From the Sector

Reset
6 results
06.11.2023

Mahlo presents new solutions at ITMA Asia 2023

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Mahlo GmbH + Co. KG will present its systems and solutions for efficient and high-quality textile production and finishing together with Shanghai Kuantex at ITMA Asia (November 19 and 23). The focus will be on the machine manufacturer's new straightening concept, the Orthopac RXVMC.

"In the new straightening concept, special attention was paid to the straightening mechanics and their interaction with the analysis electronics of the probe system," explains Sales Manager Thomas Höpfl. The control concept is also new. A probe group at the leveler infeed detects distortions even before they reach the correction rolls. In this way, the rolls are brought directly into position and the fabric is corrected from the very first centimeter. A scanner group at the outfeed also detects possible residual distortion, which is corrected at the second straightening module. This enables an even more precise and faster response when it comes to reacting to rapidly changing distortions. The Orthopac RXVMC therefore shows its full strength when straightening knitwear and fabrics sensitive to distortion.

Also contributing to high-quality textile production and finishing is the Famacont PMC for controlling weft and stitch course density, which will also be on show at ITMA Asia. The Famacont PMC-15 uses a sensor to measure the yarn or stitch density and compares it with the target value stored in the recipe data management system. The detected deviation of the yarn density from the target value is used to fully automatically regulate the leading during the needling process on the stenter frame. Interested parties can have the mode of operation explained to them at the Mahlo booth with the help of a demo tower and their own or provided fabric samples.

Another major topic remains Industry 4.0, because the best measured data is of no use if it cannot be utilized. Mahlo has continuously developed its digital environment mSmart. "Our systems generate data that the customer can use immediately to regulate goods on-line. At the same time, all measured values are backed up in our data management system mLog enhanced and can be retrieved at any time. With this historical data, processes can be optimized and weak points in the process can be minimized," explains Sales Manager Thomas Höpfl.

Process control with Qualiscan QMS (c) Mahlo. Process control with Qualiscan QMS.
17.05.2022

Mahlo at Techtextil 2022

At Techtextil from 21-24 June in Frankfurt, Mahlo will be demonstrating how manufacturers of technical textiles can optimise their production even further using measuring and control technology.

Special straightening technology for technical textiles
Mahlo's range also includes solutions for straightening distorted goods. Best suited for technical textiles are, for example, the symbol of the straightening machine, the Orthopac RVMC-15 and the reinforced version Orthopac GRVMC-15. Frame, bearings, and rollers are designed for high loads and allow large working widths of up to 5,400 mm. As the latest development from Mahlo, the experts present the Orthopac CRVMC-15 automatic straightener, which is particularly interesting for the glass & carbon fabric industry and some special applications.

At Techtextil from 21-24 June in Frankfurt, Mahlo will be demonstrating how manufacturers of technical textiles can optimise their production even further using measuring and control technology.

Special straightening technology for technical textiles
Mahlo's range also includes solutions for straightening distorted goods. Best suited for technical textiles are, for example, the symbol of the straightening machine, the Orthopac RVMC-15 and the reinforced version Orthopac GRVMC-15. Frame, bearings, and rollers are designed for high loads and allow large working widths of up to 5,400 mm. As the latest development from Mahlo, the experts present the Orthopac CRVMC-15 automatic straightener, which is particularly interesting for the glass & carbon fabric industry and some special applications.

The Mahlo team will present the wide portfolio of intelligent scanners and sensors that record product and process parameters, such as distortion, fabric temperature, dwell time, basis weight, coating weight, thickness, moisture content, residual moisture, exhaust moisture, air permeability, etc. online. Among other things, visitors can expect to see the Famacont PMC-15 weft density measurement system in live operation. The system measures the weft or course density on the running web and compares it with the target value stored in the recipe data management system. The detected deviation from the target value is used to fully automatically control the overfeed during the needling process at the stenter frame and to ensure a constant weft/course density over the full width of the product.

