From the Sector

Reset
147 results
 Radici: Mehr Nachhaltigkeit auf der Piste (c) RadiciGroup
Die RadiciGroup und DKB präsentieren den ersten „zirkulären“ Skianzug
01.12.2021

Radici: The sustainability our mountains deserve

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

  • RadiciGroup and DKB introduce the first “circular” ski suit
  • A garment made of yarn obtained from recycled materials and designed with end-of-life recyclability in mind, without compromising style, design and technical performance.
  • RadiciGroup Ski Club athletes will be the first ambassadors of this sustainability project

The first truly sustainable ski suit, featuring Italian style and design and a zero-kilometre supply chain, is finally here. Two Bergamo companies of excellence played the leading roles in the conception and realization of this highly innovative fashion-sport garment: RadiciGroup, a world leading producer of chemical intermediates, polyamide polymers, high-performance engineering polymers and advanced textile solutions, and DKB, a company specializing in technical sportswear with the same brand name.

The ski suit, consisting of jacket and trousers, is fashioned with a fabric made of RENYCLE, a RadiciGroup yarn obtained from mechanically recycled polyamide (nylon), which affords notable savings in energy and water consumption, as well as lower CO2 emissions. In addition, the suit’s padding and numerous accessories, such as zippers, Velcro, buttons and thread, are also made of polyamide.

This achievement was made possible by the great teamwork of RadiciGroup and DKB on the research and development of chemically compatible materials that can be used in special applications requiring high technical performance. The end result is an almost mono-material garment that significantly facilitates end-of-life recycling. It can be more easily converted into polymers for use in the manufacture of ski boot components and bindings, in addition to applications in the automotive and furnishing industries, or in any other sector requiring the characteristics of high performance polyamides.

The ski suit by RadiciGroup is thus an all-round application of ecodesign and circular economy principles to fashion and garment making, which justifies the claim “Una sostenibilità all’altezza delle nostre montagne” [Sustainability worthy of our mountains] written in a logo patch on the inside of the jacket.

“I am particularly proud of this achievement, a synthesis of my passion and effort,” said Angelo Radici, president of RadiciGroup. “I’ve always loved mountaineering and skiing, and, together with my collaborators, I work hard at our company day in and day out to find innovative solutions that improve the sustainability of our industry. This ski suit is concrete proof of the fact that textiles and apparel can be made sustainable without compromising on comfort, design, looks or performance. I will never get tired of repeating that collaboration among the firms along the production chain is crucial to manufacturing goods with an ecodesign approach, considering their end-of-life recyclability and, thus, potentially giving them unlimited durability. Upstream producers, like us, gladly share our know-how in materials chemistry and experience in recycling with our downstream partners, so that, together, we can find sustainable and viable solutions in the various sectors where we operate.”

Source:

RadiciGroup

(c) ANDRITZ
ANDRITZ Laroche textile recycling line
22.11.2021

ANDRITZ at Techtextil India 2021

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

International technology group ANDRITZ will present its innovative nonwovens and textile technologies at the booth of its Indian representative PRN Techtex at Techtextil India 2021 in Mumbai, India, from November 25 to 27, 2021. A special focus will lie on its technologies for air-through bonding, needlepunch, textile recycling, and processes for biodegradable wipes, like spunlace and WetlaceTM.

Air-through Bonding
Air-through-bonding lines are the preferred choice for producing nonwovens with the best quality of softness and bulk for acquisition distribution layers, top sheets, and back-sheet products. With ANDRITZ carding machines and the new flat belt oven, customers benefit from high-performance fabrics from 16 to 80 gsm, produced with bicomponent fibers. Several Chinese customers have already invested in ANDRITZ aXcess carding machines, which provide perfect web uniformity. In addition, the CETI (European Center for Innovative Textiles) in Lille, France, has installed an air-through-bonding oven from ANDRITZ.

Textil-recycling Technologies
Recently, ANDRITZ acquired Laroche SAS, a leading supplier of fiber processing technologies such as opening, blending, dosing, airlay web forming, textile waste recycling, and decortication of bast fibers. The product portfolio further complements and increases the ANDRITZ Nonwoven product range. One focus of this product range lies on complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end uses.

