From the Sector

Reset
25 results
Lenzing: Sustainable geotextiles as glacier protection and jacket (c) UN Nations
22.03.2024

Lenzing: Sustainable geotextiles as glacier protection and jacket

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The Lenzing Group has created an innovative concept that contributes to the sustainable protection of our glaciers while inspiring collective action for sustainable practices and a circular economy in the nonwovens and textile value chain. The concept, which was artistically staged by the Italian artist Michelangelo Pistoletto, was presented on March 21, 2024, as part of the International Day of Forests celebrations at the Palais des Nations, the headquarters of the United Nations Office at Geneva (UNOG).

The melting of glaciers is being severely impacted by global warming. Geotextiles are used to protect ice and snow. However, the nonwovens used for this are made of fossil-based fibers, which allow microplastics1 to enter the valley via streams and may enter the food chain through small organisms and animals. Nonwovens made from cellulosic LENZING™ fibers, which are biodegradable at the end of their life cycle and can be completely recycled, are the sustainable solution to this problem.

The covering of a small area with the new material made from LENZING™ fibers was tested for the first time during a field test on the Stubai Glacier. Four meters of ice were saved from melting. This was confirmed in a study conducted by the University of Innsbruck and the Austrian glacier lift operators on the Stubai Glacier in Tyrol (Austria). In 2023, the pilot project was successfully extended to all Austrian glaciers used by tourists.

Last year, the project was also awarded first place in the prestigious Swiss BIO TOP Awards for wood and material innovations.

Lenzing takes this innovation project as an opportunity to inspire collaborative action towards sustainable practices and circularity in the textile value chain. Together with a network of innovative partners, Lenzing is working on processing geotextiles into new textile fibers giving them a second life as a garment. The use of geotextiles is usually limited to two years, after which the nonwovens would be disposed of. In the first phase of the pilot project, the recycling of nonwovens made for geotextiles use has been successfully tested and a fashionable “Glacier Jacket” has been produced, showcasing that the recycling of geotextiles is viable. Next to Lenzing, the network includes Marchi & Fildi Spa, a specialist in the field of mechanical recycling, the denim fabric manufacturer Candiani Denim and the fashion studio Blue of a Kind.

nominees Graphic: nova Institut
19.01.2024

Nominated Innovations for Cellulose Fibre Innovation of the Year 2024 Award

From Resource-efficient and Recycled Fibres for Textiles and Building Panels to Geotextiles for Glacier Protection: Six award nominees present innovative and sustainable solutions for various industries in the cellulose fibre value chain. The full economic potential of the cellulose fibre industry will be introduced to a wide audience that will vote for the winners in Cologne (Germany), and online.

Again nova-Institute grants the “Cellulose Fibre Innovation of the Year” award in the context of the “Cellulose Fibres Conference”, that will take place in Cologne on 13 and 14 March 2024. In advance, the conferences advisory board nominated six remarkable products, including cellulose fibres from textile waste and straw, a novel technology for dying cellulose-based textiles and a construction panel as well as geotextiles. The innovations will be presented by the companies on the first day of the event. All conference participants can vote for one of the six nominees and the top three winners will be honoured with the “Cellulose Fibre Innovation of the Year” award. The Innovation award is sponsored by GIG Karasek (AT).

From Resource-efficient and Recycled Fibres for Textiles and Building Panels to Geotextiles for Glacier Protection: Six award nominees present innovative and sustainable solutions for various industries in the cellulose fibre value chain. The full economic potential of the cellulose fibre industry will be introduced to a wide audience that will vote for the winners in Cologne (Germany), and online.

Again nova-Institute grants the “Cellulose Fibre Innovation of the Year” award in the context of the “Cellulose Fibres Conference”, that will take place in Cologne on 13 and 14 March 2024. In advance, the conferences advisory board nominated six remarkable products, including cellulose fibres from textile waste and straw, a novel technology for dying cellulose-based textiles and a construction panel as well as geotextiles. The innovations will be presented by the companies on the first day of the event. All conference participants can vote for one of the six nominees and the top three winners will be honoured with the “Cellulose Fibre Innovation of the Year” award. The Innovation award is sponsored by GIG Karasek (AT).

In addition, the ever-growing sectors of cellulose-based nonwovens, packaging and hygiene products offer conference participants insights beyond the horizon of traditional textile applications. Sustainability and other topics such as fibre-to-fibre recycling and alternative fibre sources are the key topics of the Cellulose Fibres Conference, held in Cologne, Germany, on 13 and 14 March 2024 and online. The conference will showcase the most successful cellulose-based solutions currently on the market or those planned for the near future.

The nominees:

The Straw Flexi-Dress: Design Meets Sustainability – DITF & VRETENA (DE)
The Flexi-Dress design was inspired by the natural golden colour and silky touch of HighPerCell® (HPC) filaments based on unbleached straw pulp. These cellulose filaments are produced using environmentally friendly spinning technology in a closed-loop production process. The design decisions focused on the emotional connection and attachment to the HPC material to create a local and circular fashion product. The Flexi-Dress is designed as a versatile knitted garment – from work to street – that can be worn as a dress, but can also be split into two pieces – used separately as a top and a straight skirt. The top can also be worn with the V-neck front or back. The HPC textile knit structure was considered important for comfort and emotional properties.

HONEXT® Board FR-B (B-s1, d0) – Flame-retardant Board made From Upcycled Fibre Waste From the Paper Industry – Honext Material (ES)
HONEXT® FR-B board (B-s1, d0) is a flame-retardant board made from 100 % upcycled industrial waste fibres from the paper industry. Thanks to innovations in biotechnology, paper sludge is upcycled – the previously “worthless” residue from paper making – to create a fully recyclable material, all without the use of resins. This lightweight and easy-to-handle board boasts high mechanical performance and stability, along with low thermal conductivity, making it perfect for various applications in all interior environments where fire safety is a priority. The material is non-toxic, with no added VOCs, ensuring safety for both people and the planet. A sustainable and healthy material for the built environment, it achieves Cradle-to-Cradle Certified GOLD, and Material Health CertificateTM Gold Level version 4.0 with a carbon-negative footprint. Additionally, it is verified in the Product Environmental Footprint.

