From the Sector

Reset
224 results
(c) Notus Composites. Notus NE7 low temperature curing prepreg
15.09.2021

Notus Composites Launches New Low Temperature Curing NE7 Epoxy Prepreg

Notus Composites (UAE), the award-winning producer of epoxy prepreg materials, announces the latest addition to its high-performance epoxy range with the launch of its new NE7 low temperature curing prepreg system. The Notus NE7 formulation allows composite manufacturers to cure components at temperatures as low as 70˚C, reducing energy consumption and enabling more cost-effective tooling options.

Notus Composites has developed the new NE7 prepreg systems for applications across the Marine, Architecture, Industrial and Wind Energy sectors, with the novel low temperature curing chemistry delivery significant cost benefits. Existing prepreg manufacturers can now use more cost-effective composite tooling, with new prepreg users able to switch easily from existing infusion or wet laminating processes without creating expensive new high temperature tooling.

Notus Composites (UAE), the award-winning producer of epoxy prepreg materials, announces the latest addition to its high-performance epoxy range with the launch of its new NE7 low temperature curing prepreg system. The Notus NE7 formulation allows composite manufacturers to cure components at temperatures as low as 70˚C, reducing energy consumption and enabling more cost-effective tooling options.

Notus Composites has developed the new NE7 prepreg systems for applications across the Marine, Architecture, Industrial and Wind Energy sectors, with the novel low temperature curing chemistry delivery significant cost benefits. Existing prepreg manufacturers can now use more cost-effective composite tooling, with new prepreg users able to switch easily from existing infusion or wet laminating processes without creating expensive new high temperature tooling.

NE7 prepregs can be cured at temperatures as low as 70˚C, with the standard cure cycle being 12 hours at 70˚C, matching the typical cycle time for an infused part with a component Tg of 85˚C. NE7 materials have a good outlife of 30 days at 20˚C and are available in all prepreg and Notus single sided N1-Preg formats with unidirectional, multiaxial, and woven reinforcements. NE7 can also be supplied as a resin film.

Notus has recently supplied NE7 low temperature prepregs to Dubai based Aeolos Composites for the production of their new Aeolos P30 racing yacht. The P30 is a futuristic new craft created by top German sailor and designer, Hans Genthe, with a super light carbon fibre construction and large sail area that promises spectacular on the water performance for a thirty foot yacht. Notus delivered a range NE7 prepregs for the build, including woven, multiaxial, and unidirectional carbon fibre reinforcements as well as adhesive films for core bonding.

More information:
Notus prepreg material
Source:

Notus Composites.

Bemberg™ by Asahi Kasei at Filo to unveil its smart DNA story that meet contemporary consumer needs (c) Bemberg™
Waxewul proposal using Bemberg™.
15.09.2021

Bemberg™ by Asahi Kasei at Filo to unveil its smart DNA story that meet contemporary consumer needs

  • FILO, 29th-30th September 2021, booth C5

Bemberg™ by Asahi Kasei has been invited to showcase at Filo fair, the international exhibition of orthogonal weaving yarns for clothing and furnishings, circular knitwear and technical textiles, in a new special area, a dedicated open space reserved to sustainable fibers that will allow visitors to discover all their production cycle and performances, in full relax and transparency.

Bemberg™, an exceptional fiber made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, will brings to Filo its history, experience, know-how and market partnerships to prove its versatility and design-driven look and touch Last but not least we are talking about a true circular economy-oriented ingredient, with certified sustainable performance: Bemberg™ is biodegradable and compostable material as verified by the INNOVHUB 3rd party test and it has GRS (Global Reycled Standard) certification from Textile Exchange proving recycling authenticity.

  • FILO, 29th-30th September 2021, booth C5

Bemberg™ by Asahi Kasei has been invited to showcase at Filo fair, the international exhibition of orthogonal weaving yarns for clothing and furnishings, circular knitwear and technical textiles, in a new special area, a dedicated open space reserved to sustainable fibers that will allow visitors to discover all their production cycle and performances, in full relax and transparency.

Bemberg™, an exceptional fiber made from the smart-tech transformation of cotton linters pre-consumer materials and converted through a traceable and transparent closed loop process, will brings to Filo its history, experience, know-how and market partnerships to prove its versatility and design-driven look and touch Last but not least we are talking about a true circular economy-oriented ingredient, with certified sustainable performance: Bemberg™ is biodegradable and compostable material as verified by the INNOVHUB 3rd party test and it has GRS (Global Reycled Standard) certification from Textile Exchange proving recycling authenticity.

Bemberg™ application history starts with high-quality suit lining, but today we can find it in many other applications such as fashion couture, outerwear, innerwear, bedding, and sportswear where its amazing unique touch and quality is offering a distinctive performance.

And to prove all of this, Bemberg™ will be at Filo showing some selected fabric innovation, and three responsible-driven designers representing different and complementary part of contemporary consumer wardrobe: ZEROBARRACENTO, Maurizio Miri and WAXEWUL - who have all chosen Bemberg™ fiber to create special collections. Three different ways to see and represent how sustainability and style – even if completely different ones – together can be highly successful, performing and interesting to the new consumer.

ZEROBARRACENTO, a gender-neutral emerging outerwear brand focusing on zero-waste product development, selects Bemberg™ for two fundamental reasons: firstly, from a stylistic point of view for its extreme versatility: in the various collections we have adopted it to create Kimonos, padded jackets, wrap dresses as well as for the interiors of our garments, which are intended to be soft embraces for total physical and mental comfort. The second but no less important reason is that this fibre has circular values in line with their zero-waste commitment.

The concept of the brand "Maurizio Miri" has a strong personality and a clear intent: to create a product that stimulates the wearer towards beauty. A garment should not simply be worn, but it has also to create a perfect symbiosis with the person wearing it and generate an exchange of positive energies. The purpose is to make the individual feel in perfect harmony with their own image. With this aim in mind, the designer selects extremely precious Bemberg™ linings for their sophisticated tailor jackets. 