Needlepunch Technologies
Driven by the dynamic market for durable nonwovens, ANDRITZ has developed an elliptical pre-cylinder tacker – the PA3000. With this modern machine, ANDRITZ is responding to customer demands for higher capacities and lighter products. The PA3000 is an optimized cylinder pre-needleloom, which offers greater speeds and widths and has been specially developed for lighter webs. There is no friction between the web and the rolls, and there are no issues with the visual appearance.

ANDRITZ is also focusing on its latest needling technology for producing veloured felts, mainly for applications in the automotive industry.

In addition, ANDRITZ will be presenting the next generation of its batt-forming technology, the ProWin system. ProWin is a further development of ProDynTM and ProWidTM, which have achieved a high level of acceptance on the market with around 200 systems installed. This technology improves the current weight-profiling options and increases the actual production capacity.

Production of Bio-Wipes
For many years now, ANDRITZ has offered different nonwoven processes, such as spunlace and Wetlace, with one goal in mind: reduction and elimination of plastic raw materials while maintaining the high quality of the desired product properties. The latest development in this field is the ANDRITZ neXline wetlace CP line. This is a fully engineered production line, combining the benefits of wetlaid and drylaid technologies to produce a new generation of biodegradable wipes. This process achieves high performance entirely with plastic-free raw materials. The added benefit of using a blend of fibers, like wood pulp, short-cut cellulosic fibers, viscose, cotton, hemp, bamboo, or linen, without chemical additives, results in a 100% sustainable fabric.

15.11.2021

Autoneum: Flexi-Loft with high acoustic performance

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

The acoustic performance of components for the vehicle interior such as inner dashes or carpets depends on the noise-reducing quality as well as the geometrical adaptability and fill power of their material. With Flexi-Loft, Autoneum offers a new felt-based technology that thanks to a unique blend of recycled cotton and functional fibers reduces product weight and allows for accurate adaptation even to complex shapes. The textile material therefore provides a versatile and more sustainable alternative to foam.

In order to achieve high acoustic performance at minimum weight and maximum sustainability, Autoneum is continuously advancing its textile product portfolio. When it comes to components for the vehicle interior, for example, standard thermoplastic felts excel through their acoustic absorption, robustness and environmental friendliness. However, since felt-based materials are generally less voluminous and moldable as foam components, they require more weight to thoroughly fill the areas of varying thickness between the surface of the component and the vehicle’s body-in-white. In contrast, Autoneum’s Flexi-Loft technology is significantly lighter, more flexible and more adaptable than standard felts. In addition, the fiber-based material is versatile and clearly outperforms current foam products in terms of sustainability.

Thanks to its blend of recycled cotton and polyester fibers, Flexi-Loft substantially reduces component weight while improving geometrical adaptability and acoustic performance, especially in areas of low thickness. Thanks to the specific properties of the fibers, Flexi-Loft enables a precise adaptation to a wide variety of vehicle bodies, thereby improving the noise-insulating qualities of the respective product. Even at low weight, Flexi-Loft covers a wide range of material thicknesses, thus proving to be an ideal decoupling material for interior components with complex shapes such as inner dashes and automotive carpets. As a lightweight, flexible and sustainable alternative to both standard felts and foam, Flexi-Loft distinguishes itself by its versatile application in combination with existing Autoneum technologies such as Hybrid-Acoustics and Prime-Light. Moreover, the material helps to reduce odor and dust inside the vehicle.

Flexi-Loft consists of at least 50% recycled cotton fibers, and cut-offs generated during the manufacturing process are reclaimed, processed and then reused in the production of new felt blanks.

Autoneum is already using Flexi-Loft worldwide as an insulator for various carpets, inner dashes and other acoustic components based on its Prime-Light technology. The application of the material as an effective decoupler in inner dashes made of Hybrid-Acoustics will be launched on the European market in 2023.

More information:
Autoneum Automotive acoustic
Source:

Autoneum Management AG

11.11.2021

SGL Carbon: Q3 2021 confirms encouraging upward trend

  • Sales increase 8.8% to €743.5 million compared to the same period of the previous year
  • EBITDApre improves by 59.1% to €108.5 million
  • Despite burdens from higher raw material and energy prices, stable revenue and earnings expected for Q4 2021

Following consolidated sales of €241.5 million in Q1 2021 and €255.2 million in Q2 2021, Q3 2021 confirms SGL Carbon's encouraging sales performance with €246.8 million. Due to increasing demand from almost all market segments, Group sales increased to a total of €743.5 million in the first nine months of the fiscal year (9M 2020: €683.5 million). This corresponds to an increase of 8.8% compared to the same period of the previous year.

