off meeting hosted by Mango, EURATEX and 20 incoming members presented ReHubs Europe, a new international non-profit organisation poised to give a boost to the textile recycling. The launch follows three years of intense preparation, and the publication of a Techno-Economic Study, which analysed the business case, cost and environmental benefits for upscaling textile waste recycling in Europe.

ReHubs Europe will gather key players from the textile value chain - textile manufacturers, fashion brands, collectors and recyclers, chemical industry, technology providers - who welcome the ReHubs joint ambition to recycle 2.5 million tons of textile waste by 2030. This requires up to 250 industrial projects across Europe, covering different types of fibre-to-fibre recycling.

ReHubs Europe is the industry’s response to the upcoming EU legislation, which sets compulsory collection and sorting of textile waste, by 2025. To manage this, an upscale of recycling capacity is needed as well as a collaboration of different players from the value chain.

At a kick off meeting hosted by Mango, EURATEX and 20 incoming members presented ReHubs Europe, a new international non-profit organisation poised to give a boost to the textile recycling. The launch follows three years of intense preparation, and the publication of a Techno-Economic Study, which analysed the business case, cost and environmental benefits for upscaling textile waste recycling in Europe.

ReHubs Europe will gather key players from the textile value chain - textile manufacturers, fashion brands, collectors and recyclers, chemical industry, technology providers - who welcome the ReHubs joint ambition to recycle 2.5 million tons of textile waste by 2030. This requires up to 250 industrial projects across Europe, covering different types of fibre-to-fibre recycling.

ReHubs Europe is the industry’s response to the upcoming EU legislation, which sets compulsory collection and sorting of textile waste, by 2025. To manage this, an upscale of recycling capacity is needed as well as a collaboration of different players from the value chain.

Chris Deloof will lead ReHubs Europe as Executive Director. Chris has a long-standing experience in the textile sector and is a passionate advocate for cross-industry collaboration. Moreover, Chris is deeply committed to driving the transition towards a circular economy, which aligns seamlessly with ReHubs Europe's mission.

ReHubs Europe will operate from Brussels, in close partnership with EURATEX. Membership is open to any companies who wish to invest in textile waste recycling in Europe.

Source:

Euratex

Association of the Nonwoven Fabrics Industry INDA
22.08.2023

INDA Announces Conference Program for Hygienix™ 2023

INDA, the Association of the Nonwoven Fabrics Industry, announced the conference program for Hygienix™ 2023, November 13-16 to be held at The Roosevelt New Orleans Hotel, New Orleans, LA.

The program details can be found on the Hygienix website.

The keynote speaker is Courtney Scharf, Chief Client Officer, Trend Hunter. Trend Hunter leverages big data, human researchers, and AI to identify consumer insights, and deep dive opportunities for the world’s most innovative companies, such as Unilever, Colgate-Palmolive, Georgia-Pacific, Kroger, Johnson & Johnson, Reckitt Benckiser, Samsung, and Bacardi. Trend Hunter utilizes Artificial Intelligence and research to identify and curate top insights and trends to advise brands and businesses in their pursuit of innovation.

The Hygienix program will feature thought leaders in consumer-centric innovations, the circular economy, raw material advancements in sustainability, opportunities for advanced recycling in absorbent hygiene, optimizing the packaging footprint, new approaches for odor control, and market trends and drivers.

Experts presenting at Hygienix include:

INDA, the Association of the Nonwoven Fabrics Industry, announced the conference program for Hygienix™ 2023, November 13-16 to be held at The Roosevelt New Orleans Hotel, New Orleans, LA.

The program details can be found on the Hygienix website.

The keynote speaker is Courtney Scharf, Chief Client Officer, Trend Hunter. Trend Hunter leverages big data, human researchers, and AI to identify consumer insights, and deep dive opportunities for the world’s most innovative companies, such as Unilever, Colgate-Palmolive, Georgia-Pacific, Kroger, Johnson & Johnson, Reckitt Benckiser, Samsung, and Bacardi. Trend Hunter utilizes Artificial Intelligence and research to identify and curate top insights and trends to advise brands and businesses in their pursuit of innovation.

The Hygienix program will feature thought leaders in consumer-centric innovations, the circular economy, raw material advancements in sustainability, opportunities for advanced recycling in absorbent hygiene, optimizing the packaging footprint, new approaches for odor control, and market trends and drivers.

