From the Sector

Reset
6 results
ECO-COAT minimum application unit (c) Brückner
Minimalauftragsaggregat ECO-COAT
02.06.2022

BRÜCKNER: Answering current challenges of the textile industry

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The German machinery producer BRÜCKNER used exactly these chances and repositioned itself during the pandemic period. For more than 70 years, the family-run company has been specialized in individual finishing concepts for textiles, technical textiles, nonwovens and floor coverings. The current challenges in the textile industry are serious. The clear increase of the energy costs and the general uncertainty of the energy supply as well as political requirements make a profitable textile production more and more demanding for many companies.

The company responds to this with a newly developed stenter concept with double heating system. Depending on availability, the lines can be operated with gas or oil, but also other combinations with steam or renewable energies are possible. This means that production delays and machine downtimes can be avoided as far as possible. In addition, developed intelligent assistance systems for its machines have been developed that support the machine operator in using the best possible process to operate the line as energy-efficiently as possible. Further energy savings are possible with new energy-efficient motors or heat-recovery and exhaust air cleaning systems. This also helps to avoid harmful emissions.

But many textile producers are also focusing on reducing chemicals. For this purpose, BRÜCKNER's further developed ECO-COAT minimum application unit can make a decisive contribution. Knitted and woven fabrics, but also nonwovens can be finished on one or both sides via different fabric paths. With the minimum application via an engraved roller, a single-sided application of up to 100 g/m² can be achieved. A double-sided and higher application quantity is achieved, for example, by impregnation in the nip. Irrespective of the selected fabric path, a very small liquor reservoir means that only minimal quantities of waste water are produced when changing batches or liquors, and the use of chemicals can also be significantly reduced. In addition, less water has to be evaporated in the subsequent drying process than, for example, in the case of impregnation in a water bath, so the energy requirement is significantly reduced.

On the two upcoming trade fairs ITM in Istanbul and TECHTEXTIL in Frankfurt in June, interested customers can personally get an idea of BRÜCKNER's new developments.

Source:

Brückner Trockentechnik GmbH & Co. KG

Techtextil and Texprocess 2022: registration now open (c) Messe Frankfurt
08.06.2021

Techtextil and Texprocess 2022: registration now open

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022.

  • The Techtextil and Texprocess trade fairs have a positive view of the future and invite the sector to take part at Frankfurt Fair and Exhibition Centre from 21 to 24 June 2022.
  • Exhibitors who register well in advance benefit from an early-booking discount.

The dates for the next editions of Techtextil and Texprocess have been set and the leading international trade fairs for technical textiles and nonwovens and for the processing of textile and flexible materials are set to attract exhibitors and trade visitors from all over the world to Frankfurt am Main from 21 to 24 June 2022. Thus, the fairs are shifting the biennial cycle of events from odd to even years, which fits in perfectly with the sector’s international event calendar. Companies that book exhibition space at one of the two trade fairs no later than 31 August 2021 benefit from an early booking discount. “We see the future in a positive light and are confident that we will finally be able to give the sector the opportunity to meet and exchange ideas and information in June 2022. The desire for personal encounters, direct communication and new impressions is growing from day to day”, says Olaf Schmidt, Vice President Textiles and Textile Technologies.

Elgar Straub, Managing Director, VDMA Textile Care, Fabric and Leather Technologies, emphasises that, “Texprocess and Techtextil are the world’s foremost trade fairs for our innovative sector by a large margin. Both events offer customers an unrivalled overview of state-of-the-art innovations and technological developments – and beyond. Particularly when it comes to the latest trends for sustainability and digitalisation, Texprocess and Techtextil in Frankfurt represent the most important, future-oriented market. This makes it all the more important for both the exhibitor and visitor sides of the sector that we have the opportunity to obtain an overview of the latest market developments, to exchange ideas and information and to initiate new business. We are very relieved about this and hope that, next year, we will once again have the chance to generate new momentum for our sector in the international market.”