  • Sales increase 8.8% to €743.5 million compared to the same period of the previous year
  • EBITDApre improves by 59.1% to €108.5 million
  • Despite burdens from higher raw material and energy prices, stable revenue and earnings expected for Q4 2021

Following consolidated sales of €241.5 million in Q1 2021 and €255.2 million in Q2 2021, Q3 2021 confirms SGL Carbon's encouraging sales performance with €246.8 million. Due to increasing demand from almost all market segments, Group sales increased to a total of €743.5 million in the first nine months of the fiscal year (9M 2020: €683.5 million). This corresponds to an increase of 8.8% compared to the same period of the previous year.

Almost all business units contributed to the positive sales development. As largest business unit with a 44.7% share of Group sales, Graphite Solutions (GS) contributed €332.7 million to Group sales in the first nine months of 2021 (9M 2020: €308.0 million). The sales increase of 8.0% is based in particular on the positive development of the important market segments Semiconductor & LED as well as Automotive & Transportation. The business units Carbon Fibers and Composite Solutions contributed €244.7 million (9M 2020: €223.4 million) and €92.1 million (9M 2020: €60.7 million), respectively, to Group sales and benefited primarily from increased demand from the automotive industry. Compared to the previous year, sales increased by 9.5% in Carbon Fibers and by 51.7% in Composite Solutions. Only the Process Technology business unit, with sales down 4.9% to €62.1 million, was not yet able to participate in the general economic upward trend.

See the attached document for more infomation.

More information:
SGL Carbon sales
Source:

SGL CARBON SE

DiloGroup: successful INDEX exhibition (c) DiloGroup
DiloGroup at the INDEX
10.11.2021

DiloGroup: successful INDEX exhibition

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

DiloGroup would like to thank all customers and interested parties for visiting the Dilo booth in Geneva. Despite the existing worldwide Covid, we were able to welcome a great number of well-known faces as well as meet new contacts, among them the most important nonwovens producers from across the world in all application areas: hygiene and lightweight nonwovens, technical textiles and needled nonwovens including geotextiles, filter media and automotive. The interest in using resource saving plant engineering, energy saving and the processing of natural fibres remains.

Dilo presented its latest developments in industry 4.0. Systematic plant monitoring and analysis of machine data allows simplified operation and more effective production. This smart system was illustrated with the aid of live analysis of the performance, quality and availability parameters of the production lines in our Textile Research Centre. The new production systems Hyperpunch Alpha, HyperTex and 3D-Lofter were explained with the aid of videos which led to a very positive responsive from the many different producers which are interested in running trials at the Dilo Textile Research Centre to further explore these subjects. These highlights and further new developments were the basis for fruitful technical discussions.

Source:

Oskar Dilo Maschinenfabrik KG

VDMA: Top young talent with cutting-edge topics  (c) VDMA
The 2021 winners (from top left to right): Dr Martin Hengstermann, Irina Kuznik, Kai-Chieh Kuo.
10.11.2021

VDMA: Top young talent with cutting-edge topics

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

The Chairman of the Walter Reiners-Stiftung foundation of the VDMA Textile Machinery Association, Peter D. Dornier has awarded prizes to three successful young engineers. The award-winning works provide practical solutions on the topic of circular economy. For example, the recycling of carbon fibres, which are used to produce lightweight components for the automotive industry. Or the environmentally friendly production of yarns from crab shells. Another topic was medical applications: The processing of ultra-fine yarns into stents for aortic repair. The award ceremony took place online on 9 November as part of the Aachen-Dresden-Denkendorf International Textile Conference.  

With a creativity prize, endowed with 3,000 euros, the foundation honoured the diploma thesis of Irina Kuznik, TU Dresden. She used a creative approach to realise solutions for processing chitosan into fibre yarn.

Mr Kai-Chieh Kuo was awarded the diploma/master's thesis promotion prize of 3,500 euros. With his master's thesis, which was written at RWTH Aachen University, Mr Kuo contributes to the production of vital components used in medicine. The stents made of ultra-fine yarns are made possible by an innovative modification of the classic tube weaving process.

The Walter Reiners Foundation rewarded the doctoral thesis of Dr. Martin Hengstermann with the promotional prize in the dissertation category, endowed with 5,000 euros. The thesis deals with the production of recycled carbon fibres. These can be used to produce lightweight components for motor vehicle and aircraft construction or the wind energy sector.