Experts presenting at Hygienix include:

  • Aquapak Polymers Ltd. – “Creating Sustainable Nonwovens for Hygiene Applications with Thermally Processable Polyvinyl Alcohol; A Water Soluble, Environmentally Friendly and High-Performance Polymer”
  • Asahi Kasei Advance Corporation – “Continuous-Filament Cellulose Nonwovens”
  • Confitex Technology – “Reusables Production: It’s Not All Green”
  • Egal Pads, Inc. – “Closing the Circularity Gap One Used Pad at a Time”
  • Essity – “Diaper Collection & Recycling in Australia”
  • ExxonMobil Chemical Company – “Innovate New Levels of Strong Comfort with Hygiene Solutions”
  • Henkel Corporation – “Reducing the Packaging Waste from Personal Hygiene Products”
  • INNOVATEGRN – “Accelerating Innovation / Embracing a Consumer-Centric Approach”
  • Kuraray Europe GmbH – “Safe and Eco-friendly Elastics for Absorbent Hygiene Products”
  • Nexus Circular – “Increasing Plastics Circularity for the Hygiene Segment Through Advanced Recycling”
  • W. Pelz GmbH –“Disposable Pads Meet Reusable Underwear”
  • Price Hanna Consultants – “Squaring the Circle: Why Demonstration Projects = Good Sustainability Strategy” and “Wellness and Natural Materials”
  • Rem Brands, Inc. – “Effective Reduction of Material Odors, In-use Odors, and Post-use Odors”
  • Sequel – “Spiraling into Business: How a Dramatic Innovation to the Tampon Met the World’s Largest Manufacturer of Feminine Hygiene”
  • Sparkle Innovations Inc. – Sustainability and Circularity in the Absorbent Hygiene Products Industry”

The Hygienix program will offer a hands-on workshop as well as two pre-conference webinars. Jim Robinson, Principal, Absorbent Hygiene Insights, LLC, will lead the in-person workshop on AHP Absorbent Hygiene Systems, Monday afternoon, November 13th. This workshop evaluates SAP absorption for different SAPs and participants have the opportunity to deconstruct and examine several hygiene products including infant, adult, and period care products to increase the understanding of these systems.

More information:
Hygienix INDA
Source:

Association of the Nonwoven Fabrics Industry INDA

(c) Mittelstand-Digital Zentrum Smarte Kreisläufe
02.08.2023

Mittelstand-Digital Zentrum: Innovative Lösungen für textile Unternehmen

Am 17. und 18. Juli 2023 informierten sich Teilnehmerinnen und Teilnehmer der Veranstaltung „Textil Innovativ – Technologien für Mobilität und Schutz“ über Trends, Herausforderungen und Lösungen für moderne Mobilität sowie Persönliche Schutzausrüstung (PSA) in Verbindung mit Digitalisierung und Recycling. Zudem wurde zur „Datenbasierten Wertschöpfung in der Textilindustrie“ diskutiert.

Mobilität in der Zukunft ist digital, komfortabel und natürlich nachhaltig. Der Schalter für die Sitzheizung ist in die textile Oberfläche der Mittelkonsole integriert. Das Gewebe der Sitzfläche heizt oder kühlt – je nach Bedarf. Der Dachhimmel leuchtet. Die Karosserie ist leicht und stabil, um Sprit zu sparen und trotzdem bei Unfällen zu schützen. Referenten und Aussteller zeigten, wie sie den besonderen Anforderungen an Maschinen, Produktionsprozesse sowie die neuen Materialien selbst gerecht werden.

Am 17. und 18. Juli 2023 informierten sich Teilnehmerinnen und Teilnehmer der Veranstaltung „Textil Innovativ – Technologien für Mobilität und Schutz“ über Trends, Herausforderungen und Lösungen für moderne Mobilität sowie Persönliche Schutzausrüstung (PSA) in Verbindung mit Digitalisierung und Recycling. Zudem wurde zur „Datenbasierten Wertschöpfung in der Textilindustrie“ diskutiert.

