From the Sector

Reset
31 results
INDA: World of Wipes® Conference attracts Professionals Live and In-Person (c) INDA
19.07.2021

INDA: World of Wipes® Conference attracts Professionals Live and In-Person

INDA, the Association of the Nonwoven Fabrics Industry, wrapped up its 15th annual World of Wipes® International Conference, July 12-15, with a presentation of the World of Wipes Innovation Award® to Kimberly-Clark Corporation and the highest attendance record in six years.

This year’s WOW conference welcomed 475 enthusiastic professionals from 14 countries to its in-person World of Wipes® (WOW) International Conference to advance their wipes business. Held in Atlanta, GA, the conference was notable as the first in-person conference in the nonwovens and engineered fabrics industry in 500 days due to the pandemic.

Industry professionals from 33 global companies delivered presentations and answered questions in sessions that included Wipes and the Growing Plastics Debate, Regulatory Requirements for Disinfecting and Sanitizing Wipes, Trends in the Wipes Markets and Among Consumers, Wet Wipe Preservative Innovations, Covid-19 Impacts on Wipes Consumption and Cleaning Habits, Sustainable Wipes Packaging and Dispensing, Nonwoven Substrates for More Sustainable Wipes, and Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities.

INDA, the Association of the Nonwoven Fabrics Industry, wrapped up its 15th annual World of Wipes® International Conference, July 12-15, with a presentation of the World of Wipes Innovation Award® to Kimberly-Clark Corporation and the highest attendance record in six years.

This year’s WOW conference welcomed 475 enthusiastic professionals from 14 countries to its in-person World of Wipes® (WOW) International Conference to advance their wipes business. Held in Atlanta, GA, the conference was notable as the first in-person conference in the nonwovens and engineered fabrics industry in 500 days due to the pandemic.

Industry professionals from 33 global companies delivered presentations and answered questions in sessions that included Wipes and the Growing Plastics Debate, Regulatory Requirements for Disinfecting and Sanitizing Wipes, Trends in the Wipes Markets and Among Consumers, Wet Wipe Preservative Innovations, Covid-19 Impacts on Wipes Consumption and Cleaning Habits, Sustainable Wipes Packaging and Dispensing, Nonwoven Substrates for More Sustainable Wipes, and Flushable Wipes: Loved by Consumers, Wrongly Accused by Utilities.

Highlights included the announcement of Kimberly-Clark Scott® 24-Hour Sanitizing Wipes as the winner of this year’s World of Wipes Innovation Award®. The annual award recognizes the product that most expands the use of nonwovens and demonstrates creativity, novelty, uniqueness, and technical sophistication within the entire nonwovens wipes value chain.

Other highlights included the presentation of the 2021 INDA Lifetime Technical Achievement Award to John Poccia. The annual award is nominated by INDA’s Technical Advisory Board and presented to an individual whose technical achievements over a long-standing career have significantly contributed to the technical advancement, success, and growth of the nonwovens industry.

Other presentation highlights included:

  • Recent Developments Under the EU Green Deal and Plastics Strategy – Pandemic Update – Gyongyi David, Attorney at Law, V V G B Advocaten-Avocats, Director- EHS Regulatory, Steptoe & Johnson LLP
  • FDA & EPA Framework of Regulations: Dry Wipes Claims – Tony Herber, Principal Regulatory Consultant/Assistant Federal Team Manager, Scientific & Regulatory Consultants, Inc. (SRC. Inc.)
  • Consumer Wipes Usage During Covid-19 and Future Use – Chris Dresselhuys, Business Director-North American Retail Wipes, Rockline Industries
  • Sustainable Solutions for Wipes – Vishal Bansai, Vice President, Innovation, and Silke Brand-Kirsch, VP, Marketing and Business Development, Glatfelter Gernsbach GmbH
  • Sustainability Impacts Across the Value Chain of Wipes Packaging – Vicky Chang, Marketing Manager, Consumer & Industrial Products, Amcor Flexibles
  • Unveiling Wet Wipes Preservation: New Findings on Microbial Risks and Preservative Solution – Paul Salama, Ph.D., CTO& Head of Innovation, Sharon Laboratories
Mimaki supports Printers Worldwide in Global Innovation Days Event (c) EMEA, Mimaki Europe B.V
17.06.2021

Mimaki supports Printers Worldwide in Global Innovation Days Event

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

Mimaki held their global event Innovation Days (2-4 June 2021) to great success. The event brought together printers, journalists and experts from Mimaki Japan, USA and Europe, to nurture innovation in the sign graphics, industrial, textile and 3D markets and drive success within the industry. The global event also introduced the market to Mimaki’s recent product releases, the JFX550, JFX600 and SUJV-160.

In a week of webinars, workshops, demonstrations, and networking events, over 1,300 attendees from all across the world logged in to participate, with the demonstration of UJV100 and JV100 printers, 3D printing workshop and car wrap workshop being the most popular events. As a first of its kind for Mimaki, visitors were able to speak with regional Mimaki representatives, gaining greater insight into the global printing industry as it recovers from the COVID-19 pandemic.

