From the Sector

Reset
14 results
Erema Team Chinaplas Foto: Erema
12.03.2024

EREMA: PET-Recycling auf der Chinaplas 2024

Die Bottle-Systeme des österreichischen Recyclingmaschinenbauers EREMA sind seit 25 Jahren am Markt, knapp 50 Prozent der in den letzten drei Jahren ausgelieferten Bottle-Anlagen wurden in Asien installiert. Die Herstellung von lebensmitteltauglichem rPET rückt dort immer mehr in den Fokus – auch in der Textilbranche. EREMA unterschreitet nicht nur die strengen Grenzwerte der weltweit anerkannten europäischen und nordamerikanischen Behörden für Lebensmittelsicherheit, sondern auch jene von globalen Markenartiklern. Bei der Chinaplas von 23. bis 26. April 2024 in Shanghai präsentiert das Unternehmen sein Portfolio.

Die Bottle-Systeme des österreichischen Recyclingmaschinenbauers EREMA sind seit 25 Jahren am Markt, knapp 50 Prozent der in den letzten drei Jahren ausgelieferten Bottle-Anlagen wurden in Asien installiert. Die Herstellung von lebensmitteltauglichem rPET rückt dort immer mehr in den Fokus – auch in der Textilbranche. EREMA unterschreitet nicht nur die strengen Grenzwerte der weltweit anerkannten europäischen und nordamerikanischen Behörden für Lebensmittelsicherheit, sondern auch jene von globalen Markenartiklern. Bei der Chinaplas von 23. bis 26. April 2024 in Shanghai präsentiert das Unternehmen sein Portfolio.

Lebensmittelechtes rPET im Aufwind – auch in der Textilindustrie
Zusätzlich zum Lebensmittelbereich spielt lebensmittelkonformes rPET in der Textilindustrie eine zunehmend größere Rolle. Rund zwei Drittel der Gesamtmenge an PET fließen in die Produktion von synthetischen Fasern. EREMA reagierte darauf mit der Gründung einer eigenen Business Applikation für Fasern und Textilien.
Marken setzen immer öfter auf recyceltes PET als Ausgangsmaterial, das den Anforderungen für Food Grade entspricht, um ihren Kunden nachhaltige, gesundheitlich unbedenkliche Textilien anbieten zu können. Ein Trend, der sich bei EREMA im steigenden Absatz von Bottle-to-Fibre Anwendungen widerspiegelt. Asien ist in diesem Segment ein wichtiger Markt.

Schonende Materialaufbereitung für Faser-zu-Faser
Speziell für das Faser-zu-Faser-Recycling wurde die INTAREMA® FibrePro:IV Maschine entwickelt. Durch die Kombination der INTAREMA® Technologie mit dem neuen IV-Uptimiser gelingt es, durch Spinnöle stark kontaminierte geschredderte PET-Fasermaterialen so aufzubereiten, dass aus dem Regranulat wieder feinste Fasern produziert werden können. Die Anlage zeichnet sich durch eine gezielt aktive Oberflächenerneuerung der Schmelze unter Vakuumatmosphäre aus, wodurch Spinnöle und andere Hilfsstoffe effizienter entfernt werden als bei herkömmlichen PET-Recyclingverfahren. Nach der Extrusion wird im IV-Uptimiser die intrinsische Viskosität durch Polykondensation der PET-Schmelze wieder auf jenes Niveau erhöht, wie es für die jeweilige Faserproduktion nötig ist.

Um die Entwicklungen im PET-Faserrecycling voranzutreiben hat die EREMA Gruppe ein eigenes Faser-Technikum am Stammsitz in Ansfelden, Österreich geschaffen. Hier betreibt ein interdisziplinäres Team eine umfangreich ausgestattete und variable Recyclinganlage im Industriemaßstab. Sie ist mit der notwendigen Peripherietechnologie ausgerüstet und steht auch Kunden für Testläufe zur Verfügung.

More information:
rPET EREMA EREMA Group Chinaplas
Source:

EREMA Group GmbH

Manfred Hackl, CEO der EREMA Group Copyright: Erema Group
Manfred Hackl, CEO der EREMA Group
03.08.2023

Lindner & Erema gründen gemeinsame Holding

Erema Group und die Lindner Holding gründen gemeinsam die Holding BLUEONE Solutions, um die Expertise aus beiden Unternehmen zu bündeln und durch gemeinsame Forschungsprojekte Branchenstandards im Kunststoffrecycling zu schaffen.

