From the Sector

Reset
2 results
(c) FONG’s Europe
07.06.2023

Fong’s Europe: THEN hydraulic round shape developments at ITMA 2023

Fong’s Europe will showcase the advanced features of its THEN Smartflow TSF at ITMA 2023.

These include the machine’s smart fabric transport system which ensures extremely even dyeing of the fabric through accurate control of the nozzle pressure and pump power, with movement through the machine via an PLC-controlled plaiting system and variable chamber adjustment depending on fabric characteristics.

The machine is equipped with a heat exchanger enabling it to heat the dyeing liquor quickly and efficiently, to reduce energy consumption. Its bath preparation unit and chemical dosing system ensure accurate and precise dosing of chemicals, dyestuff and salt, reducing chemical waste and optimising results while reducing process times.

The Smartflow TSF operates with a low liquor ratio of down to 1:2.5 with full loading of synthetic fabrics, which means that it requires less water to dye a given amount of fabric compared to traditional dyeing machines. This not only reduces the consumption of water and steam, but also the amount of wastewater generated.

Fong’s Europe will showcase the advanced features of its THEN Smartflow TSF at ITMA 2023.

These include the machine’s smart fabric transport system which ensures extremely even dyeing of the fabric through accurate control of the nozzle pressure and pump power, with movement through the machine via an PLC-controlled plaiting system and variable chamber adjustment depending on fabric characteristics.

The machine is equipped with a heat exchanger enabling it to heat the dyeing liquor quickly and efficiently, to reduce energy consumption. Its bath preparation unit and chemical dosing system ensure accurate and precise dosing of chemicals, dyestuff and salt, reducing chemical waste and optimising results while reducing process times.

The Smartflow TSF operates with a low liquor ratio of down to 1:2.5 with full loading of synthetic fabrics, which means that it requires less water to dye a given amount of fabric compared to traditional dyeing machines. This not only reduces the consumption of water and steam, but also the amount of wastewater generated.

The machine's control panel is easy to use, allowing operators to programme and monitor processes with ease.

Source:

FONG’s Europe

(c) Fong’s Europe GmbH
25.03.2019

FONG’S EUROPE celebrates the 100th anniversary of its flagship THEN brand at ITMA

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

FONG’S EUROPE, based in Schwäbisch Hall, Germany, will celebrate the 100th anniversary of its flagship THEN brand for advanced dyeing technology with a special reception for customers and agents at ITMA 2019 in Barcelona.

The company, which has been a member of the CHTC FONG’S group since 2004, has its origins in the German city of Chemnitz, where back in 1919 Rudolf Then founded a barrel-making business which soon branched out into piece dyeing machines.

The company’s reputation for innovation began early, with the introduction of ceramic linings for dye baths, which were then made of wood, in order to avoid staining and allow easy cleaning. At the end of the 1920s, Rudolf Then was also quick to recognise the acid-resistant advantages of stainless steel for dyeing vessels.

Relocating to West Germany after World War 2, Rudolf Then ran a number of businesses in Schwäbisch Hall, eventually founding THEN in 1955 with partner Karl Kurz, who later took over the business specialising in dye vats and other textile equipment.

Throughout the 1960s and 70s, the company continued to further improve its technologies, but it was the introduction of the first THEN AIRFLOW system at ITMA 1983 in Milan which significantly boosted the company’s fortunes, representing a milestone in the development of dyeing machines.

Prior to this, the dyeing of just one kilo of fabric required around 150 litres of water and THEN’s AIRFLOW system, invented by engineer Wilhelm Christ and colleagues, drastically reduced the requirement to between just 35-40 litres. Instead of the traditional dye liquor used for hydraulic fabric transport it efficiently distributed much smaller amounts of dye liquor via aerosol. This technology has subsequently been further developed in successive machine models and has made an enormous impact on sustainable dyeing operations.

Now, as FONG’S EUROPE, the company continues to innovate, and at ITMA 2019 is showcasing the THEN SMARTFLOW TSF hydraulic high temperature dyeing machine, designed to achieve the lowest possible energy and water consumption rates available on the market for jet dyeing.

The company has a number of patents pending on the innovative new features of this machine, including the SMARTFLOW’s fabric transport design. This is based on a smart, winchless fabric transport system which eliminates the need for a loading rope, and a circular plaiter with programmable rotation speeds which provides full filling of the drop zone.

Its newly-developed nozzles and reel-less transport, in combination with smart controlled circular plaiting and variable chamber adjustment, provide even fabric treatment without entanglements and the highest loading capacity with the lowest kier volume

“Further developments, including the new THEN AIRFLOW PLUS system with a round design are in the development pipeline and will once again result in further reductions in power consumption without sacrificing performance,” says FONG’s Europe Sales Director Richard Fander. “Similar innovations are being made to our hydraulic long shape machine, the THEN SUPRATEC LTM. The ability to transport fabrics with reduced tension and without the need for a transport winch which is being introduced on all of our recent machines will allow new fabrics to be created and further increase the efficiency of textile finishing.

Fong’s Europe will be at stand D101 in Hall 2 at ITMA 2019.

More information:
Fong’s Europe GmbH
Source:

AWOL Media