Finally, WAXEWUL, a brand of sartorial clothing and artisan accessories with an urban-afro soul that has environmental and social sustainability as its basic ethics. WAXEWUL will bring to Filo its brand-new product, the J_Hood Bag: a doubleface jacket with a comfortably removable hood that can be transformed into a finely hidden doubleface bag. An exclusive, innovative and sustainable garment with minimal impact on the environment made of BemBAZIN™ - a new generation of bazin created, patented and produced by Brunello which is composed by the high-tech and responsible fibers of Bemberg™ - on one side and of wax on the other, traceable and certified, guaranteeing a reduction in waste (two jackets in one) and a long-life cycle.

(c) INDA, the Association of the Nonwoven Fabrics Industry
07.09.2021

INDA Announces the 2021 RISE® Innovation Award Finalists

  • Innovations in Protection, Efficiency and Engineered Fabrics

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the prestigious RISE® Innovation Award during the 11th edition of the Research, Innovation & Science for Engineered Fabrics Conference, (RISE®) to be held virtually September 28-30, 2021.  The award recognizes novel innovations in the nonwovens industry that creatively use next-level science and engineering principles to solve material challenges and expand the usage of nonwovens and engineered fabrics. These three finalists will present their innovative material science solutions as they compete for the RISE® Innovation Award.

  • Innovations in Protection, Efficiency and Engineered Fabrics

INDA, the Association of the Nonwoven Fabrics Industry, announced the three finalists for the prestigious RISE® Innovation Award during the 11th edition of the Research, Innovation & Science for Engineered Fabrics Conference, (RISE®) to be held virtually September 28-30, 2021.  The award recognizes novel innovations in the nonwovens industry that creatively use next-level science and engineering principles to solve material challenges and expand the usage of nonwovens and engineered fabrics. These three finalists will present their innovative material science solutions as they compete for the RISE® Innovation Award.

Canopy Respirator
Canopy is an innovative respirator that is fully mechanical, non-electrostatic, with a filter designed for superior breathability while offering the wearer facial transparency. The breakthrough respirator features 5.5mm water column resistance at 85 liters (3 cubic feet) per minute, 2-way filtration, and a pleated filter that contains over 500 square centimeters of surface area. The patented Canopy respirator resists fluids, and eliminates fogging of eyeglasses.  

Evalith® 1000 Series
Johns Manville’s innovative Alpha Binder is a formaldehyde-free, high bio-carbon content, toxic-free binder formulation ideal for carpet mat applications. Alpha Binder eliminates monomer and polymer synthesis, uses a bio-degradable catalyst, and requires 70% less water in manufacturing. The resulting glass mats made of Alpha Binder are named “Evalith 1000” and reduces energy consumption during manufacturing by over 70% compared to alternative petroleum-based binders. Evalith 1000 was commercialized in North America in 2020.

Fiber Coated, Heat Sealable, Breathable, Hybrid Membrane, Fabric Protection
TiGUARD protective fabric is a construction of monolithic or hybrid imperious/moisture eliminating membranes with a surface covered with micro-fiber. This nonwoven product is a multi-layer all polyester fabric specifically for chemical and microbial protective fabrics, products, and garments. It is constructed of compatible heat seal-able materials which lend themselves to high-speed heat seal-able production and ultimately automated manufacture of garments without sewing. It is a combination of a densely flocked polyester fiber surface on polyester membrane supported by polyester scrim.
Virtual RISE™ conference attendees include technology scouts and product developers in the nonwoven/engineered fabrics industry seeking new developments to advance their businesses. These attendees will electronically vote for the recipient of the 2021 RISE® Innovation Award, on Wed. Sept. 29th. The winner will be announced Thurs., Sept. 30th.

The conference program will cover timely and relevant industry topics including: Material Science Developments for Sustainable Nonwovens; Increasing Circularity in Nonwovens; Market Intelligence & Economic Insights; Promising Innovations in Nonwovens; Process Innovations in Nonwovens; Material Innovations in Nonwovens;  the full program can be viewed on the link: https://www.riseconf.net/conference.php

More information:
INDA nonwovens
Source:

INDA, the Association of the Nonwoven Fabrics Industry

MS establishes new business unit "Nonwovens" (c) MS Ultraschall Technologie GmbH
MS UTG Kampagnenmotiv
11.08.2021

MS establishes new business unit "Nonwovens"

The MS Ultrasonic Technology Group is a globally recognized technology and innovation leader in ultrasonic joining technology and develops and builds flexible special machines, pioneering series machines, modular systems and efficient components for high-performance complete solutions.

This enables optimal welding, punching, sealing, cut-off welding and riveting of thermoplastics, textiles and nonwovens as well as cutting of food and other products.

To ensure sustainable growth, MS is focusing on expanding its application portfolio and entering new market segments. MS Ultrasonic Technology Group is part of the listed MS Industrie AG with internationally active companies.

In addition to the company's previous activities, MS is now placing a new focus on the continuous welding of nonwovens and other materials.

The MS Ultrasonic Technology Group is a globally recognized technology and innovation leader in ultrasonic joining technology and develops and builds flexible special machines, pioneering series machines, modular systems and efficient components for high-performance complete solutions.

This enables optimal welding, punching, sealing, cut-off welding and riveting of thermoplastics, textiles and nonwovens as well as cutting of food and other products.

To ensure sustainable growth, MS is focusing on expanding its application portfolio and entering new market segments. MS Ultrasonic Technology Group is part of the listed MS Industrie AG with internationally active companies.

In addition to the company's previous activities, MS is now placing a new focus on the continuous welding of nonwovens and other materials.

More than 30 years of experience in the development and production of high-quality and innovative ultrasonic components, coupled with know-how in drive and control technology, will be incorporated into the new business segment. This means that customers receive ready-to-integrate systems with maximum precision from a single source. With the new MS Competence Center in Ettlingen (Germany), MS is fulfilling the wish of many customers to expand its application portfolio to include continuous joining, embossing and perforating of nonwovens and sealing of packaging.

MS is thus adding an innovative and specialized site, while maintaining a high level of vertical integration and support for all specialist areas through its main site in Spaichingen (Germany). In two application laboratories and a measurement and analysis laboratory, tests, evaluations and optimizations of various welding tasks are just as much a part of the service as the in-house production of engraving rollers through to complete systems.

  • Application engineering consulting for your welding task
  • Support in the design of the engraving roll
  • Execution of feasibility studies
  • Welding tests to determine the process parameters
  • Individualized process optimization
  • Finding solutions for problematic welding applications
  • Testing of quality-describing characteristics (tightness, porosity, strength)
  • Microscopic analysis of the welded joint in 3D
  • Sample creation and pre-series production
Source:

MS Ultraschall Technologie GmbH

powerribs with inset bonnet (c) Composites Evolution
04.08.2021

Composites Evolution: New range of flax-epoxy prepreg materials

Composites Evolution Ltd has teamed up with leading natural fibre reinforcement specialists Bcomp to launch a new range of flax-epoxy prepreg materials, designed to offer enhanced sustainability without compromising on performance.

Evopreg ampliTex™ prepregs combine Composites Evolution’s high-performance Evopreg epoxy resin systems with Bcomp’s award-winning ampliTex™ flax reinforcements, to deliver a family of materials which offer outstanding performance for component applications.

To reach the full performance of natural fibres, Evopreg ampliTex™ prepregs have been tailored to be compatible with Bcomp’s powerRibs™ reinforcement grid, enabling the same stiffness and weight as thin-walled monolithic carbon fibre parts while decreasing the CO2 footprint by 85% and improving safety thanks to a blunt braking behaviour without dangerous debris or sharp edges.

Composites Evolution Ltd has teamed up with leading natural fibre reinforcement specialists Bcomp to launch a new range of flax-epoxy prepreg materials, designed to offer enhanced sustainability without compromising on performance.

Evopreg ampliTex™ prepregs combine Composites Evolution’s high-performance Evopreg epoxy resin systems with Bcomp’s award-winning ampliTex™ flax reinforcements, to deliver a family of materials which offer outstanding performance for component applications.

To reach the full performance of natural fibres, Evopreg ampliTex™ prepregs have been tailored to be compatible with Bcomp’s powerRibs™ reinforcement grid, enabling the same stiffness and weight as thin-walled monolithic carbon fibre parts while decreasing the CO2 footprint by 85% and improving safety thanks to a blunt braking behaviour without dangerous debris or sharp edges.

Composites Evolution’s Sales & Marketing Director, Ben Hargreaves, explains further.
“Sustainability is an increasingly important factor for many of our customers - particularly those involved in motorsports and high-performance automotive applications. As you’d expect in these sectors though, sustainability can’t come at the expense of performance the two must go hand-in-hand. This is something that other prepreggers can struggle with, as natural fibres behave very differently to carbon or glass, for example.”

Customers would be able to understand the strengths and weaknesses of natural fibre composites, and to show where and how they can be adopted without the need for significant changes to existing composite component production processes.

One such customer is Retrac Group, whose composites division is one of the UK’s most experienced composites engineering companies across motorsports, automotive and aerospace. It recently used Evopreg ampliTex™ + powerRibs™ to produce a demonstrator bonnet panel for a race-bred supercar. Project Manager Alan Purves explains.


“We’re seeing a growing interest in flax fibre composites, particularly in the motorsports and niche vehicle sectors. It is therefore essential that we have developed an in-depth understanding of the processing requirements and performance capabilities of these materials, and are ready to respond to our customers' requirements. Being able to tap into the combined expertise and experience of both Composites Evolution and Bcomp is proving invaluable.”

Source:

Composites Evolution

(c) Fibre Extrusion Technology
04.08.2021

New FET meltspinning system upgrade for NIRI

Fibre Extrusion Technology Ltd of Leeds, UK has installed a new meltspinning system to upgrade research facilities at NIRI, the Nonwovens Innovation & Research Institute Ltd UK, a global leader in nonwoven engineering and product development.

Established in 1998, FET is a leading supplier of laboratory and pilot meltspinning systems with installations in over 35 countries and has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats.
 
The installation comprises a FET-102 Series Laboratory Meltblown Spinning System and FET-103 Monofilament Meltspinning System. This advanced equipment enhances NIRI’s extensive pilot facilities and state-of-the-art analytical laboratory for fast tracking innovation. In particular, the FET meltblown system will be utilised for R&D, pilot projects, sampling and prototyping, proof of concept testing and for designing cost-effective, sustainable and innovative products.

Fibre Extrusion Technology Ltd of Leeds, UK has installed a new meltspinning system to upgrade research facilities at NIRI, the Nonwovens Innovation & Research Institute Ltd UK, a global leader in nonwoven engineering and product development.

Established in 1998, FET is a leading supplier of laboratory and pilot meltspinning systems with installations in over 35 countries and has now successfully processed almost 30 different polymer types in multifilament, monofilament and nonwoven formats.
 
The installation comprises a FET-102 Series Laboratory Meltblown Spinning System and FET-103 Monofilament Meltspinning System. This advanced equipment enhances NIRI’s extensive pilot facilities and state-of-the-art analytical laboratory for fast tracking innovation. In particular, the FET meltblown system will be utilised for R&D, pilot projects, sampling and prototyping, proof of concept testing and for designing cost-effective, sustainable and innovative products.

NIRI supports global manufacturing companies to identify new opportunities for meltblown nonwovens, develop their next generation of products and accelerate their commercialisation activities. NIRI’s new upgraded laboratory and pilot system from FET can process a wide range of polymer types, including chemically recycled polymers, bio-polymers and many difficult-to-process materials.

Source:

Project Marketing for Fibre Extrusion Technology

21.07.2021

Devan: Supporting elite sport with ‘cool comfort technology’ Moov&Cool.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

Devan Chemicals has been supporting high performance sport in the UK and Belgium with its ‘cool comfort technology’ Moov&Cool.

Worldwide, hot temperatures are a new reality that brings extra challenges for athletes. Thermoregulation technology is becoming more and more important in order for athletes to perform at their best on the pinnacle of sports.

Working alongside the English Institute for Sport (EIS) and Sally Cowan Ltd, the technology is being applied to garments with the aim of improving the thermal comfort of elite athletes.

Moov&Cool consists of a multi-functional polymer technology that proposes to absorb heat during performance and improve the moisture management properties of the fabric. The treatment has been designed to simultaneously react to sweat build up and heat emission.

In Belgium, Devan has been involved in the Gold2Gold project carried out by Sport Vlaanderen. Gold2Gold is a unique collaboration between sports, government and the industry to prepare Belgian athletes to perform better in hot environments during world-level championships. Thermoregulating technology is increasingly becoming a key aspect of endurance performance for elite athletes. At that top level, small differences in body core temperature can make the difference between being on the podium or sometimes not even finishing the race.

Source:

Devan Chemicals NV / Marketing Solutions NV

20.07.2021

Hexcel: Speeding up new Product Development Cycles for Rassini

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

Hexcel, a global leader in advanced composites technologies, confirms that its HexPly® M901 prepreg system has been selected by Rassini, a Mexico-based technology leader in composite vehicle suspension systems, to speed up prototype and new product development cycles, reducing overall time to market with an easy to process material solution that enables effective early-stage design screening and cost-effective production.  

As a specialist in the mass production of composite helper leaf springs for various leading OEMs, Rassini continuously develops innovative new suspension component designs. Due to cost and timing, however, these new products cannot easily be prototyped using conventional high-pressure resin transfer molding (HP-RTM) technology.

With more than 15 years of experience in delivering glass fiber prepregs for the serial production of composite leaf springs, Hexcel developed its high-performance HexPly M901 prepreg system specifically for this type of application. HexPly M901 combines the right level of structural performance required with simple processing, providing Rassini with a reliable material solution optimized for rapid development and fine-tuning iterations.

HexPly M901 is a high Tg epoxy resin prepreg system specifically developed for structural components that will be exposed to harsh thermal and environmental conditions.  With short cure cycles of 10 minutes and below producing excellent green, or handling, strength of the composite part for demolding and unidirectional glass fiber aerial weights up to 1,600gsm, HexPly M901 delivers a powerful combination of benefits for suspension component applications.

More information:
Hexcel’s HexPly® Hexcel
Source:

Hexcel Corporation

COBRA continues Its Partnership with Fliteboard (c) COBRA
11.07.2021

COBRA continues Its Partnership with Fliteboard

COBRA International is pleased to confirm its continued partnership with Fliteboard as the builders of the new Fliteboard Series 2.  

Conceived in 2016, the Fliteboard range of electric foiling surfboards has established a leading position in the eFoil market. In early 2021, Fliteboard announced a package of evolutionary improvements to the original award-winning design for which COBRA has installed significant additional manufacturing capacity.

With Fliteboard growing rapidly, and thousands of boards now delivered across more than 80 countries,  COBRA will continue to support Fliteboard with additional moulds and lean manufacturing production lines added to reduce customer lead times. In addition to this production capacity expansion, COBRA has successfully met the technical challenges set by the Fliteboard team to incorporate all the new Series 2 board features into the existing production processes.

COBRA International is pleased to confirm its continued partnership with Fliteboard as the builders of the new Fliteboard Series 2.  

Conceived in 2016, the Fliteboard range of electric foiling surfboards has established a leading position in the eFoil market. In early 2021, Fliteboard announced a package of evolutionary improvements to the original award-winning design for which COBRA has installed significant additional manufacturing capacity.

With Fliteboard growing rapidly, and thousands of boards now delivered across more than 80 countries,  COBRA will continue to support Fliteboard with additional moulds and lean manufacturing production lines added to reduce customer lead times. In addition to this production capacity expansion, COBRA has successfully met the technical challenges set by the Fliteboard team to incorporate all the new Series 2 board features into the existing production processes.

Fliteboard’s first composite models used a carbon fibre and Innegra sandwich laminate over a moulded EPS foam core, combining maximum strength, stiffness, and durability with a low overall board weight. The same construction concept is used for the Series 2 boards, with several new finishes added to the range along with lighter colour matched EVA deck pads and upgraded latches on the carbon fibre board lid. New wood grain and metallic paint finishes have been introduced with COBRA’s semi-transparent paint system used to save weight and display the stunning hexagonal weave pattern of the carbon and Innegra reinforcement fabrics.

Source:

COBRA / 100% Marketing

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications (c) Hexcel Corporation
07.07.2021

Hexcel showcases Carbon Fiber Prepreg Capability for UAV Applications

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel, a global leader in advanced composites technologies, announces the successful maiden flight of a lightweight camera drone, developed using Hexcel HexPly® carbon fiber prepregs. The composite drone was developed by a team of students from the University of Applied Sciences Upper Austria in Wels with composite materials supplied by Hexcel Neumarkt in Austria.

A team of six students in the university’s lightweight construction and composite materials course was responsible for the complete design, engineering, and manufacture of the camera drone over a period of 18 months. Hexcel materials and optimization of the composite engineering enabled the team to reduce the composite structural mass by an impressive 42% compared to similar drones.

Hexcel Neumarkt was one of eight industrial partners supporting the university team throughout the project, providing all carbon fiber prepreg materials used for the drone’s landing gear as well as the fuselage. The ultra-lightweight 32g landing gear was laid up and cured in the press, whereas the fuselage was autoclave cured by the student team using Hexcel HexPly M901 and HexPly M78.1 prepreg resin systems with a combination of woven and unidirectional carbon fiber reinforcements.

With the development of Unmanned Aerial Vehicles (UAV) as a key emerging market and innovation space in the transportation sector, Hexcel’s collaboration with the University of Applied Sciences Upper Austria team not only creates an important link with the next generation of lightweight composite engineers but also highlights the weight saving and structural benefits of Hexcel composite material solutions.

"The massive weight saving achieved with their updated version of the camera drone is a fantastic achievement by the student team," said Michael Rabl, Dean of FH Wels of the Upper Austria University of Applied Sciences. "The joint study not only illustrates the wide range of complex and innovative composite techniques present in the drone sector but also presents the opportunities that exist for further development in the wider Urban Air Mobility (UAM) and aerospace composites markets.”

Hexcel congratulates the project team which includes Lukas Weninger, Karl-Heinz Schneider, Jakob Schlosser, Matthias Thon, Marla Unter, and Simone Hartl on an exceptional piece of lightweight composite design and thanks them for showcasing the contribution of Hexcel materials with a presentation and drone flight. Johanna Arndt, research and technology group leader at Hexcel Neumarkt, said, “It was a great pleasure to work with the team who were very cooperative and self-motivated to succeed. Watching the drone just fly around the Neumarkt plant was just great.”

Hexcel manufactures a complete range of carbon fibers, dry carbon UD tapes, specialty reinforcements, prepregs, and honeycomb core materials, providing customized manufacturing options for new UAM applications that combine aerospace reliability with the high-rate production required. Hexcel composite materials are the ideal solution for the lightest and most efficient cost-competitive transportation vehicles of the future.

Source:

Hexcel Corporation / 100% Marketing

Iluna Group brings to Milano Unica a new generation of responsible quality (c) ILUNA Group
06.07.2021

Iluna Group brings to Milano Unica a new generation of responsible quality

Iluna Group comes back to Milano Unica with a great and important goal: to relaunch the qualities and dimensions of sustainability by going beyond the ingredient.

Iluna’s new path, which was born in a moment when the market seems to speak about “fragility”, begins with the investment in the renewal of machines, which allow it to fly ever higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. Including cord yarn, shiny threads and an expansion of the range of GRS yarns, previously available only opaque. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

Iluna Group comes back to Milano Unica with a great and important goal: to relaunch the qualities and dimensions of sustainability by going beyond the ingredient.

Iluna’s new path, which was born in a moment when the market seems to speak about “fragility”, begins with the investment in the renewal of machines, which allow it to fly ever higher in terms of high-tech developments, quality, definition, effects of yarns and patterns. The journey into the new dimension of responsible quality continues with ad hoc developments in the field of GRS (Global Recycled Standard) certified recycled yarns, aimed at unprecedented effects both in look, in performance and in the hands of fabrics. Including cord yarn, shiny threads and an expansion of the range of GRS yarns, previously available only opaque. The cord yarn is a precious yarn with a ROICA™ EF premium stretch yarn core, GRS certified and developed with 50% of pre-consumer waste materials content - double, covered with an equally recycled shiny thread; the bright and translucent is instead to add brilliant effects so far not possible with a GRS yarn.

The printing processes are also born from this constant search for innovation towards new materials and new techniques, becoming more and more sustainable: Global Recycle Standard (GRS)-certified sublimation printing and register printing carrying Global Organic Textile Standard (GOTS) certification. This one overlap exactly on the design and color the details, reaching where the dye cannot reach.

Diversification has become essential in today’s competitive market and the fragility of the moments experienced in 2020 was the stimulus to return to being here again, to return to action. Flexibility is the watchword today, along with research. And Iluna has managed to go further: starting from the ingredients at the base of the materials, last year launched a collection with natural dyes made with GOTS certified plant-based dyes, up to proposing magnificent prints with extraordinary effects for this edition of the Milanese fair.

The three dimensions of sustainability, design and innovation are thus finally linked thanks to valuable partnerships with expert and excellent reference companies that have allowed these new developments and these unique results thanks to advanced technologies designed specifically for Iluna, which is today the only company to offer ingredients, natural colors and prints, all three strictly certified.

Archroma partners with Datacolor for Color Atlas Library (c) Archroma
The Archroma ‘Color Atlas’ library system will be available for color searching within ‘Datacolor TOOLS’ color quality control application.
01.07.2021

Archroma partners with Datacolor for Color Atlas Library

Archroma announced that the soon-to-be 5’760 color references of its Color Atlas library are made available within its ‘Datacolor TOOLS’ platform, an easy-to-use color quality control application for industries where color accuracy is a critical component of overall product quality.

Datacolor® provides color management solutions that empower customers to make objective, cost-effective and smart color decisions, in applications such as textile & apparel, paint & coatings, plastics, photography, design and many others. The perfect integration of its instruments and software help formulate, measure, control and communicate color, and its state-of-the-art algorithms reproduce color on materials and displays.

The Color Atlas was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Archroma announced that the soon-to-be 5’760 color references of its Color Atlas library are made available within its ‘Datacolor TOOLS’ platform, an easy-to-use color quality control application for industries where color accuracy is a critical component of overall product quality.

Datacolor® provides color management solutions that empower customers to make objective, cost-effective and smart color decisions, in applications such as textile & apparel, paint & coatings, plastics, photography, design and many others. The perfect integration of its instruments and software help formulate, measure, control and communicate color, and its state-of-the-art algorithms reproduce color on materials and displays.

The Color Atlas was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Today, the Color Atlas contains 4’320 colors applicable on cotton poplin, almost the double compared to similar tools available to textile and fashion specialists. Technical support is available to designer, manufacturers, as well as brands and retailers, through Archroma’s global offices - for every single color from its selection to its implementation in production. Engineered color standards empowered by NFC technology are also available for all colors and reproducible in production.
Archroma also just launched a similar tool with 1,440 colors on polyester. Both libraries will be available in the ‘Datacolor TOOLS’ platform for color searching.

Each color from the Color Atlas by Archroma® is available for purchase from Archroma as an ‘Engineered Color Standard’, precise digital data and access to global dyeing technical support.

With that, the brands, designers and mills using the ‘Datacolor TOOLS’ platform will have at their disposal the ability to search the 5’760 colors of the Color Atlas by Archroma®, to quickly find colors for their seasonal color palettes.

PCMC’s Fusion C now equipped to run Gelflex-EB® inks (c) PCMC, Barry-Wehmiller
16.06.2021

PCMC’s Fusion C now equipped to run Gelflex-EB® inks

Paper Converting Machine Company (PCMC) has announced that its Fusion C is now capable of running Gelflex-EB® CI flexo printing inks at 400 meters per minute.

The marketplace for high-speed CI flexo printing continues to grow, with flexible packaging printers requesting higher-speed presses with greater efficiency. Gelflex-EB® CI flexo inks and Energy Sciences Inc.’s (ESI) EZCure® Electron Beam (EB) are now able to meet customers’ demands on PCMC’s Fusion C, which is part of a series of flexographic printers that significantly reduce energy requirements by utilizing low-power consumption components, designs and operations.

Gelflex-EB® ink technology offers printers a cost-effective path to gain high-resolution print quality that removes more than 90 percent of solvents. It is safe for food packaging and can be used in both traditional reverse-print laminations or as a surface-print ink on multi-layer monomaterial recyclable structures.

Paper Converting Machine Company (PCMC) has announced that its Fusion C is now capable of running Gelflex-EB® CI flexo printing inks at 400 meters per minute.

The marketplace for high-speed CI flexo printing continues to grow, with flexible packaging printers requesting higher-speed presses with greater efficiency. Gelflex-EB® CI flexo inks and Energy Sciences Inc.’s (ESI) EZCure® Electron Beam (EB) are now able to meet customers’ demands on PCMC’s Fusion C, which is part of a series of flexographic printers that significantly reduce energy requirements by utilizing low-power consumption components, designs and operations.

Gelflex-EB® ink technology offers printers a cost-effective path to gain high-resolution print quality that removes more than 90 percent of solvents. It is safe for food packaging and can be used in both traditional reverse-print laminations or as a surface-print ink on multi-layer monomaterial recyclable structures.

JUMBO-Textil: Provider for narrow textiles in the fitness and rehabilitation sector (c) JUMBO-Textil
Flexible fitness textiles: cords and cables by JUMBO-Textil
08.06.2021

JUMBO-Textil: Provider for narrow textiles in the fitness and rehabilitation sector

There are good reasons why narrow textiles are used so frequently in the fitness and rehabilitation sector: they are flexible, safe, light, durable, skin-friendly and have a low injury potential. Essential components are JUMBO textiles: Elastics can be used to convert kinetic energy into potential energy. This is why elastic cords and cables are some of the essential components of almost all fitness equipment and tools. After all, it is the elasticity of the trampoline cords that gives the jumping-sheet its necessary force. Only elasticated expander cords create the desired resistance of the classic strength training equipment.

The force-elongation ratio of elastic cords and cables – like all other properties – is specified individually and optimally for the respective application. Depending on the specific requirements of the narrow textiles in the respective product, expert teams develop cords and cables made of high-tech fibres and on high-tech equipment: technical textiles that are a perfect fit for the equipment and its functions.

There are good reasons why narrow textiles are used so frequently in the fitness and rehabilitation sector: they are flexible, safe, light, durable, skin-friendly and have a low injury potential. Essential components are JUMBO textiles: Elastics can be used to convert kinetic energy into potential energy. This is why elastic cords and cables are some of the essential components of almost all fitness equipment and tools. After all, it is the elasticity of the trampoline cords that gives the jumping-sheet its necessary force. Only elasticated expander cords create the desired resistance of the classic strength training equipment.

The force-elongation ratio of elastic cords and cables – like all other properties – is specified individually and optimally for the respective application. Depending on the specific requirements of the narrow textiles in the respective product, expert teams develop cords and cables made of high-tech fibres and on high-tech equipment: technical textiles that are a perfect fit for the equipment and its functions.

Furthermore, non-elastic cords – depending on type and design – are essential as tension and connection elements for the functionality of fitness equipment. Textile components are often also an integral part of the equipment technology as fastening or fixing systems.

Source:

JUMBO-Textil / stotz-design.com

Sappi: New Sublimation Paper for Textile Industry (c) Sappi
08.06.2021

Sappi: New Sublimation Paper for Textile Industry

Sappi offers Transjet Tacky Industrial, a coated dye sublimation paper for digital transfer printing, specially developed for high-speed inkjet printing on highly elastic textiles. Also new is the uncoated dye sublimation paper Basejet, which has been developed for light designs for high-speed digital printing of fashion and home textiles.

  • Transjet Tacky Industrial: Immediate tack effect, high ink transfer, fast ink drying; no ghosting on elastic textiles thanks to reversible tack
  • Basejet: Consistent print quality for light designs, fast ink-drying, very fast transfer process

Transjet Tacky Industrial enables highly elastic fabrics to be printed on industrial high-speed machines that work with a higher glycol content, such as printheads from Kyocera. The paper is first printed with the desired image or pattern which is then transferred to the elastic polyester fabric by means of heat and pressure.

Sappi offers Transjet Tacky Industrial, a coated dye sublimation paper for digital transfer printing, specially developed for high-speed inkjet printing on highly elastic textiles. Also new is the uncoated dye sublimation paper Basejet, which has been developed for light designs for high-speed digital printing of fashion and home textiles.

  • Transjet Tacky Industrial: Immediate tack effect, high ink transfer, fast ink drying; no ghosting on elastic textiles thanks to reversible tack
  • Basejet: Consistent print quality for light designs, fast ink-drying, very fast transfer process

Transjet Tacky Industrial enables highly elastic fabrics to be printed on industrial high-speed machines that work with a higher glycol content, such as printheads from Kyocera. The paper is first printed with the desired image or pattern which is then transferred to the elastic polyester fabric by means of heat and pressure.

Sublimation paper for the textile industry
The new dye sublimation paper offers many benefits for the textile industry, which frequently has to adapt to changing trends. As it is suitable for use on high-speed digital printers, significantly more designs can be printed in the same time than was previously possible on plotters. Thanks to a special heat-reactive coating, the paper adheres to highly stretchable content, while the reversible tack prevents ghosting and textile shrinkage. Transjet Tacky
Industrial has a high ink load capacity so the print can be better accentuated due to strong colour saturation. The design remains clearly visible when the fabric is stretched to its maximum, which is often the case with sportswear in particular.

Basejet specially for light designs
Sappi has also added the Basejet uncoated dye sublimation paper to its portfolio, an additional solution for the digital printing of fashion and home textiles in consistent print quality. The uncoated dye sublimation paper is intended in particular for light designs and cost-driven production processes.

Source:

Sappi Europe

PCMC’s new Paragon reimagines the possibilities of tissue rewinding (c) PCMC
08.06.2021

PCMC’s new Paragon reimagines the possibilities of tissue rewinding

Winding technology offers simplicity, productivity and product control for premium tissue products

Paper Converting Machine Company (PCMC)—a division of Barry-Wehmiller and a global supplier of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries— is pleased to announce the launch of its Paragon tissue rewinder.

Paragon features a patent-pending center-surface design that produces superior caliper, bulk and diameter flexibility. Log winding takes place in a new-concept nest, comprised of a winding drum, winding belt, compound-motion rider roll and center drives.

"Paragon offers a completely new method of tissue rewinding,” said Andrew Green, PCMC Vice President of Tissue and Folding. “It is radical only in the sense that we made the wind nest as simple as possible. Usually when you increase a machine’s speed, you sacrifice ease of use, but we know customers want both. With Paragon, we created a machine capable of higher speeds that is easier to operate. It’s remarkable.”

Winding technology offers simplicity, productivity and product control for premium tissue products

Paper Converting Machine Company (PCMC)—a division of Barry-Wehmiller and a global supplier of high-performance converting machinery for the tissue, nonwovens, package-printing and bag-converting industries— is pleased to announce the launch of its Paragon tissue rewinder.

Paragon features a patent-pending center-surface design that produces superior caliper, bulk and diameter flexibility. Log winding takes place in a new-concept nest, comprised of a winding drum, winding belt, compound-motion rider roll and center drives.

"Paragon offers a completely new method of tissue rewinding,” said Andrew Green, PCMC Vice President of Tissue and Folding. “It is radical only in the sense that we made the wind nest as simple as possible. Usually when you increase a machine’s speed, you sacrifice ease of use, but we know customers want both. With Paragon, we created a machine capable of higher speeds that is easier to operate. It’s remarkable.”

Many of Paragon’s subsystems are proven technology solutions in use on PCMC’s trusted Forte rewinder, with several upgrades. Paragon’s enhanced web handling and grade changes are mainly recipe-driven, and its specially designed tools guide fast calibrations. Like the Forte rewinder, Paragon has an intentional open-access design, plus, typical areas to clean require less frequent attention, and recovery and restart occur safely and quickly. Paragon also closes the gap between humans and machines with a new Smart Touch human-machine interface (HMI), which delivers Industry 4.0 tools that transform data to action. Following high-performance design principles, the clean and modern interface provides enhanced operator help, and new smart analytic features offer insights to improve overall equipment effectiveness. The Smart Touch HMI works much like today’s mobile devices with swipe functionality, enabling a short learning curve and improved productivity.

“While the focus is on the new wind nest, a Paragon line is more than that,” said Green. “We added elements like advanced web handling and a state-of-the-art HMI. At PCMC, we are not into hyperbole, but we believe that this machine has raised the bar and is what future tissue-converting machines will be judged against. And, that’s why we called it Paragon.” 

Source:

Paper Converting Machine Company

(c) Statex Produktions- und Vertriebs GmbH
03.06.2021

Rebranding: Statex becomes Shieldex

Bremen-based Statex Produktions- und Vertriebs GmbH, a company founded in 1978 and currently in its 3rd generation of family management, is reinventing itself. One of the leading manufacturers in the field of silvered and metallised textiles has focused on the field of technical textiles and will in future place its brand name Shiledex at the centre of its corporate identity.

In accordance with the principle "Metallised Textiles for Challenges that matter", the new website is to transport the company's know-how in the areas of technical textiles, automotive, intelligence and military, medicine as well as fashion and design with a clear structure.

The sorting of the different application areas such as sensor technology, heating and lighting, EMC shielding, wellness and lifestyle as well as health and hygiene simplifies the access to the Shieldex product worlds.

 

Bremen-based Statex Produktions- und Vertriebs GmbH, a company founded in 1978 and currently in its 3rd generation of family management, is reinventing itself. One of the leading manufacturers in the field of silvered and metallised textiles has focused on the field of technical textiles and will in future place its brand name Shiledex at the centre of its corporate identity.

In accordance with the principle "Metallised Textiles for Challenges that matter", the new website is to transport the company's know-how in the areas of technical textiles, automotive, intelligence and military, medicine as well as fashion and design with a clear structure.

The sorting of the different application areas such as sensor technology, heating and lighting, EMC shielding, wellness and lifestyle as well as health and hygiene simplifies the access to the Shieldex product worlds.

 

More information:
Statex Shieldex metallised textiles
Source:

Statex Produktions- und Vertriebs GmbH

Kornit Digital: Vic Bay Apparel implemented Kornit Storm HD6 (c) Kornit Digital
02.06.2021

Kornit Digital: Vic Bay Apparel implemented Kornit Storm HD6

Kornit Digital, specialised in digital textile printing technology, announces Johannesburg, South Africa-based apparel decorator Vic Bay Apparel has implemented two Kornit Storm HD6 systems for sustainable, single-step production on demand. This installation answers increased demand for small orders and high-colour graphic designs, resulting from a dramatic growth in their e-commerce operation.