New Prize Sustainability / Circular Economy
The environmental conditions of the textile industry and machine construction are changing. Topics such as climate protection and the circular economy are becoming central. From this perspective, the board of the Walter Reiners Foundation has decided to further develop the foundation's prize system.

In 2022, the foundation will for the first time offer a prize with a focus on design / sustainability. Peter D. Dornier, Chairman of the Foundation, explained: "Already in the design phase, one can set the parameters so that a textile product can be reintroduced after use into the economic cycle for a high-quality application. For example, through the appropriate use of materials and finishing. We are looking for solutions for resource-saving design, technology and manufacturing processes."   

04.11.2021

Autoneum presents medium-term financial targets

Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.

In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.

Autoneum presented an insight into current market trends and the Company's strategic focus in the areas of electromobility and sustainability, as well as an outlook on its medium-term financial targets at the media and financial analysts brunch.

In addition to current market expectations and trends in the automotive industry, the focus will be on Autoneum’s activities and growth potential in the areas of e-mobility and sustainability. Matthias Holzammer, CEO, and other experts of the Company will present Autoneum's latest developments with regard to New Mobility and sustainable product innovations as well as their strategic classification. CFO Bernhard Wiehl will also present Autoneum's new medium-term financial targets.

Based on the further expansion of the portfolio with sustainable products and new applications for e-vehicles as well as the increase in market share with existing and new customers, particularly in Asia, the Company expects a profitable revenue growth at market level in the medium term. Based on the expected revenue development, further progress in the turnaround of North America as well as the consistently practiced operational excellence in all business areas, Autoneum targets an EBITDA margin of 13% in the medium term. Accordingly, a solid free cash flow in the amount of 6% of revenue and a further increase in the equity ratio to over 35% are targeted. The Company still intends to pay a dividend to shareholders of at least 30% of the profit attributable to Autoneum shareholders.

More information:
Autoneum Automotive Sustainability
Source:

Autoneum Management AG

28.10.2021

Autoneum adjusts outlook for the current financial year

Due to the significantly reduced market expectations for global light vehicle production, Autoneum lowers its revenue and earnings forecast for the full year 2021. This results from bottlenecks in the supply chain of vehicle manufacturers, in particular the ongoing shortage of semiconductors.

Although demand from end customers continues to be high in all regions, global light vehicle production in the second half of 2021 is expected to be around 10% lower than in the first half-year due to bottlenecks in the supply chain of vehicle manufacturers, mainly with regard to semiconductors.

Due to market developments, revenue in the second half-year 2021 is now anticipated to be correspondingly lower than in the first semester.

As a result of the lower revenue development in the second half of the year, an EBIT margin of 2-3% (previously: 4-5%) is now expected for the full year 2021. Free cash flow is estimated to be in the range of CHF 60 to 70 million.

Due to the significantly reduced market expectations for global light vehicle production, Autoneum lowers its revenue and earnings forecast for the full year 2021. This results from bottlenecks in the supply chain of vehicle manufacturers, in particular the ongoing shortage of semiconductors.

Although demand from end customers continues to be high in all regions, global light vehicle production in the second half of 2021 is expected to be around 10% lower than in the first half-year due to bottlenecks in the supply chain of vehicle manufacturers, mainly with regard to semiconductors.

Due to market developments, revenue in the second half-year 2021 is now anticipated to be correspondingly lower than in the first semester.

As a result of the lower revenue development in the second half of the year, an EBIT margin of 2-3% (previously: 4-5%) is now expected for the full year 2021. Free cash flow is estimated to be in the range of CHF 60 to 70 million.

More information:
Autoneum supply chain Automotive
Source:

Autoneum

(c) RadiciGroup
25.10.2021

RadiciGroup: Sustainable Personal Protective Equipment at A+A

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

RadiciGroup is exhibiting at the A+A trade fair, an international event focusing on safety solutions for the workplace, to be held in Dusseldorf, Germany, from 26 to 29 October. This international show gives RadiciGroup the opportunity to present its latest developments in personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots.

This international show gives RadiciGroup the opportunity to present its latest developments in  personal protective equipment (PPE) for industrial use, including coveralls, gowns, caps, full hoods, shoe covers and boots. These products are part of a new line, Radipeople, a trade name identifying the new protective workwear sold by RadiciGroup: end products of a traceable supply chain, in which special attention is paid to the choice of raw materials and the quality of the final products offered the market.