For the first time, Techtextil and Texprocess will occupy the western sector of Frankfurt Fair and Exhibition Centre with a total of four exhibition halls and, with a hybrid format, offer the best of both the physical and immaterial worlds: personal communication, virtual networking opportunities and maximum digital coverage. With a comprehensive hygiene and safety concept, Messe Frankfurt will ensure that all visitors and exhibitors can take part safely and with a good feeling.

Source:

Messe Frankfurt

HIGHTEX Trade Fair postponed to 14-18 June 2022 (c) ITM
15.03.2021

HIGHTEX Trade Fair postponed to 14-18 June 2022

HIGHTEX International Technical Textiles and Nonwoven Trade Fair, which is planned to be held on June 22-26, 2021 was decided to postpone to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with our participants and sector representatives.

The HIGHTEX Organization Team made the following statements: “We as HIGHTEX Organization Team, our priority is to protect your valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the HIGTEX Exhibition justified and will understand.”

HIGHTEX 2022, which will be held in Istanbul Tuyap Fair and Congress Center between 14- 18 June 2022, simultaneously with the ITM 2022 Exhibition.

HIGHTEX International Technical Textiles and Nonwoven Trade Fair, which is planned to be held on June 22-26, 2021 was decided to postpone to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with our participants and sector representatives.

The HIGHTEX Organization Team made the following statements: “We as HIGHTEX Organization Team, our priority is to protect your valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the HIGTEX Exhibition justified and will understand.”

HIGHTEX 2022, which will be held in Istanbul Tuyap Fair and Congress Center between 14- 18 June 2022, simultaneously with the ITM 2022 Exhibition.

HIGHTEX 2022 being the first and only exhibition in its field in Turkey will host the world's leading technical textile and nonwoven manufacturers in Istanbul for 5 days.
HIGHTEX 2022, where many companies from Turkey and abroad will exhibit their latest technologies and products; will be visited by many industry professionals from medical to ready-to-wear, from decoration to cosmetics, from automotive to defense.

Source:

HIGHTEX

Turkish textile manufacturers wait for ITM 2021 Exhibition (c) ITM
10.12.2020

Turkish textile manufacturers wait for ITM 2021 Exhibition to expand their investments

The Turkish textile industry, which continues its exports and investments without slowing down despite the devastating pandemic, once again proved its strength, especially in this period. ITM 2021 Exhibition, which will be held in Istanbul between 22 and 26 June 2021, will provide a great advantage to companies that desire to expand their investments and introduce their brand new technologies.

The Turkish textile industry, which continues its exports and investments without slowing down despite the devastating pandemic, once again proved its strength, especially in this period. ITM 2021 Exhibition, which will be held in Istanbul between 22 and 26 June 2021, will provide a great advantage to companies that desire to expand their investments and introduce their brand new technologies.

Although there were slowdowns in the textile industry in April and May this year due to the troublesome coronavirus pandemic , the Turkish textile industry succeeded a big breakthrough with the removal of restrictions in June, thanks to both its textile production infrastructure and international exports capacity. The exports of the textile and raw materials sector increased and the companies turned to new investments. While many local companies enlarged their facilities, some of them made new investment decisions. For example, while a giant hygienic and medical fabric production facility was invested in Çorlu, another Turkish company, a global brand in textile machinery production, decided to invest 40 million Turkish Lira. Gaziantep-based spunbond and meltblown nonwoven manufacturer company added two new meltblown lines to its operations. Another company also began to invest in the production of raw materials that they import. This investment activity in Turkey, where is a manufacturing base of European customers whet the appetite of international investors. One of South Korea's largest conglomerates has rolled up its sleeves for an investment of 430 million US Dollars in Çerkezköy. Due to the investments, the purchase of textile machinery increased by 37.1 percent in the first nine months of 2020 amounting to over 1 billion US Dollars.