A stand-out attraction of the event was the recently released 100 Series, which is priced affordably to allow printers entry into different markets, as many look to expand their portfolio in these uncertain times. The new JFX600-2513 and JFX550-2513, which debuted a few weeks prior at virtual drupa, similarly are higher end but still affordable printers, when compared to other large format UV flatbed machines in its class. 3D full colour print technology also featured heavily in the event, as Mimaki explored the exciting propositions it opens up in different markets and how the brand continues to extend the reach and accessibility of cutting-edge 3D technologies with its upcoming 3DUJ-2207 printer.

Mr. Kazuaki Ikeda, President of Mimaki Engineering commented, “I’d like to extend my thanks to everyone who joined us during this exciting new virtual event. During the pandemic, carrying on innovating has been central to Mimaki’s objectives, with eight new products having been released since October, and even more scheduled to come out over the course of this year. I hope that we can soon all meet at in-person events, once it’s safe to do so, but until then I’m excited to see the results of the continued collaboration and innovation of print industry that we saw in our Innovation Days event.”

Source:

EMEA, Mimaki Europe B.V

16.06.2021

Closed-loop recycling pilot project for single-use facemasks

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

  • Fraunhofer, SABIC, and Procter & Gamble join forces
  • The Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE and its Institute for Environmental, Safety and Energy Technology UMSICHT have developed an advanced recycling process for used plastics.
  • The pilot project with SABIC and Procter & Gamble serves to demonstrate the feasibility of closed-loop recycling for single-use facemasks.

Due to COVID-19, use of billions of disposable facemasks is raising environmental concerns especially when they are thoughtlessly discarded in public spaces, including - parks, open-air venues and beaches. Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

“Recognizing the challenge, we set out to explore how used facemasks could potentially be returned into the value chain of new facemask production”, says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. “But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT’s expert scientists and SABIC’s Technology & Innovation specialists to investigate potential solutions.”

As part of the pilot, P&G collected used facemasks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

“A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling, would have not done the job”, explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. “In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the Coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products”, adds Hofmann, who is also Head of Research Department “Advanced Recycling” at Fraunhofer CCPE.

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new PP resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. Mass balance is considered a crucial bridge between today’s large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

“The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain”, emphasizes Mark Vester, Global Circular Economy Leader at SABIC. “The circular material is part of our TRUCIRCLE™ portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources.”

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibers material. “This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics”, says Hansjörg Reick, P&G Senior Director Open Innovation. “Of course, further work is needed but the results so far have been very encouraging.”

The entire closed loop pilot project from facemask collection to production was developed and implemented within seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Source:

Fraunhofer

AMAC kooperiert mit ITA (Institut für Textiltechnik der RWTH Aachen und deren ITA GmbH) für die weitere Geschäftsentwicklung im Bereich Composites  © AMAC
fltr: Markus Beckmann, Prof. Thomas Gries, Dr. Michael Effing, Dr. Christoph Greb
19.04.2021

AMAC cooperates with ITA

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

AMAC cooperates with ITA (Institute for Textile Technology of RWTH Aachen University and their ITA GmbH) for the business development in composites 

As of April 19th, 2021, AMAC is pleased to announce its cooperation with the Institute for Textile Technology, ITA, of RWTH Aachen University and their ITA GmbH. The aim of the cooperation is to strengthen and develop their business activities in composites.

ITA, as one of the largest institutes on the campus of the excellence University RWTH Aachen, Germany, develops complete solutions from the manufacturing of the fiber itself over the processing of textile intermediates with thermoplastic and thermoset resins, textile-based part manufacturing, capabilities such as braiding, pultrusion and in-situ impregnation of textile preforms. Top 3 focused industries are transportation and particularly the e-mobility sector, building and construction as well as the wind energy sector. Additionally, ITA GmbH is the partner of the industry in R&D, focusing on 8 business segments, providing technology and knowledge transfer, as well as offering comprehensive solutions along the entire textile value chain.

Prof. Dr. Thomas Gries, Director of ITA, explains the background of the strategic cooperation with focus on composites: „Our long-term experience and unmatched know-how with all aspects of continuous fibers, non-wovens and web-based reinforcements allows us to deliver to the composite manufacturers a complete technology and service offer around the development of technical textiles, from the development of glass and carbon fibers to the textile-based processing of composite parts. In all process steps of our research and developments, we focus on sustainable and recyclable solutions, an efficient cost-performance ratio, the possible use of bio-based materials and the reduction of the CO2 footprint. We are glad to cooperate with Dr. Michael Effing and AMAC in order to benefit from his door-opening network in the composites industry. “

Dr. Michael Effing, Managing Director of AMAC GmbH: „I am very happy to support the ITA to generate innovation thanks to further industrial networking and pre-competitive joint projects. ITA is indeed a one-stop source for composite solutions from the fiber to the cost-efficient manufacturing of final parts. In the context of the Covid-19 impact to the entire industry, it makes sense to bundle forces. Furthermore, ITA, with its long tradition and satisfied customers offers further valuable networking opportunities to the composites industry as well as access to relevant complementary fiber-based excellence and 250 different technologies in their machine-park with an outstanding infrastructure in Aachen.”

15.04.2021

Rieter Annual General Meeting 2021

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The AGM was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 15, 2021, the independent proxy represented a total of 2 084 shareholders who hold 63.6% of the share capital.

The shareholders approved the proposal of the Board of Directors not to distribute a dividend in view of the negative business result. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2022.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office. Stefaan Haspeslagh was newly elected to the Board of Directors for a one-year term of office.

Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2020, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review.

Outlook Updated
As already communicated at the Results Press Conference on March 9, 2021, Rieter expects the market recovery to continue in 2021. The company expects an order intake exceeding CHF 500 million in the first half of 2021. For the first half of 2021, Rieter still anticipates that sales will be below break-even point. For the full year 2021, Rieter expects an operating profit.

More information:
Rieter spinning machinery spinning
Source:

Rieter Management AG

15.04.2021

Brodelec uses Direct-To-Fabric Printing with Kornit Digital Printing Technology

Brodelec chose to broaden its scope of activity by investing in the Kornit Presto S.

Dominique Willems, CEO at Brodelec, comments: "We had already seen a strong trend for personalized items, whether in the furniture or fashion sector, but since the beginning of the pandemic we have seen a strong growth in requests for small-scale personalization. And that's exactly where Kornit offers us a solution with incredible durability and quality, perfectly suited to our needs."

Brodelec chose to broaden its scope of activity by investing in the Kornit Presto S.

Dominique Willems, CEO at Brodelec, comments: "We had already seen a strong trend for personalized items, whether in the furniture or fashion sector, but since the beginning of the pandemic we have seen a strong growth in requests for small-scale personalization. And that's exactly where Kornit offers us a solution with incredible durability and quality, perfectly suited to our needs."

He continues: "The Kornit Presto S has allowed us to bring our latest project to life: the creation of a website entirely dedicated to ordering custom masks. Thanks to an online editor and our 200 models, our customers can order their masks in quantities ranging from 1 to several thousand pieces if necessary. As the Kornit Presto is free of certain technical and chemical constraints and has adapted perfectly to Brodelec's workflow system; we are currently printing more than 10,000 masks per week and can respond to requests within extremely short deadlines while guaranteeing quality and sharpness of detail. The masks meet the recommendations of the AFNOR and are designed with a fabric that filters out particles in the air by over 90%! Therefore, the designed and printed fabric masks are designated as category 1 and meet the UNS1 standards. They are distributed after testing for 60 washes."

14.04.2021

PCMC adds virus-killing wet wipes machines to nonwovens lineup

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Paper Converting Machine Company (PCMC) has announced its industry-leading wet wipes folding machines the Rx200 and Mako Clipper are now available with high-content alcohol, measuring as much as 70 percent.

Previously, PCMC wet wipes machines operated with less than 20 percent alcohol, producing disinfectant wipes for personal, home, industrial and automotive use. However, the COVID-19 pandemic has created a spike in demand for sanitizing wipes that contain at least 70 percent alcohol, the key component in killing or deactivating viruses.

To help manufacturers meet the increased demand, PCMC redesigned its Rx200 and Mako Clipper to safely operate with high-content alcohol. The new designs feature increased air exchange for better ventilation and additional sensors to eliminate the risk of flash points and fires. The machines also include IDS 150/300 integrated dual stackers and a redesigned Mako saw to meet more stringent regulations and higher machine performance expectations.

Source:

Barry-Wehmiller

DITF: SMART TEXTILES erstmals digital (c) DITF
Forschung an Handschuhen mit Drucksensoren für Logistik und Produktion.
31.03.2021

DITF: SMART TEXTILES erstmals digital

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Hightech-Textilien sind ein weltweiter Wachstumsmarkt mit überraschend vielen Anwendungsmöglichkeiten. Beim Anwenderforum SMART TEXTILES am 24. und 25. März 2021 tauschten sich auch in diesem Jahr Industrie und Wissenschaft über neue Produkte, Trends und Marktchancen aus. Die Veranstaltung fand aufgrund der anhaltenden COVID 19-Pandemie in einem abwechslungsreichen digitalen Format statt.

Textilien mit intelligenten Funktionen sind die Zukunft. Wichtiges Beispiel ist die Automobilindustrie. Die Referenten präsentierten Textilien als Schnittstelle zwischen Mensch und High-Tech und als formschönes Interieur kombiniert mit vielen Funktionen. Ergänzt wird die hohe Funktionalität der Fahrzeuge mit interaktiver Kleidung für die Fahrer. Sie wärmt und kühlt je nach Bedarf, leuchtet automatisch beim Verlassen des Fahrzeugs, navigiert und lädt sich wieder auf, sobald sie an den Kleiderhaken gehängt wird. Auch smarte Mützen können in manchen Bereichen Helme ersetzen, indem sie für mechanischen Schutz und Sicherheit des Trägers sorgen und Insekten abwehren.

Über den Anwendungsbereich Mobilität hinaus gibt es vor allem in Medizin und Pflege Bedarf an intelligenten Textilien. Sensorische Sohlen in den Schuhen analysieren den Gang und helfen damit Ärzten und Physiotherapeuten, die optimale Therapie auszuwählen - zum Beispiel gegen Rückenschmerzen. Taschentücher, Stofftaschen oder Handschuhe aus speziellen Silbertextilien töten Viren und Bakterien. Eine Innovation, die in der Corona-Pandemie besonders gefragt ist.