Vom Abfall bis hin zum recycelten Granulat durchlaufen potentielle neue Rohstoffe mehrere unterschiedliche Recyclingprozesse. Diese reichen vom Sortieren, dem Zerkleinern, Waschen und Trocknen bis hin zur Extrusion inkl. Filtrierung, Compoundierung sowie Geruchsoptimierung.

In der optimalen Feinabstimmung der einzelnen Recyclingschritte liegt die Herausforderung der Branche – insbesondere, wenn Energieeffizienz und hohe Rezyklatqualitäten erreicht werden sollen. Mit der Gründung von BLUEONE Solutions, einem Unternehmen an dem die Erema Group und die Lindner Holding jeweils 50 % halten und in die Anteile der Lindner Washtech eingebracht wurden, soll da angesetzt werden. Durch Abstimmungs- und Optimierungsprozesse sowie durch neue gemeinsame Forschungsprojekte, wird die Wertschöpfungstiefe deutlich erhöht und neue Branchenstandards gesetzt.

Erema Group und die Lindner Holding gründen gemeinsam die Holding BLUEONE Solutions, um die Expertise aus beiden Unternehmen zu bündeln und durch gemeinsame Forschungsprojekte Branchenstandards im Kunststoffrecycling zu schaffen.

Vom Abfall bis hin zum recycelten Granulat durchlaufen potentielle neue Rohstoffe mehrere unterschiedliche Recyclingprozesse. Diese reichen vom Sortieren, dem Zerkleinern, Waschen und Trocknen bis hin zur Extrusion inkl. Filtrierung, Compoundierung sowie Geruchsoptimierung.

In der optimalen Feinabstimmung der einzelnen Recyclingschritte liegt die Herausforderung der Branche – insbesondere, wenn Energieeffizienz und hohe Rezyklatqualitäten erreicht werden sollen. Mit der Gründung von BLUEONE Solutions, einem Unternehmen an dem die Erema Group und die Lindner Holding jeweils 50 % halten und in die Anteile der Lindner Washtech eingebracht wurden, soll da angesetzt werden. Durch Abstimmungs- und Optimierungsprozesse sowie durch neue gemeinsame Forschungsprojekte, wird die Wertschöpfungstiefe deutlich erhöht und neue Branchenstandards gesetzt.

Die Erema Group ist seit 40 Jahren im Kunststoffrecycling tätig und gilt als der Marktführer im Bereich der Extrusion. Lindner, seit 75 Jahren Qualitätshersteller von Schreddern und Recyclinganlagen für die Abfallwirtschaft, ist mit der Marke Lindner Washtech seit 10 Jahren als Waschanlagen-Spezialist weltweit präsent. Gemeinsame Forschungsprojekte, wie beispielsweise die Versuchsanlagen in der LIT Factory an der Johannes-Kepler-Universität (JKU) Linz, haben die Firmen bereits vor Jahren in einen intensiven fachlichen Austausch treten lassen.

Optimierung der Recyclingprozesse
Mit der Gründung von BLUEONE Solutions liegt der Fokus auf der Weiterentwicklung des Kunststoffrecyclings. Lindner bringt die Erfahrung im Aufbereiten von Abfallströmen und die Expertise im Waschen und Erema das Know-how im Bereich Extrudieren und Filtrieren mit ein. Synergien sollen genutzt und die Optimierungen des Gesamtkreislaufes ermöglicht werden.
„Essenziell für eine funktionierende Recyclingwirtschaft wird sein, dass die gesamte Prozess- bzw. Wertschöpfungskette – von der Abfallsammlung und Aufbereitung über das Recycling bis hin zum Kunststoff-Endprodukt – im Fokus der agierenden Unternehmen steht. Durch diesen Firmenzusammenschluss schaffen Erema und Lindner ein besseres Gesamtverständnis, um dadurch speziell im Polyolefinebereich die erforderliche Weiterentwicklung gemeinsam zu prägen“, erklärt Manfred Hackl, CEO der EREMA Group. „Im Detail betrachtet, können der Recyclingextruder, die vorgeschaltete Waschanlage sowie Materialhandling optimal aufeinander abgestimmt werden, so dass Qualitätsstandards bestmöglich erfüllt und Energiekosten optimiert werden können – dank prozessübergreifender Steuerung & Monitoring, gestützt durch digitale Lösungen. In Zukunft werden wir perfekt abgestimmte All-in-one-Lösungen anbieten, die es unseren Kunden ermöglichen, ein Gesamtpaket zu kaufen, das exakt auf ihre Anwendungen abgestimmt ist.“

More information:
EREMA EREMA Group Lindner Recycling
Source:

EREMA Group GmbH

(c) EREMA
Manfred Hackl, CEO EREMA Group GmbH
17.05.2023

EREMA: Manfred Hackl is Plastics Recycling Ambassador of the Year

Manfred Hackl, CEO of EREMA Group GmbH, was recently awarded the accolade Plastics Recycling Ambassador of the Year at the Plastics Recycling Show Europe. The award is given in honour of personalities who are particularly committed to plastics recycling.
 
Manfred Hackl has been with EREMA since 1995 and, prior to joining the management team, was responsible for the product development and market launch of VACUREMA technology that closed the loop in the bottle-to-bottle segment efficiently and cost effectively. In his current role as CEO of the EREMA Group and in various roles in well-known national and international associations he promotes plastics recycling and circular economy across the industry, regionally and throughout Europe - especially at EU level - encouraging everybody in the industry to work together.

Manfred Hackl, CEO of EREMA Group GmbH, was recently awarded the accolade Plastics Recycling Ambassador of the Year at the Plastics Recycling Show Europe. The award is given in honour of personalities who are particularly committed to plastics recycling.
 
Manfred Hackl has been with EREMA since 1995 and, prior to joining the management team, was responsible for the product development and market launch of VACUREMA technology that closed the loop in the bottle-to-bottle segment efficiently and cost effectively. In his current role as CEO of the EREMA Group and in various roles in well-known national and international associations he promotes plastics recycling and circular economy across the industry, regionally and throughout Europe - especially at EU level - encouraging everybody in the industry to work together.

"I dedicate the Recycling Ambassador of the Year award to the employees at the EREMA Group. This year we are celebrating our 40th anniversary, and this award, just like the many we have received for our technologies over the years, shows that we can be very proud of what we have accomplished and achieved together during this time," says Manfred Hackl, delighted with the award. In the past business year 2022/23 alone, the extruders supplied by the companies within the EREMA Group deliver an additional 1.6 million tonnes of recycling capacity.

Source:

EREMA Group GmbH

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe

(c) PURE LOOP
07.09.2022

PURE LOOP: High-strength synthetic nonwoven made with a recycled content of 10 percent

Geosynthetics have become an indispensable part of the construction industry. PP nonwovens, for example - mechanically bonded continuous fibres made from specially UV-stabilised polypropylenes - are often used in blanket form as barriers, screens and filters, and their strength extends the service life of construction projects. Whether for road construction, or as barrier on glaciers or against weeds - there are myriad applications.

TenCate Geosynthetics uses the PURE LOOP ISEC evo technology to recycle this type of PP nonwoven. The European company, with locations in Austria, France and the Netherlands, is specialised in the development and production of geotextiles for modern civil engineering applications. The edge trimmings and production rejects generated during manufacturing used to be recycled at the Linz site, but not fed back into the company's own production process.

Geosynthetics have become an indispensable part of the construction industry. PP nonwovens, for example - mechanically bonded continuous fibres made from specially UV-stabilised polypropylenes - are often used in blanket form as barriers, screens and filters, and their strength extends the service life of construction projects. Whether for road construction, or as barrier on glaciers or against weeds - there are myriad applications.

TenCate Geosynthetics uses the PURE LOOP ISEC evo technology to recycle this type of PP nonwoven. The European company, with locations in Austria, France and the Netherlands, is specialised in the development and production of geotextiles for modern civil engineering applications. The edge trimmings and production rejects generated during manufacturing used to be recycled at the Linz site, but not fed back into the company's own production process.

"The demands on us were high," recalls Patrick Wiesinger, project manager at PURE LOOP. "The PP nonwoven is highly tear resistant, which means its a very challenging recycling process. Our ISEC evo machine conserves the quality of the production waste really well during recycling, so we were able to achieve the specified increase in quality for the recyclates."

Another advantage of PURE LOOP technology is the wide range of shapes in which the production scrap can be delivered for processing. "Our ifeed technology with double feed ram system and singleshaft shredder offers the ideal conditions for direct processing of these large rolls - and without the need for prior preparation of the input material by employees before the material is fed into the recycling process", emphasizes Patrick Wiesinger. With the ISEC evo recycling machine TenCate can now manufacture its high-strength PP nonwoven product with a recyclate content of up to 10 percent.

Source:

PURE LOOP, EREMA Group GmbH

28.06.2022

EREMA Gruppe and Borealis: K 2022 preview

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

On June 13, EREMA Group and Borealis invited representatives of the international plastics and recycling trade press to Upper Austria for a sneak preview of the technological developments and lighthouse projects that the companies will present at K 2022, the plastics industry's international meeting place. The venue for the pre-K event was EREMA Group headquarters in Ansfelden.

EREMA Group K 2022 preview
In Düsseldorf, the subsidiaries of the EREMA Group - which are EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC - will present their technological innovations, services and support together at a Group trade fair stand for the first time. Seven new recycling systems and components will be presented that enable large-scale plants with a production capacity of up to 6 t/h while setting a milestone in recyclate quality and process stability. This is made possible by technological innovations in the plasticizing unit that have been specially developed for high throughputs with low specific energy consumption, the new EREMA 406 laser filter with a 50 percent larger screening area, and new digital assistance systems that will be launched at K 2022 and made available on the BluPort® customer platform. These include, for example, the PredictOn app, which helps to anticipate and eliminate imminent malfunctions based on continuous measurement and evaluation of machine data.

New series of machines for new target groups
For customers looking for rapidly available recycling systems for simple applications, EREMA Group subsidiary UMAC has an innovation in store for K 2022. The company, which has so far specialised in refurbishing and trading in previously owned equipment, is expanding its business area and in Düsseldorf will launch READYMAC, a standardised, prefabricated recycling solution that can be produced from stock, based on proven EREMA TVE technology.

Finally, in the inhouse recycling segment, PURE LOOP and PLASMAC will round off the wide range of machines offered by the group of companies with their product portfolio.

Live recycling and lighthouse projects at the Circonomic Center
In the outdoor area of the K show, EREMA will bring plastics recycling to life with live demonstrations in conjunction with cooperation partners. Different waste streams are processed for this purpose. The wide variety of high-quality applications for recyclate will be showcased in the "products made of recyclate" exhibition, ranging from technical components to consumer goods and food packaging.

Borealis – accelerating the transition towards a more circular future
Borealis is committed to using their expertise and global reach to advance the circular economy of plastics. At the joint Pre-K 2022 kick-off on June 13, Borealis provided a preview of their integrated way of circular thinking and featured topics and activities at the K Fair 2022 in October. The preview covered new technologies and innovations including new packaging and infrastructure applications of the Bornewables™ portfolio of circular polyolefin products, manufactured with renewable feedstocks. New applications for Design for Recyclability, Re-Use, chemical recycling and advanced mechanical recycling were also on display.

Source:

EREMA Group GmbH

(c) plasticpreneur
Shredder, injection moulding unit and extruder
22.06.2022

EREMA Group acquires stake in start-up company plasticpreneur®

As of 30 May 2022, EREMA Group GmbH acquired 19.8 percent of plasticpreneur® gmbh. plasticpreneur® is an Austrian start-up company founded two years ago that manufactures at its production site in Klagenfurt recycling solutions for plastic waste that are mobile and can be operated without prior knowledge. The machine portfolio covers the recycling process and the production of new end-products. Due to it´s wide range of applications, it is in demand both in the Global South and in industrialised countries.

In the two years since the company was founded, plasticpreneur® has already sold 330 machines to customers in over 70 countries on all continents. In addition, they have made over 750 application-specific moulds, many of them custom-built to comply with individual customer specifications.

As of 30 May 2022, EREMA Group GmbH acquired 19.8 percent of plasticpreneur® gmbh. plasticpreneur® is an Austrian start-up company founded two years ago that manufactures at its production site in Klagenfurt recycling solutions for plastic waste that are mobile and can be operated without prior knowledge. The machine portfolio covers the recycling process and the production of new end-products. Due to it´s wide range of applications, it is in demand both in the Global South and in industrialised countries.

In the two years since the company was founded, plasticpreneur® has already sold 330 machines to customers in over 70 countries on all continents. In addition, they have made over 750 application-specific moulds, many of them custom-built to comply with individual customer specifications.

While plastics recycling has gained enormous momentum in the industrialised countries, more remote and poorer regions of the world have hardly benefited from high-tech solutions for industrial recycling processes so far. They are held back by a lack of infrastructure and know-how. That is why waste is often incinerated or disposed of in landfills, rivers and the surrounding environment. "Our mission - Another life for plastic, because we care - is also aimed at supporting these regions with solutions for plastic recycling, and with plasticpreneur® we have found the ideal partner for this," says Manfred Hackl, CEO EREMA Group.