LENZING™ Cellulosic Fibres for Glacier Protection – Lenzing (AT)
Glaciers are now facing an unprecedented threat from global warming. Synthetic fibre-based geotextiles, while effective in slowing down glacier melt, create a new environmental challenge: microplastics contaminating glacial environments. The use of such materials contradicts the very purpose of glacier protection, as it exacerbates an already critical environmental problem. Recognizing this problem, the innovative use of cellulosic LENZING™ fibres presents a pioneering solution. The Institute of Ecology, at the University of Innsbruck, together with Lenzing and other partners made first trials in 2022 by covering small test fields with LENZING™ fibre-based geotextiles. The results were promising, confirming the effectiveness of this approach in slowing glacier melt without leaving behind microplastic.

The RENU Jacket – Advanced Recycling for Cellulosic Textiles – Pangaia (UK) & Evrnu (US)
PANGAIA LAB was born out of a dream to reduce barriers between people and the breakthrough innovations in material science. In 2023, PANGAIA LAB launched the RENU Jacket, a limited edition product made from 100% Nucycl® – a technology that recycles cellulosic textiles by breaking them down to their molecular building blocks, and reforming them into new fibres. This process produces a result that is 100% recycled and 100% recyclable when returned to the correct waste stream – maintaining the strength of the fibre so it doesn’t need to be blended with virgin material.
Through collaboration with Evrnu, the PANGAIA team created the world’s first 100% chemically recycled denim jacket, replacing a material traditionally made from 100% virgin cotton. By incorporating Nucycl® into this iconic fabric construction, dyed with natural indigo, the teams have demonstrated that it’s possible to replace ubiquitous materials with this innovation.

Textiles Made from Easy-to-dye Biocelsol – VTT Technical Research Centre of Finland (FI)
One third of the textile industry’s wastewater is generated in dyeing and one fifth in finishing. But the use of chemically modified Biocelsol fibres reduces waste water. The knitted fabric is made from viscose and Biocelsol fibres and is only dyed after knitting. This gives the Biocelsol fibres a darker shade, using the same amount of dye and no salt in dyeing process. In addition, an interesting visual effect can be achieved. Moreover, less dye is needed for the darker colour tone in the finished textile and the possibility to use the salt-free dyeing is more environmentally friendly.
These special properties of man-made cellulosic fibres will reassert the fibres as a replacement for the existing fossil-based fibres, thus filling the demand for more environmentally friendly dyeing-solutions in the textile industry. The functionalised Biocelsol fibres were made in Finnish Academy FinnCERES project and are produced by wet spinning technique from the cellulose dope containing low amounts of 3-allyloxy-2-hydroxypropyl substituents. The functionality formed is permanent and has been shown to significantly improve the dyeability of the fibres. In addition, the functionalisation of Biocelsol fibres reduces the cost of textile finishing and dyeing as well as the effluent load.

A New Generation of Bio-based and Resource-efficient Fibre – TreeToTextile (SE)
TreeToTextile has developed a unique, sustainable and resource efficient fibre that doesn't exist on the market today. It has a natural dry feel similar to cotton and a semi-dull sheen and high drape like viscose. It is based on cellulose and has the potential to complement or replace cotton, viscose and polyester as a single fibre or in blends, depending on the application.
TreeToTextile Technology™ has a low demand for chemicals, energy and water. According to a third party verified LCA, the TreeToTextile fibre has a climate impact of 0.6 kg CO2 eq/kilo fibre. The fibre is made from bio-based and traceable resources and is biodegradable.

More information:
Nova Institut nova Institute
Source:

nova Institut

Award winners with foundation chairman, foundation MD and professors (c) VDMA e.V. Textile Machinery
Award winners with foundation chairman, foundation MD and professors
08.12.2023

Walter Reiners Foundation honours young engineers

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

As part of the Aachen-Dresden-Denkendorf International Textile Conference in Dresden, the Chairman of the Walter Reiners Foundation of the VDMA, Peter D. Dornier, presented awards to four successful young engineers. Two promotion prizes and two sustainability prizes were awarded in the Bachelor and Diploma/Master categories. Academic works in which solutions for resource-saving products and technologies are developed are eligible for the sustainability prizes.

A sustainability prize worth 3,000 euros in the Bachelor's category was awarded to Franziska Jauch, Niederrhein University of Applied Sciences, for her Bachelor's thesis on pigment digital printing in denim production.

The promotion prize in the Bachelor's category, also worth 3,000 euros, went to Annika Datko, RWTH Aachen, for her work on determining the polyester content in used textiles.

Dave Kersevan, TU Dresden, was honoured with a sustainability prize in the Diploma/Master's category, endowed with 3,500 euros. The subject of his thesis was the development of a laboratory system for the production of needled carbon preforms.

This year's promotion award in the Diploma/Master's category, endowed with prize money of 3,500 euros, went to Flávio Diniz from RWTH Aachen. The subject of his Master's thesis was the feasibility of manufacturing ultra-thin carbon fibres.

The award ceremony 2024 will take place in April at the VDMA stand at the Techtextil fair in Frankfurt.

08.09.2022

Monforts at ITMA ASIA + CITME

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

Monforts will highlight its technologies for special technical textile applications at this year’s ITMA ASIA + CITME which takes place at the National Exhibition and Convention Center in Shanghai, China, from November 20-24.

One of Monforts' developments is the Montex 8500 XXL stenter system for the production of technical fabrics in widths of up to 6.8 metres. Among the products made on this system are treated nonwovens for the geotextiles and filter media markets, tarpaulins, advertising banners, black-out curtains, membranes and many more.

On Montex©Coat coating lines, meanwhile, the possibilities range from the single-sided application of finishing agents for outdoor clothing and adding functionality to home textiles, to the creation of materials for sophisticated lightweight construction and automotive and aerospace components.

“Many more applications are possible, such as the overdyeing of denim, the creation of double-face coated materials, fabrics awnings, tents and medical drapes and the pre-treatment of substrates for digital printing”, explains Gunnar Meyer, Monforts area sales manager for China. “A range of different doctor blades and their combinations can be supplied to meet individual requirements, including air knife, roller knife, foam, screen and magnetic roller coating. The latter option is recommended for lines with working widths of over 2.4 metres.”

