From the Sector

Reset
99 results
Award winners with foundation chairman, foundation MD and professors (c) VDMA e.V. Textile Machinery
Award winners with foundation chairman, foundation MD and professors
08.12.2023

Walter Reiners Foundation honours young engineers

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

This year's promotion award in the Diploma/Master's category, endowed with prize money of 3,500 euros, went to Flávio Diniz from RWTH Aachen. The subject of his Master's thesis was the feasibility of manufacturing ultra-thin carbon fibres.

The award ceremony 2024 will take place in April at the VDMA stand at the Techtextil fair in Frankfurt.

A Dress For Venice 2023 Illustration by Jacopo Ascari for A Dress For Venice 2023
05.09.2023

A Dress For Venice - Debut at the International Film Festival

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

The project "A Dress For Venice" get on the Red Carpet at the Venice Film Festival to advocate for sustainability. September 7th, actress Margot Sikabonyi will wear a dress from the collection designed by conscious designer Tiziano Guardini, illustrated by artist Jacopo Ascari, and produced by Martina Vidal Venezia, with the following materials:

  • Bemberg™: The innovative and biodegradable fiber from the Japanese company Asahi Kasei.
  • Burano lace: Produced by the historic Martina Vidal Venezia for four generations.

"Returning to Venice and experiencing the emotions of this place and the artists who have enriched it is exhilarating," says Tiziano Guardini. "It's a work based on volumes, shapes, three-dimensionality, colours and materials research… from Mariano Fortuny to the Ottoman Empire's Turcherie."

Illustrator Ascari adds, "I started with a careful study of the works of Canaletto, Guardi and Bellotto, masterpieces of Eighteenth-Century Vedutismo. I portrayed new perspectives on the city's splendour, enhanced by Guardini's vibrant shapes and color choices."

On Thursday, September 7th, at 12:30, in the Veneto Region's room at the Hotel Excelsior on Lido, Elena Donazzan, Councilor for Education, Training, Employment, and Equal Opportunities, will present the project alongside its creators Laura Scarpa and Lorenzo Cinotti of Venezia da Vivere, designer Tiziano Guardini, artist Jacopo Ascari, and actress Margot Sikabonyi.

"We conceived A Dress For Venice for Homo Faber in 2019, to celebrate Venice's 1600 years of craftsmanship," explains Laura Scarpa. "This year, the research extends to sustainable innovation thanks to an international team of designers, artisans and companies," continues Lorenzo Cinotti.

The project reaffirms Venice's role as an international laboratory to reflect on the planet's future. "A Dress For Venice" is a limited-edition collection realized with the support of a network of companies identified by the Tavolo Veneto della Moda (Confartigianato, CNA, Confindustria, Confesercenti and Confcommercio of Veneto), the global platform C.L.A.S.S. (Creativity Lifestyle and Sustainable Synergy), the partnership of Camera Buyer Italia and the media partnership of The Italian Rêve.

The presentation of the collection to buyers will take place at the Marina Guidi showroom in mid-September, while it will have its dedicated exhibition on Friday, October 20th, during the Venice Fashion Week.

"A Dress for Venice" is endorsed by the Comune di Venezia, the Regione del Veneto, and Homo Faber - Fondazione Cologni dei Mestieri d’Arte, which promotes worldwide high craftsmanship and savoir-faire.

Partners in the project Infinity srl and Tessitura Grisotto, renowned Italian textile manufacturers who expertly craft Bemberg™ fiber into exquisite fabrics. Creazioni Digitali, a specialized company in sublimation digital printing, carries out the prints on Bemberg™ textiles with its unique project GreenDrop; with inks that reduces the water consumption.

Other partners include Marina Iremonger, Camera Buyer Italia, and the Tavolo Veneto della Moda, representing Confartigianato, CNA, Confindustria, Confcommercio, and Confesercenti.

More information:
Venice Asahi Kasei Bemberg™
Source:

C.L.A.S.S. Eco Hub

18.08.2023

Baldwin Launches New PrintEnomic$ Online Resource

Baldwin Technology Co. Inc. has launched PrintEnomic$, a new online resource of specialized eBooks and resources for corrugated, narrow web and sheet-fed and web offset printers at PrintEnomics.com.

The collection of Baldwin videos, podcasts and instructional guides are available for free and without firewalls to help maximize printer profitability. The eBooks analyze trends, issues, and technology options specific to printers in all three categories.

More than 5,000 print industry professionals have already downloaded or viewed earlier, limited-release eBooks “Untangling the Web” for narrow web and “From Beast to Beauty” for corrugated. The addition of “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” for sheet-fed and web offset printers completes the comprehensive PrintEnomic$ portfolio.
 
Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – the eBooks explore pressing topics including sustainability, labor challenges, counterfeiting, and brand protection.

Baldwin Technology Co. Inc. has launched PrintEnomic$, a new online resource of specialized eBooks and resources for corrugated, narrow web and sheet-fed and web offset printers at PrintEnomics.com.

The collection of Baldwin videos, podcasts and instructional guides are available for free and without firewalls to help maximize printer profitability. The eBooks analyze trends, issues, and technology options specific to printers in all three categories.