The start-up company's machines can process HDPE, PP, PS, LDPE, PLA, AB and TPU separately. Their product range includes a shredder, injection moulding unit, extruder unit for the production of end products, air filters as well as custom-built moulds. "For our machines to be used in regions with little infrastructure, they must be easy to operate without prior knowledge. The fact that we also develop end-product solutions needed locally makes our range of services particularly attractive here," explains Sören Lex, CEO and co-founder of plasticpreneur®. As soon as recycling also becomes a source of income for the operators, they become entrepreneurs. That explains the name of the start-up, a word created from "plastic" and "entrepreneur". plasticpreneur® customers in these countries include e.g. social enterprises and operators of refugee camps, where everyday consumer goods - from clothes pegs and school supplies to toys and fence posts - are produced and sold using plastic waste. This means that the added value stays local.

The demand for plasticpreneur® machines is also increasing in industrialised countries. On the one hand by educational institutions and organisations that use them to raise awareness of the need for a circular economy in workshops and to give pupils as well as adults a better understanding of plastic recycling. On the other hand by customers who are developing new end-products for plastic waste together with plasticpreneur®. Because the machines are so easy to operate they enable a low-theshold use of recycled plastics in product development processes, starting from generating prototypes to launchin small series production. Small companies, product designers and developers therefore are another steadily growing customer segment.

Source:

EREMA Group GmbH

26.05.2022

EREMA Group: Growing revenues, plant sizes and production capacities

The EREMA Group, which comprises EREMA Group GmbH and its subsidiaries EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC, closed the 2021/22 financial year with a 17 percent increase in revenue. Consolidated Group revenue amounted to EUR 295 million, and the number of employees increased to over 840. The EREMA Group remains on course for continued growth.

A closer look at the post consumer segment clearly shows a trend towards larger plants, both for PET recycling and for processing polyolefins. For example, the first VACUREMA® Basic 2628 T machine with an annual capacity of up to 40,000 tonnes was recently commissioned at a customer's site in Brazil. This plant features a ten-meter-long special geometry screw with a diameter of 280 millimetres and a weight of 3.5 tonnes. The screw was developed and manufactured by 3S, a subsidiary of EREMA GmbH.

The EREMA Group, which comprises EREMA Group GmbH and its subsidiaries EREMA, PURE LOOP, UMAC, 3S, KEYCYCLE and PLASMAC, closed the 2021/22 financial year with a 17 percent increase in revenue. Consolidated Group revenue amounted to EUR 295 million, and the number of employees increased to over 840. The EREMA Group remains on course for continued growth.

A closer look at the post consumer segment clearly shows a trend towards larger plants, both for PET recycling and for processing polyolefins. For example, the first VACUREMA® Basic 2628 T machine with an annual capacity of up to 40,000 tonnes was recently commissioned at a customer's site in Brazil. This plant features a ten-meter-long special geometry screw with a diameter of 280 millimetres and a weight of 3.5 tonnes. The screw was developed and manufactured by 3S, a subsidiary of EREMA GmbH.

Demand for previously-owned machines at UMAC also remained high during the past financial year. In addition to the general trend towards plastics recycling, the decisive factor here is that customers are more frequently opting for previously-owned systems available at short notice due to the tense situation on the procurement markets. At the same time, businesses that have so far had little contact with recycling are also becoming increasingly interested in this topic. Their need for feasibility studies, consulting and engineering services, project management and turnkey projects are now also very successfully catered for by KEYCYCLE, an EREMA Group company. KEYCYCLE has also acquired from Cadel Deinking the patent, technology and distribution rights for an innovative ink removal technology, which is now being further developed using the know-how of the EREMA Group and shaped into a product that meets industrial standards.

The initiative launched four years ago to modernise and expand existing EREMA Group sites was continued during the past financial year with the expansion and construction of a dedicated machine demonstration centre for PLASMAC in Milan. Equipped with additional production floor space and new and enlarged customer centres, all companies within the group are now well prepared to meet rising demand, and with the new research and development centre under construction in Ansfelden, the framework for further outstanding plastics recycling milestones from EREMA is currently being optimised.

Source:

EREMA Group GmbH

Photo: Erema
07.04.2022

EREMA: New R&D centre for innovative recycling technologies

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

Construction machinery rolls into action again. The ground-breaking ceremony at the EREMA site in Ansfelden on April, 6 signals the start of work on a new R&D centre. Two halls with a total area of 1,550 square metres and a new office building with 50 workplaces will be built. The R&D centre will offer cross-departmental and cross-company test machines and laboratory for research and development of plastics recycling technologies to further advance the circular economy. Completion is scheduled for February 2023.