In addition, Monforts can provide the necessary explosion-proof ranges for solvent-based coatings and high temperature processes up to 320°C, such as the PTFE coating of nonwoven filter material. These lines are equipped with special burners, stenter chains, and insulation.

Source:

 A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

05.07.2022

ITM 2022: Bringing Textile Technology Leaders together

ITM 2022 hosted textile technology leaders in Istanbul for 5 days, presenting the latest innovations in every field of textile from weaving, knitting, yarn, digital printing, finishing to denim. The ITM 2022 Exhibition, where a business volume of over 1.5 billion Euros was created in 5 days, accelerated the Turkish and world economy.

Organized by the partnership of Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., ITM 2022- International Textile Machinery Exhibition was held at Tüyap Fair and Congress Center between 14-18 June.  ITM 2022 Exhibition, attended by 1280 companies and company representatives from 65 countries, was visited by 64,500 people from 102 countries, consisting of 44% international and 56% domestic visitors.

ITM 2022 hosted textile technology leaders in Istanbul for 5 days, presenting the latest innovations in every field of textile from weaving, knitting, yarn, digital printing, finishing to denim. The ITM 2022 Exhibition, where a business volume of over 1.5 billion Euros was created in 5 days, accelerated the Turkish and world economy.

Organized by the partnership of Teknik Fairs Inc. and Tüyap Tüm Fuarcılık Yapım Inc., ITM 2022- International Textile Machinery Exhibition was held at Tüyap Fair and Congress Center between 14-18 June.  ITM 2022 Exhibition, attended by 1280 companies and company representatives from 65 countries, was visited by 64,500 people from 102 countries, consisting of 44% international and 56% domestic visitors.

Turkey became a Supply Center at the ITM 2022 Exhibition
The successful sales graph achieved at the ITM 2022 Exhibition proved that the difficulties experienced due to the pandemic for the last 3 years have been left behind. Turkey has become a supply center for European, Middle Eastern and African countries, especially with the disruption of the supply chain in Far East countries, including China. The profile of the professional visitors visiting the ITM 2022 Exhibition revealed that in the new world order that has shifted after the pandemic, the trade network has also changed hands and new players have appeared on the scene. The fact that manufacturers from all over the world such as Andorra, Angola, Honduras, Peru, Seychelles, Sierra Leone, Brazil, Sri Lanka, Tanzania, Egypt, Iran, and Oman purchased a large number of machinery and signed collaborations at the ITM 2022 Exhibition has proven this.

Exhibitors of ITM 2022 enlarge their stands for ITM 2024
Many company officials, who stated that they have achieved a sales graphic far above their expectations starting from the very first day of the ITM 2022 Exhibition and that they have hosted visitors from all over the world, decided to enlarge their stands at the ITM 2024 Exhibition. During the exhibition, companies visited the registration application points and applied for ITM 2024 participation.

The next meeting of the ITM and HIGHTEX Exhibitions will be held in Istanbul between 4-8 June 2024.

Source:

ITM / Teknik Fairs INC.

(c) Tonello
26.10.2021

Tonello presents O-Zone, a new dimension of garment finishing

Tonello presents O-Zone, a new garment finishing project developed with Candiani Denim, a leading brand in the denim industry.

O-Zone, just presented at Kingpins 24, represents a new leap in quality and an important step in the growth of Tonello'a range of ozone processes, which are born from direct experience, research and a deeper knowledge of technology.

First with ECOfree2, then with SaniCare and OBleach, now with O-Zone, Tonello are defining ozone finishing and taking it to its maximum expression in every field of application: creation of special effects, garment sanitization, cleaning and reduction of water consumption, etc.

What is O-Zone?
At first glance it is similar to a cabinet. A special cabinet, however, inside which the garments are placed and treated, through an innovative, sustainable, responsible process.

A process that is also flexible, fast, safe and fully controllable by a touch screen that allows you to easily set all the desired parameters to obtain unique and customizable aesthetics, such as localized discoloration and lightening, sun-faded looks and degradé effects.

Tonello presents O-Zone, a new garment finishing project developed with Candiani Denim, a leading brand in the denim industry.

O-Zone, just presented at Kingpins 24, represents a new leap in quality and an important step in the growth of Tonello'a range of ozone processes, which are born from direct experience, research and a deeper knowledge of technology.

First with ECOfree2, then with SaniCare and OBleach, now with O-Zone, Tonello are defining ozone finishing and taking it to its maximum expression in every field of application: creation of special effects, garment sanitization, cleaning and reduction of water consumption, etc.

What is O-Zone?
At first glance it is similar to a cabinet. A special cabinet, however, inside which the garments are placed and treated, through an innovative, sustainable, responsible process.

A process that is also flexible, fast, safe and fully controllable by a touch screen that allows you to easily set all the desired parameters to obtain unique and customizable aesthetics, such as localized discoloration and lightening, sun-faded looks and degradé effects.

O-Zone is designed for small productions and is ideal for doing experiments and research directly on the garment, quickly verifying the result.

Source:

Tonello / Effe-Bi Srl

23.09.2021

NCTO: U.S. Trade Representative Katherine Tai highlights U.S. Textile Industry

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

Milliken & Company and American & Efird (A&E) hosted United States Trade Representative (USTR) Ambassador Katherine Tai in two separate visits to the companies’ state-of-the-art textile manufacturing facilities, marking an unprecedented visit to the heart of the U.S. textile industry in the Carolinas by the nation’s top trade chief.

Ambassador Tai’s visit comes at a pivotal time for the U.S. textile supply chain, which produced $64 billion in output in 2020 and employed nearly 530,000 workers. The industry has been at the forefront of a domestic production chain manufacturing over a billion personal protective equipment (PPE) items during the COVID-19 pandemic.

The Ambassador’s visit to Milliken included a tour of the company’s Magnolia plant in Blacksburg, S.C., and a roundtable discussion highlighting the important role women contribute to textiles, the critical need for policies supporting a domestic supply chain, and the significant impact of the sector to the U.S. economy. Milliken is one of the largest textile companies in the U.S., employing more than 6,000 associates domestically and an additional 1,350 associates globally. Milliken’s Textile Business alone employs 2,500 people across eight counties in South Carolina and is the fourth largest manufacturing employer in the Upstate.

