From the Sector

Reset
49 results
PREMIUM GROUP & JOOR present their first Hybrid Trade Fair Platform (c) Premium Exhibitions GmbH
09.06.2022

PREMIUM GROUP & JOOR present hybrid Trade Fair Platform

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group and JOOR have renewed their partnership to power the SS23 PREMIUM and SEEK trade shows through JOOR’s digital platform, underpinning their belief in the power of a hybrid approach to wholesale.

From 7 - 9 July, buyers visiting the shows in Berlin will be able to learn more about and shop from exhibitors in a new hybrid way. Buyers can discover the full PREMIUM and SEEK portfolio of brands both in-person and online 24/7 by visiting JOOR Passport, JOOR's digital trade show destination.

Premium Group unites its various show locations to one cosmos for SS23 at Messe Berlin. The PREMIUM and SEEK shows will be joined by two further components— The Ground is a D2C creative platform for brands and consumers to meet, connect, and collaborate through one-of-a-kind experiences, engaging content, and innovative products, while FASHIONTECH, features masterclasses and panel discussions from the fashion industry’s most brilliant minds. A calendar of content includes deep dives into strong, successful, and sustainable strategies. As part of the content offer, JOOR will facilitate a masterclass on ‘Digital Wholesale’ and a future-looking roundtable discussion with four leading fashion brands on the FASHIONTECH stage.

Throughout the duration of the show, in-person buyers and visitors will have the ability to shop via the Premium Group mobile app. By simply scanning a brand’s corresponding QR code, visitors will link to the brand’s custom profile on JOOR Passport and be able to shop collections directly on the platform. JOOR Passport will also extend the duration of the shows by up to three months, allowing brands to continue wholesale selling digitally outside the window of the physical show.

JOOR and Premium Group’s flexible hybrid format allows visitors and brands a seamless digital and physical introduction to each other and their collections, the opportunity to connect in an efficient, effective, and longer term way, and the convenience to shop the show 24 hours a day from anywhere in the world.

Brands participating include Drykorn, Closed, Bertoni of Denmark, Veja, Ecoalf, Wrangler and Absolut Cashmere.

Source:

Premium Exhibitions GmbH

(c) PCMC, Barry-Wehmiller
05.05.2022

PCMC opens Packaging Innovation Center for printing and packaging industries

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, welcomed 70-plus customers, suppliers and area supporters to its new Packaging Innovation Center on April 26 for a ribbon-cutting ceremony, tour and overview presentation.

Located at PCMC’s headquarters in Green Bay, the facility — focused on the printing and packaging industries — will serve as a resource for training, demonstrations and industry trials, along with research and development opportunities. The new center features the latest equipment for plate mounting, anilox roll laser cleaning, and central impression and inline flexographic printing.

PCMC’s current partners at the center include 3M, All Printing Resources Inc., AV Flexologic, Clean Planet, Fox Valley Flexo Services, Harper Corporation of America, Interflex Laser Engravers, INX International Ink Co., Miraclon, Rossini s.p.a., Sandon Global, tesa SE, Wikoff Color Corporation and XSYS, in addition to Hudson-Sharp, which is part of PCMC. In the future, PCMC will seek to expand the center’s capabilities by collaborating with additional innovative companies serving the flexographic printing industry.

Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, welcomed 70-plus customers, suppliers and area supporters to its new Packaging Innovation Center on April 26 for a ribbon-cutting ceremony, tour and overview presentation.

Located at PCMC’s headquarters in Green Bay, the facility — focused on the printing and packaging industries — will serve as a resource for training, demonstrations and industry trials, along with research and development opportunities. The new center features the latest equipment for plate mounting, anilox roll laser cleaning, and central impression and inline flexographic printing.

PCMC’s current partners at the center include 3M, All Printing Resources Inc., AV Flexologic, Clean Planet, Fox Valley Flexo Services, Harper Corporation of America, Interflex Laser Engravers, INX International Ink Co., Miraclon, Rossini s.p.a., Sandon Global, tesa SE, Wikoff Color Corporation and XSYS, in addition to Hudson-Sharp, which is part of PCMC. In the future, PCMC will seek to expand the center’s capabilities by collaborating with additional innovative companies serving the flexographic printing industry.

Source:

PCMC, Barry-Wehmiller

25.04.2022

Global Organic Textile Standard (GOTS) seeks public input for standard revision

The worldwide leading textile processing standard for organic fibres, Global Organic Textile Standard (GOTS), seeks public input as it begins the revision process for GOTS standard version 7.0.

As a solution for sustainability-related challenges in textile processing, GOTS sets strict and binding requirements regarding ecological and social parameters. These are updated every three years in an open and transparent revision process which fosters constant progress towards the development of better textile processing methods. In this process of continuous improvement, GOTS collaborates with all relevant international stakeholders, including the textile and apparel industry, chemical suppliers, organic farming and environmental organisations, workers' rights groups and labour unions, to ensure ongoing relevance and account for changes in the industry.

The initial period of public input runs from 14 April through 12 June. During this phase, all interested parties, including industry representatives, NGO’s and consumers, are encouraged to participate by submitting comments, feedback, and ideas through GOTS’s online portal.

The worldwide leading textile processing standard for organic fibres, Global Organic Textile Standard (GOTS), seeks public input as it begins the revision process for GOTS standard version 7.0.

As a solution for sustainability-related challenges in textile processing, GOTS sets strict and binding requirements regarding ecological and social parameters. These are updated every three years in an open and transparent revision process which fosters constant progress towards the development of better textile processing methods. In this process of continuous improvement, GOTS collaborates with all relevant international stakeholders, including the textile and apparel industry, chemical suppliers, organic farming and environmental organisations, workers' rights groups and labour unions, to ensure ongoing relevance and account for changes in the industry.

The initial period of public input runs from 14 April through 12 June. During this phase, all interested parties, including industry representatives, NGO’s and consumers, are encouraged to participate by submitting comments, feedback, and ideas through GOTS’s online portal.

“We are looking forward to receiving input from stakeholders around the world for GOTS version 7.0. This open call for feedback is part of what keeps our certification requirements up-to-date with the most cutting-edge developments in the industry,” says GOTS Managing Director Rahul Bhajekar.