More than 5,000 print industry professionals have already downloaded or viewed earlier, limited-release eBooks “Untangling the Web” for narrow web and “From Beast to Beauty” for corrugated. The addition of “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” for sheet-fed and web offset printers completes the comprehensive PrintEnomic$ portfolio.
 
Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – the eBooks explore pressing topics including sustainability, labor challenges, counterfeiting, and brand protection.

Source:

Baldwin Technology Company Inc.

21.07.2023

Digital Textile Printing: Direct-to-Film Technology

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

In the printing industry, direct-to-film technology is having a transformative impact on the apparel decoration space. It provides a simple and affordable garment printing process that facilitates vibrant, dynamic, full-colour designs with a durable print. It opens up opportunities for digital print service providers (PSPs) to expand their product offerings in the textile industry, their network of potential customers and expand the range of fabrics they can print on.

Direct-to-film vs. Screen Printing
Direct-to-film printing is the process of digitally printing directly onto a special transfer film sheet. The printed film is subsequently sprinkled with a hot-melt powder and heated. Once the transfer sheet is cured and dried, it can be heat-pressed onto a variety of fabrics to create premium transferred designs for customised merchandising, sportswear, and an array of other promotional applications for the textile market. Compared with traditional screen printing, the plate creation required for that process is far too time-consuming. Not only this, but it does not match direct-to-film’s ability to produce vivid colours and quality details such as shapes, lettering, and motifs often sought after in the promotional and merchandising space for bespoke textiles.

The Mimaki TxF150-75
Mimaki’s first direct-to-film inkjet printer is the TxF150-75, a fitting extension to the 150 series, with a maximum printing width of 80cm. Offering a stable printing plotter, the model’s built-in ink circulation system and degassed ink pack are resolutions to common direct-to-film challenges such as poor ink ejection and white ink clogging. The new printer also includes core Mimaki features including NCU (Nozzle Check Unit) and NRS (Nozzle Recovery System) for stable, uninterrupted print production. Operating in harmony with the textile printer itself is Mimaki’s ECO PASSPORT by OEKO-TEX® certified water-based pigment textile inks, formulated especially for the TxF150-75. Coupled with Mimaki’s RasterLink7 RIP software, users are offered end-to-end oversight and efficiency from creative design to final product.

In addition, and in line with Mimaki’s collaborative approach to meeting customer needs, Adkins has developed an 80cm wide powder shaker cure unit to complete this ‘A brand’ direct-to-film printing solution. By offering the printer and post-processing unit at 80cm wide, customers can print larger garments with less waste and quicker production times, making the process much more cost effective.

Kornit Digital at ITMA 2023 (c) Kornit Digital
23.06.2023

Kornit Digital successfully concluded ITMA

Kornit Digital LTD., a leader in sustainable, on-demand digital fashion and textile production technologies, announced the Company successfully concluded its exhibition at ITMA 2023, experiencing high volumes of engagement with new customers from key regions, such as India, Turkey, China, Central and South America.

With its industry-first vibrant new NeoPigment™ Vivido digital inks, the Kornit Presto MAX had a strong reception at ITMA. Also taking center stage was the anticipated Kornit Apollo platform, which delivers on the industry need for automated, high-throughput digital on-demand garment decoration at scale. Built on tested Kornit MAX technology, the Apollo effectively brings sustainable digital production to the mainstream.

“Our Apollo system was welcomed at ITMA by an industry now realizing that digital is the only solution for making fashion and textile production sustainable, producing closer to the end consumer, eliminating problematic inventory, and delivering the highest quality without sacrificing profitability,” said Omer Kulka, Chief Innovation Officer at Kornit Digital.

Kornit Digital LTD., a leader in sustainable, on-demand digital fashion and textile production technologies, announced the Company successfully concluded its exhibition at ITMA 2023, experiencing high volumes of engagement with new customers from key regions, such as India, Turkey, China, Central and South America.

With its industry-first vibrant new NeoPigment™ Vivido digital inks, the Kornit Presto MAX had a strong reception at ITMA. Also taking center stage was the anticipated Kornit Apollo platform, which delivers on the industry need for automated, high-throughput digital on-demand garment decoration at scale. Built on tested Kornit MAX technology, the Apollo effectively brings sustainable digital production to the mainstream.

“Our Apollo system was welcomed at ITMA by an industry now realizing that digital is the only solution for making fashion and textile production sustainable, producing closer to the end consumer, eliminating problematic inventory, and delivering the highest quality without sacrificing profitability,” said Omer Kulka, Chief Innovation Officer at Kornit Digital.

Source:

Kornit Digital

Photo: Pexels
12.06.2023

VIATT 2024: New textile fair in Vietnam

With combined regional, global, and industry specific expertise, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Following the signing of a memorandum of understanding (MOU) in late March, Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE) announced the new international fair for the entire textile value chain. The three-day platform will be staged at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

Commenting on the new event, Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, said: “With Intertextile Apparel in Shanghai a prime example, our Texpertise Network provides the ideal global framework from which to launch this diverse, comprehensive platform for the integrated textile supply chain. VIATT itself will capture the essence of Texpertise in one platform – a diverse, one-stop sourcing event for buyers across all categories, from garments, fabrics, yarns and fibres, to textile machinery, technical textiles and nonwovens, and everything in between.”