On the second leg of her trip, Ambassador Tai visited American & Efird’s manufacturing facility in Mount Holly, N.C. American & Efird operates as part of Elevate Textiles and its global portfolio of advanced products and distinguished textile brands, including A&E, Burlington, Cone Denim, Gütermann and Safety Components, and representing more than 500 years of textile manufacturing knowledge.

During the visit, U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industry participated in a roundtable with the Ambassador at which they discussed the competitiveness of the domestic industry, outlined priority issues in Washington, such as the importance of the Western Hemisphere co-production chain and ways to jointly support domestic supply chains through Buy American and Berry Amendment policies that help onshore production, spur investment, maintain the safety and security of our armed forces and generate new jobs.

19.07.2021

ISKO to work with the MIT Computer Science & Artificial Intelligence Lab

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

ISKO announces its participation in CSAIL’s Alliances programme, a collaboration with CSAIL researchers, students and industry partners. Through participation in the programme, ISKO will contribute its expertise in textile innovation and collaborate on the research and development of smart textiles and wearable technologies.

The company joins a network of 26 industries – from startups to big organizations – including AI and machine learning, aerospace, healthcare, life sciences and telecommunications, as well as retail, media and entertainment.

With the goal of overall advancement of the textile and denim industry through the development of smart and wearable solutions, ISKO is stepping up to lead the change through these technologies and their many possible end-uses. The work is done in compliance with ISKO’s Responsible Innovation™ approach.

ISKO brings its innovative and agile structure, impressive production capacity and textile knowledge to the CSAIL programme which has over 1200 people, 60 research groups, 120+ researchers, 600+ students and over 900+ active projects.

Source:

ISKO / Menabò Group srl

01.04.2021

Devan/Jeanologia: Reduced water usage for post garment treatments

Devan, one of the leading companies in sustainable and functional textile finishes, has been working together with Jeanologia, a global leader in sustainable and efficient finishing technologies for textiles, to reduce further water consumption during the application of Devan’s awarded BI-OME® antimicrobial and R-Vital® skincare range.

With increased attention to climate change and limiting excess water consumption in textile production (whether denim or other textiles), Devan and Jeanologia worked together to evaluate the application of Devan finishes onto garments via the patented e-Flow technology.

Devan, one of the leading companies in sustainable and functional textile finishes, has been working together with Jeanologia, a global leader in sustainable and efficient finishing technologies for textiles, to reduce further water consumption during the application of Devan’s awarded BI-OME® antimicrobial and R-Vital® skincare range.

With increased attention to climate change and limiting excess water consumption in textile production (whether denim or other textiles), Devan and Jeanologia worked together to evaluate the application of Devan finishes onto garments via the patented e-Flow technology.

e-Flow technology can accomplish a considerable number of finishing effects with the highest quality, a minimal amount of water and zero discharge. The technology uses micronization and nebulization to substitute traditional abrasion process and deliver performance chemistry using nano-bubbles instead of water. It reduces the cost of application, saves the amount of water used and ensures that the correct amount of chemistry stays in the garment and not in the water. e-Flow is the perfect fit for every industrial washing machine. This allows mills and brands to apply Devan’s technologies in a more sustainable way than using traditional application equipment, even for smaller production runs and direct onto garments.

“With the global textile production using 4% of the global freshwater withdrawal, here at Devan we are continuously working on more sustainable solutions”, says Dr. Vanessa Daelman, CTO at Devan. “Next to this, we of course highly value sustainable application methods from Jeanologia, like e-Flow, in order to reduce the excess water usage during textile application. We are delighted that we could work together with Jeanologia and establish that Devan technologies can be easily applied via these technologies onto garments or fabrics like denim and with full retention of functionality. This application method also allows post garment treatment of our finishes, for example an antimicrobial treatment onto already finished garments, which will be increasingly important in a more circular textile world where re-use plays an important role”, Dr. Daelman concludes.

Source:

Marketing Solutions NV

 

Archroma and Jeanologia launch ‘Pad-Ox G2 Cold’, a water-saving dyeing process (c) Jeanologia
Jeanologia G2 Dynamic machine.
16.03.2021

Archroma and Jeanologia launch ‘Pad-Ox G2 Cold’, a water-saving dyeing process

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Jeanologia, a world leader in sustainable and efficient technology development, today announced the launch of ‘Pad-Ox G2 Cold’, a water-saving dyeing process at room temperature for casual looks.

Archroma initially introduced its eco-advanced Pad-Ox dyeing process for woven fabrics, and then used it as part of its ADVANCED DENIM concept. By combining the oxidation and fixation steps, it is possible to shorten the dyeing process and thus realize substantial resource savings in water, wastewater, cotton waste, and energy.

Over the years the company has worked with its textile manufacturers and partners to improve the Pad-Ox process, in particular woven applications such as chinos and casual wear. To achieve maximum positive impact, Archroma is using its Diresul® range of low sulfide sulfur dyes and, more recently, its innovative plant-based range of EarthColors®. A wide selection of dyes from these two ranges have received the Cradle-to-Cradle Product Innovation Institute’s Platinum Level Material Health Certification.

Archroma, a global leader in specialty chemicals towards sustainable solutions, and Jeanologia, a world leader in sustainable and efficient technology development, today announced the launch of ‘Pad-Ox G2 Cold’, a water-saving dyeing process at room temperature for casual looks.

Archroma initially introduced its eco-advanced Pad-Ox dyeing process for woven fabrics, and then used it as part of its ADVANCED DENIM concept. By combining the oxidation and fixation steps, it is possible to shorten the dyeing process and thus realize substantial resource savings in water, wastewater, cotton waste, and energy.

Over the years the company has worked with its textile manufacturers and partners to improve the Pad-Ox process, in particular woven applications such as chinos and casual wear. To achieve maximum positive impact, Archroma is using its Diresul® range of low sulfide sulfur dyes and, more recently, its innovative plant-based range of EarthColors®. A wide selection of dyes from these two ranges have received the Cradle-to-Cradle Product Innovation Institute’s Platinum Level Material Health Certification.

Meanwhile, Jeanologia has been working on the technology side, with laser and eco-finishing solutions for more than 25 years, accompanying the textile industry on their way to producing with zero discharge. In 2008, the company introduced its G2 Dynamic the first ozone treatment for continuous fabric that dramatically reduces the amount of water and chemicals used, while at the same time saving costs at the mill and eventually at the garment finishing facilities. This technology makes fabric more stable and consistent and prepares the fabric better for the use of other technologies like laser. This machinery can be used along with Pad-Ox technology to help cleaning fabric thus improve fastness results. While it allows process to work at room temperature.