Beginning in 2022, the revision process will follow the newly developed Standard Setting Procedure, which provides for the constitution of a Standard Revision Committee (SRC) for each revision. This group will serve as the pivotal force behind decisions about the revisions. The SRC consists of experts from different stakeholder groups, including associations, organisations, companies and individuals. All input received by June 12 will be carefully considered by the SRC as well as compiled and made public for an additional 30-day consultation period later this year. All drafts of the standard will also be made public. GOTS standard version 7.0 will be finalised in early 2023, and will be available on the GOTS website.

The timeline for the revision to GOTS version 7.0 is as follows:

  1. Constitution of GOTS SRC- April 2022
  2. Release of first revision draft for public consultation - 14 April 2022
  3. First public consultation period - 60 days (April 14 to June 12)
  4. Deliberations by the SRC on input received - May to August 2022
  5. Release of second revision draft for public consultation - September 2022
  6. Second public consultation period - 30 days from release
  7. Deliberations by the SRC on input received - October to November 2022
  8. Finalisation of GOTS version 7.0 - February 2023
  9. Release of GOTS version 7.0 - March 2023
More information:
GOTS revision stakeholder
Source:

GOTS

(c) Huntsman Textile Effects
22.04.2022

Huntsman Textile Effects at Performance Days 2022

Huntsman Textile Effects, a global leader in innovative solutions and environmentally sustainable products, is featuring high-performance end-to-end systems for protection effects and sustainable solutions for any wear at Performance Days on April 27-28, 2022, in Munich, Germany.

With more consumers seeking comfort and protection when buying sportwear, they expect their sports apparel to dry quickly, resist stains and odors, and offer breathability. Achieving these functionalities with on-trend aesthetics whilst realizing sustainability, are possible.

Huntsman Textile Effects, a global leader in innovative solutions and environmentally sustainable products, is featuring high-performance end-to-end systems for protection effects and sustainable solutions for any wear at Performance Days on April 27-28, 2022, in Munich, Germany.

With more consumers seeking comfort and protection when buying sportwear, they expect their sports apparel to dry quickly, resist stains and odors, and offer breathability. Achieving these functionalities with on-trend aesthetics whilst realizing sustainability, are possible.

Resource saving solutions
Huntsman will introduce the AVITERA® SE Fast process at Performance Days. The revolutionary technology delivers the lowest environmental impact for dyeing polyester-cellulosic (PES-CO) blends. It combines alkali-clearable TERASIL® W/WW disperse dyes and AVITERA® SE reactive dyes to cut processing time from around nine hours to just six, helps mills reduce the water and energy required for production by up to 50% and increases output by up to 25% or more while delivering outstanding wet-fastness to ensure that sportswear will not bleed or stain during home laundering, or while in storage or transit.

EROPON® E3-SAVE is another next-generation water saving innovation. An all-in-one textile auxiliary for PES processing, it allows pre-souring, dyeing and reduction clearing to be combined in a single bath and eliminates the need for anti-foaming products, which shortens processing time and saves water and energy.

Eco-friendly stain and rain resistance
In partnership with Chemours, Huntsman will present the new eco-friendly finishes that repel water and stains, and help garments looking new for longer. Teflon™ EcoElite with Zelan™ R3 technology contains 63% plant-based materials and is the industry’s first renewably sourced water-repellent finish. It exceeds performance levels possible with traditional fluorinated technologies, with excellent water repellency and durability while reserving breathability.

Innovative odor control solutions
Huntsman will also showcase revolutionary antimicrobial and odor-control solutions as part of their partnership with Sciessent. Sciessent’s latest anti-odor technology – NOBO™ specifically developed to reduce odors in natural and synthetic fabrics. It can be incorporated into virtually any fabric – from base layer and activewear tops to socks and underwear to jeans and chinos. It offers a cost-effective way to upgrade everyday garments.

In addition, the partners will also present Sciessent’s Agion Active X2®, a next-generation odor-control solution that combines advanced antimicrobial and odor-absorbing technologies to both capture and fight odor-causing bacteria, and Lava X2®, a standalone odor adsorption product and key component of Agion Active X2® that attracts, absorbs and degrades odors for long-lasing odor protection.

 

Source:

Huntsman Textile Effects

(c) FET
FET-100 Series Melt Spinning System
13.03.2022

FET gearing up for Techtextil 2022

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

With just 3 months to go before Techtextil Frankfurt, UK company Fibre Extrusion Technology Limited (FET), is looking forward to exhibiting at this trade show once again. Techtextil attracts international blue-chip companies at the cutting edge of technology, seeking innovative solutions to technical challenges, so this event represents an ideal opportunity to demonstrate how FET can help achieve their goals.

FET is an acknowledged leader in laboratory and pilot meltspinning equipment for a vast range of applications, such as precursor materials used in high value technical textiles, sportswear, medical devices and specialised novel fibres from exotic and difficult to process polymers. Where melt spinning solutions are not suitable, FET provides a viable alternative with pilot and small scale production wet spinning systems.

However, FET will also showcase at Techtextil its more recent laboratory scale spunbond system, which enables client development of nonwoven fabrics in a number of formats and polymers. FET already has a number of spunbond systems in the field, including composite systems which utilise both spunbond and meltspun functions.

A major theme to be highlighted on the FET stand is Sustainability. The FET range of laboratory and pilot extrusion lines is ideally suited for both process and end product development of sustainable materials.

FET has successfully processed almost 30 different polymer types in multifilament, monofilament and non-woven formats, collaborating with specialist companies worldwide to promote greater sustainability through innovative manufacturing processes.

Source:

DAVID STEAD PROJECT MARKETING LTD for FET

Kornit Digital and Fashion-Enter Bring Fashion and Textile Production Back to the UK with Sustainable, On-Demand Digital Manufacturing (c) Kornit
Kornit Digital & Fashion Enter Innovation Centre
08.03.2022

Kornit Digital and Fashion-Enter Bring Fashion and Textile Production Back to the UK with Sustainable, On-Demand Digital Manufacturing

  • Unveil UK’s first-ever sustainable Fashtech Innovation Centre, displaying mass customization capabilities empowering designers, apparel brands, and other creatives

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand digital fashionx and textile production technologies and Fashion-Enter - a social enteprise, which strives to be a centre of excellence for sampling, grading, production, and for learning and development of skills within the fashion and textiles industry – today announced a first-of-its-kind Fashtech Innovation Centre in London. Aimed at bringing on-demand fashion and textile mass customization back to the UK, and unveiled on March 3rd and 4th, 2022 at Fashion-Enter's state-of-the-art training and manufacturing site, the Centre is fully supported by Kornit Digital's revolutionary, direct-to-fabric and direct-to-garment digital production solutions.