Vic Bay Apparel has been a manufacturer, supplier, and wholesaler of basic t-shirts and golf shirts for 25 years, supplying blank apparel to decorators and resellers of promotional clothing. They predominantly service resellers in the tourism, workwear, printing, embroidery, and advertising markets.

Kornit Digital, specialised in digital textile printing technology, announces Johannesburg, South Africa-based apparel decorator Vic Bay Apparel has implemented two Kornit Storm HD6 systems for sustainable, single-step production on demand. This installation answers increased demand for small orders and high-colour graphic designs, resulting from a dramatic growth in their e-commerce operation.

Vic Bay Apparel has been a manufacturer, supplier, and wholesaler of basic t-shirts and golf shirts for 25 years, supplying blank apparel to decorators and resellers of promotional clothing. They predominantly service resellers in the tourism, workwear, printing, embroidery, and advertising markets.

SHIMA SEIKI to exhibit at ITMA Asia and CITME 2020 (c) SHIMA SEIKI
02.06.2021

SHIMA SEIKI to exhibit at ITMA Asia and CITME 2020

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HonG KonG) LTD., will participate in the ITMA Asia + CITME 2020 exhibition to be held at the national Exhibition and Convention Center in Shanghai, China in June.

Through its exhibit theme—Step Beyond—SHIMA SEIKI will present its vision of the future, while addressing a variety of solutions for the new normal, including proposals in Factory Automation, Digital Transformation (DX), and various online solutions.

Flat knitting solutions provider SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Hong Kong subsidiary SHIMA SEIKI (HonG KonG) LTD., will participate in the ITMA Asia + CITME 2020 exhibition to be held at the national Exhibition and Convention Center in Shanghai, China in June.

Through its exhibit theme—Step Beyond—SHIMA SEIKI will present its vision of the future, while addressing a variety of solutions for the new normal, including proposals in Factory Automation, Digital Transformation (DX), and various online solutions.

At ITMA Asia SHIMA SEIKI will be making proposals for factory automation centered around the special manufacturing capabilities of our WHOLEGARMENT® knitting machines. WHOLEGARMENT® knitwear can be knit in one entire piece without the need for linking or sewing, and allows for on-demand knitting. SHIMA SEIKI will present its WHOLEGARMENT® knitting technology in the form of two of the latest machines. The flagship MACH2XS is the one of most advanced flat knitting machines, featuring proprietary four-needle bed and Slideneedle™ technology combined with spring-type moveable sinkers and i-DSCS+DTC® Digital Stitch Control System with Intelligence and Dynamic Tension Control, and capable of all-needle knitting of WHOLEGARMENT® items. MACH2XS is presented in ultrafine 18L gauge, shown for the first time in China. Also shown for the first time in China, MACH2VS, a flexible V-bed machine capable of knitting WHOLEGARMENT® knitwear using every other needle, or conventional shaped knitting using all needles. It also features spring-type moveable sinkers and i-DSCS+DTC® Digital Stitch Control System with Intelligence and Dynamic Tension Control. MACH2VS is presented in ultrafine 18G with auto yarn carriers as a prototype option.

ITMA Asia will also be the occasion for a sneak preview of next-Generation 4-bed WHOLEGARMENT® knitting technology. The new machine is named SWG-XR, adopting the SWG moniker from the first-generation WHOLEGARMENT® knitting machine introduced back in 1995. The "X" represents 4 needle beds arranged in an Xshaped formation as per the original SWG-X machine, while "R" stands for Reborn and Revolution, referring to a renewal of SHIMA SEIKI's WHOLEGARMENT® knitting that raises the technology to unprecedented levels. By increasing the number of systems from 3 to 4 and featuring auto yarn carriers, SWG-XR allows even higher productivity and vastly improved range of knitting.

In order to further support efforts in DX in the fashion industry, SHIMA SEIKI has released three new online services over the past year which will also be showcased at ITMA Asia: 'APEXFiz™' subscription-based design software; 'yarnbank ™' digital yarn sourcing web service; and 'SHIMAnAVI™' e-learning service.

(c) vombaur
Dipl.-Ing Dirk Wachsmuth, the new Managing Director with responsibility for sales, marketing and development
21.05.2021

Dirk Wachsmuth to become CEO of vombaur GmbH & Co. KG

The management of vombaur was restructured as of 1 May 2021: Dipl.-Ing. Dirk Wachsmuth will be responsible for sales, marketing and development as the new Managing Director. The previous Managing Director Peter vom Baur will retain responsibility for vombaur after almost 30 years as a shareholder of the parent company Textation Group.

After studying machinery construction, Dirk Wachsmuth worked for many years first for a filter manufacturer, then in the plastics industry. Together with Andreas Kielholz and Christoph Schliefer, he will be heading vombaur GmbH & Co. KG from now on.

vombaur is a specialist for seamless narrow textile woven tubulars. The company has come through the crisis year 2020 on a solid footing and is positioned for the future. vombaur is currently investing an amount in the double-digit millions in a state-of-the-art headquarters that will be inaugurated in 2023.

The management of vombaur was restructured as of 1 May 2021: Dipl.-Ing. Dirk Wachsmuth will be responsible for sales, marketing and development as the new Managing Director. The previous Managing Director Peter vom Baur will retain responsibility for vombaur after almost 30 years as a shareholder of the parent company Textation Group.

After studying machinery construction, Dirk Wachsmuth worked for many years first for a filter manufacturer, then in the plastics industry. Together with Andreas Kielholz and Christoph Schliefer, he will be heading vombaur GmbH & Co. KG from now on.

vombaur is a specialist for seamless narrow textile woven tubulars. The company has come through the crisis year 2020 on a solid footing and is positioned for the future. vombaur is currently investing an amount in the double-digit millions in a state-of-the-art headquarters that will be inaugurated in 2023.

More information:
Dirk Wachsmuth vombaur
Source:

stotz-design.com