Project focus on water saving
Archroma and Jeanologia therefore understandably decided to team up and combine their expertise in sustainable dyeing and finishing technologies. The objective of the project was to improve the Pad-Ox dyeing process even further, in particular in one area that still offered room for positive impact: temperature and fastnesses.

The new ‘Pad-Ox G2 Cold’ dyeing process works thanks to the insertion of very small machinery into the existing finishing range process, using cold processing and thus operating with much less water, carbon footprint and energy than traditional benchmark fabric finishing processes, whilst retaining the water and other resource savings offered by the Pad-Ox technology.

Maximum savings can be achieved by mills and garment manufacturers who wish to switch from a conventional dyeing process straight to ‘Pad -Ox G2 Cold’ to obtain high quality fabrics for comfortable and casual wear.

OFFICINA+39 reduces use of water with AQUALESS MISSION (c) OFFICINA+39
04.03.2021

OFFICINA+39 reduces use of water with AQUALESS MISSION

A technology to reduce 75% of the water typically used in denim and garment laundry processes, this innovation is evidence of the commitment by Officina+39 to a more sustainable production and planet.

An Italy-based reality with a thirty-year experience on research and chemical application in the textile sector, Officina+39 brings to the table its latest innovation, launched in occasion of Kingpins 24 Flash: the AQUALESS MISSION. It features three products for one innovative process suitable for conventional machines: REMOVER BC, a laser booster, AQUALESS AGED, a waterless compound to give denim abrasion effects and OZ-ONE POWDER, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look.

REMOVER BC
This special compound increases laser effect on indigo or dischargeable dyestuff, saving time and energy for a swifter production. Due to the speedy process it also prevents fabric tearing whilst focusing on giving a used look.

A technology to reduce 75% of the water typically used in denim and garment laundry processes, this innovation is evidence of the commitment by Officina+39 to a more sustainable production and planet.

An Italy-based reality with a thirty-year experience on research and chemical application in the textile sector, Officina+39 brings to the table its latest innovation, launched in occasion of Kingpins 24 Flash: the AQUALESS MISSION. It features three products for one innovative process suitable for conventional machines: REMOVER BC, a laser booster, AQUALESS AGED, a waterless compound to give denim abrasion effects and OZ-ONE POWDER, an advanced product to give garments a bleached yet eco-friendly treatment, for a worn and distressed look.

REMOVER BC
This special compound increases laser effect on indigo or dischargeable dyestuff, saving time and energy for a swifter production. Due to the speedy process it also prevents fabric tearing whilst focusing on giving a used look.

AQUALESS AGED
Ideal to give abrasion effects on denim, this waterless treatment has a reduced impact on the environment and can be applied in combination with Oz-One powder both on black and indigo denim.

OZ-ONE POWDER
The sustainable (chlorine and potassium permanganate free) way to give denim that distressed and worn look, with no need of water or high temperatures.

AQUALESS MISSION meets the needs of the industry to reduce water in manufacturing operations, pledging to meet UN’s 2030 SDG 6 of clean water and sanitation, and by doing so protects the planet and its resources.

Archroma and CleanKore join forces to promote sustainable, cost-effective indigo dyeing process (c) CleanKore
Below limits of detection according to industry standard test methods
02.02.2021

Archroma and Cleankore join forces to promote sustainable, cost-effective indigo dyeing process

Reinach, Switzerland, and Westlake, Ohio, 2 February 2021 - Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced a strategic partnership with technology innovator CleanKore, aiming to advance sustainable dyeing processes throughout the denim supply chain.

The agreement will allow Archroma and CleanKore to promote the benefits of each other’s technologies. This includes Archroma’s robust catalog of dyes and specialty chemicals along with CleanKore’s patented process of dyeing yarns at the denim mill that completely eliminates the need for potassium permanganate (PP) spray and laser booster to achieve the bright white abrasion effect in the garment finishing process. The result is a large and circular bright white core with a small ring of indigo dye. The technology does not just eliminate the chemicals associated in the PP spray and laser process, which is much safer for denim workers, it also allows to save significant amounts of water and energy throughout the manufacturing process from fabric to garmenting.

Reinach, Switzerland, and Westlake, Ohio, 2 February 2021 - Archroma, a global leader in specialty chemicals towards sustainable solutions, today announced a strategic partnership with technology innovator CleanKore, aiming to advance sustainable dyeing processes throughout the denim supply chain.

The agreement will allow Archroma and CleanKore to promote the benefits of each other’s technologies. This includes Archroma’s robust catalog of dyes and specialty chemicals along with CleanKore’s patented process of dyeing yarns at the denim mill that completely eliminates the need for potassium permanganate (PP) spray and laser booster to achieve the bright white abrasion effect in the garment finishing process. The result is a large and circular bright white core with a small ring of indigo dye. The technology does not just eliminate the chemicals associated in the PP spray and laser process, which is much safer for denim workers, it also allows to save significant amounts of water and energy throughout the manufacturing process from fabric to garmenting.

CleanKore initially looked at eliminating potassium permanganate due to its being classified as hazardous if inhaled or ingested, or in case of contact with the skin or the eye. It is also considered very toxic to aquatic life. No new equipment or capital expenses are needed to implement the CleanKore technology, which works on all denim fabric, including dark indigo, sulfur top/bottom and sulfur black.

This is where Archroma comes into the picture. Its global technical team of denim coloration specialists will provide support to denim mills seeking to implement the CleanKore technology and develop the desired looks and effects - with the right colors and chemical systems for their production set-up.

CleanKore estimates that the technology allows to save up to 15 liters of water per garment, or the equivalent to the drinking needs of 5 people per day, and up to 0.51 kWh of energy per garment, or the equivalent of five 100-watt light bulbs on for 1 hour. The CleanKore technology also leads to a 10% to 20% increase in production throughput, as a result of a faster garment wash-down and the elimination of PP spray.