The Accurate Address for Investment Decisions: ITM 2021 Exhibition
Although the companies took advantage of the pandemic period as an opportunity and continued their investments, many of them are waiting for the ITM 2021 Exhibition for large machinery purchases. ITM 2021 Exhibition, which will be held between 22 and 26 June 2021 at Istanbul Tüyap Fair and Congress Center, will gather thousands of participating companies and visitors under one roof. The company officials, who will have the opportunity to observe the latest technological products to be exhibited by the international and domestic exhibitors, will direct their investments by meeting with the experts of the sector. The machines produced for technical textiles, which became even more important during the devastating pandemic period, will attract the attention of visitors. Thanks to the machinery purchases and business partnerships of both domestic and international companies, there will be great dynamism in the textile industry and the national economy.

Source:

ITM

 The BCF S8 sets new standards with regards to color separation. (c) Oerlikon Manmade Fibers
The BCF S8 sets new standards with regards to color separation.
30.01.2020

Egy Stitch & Tex 2020: Oerlikon Manmade Fibers Focuses on Carpet yarns

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The Oerlikon Manmade Fibers segment will be presenting itself at the Egy Stitch & Tex 2020 between March 5 and 8, 2020 in Cairo – with a clear focus on the needs of the African market. In Hall 1, Stand B2 The Oerlikon Barmag and Oerlikon Neumag experts will also be showcasing the comprehensive product and service portfolio of the world market leader for manmade fiber systems at the stand of Oerlikon’s representative ATAG Export & Import.

The spotlight of the Oerlikon Manmade Fibers segment’s trade fair attendance will be on two core technologies: the new generation of Oerlikon Barmag eAFK Evo texturing machines is to be unveiled within the African market for the very first time. It promises higher speeds and productivity with consistently high product quality, along with lower energy consumption and simpler operation vis-à-vis comparable market solutions. In particular, the numerous value-added features include two that convince with cutting-edge technology: the optimized, innovative EvoHeater and the EvoCooler, a completely newly-developed active cooling unit.

The second technology focus offers new opportunities for the Egyptian market and the Middle Eastern markets in particular: with Oerlikon Neumag’s BCF S8 monocolor and tricolor system, the segment will be unveiling its new carpet yarn production flagship. Superlative spinning speeds, up to 700 individual filaments, finer titers of up to 2.5 dpf – the performance data and technological finesse of the new system have already made a huge impression at numerous trade fairs and roadshows over the past year. The tricolor’s core component is the new, patent-pending Color Pop Compacting unit (CPC-T) for even more flexible and more even color separation. With the CPC-T, individually-controllable air pressures for each color provide pre-tangling, which accentuates the colors and hence makes more than 200,000 different shades possible. Whereas it has been very difficult to manufacture strongly color-separated or color-accentuated BCF yarns from polyamide 6 to date, this will in future be possible thanks to the CPC-T system. As a result of the new design, the CPC-T is now also suitable for processes with low yarn tensions.
 
Expanded product offering for manufacturing carpet yarns
Know-how covering all relevant technologies deployed in manmade fiber spinning plants enables Oerlikon – as the world’s only manufacturer – to expand its range of products and services for making carpet yarns. The POY- and texturing-based system concept is designed for a carpet and home textiles segment that demands particularly soft and bulky polyester yarns with BCF-like properties. Here, the aim is to produce yarns with titers of max. 1300dtex and typically more than 1,000 filaments, with typical products including, for example, 1300dtex f1152, 660dtex f1152 and 990dtex f768. The machine concept comprises the well-known WINGS HD POY winder, along with the eAFK Big-V texturing machine.