  • Unveil UK’s first-ever sustainable Fashtech Innovation Centre, displaying mass customization capabilities empowering designers, apparel brands, and other creatives

Kornit Digital Ltd. (NASDAQ: KRNT), a worldwide market leader in sustainable, on-demand digital fashionx and textile production technologies and Fashion-Enter - a social enteprise, which strives to be a centre of excellence for sampling, grading, production, and for learning and development of skills within the fashion and textiles industry – today announced a first-of-its-kind Fashtech Innovation Centre in London. Aimed at bringing on-demand fashion and textile mass customization back to the UK, and unveiled on March 3rd and 4th, 2022 at Fashion-Enter's state-of-the-art training and manufacturing site, the Centre is fully supported by Kornit Digital's revolutionary, direct-to-fabric and direct-to-garment digital production solutions.

According to Kornit Digital’s Impact and Environmental, Social and Governance (ESG) report, 30 percent of textile production is overproduction, while 95 percent of water waste is created as companies globally look towards more sustainable futures with customized, creative, and real-time offerings. Using proprietary streamlined, eco-friendly digital production technologies, Kornit Digital is transforming the fashion industry with more efficient and sustainable processes. According to the same report, by 2026, the Company’s systems will use up to 95 percent less water, 94 percent less energy and produce 83 percent less greenhouse gas emissions.

In addition to highlighting production capabilities that minimize carbon footprint, the Fashtech Innovation Centre serves as a prototype for brands and fulfillers seeking to mitigate logistical complexities, time-to-market, and supply chain risks by bringing production nearer to the end consumer. Eliminating overproduction and producing on demand, this nearshoring model drives profitability even in highly regulated and high-cost markets while contributing to local economies and removing transport-related waste.

Serving as a fulfilment site and academy for training production, the Centre includes both Kornit Presto direct-to-fabric and Kornit Atlas MAX direct-to-garment systems, as well as numerous graphic design and workflow tools and systems to enable cut-and-sew operations for a comprehensive “pixel to parcel to doorstep” cycle. Consolidating the process into a single location helps maintain full visibility and control of operations and products. Taking this one step further for creators and brands, visitors can experience the KornitX Global Fulfilment Network, enabling customers to create both new sales channels and accessibility to enable production on demand. Attendees can see how Kornit’s single-step digital production technology empowers unlimited graphic expression using less floor space, resources, waste, and time—all at higher margins.

“This Innovation Centre makes it possible to capture the full, end-to-end production process in one, single location,” said Jenny Holloway, Chief Executive Officer, Fashion-Enter. “The beauty of having print on demand means there are no minimums, so we can make one garment, or we can make up to 30,000 garments a week from all locations at the same fixed cost. Here, we can also train future generations on the right way of producing garments for today, responsive to demand, with minimal waste—ethical and sustainable. This is the future of fashion and textiles.”

 Hexcel’s innovative surface technology yields parts with paint-ready surfaces for builder of luxury yachts (c) Hexcel
Sunseeker 90 Ocean Luxury Yacht
26.01.2022

Hexcel Selected for Sunseeker 90 Ocean Luxury Yacht

  • Hexcel HexPly® XF Selected for High-Quality, Paint-Ready Parts for Sunseeker 90 Ocean Luxury Yacht
  • Hexcel’s innovative surface technology yields parts with paint-ready surfaces for builder of luxury yachts

Yacht builder Sunseeker has chosen Hexcel’s HexPly® XF surface technology to produce prepreg parts with high-quality, paint-ready surfaces quickly and efficiently for its 90 Ocean luxury yacht, one of its newest models.

The lightweight composite hardtop for the Sunseeker 90 Ocean yacht is manufactured from a combination of HexPly® XF and Hexcel's HexPly® SuperFIT® semi-preg. The hardtop is lighter in weight than versions made using resin-infusion processes, and it de-molds with a pinhole-free surface that needs minimal preparation to be ready for paint. Sunseeker has recorded an overall reduction in process time of around 30%, saving three days of manufacturing time per hardtop.

  • Hexcel HexPly® XF Selected for High-Quality, Paint-Ready Parts for Sunseeker 90 Ocean Luxury Yacht
  • Hexcel’s innovative surface technology yields parts with paint-ready surfaces for builder of luxury yachts

Yacht builder Sunseeker has chosen Hexcel’s HexPly® XF surface technology to produce prepreg parts with high-quality, paint-ready surfaces quickly and efficiently for its 90 Ocean luxury yacht, one of its newest models.

The lightweight composite hardtop for the Sunseeker 90 Ocean yacht is manufactured from a combination of HexPly® XF and Hexcel's HexPly® SuperFIT® semi-preg. The hardtop is lighter in weight than versions made using resin-infusion processes, and it de-molds with a pinhole-free surface that needs minimal preparation to be ready for paint. Sunseeker has recorded an overall reduction in process time of around 30%, saving three days of manufacturing time per hardtop.

The hardtop provides shade and protection for the yacht’s uppermost deck space. Its reduced weight helps to ensure the stability of the vessel, and the paint-ready finish with HexPly XF provides Sunseeker with more options for customizing its color to the individual needs of its clients.
 
HexPly XF is a lightweight, non-woven semi-preg that eliminates the need to use a traditional in-mold gel coat. The innovative surface technology significantly reduces the costly and time-consuming refinishing work typically required to impart a paint-ready finish to prepreg or semi-preg parts, and yields lightweight, consistent components in short cycle times.

Working with Sunseeker, Hexcel developed a material format, a laminate ply sequence, and a production process that satisfied the structural requirements for the hardtop and enabled the yacht builder’s production team to lay up and cure the part in a single shot – slashing cycle times.

Hexcel supplies Sunseeker with a HexPly XF product that comprises both the surface layer and the first structural reinforcement ply, eliminating the need for a cosmetic barrier coat. Neither the HexPly XF surface layer nor the following layers of HexPly SuperFIT require time-consuming debulking steps – significantly reducing lay-up time – and both are based on Hexcel's rapid-curing M79 epoxy resin system. Adhesive resin films are not needed to bond the hardtop’s foam core, as the resin content of the SuperFIT plies has been adjusted to further reduce overall process time.

Once de-molded, the cured hardtops are inspected before they are passed to Sunseeker’s finishing and painting technicians for final preparation and painting. The HexPly XF resin surface allows the yacht builder’s quality technicians to inspect the laminate below quickly and easily, ensuring the quality and consistency of the structural reinforcement plies.

“Composite materials that improve our production processes, as well as great technical support, are what makes working with Hexcel such a success story," said Stuart Vaughan-Jones, Composite Development Manager, Sunseeker. "With the switch from gel coat and resin infusion to HexPly XF and SuperFIT in the new hardtops, we are now building lighter, more consistent parts, more quickly than before, with a higher quality surface finish. XF really has ticked all the boxes.”  

Garth Thomas, Account Manager – Marine, Hexcel, said: "With the HexPly XF surface technology now well established, XF will soon be used in other large moldings where minimizing weight is critical, as well as additional hardtops across the Sunseeker model range."

(c) Kornit
13.01.2022

Blur uses Kornit Digital for Scalability, Operational Versatility, 24-Hour Production

Kornit Digital Ltd. announced that Portuguese textile specialist Blur has installed the Kornit Presto S with Softener solution for sustainable, single-step direct-to-fabric production of multiple fabrics in any quantity. The print services provider, which supports the production needs of high fashion brands has previously installed multiple Kornit Atlas and Avalanche systems for industrial-scale digital direct-to-garment (DTG) production on demand.

Using Kornit’s efficient, eco-conscious, proprietary technology and consumables, Blur provides rapid fulfillment of orders ranging from a single piece to mass production, with an average order of about 500 items. Since implementing the Kornit Presto S, the system has been in operation day and night, producing samples during normal business hours and fulfilling diverse incoming orders overnight.

Kornit Digital Ltd. announced that Portuguese textile specialist Blur has installed the Kornit Presto S with Softener solution for sustainable, single-step direct-to-fabric production of multiple fabrics in any quantity. The print services provider, which supports the production needs of high fashion brands has previously installed multiple Kornit Atlas and Avalanche systems for industrial-scale digital direct-to-garment (DTG) production on demand.

Using Kornit’s efficient, eco-conscious, proprietary technology and consumables, Blur provides rapid fulfillment of orders ranging from a single piece to mass production, with an average order of about 500 items. Since implementing the Kornit Presto S, the system has been in operation day and night, producing samples during normal business hours and fulfilling diverse incoming orders overnight.

Mariano Dias, CEO at Blur, believes Kornit technology empowers his business to adapt quickly to the constantly evolving needs of his clients, which include both larger established brands seeking large quantities and ambitious designers seeking to build a brand with limited risk or investment. In many cases, they are fulfilling different types of designs for clients serving both Europe and North American markets.
“The quality is just outstanding, and some clients only want to print with Kornit technology”, said Dias. “We are extremely happy with Kornit’s collaboration, and our printers are working perfectly around the clock. Any textile printing company looking to move into fashion and work with famous brands will need both roll-to-roll and DTG capabilities. Our recommendation for success is to buy the Kornit Atlas and Kornit Presto printers.”

He added that Blur’s success with its current Kornit systems, as well as increased demand for sustainably-produced textiles, has the business considering the addition of a second Kornit Presto S to accommodate additional volumes.

“As with many of our customers, Blur was built around more traditional textile operations—in their case embroidery—before discovering the vast potential for growth and versatility offered by quick, efficient, digital production on demand,” said Chris Govier, Kornit Digital Europe, Middle East, and Africa President. “Whether you’re serving an internationally-known fashion house looking for more agile fulfillment and simpler supply chains, or the independent creator hoping to bring unique inspirations to life, Kornit’s product portfolio offers continuous opportunities to answer market needs, create new markets, and scale upwards under any conditions.”

Source:

Kornit / pr4u

RGE Gives Sustainable Fashion a Boost with New Partnerships in Singapore (c) RGE Group
From Left to Right: Tey Wei Lin, President of RGE, Sim Ann, Senior Minister of State for Foreign Affairs and National Development, Low Yen Ling, Minister of State for Trade & Industry and Culture, Community and Youth, and Wilson Teo, President of TaFF after signing of strategic partnership between TaFF and RGE to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education
01.12.2021

RGE Gives Sustainable Fashion a Boost

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

  • RGE has formalised two new partnerships in Singapore to advance sustainable fashion.

The first is a three-year strategic partnership with the Textile & Fashion Federation (TaFF) to advocate sustainable industry practices within Singapore and the region, through programme implementation, research, and education. The second is a five-year research collaboration with Nanyang Technological University, Singapore (NTU Singapore) on innovation in textile recycling technology.

The partnership with TaFF on its fashion sustainability programme was officially launched today. Through industry talent development and capacity building, raising corporate and consumer awareness, and innovation promotion, TaFF seeks to galvanise the fashion ecosystem towards redefining sustainable fashion.

Wilson Teo, President of TaFF, said, “Our strategic partnership with RGE marks a step forward for TaFF to expand our sustainability ecosystem throughout the fashion value chain, from materials, manufacturing, brands and technology to solutions. We have set up a Steering Committee that spans across the value chain, as a model for the industry. Together with our collaborators, we will continue to equip enterprises in the journey of sustainability. We will also work with communities to build awareness in responsible consumption and recycling.”

RGE has committed to provide nearly S$3 million funding over three years to support TaFF’s fashion sustainability programme. In addition, RGE’s Vice Chairman Bey Soo Khiang joins the programme’s Steering Committee as its Vice Chairperson.

Tey Wei Lin, President of RGE, said, “As a Singapore-based company and the world’s largest viscose producer, our business is well-positioned to support the country’s desire to advance sustainable development and to create a green economy. Our collaboration with TaFF and NTU is an investment of financial and other resources to create meaningful impact, not just within Singapore but also in the region. As part of our US$200 million investment commitment into next-generation textile fibre innovation and technology, we seek to work with innovators, industry partners, research institutions and academia to scale up solutions that will deliver cleaner and more circular cellulosic textile fibre to the masses at affordable prices.”