For CleanKore CEO Darryl Costin Jr., the announcement comes at an ideal time for CleanKore: "We have successfully proven the technology with mill partners such as Arvind and other denim mills in Pakistan, Bangladesh, China, Vietnam, Thailand and the United States. The response from the industry has been overwhelmingly positive. Having a partner in Archroma, one that is highly respected for their innovation and emphasis on sustainability throughout the industry, will allow us to take CleanKore to the next level.”

Umberto Devita, Global Indigo Manager at the Archroma Global Competence Center for Denim & Casualwear, adds: "CleanKore is perfectly aligned with the 3 pillars of 'The Archroma Way to a Sustainable World: Safe, efficient, enhanced'. 'Safe' through the elimination of a potentially harmful substance and the protection of the denim workers, 'Efficient' through the reduction of resource consumption, improved productivity and cost-effective profile. And 'Enhanced' through the gorgeous colors and effects allowed with Archroma's innovations and systems, in particular our aniline-free* Denisol® Pure Indigo and Diresul® sulfur dyes. We look forward to help promoting an innovation that will help with many of the challenges facing our denim customers throughout the world. Because it’s our nature."

Source:

Archroma

Grup Transilvae moves into textile printing sector with Kornit partnership (c) Kornit
Kornit Digital by Kfir Ziv
27.11.2020

Grup Transilvae moves into textile printing sector with Kornit partnership

  • "We only promote products that we like and Kornit is offering a line up of technologically advanced equipment that can take our selected customers into the future of textile print on demand.”
  • Responding to market needs for textile print on demand

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, continues to expand its market reach through Grup Transilvae partnership.

Founded in 1993 in Cluj, Grup Transilvae later expanded its reach nationally with a move to Bucharest. It has since developed into a complete solutions and services provider following partnerships with key industry manufacturers such as HP, MGI Digital Graphic Technology, Canon, Esko, Caldera, Efi, X-Rite - Pantone and Fotoba International etc. It has also more recently agree to support Matic, Highcon, Xlam, Sefa, Chemica and PlastGrommet. Now the company is increasingly focusing on the textile industry which is why it is partnering with Kornit.

  • "We only promote products that we like and Kornit is offering a line up of technologically advanced equipment that can take our selected customers into the future of textile print on demand.”
  • Responding to market needs for textile print on demand

Kornit Digital (Nasdaq: KRNT), a worldwide market leader in digital textile printing technology, continues to expand its market reach through Grup Transilvae partnership.

Founded in 1993 in Cluj, Grup Transilvae later expanded its reach nationally with a move to Bucharest. It has since developed into a complete solutions and services provider following partnerships with key industry manufacturers such as HP, MGI Digital Graphic Technology, Canon, Esko, Caldera, Efi, X-Rite - Pantone and Fotoba International etc. It has also more recently agree to support Matic, Highcon, Xlam, Sefa, Chemica and PlastGrommet. Now the company is increasingly focusing on the textile industry which is why it is partnering with Kornit.

CEO Bogdan Vasilescu explains: "We started with color management solutions, working on demand for Fogra with digitally printed DMI colors on textiles. We have also worked with Mimaki, Roland, Epson and Vutek on various projects including Eurotex Iasi, Zara and Rofobit in Bucharest. Eager to continue our growth spurt in the textile printing industry, we were looking for a trusted partner and Kornit was the obvious choice.”

"The collaboration with Kornit began officially in September and is a natural progression,” Vasilescu adds. “For a number of years, we have been considering ways to improve our offering by moving into textiles in the same way that we did for sign and display, home decor or packaging. We were just waiting for the right partner. We are always looking to collaborate with market leaders and we wanted to work with Kornit to tap into the potential of the print on demand textile market with an extensive textile printing portfolio.”

Grup Transilvae will represent all Kornit’s textile solutions, including Direct to Garment and Direct to Fabric, particularly for T-shirts, activewear, denim, fashion, beachwear, home textiles and fabrics.

Vasilescu continues: “We are looking forward to showing our existing customers how they can take advantage of the Covid 19 accelerated trends in digital print-on-demand and short-run print jobs. We will signpost how they can expand their application range, grow volumes and experience better ROI.”

Vasilescu concludes: “We only promote products that we like and Kornit is offering a line up of technologically advanced equipment that can take our valued customers into the future of textile print on demand.”

Omer Kulka, CMO at Kornit Digital states: “We are delighted to announce another great partnership with a distributor that is as passionate about our products and the textile printing industry as we are. Grup Transilvae has a long history of successfully entering new markets with leading manufacturers. We look forward to a long and happy partnership.”

Moncler launches Grenoble collection with Dyneema® Composite Fabric (c) DSM Protective Materials
DSM Protective Materials DSMPMPR003b
11.11.2020

Moncler launches Grenoble collection with Dyneema® Composite Fabric

  • Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

  • Royal DSM, a global science-based company in Nutrition, Health and Sustainable Living, today announced that, for the first time, Dyneema® Composite Fabrics are used by Moncler in the Fall/Winter 2020 Grenoble collection, which fuses form and function into high performance skiwear.

Moncler Grenoble is born of a passion for research and implements cutting-edge technology to push the limits of its potential. The design team identified Dyneema® as an innovative fabric it could use to push the level of its performance to the next peak, incorporating the material into the new collection as a departure from the conventional use of cotton and polyester.

Sandro Mandrino, the Head of Design for Moncler Grenoble, was the first designer of the luxury fashion brand to incorporate Dyneema® into one of his creations through the Moncler Genius project. The Moncler Genius project advocates radical co-creation where multiple designers create their own signature collections in collaboration with the house. Together, these collections translate into one vision of the future and, as one of the nine designers, Mandrino’s interpretation of the future of fashion features Dyneema® Composite Fabric.

Using variations of the fabric in both white and black allowed Mandrino to bring his vision to life by merging skiwear, space suits and technology all in one. “ 3 Moncler Grenoble is first and foremost about performance,” states Mandrino, who integrated constructive solutions with fabric technology to develop a line that was meant to perform both on and off the ski slopes.

Dyneema®, the world’s strongest and lightest fiber, is 15 times stronger than steel yet light enough to float on water. The unmatched performance and protection of products made with Dyneema® have made it the material of choice in critical applications where failure is not an option for more than 30 years. In fabric form, Dyneema® is available in composites, denim, knits, wovens and hybrids for composite reinforcements. And because Dyneema® fabrics are made using Dyneema® fiber, they intrinsically provide high strength, low weight, waterproof and breathable properties – allowing designers to fuse the technical performance of ultra-light products with aesthetic design that doesn’t sacrifice strength or durability.