With combined regional, global, and industry specific expertise, the Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) will make its debut from 28 February – 1 March 2024. Following the signing of a memorandum of understanding (MOU) in late March, Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE) announced the new international fair for the entire textile value chain. The three-day platform will be staged at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

Commenting on the new event, Ms Wendy Wen, Managing Director of Messe Frankfurt (HK) Ltd, said: “With Intertextile Apparel in Shanghai a prime example, our Texpertise Network provides the ideal global framework from which to launch this diverse, comprehensive platform for the integrated textile supply chain. VIATT itself will capture the essence of Texpertise in one platform – a diverse, one-stop sourcing event for buyers across all categories, from garments, fabrics, yarns and fibres, to textile machinery, technical textiles and nonwovens, and everything in between.”

Discussing the event’s potential, Mr Le Hoang Tai, Deputy Director General of the Vietnam Trade Promotion Agency (VIETRADE), said: “Vietnam is one of the world’s leading textile producers and exporters, and going from strength to strength as one of Southeast Asia’s manufacturing hubs. Our establishment has many years of experience organising trade fairs throughout Vietnam, and together with Messe Frankfurt we are excited to help international fairgoers unlock the potential of the country’s fast-growing textile market. In addition, Ho Chi Minh City’s accessibility, and Vietnam’s proximity to other leading textile-producing nations such as Bangladesh, Cambodia, China and India, make it the logical venue to host an event of this nature.”

Many international textile manufacturers have been expanding operations into Vietnam, augmenting an already strong domestic industry. According to the Vietnam Textile and Apparel Association (VITAS), the country’s textile and garment industry achieved staggering annual growth of 20 – 26% from 2018 – 2022. Participation in international trade agreements such as the Regional Comprehensive Economic Partnership (RCEP), the Comprehensive and Progressive Agreement for Trans-Pacific Partnership (CPTPP), the EU–Vietnam Free Trade Agreement (EVFTA), and the Indo-Pacific Economic Framework for Prosperity (IPEF)[2], bodes well for future growth.

As one of the world’s biggest importers of textile machinery, and a consistent importer of fabrics, yarns and fibres, garment production is the cornerstone of Vietnam’s industry. The country utilises cotton and functional materials to produce casualwear, childrenswear, swimwear, workwear, and much more, with sportswear an especially fast-growing category, and high-utility garments expected to achieve high exports.

By linking textile players from across Asia, Europe and beyond with this market, VIATT 2024 is willing to play an important part in shaping the future of Vietnam’s industry. Next year’s fair will host an extensive mix of international and domestic exhibitors covering multiple textile sub-sectors, including garments, apparel fabrics and accessories, yarns and fibres, digital printing, home textiles, technical textiles and nonwovens, textile processing, textile machinery, and more.

Exhibitors and buyers can utilise the fair’s global business matchmaking service, where connections are made based on the specific needs of each party. In addition to the fair’s main function as an international trading platform, its fringe programme will facilitate participants’ networking with industry leaders and offer diverse market insights via various seminars, forums, and panel discussions.

The Vietnam International Trade Fair for Apparel, Textiles and Textile Technologies (VIATT) is organised by Messe Frankfurt (HK) Ltd and the Vietnam Trade Promotion Agency (VIETRADE). Covering the entire textile industry value chain, the inaugural edition will be held from 28 February – 1 March 2024 at the Saigon Exhibition and Convention Center (SECC), Ho Chi Minh City.

More information:
Vietnam
Source:

Messe Frankfurt (HK) Ltd,

09.06.2023

EFI Reggiani showcases its innovations at ITMA 2023

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

At ITMA 2023, EFI™ Reggiani is presenting its sustainable Reggiani ecoTERRA pigment printing line up, the high-speed EFI Reggiani HYPER and Reggiani BOLT XS direct-to-fabric printing solutions, and EFI Inèdit end-to-end digital textile workflows.

The EFI Reggiani ecoTERRA solution is an all-in-one solution for water-based pigment printing that requires no ancillary equipment for pre- and post-treatment. By reducing water, energy and chemicals consumption in the overall process, customers can now obtain a sustainable, direct-to-fabric printing solution. For the first time at ITMA, EFI Reggiani is presenting its full ecoTERRA line up of four models, including a 340 printing width, with speeds ranging from 150 to 600 sqm/hour. This allows customers to choose the best TCO/ROI based on output volume and speed range.
 
Reggiani ecoTERRA water-based pigment inks deliver excellent wet and dry fastness properties, sharpness in detail, and durability while also ensuring printhead longevity with reduced maintenance costs. Thanks to the enhanced polymerisation and finishing unit, EFI Reggiani ecoTERRA also provides an enhanced tactile experience and fabric softness.
 
In addition to highlighting EFI Reggiani’s sustainable product offering, the company will also demonstrate the significant productivity and efficiency advantages offered by its portfolio of high-speed, high-performance digital textile printers at ITMA 2023. Attendees will discover how mass production can transition to a digital, on-demand workflow with the high speeds and high print quality of the EFI Reggiani HYPER scanning printer and the next-generation EFI Reggiani BOLT XS single-pass textile printer.