The launch of TaFF’s fashion sustainability programme follows the roll-out of the Enterprise Sustainability Programme (ESP) by Enterprise Singapore on 1 October 2021, which supports enterprises in their sustainability initiatives and helps them capture new opportunities in the green economy.

“Industry partnerships are pertinent to uplift capabilities of enterprises. We are very encouraged by TaFF’s efforts to drive sustainability in the textile and fashion sector as trade associations and chambers play a key role in strengthening sector-specific capabilities,” said Alan Yeo, Director of Retail & Design at Enterprise Singapore. “Collaborations with corporate partners such as RGE will also help accelerate this process. This is a good start and we hope to eventually see more companies across all sectors start to integrate sustainability alongside their growth.”

The launch event was graced by Minister of State for Trade and Industry Low Yen Ling, TaFF’s patron and Senior Minister of State for National Development and Foreign Affairs Sim Ann, CEO of Enterprise Singapore Png Cheong Boon, as well senior representatives from TaFF and RGE.

The official launch of the research collaboration with NTU is expected to take place next year. A key desired outcome from the collaboration is to complement RGE’s pilot urban-fit textile recycling plant in Singapore.

16.11.2021

RGE: Second Annual Update on Textile Fibre Innovation and Technology

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Royal Golden Eagle (RGE) has released its 2021 progress report on its commitment to invest USD200 million in next-generation textile fibre innovation and technology over a ten-year period which started in 2019.

The annual report provides an update on the activities undertaken by RGE and its business groups (Sateri, APR, APRIL, Bracell) involved in the fashion value chain to advance its ambition towards closed-loop, circular and climate-positive cellulosic fibre.

In 2021, Sateri achieved full compliance with the emission limits set out in the European Union Best Available Techniques Reference Document (EU-BAT BREF) for all of its five viscose mills in China, two years ahead of schedule. Bracell completed construction of the world’s largest and greenest new generation pulp mill in São Paulo which uses cutting-edge technology for fossil fuel-free generation.

Amid the COVID-19 pandemic continuing to restrict travel and collaboration, RGE persisted in building upon existing partnerships, while entering into new agreements. Sateri strengthened its strategic collaboration with Infinited Fiber Company, participating in the company’s EUR30 million funding round, which attracted new and existing investors such as H&M Group, Adidas, BESTSELLER and Zalando.

New partnerships formed by RGE included a five-year textile recycling research collaboration with Nanyang Technological University Singapore, and a three-year strategic partnership with the Textile and Fashion Federation Singapore which seeks, among others goals, to advance research and innovation in circular economy approaches to fashion waste in Asia.

RGE’s in-house R&D team has made good progress in advancing its textile-to-textile project, focusing on producing quality viscose using recycled cotton textiles as feedstock. To support plans to build a textile recycling facility in Indonesia, and as part of commercial feasibility analysis, studies examining the availability of textile waste and textile recycling landscapes in China, Indonesia, Sri Lanka and Bangladesh were completed.

Sateri remains on track in developing a product with 50 per cent recycled content by 2023, and to reach 100 per cent by 2030. It also aims for 20 per cent of its feedstock to contain alternative or recycled materials by 2025. In this similar vein, APR will source 20 per cent of its feedstock from alternative or recycled materials by 2030.

Source:

RGE / Omnicom Public Relations Group

10.11.2021

New JEC Group Publication

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

  • COMPOSITES SUSTAINABILITY REPORT 2021  

JEC Group in collaboration with EuCIA has published the first edition of the Composites Sustainability report 2021. This report seeks to give highlights about the part composite materials are playing in creating the sustainable European economy of the future.   

The contents of the book are comprehensive: starting with discussions around the widely recognised Life  Cycle  Assessment  methodology  for  calculating  the  environmental  impact  of  products,  it then 
moves through a series of analyses and case studies presenting the Circular Economy approach and ranging from raw materials (including bio-based) to industrial components.    

The purpose of the work, rather than results, which quickly become obsolete, is to give examples of approaches contributing to and moving towards sustainability. To do so, JEC Group has arbitrarily split
the value chain into five parts:
• Background, LCA, circular economy ;  
• Concept, design, raw materials ;  
• Production, processes, waste ;  
• Recycling, recovery ;
• Applications. 
 
The book “Composites sustainability Report 2021” is for sale online.

DyStar Releases 2020 – 2021 Integrated Sustainability Report (c)dystar
Sustainability Performance Report 2020-2021
13.10.2021

DyStar Releases 2020 – 2021 Integrated Sustainability Report

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

DyStar is pleased to announce the release of its eleventh annual Sustainability Performance Report. The report is written in accordance with the GRI Standards: Core option, while using the Integrated Reporting <IR> framework to communicate how DyStar drives value creation across multiple stakeholder groups in six capital categories, namely financial, manufactured, intellectual, natural, human capital and social capital.

In FY2020, COVID-19 has continued to present its challenges, such as the shortage of raw materials and rising freight costs. Gloomy global demand has also resulted in some raw and product material wastage in production plants worldwide, leading to increased non-hazardous waste output for FY2020. DyStar recognizes these global factors in play and will continue to make active efforts within the organization’s capability to reduce its environmental footprint in the years ahead.

The Group has set its sight on achieving the 2025 sustainability target of reducing its production footprint by 30% from 2011 levels for every ton of production. “We will continue to innovate and develop a wide range of products and processes that improve environmental performance and reduce carbon footprint across our value chain”, said Mr Xu Yalin, Executive Board Director of DyStar Group.

Mr Eric Hopmann, CEO of DyStar Group added: “We are also developing various projects in anticipation of future demands from customers as well as adopting more environmentally friendly technologies and improve our workflows and processes. Some of our projects include traceability programs, adopting renewable energy technologies, and digitalizing our business processes.” Understanding the importance of collaborative efforts to drive sustainability across the value chain, DyStar seeks to continually support industrial innovations and develop strategic partnerships to work towards becoming a sustainable and trusted leader in the industry.

Source:

DyStar Press Info

During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever. (c) PREMIUM GROUP
SEEK
06.10.2021

SAVE THE DATE: Frankfurt, January 2022

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

  • HIGHER, FASTER, FURTHER ! During the first physical Frankfurt Fashion Week in January 2022, PREMIUM GROUP will show more novelties than ever.