The Moncler team used the Grenoble collection as an opportunity to experiment and further understand the nature and behavior of Dyneema® fabrics, while simultaneously incorporating material performance with practical design. “Future collections will focus on expanding to new designs and fabric options in collaboration with DSM,” adds Mandrino.

“We are very excited to be working with the Moncler team to launch a collection of wonderful garments that allow people to explore the outdoors more safely and for longer periods of time,” states Marcio Manique, Global Business Director, Consumer & Professional Protection, DSM Protective Materials. “We look forward to further supporting Moncler as they develop innovative, high-tech garments that are also sustainably sourced through the introduction of bio-based Dyneema® fabrics.”

In line with DSM’s commitment to protect people and the environment they live in, the world’s first-ever bio-based ultra-high molecular weight polyethylene fiber was introduced in May 2020. Bio-based Dyneema® boasts the same exact performance as conventional Dyneema® with a carbon footprint that is 90 percent lower than generic HMPE. DSM and Moncler’s continued partnership will not only provide high performance, light weight garments for outdoor enthusiasts but also environmentally sustainable alternatives that contribute to a more circular economy.

(c) Tonello
12.10.2020

Tonello at DenimsandJeans Virtual Show

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability” said Alice Tonello, R&D and Marketing Director of Tonello. “The research for technologies and solutions have always been part of our DNA, is a daily commitment to the environment, the market, our people and all human beings with their needs.  Based on this vision, two revolutionary patent-pending process, are born, Wake and OBleach, that allow to create incredible and totally responsible effects on garments” continued Alice Tonello.

This is how The Laundry (R)Evolution was born: a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Metro is used, a software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

“When it comes to working on new developments, we always start from new ideas and the constant research that starts from a concept that becomes reality, by increasingly raising the bar of sustainability” said Alice Tonello, R&D and Marketing Director of Tonello. “The research for technologies and solutions have always been part of our DNA, is a daily commitment to the environment, the market, our people and all human beings with their needs.  Based on this vision, two revolutionary patent-pending process, are born, Wake and OBleach, that allow to create incredible and totally responsible effects on garments” continued Alice Tonello.

This is how The Laundry (R)Evolution was born: a radically new conception thought to simplify and optimize the entire garment finishing process.

It involves only 2 technologies in the entire finishing cycle, reducing waste and optimizing resources: LaserBlaze, and The All-in-One-System. Metro is used, a software that processes real data, in real time to check all laundry consumption, optimizing processing times and improving performance.

The All-in-One System performs all washing operations by integrating 4 sustainable technologies into a single machine: ECOfree 2, which uses ozone in both the water and air; NoStone® for authentic and pumice-free stone-wash effects; UP, for washing processes with at least 50% less water; Core, a nebulizing system improving performance and reducing water consumption.

In terms of effects, the latest results of the Laundry (R)evolution are OBleach and Wake.

OBleach is the new Tonello patent-pending process which, by using only ozone, “returns to the future” with an authentic, sustainable and cool Bleach.

Wake is the first totally natural dyeing system. In fact, it uses only plants and vegetable waste, organic items like flowers, berries and roots left to dry and infuse, without harmful chemicals additives.

Tonello will be live during DenimsandJeans Virtual Show on October 14th and 15th.

Source:

EFFE-BI SRL PR & COMMUNICATION

Monforts texCoat coating system (c) Monforts / AWOL Media
06.10.2020

Monforts at Innovate Textile & Apparel (ITA) 2020

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

During the Innovate Textile & Apparel (ITA) virtual textile machinery show which will run from October 15th-30th 2020, Monforts will be emphasising its leadership position in three key fields – advanced coating, denim finishing and fabric sanforizing.

With its multi-head capability, the latest Monforts texCoat coating system provides flexibility with an unprecedented range of options and a wide range of modules available.

Refinements
“Since we acquired the coating technology that our systems are based on we have made a lot of refinements and all of them are reflected in higher coating accuracy and the resulting quality of the treated fabrics,” says Monforts Head of Technical Textiles, Jürgen Hanel.
“Our systems have the shortest fabric path from the coating unit into the stenter and we have all variations of coating application systems too – and all of these options are available in wider widths, with the engineering and manufacturing from a single source here in Europe.”

CYD
Denim finishing is meanwhile a field in which Monforts has an undisputed lead and it has been working closely with its many partners in the key denim manufacturing countries of Bangladesh, Brazil, China, India, Mexico Pakistan and Turkey to develop advanced solutions. The latest of these is the CYD yarn dyeing system.
“CYD is based on the proven Econtrol® dyeing system for fabrics*,” explains Monforts Head of Denim Hans Wroblowski. “It integrates new functions and processes into the weaving preparatory processes – spinning, direct beaming, warping and assembly beaming, followed by sizing and dyeing – in order to increase quality, flexibility, economic viability and productivity. The CYD system has been developed in response to a very strong market demand.”

Pre-shrinking
Monforts has also recently delivered a significant number of its latest Monfortex sanforizing lines to customers around the world.
Sanforizing is vital to final fabric quality, pre-shrinking it by compressing prior to washing, to limit any residual or further shrinkage in a made-up finished garment to less than 1%, for perfect comfort and fit over an extended lifetime.

As with industry-leading Montex stenters, Monfortex lines benefit from the latest Qualitex 800 control system which allows all parameters to be easily automated via the 24-inch colour touchscreen, including production speed, control of all fabric feed devices, rotation spray or steaming cylinder options, the width of the stretching field and the rubber belt pressure. Up to 10,000 separate process parameter records can be generated and stored by the data manager.

 

*Econtrol® is a registered mark of DyStar Colours Distribution GmbH, Germany.