Neue Textilelektroden überleben inzwischen sogar viele
Waschgänge und machen smarte Textilien alltagstauglich. Das ist besonders wichtig bei Sportbekleidung, mit der auch Hobbysportler gerne ihr Training tracken, auswerten und optimieren. Neu entwickelte Stoffe haften großflächig am Körper und stellen auf diese Weise sicher, dass Vitalparameter zuverlässig erfasst werden.

Waschbar und leitfähig sind auch Druckknöpfe, die im wahrsten Sinne des Wortes Kontaktierung per Knopfdruck herstellen. In den robusten Knöpfen steckt Elektronik wie Sensoren, Aktoren, LEDs und Schalter.

Das Anwenderforum zeigte auch in diesem Jahr, dass viele Visionen inzwischen realisierbar und marktfähig sind. Herausforderungen sind in Zukunft, nachhaltige Materialien und Prozesse einzusetzen sowie die E-Textiles zu recyceln. Darüber hinaus stellt die Datenflut, die durch die smarten Textilien erzeugt werden kann, hohe Ansprüche an die Sicherheit und die Verarbeitung der Daten.

Das Anwenderforum SMART TEXTILES wird jährlich von den Deutschen Instituten für Textil- und Faserforschung Denkendorf (DITF), dem Forschungskuratorium Textil e. V. in Berlin und dem Textilforschungsinstitut Thüringen Vogtland e. V. (TITV) in Greiz veranstaltet, um den Austausch von Industrie und Wissenschaft in der in der D-A-CH-Region zu fördern.

Das 10. Anwenderforum SMART TEXTILES findet vom 2.-3. März 2022 statt und ist wieder als Präsenzveranstaltung kombiniert mit einer Firmenbesichtigung geplant. Der Veranstaltungsort wird rechtzeitig bekanntgegeben.

Source:

DITF

HIGHTEX Trade Fair postponed to 14-18 June 2022 (c) ITM
15.03.2021

HIGHTEX Trade Fair postponed to 14-18 June 2022

HIGHTEX International Technical Textiles and Nonwoven Trade Fair, which is planned to be held on June 22-26, 2021 was decided to postpone to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with our participants and sector representatives.

The HIGHTEX Organization Team made the following statements: “We as HIGHTEX Organization Team, our priority is to protect your valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the HIGTEX Exhibition justified and will understand.”

HIGHTEX 2022, which will be held in Istanbul Tuyap Fair and Congress Center between 14- 18 June 2022, simultaneously with the ITM 2022 Exhibition.

HIGHTEX International Technical Textiles and Nonwoven Trade Fair, which is planned to be held on June 22-26, 2021 was decided to postpone to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with our participants and sector representatives.

The HIGHTEX Organization Team made the following statements: “We as HIGHTEX Organization Team, our priority is to protect your valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the HIGTEX Exhibition justified and will understand.”

HIGHTEX 2022, which will be held in Istanbul Tuyap Fair and Congress Center between 14- 18 June 2022, simultaneously with the ITM 2022 Exhibition.

HIGHTEX 2022 being the first and only exhibition in its field in Turkey will host the world's leading technical textile and nonwoven manufacturers in Istanbul for 5 days.
HIGHTEX 2022, where many companies from Turkey and abroad will exhibit their latest technologies and products; will be visited by many industry professionals from medical to ready-to-wear, from decoration to cosmetics, from automotive to defense.

Source:

HIGHTEX

05.03.2021

ITM Exhibition postponed to 14-18 June 2022

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

ITM International Textile Machinery Exhibition, which is planned to be held on June 22-26, 2021 postponed to June 14-18, 2022, considering the effects of the ongoing Covid-19 pandemic in the world. This postponement decision was taken as a result of intense discussions and evaluations with participants and sector representatives.

The ITM Organization Team made the following statements: “Our priority is to protect valuable exhibitors and visitors’ investments and all rights, not our commercial earnings. In this regard, we believe that all of our participants will find this compulsory postponement decision taken for the ITM Exhibition justified and will understand.”

ITM 2022, which will be held with partnership of Tüyap Tüm Fuarcılık INC. and Teknik Fuarcılık INC. in cooperation with TEMSAD, will organize at Istanbul Tuyap Fair and Congress Center on June 14-18, 2022.

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

Sorpol Ltd. brings American antiviral technology to Israel (c) Ascend Performance Materials, APMPR055
19.01.2021

Ascend Performance Materials: Sorpol Ltd. brings American antiviral technology to Israel

Sorpol Ltd., a leading importer and distributor of industrial raw materials in Israel, has launched a website to sell Acteev Protect™ masks, made in the USA by polyamide manufacturer Ascend Performance Materials. The two companies also plan to partner in the distribution of Acteev surgical masks, N95 respirators, nonwoven media and textile fabrics as they become available.

Laboratory tests have demonstrated Acteev fabric effective at deactivating 99.9% of the viruses SARS-CoV-2, the cause of COVID-19, and H1N1, a flu virus. Acteev technology also eliminates bacteria and fungi.

Ofer Soreq, Sorpol’s marketing director, said the Acteev Protect line fits in neatly with the mission of the company.

Sorpol Ltd., a leading importer and distributor of industrial raw materials in Israel, has launched a website to sell Acteev Protect™ masks, made in the USA by polyamide manufacturer Ascend Performance Materials. The two companies also plan to partner in the distribution of Acteev surgical masks, N95 respirators, nonwoven media and textile fabrics as they become available.