The anticipation is rising! With the actual move to Frankfurt in January 2022, Anita Tillmann, Jörg Arntz and the teams will not only present further developed versions of the PREMIUM and SEEK fashion fairs, but will also celebrate a major B2C festival for the first time with THE GROUND.

More than ever, the Berliners‘ passion for people and fashion, but also for business and trading, is at the heart of all their events. And where better to combine all this than in the power metropolis of Frankfurt am Main.

„No city in Germany - no city in Europe - stands for business relevance and trading power as much as Frankfurt am Main,“ explains Tillmann. „We now have a unique opportunity to actively shape the future together. PREMIUM GROUP provides the industry with the platform, the brands with the creative content. In addition, we do what we do best, introduce the right players to each other and connect them. We bring together the movers and shakers who have the same drive as we do. With this new mix of location, entertainment, creative industry and trading focus, we are creating a unique momentum after the pandemic - January is when the big deals are made and the c ourse is set for the future.“

To achieve this goal, the PREMIUM GROUP teams have also given the proven successful formats PREMIUM and SEEK a new coat of paint. More space, new areas and shorter distances provide visitors with a completely new trade event experience. Trends, brands and events can be discovered together with new and well-known partners - for the first time all in one place!

And PREMIUM, which is already entering its 19th year in January, is also showing a new side in Frankfurt. Instead of being spread out like in Station-Berlin, in Frankfurt all brands show their collections in one big hall. „We are so excited to finally unite all exhibitors in one hall. This way we create a universe with many different worlds - colorful and exciting,“ says Wiebus. „We are in close exchange with all the protagonists throughout the year and continue to develop the concepts together. The entire industry is positive about coming together in Frankfurt. Everyone is keen to experience and create something completely new! We offer the framework for this - that is our strength.“

And the Berliners have another surprise in store for the Frankfurt debut: With THE GROUND, they are organizing a large fashion festival for young end consumers for the first time. Responsible for the event concept, in addition to Tillmann, Arntz and the PREMIUM GROUP- team, is B2C expert Kai Zollhöfer, who already made the Bread & Butter by Zalando a crowd puller. “THE GROUND is a B2C festival aimed at a young, purpose-driven generation. This new generation has a strong stance on current social and environmental challenges and expects brands to reflect them. The overriding themes at THE GROUND are therefore sustainability, diversity and equality”, said Zollhöfer.

The 3-day event offers brands the opportunity to interactively exhibit purpose-driven stories and products. In addition to the thematic focus on fashion, brands from the fields of wellbeing, beauty, mobility and technology will also present innovative products and solutions.

31.08.2021

DSM and SABIC: Creating recycled-based Dyneema®

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, and SABIC, a global leader in the chemical industry, announced a collaboration to create recycled-based Dyneema®. Through a joint pilot with multiple CirculariTeam® members, the manufacturing and usage of Dyneema® using mixed plastic waste as feedstock (via mass balance approach) will be successfully demonstrated. It is an important step toward the future goal of fully closing the loop by delivering Dyneema® made from ultra-high molecular weight polyethylene (UHMwPE) waste. This collaboration underlines DSM’s and SABIC’s efforts to accelerate a circular economy for materials.

Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, and SABIC, a global leader in the chemical industry, announced a collaboration to create recycled-based Dyneema®. Through a joint pilot with multiple CirculariTeam® members, the manufacturing and usage of Dyneema® using mixed plastic waste as feedstock (via mass balance approach) will be successfully demonstrated. It is an important step toward the future goal of fully closing the loop by delivering Dyneema® made from ultra-high molecular weight polyethylene (UHMwPE) waste. This collaboration underlines DSM’s and SABIC’s efforts to accelerate a circular economy for materials.

By working together with members of CirculariTeam®, DSM will produce recycled-based Dyneema® made using SABIC’s certified circular ethylene as a pilot project in both a sailing rope and a pelagic trawl net application. The circular ethylene, from SABIC’s TRUCIRCLE™ portfolio, uses mixed plastic waste as feedstock (mass balance approach), which not only contributes to preventing valuable plastic from becoming waste and the avoidance of carbon emissions compared to incineration, but it will also help preserve fossil resources. These pilots are an important early-stage milestone in the journey toward making fully circular Dyneema® from HMPE post-production and post-consumer waste.

Jon Mitchell, Managing Director at Marlow Ropes: “We’re proud to be one of the first manufacturers to integrate recycled-based Dyneema® within our products and demonstrate the material’s feasibility. By collaborating with materials science pioneers such as DSM and SABIC, we are able to create products that not only deliver superlative functional performance but also have a lower environmental impact. Our products are trialed and tested by professional offshore sailing teams including 11th Hour Racing Team, a proud partner of ours at Marlow, with whom we share a progressive approach to seeking sustainable solutions: no more business as usual."

Klaus Walther, Managing Director at Gleistein: “Warm congratulations to DSM and SABIC for pushing the boundaries of science to deliver a truly unique product. We’re proud that our ropes can be produced from what once was typical household plastic waste. This is an important stepping stone towards becoming circular. It will enable our customer Maritiem BV to further develop high-tech fishing gear whilst contributing to the circular economy. Not to forget Cornelis Vrolijk Fishing Company, who again illustrate their commitment to Corporate Social Responsibility by introducing this concept in fishery.”

More information:
DSM Dyneema SABIC plastic waste
Source:

EMG for DSM

(c) lululemon
18.08.2021

Genomatica partners with lululemon bring bio-nylon to apparel

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

  • Renewably Sourced Materials to Help Replace Petrochemicals in Apparel for a Healthier Planet

lululemon athletica inc. (NASDAQ:LULU) announced a multi-year collaboration with sustainable materials leader Genomatica to bring renewably-sourced, bio-based materials into lululemon’s products. This represents lululemon’s first-ever equity investment in a sustainable materials company and Genomatica’s largest partnership within the retail industry. Together, the two companies will create a lower-impact, plant-based nylon to replace conventional nylon, which is the largest volume of synthetic material currently used to make lululemon products.

Genomatica uses biotechnology and fermentation to convert plant-based ingredients into widely used chemical building blocks, like those used to make nylon. These building blocks are converted to pellets and yarns, and the companies will be working closely with lululemon’s fabric supply chain to incorporate this material into future products. Through this collaboration, the companies seek to create positive change within the $22B global nylon market by building more sustainable supply chains.  