Denim Expert Ltd Logo
Denim Expert Ltd. starts to produce face masks
25.03.2020

Denim Expert Ltd: production of face masks and PPE

  • Bangladeshi supplier offers production capacity to produce face masks and PPE on non-profit basis
  •  Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis

A Bangladeshi garment manufacturer is offering the manufacturing capacity for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.
Many hospitals in Europe and USA are already running short of masks and PPE as they creak under the strain of the pandemic.
At present, COVID-19 is most prevalent in Europe, where demand for surgical masks and other protective garments has increased this past two months. However, other countries – including Bangladesh – are several weeks behind Europe but are expected to follow the same pattern in terms of cases and deaths.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

 

 

  • Bangladeshi supplier offers production capacity to produce face masks and PPE on non-profit basis
  •  Reaching out to global agencies to build partnerships to help tackle COVID-19 crisis

A Bangladeshi garment manufacturer is offering the manufacturing capacity for the production of protective face masks and Personal Protective Equipment (PPE) on a non-profit basis to help tackle the COVID-19 global pandemic.
Many hospitals in Europe and USA are already running short of masks and PPE as they creak under the strain of the pandemic.
At present, COVID-19 is most prevalent in Europe, where demand for surgical masks and other protective garments has increased this past two months. However, other countries – including Bangladesh – are several weeks behind Europe but are expected to follow the same pattern in terms of cases and deaths.

Denim Expert Limited Managing Director, Mostafiz Uddin, has reached out to the global community including brands & retailers, governments, embassies, donors, development agencies, global apparel associations and bodies in these unprecedented times.

 

 

Source:

Denim Expert Ltd.

(c) ISKO
12.03.2020

ISKO shared R-TWOTM, its 100% responsible platform, at Drapers Sustainable Fashion Forum

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Supporting the industry through innovation and creativity.

The leading denim ingredient brand hosted a special panel to discuss some of the pioneering advancements in technology that are making the fashion industry more responsible: from R-TWOTM to automated laser technology.

With the fashion industry being considered one of the world’s most polluting businesses-sectors, collaborating and knowledge sharing are key in finding solutions for a better future. Fully aware of this scenario, for the second year running, ISKO was the headline sponsor at Drapers Sustainable Fashion Forum, the authoritative event bringing together the most responsible players to discuss what can be done to tackle the industry’s environmental and social issues through innovation and creativity.

Sharing knowledge, collaborating for change.

As evidence of its pioneering Responsible InnovationTM approach, ISKO shared its founding values of creativity, competence and citizenship by showcasing the R-TWOTM program, its latest responsible achievement, in a dedicated stand.

Stemming from the mill’s holistic vision, R-TWOTM represents a great example of how reducing, reusing, and recycling strategies can be implemented in a textile business to improve its environmental performance. With the goal to create fabrics that can provide both quality and responsibility, ISKO has developed this platform, which deals with the most critical issue that apparel supply chains are currently faced with: using more than what actually needed.

Source:

ISKO

Logo monforts
Logo monforts
09.03.2020

Monforts ATC adventures in aquaculture

Monforts has recently been involved in a number of R&D trials aimed at improving the performance of the fishing cage nets employed in fish farming operations at its Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

The cultivation of both freshwater and saltwater fish populations under controlled conditions is a global industry valued at around $200 billion annually and only made possible with the use of huge aquaculture nets.

Monforts has recently been involved in a number of R&D trials aimed at improving the performance of the fishing cage nets employed in fish farming operations at its Advanced Technology Centre (ATC) in Mönchengladbach, Germany.

The cultivation of both freshwater and saltwater fish populations under controlled conditions is a global industry valued at around $200 billion annually and only made possible with the use of huge aquaculture nets.

Biofouling
“These nets are very prone to biofouling and to avoid its negative impacts, high-pressure robotic jets are now used to clean them,” explains Monforts Head of Technical Textiles Jürgen Hanel. “Net cleaning is expensive and can also damage current antifouling coatings on the nets, causing contamination as well as fish health and welfare risks.
The development of more effective antifouling coatings for fishing cage nets has been one aspect of R&D work at the Monforts ATC, while the use of how alternative fibres could potentially be coated or finished to replace the polyamide which is currently most widely used has also been explored.
The issue of plastics and synthetic fibres in the oceans has generated global media attention recently, and the aquaculture industry is exploring all avenues that will lead to more sustainable practices.

Expansions
Since its opening in 2013, over €3 million has been invested in equipment at the Monforts ATC, which over an area of 1,200 square metres houses two full finishing lines, engineered to accommodate an extremely diverse range of processes, in addition to a Thermex range for the continuous dyeing of denim.

Source:

AWOL Media

The first Platinum Cradle to Cradle Certificate awarded to Rajby Textiles. (c) AWOL Media
The first Platinum Cradle to Cradle Certificate awarded to Rajby Textiles.
12.02.2020

World’s first C2C Platinum for Rajby Textiles

Monforts customer Rajby Textiles is the first company in the world to have finally achieved the Cradle to Cradle (C2C) Platinum Standard for a product. Its Beluga denim fabrics have gained the ultimate sustainability score in all five categories covered by the C2C standard, which is acknowledged as involving the toughest and most thorough testing and assessment it is possible to put a product through.

As such, Beluga denim fabric is based on 100% GOTS certified organic cotton and employs no hazardous chemicals in its production. At the same time, it is both recyclable and biodegradable, with 100% of the energy used in its production offset by green energy and involving a closed loop system with no waste water generated and no material wastage.

The new Beluga denim fabrics, however, represent a new zenith in circular denim production. To meet the active cycling requirement, Rajby has committed to using Beluga denim fabric exclusively in apparel products sold by retailers with take back programmes in place and estimated expected cycling rates for such products

Monforts customer Rajby Textiles is the first company in the world to have finally achieved the Cradle to Cradle (C2C) Platinum Standard for a product. Its Beluga denim fabrics have gained the ultimate sustainability score in all five categories covered by the C2C standard, which is acknowledged as involving the toughest and most thorough testing and assessment it is possible to put a product through.

As such, Beluga denim fabric is based on 100% GOTS certified organic cotton and employs no hazardous chemicals in its production. At the same time, it is both recyclable and biodegradable, with 100% of the energy used in its production offset by green energy and involving a closed loop system with no waste water generated and no material wastage.

The new Beluga denim fabrics, however, represent a new zenith in circular denim production. To meet the active cycling requirement, Rajby has committed to using Beluga denim fabric exclusively in apparel products sold by retailers with take back programmes in place and estimated expected cycling rates for such products

More information:
Rajby C2C
Source:

AWOL Media