Source:

Mahlo GmbH + Co. KG

JEC World: METYX and ITA officially join forces (c) METYX
METYX and ITA officially join forces
11.05.2022

JEC World: METYX and ITA officially join forces

The ITA Group, consisting of the Institute for Textile Technology of RWTH Aachen University (ITA) and their research and development service provider ITA Technologietransfer GmbH (ITA GmbH) are proud to announce their new partnership with METYX Composites, Turkey today at JEC World in Paris. METYX is a globally leading manufacturer of high-performance technical textiles for applications in the transportation, wind energy, construction, sports and leisure industries.

Ugur Ustunel, CEO METYX Composites: “The access to ITA´s competences along the entire textile composite value chain and to the impressive machine parks with over 250 machines from lab scale to industrial scale and the exchange with other partners will be very welcome for our future pre-competitive developments.” Dr. Christoph Greb, Scientific Director of ITA: “We are very happy to welcome METYX to our
network and to collaborate in many joint projects and studies on topics like recycling and sustainability, tapes and hybrid yarns or natural fibres just to name a few.”

The ITA Group, consisting of the Institute for Textile Technology of RWTH Aachen University (ITA) and their research and development service provider ITA Technologietransfer GmbH (ITA GmbH) are proud to announce their new partnership with METYX Composites, Turkey today at JEC World in Paris. METYX is a globally leading manufacturer of high-performance technical textiles for applications in the transportation, wind energy, construction, sports and leisure industries.

Ugur Ustunel, CEO METYX Composites: “The access to ITA´s competences along the entire textile composite value chain and to the impressive machine parks with over 250 machines from lab scale to industrial scale and the exchange with other partners will be very welcome for our future pre-competitive developments.” Dr. Christoph Greb, Scientific Director of ITA: “We are very happy to welcome METYX to our
network and to collaborate in many joint projects and studies on topics like recycling and sustainability, tapes and hybrid yarns or natural fibres just to name a few.”

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support ITA in developing and growing their network. ITA is located in the centre of the RWTH Aachen University Campus in close proximity to numerous other institutes for lightweight developments.”

13.10.2021

Mahlo at the Innovative Textile and Apparel Show

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

For the second time the Innovative Textile and Apparel Show opens its virtual fairground this year. For the second time, Mahlo takes the chance to get in contact with customers from all over the world. Mahlo will present the latest systems and solutions for efficient and high-quality textile production and finishing, with the focus on process optimisation in a digital environment.

In the textile industry, Mahlo is known for high-quality automatic weft straighteners, whether roller or needle straighteners, whether for the finest textiles or heavy fabrics - interested parties can find out about the right equipment for their specific requirements.

Process control systems such as the Patcontrol PCS for pattern recognition and the Famacont PMC for controlling weft and stitch course density also contribute to textile production and finishing. Mahlo wants to support manufacturers in optimising their production processes and thus also the end product in a cost-efficient way.

Solutions for technical textiles and nonwovens
Support in the production process is also available for technical textiles and nonwovens. The focus here is on the Qualiscan QMS quality measurement system. The modularly designed system, which consists of sensors and measuring frames, measures, logs and controls critical parameters such as basis weight, moisture or layer thickness across the entire fabric width. Depending on the application and task, different measuring methods are used for this purpose.

Source:

Mahlo GmbH + Co. KG

Reach Group: Composites China Trade Show (c) REACH Group
10.09.2020

AMAC/Germany and REACH Group/China: first life business activity since Covid-19 at the Composites China Trade Show in Shanghai

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

As the first composites trade show worldwide since the Covid-19-crisis, the China Composites in Shanghai (September 2 to 4, 2020) took up its activity. The show counted about 600 exhibitors and over 20 000 visitors, mostly Chinese locals, attended the exhibition.

Chinese Reach Group under the lead of its president Daniel He represented a large portfolio of European companies and their recent developments through their cooperation with Dr. Michael Effing´s AMAC/Germany, among them Airborne (NL), Textechno (D) and Conbility (D).