Mobilität in der Zukunft ist digital, komfortabel und natürlich nachhaltig. Der Schalter für die Sitzheizung ist in die textile Oberfläche der Mittelkonsole integriert. Das Gewebe der Sitzfläche heizt oder kühlt – je nach Bedarf. Der Dachhimmel leuchtet. Die Karosserie ist leicht und stabil, um Sprit zu sparen und trotzdem bei Unfällen zu schützen. Referenten und Aussteller zeigten, wie sie den besonderen Anforderungen an Maschinen, Produktionsprozesse sowie die neuen Materialien selbst gerecht werden.

Auch das Thema Persönliche Schutzausrüstung (PSA) birgt für Unternehmen Herausforderungen. Viele Funktionen, wie beispielsweise Hitzeschutz, erfordern eine spezielle chemische Ausrüstung der Textilien. Diese unterliegt jedoch häufig umweltschutzrechtlichen Einschränkungen und Verboten. Worauf Unternehmen bei der Produktion von PSA achten müssen, wurde ebenfalls erörtert.

Welche Potenziale die Digitalisierung für genau diese Anforderungen bietet, wurde in der Veranstaltung ebenfalls deutlich. Der Digitale Produktpass kommt. Er ist Teil eines EU-weiten Maßnahmenpakets zur Förderung von Ökodesign und Ressourceneffizienz und soll den Verbraucher informieren, wo das Produkt herkommt, woraus es besteht oder wie man es reparieren kann. Die Umsetzung betrifft alle Branchen und Dienstleistungen, mit weitreichenden Auswirkungen auf die unternehmerischen Geschäftsprozesse. Das setzt eine gewaltige Datenmenge voraus. Wie datenbasierte Wertschöpfung in der Textilindustrie funktioniert, war Thema in der abschließenden Diskussionsrunde.  

An welchen Stellen das Mittelstand-Digital Zentrum Smarte Kreisläufe kleine und mittlere Unternehmen unterstützen kann, erläuterte die Geschäftsführerin Anja Merker in einem Pitch-Beitrag sowie an einem Informationsstand vor Ort. Das Angebot des Zentrums umfasst nicht nur reine Wissensvermittlung zum Unternehmen der Zukunft in Verbindung mit Digitalisierung und Künstliche Intelligenz. Die Partner geben Orientierung und bilden Ihre Mitarbeiter weiter, entwickeln gemeinsam Ideen in Workshops und erarbeiten mit Ihnen Konzepte, die Sie im Unternehmen umsetzen können.

Source:

Gesamtverband der deutschen Textil- und Modeindustrie e. V. / Mittelstand-Digital Zentrum Smarte Kreisläufe

26.07.2023

Design for Recycling: Mindeststandards berücksichtigen Anliegen der Recycler

Der Entwurf „Mindeststandards für die Bemessung der Recyclingfähigkeit von systembeteiligungspflichtigen Verpackungen“ findet die Zustimmung des bvse-Bundesverband Sekundärrohstoffe und Entsorgung.

Design4Recycling 500x500pxIn einem Schreiben an die Zentrale Stelle Verpackungsregister machen bvse-Geschäftsführer Thomas Braun und bvse-Referent Dr. habil. Thomas Probst deutlich, dass der nunmehr zum fünften Male weiter entwickelte Mindeststandard aus Sicht des bvse sorgfältig erstellt wurde und die Anliegen der Recycler berücksichtigt.

Der bvse hebt hervor, dass die Mindeststandards inzwischen so ausgestaltet sind, dass die praktische Recycelbarkeit der Verpackungen immer mehr Berücksichtigung findet. So werden Verpackungen nicht nur daran gemessen, dass die verwendeten Materialien grundsätzlich für das Recycling geeignet sind, sondern es findet auch Berücksichtigung, ob die Verpackung nach bestimmungsgemäßer Entleerung noch einen Füllgutrest enthält, der die Recyclingfähigkeit beeinträchtigt. Außerdem muss beispielsweise die Trennbarkeit der Verpackungskomponenten sichergestellt sein, sofern das für ein hochwertiges werkstoffliches Recycling erforderlich ist.

Der Entwurf „Mindeststandards für die Bemessung der Recyclingfähigkeit von systembeteiligungspflichtigen Verpackungen“ findet die Zustimmung des bvse-Bundesverband Sekundärrohstoffe und Entsorgung.

Design4Recycling 500x500pxIn einem Schreiben an die Zentrale Stelle Verpackungsregister machen bvse-Geschäftsführer Thomas Braun und bvse-Referent Dr. habil. Thomas Probst deutlich, dass der nunmehr zum fünften Male weiter entwickelte Mindeststandard aus Sicht des bvse sorgfältig erstellt wurde und die Anliegen der Recycler berücksichtigt.