Visitors to the booth also will see EFI Reggiani’s new proprietary end-to-end digital printing workflow and the latest enhancements to EFI Inèdit digital textile software. Inèdit, now part of EFI Reggiani, is one of the leading developers of raster image processors (RIPs) and related software for digital industrial textile printing. The EFI Reggiani end-to-end workflow with Inèdit integration boosts productivity and production capabilities for digital textile print operations while ensuring maximum security for customer’s designs thanks to two-level encryption.
 
EFI Reggiani QUERY, the user-friendly, advanced data analysis tool to measure printer performance, keep track of real costs per metre, and monitor water and energy consumption, will also be demonstrated.

(c) Kornit Digital
09.06.2023

Kornit Digital presents Enhanced Presto MAX at ITMA

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

Kornit Digital LTD., a leader in sustainable, on-demand digital fashionx and textile production technologies, announced the Company is taking the power of digital fashion to new heights with enhancements to the Kornit Presto MAX system for digital fabric decoration on demand.

Designed with the fashion and home décor industry in mind, the enhanced solution presents innovative capabilities for transforming virtual concepts into custom fabrics, supplementing digital efficiency and quality with white printing on colored fabrics. The new NeoPigmentTM Vivido ink achieves darker, deeper blacks and colors and establish new fashion standards with a pigment-based process. Kornit’s patented solution offers a streamlined and completely dry process for the a sustainable fabric decoration.

At ITMA 2023, Kornit will also be displaying an end-to-end partner ecosystem – underscoring how integrated solutions ensure a smooth transition towards a digital infrastructure and enable long-term business growth. Highlighting the power of partnership alongside Kornit is Greentex.co, a supplier of textiles and apparel leveraging digitally enabled, eco-friendly waterless printing. The company will be showing Presto MAX with fabrics highlighting the depth of black inks. Working alongside Kornit, Zünd will demonstrate how its modular cutting systems is the foundation for an end-to-end “eco factory,” completing fashion decorated by Presto MAX with their digital cutting solutions. Pentek Textile Machinery joins to display the possibilities for inline, sustainable softening of fabrics for unique and demanding applications.

07.06.2023

Mimaki at ITMA 2023

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Mimaki Europe, a provider of industrial inkjet printers, cutting plotters, and 3D printers, has announced the introduction of two technologies at ITMA 2023: a Textile Pigment Transfer Printing System and the Neo-Chromato Process. These innovations are showcased for the first time, and ahead of commercial availability, at the exhibition in Milan, Italy, solidifying Mimaki's commitment to sustainable and environmentally friendly solutions in the textile printing industry.

Mimaki’s New Textile Pigment Transfer Printing System
The transfer printing method is more sustainable than both analogue and digital textile dye printing methods with zero water consumption and substantially lower CO2 emissions. The system comprises three essential elements: the Textile Pigment Ink, the Transfer System and the Textile Pigment Transfer paper, Texcol®.

Texcol® is a transfer paper pioneered by Dutch paper manufacturer, Coldenhove that allows for transferring a digital print using an environmentally friendly 3-step transfer process to create a vibrant application on a wide range of materials, including natural fibres. The design is initially printed onto the paper using a customised TS330-1600 - Mimaki’s high-volume, high-quality dye sublimation printer - and Mimaki’s new pigment inks developed for the process. The module that adapts the TS330-1600 will be available as an option for existing and new Mimaki customers in Q3 2023 but is being previewed on the Mimaki stand at ITMA.

Mimaki’s new Textile Pigment Ink is undergoing bluesign certification before commercial availability. bluesign is a renowned certification programme that ensures the highest levels of safety, environmental friendliness, and sustainability within the textile and apparel industry.

As the final stage, the Texcol® paper undergoes a one-step waterless process, through an entry-level calendar machine onto the textile of choice.

Cyclical textile technology
Mimaki is also debuting its new, unique Neo-Chromato Process, which revolutionises the reuse of coloured polyester textiles.

By decolourising polyester textiles that have been dyed using dye sublimation technologies, this innovative process allows materials to be re-printed or dyed immediately, contributing to a smaller circular economy. There is no limit to how many times reused polyester can be treated with the Neo-Chromato Process and the process itself minimises water usage and pollution by enabling the disposal of the absorbent paper and decolouring solvents used in the process as burnable waste.

Source:

Mimaki Europe B.V.

(c) Baldwin Technology Company Inc.
05.05.2023

Baldwin presents range of technologies at Graphics Canada

Baldwin Technology Company Inc. will introduce its range of technologies at Graphics Canada, which will take place at the Toronto International Centre, May 11-13.
 
Solutions to be discussed at Graphics Canada will include corona surface treatment systems, automated cylinder cleaning systems, LED-UV curing, roto-spray systems, and technologies for color management and defect detection.
 
Baldwin’s AMS Spectral UV-brand LED UV technology offers a high curing intensities available for printing. Benefits of LED UV include a 65% reduction in energy consumption, reduced costs related to parts and service, increased productivity and greater effeciency stemming from the lack of waiting for lamps to warm up or cool down
 
In addition, Baldwin is a leading provider of corona surface treatment systems that are used to achieve better adhesion of process liquids like inks and coatings to substrates as part of printing and industrial production processes
 

Baldwin Technology Company Inc. will introduce its range of technologies at Graphics Canada, which will take place at the Toronto International Centre, May 11-13.
 
