From the Sector

Reset
3 results
14.03.2018

JEC WORLD 2018 in Paris Treffpunkt für die gesamte Verbundwerkstoffindustrie

Nach drei Tagen dynamischen Networkings und Know-how-Austausches schloss die JEC World 2018 ihre Tore am 8. März mit einem neuen Besucherrekord.

Mit dieser Messe konnte JEC-Gruppe, Spitzenreiter im Bereich der Förderung und Entwicklung der Verbundwerkstoffindustrie, erneut ihre führende Position unter Beweis stellen. So begrüßte die JEC WORLD 2018 mehr als 1.300 Aussteller aus allen Kontinenten und zählte 42.445 Fachbesucher aus 115 Ländern.

„Dass die JEC-Gruppe in der Lage ist, die gesamte Verbundwerkstoffindustrie drei Tage lang unter einem Dach zu versammeln, hat sicherlich damit zu tun, dass wir immer wieder neue Vorreiterprogramme im Dienste der Composite-Industrie auf den Weg bringen“, erklärt Frédérique MUTEL, Präsidentin und CEO der JEC-Gruppe.

Nach drei Tagen dynamischen Networkings und Know-how-Austausches schloss die JEC World 2018 ihre Tore am 8. März mit einem neuen Besucherrekord.

Mit dieser Messe konnte JEC-Gruppe, Spitzenreiter im Bereich der Förderung und Entwicklung der Verbundwerkstoffindustrie, erneut ihre führende Position unter Beweis stellen. So begrüßte die JEC WORLD 2018 mehr als 1.300 Aussteller aus allen Kontinenten und zählte 42.445 Fachbesucher aus 115 Ländern.

„Dass die JEC-Gruppe in der Lage ist, die gesamte Verbundwerkstoffindustrie drei Tage lang unter einem Dach zu versammeln, hat sicherlich damit zu tun, dass wir immer wieder neue Vorreiterprogramme im Dienste der Composite-Industrie auf den Weg bringen“, erklärt Frédérique MUTEL, Präsidentin und CEO der JEC-Gruppe.
„In diesem Jahr haben wir beispielsweise neue Programme wie die „Composite Challenge“ eingeführt, die 10 Doktoranden die Möglichkeit bot, ihre Doktorarbeit den Teilnehmern aus der Industrie in großen Zügen zu präsentieren. So wird gleichzeitig die Kontaktaufnahme zwischen Studierenden und der Industrie gefördert. In diesem Sinne haben wir auch unser „Startup Booster“-Programm und die Innovation Awards noch weiter ausgebaut, um die Beziehungen zwischen jungen oder innovativen Unternehmen und Investoren oder etablierten Unternehmen zu intensivieren. Darüber hinaus haben wir neben den Planeten Luft- und Raumfahrt, Automobil und Bauwesen einen neuen Planeten namens „Make it Real” eingeführt. Hier wurden ganz erstaunliche futuristische Produkte vorgestellt, wie zum Beispiel das Aeromobil, ein fliegendes Auto, das in naher Zukunft den Stadtverkehr revolutionieren könnte“, fügt sie hinzu. „Zudem haben wir unser neues Buch zum Thema Naturfasern herausgebracht: „Flax und Hemp“ (Flachs und Hanf). Wir haben intensiv zu den Themen Composites unter ökologischen Gesichtspunkten und Recycling kommuniziert.“

Die Messe wurde darüber hinaus zur ersten Plattform für die Förderung der neuen Initiative „French Fab“, ein Programm der französischen Regierung, mit dem die französische Industrie und Produktion international gefördert werden sollen. Auch begrüßte die JEC World die französische Staatssekretärin im Wirtschafts- und Finanzministerium, Delphine GÉNY-STEPHANN; ein Besuch, der die zunehmende Bedeutung der Verbundwerkstoffe in der Industrie deutlich zum Ausdruck bringt.