Der bvse hebt hervor, dass die Mindeststandards inzwischen so ausgestaltet sind, dass die praktische Recycelbarkeit der Verpackungen immer mehr Berücksichtigung findet. So werden Verpackungen nicht nur daran gemessen, dass die verwendeten Materialien grundsätzlich für das Recycling geeignet sind, sondern es findet auch Berücksichtigung, ob die Verpackung nach bestimmungsgemäßer Entleerung noch einen Füllgutrest enthält, der die Recyclingfähigkeit beeinträchtigt. Außerdem muss beispielsweise die Trennbarkeit der Verpackungskomponenten sichergestellt sein, sofern das für ein hochwertiges werkstoffliches Recycling erforderlich ist.

"Wir begrüßen die im vorliegenden Entwurf enthaltenen Änderungen und Ergänzungen bei den systembeteiligungspflichtigen Verpackungen, dies umfasst insbesondere die Fraktionen PPK, Kunststoffe und Glas. Durch diese Vorgaben wird deren Recyclingfähigkeit voran gebracht. Änderungen oder Ergänzungen am Mindeststandard sind in der vorliegenden Entwurfsfassung daher nicht notwendig", betonen Thomas Braun und Thomas Probst.

In der Stellungnahme weist der bvse jedoch darauf hin, dass eine stringente Umsetzung der im Mindeststandard definierten Kriterien durch die Systeme zwingend erforderlich ist, um die anspruchsvollen Quotenvorgaben aus dem VerpackG, die zum 1. Januar 2022 nochmals deutlich erhöht wurden, zu erfüllen.

Abschließend mahnen die bvse-Vertreter jedoch an, dass ein Weg gefunden und umgesetzt werden müsse, wie recyclinggerechte Verpackungen bei der Lizensierung gefördert werden können. Denn das würde die Lenkungswirkung beim Design for Recycling noch weiter verbessern.

Source:

bvse-Bundesverband Sekundärrohstoffe und Entsorgung

WOW 2023 (c) INDA Association of the Nonwoven Fabrics Industry
21.07.2023

WOW 2023 with Attendance Records

INDA, the Association of the Nonwoven Fabrics Industry, announced the successful conclusion of the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. More than 495 senior-level leaders convened for new intelligence, connections, and business, which was a record turnout for the WOW event.

The 17th edition of WOW featured almost 60 tabletop exhibits, 26 presentations, and two pre-conference webinars. The program introduced Lightning Talks, “supersized elevator speeches” covering new trends, products, and ideas, and a 1.5-day revised WIPES Academy training course. WOW also featured a mentorship program for participants new to the wipes industry.

The WOW speakers shared their expert insights in these key topics:

INDA, the Association of the Nonwoven Fabrics Industry, announced the successful conclusion of the World of Wipes® (WOW) International Conference, July 17-20, Atlanta, Georgia. More than 495 senior-level leaders convened for new intelligence, connections, and business, which was a record turnout for the WOW event.

The 17th edition of WOW featured almost 60 tabletop exhibits, 26 presentations, and two pre-conference webinars. The program introduced Lightning Talks, “supersized elevator speeches” covering new trends, products, and ideas, and a 1.5-day revised WIPES Academy training course. WOW also featured a mentorship program for participants new to the wipes industry.

The WOW speakers shared their expert insights in these key topics:

  • Inflation, Supply Chain Issues, Capacity/Demand Balance
  • Plastic Policy: Closing the Intention-Action Gap
  • Sustainability and Manufacturing Practices
  • Consumer Market Data and Trends
  • Wipes Advancements
  • Transparency in the Supply Chain
  • Regulation, Innovation, Standards & Education in Flushability

World of Wipes Innovation Award®
The winner of the World of Wipes Innovation Award was the Nonwoven Wipe Using Biotransformation Technology developed by Indorama Ventures and Polymateria. This innovative 100% polypropylene spunlace wipe utilizes advanced biotransformation technology, meeting the BSI PAS 9017 specification. The wipe is compatible with mechanical recycling however, in the event it becomes fugitive, and exposed to heat, sunlight, air and moisture, will transform into a harmless, bioavailable wax at its end-of-life, returning safely to nature without leaving behind microplastics or toxins. This polypropylene wipe represents a significant leap towards eco-friendly, sustainable nonwoven hygiene products.