Laboratory tests have demonstrated Acteev fabric effective at deactivating 99.9% of the viruses SARS-CoV-2, the cause of COVID-19, and H1N1, a flu virus. Acteev technology also eliminates bacteria and fungi.

Ofer Soreq, Sorpol’s marketing director, said the Acteev Protect line fits in neatly with the mission of the company.

Recent testing on Acteev fabric completed at the University of Cambridge has demonstrated that Acteev technology deactivates the virus that causes COVID-19, SARS-CoV-2, with 99.9% efficacy on contact. Ascend has submitted several masks designs to the U.S. Environmental Protection Agency and the U.S. Food and Drug Administration to obtain the appropriate regulatory clearances to make specific claims regarding the technology’s antiviral properties in the United States.

In addition to antiviral, antifungal and antibacterial protection, the washable, reusable masks are lightweight, breathable and odor-fighting, making them comfortable to wear during a long shift at work or for outdoor workouts.

Acteev Protect shows promise for use beyond masks, according to Ascend. The technology was originally developed for workout wear, and now the company is working on textile applications ranging from gloves to scrubs to high-end athleisure

Source:

EMG / Ascend Performance Materials

(c) Zuse-Gemeinschaft
10.12.2020

Zuse-Gemeinschaft noch stärker machen

  • Industrieforschungsverbund weiter gewachsen
  • Appell an die Politik
  • Im Präsidium der Zuse-Gemeinschaft zwei neue Gesichter

„Wir wachsen weiter und stellen uns den Herausforderungen in Forschung, Industrie und Politik mit neuem Elan.“ Das hat der Präsident der Zuse-Gemeinschaft, Prof. Martin Bastian, bei der Mitgliederversammlung des Verbundes am 9. Dezember 2020 in Berlin erklärt, die als Hybrid-Format bei der Gesellschaft zur Förderung angewandter Informatik (GFaI) stattfand. Es war die erste virtuelle Mitgliederversammlung des jungen Verbundes seit seiner Gründung im Jahr 2015.

  • Industrieforschungsverbund weiter gewachsen
  • Appell an die Politik
  • Im Präsidium der Zuse-Gemeinschaft zwei neue Gesichter

„Wir wachsen weiter und stellen uns den Herausforderungen in Forschung, Industrie und Politik mit neuem Elan.“ Das hat der Präsident der Zuse-Gemeinschaft, Prof. Martin Bastian, bei der Mitgliederversammlung des Verbundes am 9. Dezember 2020 in Berlin erklärt, die als Hybrid-Format bei der Gesellschaft zur Förderung angewandter Informatik (GFaI) stattfand. Es war die erste virtuelle Mitgliederversammlung des jungen Verbundes seit seiner Gründung im Jahr 2015.

Auch inhaltlich beschäftigte die Pandemie die Mitglieder. Mit einer Aufstockung für die Industrieforschung im Etat des Bundeswirtschaftsministeriums wurden im Bundeshaushalt 2020 zusätzliche Mittel bereitgestellt, welche die Parlamentarier vor allem für die gemeinnützige, privatwirtschaftlich organisierte Industrieforschung vorsahen. „Auch die im Haushalt für das kommende Jahr dafür vorgesehenen Mittel werden dringend benötigt“, betonte Bastian in seiner Video-Ansprache. Der Präsident der Zuse-Gemeinschaft weiter: „Der Einsatz für die Hilfen im Zuge des Corona-Konjunkturpakets hat für uns verstärkt und z.T. schmerzhaft deutlich gemacht: Wir benötigen einen eigenen Haushaltstitel für die gemeinnützige Industrieforschung, damit staatliche Förderung des Bundes für Innovationen zielgenau die anwendungsnahe Forschung erreicht.“ Hier gebe es für die Zuse-Gemeinschaft noch viel zu tun. Bastian will die Belange der Zuse-Gemeinschaft daher künftig noch stärker wahrgenommen wissen. „Mit ihren inhaltlichen und thematischen Schwerpunkten sind unsere Mitglieder für künftige Aufgaben in Forschung und Industrie hervorragend aufgestellt, um gemeinsam mit Partnern markttaugliche, nachhaltige Neuerungen hervorzubringen. Sie verdienen Unterstützung“, unterstrich Bastian.

Die Zuse-Gemeinschaft als Verbund von aktuell 76 Industrieforschungseinrichtungen ist 2020 weiter gewachsen und hat sich mit dem Transfer von Technologie und Wissen in die Wirtschaft einen Namen gemacht. Erfolgreicher Forschungstransfer zeigt sich an Instituten der Zuse-Gemeinschaft auch in zahlreichen Ausgründungen. Eine solche Ausgründung hat dazu geführt, dass Gründungspräsident Dr. Ralf-Uwe Bauer sich voll auf dieses Unternehmen, die Smart Advanced Systems GmbH, konzentriert und daher aus dem Präsidium der Zuse-Gemeinschaft ausgeschieden ist. Ebenfalls nicht mehr dem Präsidium gehört Dr. Friedrich-Wilhelm Bolle an. Er ist als geschäftsführender Gesellschafter zur 1979 gegründeten GFI Umwelt Gesellschaft für Infrastruktur und Umwelt mbH in Bonn gewechselt.

Die Mitgliederversammlung wählte Dr. Bayram Aslan* und Prof. Dr. Jens Schrader* neu ins Präsidium. Sie komplettieren das im Oktober 2019 für einen Vierjahreszeitraum neu gewählte Präsidium mit seinen insgesamt sieben Mitgliedern.

 

*Weitere Informationen finden Sie im Anhang.

04.12.2020

Intertextile Shanghai Home Textiles March 2021

The Spring Edition of Intertextile Shanghai Home Textiles will return to the National Exhibition and Convention Center (Shanghai) from 10 – 12 March 2021, together with four other textile events including Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value. The fairs will offer an all-round business platform and a host of exciting synergy effects for the sector.

High-quality finished products to be offered
In March 2021, the Spring Edition will showcase a selection of home textile products including bedding & towelling, rugs, table & kitchen linen, home textile technologies, textile design and many more. Additionally, the fair will be held concurrently with Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value, offering a comprehensive sourcing platform for the sector.

The Spring Edition of Intertextile Shanghai Home Textiles will return to the National Exhibition and Convention Center (Shanghai) from 10 – 12 March 2021, together with four other textile events including Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value. The fairs will offer an all-round business platform and a host of exciting synergy effects for the sector.

High-quality finished products to be offered
In March 2021, the Spring Edition will showcase a selection of home textile products including bedding & towelling, rugs, table & kitchen linen, home textile technologies, textile design and many more. Additionally, the fair will be held concurrently with Intertextile Shanghai Apparel Fabrics – Spring Edition, Yarn Expo Spring, CHIC and PH Value, offering a comprehensive sourcing platform for the sector.

Lenzing views Intertextile as an ideal platform to present their sustainable home products
The Lenzing Group, a leading producer of man-made cellulose fibres, is amongst the major industry players who have already confirmed their participation in the upcoming fair. Ms Lesley Wu, Home Textile Business Development at Lenzing Fibers (Shanghai), talked about new market trends in the post-pandemic era and the reasons they decided to join the Spring Edition of Intertextile Shanghai Home Textiles:

“Even though the home textile industry has, to some extent, been negatively impacted by the COVID-19 outbreak, there are both opportunities and challenges for the sector. Without a doubt, environmental protection and sustainable development are the hottest topics in today’s society. Consumers are paying more attention to healthy lifestyles and looking to make a shift to green consumption as a result of the pandemic. More and more consumers are opting for functional and sustainable raw materials. Environmentally sustainable fibres are therefore gaining popularity.”

“Right now, we expect the home textile industry will continue its steady recovery. Home textile companies may look for opportunities in product and marketing innovations, such as developing functional and sustainable home textile products and exploring various O2O business model options,” Ms Wu added.

Lastly, Ms Wu shared why they chose to participate in Intertextile: “We decided to exhibit at Intertextile Shanghai Home Textiles because it is an influential trade fair for the industry. As the Lenzing Group has been expanding in the home textile market, we want to use this platform to showcase the applications for TENCEL™ branded fibres in home textiles, and to further promote sustainability through our TENCEL™ Home cellulosic fibres.”

To find out more about this fair, please visit: www.intertextilehome.com

Source:

Messe Frankfurt / Intertextile Shanghai Home Textiles

26.11.2020

Autoneum: Current assessment of the 2020 financial year

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

The global automobile production has been recovering faster than expected since summer. If this positive trend continues through the full second half of the year, Group revenue in local currencies in the second semester is likely to be just around –5% below the level of the prior year period. For the full year 2020 it is anticipated that revenue in local currencies will decline by around –20% compared to 2019.

Based on this development of revenue, the extensive cost reduction measures taken in response to the COVID-19 crisis and the on-schedule progress of the turnaround in North America, an EBIT margin of 4-5% is expected for the second half of the year and a slightly positive EBIT margin for 2020 as a whole. Supported by the strict management of working capital and investments, the free cash flow is likely to be in the higher double-digit million range, which should enable a slight reduction in debt.

The outlook for 2021 and especially the first half-year remains uncertain and depends strongly on how the pandemic will develop. According to forecasts, global vehicle production in 2021 will still not reach the level of 2019.

Source:

Autoneum Management AG

HeiQu: Carlo Centonze and his daughter Anna (c) HeiQ
Carlo Centonze and his daughter Anna
20.11.2020

HeiQ Viroblock wins Swiss Technology Award 2020

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The Swiss Technology Award announced the 2020 prizes, and among all the notable finalist innovations of the year, HeiQ was bestowed the highest honor as First Prize Winner for its breakthrough antiviral textile technology HeiQ Viroblock.

Developed in record time and launched after the Swiss authorities announced the lockdown in March 2020, HeiQ Viroblock has had a major impact on the global textile industry and is being unprecedently adopted by mills around the world.

The technology that makes HeiQ Viroblock a unique innovation
What exemplifies HeiQ Viroblock is its ability to turn any fabric antiviral. It’s among the first textile technologies in the world to be proven effective against SARS-CoV-2 (COVID-19). HeiQ Viroblock consists of a combination of HeiQ’s patent-pending vesicle and silver technologies. The two mechanisms of attack result in an over 99.9% destruction of viruses in 5 minutes that is unrivaled in the industry. HeiQ Viroblock is a unique patent-pending formulation of 72% bio-based ingredients, made with 100% cosmetic-grade materials from the International Nomenclature of Cosmetic Ingredients list. HeiQ Viroblock is also a shining example of Swiss cooperation between academics and the industry. The silver technology was developed at ETHZ (Eidgenössische Technische Hochschule Zürich), the vesicle technology at EPFL (École polytechnique fédérale de Lausanne), and the production was scaled up at FHNW (Fachhochschule Nordwestschweiz).

HeiQ Viroblock has demonstrated unparalleled speed from laboratory to consumer
HeiQ launched the new antiviral textile technology HeiQ Viroblock on March 16, 2020 – two hours after Switzerland declared a state of emergency. This was made possible with the indispensable support of Swiss research Partner FHNW and the EPFL which helped accelerate product validation. The fast scale-up of production was enabled by the FHNW School of Life Sciences with their new Process Technology Center (PTC) by special permit. With its agile operations and global footprint, HeiQ also brought HeiQ Viroblock face masks and other PPE (personal protection equipment) to different corners of the world where are needed. Now, Swiss consumers can also acquire HeiQ Viroblock enhanced face masks online.

Reacting to the news of HeiQ Viroblock winning this year’s Swiss Tech Award, Co-founder and CEO Carlo Centonze says: “I am both amazed and honored that HeiQ has won this award a second time in just ten years, and from among some incredible tech innovation finalists. It confirms our resolve to push the boundaries and push innovations to help the world with its most pressing and imminent problems. This award is recognition for our company and team that have spared no efforts to develop and launch HeiQ Viroblock at such speed and make a valuable contribution to the global pandemic efforts. We remain true to our mission: enhancing the everyday lives of people with smart and efficient textile effects.”

 

Source:

HeiQ

Oerlikon: Meltblown und Spunbond (c) Oerlikon
19.11.2020

Oerlikon: Meltblown and Spunbond technologies

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Protective equipment demands high-end nonwoven products
The rising demand for protective masks and other medical protective equipment since the start of the coronavirus pandemic and the associated global ramping up of production capacities has also resulted in an increase in the demand for nonwovens for the production thereof. Initially, this resulted in bottlenecks in the provision of meltblown filter nonwovens. To this end, there had until this point be very few producers of medical filter nonwovens outside China. Meanwhile, the demand for spunbond systems is also rising. “Due to the structure of our group, we are in the fortunate position to swiftly reallocate and free up our production capacities. This means that we are able to relatively quickly deliver not only meltblown systems, but also spunbond equipment”, explains Dr. Ingo Mählmann, Head of Sales & Marketing at Oerlikon Nonwoven, talking about the positive situation at the company.

The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Our machines and systems for manufacturing manmade fiber and nonwovens solutions enjoy an outstanding reputation throughout the world. Ever more manufacturers in the most diverse countries are hoping to become independent of imports”, comments Dr. Mählmann. The Oerlikon Nonwoven meltblown systems are being delivered to Germany, China, Turkey, United Kingdom, South Korea, Italy, France, North America and – for the very first time – to Australia until well into 2021.

Quality and efficiency in demand
Depending on the purpose of the application, medical PPE (personal protection equipment) should be breathable and comfortable to wear, protect medical staff against viruses, bacteria and other harmful substances and form a barrier against liquids. For these reasons, they are often made of either pure spunbond or of spunbond-meltblown combinations. Here, the meltblown nonwoven core assumes the barrier or filter task, while the spunbond has to retain its shape, while being tear-resistant, abrasion-proof, absorbent, particularly flame-resistant and nevertheless extremely soft on the skin.

All masks are not created equal – thanks to the ecuTEC+
Protection against infections such as coronavirus can only be guaranteed with the right quality.

The nonwovens can be electrostatically-charged in order to further improve the filter performance without additionally increasing breathing resistance. Here, Oerlikon Nonwovenʼs patented ecuTEC+ electro-charging unit excels in terms of its extreme flexibility. Nonwovens manufacturers can freely choose between numerous variation options and set the optimal charging method and intensity for their specific applications. In this way, even the smallest particles are still attracted and reliable separated by a relatively open-pored nonwoven. Nevertheless, mask wearers are still able to easily breathe in and out due to the comparatively loose formation of the fibers. To this end, it comes as no surprise that all meltblown systems currently destined for the production of mask nonwovens are equipped with the ecuTEC+ unit.

13.11.2020

The AVK presents its awards virtually for the first time

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

The AVK – Industrievereinigung Verstärkte Kunststoffe e.V. – has once again announced the winners of its prestigious Innovation Awards. Decided by an expert jury, the awards recognise and honour sustainable innovations in three categories: “Innovative Products/Applications”, “Innovative Processes” and “Research and Science”.