Beeindruckende Vorträge zur Förderung des Composite-Durchbruchs
Dirk AHLBORN, CEO von Hyperloop, eröffnete die Startup-Booster-Zeremonie und hob den Einfallsreichtum in der Industrie hervor. Dayton HORVATH, Branchenexperte und Consultant im Bereich Additive Fertigung, stellte seine Vision davon vor, wie künstliche Intelligenz bei Verbundwerkstoffmate-rialien und herstellung zum Einsatz kommen könnten. Yves ROSSY, auch bekannt als Jetman, der die neuesten Flugzeug-Tragflächen aus Kohlefaser einsetzt, eröffnete schließlich die Verleihung der JEC Innovation Awards. Er ermutigte das Publikum an, die eigenen Träume nicht aufzugeben, und erklärte, wie Verbundwerkstoffe ihm die Verwirklichung seiner Träume ermöglichten.

Die Gewinner der Publikumswahl
Ein Novum auf der diesjährigen Ausgabe der Messe war die Publikumswahl, bei der die Teilnehmer ihren Favoriten unter den beiden JEC-Programmen zur Innovationsförderung wählen konnten. „Mit der Einführung des Publikumspreises wollten wir die gesamte Branche ansprechen und mit einbeziehen, um deren Innovationen eine Plattform zu verschaffen. Unsere Vision bei JEC ist es, die große Bandbreite an Möglichkeiten, die Verbundwerkstoffe bietet, einem breiteren Publikum gegenüber deutlich und verständlich zu machen“, so Anne-Manuèle HÉBERT, Direktorin der JEC World und Europäischen Veranstaltungen der JEC-Gruppe.

Publikumspreis für Startup Booster:
Inca-Fiber (Deutschland) mit 62,36% von 2.221 Stimmen

Publikumspreis für die JEC Innovation Awards:
Infusionstechnik für einen Tragflügel von AeroComposit JSC (Russland) mit 20,96 % von 4.126 Stimmen

More information:
JEC World 2018 JEC-Gruppe
Source:

AGENCE APOCOPE

JEC World 2018 (c)AGENCE APOCOPE
Crowded aisle of JEC World 2018
08.03.2018

JEC World 2018: Composites Industry in Paris

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises.

  • JEC World 2018, closes its doors on March 8 with a record increase in attendance resuming 3 days of vibrant networking and knowledge sharing.

The event confirms its leading position of JEC Group as number one organization for the promotion and development of the composites industry. Indeed the show welcomed more than 1,300 exhibitors from every continents and counted 42,445 professional visits from 115 countries. “The ability of JEC Group to gather the whole composites Industry under one roof over 3 days lies in the fact that we always initiate new precursory programs to the service of composites professionals.” says Ms. Frédérique Mutel, JEC Group President & CEO. “This year we initiated new programs, for instance the Composite Challenge allowing 10 PhD students to pitch their thesis in front of the industry, thus facilitating connections between students and industrialists. In the same spirit, we increased in power our Start Up Booster and Innovation Award Programs to accelerate relations between young or innovative companies with investors or established enterprises. We also introduced one new planet called “Make it Real” along with the Aero, Auto and Construction planets. In this planet, we could discover astonishing futuristic products for example the Aeromobil, a flying car that would revolutionize urban transportation in the near future,“ she adds. “We launched our new Book on Natural Fibers: Flax and Hemp. We had strong communications on Composites Environmental Input and Recycling.”

The event was the first event to promote and host the new “French Fab”, a French government initiative to internationally promote the French Industry and Manufacture. Also, JEC World welcomed the French Secretary of State to the Minister of Economy and Finance Ms. Delphine Gény-Stephann, visit that demonstrates the growing role of composites in the industry.

Inspiring Keynotes to foster composites disruption

Dirk Ahlborn,CEO of Hyperloop opened the Startup Booster ceremony by supporting the spirit of ingenuity in the Industry. Dayton Horvath, industry expert and consultant in additive manufacturing presented his vision of how to apply artificial intelligence to composite Materials and Manufacturing. Finally, Yves Rossy, the “jetman” using the latest carbon-fiber wings for flight introduced the JEC Innovation awards ceremony, motivating the audience to pursue their dreams and explaining how composites could made his dreams come true.