Solutions to be discussed at Graphics Canada will include corona surface treatment systems, automated cylinder cleaning systems, LED-UV curing, roto-spray systems, and technologies for color management and defect detection.
 
Baldwin’s AMS Spectral UV-brand LED UV technology offers a high curing intensities available for printing. Benefits of LED UV include a 65% reduction in energy consumption, reduced costs related to parts and service, increased productivity and greater effeciency stemming from the lack of waiting for lamps to warm up or cool down
 
In addition, Baldwin is a leading provider of corona surface treatment systems that are used to achieve better adhesion of process liquids like inks and coatings to substrates as part of printing and industrial production processes
 
Rounding out its technology, Baldwin’s cleaning solutions automatically and safely clean cylinders, blankets and plates used in various production processes, and tackle cleaning tasks like hickey-picking, end-of-run plate cleaning, blanket cleaning and film cylinder cleaning.
 
Common to all the technologies is that they increase productivity, reduce waste, improve working conditions and provide full control of producing flawless products. With easy automation and compatible software, Baldwin’s technologies are seamlessly integrated with one another.

Source:

Baldwin Technology Company Inc.

Photo PCMC
02.04.2023

PCMC names Windell McGill as Product Launch Manager

Paper Converting Machine Company (PCMC)—which specializes in the design and manufacture of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries worldwide—announced that Windell McGill has joined the organization as the Product Launch Manager for its print business segment.

Bringing more than 25 years of print industry experience to PCMC, McGill will oversee product management, product launch and brand expansion for all PCMC print products and services.

Prior to joining PCMC, McGill was Managing Partner of ePac Atlanta, a provider of custom, high-quality flexible packaging solutions and digital printing services. Before that, he served as Business Segment Manager for flexible packaging at HP Indigo. McGill’s extensive experience also includes more than 15 years with Advanced Vision Technology, a provider of camera-based inspection equipment for the packaging market, where he held a variety of sales roles before being named President-Americas.

McGill will operate from his office in Atlanta.

Paper Converting Machine Company (PCMC)—which specializes in the design and manufacture of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries worldwide—announced that Windell McGill has joined the organization as the Product Launch Manager for its print business segment.

Bringing more than 25 years of print industry experience to PCMC, McGill will oversee product management, product launch and brand expansion for all PCMC print products and services.

Prior to joining PCMC, McGill was Managing Partner of ePac Atlanta, a provider of custom, high-quality flexible packaging solutions and digital printing services. Before that, he served as Business Segment Manager for flexible packaging at HP Indigo. McGill’s extensive experience also includes more than 15 years with Advanced Vision Technology, a provider of camera-based inspection equipment for the packaging market, where he held a variety of sales roles before being named President-Americas.

McGill will operate from his office in Atlanta.

Source:

PAPER CONVERTING MACHINE COMPANY (PCMC)

03.02.2023

Fiery® announces Independence

Fiery®, which provides Digital Front End (DFE) technology for production and industrial printing, announced that it has been separated from Electronics For Imaging, Inc. (“EFI”) and established as a separate company that will operate independently while remaining owned by EFI’s owner, Siris Capital Group LLC (together with its affiliates, "Siris").

Toby Weiss, long-time Chief Operating Officer and General Manager of Fiery, will continue to lead the business as CEO of Fiery, with Jeff Jacobson serving as Executive Chairman of Fiery in addition to his role as Executive Chairman of EFI.

“Fiery solutions have always been about enabling digital print and making print engines better, and this is a milestone in furthering that mission,” said Mr. Weiss. “Fiery OEM partners will benefit knowing that they are working with a company that is completely focused on adding value to their print platforms with world-class color management, high-performance image processing, and automated workflows.

Fiery®, which provides Digital Front End (DFE) technology for production and industrial printing, announced that it has been separated from Electronics For Imaging, Inc. (“EFI”) and established as a separate company that will operate independently while remaining owned by EFI’s owner, Siris Capital Group LLC (together with its affiliates, "Siris").

Toby Weiss, long-time Chief Operating Officer and General Manager of Fiery, will continue to lead the business as CEO of Fiery, with Jeff Jacobson serving as Executive Chairman of Fiery in addition to his role as Executive Chairman of EFI.

“Fiery solutions have always been about enabling digital print and making print engines better, and this is a milestone in furthering that mission,” said Mr. Weiss. “Fiery OEM partners will benefit knowing that they are working with a company that is completely focused on adding value to their print platforms with world-class color management, high-performance image processing, and automated workflows.

“Fiery will remain focused on working closely with its OEM partners, including the EFI Inkjet business, to continue developing cutting-edge technology that drives the next generation of automation, accuracy, and profit potential in digital printing,” Mr. Weiss continued. “Fiery now has a greater ability to serve as a neutral partner to ensure OEMs capture success within digital print. We look forward to accelerating our investment as a standalone company, while driving our expanding product portfolio, incorporating world-class color algorithms, and developing advanced cloud technology.”