Overview of all the winners in the three categories:

Category “Innovative Products/Applications”
1st Place: “Directly-cooled electric motor with integral lightweight housing made of fibre reinforced polymers - DEmiL” – developed by the Fraunhofer Institute for Chemical Technology ICT, Pfinztal, Germany, in partnership with the Karlsruhe Institute of Technology and Sumitomo Bakelite Co., Ltd.*

2nd Place: “Intrinsically Reprocessable, Repairable and Recyclable (3R) thermoset composites for more Competitive and Sustainable Industries” – developed by cidetec, Donostia-San Sebastian, Spain*

3rd Place: “Fireproof composite metal hybrid structure – LEO® fire protection sandwich with integrated Hyconnect steel-glass hybrid connector” – developed by SAERTEX GmbH & Co. KG and Hyconnect GmbH.*

Category “Innovative Processes”
1st Place: “Robotised Injection Moulding (ROBIN)” – developed by Robin, Dresden with the Institute for Lightweight Engineering and Polymer Technology at the TU Dresden*

2nd Place: “Omega stringer from the roll” – developed by the German Aerospace Center, Braunschweig*

3rd Place: “Hybrid die-casting – manufacturing of intrinsic CFRP-aluminium composite structures in aluminium high-pressure die-casting” – developed by Faserinstitut Bremen e. V. with Fraunhofer IFAM, Bremen*

Category “Research and Science”:
1st Place: “New high-temperature resistant UP resins and toughening agents” – developed by Münster University of Applied Sciences with BASF SE Global New Business Development, Leibniz Institute for Polymer Research e. V., Saertex multicom GmbH*

2nd Place: “Scientific basis for the industrial application of the thermoplastic resin transfer moulding (T-RTM) process” – developed by Fraunhofer Institute for Chemical Technology ICT, Pfinztal*

3rd Place: “The material- and energy-efficient production of turbine struts by the integrative combination of thermoset fibre reinforced materials” – developed by the Institute of Polymer Technology, University of Erlangen-Nuremberg with the German Aerospace Center, Gubesch Group, Schmidt WFT, Siebenwurst, Raschig.

Award ceremony on the Internet for the first time
For the first time, due to the Covid-19 pandemic, the award ceremony took place as an online event on 12 November 2020. Many of the award winners’ innovations will be presented again in this year’s AVK Innovation Award brochure. This will be available online: https://www.avk-tv.de/innovationaward.php

 

*Please see attached document for more information.

 

Source:

AVK – Industrievereinigung Verstärkte Kunststoffe e.V

Oerlikon (c) Oerlikon
f.l.t.r Jochen Adler, Ralf Morgenroth, Markus Reichwein, Matthias Schmitz
15.10.2020

Oerlikon Experts share their know-how online

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

  • Factory know-how from a single source – A boost for your efficiency
    4. November 2020: 11:00-11:45h CET
    Speaker: Jochen Adler, Oerlikon Manmade Fibers CTO*
     
  • VarioFil – Your compact spinning solution
    11. November 2020: 11:00-11:45h CET
    Speaker: Ralf Morgenroth, Head of Engineering Textile Machinery BB Engineering (BBE)*
     
  • Green Technologies – Join us on the road to a sustainable fiber industry
    2. December 2020: 11:00-11:45h CET
    Speaker: Markus Reichwein, Head of Product Management Oerlikon Manmade Fibers*
     
  • VacuFil – Your future upcycling plant, from waste to value
    9. December 2020: 11:00-11:45h CET
    Speaker: Matthias Schmitz, Head of Engineering Recycling Technology, BB Engineering (BBE)*

 

*Please read the attached document for more information

Source:

Oerlikon Textile GmbH & Co. KG

Anker Carpet (c) Anker
13.10.2020

Anker, Devan and Shark Solutions develop flame retardant aviation carpet

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Anker, Devan and Shark Solutions teamed up to create the world’s first flame retardant aviation carpet using a recycled binder. Inspired by the knowledge and the needs of the aviation market, Anker motivated to achieve this new goal together. The PVB binder reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill.

German carpet manufacturer Anker is the first company to offer flame retardant carpets for aviation that are made with a recycled binder. In the search for a more sustainable binder, Anker discovered the PVB from Shark Solutions, a Danish cleantech company focused on giving a new life to post-consumer PVB. Properties of the aviation carpet with PVB as binder are the same as those of traditional non-sustainable carpets. The market has been looking for this type of solutions for a long time and market introduction has already started. Anker will introduce well known and special developed styles of aviation carpets with PVB and plan to take out traditional non-sustainable aviation carpets stepwise as soon as possible.

Shark’s PVB reuses laminated glass, from windshields and architectural/building glass, that otherwise would go to landfill. The non-toxic binder (no chlorine or phthalates) is fully recyclable and thus lives up to the future standards of the industry.

Textile innovator Devan Chemicals, known for its tailor-made flame retardant solutions, was called in to develop the flame retardant back coating, which is compliant with the Airbus and Boeing safety standards. “Based on many years of experience and competences in customer related developments, improving recycling rates is getting more and more important”, says Dirk Vanpachtenbeke, R&D manager Flame Retardants at Devan. “We are very proud that, together with Anker and Shark Solutions, we can contribute to this rising demand for products that meet the standards of a circular economy solution.”

In other news, Anker and Devan are already working on a new project, which includes Devan’s antimicrobial/viral-reducing technology. Recently, Devan published test results on the activity of their technology (BI-OME®) against SARS-CoV-2 and other viruses. According to independent testing, BI-OME is proven to achieve 99% and higher virus reduction, including of SARS-COV-2, on samples before washing and retains 98.5% even after 25 wash cycles. This technology has been recognized with the 2020 European Technology Innovation Leadership Award by Frost & Sullivan.

Source:

Devan Chemicals NV / Marketing Solutions NV