Daniel He describes the situation: „The Chinese market is picking up again; a price increase of 7% for glass fibers was announced right before the China Composites Show, on August 25th 2020, which was even leading to a temporary material shortage. Today, the most booming industries in China are wind energy, building and infrastructure and innovation for electric cars. Unlike the rest of the world, where the aircraft industry undergoes a deep decline, in China it takes up by 50 %, which is very promising. Furthermore, we expect half a year for a full recovery of the industry, while the China growth of 2020 is still expected to be between 2 and 4 %.“

Michael Effing replied: “Enabling the composites business between China and Europe is the aim of our cooperation with Reach and with our customers, which are active in digital automatization, testing equipment or cost optimization software. We are very happy to have been present in China through our representant Reach and are looking forward to bridge and overcome the Covid-19-crisis with our upcoming event in Germany, the Composites for Europe in Stuttgart in November and hope to be back to full global business speed at the JEC in Paris in 2021.“

Source:

AMAC GmbH

Reach Group: Composites-Messe (c) REACH Group
10.09.2020

AMAC/Deutschland und REACH-Gruppe/China: erste geschäftliche Aktivität auf der Composites China Trade Show in Shanghai seit der Covid-19-Krise

Als erste Composites-Messe weltweit seit Beginn der Corona-Krise hat die China Composites in Shanghai (2. bis 4. September 2020) ihre Tätigkeit wieder aufgenommen. Die Messe verzeichnete ca. 600 Aussteller und über 20 000, größtenteils chinesische Besucher.

Unter der Leitung ihres Präsidenten Daniel He stellte die chinesische Reach Group vor Ort einige europäische Unternehmen und deren jüngste Entwicklungen aus der Kooperation mit Dr. Michael Effing´s AMAC vor, darunter Airborne (NL), Textechno (D) und Conbility (D).

Als erste Composites-Messe weltweit seit Beginn der Corona-Krise hat die China Composites in Shanghai (2. bis 4. September 2020) ihre Tätigkeit wieder aufgenommen. Die Messe verzeichnete ca. 600 Aussteller und über 20 000, größtenteils chinesische Besucher.

Unter der Leitung ihres Präsidenten Daniel He stellte die chinesische Reach Group vor Ort einige europäische Unternehmen und deren jüngste Entwicklungen aus der Kooperation mit Dr. Michael Effing´s AMAC vor, darunter Airborne (NL), Textechno (D) und Conbility (D).

Daniel He zur aktuellen Lage: "Der chinesische Markt zieht wieder an; am 25. August 2020, unmittelbar vor der China Composites Show, wurde eine Preiserhöhung von 7% für Glasfasern angekündigt, die eine vorübergehende Materialknappheit ausgelöst hat. Derzeit wachsen in China vor allem die Märkte Windenergie, Bauwesen und Infrastruktur sowie Innovationen für Elektroautos. Im Gegensatz zum Rest der Welt, wo die Flugzeugindustrie besonders unter der Krise leidet und einen starken Rückgang erfährt, wächst sie in China aktuell um etwa 50 % mit der Einführung der neuen chinesischen Flugzeugtypen C919 und CR 929, was wirklich sehr vielversprechend ist. Das Wirtschaftswachstum in China dürfte für 2020 trotz allem etwa zwischen 2 und 4 % liegen. Darüber hinaus erwarten wir im Laufe des nächsten halben Jahres eine vollständige Erholung der Composites Branche.“

Michael Effing erklärt: "Das Composites-Geschäft zwischen China und Europa weiter auszubauen ist das Ziel unserer Zusammenarbeit mit Reach und mit unseren Kunden, die in den Bereichen digitale Automatisierung, Spezialmaschinen sowie Prüfgeräte oder Software zur Kostenoptimierung tätig sind. Wir sind sehr froh, durch unseren Vertreter Reach in China präsent gewesen sein zu können. Wir freuen uns darauf, die Corona-Krise mit unserer bevorstehenden Veranstaltung Composites for Europe in Stuttgart am vom 10. bis 12. November zu überbrücken und hoffen, 2021 auf der JEC in Paris wieder in vollem globalen Geschäft zurück zu sein“.

More information:
Corona Messe Composites AMAC REACH
Source:

AMAC GmbH