 

Source:

Oerlikon Manmade Fibers

Green products to be centre stage at October’s Yarn Expo Autumn ©Messe Frankfurt
Logo Yarn Expo
08.09.2017

Green products to be centre stage at October’s Yarn Expo Autumn

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

  • Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products
  • Six special display zones cater to latest industry trends

Green products continue to be sought after more and more by consumers nowadays, and textiles are no exception. In order to promote sustainable development throughout the industry, a number of yarn and fibre manufacturers have endeavoured to introduce green products into the early stages of textile production, and Yarn Expo, as the leading yarn and fibre business platform in Asia, serves as an ideal stage for these suppliers to gain exposure to buyers looking for such products.

Debut BCI Pavilion joined by Sateri and Birla Planet Pavilions to showcase eco-friendly products

Amongst a record number of exhibitors at this October’s Yarn Expo Autumn, the debut BCI Pavilion as well as the Sateri Pavilion and Birla Planet Pavilion that include eco-friendly products are certainly amongst the highlights this year. Better Cotton Initiative (BCI) is a global organisation with more than 1,000 members including spinners, weavers and garment manufacturers throughout the entire cotton sector. It aims to promote sustainable cotton production, benefiting workers, customers and the environment as a whole. They will form the BCI Pavilion in Yarn Expo for the first time, with five spinners showcasing their cotton yarn manufactured with eco-friendly cotton.

Sateri is a well-known brand in China which specialises in viscose rayon. This natural and high-quality fibre is made from trees grown on renewable plantations. They are the largest producer of viscose fibre in China with three mills and an annual capacity of 550,000 tons, and also have Oeko-Tex certification. This October, nine other domestic exhibitors will form the Sateri Pavilion to demonstrate their comfortable textiles and skin-friendly hygiene products made from viscose fibre.

With over 50 years of experience in manufacturing cellulosic fibres, Birla Group strives to provide greener, purer and safer products to its customers. The Group has operated in China for three years now, and values Yarn Expo’s effectiveness in helping them to promote their brand and attract a wide range of buyers. “We managed to get connected with a number of downstream buyers at the fair. We have introduced our company and products to them that there is great chance for future cooperation.” said Mr Peter Dong, Senior Manager of Aditya Birla Group.   Coming back this year, the Birla Planet Pavilion will feature three of their highlighted fibres – Birla Viscose, Birla Modal and Birla Spunshades at the fair.

Six special display zones cater to latest industry trends

The textile industry in China is undergoing a structural change with keen competition, so domestic suppliers have to develop innovative and quality products to satisfy the ever-changing markets. To match the specific needs of various buyers, Yarn Expo has established six distinct display zones gathering the leading domestic companies, namely Colourful Chemical Zone, Natural Cotton Yarn Zone, Fancy Yarn Zone, Quality Wool Zone, Green Linen Zone and e-Commerce Zone.

Not only are a number of chemical fibre products with innovative, eco-friendly and health & comfort properties on offer from exhibitors, but visitors can also gain insights into product trends in these areas from the 2017/18 China Fibre Trend Area and Innovative Textile Material Forum, both of which feature in the Colourful Chemical Zone. The Natural Cotton Yarn Zone is another highlight of the three-day show, where exhibitors will showcase their natural cotton yarn and a range of functional products. Around 50 suppliers will also showcase their latest collections in the expanded Fancy Yarn Zone.
In response to the strong demand for fibre and yarn products in China and the Asian region, the coming autumn edition of Yarn Expo will double its exhibition space, and will accommodate around 500 global yarn suppliers from 13 countries and regions. Together with Yarn Expo Autumn 2017, three other textile trade fairs are held concurrently from 11 – 13 October in the same venue: Intertextile Shanghai Apparel Fabrics – Autumn Edition, PH Value and the China International Fashion Fair (CHIC).

Yarn Expo Autumn is organised by Messe Frankfurt (HK) Ltd; The Sub-Council of Textile Industry, CCPIT; China Cotton Textile Association; China Wool Textile Association; China Chemical Fiber Association; China Bast & Leaf Fibres Textiles Association; and China Textile Information Centre.