The "Public Choice” Awards Winners

A first at the show this year was the introduction of the public votes to elect their favorite projects among two JEC programs promoting innovation. “The goal to create the “public choice awards” was to involve and embark our community to make their innovation loud. Our vision at JEC is to demonstrate and to make understand towards a broader scope the vast range of possibilities that composite materials offer.”
comments Ms. Anne-Manuèle Hébert, Director for JEC World and European Events for JEC Group.

Public Choice Award for Startup  Booster: Inca-Fiber (Germany) with 62.36% of the 2,221 votes
Public Choice Award for JEC Innovation Awards: Infusion technology for an aircraft wing by AeroComposit JSC (Russia) gaining 20.96% of the 4,126 votes.

Source:

AGENCE APOCOPE

26.02.2018

Hexcel’s Product Innovations for Aerospace, Automotive, Wind Energy and Marine at JEC WORLD 2018

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

STAMFORD, February 26, 2018 - at JEC World 2018, taking place in Paris March 6-8, Hexcel will display an array of product innovations for customer applications in aerospace, automotive, wind energy and marine markets.
Hexcel’s banner at the exhibit hall entrance features the Airbus H160 helicopter and A350 XWB aircraft, both with carbon fiber livery to acknowledge the high Hexcel composites content in both programs. Hexcel’s reinforcements, prepregs, adhesives and honeycomb materials were selected for the H160’s composite fuselage structures and main rotor blades, contributing to the lightweight fuel-saving design and performance optimization. Airbus has loaned Hexcel an H160 BLUE EDGE blade to display on the booth.

Among the Aerospace promotions at Hexcel’s booth are carbon-reinforced 3D printed parts, made from Hexcel’s HexAM™ additive manufacturing technology that uses PEKK ultra-high performance polymers. Hexcel acquired this technology from Oxford Performance Materials in December 2017 to provide a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Aircraft engines benefit from a number of Hexcel technologies that will be promoted at JEC 2018, including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.
Another honeycomb innovation from Hexcel is Acousti-Cap® broadband noise-reducing honeycomb that significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs. An example of this technology will be on display at JEC 2018.

Rounding off the aircraft engine exhibits is a CTi fan blade for new generation lightweight turbofan engines from Rolls-Royce, manufactured from Hexcel’s HexPly® M91 high toughness and impact-resistant epoxy prepreg. Hexcel supplies HexPly® M91 as slit tape for the automated lay-up of the complex aerodynamic shape, with a constantly changing thickness across the blade length. The blade which is thinner and lighter than titanium fan blades is currently undergoing flight tests.
Hexcel’s HiTape® and HiMax™ dry carbon reinforcements that were developed for the automated lay-up of preforms for resin-infused aerospace structures will be promoted at the show. Two demonstrator parts, one made with HiMax™ and one with HiTape®, were both infused with HexFlow® RTM6 resin to demonstrate the potential benefits of an integrated design for aircraft skins, spars and stiffeners that meets OEM requirements for production rate increases and cost effectiveness.

Hexcel is also introducing its new range of HiFlow™ advanced liquid resins for aerospace structures manufactured by liquid molding technologies. Based on novel proprietary chemistry, the new resin family will enhance the performance of composites and ease processing when combined with HiTape® and HiMax™ dry carbon reinforcements. HiFlow™ HF610 is the first resin in the range.
Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil last October. Hexcel is relaunching the acquired products under the new HexBond™ brand name at JEC World. This fast-growing range of pastes, liquid shim and film adhesives has a wide spectrum of operating temperatures and is in qualification with a large number of aerospace and industrial OEMs.
In the Planet Aerospace area at JEC, Daher and Hexcel will jointly display an aircraft spar manufactured from HexPly® M56 prepreg. Hexcel’s Neil Parker and Daher R&T Director Dominique Bailly will give a joint presentation focusing on the materials used and the benefits for the finished part. The aircraft spar was designed and manufactured by Daher using Hexcel’s HexPly® M56 prepreg, in slit tape format, that was developed for automated deposition and out-of-autoclave curing. The spar was manufactured using only the vacuum bag process and demonstrates very low porosity levels. It is currently undergoing testing and validation through CORAC funding.