Plastics recycling is currently evolving very rapidly from a niche to a trend. This is driven by the legislative targets for plastics recycling that the European Union and many countries around the world have enacted, as well as by the European Green Deal, which aims to make Europe the first climate-neutral continent and in which the circular economy plays a very central role.

However, there is not just one recycling solution for all types of plastic waste, but rather different solutions depending on the type of plastic, the product and the application intended for the recycled plastic. While some plastics processing loops, such as for PET bottles, have already been closed, many other plastic waste streams still require a great deal of R&D in cooperation with everyone involved in the value chain to produce recycled pellets that meet the very highest standards for the production of new products. More space will be available for this in the new centre.

R&D is decentralised at EREMA. In recent years, approximately 5 percent of turnover was reinvested annually in research and development. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology, and special technologies with a view to further improving the quality of recycled pellets. They also focus on new recycling technologies for waste plastic materials for which there is currently no satisfactory circular economy solution. The decisive factor here is also to exploit the potential of digitalisation. By collecting and analysing machine data, not only can recycling processes and product quality be further improved, but we can also develop our digital service offering for our customers. Such offerings include customer-specific information tools that feature plant and process data, predictive maintenance and online support as well as commissioning via remote access.

For material tests, which are necessary for research and development work, an expanded machine park will be available following completion of the new R&D centre. Here, the recycling process can be evaluated end-to-end, including upstream and downstream processes such as shredding and further processing of the recycled pellets. The material tests are supported by detailed analysis in the professionally equipped laboratory, which will be relocated to the new premises and upgraded where necessary with the very latest lab equipment.

More information:
EREMA plastics recycling
Source:

EREMA Engineering Recycling Maschinen und Anlagen GmbH

Georg Wendelin Foto: privat
Georg Wendelin
05.04.2022

EREMA mourns the passing of company co-founder Georg Wendelin

The EREMA Group mourns the passing of Georg Wendelin, company co-founder, former Managing Partner and long-time Chairman of the Supervisory Board of EREMA Group GmbH, who died on the 29th of March at the age of 84.

In 1983, at a time when plastics recycling was hardly an issue, Georg Wendelin, together with Helmut Bacher and Helmuth Schulz, laid the corner stone for the group of companies that today is a world market leader by founding the company and building the first EREMA plastics recycling machine. With pioneering spirit, a business acumen and his respectful and appreciative management style, Georg Wendelin actively shaped the success of the company, attentively and proudly keeping track of how plastics recycling went from being a niche to a trend and how the EREMA Group became a driving force behind the circular economy. In 2019, he was awarded the Golden Decoration of the Republic of Austria in recognition of his work.

The EREMA Group mourns the passing of Georg Wendelin, company co-founder, former Managing Partner and long-time Chairman of the Supervisory Board of EREMA Group GmbH, who died on the 29th of March at the age of 84.

In 1983, at a time when plastics recycling was hardly an issue, Georg Wendelin, together with Helmut Bacher and Helmuth Schulz, laid the corner stone for the group of companies that today is a world market leader by founding the company and building the first EREMA plastics recycling machine. With pioneering spirit, a business acumen and his respectful and appreciative management style, Georg Wendelin actively shaped the success of the company, attentively and proudly keeping track of how plastics recycling went from being a niche to a trend and how the EREMA Group became a driving force behind the circular economy. In 2019, he was awarded the Golden Decoration of the Republic of Austria in recognition of his work.

"We will greatly miss Georg Wendelin as a personality who was closely associated with us for all these years. Because of his humanity, he was a highly respected figure of leadership on all sides," said Manfred Hackl, CEO of EREMA Group GmbH and himself a long-time companion of Wendelin's.

More information:
EREMA Georg Wendelin
Source:

EREMA Group GmbH

(c) EREMA Group GmbH
17.03.2022

EREMA: Working together with Recycling Company Anviplas

The Spanish recycling company Anviplas has been involved in plastics recycling for more than 30 years, during which time it has built up extensive know-how that now benefits customers throughout Europe, in Africa and in Asia. Their cooperation with EREMA is almost as long. Since 1991, Anviplas has relied on the technology and service provided by the Austrian recycling machine manufacturer.