Source:

EFI

19.01.2023

Alliance of the Willing at Berlin Fashion Week: VORN, Zalando, Unity and Kornit Digital

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Kornit Digital LTD. (NASDAQ: KRNT) ("Kornit" or the "Company"), a market leader in sustainable, on-demand digital fashion and textile production technologies, announced its partnership with VORN – The Berlin Fashion Hub, Zalando, and Unity – creating an "alliance of the willing" to transform the industry via "phygital" fashion with a circular approach.

Nine designers were challenged to create fashion capsules in eight weeks utilizing the latest technology innovations from the three alliance partners – combining digital product creation, web3-based design, digital printing, immersive circular design, 3D rendering and avatar development. All collections are on display exclusively at Berlin Fashion Week from Wednesday, January 18 to Friday, January 20 at Bikini Berlin.
 
The challenge follows standing room only Kornit Fashion Week events across the globe, displaying how on-demand, digital production creates a fashion world of nearly endless creativity. Hosted at the Impact Hub Berlin, the VORN Academy Program offered creators access to a holistic technology toolset - including the advanced Kornit Presto MAX single-step solution for direct-to-fabric sustainable printing. Some of the prominent designers taking part include costume and fashion designer Alexis Mersmann, Judith Bondy, AR and NFT artist Ann-Britt Dittmar, Berlin-based director Tanja Bombach, Nina Jurcic, Olga Boncheva, digital artist, and fashion designer Schirin Negahbani, Johann Erhardt, and Israeli designer Idan Yoav.
 
"This collaboration across four industry leaders is so unique because the result is a sum so much greater than each of its individual parts. It's a true 'alliance of the willing' that opens doors to 'phygital' collections built at the intersection of digital fashion, 3D design, and on-demand production," said Omer Kulka, Chief Innovation Officer at Kornit Digital. "We're honored to team with VORN – The Berlin Fashion Hub, Zalando, and Unity during Berlin Fashion Week to demonstrate what's possible as the physical and virtual fashion worlds come together."
 
"When we launched the Berlin Fashion Hub, our intent was to create a B2B environment to spark unmatched fashion and sustainability innovations. As Berlin is one of the world's most important fashion and textile centers, there is no better place to demonstrate economically succesful circularity in the fashion industry," said Professor Marte Hentschel, Co-Founder at VORN – The Berlin Fashion Hub. "Together, we're changing fashion to drive sustainability and harness the creative power of both the physical and virtual. We're proud of what's been accomplished in conjunction with an incredible group of designers, creators, and partners."

Source:

Kornit

(c) EFI
31.10.2022

EFI sells 300th VUTEk FabriVU Printer

Orbus Exhibit & Display Group® has continued its substantial and longstanding relationship with digital print technology provider Electronics For Imaging, Inc., choosing the premium-quality capabilities of the EFI™ VUTEk® FabriVU® 340+ soft signage printer to meet surging demand for dye-sublimation soft signage graphics. The new printer now running at Orbus’s Las Vegas facility marks an important milestone for EFI, as it is the 300th EFI VUTEk FabriVU printer installed worldwide.

Orbus is North America’s top trade manufacturer of soft signage and flag graphics for tradeshow exhibits, promotional displays, experiential retail and corporate interiors. The company is one of the largest users of EFI soft signage printers worldwide. The newly installed FabriVU 340+ model joins two additional FabriVU printers at Orbus Las Vegas. The company has its fourth FabriVU printer at its headquarters facility, along with a pair of high-volume EFI industrial printers used exclusively for dye-sublimation production.

Orbus Exhibit & Display Group® has continued its substantial and longstanding relationship with digital print technology provider Electronics For Imaging, Inc., choosing the premium-quality capabilities of the EFI™ VUTEk® FabriVU® 340+ soft signage printer to meet surging demand for dye-sublimation soft signage graphics. The new printer now running at Orbus’s Las Vegas facility marks an important milestone for EFI, as it is the 300th EFI VUTEk FabriVU printer installed worldwide.

Orbus is North America’s top trade manufacturer of soft signage and flag graphics for tradeshow exhibits, promotional displays, experiential retail and corporate interiors. The company is one of the largest users of EFI soft signage printers worldwide. The newly installed FabriVU 340+ model joins two additional FabriVU printers at Orbus Las Vegas. The company has its fourth FabriVU printer at its headquarters facility, along with a pair of high-volume EFI industrial printers used exclusively for dye-sublimation production.

The upgraded performance comes courtesy of the VUTEk FabriVU 340+ printer’s new, eight-printhead, CMYK x 2 array, along with new electronics for reliable and consistent premium-quality output of exhibit graphics, backlit graphics, retail fixture wraps, front lit graphics, block-out banners and fabric interior decor. A flag printing kit on the printer easily handles porous media in high-penetration applications by collecting inks without touching the rear side of the media.
 
As with all VUTEk FabriVU printers, it prints both transfer paper and direct-to-fabric.

Source:

EFI

(c) CSR Europe
07.10.2022

Epson at EUROPEAN SDG ROUNDTABLE about Sustainable Fashion

The fashion industry currently produces 20% of global wastewater and 10% of global carbon emissions. Improvements can be made for example localizing fashion, using more on-demand digital printing (it can save up to 4kg of CO2 per item) and digital textile printers (they reduce water use by up to 90% and energy use by up to 30%). Increasing the use of sustainable materials is vital and extending the lifecycle of use would make a serious difference.

Together with designers, producers, retailers, and customers, Paolo Crespi, Sales & Marketing Director Printing Technologies at Epson, will discuss how each stage of the fashion production can be made more sustainable, and how circularity and longevity can be build into the lifecycle of fashion.

The panel will take place on Tuesday, 11 October 2022 at 09:30-11:00 am CET.

Click here for more information.

The fashion industry currently produces 20% of global wastewater and 10% of global carbon emissions. Improvements can be made for example localizing fashion, using more on-demand digital printing (it can save up to 4kg of CO2 per item) and digital textile printers (they reduce water use by up to 90% and energy use by up to 30%). Increasing the use of sustainable materials is vital and extending the lifecycle of use would make a serious difference.

Together with designers, producers, retailers, and customers, Paolo Crespi, Sales & Marketing Director Printing Technologies at Epson, will discuss how each stage of the fashion production can be made more sustainable, and how circularity and longevity can be build into the lifecycle of fashion.

The panel will take place on Tuesday, 11 October 2022 at 09:30-11:00 am CET.

Click here for more information.

Source:

Epson and CSR Europe

(c) Mimaki Europe B.V.
07.10.2022

Mimaki announces Third Virtual Global Innovation Days Event

Mimaki announce their third Global Innovation Days (19th – 21st October 2022). This collaborative virtual experience unites Mimaki’s regional offices to discuss trends across the different markets and the American, Asian, and European regions operated in by Mimaki, through a series of live and pre-recorded demonstrations, webinars, and round-table discussions. The programme of events will be led by experts from Mimaki Europe, Japan, USA and Australia.

With a focus on addressing the queries and requirements across the many facets of the print industry, the event will see collaborations with the likes of FESPA, from whom spokespeople will be attending to discuss the latest trends and innovations identified at FESPA this year, as well as a look ahead to next year’s event and what people can expect to see.

Mimaki announce their third Global Innovation Days (19th – 21st October 2022). This collaborative virtual experience unites Mimaki’s regional offices to discuss trends across the different markets and the American, Asian, and European regions operated in by Mimaki, through a series of live and pre-recorded demonstrations, webinars, and round-table discussions. The programme of events will be led by experts from Mimaki Europe, Japan, USA and Australia.

With a focus on addressing the queries and requirements across the many facets of the print industry, the event will see collaborations with the likes of FESPA, from whom spokespeople will be attending to discuss the latest trends and innovations identified at FESPA this year, as well as a look ahead to next year’s event and what people can expect to see.

Attendees will also have the opportunity to further explore the latest additions to Mimaki’s product portfolio, with demonstrations of the technologies and the applications that they are able to create coming live from the Mimaki showroom in Amsterdam. The 330 series, including the JV330-160, CJV330-160 and TS330-1600, will be showcased, as well as the full-colour capabilities of the 3DUJ-2207 3D printer, and Mimaki’s latest flatbed printer, the JFX600-2513, which boasts speeds thrice superior to that of its predecessor. Another highlight of the event will be a discussion held with leading print media and software vendors, to examine the current market trends from outside of the manufacturing perspective.

Source:

Mimaki Europe B.V.

(c) Eli Magaziner
22.09.2022

Kornit Digital, Cozmo and Raw-Edges present sofa with custom designs

Kornit Digital is collaborating with furniture start-up Cozmo and London design studio Raw-Edges to showcase the unlimited creativity made possible by digitally produced custom sofa jacket designs at the London Design Festival, September 17th -25th. Dubbed “Cheek Prints,” the collection was created sustainably, quickly, and on-demand with Kornit’s digital fashion and textile production solutions. Each unique cover features visually designs intended to transform plain, standard sofas into custom creations with an entirely fresh look and feel. The collection was designed by Raw-Edges at their London design studio.

Kornit Digital is collaborating with furniture start-up Cozmo and London design studio Raw-Edges to showcase the unlimited creativity made possible by digitally produced custom sofa jacket designs at the London Design Festival, September 17th -25th. Dubbed “Cheek Prints,” the collection was created sustainably, quickly, and on-demand with Kornit’s digital fashion and textile production solutions. Each unique cover features visually designs intended to transform plain, standard sofas into custom creations with an entirely fresh look and feel. The collection was designed by Raw-Edges at their London design studio.

The sofa collection was produced using Kornit’s Presto direct-to-fabric digital production system. With the on-demand technology, designers can easily and rapidly embrace new possibilities to transform mere concepts into custom fabrics. Digital production removes typical limitations of one fabric, one design at a time – whether it’s a single sofa or many sofas – and at the same cost. For industries ranging from fashion and home décor to other advanced textile applications, the Kornit solution consistently unlocks unlimited creativity – producing garments and fabrics with a high quality and a soft feel.

Source:

Kornit / Pr4u

(c) Mimaki
Talha Güldeste, Founder of Makroser Tekstil, in front of the Mimaki TS300P-1800.
08.09.2022

Makroser Tekstil uses Mimaki TS300P-1800 for carpet production

Turkish company, Makroser Tekstil specialises in manufacturing digitally printed carpets and over the years has become one of the leading suppliers in the sector. Utilising Mimaki’s high-performance TS300P-1800 sublimation transfer printer since 2020, the company has optimised their production potential to meet increasing customer expectations in this growing digital textile carpet market.

Alongside carpets, the company also offers other solutions to the carpet industry by producing backing and other materials

Turkish company, Makroser Tekstil specialises in manufacturing digitally printed carpets and over the years has become one of the leading suppliers in the sector. Utilising Mimaki’s high-performance TS300P-1800 sublimation transfer printer since 2020, the company has optimised their production potential to meet increasing customer expectations in this growing digital textile carpet market.

Alongside carpets, the company also offers other solutions to the carpet industry by producing backing and other materials

Acting as both a seller and a supplier, Makroser Tekstil has an approximate monthly output of 150,000 square meters of final product and sells about 70-80,000 square meters of intermediate goods per month. “Our market has four main pillars, including chain market groups, export, e-commerce and our own retail network. We have gained serious momentum in the sales of our final products in recent years, and we attach great importance to our sales and marketing processes, in addition to production, so to increase our profitability. We are currently exporting 35-40% of our production, and our branding and e-commerce activities show that we are making significant improvements”, says Makroser Tekstil’s co-founder, Talha Güldest.

Makroser Tekstil decided to invest in a Mimaki TS300P-1800 sublimation transfer printer back in August 2020, with the aim to strengthen their position in the digitally printed carpet market. “The investment in the TS300P-1800 has enabled us to have the capacity to respond quickly to e-commerce orders,” Güldeste commented. “Product quality is the main criterion in the supplies we provide to both online and retail outlets. We made this investment because we saw that we would increase our quality and customer satisfaction in the carpets we print. The Mimaki printer met our expectations, providing the results we wanted from the very first print after installation.” Considering the increased demand, Güldeste aims to further boost their printing capacity with investment in several more Mimaki printers.

Source:

Mimaki Europe B.V.

08.09.2022

Monforts at ITMA ASIA + CITME

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

“Many more applications are possible, such as the overdyeing of denim, the creation of double-face coated materials, fabrics awnings, tents and medical drapes and the pre-treatment of substrates for digital printing”, explains Gunnar Meyer, Monforts area sales manager for China. “A range of different doctor blades and their combinations can be supplied to meet individual requirements, including air knife, roller knife, foam, screen and magnetic roller coating. The latter option is recommended for lines with working widths of over 2.4 metres.”

In addition, Monforts can provide the necessary explosion-proof ranges for solvent-based coatings and high temperature processes up to 320°C, such as the PTFE coating of nonwoven filter material. These lines are equipped with special burners, stenter chains, and insulation.

Source:

 A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

(c) EFI
19.07.2022

EFI™ Reggiani: New textile campus to accommodate ongoing growth

EFI™ Reggiani, the industrial textile printing business of printing technology company Electronics For Imaging, Inc. (EFI), has broken ground on a new textile campus to accommodate ongoing growth. The new 20,000-square-metre campus in Comun Nuovo, Bergamo, Italy, is expected to be completed midyear in 2023.

EFI™ Reggiani, the industrial textile printing business of printing technology company Electronics For Imaging, Inc. (EFI), has broken ground on a new textile campus to accommodate ongoing growth. The new 20,000-square-metre campus in Comun Nuovo, Bergamo, Italy, is expected to be completed midyear in 2023.

Sustainability and employee well-being at the centre
The new facility was designed with environmental sustainability and employee well-being in mind. That focus includes plans to install 400 kilowatts of solar panels supplying 60% of the facility’s total energy requirements. Moreover, the building will benefit from superior thermal insulation that will ensure a reduction in heating and cooling costs. Numerous skylights in the facility will provide better natural lighting and a reduction in artificial lighting usage.
 
Green space on the campus was a priority in the design process, covering an estimated 20% of the total area. For a more welcoming work environment, the campus will also feature a canteen and gymnasium for employee use.
 
A 3,000-square-metre demo centre in the new facility will be nearly twice as large as the current EFI Reggiani demo centre in Grassobbio, Italy, offering a high-end, high-tech showcase for state-of-the-art EFI Reggiani printers, as well as Mezzera pre- and post-treatment and Jaeggli yarn treatment products. The demo centre will also feature EFI Reggiani’s recently acquired portfolio of Inèdit raster image processing (RIP) and workflow software solutions.
 
Transforming the textile industry through innovation in green
Since the launch of its first analogue printer, to its newest digital solutions, EFI Reggiani has at its core a heritage and expertise that have contributed to the transformation of the textile industry worldwide. With its total commitment to providing “Innovation in Green,” EFI Reggiani’s leadership is the result of extensive research targeted at improving productivity, quality and sustainability in its customers’ operations. The company is focused on optimising the textile manufacturing process – and reducing energy use, water consumption and overall environmental impact – to ensure customers’ business growth and profitability.
 
Over the years, EFI Reggiani’s product portfolio has continued to expand, ranging from rotary and flatbed printing machines, to scanning/multi-pass digital printers, to fast digital textile printers.

Source:

EFI