More information:
lululemon Genomatica bio-based nylon
Source:

Method Communications

12.07.2021

SUPREME GREEN COTTON® in the latest Collections of three Brands

SUPREME GREEN COTTON®, the water-saving smart-tech yarn by Varvaressos has been chosen by Diesel, Champ Blanc and Muntagnard, and won the Gold Award at the Greek Exports Forum & Awards 2020.

Thanks to a pioneering satellite-powered drip irrigation system, SUPREME GREEN COTTON® saves up to 40% of water. The range of yarns is entirely Made in Europe and comes with influential sustainable verifications. The MADE IN GREEN by OEKO-TEX® label guarantees that the yarns have been tested for harmful substances and manufactured using sustainable processes under socially responsible working conditions in accordance with STeP by OEKO-TEX®. Complete transparency and traceability are guaranteed throughout the whole production and supply chain by the unique diafania SI platform, powered via blockchain technology.

Global clothing and lifestyle Italian premium jeans brand Diesel stands out for its unique mindset and sustainable imprint. That’s why it chose SUPREME GREEN COTTON® for its collection ‘Green Label’ and ‘NightCrush’ as well as its ‘Malign’ jersey T-shirts, available in two different colours and prints.

SUPREME GREEN COTTON®, the water-saving smart-tech yarn by Varvaressos has been chosen by Diesel, Champ Blanc and Muntagnard, and won the Gold Award at the Greek Exports Forum & Awards 2020.

Thanks to a pioneering satellite-powered drip irrigation system, SUPREME GREEN COTTON® saves up to 40% of water. The range of yarns is entirely Made in Europe and comes with influential sustainable verifications. The MADE IN GREEN by OEKO-TEX® label guarantees that the yarns have been tested for harmful substances and manufactured using sustainable processes under socially responsible working conditions in accordance with STeP by OEKO-TEX®. Complete transparency and traceability are guaranteed throughout the whole production and supply chain by the unique diafania SI platform, powered via blockchain technology.

Global clothing and lifestyle Italian premium jeans brand Diesel stands out for its unique mindset and sustainable imprint. That’s why it chose SUPREME GREEN COTTON® for its collection ‘Green Label’ and ‘NightCrush’ as well as its ‘Malign’ jersey T-shirts, available in two different colours and prints.

Thee Swiss brand Muntagnard believes in «sustainability» as a powerful lever for innovative solutions for people who go their own way and think outside the box to advance sustainable development. Muntagnard rethinks textiles - from the sewing thread to the label – selecting only sustainable materials and minimizing the use of plastic to the bone while seeking sensible, biodegradable textile alternatives. The MANGOLA collection of T-sets is 100% made of SUPREME GREEN COTTON®.

CHAMP BLANC is a responsible French brand renown for its ready-to-wear men clothing and for its strong commitment to traceability. The brand has been working for nearly 8 months on the design of the "Traceable T-shirt" made of 100% SUPREME GREEN COTTON®. The result is a high quality and finishing t-shirt to make it last. By relying on existing technologies, the entire production chain is traceable and can be discover thanks a QR-code on the label.

SUPREME GREEN COTTON® has also been bestowed with the influential Gold Award in the “Top Branded Export Product” category of the Greek Exports Forum & Awards 2020

Source:

Varvaressos / GB Network Marketing & Communication

(c) PREMIUM Exhibitions GmbH
02.07.2021

PREMIUM Group goes digital on FFW STUDIO

Live panels, future talks, brand experiences, stories, entertainment: from July 5th to 9th, the protagonists of the fashion industry will meet digitally for the first time on a common platform, the FFW STUDIO. Launched by the makers of Frankfurt Fashion Week and Europe's largest fashion fairs, PREMIUM, SEEK & Neonyt, the new content hub at www.frankfurt.fashion offers an individually designed program as an alternative to the physical event.

And the classic trade fair business will also find a digital representation this summer: Together with long-term partner JOOR, Anita Tillmann and team are presenting the PREMIUM + SEEK Passport platform this season. Here retailers can discover and order the collections of over 12,500 brands online and be inspired by various content formats.

Live panels, future talks, brand experiences, stories, entertainment: from July 5th to 9th, the protagonists of the fashion industry will meet digitally for the first time on a common platform, the FFW STUDIO. Launched by the makers of Frankfurt Fashion Week and Europe's largest fashion fairs, PREMIUM, SEEK & Neonyt, the new content hub at www.frankfurt.fashion offers an individually designed program as an alternative to the physical event.

And the classic trade fair business will also find a digital representation this summer: Together with long-term partner JOOR, Anita Tillmann and team are presenting the PREMIUM + SEEK Passport platform this season. Here retailers can discover and order the collections of over 12,500 brands online and be inspired by various content formats.

FFW STUDIO broadcasts live from the conferences of Frankfurt Fashion Week, the Frankfurt Fashion SDG Summit presented by Conscious Fashion Campaign in cooperation with the United Nations Office for Partnerships and the conference "The New European Bauhaus - Workshop of the Future", organized by the Fashion Council Germany in cooperation with the Frankfurt Fashion Week. Both will take place for the first time as part of the Frankfurt Fashion Week. With over 130 speakers, the Fashionsustain conference is also a central component of the FFW STUDIOS.

Source:

PREMIUM Exhibitions GmbH

(c) German Popp. Dr. Marina Crnoja-Cosic (Kelheim Fibres) and Linda Dengler (Microbify)
28.06.2021

Kelheim Fibres presents award at “Plan B” start-up competition

For the fourth time, the international start-up competition "Plan B - Biobased.Business.Bavaria." organised by BioCampus Straubing honoured the best new business ideas in the field of biobased solutions.

Dr Crnoja-Cosic, Director New Business Development, and Matthew North, Commercial Director, represented Kelheim Fibres at the award ceremony. The manufacturer of special viscose fibres has been working with the BioCampus Straubing for many years and is a supporter of the competition, this year as prize sponsors. In this capacity, Dr. Crnoja-Cosic congratulated the newly founded team of Microbify GmbH on their third place and presented them with a cheque for 3,000 Euros. As a spin-off from the University of Regensburg, Microbify works, among other things, on the use of old natural gas storage facilities for the production of green natural gas using extremophilic microorganisms.

For the fourth time, the international start-up competition "Plan B - Biobased.Business.Bavaria." organised by BioCampus Straubing honoured the best new business ideas in the field of biobased solutions.

Dr Crnoja-Cosic, Director New Business Development, and Matthew North, Commercial Director, represented Kelheim Fibres at the award ceremony. The manufacturer of special viscose fibres has been working with the BioCampus Straubing for many years and is a supporter of the competition, this year as prize sponsors. In this capacity, Dr. Crnoja-Cosic congratulated the newly founded team of Microbify GmbH on their third place and presented them with a cheque for 3,000 Euros. As a spin-off from the University of Regensburg, Microbify works, among other things, on the use of old natural gas storage facilities for the production of green natural gas using extremophilic microorganisms.

Driving the change from a fossil-based to a bio-based economy is a declared goal of Kelheim Fibres - their speciality fibres replacing fossil materials in more and more applications. To this end, the fibre manufacturer seeks inspiration and exchange within its own industry as well as with innovation partners from outside the industry, start-ups and science in an open innovation approach.

More information:
Kelheim Fibres Microbify GmbH
Source:

Kelheim Fibres GmbH

11.05.2021

Devan launches bio-based softener and quick-dry finish

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan Chemicals recently added two more products to its range of bio-based textile finishes. One being a softener, the other one a quick-dry finish. Both are derived from vegetable oils and are in line with the company’s latest innovations on bio-based chemistry.

Due to the Covid-pandemic, serving as an accelerator for a worldwide green economy, the textile industry is increasingly seeking more sustainable and products fit-for-circular programs. According to McKinsey & Company, the textile industry will experience innovation surrounding sustainably sourced raw materials and bio-based chemical additives to accommodate increasing consumer demand.

Devan launched its first bio-based technology in 2019 and is fully committed to making bio-based versions of their existing textile finishes. ‘We have put ourselves on a mission to be able to extend our Bio-Based range further”, says Sven Ghyselinck, CEO of Devan. “We wanted to make an even bigger impact on circularity than before, therefore we looked into what fabric producers use a lot: softeners and moisture management systems. Only by focusing more on the large volume products, can we support the industry to have a bigger impact on sustainability. After the growing success of our natural antimicrobial BI-OME NTL, we are proud to now introduce our new natural Passerelle line”.

Passerelle Soft NTL is a durable softness technology based on vegetable ingredients. The technology is wash durable and can be used with natural fibres like hemp, cotton, but is also fit for synthetic fibres like rPES, PA. The bio content of the technology is above 85% (ASTM D6866-20).

Passerelle Quick-Dry NTL is a moisture management technology also based on vegetable ingredients. This bio-based finish enables high wicking and evaporation capability which helps to evaporate water/sweat easier and faster. The technology is also > 60% (28 days) biodegradable according to OECD 301B.

Checkpoint Systems erhält als erster RFID-Etikettenhersteller die ARC-Zertifizierung mit dem UCODE 9 IC von NXP (c) Checkpoint Systems
Checkpoint Systems_Hoodie Vortex U9
05.05.2021

Checkpoint Systems achieves the ARC Certification

  • Checkpoint becomes the first RFID label manufacturer to achieve ARC certification with NXP’s UCODE 9 IC

Checkpoint  Systems,  a  vertically  integrated  supplier  of RFID  solutions  for  retail,  has again  demonstrated  its  commitment  to  innovation  by becoming the first manufacturer to have an RFID inlay featuring the new NXP UCODE 9 IC certified by Auburn University’s ARC Laboratory.

The  announcement  follows  news  that  Checkpoint  recently  became  the  first  company  to achieve ARC-certification for its Impinj M700-based inlays. By setting another new standard for the  industry,  Checkpoint  are  enabling  retailers  around the  world to  further  improve  their inventory visibility, reduce costs, improve performance and increase their overall profitability.

Delivering enhanced performance
Delivering the same ARC certifications as the Vortex U8 (Spec G, K and Q), the new Vortex U9 goes one step further by meeting the requirements of Spec N.

  • Checkpoint becomes the first RFID label manufacturer to achieve ARC certification with NXP’s UCODE 9 IC

Checkpoint  Systems,  a  vertically  integrated  supplier  of RFID  solutions  for  retail,  has again  demonstrated  its  commitment  to  innovation  by becoming the first manufacturer to have an RFID inlay featuring the new NXP UCODE 9 IC certified by Auburn University’s ARC Laboratory.

The  announcement  follows  news  that  Checkpoint  recently  became  the  first  company  to achieve ARC-certification for its Impinj M700-based inlays. By setting another new standard for the  industry,  Checkpoint  are  enabling  retailers  around the  world to  further  improve  their inventory visibility, reduce costs, improve performance and increase their overall profitability.

Delivering enhanced performance
Delivering the same ARC certifications as the Vortex U8 (Spec G, K and Q), the new Vortex U9 goes one step further by meeting the requirements of Spec N.

All aspects of the retail supply chain benefit from the increased read and write sensitivity of the  Vortex  U9.    The  11%  increase  in  read  distance,  decreases the time  for  inventory  cycle counts in both sparse or densely populated environments.  It also increases the compatibility of  smaller  RFID  labels with  RFID  Point  of  Exit  (PoE)  or  loss  prevention systems.  The  write sensitivity is significantly improved which is beneficial when encoding labels in densely packed cartons during source tagging and bulk encoding operations.

Finally,  the  new  Vortex  U9  will  provide  retailers  with  added  value  when  it  comes  to sustainability. NXP’s UCODE 9 RFID IC is 18% smaller than its predecessor, reducing the carbon footprint on an individual IC basis.

Scott Mitchell-Harris, Group Vice President Checkpoint Systems, commented:  “The investment Checkpoint has made over the past few years in our manufacturing facilities is evident. We have one of the most talented development teams who are continually seeking out the latest technology with new ideas to deliver market leading label designs.”

Checkpoint’s Vortex range delivers high read rate performance in semi-automated  physical inventory control and RFID as EAS. Vortex is ISO18000-6C compliant and can be encoded and printed tocarry EPC data in several formats -RFID EPC global protocol, printed bar code and human readable text.

Source:

Carta GmbH