The Spanish recycling company Anviplas has been involved in plastics recycling for more than 30 years, during which time it has built up extensive know-how that now benefits customers throughout Europe, in Africa and in Asia. Their cooperation with EREMA is almost as long. Since 1991, Anviplas has relied on the technology and service provided by the Austrian recycling machine manufacturer.

Employing 64 people, Anviplas recycles post-industrial and post-consumer plastic waste, especially HD and LD-PE as well as PP, to make recycled pellets in all colour variations. The production capacity is 1,800 tonnes per month. An EREMA type INTAREMA® 1716 TVEplus® recycling machine with screen changer is in operation at the site in Navarcles (Barcelona) for processing the PP material stream. This patented extruder system was developed for handling difficult-to-process materials, such as heavily printed films as well as very moist waste. This machine is characterised by its optimised 3-stage degassing system; firstly by preheating and predrying the material in the preconditioning unit, secondly because the screw design allows reverse degassing, and thirdly in the degassing zone of the extruder.

Anviplas customers manufacture a huge bandwidth of products made using their recycled pellets. They range from various film products, such as stretch, shrink, mulch and silage films, to irrigation, corrugated and high-pressure pipes, as well as containers such as tubs, bottles, barrels and crates.

In February 2022 the Repeats Group, a pan-European platform for LDPE recycling, and Anviplas announced, that Repeats has made an investment in the Spanish recycling company. For Repeats this investment in Anviplas represents an important step in building a pan-European plastics recycling platform.

More information:
EREMA Recycling plastics Anviplas
Source:

EREMA Group GmbH

(c) EREMA GmbH
15.12.2021

EREMA: Large-scale recycling Plants for production capacity up to 40,000 tonnes per year

As the demand for recycled plastics grows, so does the size of the machines. This applies to the processing of polyolefins as well as to PET recycling. With its unique dimensions and production capacity, this new size of plant features a screw diameter of 280 mm, implemented for the first time in a VACUREMA® Basic 2628 T large-scale project for producing rPET pellets. EREMA has just shipped the plant to a customer in Brazil.

As the demand for recycled plastics grows, so does the size of the machines. This applies to the processing of polyolefins as well as to PET recycling. With its unique dimensions and production capacity, this new size of plant features a screw diameter of 280 mm, implemented for the first time in a VACUREMA® Basic 2628 T large-scale project for producing rPET pellets. EREMA has just shipped the plant to a customer in Brazil.

Up to 40,000 tonnes per year of rPET meeting the highest quality standards can now be produced. "For this purpose, we installed a screw with a length of ten meters, a diameter of 280 millimetres and a weight of 3.5 tonnes, which is the largest ever used in one of our recycling machines," explains Managing Director Michael Heitzinger. The screw was manufactured by 3S, a subsidiary of EREMA GmbH. No less impressive is the reactor of this recycling system, which, with a height of around 10 metres, is also unique and almost reaches the roof of the new production hall. 500 tonnes of input material were recycled during the test phase, which was subject to strict quality control. "The entire project was a great team effort," Heitzinger said, thanking everyone involved.

EREMA as a partner for large-scale projects
Just four years ago, the largest extrusion line supplied by EREMA was designed for a throughput of 15,000 tonnes per year. This size of plant was ordered by customers once or twice a year. In the meantime, machines like this leave the production site in Ansfelden every month. As early as 2020, EREMA proved to be a pioneer and reliable partner for implementing unique large-scale projects. That was when the food and beverage packaging manufacturer Envases Universales Mexico commissioned two VACUREMA® Basic 2625 T machines, each with a screw diameter of 250 mm and a capacity of 30,000 tonnes per year.

Source:

EREMA GmbH

(c) AMUT/EREMA
02.12.2021

AMUT/EREMA: From PET bottles straight to food contact grade r-PET packaging

AMUT’s strategic partnership with EREMA contributes to accelerate the transition towards a greener world.  In summer 2021, EREMA in collaboration with AMUT  has finalized the installation and commissioning of ALTO packaging ́s first extrusion line for food grade PET sheets in New Zealand market. At the ALTO Plastic Packaging site, in Albany, the plant now processes 100 % washed post-
consumer flakes into 100 % food contact grade monolayer thermoforming sheet. In New Zealand, this milestone represents the first system to be installed for this special application.

The plastic packaging company ALTO, a division of PACT Group, invested for this new food grade PET sheet extrusion line as a part of Pact Group ́s vision to lead Circular Economy through Packaging in Australia and New Zealand.

AMUT’s strategic partnership with EREMA contributes to accelerate the transition towards a greener world.  In summer 2021, EREMA in collaboration with AMUT  has finalized the installation and commissioning of ALTO packaging ́s first extrusion line for food grade PET sheets in New Zealand market. At the ALTO Plastic Packaging site, in Albany, the plant now processes 100 % washed post-
consumer flakes into 100 % food contact grade monolayer thermoforming sheet. In New Zealand, this milestone represents the first system to be installed for this special application.

The plastic packaging company ALTO, a division of PACT Group, invested for this new food grade PET sheet extrusion line as a part of Pact Group ́s vision to lead Circular Economy through Packaging in Australia and New Zealand.

Thanks to the direct combination of VACUREMA® PET recycling technology and the AMUT Inline Sheet production technology there is no longer any extra process stage. This is, because the melt goes straight from the VACUREMA® 1716 T Basic to the AMUT plant without the detour of pelletising. The post-consumer PET material is already decontaminated and pre-dried prior to extrusion in the vacuum reactor of the VACUREMA® Basic, with a throughput of up to 1,500 kg per hour. After high capacity filtration by EREMA SW-RTF backflush filter and online IV measurement, the melt goes directly into the AMUT Inline Sheet plant where it is processed into thermoforming sheet from 0.15 mm till 1.2 mm thickness. The monolayer thermoforming sheet produced from pure rPET is not only 100 % food contact compliant, it also fulfils the FDA and further regulations. At ALTO it is further processed into trays and food containers.

AMUT played its part by providing a full range of downstream equipment ranging from the Automatic Tdie, three rolls stack calender with automatic gap control and motorized cross axing unit, lamination unit for welding and barrier films, thickness control gauge to anti-static silicon coating unit, fully automatic two shafts turret winder and in line edge trims grinding and recycling.

The special features of this extrusion line come from the complete automatic and easy management of the line. This is due to the new Amut`s software including the Easy Start and Easy Change functions that will allow the operator to start the extrusion line and change product formats in automatic mode.

EREMA and AMUT are long-term partners in the Inline Sheet sector. EREMA ́s VACUREMA® technology is currently in use in more than 100 Inline Sheet facilities around the world, also for PACT Group companies in Australia. 

More information:
AMUT EREMA PET plastics Recycling
Source:

EREMA Group GmbH

(c) EREMA Group GmbH
11.11.2021

EREMA awarded for the Recycling Machinery Innovation of the Year

EREMA is winner at this year´s Plastics Recycling Awards Europe. At the award ceremony as part of the Plastics Recycling Show Europe at 5th November in Amsterdam, EREMA was awarded for its recycling system INTAREMA® TVEplus® RegrindPro® + ReFresher in the category Recycling Machinery Innovation of the Year. Thanks to the combination of its recycling machine with the ReFresher technology that reduces odour downstream of the extrusion process, EREMA has enabled the PCR-HDPE produced with it to be used in proportions of up to 100 percent for the production of packaging for direct contact with food and beverages, as confirmed by the U.S. Food and Drug Administration (FDA).

The judges recongised this innovation as a step change in eliminating unwanted odour from waste plastics, allowing recyclate to replace virgin palstics in high end applications. This type of innovation is essential for meeting EU targets for recycled content of food contact plastics.
The market also confirms awarding this technology. By the end of 2021, EREMA customers will produce 450,000 tonnes of high-quality, odor-optimized regranulate per year, with it.

EREMA is winner at this year´s Plastics Recycling Awards Europe. At the award ceremony as part of the Plastics Recycling Show Europe at 5th November in Amsterdam, EREMA was awarded for its recycling system INTAREMA® TVEplus® RegrindPro® + ReFresher in the category Recycling Machinery Innovation of the Year. Thanks to the combination of its recycling machine with the ReFresher technology that reduces odour downstream of the extrusion process, EREMA has enabled the PCR-HDPE produced with it to be used in proportions of up to 100 percent for the production of packaging for direct contact with food and beverages, as confirmed by the U.S. Food and Drug Administration (FDA).

The judges recongised this innovation as a step change in eliminating unwanted odour from waste plastics, allowing recyclate to replace virgin palstics in high end applications. This type of innovation is essential for meeting EU targets for recycled content of food contact plastics.
The market also confirms awarding this technology. By the end of 2021, EREMA customers will produce 450,000 tonnes of high-quality, odor-optimized regranulate per year, with it.

More information:
EREMA Recycling
Source:

EREMA Group GmbH