INDA announced that WOW 2024 will be held June 17-20, at the Hyatt Regency Minneapolis in Minneapolis, Minnesota.

More information:
INDA WOW nonwovens
Source:

INDA Association of the Nonwoven Fabrics Industry

20.07.2023

VDMA Textile Machinery: Planned PFAS ban threatens important textile machine components

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

The EU's planned ban on the entire group of per- and polyfluoroalkyl substances (PFAS) would endanger many industrial processes, states VDMA Textile Machinery. Textile manufacturing would be affected twice – by missing important chemicals for technical textile production and by the lack of indispensable textile machine components. The latter would affect the whole supply chain from textile machinery manufacturers and its suppliers to the textile industry in the EU.

Solid PFAS parts are widely used in textile machinery production, especially where extreme conditions prevail. Verena Thies, Managing Shareholder Thies GmbH & Co. KG, explains: “Our textile dyeing machines are world leaders and set standards in efficiency and sustainability. They work under pressure at temperatures of up to 140° C using highly acidic, highly basic and/or oxidative or even reductive chemicals. This is precisely why PFAS is needed, for example, in seals and rings, flaps as well as valves for a long-lasting and high-quality machine concept – because there are no alternatives with qualitatively equivalent properties. In addition, PTFE semi-finished products enable a sliding and gentle contact with the textile fabric in ecologically important techniques in the transformation of textile wet finishing."

PTFE and also FKM are fluoropolymers (fluoroplastics and fluoroelastomers), a group within the broad PFAS range of about 10,000 substances which would be banned for production, use and sale in the EU. They are high-tech materials, and as so-called "polymers of low concern" are not a danger to the environment, according to the OECD. Furthermore, these components are installed inside a machine and exchanged or disposed of properly. PFAS such as PTFE and FKM must be exempted from the ban, demands the VDMA in its position paper.

"In this way, the association also supports the approach taken in Great Britain. With the 10,000 substances, everything is lumped together, although the various PFAS groups are very different," warns Dr Sarah Brückner, Head of VDMA Environmental Affairs and Sustainability. "We should take our cue from the UK and look at the substance groups in a differentiated way."
Apart from several types of dyeing machines, PFAS components are indispensable in textile drying machines (e.g., conveyor dryers, tumblers and stenters) and damping machines. They are also used in fully automatic chemical dispensing systems and pressure vessels for thermochemical treatment of textile recycling material, heat recovery systems and wastewater treatment technology. This means that a lot of machines needed for a sustainable textile production would be affected by the PFAS ban.

VDMA Textile Machinery will take part in the ongoing EU public consultation. The association will describe indispensable key functionalities and conditions of use in the textile machinery sector as well as the consequences for the companies and the customers in the EU if the ban is imposed. The consultation ends on September 25, 2023, and VDMA urged its members affected by the planned restriction to participate in the consultation at an early stage. This is the only way to ensure that the broad scope of the mechanical and plant engineering sector is represented.

More information:
VDMA Textilmaschinen PFAS
Source:

VDMA e. V.
Textile Machinery

 

13.06.2023

Three Finalists Announced for the 2023 World of Wipes Innovation Award®


2XL Corporation, Avgol Nonwovens, and Yowel to compete for Award
INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the World of Wipes Innovation Award®. The Award will be presented at the 17th annual World of Wipes® (WOW) International Conference, July 17-20, at the Atlanta Marriott Marquis in Atlanta, Georgia.    

The three products vying for this Award are a cleaning and disinfecting device from 2XL Corporation, a wipe utilizing biotransformation technology from Avgol Nonwovens, and a reusable towel dispensing system from Yowel.

The winner will be announced on July 20th at 11 am. The three companies competing for the Award are:


2XL Corporation, Avgol Nonwovens, and Yowel to compete for Award
INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the World of Wipes Innovation Award®. The Award will be presented at the 17th annual World of Wipes® (WOW) International Conference, July 17-20, at the Atlanta Marriott Marquis in Atlanta, Georgia.    

The three products vying for this Award are a cleaning and disinfecting device from 2XL Corporation, a wipe utilizing biotransformation technology from Avgol Nonwovens, and a reusable towel dispensing system from Yowel.

The winner will be announced on July 20th at 11 am. The three companies competing for the Award are:

Windup by 2XL Corporation
Meet the Windup: a groundbreaking new device that can clean and disinfect your home using a self-advancing microfiber roll that you never have to touch. Just one roll will clean your kitchen over 50 times. An innovative one-touch revolving roll and a versatile spray system that allows use of your favorite floor cleaner or our specially formulated disinfecting solution. No more stopping to change expensive pads or change filthy water. Get wound up for Windup.

Nonwoven wipe using biotransformation technology by Avgol Nonwovens
This innovative spunlace wipe utilized advanced biotransformation technology developed jointly by Indorama Ventures and Polymateria. Meeting the BSI PAS 9017 specification, this wipe in the event it becomes fugitive, and exposed to heat, sunlight, air and moisture will transform into a harmless, bioavailable wax at its end-of-life, eliminating microplastic pollution. Compatible with mechanical recycling and combatting ‘fugitive’ waste, this wipe represents a significant leap towards eco-friendly, sustainable nonwoven hygiene products.

The Yowel™ System by Yowel
Ready to help the earth and save money…every day? Yowel is a patented system for dispensing reusable towels. Instead of a roll of paper towels, place a Yowel full of reusable towels into your paper towel holder – or choose the countertop model, and you’re immediately reducing your paper towel consumption.  The Yowel System has 40 reusable towels and a mesh bag for used towels. Save money and help Mother Nature.

INDA’s Technical Advisory Board selected the finalists based on the creativity, uniqueness, and technical sophistication employed in finding novel ways to expand the utilization of nonwovens. Categories considered for the award were wipes related raw materials, roll goods, converting, packaging, active ingredients, binders, additives, and end-use products.

Nice-Pak’s SecureFLUSH® Technology Flushable Wipes received the 2022 World of Wipes Innovation Award for their unique, 100% cellulose nonwoven that is strong enough to clean, yet break apart rapidly, when flushed. A specialty “lock and key” design of plant-based fibers and formula leverages patent-pending technology to break apart five times faster than the leading brand of two-ply toilet paper and ensure responsible care of plumbing and wastewater. SecureFLUSH® Technology Flushable wipes are available in Walmart, Amazon, and at Nicencleanwipes.com.

More information:
INDA WOW nonwovens World of Wipes
Source:

INDA

Photo: AVK
26.05.2023

AVK: Successful Flame Retardancy Conference in Berlin

  • Flame Retardancy for Composites Applications in the Transport Sector

On 10-11 May 2023, the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin organised for the first time an international, English-language conference on flame retardancy.

In 18 compact lectures, more than 20 experts informed nearly 80 participants about new developments, requirements and innovations regarding specific flame retardant properties of components made of fibre-reinforced plastics/composites for the transport sector.

Among others, there were presentations by industry representatives from Saertex, BÜFA, Clariant, Diehl Aviation and Airbus, but also from institutes such as the Fraunhofer Institutes or the Federal Institute for Materials Research and Testing. Presentations on the topics of standardisation, raw materials, automotive or recycling were on the agenda, but also flame retardants for connectors and battery housings for electric vehicles or fire-retardant systems for rail vehicles or fire-retardant CFRP made from recycled CF nonwoven were presented.

  • Flame Retardancy for Composites Applications in the Transport Sector

On 10-11 May 2023, the AVK - Industrievereinigung Verstärkte Kunststoffe e. V. in cooperation with the FGK - Forschungsgesellschaft Kunststoffe e.V. in Berlin organised for the first time an international, English-language conference on flame retardancy.

In 18 compact lectures, more than 20 experts informed nearly 80 participants about new developments, requirements and innovations regarding specific flame retardant properties of components made of fibre-reinforced plastics/composites for the transport sector.

Among others, there were presentations by industry representatives from Saertex, BÜFA, Clariant, Diehl Aviation and Airbus, but also from institutes such as the Fraunhofer Institutes or the Federal Institute for Materials Research and Testing. Presentations on the topics of standardisation, raw materials, automotive or recycling were on the agenda, but also flame retardants for connectors and battery housings for electric vehicles or fire-retardant systems for rail vehicles or fire-retardant CFRP made from recycled CF nonwoven were presented.

More information:
AVK Composites flame retardant
Source:

AVK