Hexcel’s Automotive promotions at JEC World 2018 include a new prepreg for composite leaf springs, HexPly® M901. In contrast to steel leaf springs used for suspension on vans, trucks and SUVs, newer composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. Hexcel’s HexPly® M901 prepreg raises the bar further, reducing mold cure time below 15 minutes, a 50% reduction compared to standard industrial prepregs. HexPly® M901 provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure. Hexcel’s expertise in manufacturing heavy weight glass UD prepregs, with fiber areal weights of up to 1600gsm, allows the company to offer a highly cost-competitive solution for the rapid manufacture of these safety critical components.

Hexcel is constantly seeking ways to ensure that customers obtain the maximum benefit from composites and has recently acquired state-of-the-art simulation technology that accurately predicts how HiMax™ non-crimp fabrics will drape in a mold. Working in collaboration with Nottingham University Hexcel has created a car seat shell, for which the material selection was optimized using this new drape simulation technology. Visitors to Hexcel’s stand at JEC will see an on-screen demonstration that illustrates how the simulation tool operates, predicting process and performance and ensuring that the optimum fabric architecture is quickly identified, reducing the need for expensive trial programs.
Hexcel’s HexMC®-i 2000 carbon fiber/epoxy molding compound has been successfully used by Audi to manufacture a high-performance engine cross brace. HexMC®-i is a fast curing high-performance molding material, suitable for the series production of complex shaped parts and providing excellent mechanical properties. The Audi cross brace covers the engine, providing torsional stiffness for enhanced drive dynamics.

Hexcel’s product offering for customers in the Marine industry has expanded following the acquisition of Formax in 2016 and Structil in 2017. At JEC World, Hexcel will promote its enhanced portfolio of carbon fibers, prepregs, woven reinforcements and multiaxial fabrics for builders of racing catamarans and luxury yachts.
Marine customers have supplied a number of parts for display to illustrate their expertise in manufacturing composite structures from Hexcel materials. These include part of a Diam 24 yacht mast made by ADH Inotec from Hexcel’s HexPly® M79 fast curing, low temperature cure prepreg. ADH Inotec purchased the prepreg from Composites Distribution, a Hexcel Official Distributor that also supplied HexPly® M9.6 prepreg to Lorima for the Outremer 5X catamaran mast section on display. Part of Lorima’s 42m wing mast for a multihull racing boat made with HexPly® prepreg from Vert-Le-Petit (formerly Structil) will complete the marine display.

Hexcel’s innovations for Wind Energy include Polyspeed® pultruded laminates for load-carrying elements in wind blades. These continuous cross-section profiles, made from a polyurethane matrix reinforced with unidirectional carbon fiber, provide consistently high mechanical properties, including high stiffness, fracture toughness and shear strength, combined with low weight and durability. Visitors to Hexcel’s stand will see a 2m diameter coil of pultruded carbon laminate that contains 255m of material in a single roll. This technology offers an economical way of reinforcing large-scale composite structures such as wind turbine blades. Hexcel will also launch its surface finishing prepreg for wind turbine blades and components. This provides a tough, durable and ready-to-paint blade surface without the use of gel coat and results in faster blade manufacture, saving time in production and reducing material costs. The benefits of the new surfacing prepreg will be demonstrated via a wind blade exhibit that has been given four different treatments across the blade surface. These include a section with gel coat, a section of standard prepreg without gel coat, and a section where a fleece has been added to improve surface quality but still requires preparation before painting due to pin holes. The final section made with new HexPly® XF2P surfacing prepreg has a ready-to-paint surface, straight from the mold, without any requirement for gel coat, fleece or finishing operations.

More information:
Hexcel JEC World 2018 Aircraft
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE