From the Sector

Reset
46 results
seat belts Photo Oerlikon Textile GmbH & Co. KG
07.09.2023

Oerlikon Polymer Processing Solutions at the Techtextil India 2023

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
The yarns used in airbags are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technol-ogies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants - without any loss of function in any climate and for the lifetime of the vehicle

Buckle up!
Seat belts have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments. “With our unique, patented Single Filament Layer Technology, we offer a sophisticated and simultaneously gentle high-tenacity (HT) yarn process for manufacturing these lifesavers and other applications made from industrial yarn”, explains André Wissenberg, Head of Marketing.

Road reinforcement using geotextiles
Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demand-ing tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC –  quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

Source:

Oerlikon Textile GmbH & Co. KG

(c) Oerlikon
The Oerlikon Barmag eccentric screw pump
02.06.2022

Oerlikon Barmag presents innovations at the ACHEMA 2022

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Focus on eccentric screw pumps and pumps for shear-sensitive materials

Improved productivity and increased lifespan and tailored solutions also for the most demanding applications within the chemicals and plastics industries and in PUR applications – these are the convincing arguments with which Oerlikon Barmag is showcasing its precision metering pumps at this year’s ACHEMA between August 22 and 26, 2022 in Frankfurt. The focus is on the new pump for shear-sensitive conveying media and the new eccentric screw pump.

Eccentric screw pumps – robust all-rounders convey any medium
The requirements for pumps are considerable, as the demand for customized solutions for increasingly complex processes is rising. This is particularly true for Oerlikon Barmag’s new eccentric screw pump range. High wear-resistance, increased durability and robust operation – the new pump is tailor-made for conveying highly-filled, high-viscosity and abrasive media, such as filled adhesives, filled silicones and filled casting compounds, for example. The is the multi-stage seal system, which considerably increases the pump’s lifespan. The upstream shaft sealing ring protects the slide ring seal against excessively-fast wear caused by challenging media. In turn, the optimum alignment of the drive shaft – ball bearing-supported and centrally-guided through the shaft sealing ring – prevents any metal debris caused by friction and hence ensures considerably greater durability. Producers benefit from considerably greater productivity, as the pumps’ maintenance intervals and hence machine downtimes are significantly reduced.

New pump for shear-sensitive materials
For increasingly complex customer-specific process solutions, Oerlikon Barmag is now expanding its GA series, developed especially for the challenging conveying of high-viscosity media, to include the GAB51F for shear-sensitive conveying media. The newly-developed pump with its viscosity range of max. 300 Pas is tailored to conveying high-viscosity, shear-sensitive materials such as adhesives and silicones, for example. “The shear forces impacting the medium within the pump are reduced to a minimum as a result of a specially geometry”, explains Thorsten Wagener, Senior Sales Manager within the Pump Construction business unit. The material is conveyed through the pump in an as gentle and low-pulsation manner as possible and metered precisely at the outlet – ensuring it retains its characteristic properties.

High-speed metering pump with sealed product space
The high-speed metering pump has been especially developed for metering poorly-lubricating media. Here, the main benefit is the sealed product space, which extends the pump’s lifespan considerably. The space that comes into contact with the media is limited to the area around the gears. “As a result, the high-speed pump is particularly suited for applications in the chemicals industry, which frequently involve aggressive acids”, comments Thorsten Wagener.

GM series for low-viscosity media
The pumps in the GM and GA series provide precision metering with low-pulsation feeding of the conveying medium. The multi-stage GM pump conveys low-viscosity media (i.e. 250 bar, 100 mPas) even under high pressure and in the most challenging conditions. The square design from the proven GM series is the standard pump for many metering tasks. The development of the multi-stage pump expands the applications range for the GM series considerably. The round 2-stage GM pump has been developed especially for use in high-pressure technology. It masters the particular challenge of conveying small throughputs with low viscosities. The pump is perfect for 0.05 through 20 cm³/rev feed sizes and is excellently suited for use in high-pressure machines for PUR molded parts, foam slab stock, refrigeration unit insulations and sandwich panels, for example.

GA series pumps for high-viscosity media
The Oerlikon Barmag GA range has been especially developed for the challenging conveying of media with higher viscosities. The GA series pumps are available for conveying volumes of between 1.25 and -30 cm³/rev (0.6-144 l/h). They have been designed for pressures of up to 200 bar, for viscosities of up to 1.500 Pas as well as for temperatures of up to max. 225 °C. With this range of pumps, Oerlikon Barmag offers its customers tailor-made solutions for many technical processes in which high-precision and even metering is of paramount importance.

The drum pump – conveying and metering using a single unit
With the drum pump, the Oerlikon Barmag pump specialists have created a pump designed specifically for conveying and metering high-viscosity materials such as adhesives, silicones and other high-viscosity materials from drums and other large containers and for pressures of up to 250 bar. Its special features not only include the fact that it removes high-viscosity materials from the drum, but that it also meters the medium directly without any additional interim stops.

Source:

Oerlikon

(c) Messe Frankfurt, deepak@deepakdavda.com
13.12.2021

Techtextil India: First post-lockdown edition with overwhelming responsive from industry

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

After three-days of product sourcing and business networking, Techtextil India 2021 in Mumbai concluded in a strong and positive note. The trade fair emerged as a crucial meeting place for the technical textile players to rebuild their supplier links, promote industry integration and engage in lucrative knowledge exchange.

The eighth edition of Techtextil India stood out to be a ground-breaking business platform for the technical textile sector to build a new and strong foundation in the new normal. The aim of the new edition was to promote industry unification and business recovery across the value chain of technical textiles.

The event held at Bombay Exhibition Centre was inaugurated by major dignitaries, including Shri Ajit Chavan, Secretary – Textiles Committee, Ministry of Textiles, Government of India. Over the course of its three buzzing days, the show garnered an attendance of 4,087 visitors drawn by live demonstration of latest products, technologies and innovations exhibited by over 150 technical textile brands on the show floor.

The event received an overwhelming response, reflecting industry’s keen interest to explore new developments and opportunities in technical textiles. In regards to the same, Mr Abhijit Kulkarni, President – Textile Engineering Group, A.T.E. India, stated: “It was the first and best physical show also on hybrid mode filled with enthusiastic buyers and customers who visited our booth and had very fruitful discussions with us. Several leading textile manufacturers visited our stalls, including: Strata Geosystems India, SKAPS Industries, Reliance Composites, Paramount Textiles, and Welspun, to name a few.”

Alok Masterbatches Pvt Ltd, Khosla Profile Pvt Ltd, ATE Group, Lucky International, Meera Industries Limited, Park Non-Woven Pvt Ltd, Sarex Chemicals, SICAM, Suntech Geotextile Pvt Ltd and Weavetech Engineers, were among the leading Indian companies exhibiting at the show.

The significance of the three-day fair was further elevated by the German pavilion. Technical textile manufacturers from Germany, such as Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co, displayed their latest technologies on the show floor, which garnered significant attention from the Indian buyers.

The first Digital Symposium was another highlight of Techtextil India 2021. The forum delved into a series of crucial topics in technical textiles discussing PLI schemes, FDI opportunities and policies, investment opportunities in Tamil Nadu, & New Investment Opportunities, Sustainable Technical Textiles and Global sustainable approach for Textiles with Antimicrobial Performance.

Concluding on a successful note, Techtextil India 2021 emerged as a platform of new beginnings for the technical textiles sector and for businesses trying to retain their shape and seeking momentum after the tough pandemic phase.

Source:

Messe Frankfurt HK

Photo: Messe Frankfurt
08.11.2021

Techtextil India: Hybrid exhibition in November

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

India’s leading trade fair in technical textiles, nonwovens and composites, Techtextil India, is ready to make a comeback through its hybrid edition launch from 25 – 27 November 2021. With a series of live product demonstrations, insightful knowledge sessions and B2B networking opportunities, the multimodal trade fair will provide a strong avenue for technical textile professionals to reimagine their business potential.
 
After a successful grand edition in 2019, Techtexil India is all set to return for the very first time since the pandemic. The three-day exhibition will be hosted in a hybrid format from 25 – 27 November 2021, Bombay Exhibition Centre, Goregaon which will unite technical textile players from across its varied application areas. Top technical textile brands including JB Ecotex, PARK Nonwoven, Loyal Textiles Lenzing, Mehala, Meera Industries, amongst many others will showcase their latest products at the hybrid fair. Moreover, leading German brands exhibiting at Techtextil India 2021 will be hosted under the German pavilion.

The conjunction between the physical exhibition and the online business matchmaking platform will make way to a wider range of networking. Local and international visitors who are unable to attend the venue will be able to witness the exhibition virtually through the ‘MFI virtual app’ which will host live knowledge sessions and product demonstrations for visitors. The two-day multimodal trade fair allows the visitors to search for specific products like fibers, yarns, nonwovens, machinery, coated textiles with easy-to-use filters further to which they can share their query or connect directly with the respective exhibitors.

At the same time, visitors attending the venue will be welcomed under a well-organised physical exhibition following the government-authorised safety protocols of ‘MFI SafeConnect’. These protocols will enable visitors to engage in secure face-to-face interactions with exhibitors and witness the latest technical textile technologies and innovations in-person.

Alliance with the Government of Tamil Nadu
In a bid to strengthen indigenous production through the state and attract investors, the nodal agency for investment promotion and facilitation for the Government of Tamil Nadu – Guidance has signed up for Techtextil India 2021. Furthermore, technical textile players from Tamil Nadu such as Cyber Textiles India Pvt Ltd, Jayashree Spun Bond, Lenzing Ag India, Liester Technologies, Loyal Textile Mills Ltd, Milltex Engineers Pvt Ltd, Superfil Products Pvt Ltd, Uster Technologies (India) Pvt Ltd have also confirmed their participation for the exhibition.
Announcing a close co-operation with Messe Frankfurt India for the 2021 edition, Ms Pooja Kulkarni, IAS MD & CEO, Guidance Tamil Nadu, stated: “While there are several inherent advantages for the growth of technical textiles in Tamil Nadu specifically, many raw materials used in the production of sanitary products, artificial ligaments, seat belt webbings, airbags are still heavily imported. In this context, the alliance with Techtextil India Forum can help us reduce import dependency and bring investments in R&D, manufacturing, innovation by partnering with global technical textiles companies.”

With 50% of India’s textile mills in Tamil Nadu and complementary clusters of knitting, weaving and medical devices manufacturing in Coimbatore, and Tiruppur, the region provides immense opportunities for Meditech investments. Two petrochemical and refinery units – One in Cuddalore and another in Nagapattinam by CPCL is in the process of being established in Tamil Nadu. These units will enable availability of MMF raw material for the textile industry across the state. Hence, manufacturing in Tamil Nadu can be a win-win arrangement for investors as India provides access to the burgeoning market as well.

International expertise with German pavilion
Techtexil India 2021 edition will feature an exclusive German Pavilion showcasing products and technologies from top German manufacturers, including Autefa Solution Germany GmbH, DILO Systems GmbH, Emtec Electronic GmbH, Georg Sahm GmbH & Co, Karl Mayer Verwaltungsgesellschaft mbH, Merz Maschinenfabrik GmbH and Oerlikon Barmag Zweigniederlassung der Oerlikon Textile GmbH & Co.

Source:

Messe Frankfurt (HK) Ltd

(c) Oerlikon. Oerlikon Nonwoven OSR spunmelt technology
Oerlikon Nonwoven OSR spunmelt technology
03.09.2021

Oerlikon Nonwoven at INDEX: Focus on nonwoven products

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens

„Your reliable partner in the nonwoven industry“ – the slogan speaks for itself: Oerlikon Nonwoven is exhibiting at the world’s leading nonwovens trade fair – the INDEX in Geneva, Switzerland (October 19-22, 2021) – with one of the market’s broadest portfolios. The Neumünster-based systems constructor will be focusing on market- and customer-oriented system solutions for filtration, hygiene, medical, geotextile and other industrial applications. Trade fair visitors can delve deep into the company’s comprehensive product and process know-how both live at trade fair stand no. 2314 and via the INDEX online platform.

  • Nonwovens for filtration, insulation and sorption applications
  • Comprehensive spunbond portfolio
  • Quality Sized Right-Technology: spunmelt systems for the hygiene and medical market
  • Wipes using Oerlikon's Phantom technology
  • Airlaid technology for sustainable nonwovens
More information:
Oerlikon Nonwoven INDEX
Source:

Oerlikon

Oerlikon Webinar with a Focus on Customer Service (c) Oerlikon
19.08.2021

Oerlikon Webinar with a Focus on Customer Service

The new series of webinars of the Swiss Oerlikon Group’s Manmade Fibers Solutions business unit will be focusing on services for manmade fiber systems.

Short Overview of the webinars:

  • How ceramics within the yarn path improve the quality of your yarn on September 01
  • myOerlikon – tailored digital services provide a comprehensive overview on September 13
  • Always by your side – with Oerlikon Remote Services on September 22
  • Better safe than sorry – maximize productivity and minimize downtimes with regular machine check-ups on September 29

For more information click here, where we keep you informed about upcoming events.

The new series of webinars of the Swiss Oerlikon Group’s Manmade Fibers Solutions business unit will be focusing on services for manmade fiber systems.

Short Overview of the webinars:

  • How ceramics within the yarn path improve the quality of your yarn on September 01
  • myOerlikon – tailored digital services provide a comprehensive overview on September 13
  • Always by your side – with Oerlikon Remote Services on September 22
  • Better safe than sorry – maximize productivity and minimize downtimes with regular machine check-ups on September 29

For more information click here, where we keep you informed about upcoming events.

Source:

Oerlikon

Oerlikon: Booth at ITMA Asia 2021 (c) Oerlikon
01.06.2021

Oerlikon with a hybrid trade show concept at ITMA Asia

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

On the occasion of the VDMA press conference, André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs at Oerlikon Polymer Processing Solutions Division, presented the company's concept for ITMA Asia with the claim: Clean Technology. Smart Factory.

Due to the Corona pandemic, Oerlikon has decided to concentrate with their Chinese sales and service teams on guests primarily from China and greater Asia. However, some experts from Germany, who are working in China at our locations anyway, will be live on site at the booth. Other experts from Germany, India and US will be available online for the entire 5 days of the trade fair and will simply be connected by video conference to the discussion with the visitors on site if there is a need for.

At ITMA Asia 2021, Oerlikon will present the next generation of an automatic texturing solution with up to 25 % energy saving and up to 30 % higher production speed, easy maintenance and best yarn quality. The core of this machine, the socalled EvoCooler, will be shown as an exhibit in combination with digital solutions like AIM4DTY. In the field of high-precision flow control solutions components, the two new gear metering pumps developments for the production of aramid and spandex will be presented as well.

23.04.2021

Oerlikon: Creating a new growth platform

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

  • INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
  • Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
  • Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
  • Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
  • Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

Oerlikon signs agreement to acquire INglass, a global leader in high precision polymer flow control equipment, to accelerate expansion strategy in polymer processing market

  • INglass and its HRSflow Division is a market leader spezialized in hot runner sytems
  • Technology is highly complementary to Oerlikon’s existing capabilities in polymer flow control and will expand Oerlikon’s market access
  • Acquisition accelerates Oerlikon’s strategy in diversifying its manmade fibers business to expand into the high-growth polymer processing solution market
  • Oerlikon renames ‘Manmade Fibers’ Division to ‘Polymer Processing Solutions’
  • Acquisition is expected to be completed in the second quarter of 2021

Oerlikon, a leading provider of surface engineering, polymer processing and additive manufacturing, announced today that it has signed an agreement to acquire Italy-headquartered INglass S.p.A. and its innovative hot runner systems technology operating under its market-leading HRSflow business.

The strategic acquisition is a significant step in expanding Oerlikon’s current manmade fibers business into the larger polymer processing market. The acquisition accelerates and enhances existing organic initiatives to diversify and strengthen the company’s core high-precision polymer flow control capabilities, products and services. The completion of the transaction is subject to customary regulatory approvals and is expected by the second quarter of 2021.

To reflect Oerlikon’s expansion into a larger high-growth market, the Manmade Fibers Division will be renamed as Polymer Processing Solutions Division. This division will have two business units: Flow Control Solutions and Manmade Fibers Solutions. The busines unit Flow Control Solutions will combine the expertise of Oerlikon Barmag’s existing gear metering pumps business line and INglass’ HRSflow operations. The business unit Manmade Fibers Solutions will continue to focus on growing the existing chemical fiber machinery and plant engineering business, offering plant solutions for the production of polyester, polypropylene and polyamide.

“Our new Polymer Processing Solutions Division and the acquisition of INglass S.p.A. and its HRSflow business are critical components of Oerlikon Group’s growth strategy. We are accelerating our efforts to drive sustainable organic and inorganic growth in all of our businesses. The acquisition enables new synergy opportunities between both Oerlikon divisions in specific end markets such as automotive. With INglass and its HRSflow operations, we acquire leading suppliers in their markets with proven success of their technologies and services,” said Dr. Roland Fischer, CEO Oerlikon Group.

“We firmly believe that within the Oerlikon Group we can further exploit the potential of our hot runner systems technology and, when combined with the capabilities of Oerlikon Barmag gear metering pumps and their melt distribution engineering competence, will position our business as one of the leading precision flow control specialists for multiple applications in a global growth market”, said Antonio Bortuzzo, CEO of INglass S.p.A.

New business unit offers great growth potential

The Oerlikon Barmag competence brand already offers high precision flow control related components, including a large selection of gear metering pumps for textile and non-textile markets. These highly efficient pumps are used in silicone casting, dynamic mixing and oil spraying for the chemical, paint, polymer processing and automotive industries. This double-digit million CHF business, which has grown in recent years, will be merged with INglass’ HRSflow hot runner technologies under the new business unit Flow Control Solutions. HRSflow’s excellent market access to many OEMs in and outside the automotive industry brings significant growth opportunities.

INglass is a leader in automotive and expanding in other sectors

INglass S.p.A. is an internationally operating successful company established in 1987. Its product portfolio includes hot runners as well as engineering and consultancy services for the advanced development of polymer processing products. INglass’ HRSflow hot runner systems are applied in multiple industries from automotive, consumer goods and household appliances to packaging, waste management, construction and transportation.

INglass is headquartered in San Polo di Piave, Italy, near Venice. 2020 revenues of INglass were approximately CHF 135 million and the acquisition is expected to be immediately accretive to Oerlikon’s margins and cash flows. INglass has more than 1 000 employees and 55 sites worldwide, including production plants in Italy, China and the US. Among these sites are INglass’ newly renovated headquarters and production at its primary location in San Polo di Piave near Venice, Italy. The investment modernized the facilities with automated production, underlining the company’s commitment to sustainability and the environment. The other two modern production sites are in Zhejiang (Hangzhou Province) in China and Michigan (Grand Rapids) in the USA.

Following the integration with Oerlikon Barmag’s gear metering pumps business of about 200 employees in Remscheid, Germany, the new Flow Control Solutions business unit will have round about 1 200 employees.

"We see great potential for growth in our new Flow Control Solutions business unit,” said Georg Stausberg, Polymer Processing Solutions Division CEO and Member of the Executive Committee of the Oerlikon Group. “The businesses form the two core growth pillars and benefit from each other in global market development, in modern and digitized production, and in customer services. We also see potential synergies in R&D by combining existing know-how in the field of polymer processing. New technological solutions between hot runner systems and gear metering pumps are conceivable. We also anticipate collaborating more closely with the Oerlikon Surface Solutions Division, particularly in future mobility applications and functional polymer component solutions for the automotive industry. All in all, we will offer our customers innovative and attractive solutions in the field of polymer processing and high precision flow control components.”

Next steps for further diversification of the division product portfolio are already ongoing

Combining the divisions plant engineering and process know how with expertise on high precision flow control components technologies has a significant impact on product quality in nearly all applications, which opens up a platform for further organic and inorganic growth. "We are closely observing the megatrends in the markets and developing new business models to match. In the area of sustainability, covering topics such as circular economy, the recycling of materials using mechanical and chemical recycling solutions, as well as the handling of new, more environmentally friendly and biodegradable materials, we are on the verge of a breakthrough. We are ready to actively participate in these growth areas,” added Georg Stausberg.

“In realigning the Polymer Processing Solutions Division, Oerlikon will continue to apply our successful recipe of a lean organizational structure to efficiently manage the business. This means clear processes, short decision-making paths and competent teams in a diverse and multicultural organization in which everyone can contribute innovatively to create customer value,” said Georg Stausberg.

Oerlikon: Manual lever (c) Oerlikon
26.11.2020

Oerlikon: Manual lever now even more ergonomic

Finer adjustment of the yarn suction force, lower compressed air consumption for the same yarn tension, smooth, ergonomic compressed-air valve – all promises fulfilled by the modernized AS H 32 and AS H 38 yarn suction devices.

Also known as hand injectors, these yarn suction devices are standard components of all spinning positions. The AS H 32- and AS H 38-series are high-performance hand injectors with lower compressed air consumption for the same yarn tension. This is made possible due to the higher yarn suction forces, particularly in the case of the AS H 38 series. In addition to this, string-up without ‘ramp-up’ is possible in certain applications. Also new is a smoother, more ergonomic compressed-air valve, which makes deploying the yarn suction devices more comfortable for users. Furthermore, the required yarn suction force can be adjusted more finely.

The new ‘high-performance devices’ have been designed for applications that require a particularly high suction performance. For several months now, they have been successfully operating in pilot projects within the context of a BCF yarn application in Europe and a tape yarn system located in the US.

Finer adjustment of the yarn suction force, lower compressed air consumption for the same yarn tension, smooth, ergonomic compressed-air valve – all promises fulfilled by the modernized AS H 32 and AS H 38 yarn suction devices.

Also known as hand injectors, these yarn suction devices are standard components of all spinning positions. The AS H 32- and AS H 38-series are high-performance hand injectors with lower compressed air consumption for the same yarn tension. This is made possible due to the higher yarn suction forces, particularly in the case of the AS H 38 series. In addition to this, string-up without ‘ramp-up’ is possible in certain applications. Also new is a smoother, more ergonomic compressed-air valve, which makes deploying the yarn suction devices more comfortable for users. Furthermore, the required yarn suction force can be adjusted more finely.

The new ‘high-performance devices’ have been designed for applications that require a particularly high suction performance. For several months now, they have been successfully operating in pilot projects within the context of a BCF yarn application in Europe and a tape yarn system located in the US.

Source:

Oerlikon

Oerlikon: Meltblown und Spunbond (c) Oerlikon
19.11.2020

Oerlikon: Meltblown and Spunbond technologies

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Since the outbreak of the coronavirus pandemic, the worldwide demand for protective masks and apparel has resulted in a record number of new orders in the high double-digit millions of euros at Oerlikon Nonwoven. The meltblown technology from Neumünster is recognized by the market as being one of the technically most efficient methods for producing highly-separating filter media made from plastic fibers.

Protective equipment demands high-end nonwoven products
The rising demand for protective masks and other medical protective equipment since the start of the coronavirus pandemic and the associated global ramping up of production capacities has also resulted in an increase in the demand for nonwovens for the production thereof. Initially, this resulted in bottlenecks in the provision of meltblown filter nonwovens. To this end, there had until this point be very few producers of medical filter nonwovens outside China. Meanwhile, the demand for spunbond systems is also rising. “Due to the structure of our group, we are in the fortunate position to swiftly reallocate and free up our production capacities. This means that we are able to relatively quickly deliver not only meltblown systems, but also spunbond equipment”, explains Dr. Ingo Mählmann, Head of Sales & Marketing at Oerlikon Nonwoven, talking about the positive situation at the company.

The capacities for respiratory masks available in Europe to date are predominantly manufactured on Oerlikon Nonwoven systems. “Our machines and systems for manufacturing manmade fiber and nonwovens solutions enjoy an outstanding reputation throughout the world. Ever more manufacturers in the most diverse countries are hoping to become independent of imports”, comments Dr. Mählmann. The Oerlikon Nonwoven meltblown systems are being delivered to Germany, China, Turkey, United Kingdom, South Korea, Italy, France, North America and – for the very first time – to Australia until well into 2021.

Quality and efficiency in demand
Depending on the purpose of the application, medical PPE (personal protection equipment) should be breathable and comfortable to wear, protect medical staff against viruses, bacteria and other harmful substances and form a barrier against liquids. For these reasons, they are often made of either pure spunbond or of spunbond-meltblown combinations. Here, the meltblown nonwoven core assumes the barrier or filter task, while the spunbond has to retain its shape, while being tear-resistant, abrasion-proof, absorbent, particularly flame-resistant and nevertheless extremely soft on the skin.

All masks are not created equal – thanks to the ecuTEC+
Protection against infections such as coronavirus can only be guaranteed with the right quality.

The nonwovens can be electrostatically-charged in order to further improve the filter performance without additionally increasing breathing resistance. Here, Oerlikon Nonwovenʼs patented ecuTEC+ electro-charging unit excels in terms of its extreme flexibility. Nonwovens manufacturers can freely choose between numerous variation options and set the optimal charging method and intensity for their specific applications. In this way, even the smallest particles are still attracted and reliable separated by a relatively open-pored nonwoven. Nevertheless, mask wearers are still able to easily breathe in and out due to the comparatively loose formation of the fibers. To this end, it comes as no surprise that all meltblown systems currently destined for the production of mask nonwovens are equipped with the ecuTEC+ unit.

Pump components made from zirconium oxide ceramic (c) Oerlikon
Pump components made from zirconium oxide ceramic
12.11.2020

Oerlikon: Robust pumps for sophisticated special fibers

At first glance, rowing boats, the Airbus 380, safety equipment and stadium roofing have very little on common. They receive their specific properties as a result of the use of special fibers, among other things: aramid fibers and carbon fibers are processed into special yarns that are frequently deployed as compound materials. These fibers are growing in demand as the world seeks to reduce its reliance on fossil fuels; new solutions are required to reduce weight and replace heavy metallic parts.

Aramid fibers are produced in a highly-chemical process that is extremely aggressive; the acrylic precursor used to manufacture carbon fibers is a different process, but again no less difficult. In these sophisticated processes, the gear metering pumps are not only responsible for the high-precision control of the melt transport; durability, resistance within aggressive environments and cost efficiency also play decisive roles.

At first glance, rowing boats, the Airbus 380, safety equipment and stadium roofing have very little on common. They receive their specific properties as a result of the use of special fibers, among other things: aramid fibers and carbon fibers are processed into special yarns that are frequently deployed as compound materials. These fibers are growing in demand as the world seeks to reduce its reliance on fossil fuels; new solutions are required to reduce weight and replace heavy metallic parts.

Aramid fibers are produced in a highly-chemical process that is extremely aggressive; the acrylic precursor used to manufacture carbon fibers is a different process, but again no less difficult. In these sophisticated processes, the gear metering pumps are not only responsible for the high-precision control of the melt transport; durability, resistance within aggressive environments and cost efficiency also play decisive roles.

Special materials for special tasks
The process, the expected pump lifespan and the maintenance frequency are the decisive factors for choosing the materials from which the pumps and their components are manufactured. For optimum results, Oerlikon Barmag offers solutions that intelligently combine the various materials and the latest technologies. Whether in the case of surfaces with ceramic coatings, gears and shafts featuring DLC coatings, pumps made from cobalt alloys (StelliteTM) or robust and durable Oerlikon Barmag hybrid constructions comprising zirconium oxide ceramic and duplex stainless steel – the high-precision ZP- and GM-series pumps are design-optimized depending on the intended use. Various seal systems and customized drive concepts round off the pump program.

Source:

Oerlikon

Oerlikon (c) Oerlikon
29.10.2020

Oerlikon: Less waste with the Smart Factory

A typical manmade fiber system produces well over 600 tons of yarn a day. This equals in around 700 winders in filament yarn production or 3 systems in staple fiber production. These figures show just how important smooth production processes are.

If an error creeps into the process at any point, the daily waste increases dramatically. It is obvious that all yarn manufacturers want to prevent this happening to ensure their production facilities operate efficiently. Here, digitalization provides invaluable support. A Smart Factory that networks all steps within the production chain – including all auxiliary processes – identifies and reports quality deviations at an early stage. Yarn manufacturers can quickly intervene in the production process and hence avoid generating waste.

A typical manmade fiber system produces well over 600 tons of yarn a day. This equals in around 700 winders in filament yarn production or 3 systems in staple fiber production. These figures show just how important smooth production processes are.

If an error creeps into the process at any point, the daily waste increases dramatically. It is obvious that all yarn manufacturers want to prevent this happening to ensure their production facilities operate efficiently. Here, digitalization provides invaluable support. A Smart Factory that networks all steps within the production chain – including all auxiliary processes – identifies and reports quality deviations at an early stage. Yarn manufacturers can quickly intervene in the production process and hence avoid generating waste.

Digital solutions ensures process reliability
And the Smart Factory is also the focus of Oerlikon Manmade Fibers. Here, it comprises considerably more than the Plant Operation Center, a system that has been well-established within the market for many years now. “This is about absolute transparency and traceability. At the end of the process, yarn manufacturers are able to track at which position its finished textured yarn packages were spun and even have information on the processed granulate and the specific production conditions”, comments Ivan Gallo, responsible for digital products at Oerlikon Manmade Fiber. In this way, the Smart Factory ensures process reliability, above all. The data are automatically entered into the system and the product assessed at each stage of yarn production at which values and data are recorded – such as during visual inspection and when weighing. In the event of anomalies in the intermediate laboratory and quality checks, this allows yarn producers to intervene in the production process and correct these anomalies.

Information on the chip feeding, on the drying and on the masterbatch are available, as are data on the climate control, on the compressed air supply and on further auxiliary systems. With this, yarn manufacturers have at all times a complete overview of the ongoing production process, including comprehensive information on quality and production costs.

Source:

Oerlikon

Erstklassige Wischtücher mit Phantom-Technologie (c) Oerlikon Manmade Fibers
Phantom technology enables greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials.
22.10.2020

First class wipes with Phantom technology

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

Neumünster – Success is built by connecting the right people with the right product. In a global marketplace, this means collaboration is just as important as competition. Companies need to focus on their strengths, while finding practical ways to innovate and expand upon their capabilities.

An exclusive license from Procter & Gamble offers the best for nonwovens

In order to do so, working together often makes the most sense. This is what motivated Procter & Gamble and Oerlikon Nonwoven – Teknoweb Materials to agree on an exclusive license agreement to market and sell the Phantom platform worldwide.

The patented process for hybrid nonwovens combines the best of both airlaid and spunmelt technologies to deliver new, flexible ways of creating wet and dry wipes. Phantom technology offers additional benefits by reducing resources and cost, while increasing overall performance. The exclusive license gives Oerlikon Nonwoven – Teknoweb Materials distribute this technology worldwide. In addition, Oerlikon Nonwoven – Teknoweb Materials have further refined the process into their own Levra technology – an entry-level option which offers tailored production volumes with lower investment costs but is still suitable to be upgraded to the premium Phantom model in the future.

Quality products that cost less

Essentially, Phantom technology was developed to produce hybrid substrates. The spunmelt and airlaid processes are merged into one step to combine cellulose fibers, long fibers such as cotton, or even powders with polymer fibers in unprecedented ways. This technology has clear advantages in terms of resources, performance, and cost compared to the previous processes on the market. By removing hydroentanglement, it is no longer necessary to dry the material. Adjusting the process can optimize relevant product characteristics such as softness, strength, dirt absorption, and liquid absorption. In the end, this even increases the quality of the product itself.

The greater freedom for formulating continuous and discrete fibers allows for more flexible and absorbent structures and highly textured materials. Wipes feel softer to the touch while providing more protection for the hands. Up to 90% of the material can consist of pulp fibers, although natural alternatives like cotton or synthetic fibers can be added to the mix.

Phantom technology has not only found a practical application in a variety of wipes – such as hygiene wipes, anti-bacterial wipes, surgical wipes, or industrial wipes – but also in absorbent cores, for instance indiapers or fempro products. With so many applications, Oerlikon Nonwoven – Teknoweb Materials are fully prepared to deliver Procter & Gamble’s innovative Phantom technology to the global nonwovens market.

Source:

Oerlikon Manmade Fibers

Oerlikon: (c) Oerlikon
v.l.n.r. Jochen Adler, Ralf Morgenroth, Markus Reichwein, Matthias Schmitz
15.10.2020

Oerlikon Experten teilen ihr Know-how online

Um den Know-how- und Technologietransfer in Zeiten der Corona Pandemie weiterhin sicherzustellen, startet das Segment Manmade Fibers des Schweizer Oerlikon Konzerns ab November seine neue Webinar Serie. In den bis Ende 2020 zunächst geplanten vier interessanten Technologievorträgen in englischer Sprache werden aktuelle Trends bei der Produktion von Chemiefasern betrachtet sowie Oerlikons Lösungen dazu präsentiert und mit den Teilnehmern diskutiert. Eine Fortsetzung der Webinar Serie für 2021 ist bereits in Arbeit.

Um den Know-how- und Technologietransfer in Zeiten der Corona Pandemie weiterhin sicherzustellen, startet das Segment Manmade Fibers des Schweizer Oerlikon Konzerns ab November seine neue Webinar Serie. In den bis Ende 2020 zunächst geplanten vier interessanten Technologievorträgen in englischer Sprache werden aktuelle Trends bei der Produktion von Chemiefasern betrachtet sowie Oerlikons Lösungen dazu präsentiert und mit den Teilnehmern diskutiert. Eine Fortsetzung der Webinar Serie für 2021 ist bereits in Arbeit.

  • Factory know-how from a single source – A boost for your efficiency
    4. November 2020: 11:00-11:45h CET
    Redner: Jochen Adler, Oerlikon Manmade Fibers CTO*
  • VarioFil – Your compact spinning solution
    11. November 2020: 11:00-11:45h CET
    Redner: Ralf Morgenroth, Head of Engineering Textile Machinery BB Engineering (BBE)*
  • Green Technologies – Join us on the road to a sustainable fiber industry
    2. December 2020: 11:00-11:45h CET
    Redner: Markus Reichwein, Head of Product Management Oerlikon Manmade Fibers*
  • VacuFil – Your future upcycling plant, from waste to value
    9. December 2020: 11:00-11:45h CET
    Redner: Matthias Schmitz, Head of Engineering Recycling Technology, BB Engineering (BBE)*

 

*Weitere Informationen im Anhang

 

Source:

Oerlikon Textile GmbH & Co. KG

Oerlikon (c) Oerlikon
f.l.t.r Jochen Adler, Ralf Morgenroth, Markus Reichwein, Matthias Schmitz
15.10.2020

Oerlikon Experts share their know-how online

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

In order to ensure the transfer of know-how and technology in times of the pandemic, the Manmade Fibers segment of the Swiss Oerlikon Group will start its new webinar series in November. Four interesting technology lectures are planned until the end of 2020 which will be held in English. Current trends in the production of manmade fibers as well as Oerlikons technology solutions will be presented and discussed with the participants. A continuation of the webinar series is already planned for 2021.

  • Factory know-how from a single source – A boost for your efficiency
    4. November 2020: 11:00-11:45h CET
    Speaker: Jochen Adler, Oerlikon Manmade Fibers CTO*
     
  • VarioFil – Your compact spinning solution
    11. November 2020: 11:00-11:45h CET
    Speaker: Ralf Morgenroth, Head of Engineering Textile Machinery BB Engineering (BBE)*
     
  • Green Technologies – Join us on the road to a sustainable fiber industry
    2. December 2020: 11:00-11:45h CET
    Speaker: Markus Reichwein, Head of Product Management Oerlikon Manmade Fibers*
     
  • VacuFil – Your future upcycling plant, from waste to value
    9. December 2020: 11:00-11:45h CET
    Speaker: Matthias Schmitz, Head of Engineering Recycling Technology, BB Engineering (BBE)*

 

*Please read the attached document for more information

Source:

Oerlikon Textile GmbH & Co. KG

Oerlikon: Virtual Exhibition (c) Oerlikon
08.10.2020

Oerlikon at Innovate Textile & Apparel Virtual Trade Show

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

The textile machinery industry is eagerly awaiting the start of the virtual trade show "Innovate Textile & Apparel". What and how will the more than 160 exhibitors present themselves virtually? How will the approximately 10,000 registered visitors accept the digital offer? WTIN is breaking new ground as organizer with this platform. But one thing is already certain: From 15 to 30 October 2020, they will bring the textile machinery industry a little closer together again in the Corona Pandemic. Oerlikon invites all visitors to take a look into the future of manmade fibers production and get to know the comprehensive range of products and services.

"Reconnecting innovation in the textile & apparel value chain" is the motto of WTIN's virtual trade show. And Oerlikon intends to more than live up to this motto. With more than 50 active experts from sales, customer service and technology as well as partners from its international network of representatives, the Manmade Fibers segment of the Swiss Oerlikon Group will try to be represented around the clock. "It is an interesting experiment for all of us and we would like to see it succeed," explains André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. "Our aim is to meet our existing customers again, make new contacts and see 'old friends' from the industry. We have prepared an attractive digital offer for them all. Those of you who missed our roller coaster ride in Barcelona last year can now enjoy the journey through time in peace and quiet from your home office on your digital tour of the fair. And, there are no more waiting times either," promises Wissenberg.

Factory know-how from a single source
From Melt to Yarn, Fibers and Nonwovens. From the polycondensation and the processing of PTA and MEG as well as the extrusion of, for example, recycled polyester chips all the way through to hundreds of thousands of packaged and stored or directly-delivered textured bobbins for a market within the textile industry worth billions. From the planning and construction of highly complex production plants to the engineering of large-scale plant projects and competent customer services. This business model runs like a red thread through the self-conception of the Manmade Fibers segment of the Swiss Oerlikon Group. The right partner, especially – but not exclusively – for newcomers to the textile industry. "With us they get everything they need for a successful business: Factory know-how from a single source. And that's what we would like to show our visitors at our virtual trade fair booth," says Wissenberg.

Oerlikon: Virtual Exhibition (c) Oerlikon
08.10.2020

Oerlikon bei virtueller Messe „Innovate Textile & Apparel“

Mit Spannung erwartet die Textilmaschinenindustrie in diesen Tagen den Start der virtuellen Messe „Innovate Textile & Apparel“. Was und wie werden sich die über 160 Aussteller virtuell präsentieren? Wie werden die bis lang rund 10.000 angemeldeten Besucher das digitale Angebot annehmen? WTIN geht als Organisator mit dieser Plattform neue Wege. Eins steht dabei jetzt aber schon fest: In der Zeit vom 15. bis 30. Oktober 2020 bringen sie die Textilmaschinenindustrie in der Corona Pandemie wieder etwas näher zusammen. Oerlikon lädt dabei alle Besucher ein, einen Blick in die Zukunft der Chemiefaserproduktion zu werfen und das umfassende Produkt- und Serviceangebot kennenzulernen.

Mit Spannung erwartet die Textilmaschinenindustrie in diesen Tagen den Start der virtuellen Messe „Innovate Textile & Apparel“. Was und wie werden sich die über 160 Aussteller virtuell präsentieren? Wie werden die bis lang rund 10.000 angemeldeten Besucher das digitale Angebot annehmen? WTIN geht als Organisator mit dieser Plattform neue Wege. Eins steht dabei jetzt aber schon fest: In der Zeit vom 15. bis 30. Oktober 2020 bringen sie die Textilmaschinenindustrie in der Corona Pandemie wieder etwas näher zusammen. Oerlikon lädt dabei alle Besucher ein, einen Blick in die Zukunft der Chemiefaserproduktion zu werfen und das umfassende Produkt- und Serviceangebot kennenzulernen.

“Reconnecting innovation in the textile & apparel value chain” ist das Motto der virtuellen Messe von WTIN. Und Oerlikon will dem mehr als gerecht werden. Mit über 50 aktiven Experten aus Verkauf, Kundenservice und Technologie sowie Partnern seines internationalen Vertreternetzwerkes wird das Segment Manmade Fibers der Schweizer Oerlikon Gruppe versuchen, rund um die Uhr vertreten sein. „Es ist für uns alle ein interessantes Experiment, das wir gern erfolgreich umsetzen möchten“, erklärt André Wissenberg, Head of Marketing, Corporate Communications and Public Affairs. „Unsere bestehenden Kunden auf diesem Weg wiederzusehen, neue Kontakte zu knüpfen und ,alte Freunde‘ aus der Branche zu treffen ist unser Ziel. Wir haben ein attraktives digitales Angebot für sie alle vorbereitet. Denn wer im letzten Jahr unseren Rollercoaster-Ride in Barcelona verpasst hat, kann die Zeitreise nun auf seinem digitalen Messerundgang in aller Ruhe aus dem Homeoffice heraus bei uns genießen. Und, es gibt hierbei auch keine Wartezeiten mehr“, verspricht Wissenberg.

Fabrik-Know-how aus einer Hand
Von der Schmelze zum Garn, Fasern und Vliesstoffen. Von der Polykondensation und der Verarbeitung von PTA und MEG sowie der Extrusion von z.B. recycelten Polyesterchips bis hin zu Hunderttausenden von verpackten und gelagerten oder direkt ausgelieferten texturierten Spulen für einen milliardenschweren Markt innerhalb der Textilindustrie. Von der Planung und dem Bau hochkomplexer Produktionsanlagen über das Engineering von Großanlagenprojekten bis hin zu kompetenten Kundendienstleistungen. Dieses Geschäftsmodell zieht sich wie ein roter Faden durch das Selbstverständnis des Manmade Fibers Segments des Schweizer Oerlikon Konzerns. Der richtige Partner, insbesondere – aber nicht ausschließlich – für Neueinsteiger in der Textilindustrie. „Bei uns bekommen sie alles, was sie für ein erfolgreiches Geschäft brauchen: Fabrik-Know-how aus einer Hand. Und das würden wir unseren Besuchern gern auf unserem virtuellen Messestand zeigen“, sagt Wissenberg.

Oerlikon Barmag: Wiping robot (c) Oerlikon Barmag
01.10.2020

Oerlikon Barmag: Wiping robots increase production efficiency

Retrofitting a wiping robot to spinning systems is well worthwhile. This is confirmed by the experiences of those customers who have already installed the wiping robot. Oerlikon Barmag wiping robots have been cleaning spin packs at filament yarn manufacturing facilities in China and India for several months now, increasing efficiency considerably.

Regular wiping of the spin packs is important for process stability and yarn quality. These can be positively influenced using wiping robots, because – as confirmed by data acquisition and analysis at the respective manufacturing facilities – the yarn break rate can be reduced by up to 30% by automating the wiping process. And the yarn break rate has a direct impact on the key production figures; to this end, a considerable reduction translates into pure profit for yarn manufacturers.

Retrofitting a wiping robot to spinning systems is well worthwhile. This is confirmed by the experiences of those customers who have already installed the wiping robot. Oerlikon Barmag wiping robots have been cleaning spin packs at filament yarn manufacturing facilities in China and India for several months now, increasing efficiency considerably.

Regular wiping of the spin packs is important for process stability and yarn quality. These can be positively influenced using wiping robots, because – as confirmed by data acquisition and analysis at the respective manufacturing facilities – the yarn break rate can be reduced by up to 30% by automating the wiping process. And the yarn break rate has a direct impact on the key production figures; to this end, a considerable reduction translates into pure profit for yarn manufacturers.

Can also be retrofitted to existing systems
The Oerlikon Barmag wiping robot can be retrofitted to numerous spinning plants. Suspended from a track system mounted on the ceiling, the system automatically and autonomously targets the individual positions in accordance with the scheduled wiping cycles. In addition to the scheduled wiping processes, there are also events that cannot be planned or that are not immediately visible. Depending on the degree of integration into Oerlikon Manmade Fibers Smart Factory solutions, the wiping robot is able to identify issues such as yarn breaks or parallel wiping processes and to independently offer solutions.

The wiping robot operates in a cross-line manner. Here, the wiping quality remains constant 24/7. The high wiping quality has a positive influence on both the stability of the overall process and on the yarn quality. The time saved between cleaning cycles is a further advantage: using the robots, the interval between two wiping processes can be extended by up to 25%. The considerable increase in the spinning process efficiency achieved by the wiping robot also has a positive impact on margins. For example, one customer deploying the wiping robot was able to reduce its production costs for the same yarn by more than 3%.

More information:
Oerlikon Barmag filament yarn
Source:

Oerlikon

Oerlikon Barmag: Schaberoboter (c) Oerlikon Barmag
01.10.2020

Oerlikon Barmag: Schaberoboter erhöhen Produktionseffizienz

Die Nachrüstung von Spinnanlagen mit einem Schaberoboter ist durchaus lohnenswert. Das bestätigen die Erfahrungen der Kunden, bei denen der Schaberoboter bereits installiert ist. Seit mehreren Monaten reinigen die Schaberoboter von Oerlikon Barmag Spinndüsen in Produktionsbetrieben für Filamentgarne in China und Indien mit dem Resultat einer deutlichen Effizienzsteigerung der Anlagen.

Das regelmäßige Schaben der Spinndüsen ist wesentlich für Prozessstabilität und Garnqualität. Mit dem Schaberoboter kann hier positiv Einfluss genommen werden, denn: wie die Datenerfassung und -analyse in den Betrieben bestätigt, kann die Fadenbruchrate durch die Automatisierung des Schabeprozesses um bis zu 30% reduziert werden. Die Fadenbruchrate nimmt einen direkten Einfluss auf die Produktionskennzahlen; insofern ist hier eine deutliche Reduktion für jeden Garnhersteller bares Geld.

Die Nachrüstung von Spinnanlagen mit einem Schaberoboter ist durchaus lohnenswert. Das bestätigen die Erfahrungen der Kunden, bei denen der Schaberoboter bereits installiert ist. Seit mehreren Monaten reinigen die Schaberoboter von Oerlikon Barmag Spinndüsen in Produktionsbetrieben für Filamentgarne in China und Indien mit dem Resultat einer deutlichen Effizienzsteigerung der Anlagen.

Das regelmäßige Schaben der Spinndüsen ist wesentlich für Prozessstabilität und Garnqualität. Mit dem Schaberoboter kann hier positiv Einfluss genommen werden, denn: wie die Datenerfassung und -analyse in den Betrieben bestätigt, kann die Fadenbruchrate durch die Automatisierung des Schabeprozesses um bis zu 30% reduziert werden. Die Fadenbruchrate nimmt einen direkten Einfluss auf die Produktionskennzahlen; insofern ist hier eine deutliche Reduktion für jeden Garnhersteller bares Geld.

Auch in bestehenden Anlagen nachrüstbar
Der Schaberoboter von Oerlikon Barmag ist vielen Spinnereien nachrüstbar. An einem Schienensystem an der Decke hängend steuert das System die einzelnen Positionen entsprechend der geplanten Schabezyklen automatisch und selbständig an. Neben geplanten Schabevorgängen gibt es aber auch Ereignisse, die nicht direkt planbar oder sichtbar sind. So kann der Schaberoboter, je nach Einbindungsgrad in Oerlikon Manmade Fibers Smart Factory Lösungen, Konflikte wie Fadenbrüche oder parallele Schabevorgänge erkennen und selbstständig Lösungen anbieten.

Der Schaberoboter arbeitet linienübergreifend. Dabei bleibt die Schabequalität 24/7 konstant. Durch die hohe Schabequalität wird sowohl die Stabilität des gesamten Prozesses als auch die Garnqualität positiv beeinflusst. Zeitersparnis zwischen den Reinigungszyklen ist ein weiterer Vorteil: mit Einsatz des Roboters kann das Zeitintervall zwischen zwei Schabevorgängen um bis zu 25% verlängert werden. Die durch den Schaberoboter erreichbare deutliche Effizienzsteigerung der Spinnprozesse schlägt sich auch in der Marge nieder. So sanken zum Beispiel bei einem Kunden mit Einsatz des Schaberoboters die Produktionskosten für das gleiche Garn um mehr als 3%.

Source:

Oerlikon

VacuFil (c) Oerlikon
24.09.2020

Recycling rückt in den Fokus

Müllberge, plastikverseuchte Meere, CO2 Footprint – die Notwendigkeit einer nachhaltigeren Lebensweise ist alternativlos. Logisch, dass Recycling Lösungen in der Textilindustrie zunehmend an Bedeutung gewinnen. Aufgegriffen hat das auch der erste virtuelle Global Fiber Congress in Dornbirn mit einer eigens auf das Thema fokussierten Session. Vor rund 400 Teilnehmern referierte auch Markus Reichwein, Leiter Produktmanagement bei Oerlikon Manmade Fibers, zu auf dem Markt verfügbaren Lösungen.

Als einer der einzigen Hersteller bietet das Segment Manmade Fibers des Oerlikon Konzerns die gesamte Kette des mechanischen Recylings von der Aufbereitung des Rezyklats zur Schmelze bis hin zur texturierten Spule. Dabei greift das Unternehmen auf die VacuFil Lösung seines Tochterunternehmens Barmag Brückner Engineering (BBE) zurück, die neben bottle-to-bottle und bottle-to-textile Prozessen auch die Verarbeitung von textilen Abfällen zu Chips beherrscht. Damit wird der Betrieb von Textilproduktionen im Sinne der Zero Waste Philopsophie möglich.

Müllberge, plastikverseuchte Meere, CO2 Footprint – die Notwendigkeit einer nachhaltigeren Lebensweise ist alternativlos. Logisch, dass Recycling Lösungen in der Textilindustrie zunehmend an Bedeutung gewinnen. Aufgegriffen hat das auch der erste virtuelle Global Fiber Congress in Dornbirn mit einer eigens auf das Thema fokussierten Session. Vor rund 400 Teilnehmern referierte auch Markus Reichwein, Leiter Produktmanagement bei Oerlikon Manmade Fibers, zu auf dem Markt verfügbaren Lösungen.

Als einer der einzigen Hersteller bietet das Segment Manmade Fibers des Oerlikon Konzerns die gesamte Kette des mechanischen Recylings von der Aufbereitung des Rezyklats zur Schmelze bis hin zur texturierten Spule. Dabei greift das Unternehmen auf die VacuFil Lösung seines Tochterunternehmens Barmag Brückner Engineering (BBE) zurück, die neben bottle-to-bottle und bottle-to-textile Prozessen auch die Verarbeitung von textilen Abfällen zu Chips beherrscht. Damit wird der Betrieb von Textilproduktionen im Sinne der Zero Waste Philopsophie möglich.

VacuFil sorgt für stabilen Prozess recycelter Qualitätsgarne
Wesentlich für einen stabilen und effizienten Spinnprozess und ausgezeichneter Garnqualität ist die zuverlässige Entfernung von Verunreinigungen. Gleichzeitig sind stabile Betriebsbedingungen mit möglichst minimalen Schwankungen essentiell. Die größte Herausforderung hierbei sind die unterschiedlichen Qualitäten der eingespeisten bottle flakes, da der Extrusionsprozess diese Schwankungen kaum ausgleichen kann. Hier steuert das VacuFil Konzept mit Mischsilos gegen. Damit werden die Unterschiede in der Viskosität der Polymere deutlich reduziert, so dass eine hohe Garn- und Gewebequalität garantiert ist.

Das VacuFil Konzept ist einer POY-Anlage von Oerlikon Barmag vorgeschaltet, die mit der rezyklierten Schmelze gewohnt hochwertiges Filamentgarn produziert. Als Texturierungslösungen bietet Oerlikon Barmag seine modernsten Anlagen der automatischen eAFK-Serie an, darunter auch die neueste Generation der eAFK Evo, die letztes Jahr auf der ITMA Barcelona vorgestellt wurde. Garnhersteller, die weiterhin manuell texturieren möchten, können auf die eFK-Serie zurückgreifen.

Mit VarioFil R+ steht Herstellern kleinerer Chargen zudem eine Kompaktanlage mit integrierter Rezyklataufbereitung zur Verfügung. Die Anlage bietet ein spezielles Extrusionssystem für Bottle-Flake Materialien, die neueste Dosier-und Mischtechnologie für Spinnfärben und eine erweiterte 2-Stufen-Schmelzefiltration. Die vier Spinnpositionen sind jeweils mit einem Oerlikon Barmag 10-end WINGS POY Wickler bestückt.

Ist das mechanische Recycling bereits sehr ausgereift, stellt das chemische Recycling für Mischgewebe die Textilindustrie noch vor große Herausforderungen. An Lösungen und Konzepten, aus diesen Geweben neue Textilien gewinnen zu können, arbeitet das Segment Manmade Fibers des Oerlikon Konzerns.

Source:

Oerlikon