At RadiciGroup, care for the health and safety of people is one of the pillars of the Group's sustainability strategy, combined with a strong commitment to safeguarding the environment. Radipeople Eco, the first protective coverall with 100% end-of-life recyclability is proof of such commitment. All parts of Radipeople Eco: the fabric, lamination, zipper and thread are made of the same material, 100% polypropylene. Furthermore, the Group’s offering includes garments made with Respunsible®, a spundbond obtained from recycled polypropylene or materials certified under the ISCC Plus scheme.

Thanks to their versatility and technical characteristics, the nonwoven solutions proposed by RadiciGroup are suitable for many industrial sectors, including oil and gas, utilities, construction, food, automotive painting and shipbuilding, maintenance, agriculture, laboratories, microprocessor manufacturing and the pharmaceutical and chemical industries.

Radipeople personal protective equipment delivers excellent protection against external agents (liquids, splashes, jets, particles and sprays), high protection against biological hazards and infectious agents, and high robustness and lightness to optimize protection, on the one hand, and comfort, on the other. All Radipeople protective equipment is made of fully traceable materials, manufactured by a totally Italian production chain involving hundreds of workers, and sold in packaging designed with an ecodesign approach, that is, fully recyclable minimized packaging.

Source:

RadiciGroup

(c) Trevira GmbH
19.10.2021

Indorama at Index 2021 with Sustainability Portfolio

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

The Hygiene Fibers Group of Indorama Ventures (IVL) came together at the Index Show to present an all-inclusive range of recycled and biodegradable solutions for Hygiene Fiber and Nonwoven applications.

The combination of polymers, technologies, processes and global reach supported by the Hygiene Fibers Group – one of three business segments that make up Indorama Ventures – positions it within the Hygiene industry to meet increasingly challenging market demand for innovative sustainable solutions within the hygiene sector. Across the six brands and companies that make up Hygiene Fibers Group – Auriga, Avgol, FiberVisions, Indorama Asia, Trevira and Wellman International – sustainability and supporting customers to achieve circular objectives is integral to all efforts and fundamental to the ethos of the Hygiene business segment.

At the Index Show, the Hygiene Fibers Group launched CiCLO®, a textile technology which allows polyester and other synthetic materials to biodegrade like natural materials do in wastewater treatment plant sludge, sea water and landfill conditions, reducing synthetic microfiber pollution generated during washing, and minimizing plastic accumulation in landfills caused by discarded textiles.

In line with the company’s commitment to support customers with high performance products, while also reducing the impact on the environment, several of the  Hygiene Fibers brands, including Wellman International, Trevira GMBH and Auriga, have been working closely over the last 12 months with the IAM team and the CiCLO® technology. Developments have focused on PET and rPET staple fiber and filament sustainable solutions for applications where recycling is particularly challenging, such as Hygiene, Home Textiles and Automotive applications.

Strengthening the profile of biodegradable offerings within the Hygiene Fibers Group’s sustainability portfolio, Trevira introduced a new range of bicomponent fibres based on PLA and PBS (polybutylene succinate) at the Index show. Both biopolymers offer an exceptional technological opportunity in terms of environmental care and sustainability, while delivering optimum performance. Equally to PLA, PBS is recyclable and up to 100% biodegradable under industrial conditions.

Efforts towards supporting customers to achieve circular objectives are a priority within the Hygiene Fibers Group. This is reflected in the recycled fibers expertise deployed across the segment. Four Hygiene Fibers Group brands, IVL Asia, Auriga, Trevira and Wellman International offer an extensive range of 100% recycled, accredited PET fibers, across a multitude of fiber and nonwovens applications.

The development and evolution of sustainable technologies is central to activity across IVL’s Hygiene Fibers Group, with particular focus on sustainable polyolefin solutions. FiberVisions and ES-FIBERVISIONS, leading Polyolefin mono and bico fiber brands and sister company Avgol, have partnered with UK-based Polymateria to commercially harness the innovative ‘biotransformation’ technology pioneered by Polymateria. The patented technology alters the properties of polyolefins to make them biodegradable in a natural process.  Other polyolefin sustainable innovations within the Hygiene Fibers Group were featured at Index include biosurfactant and biocolourant developments being undertaken by the Avgol team with FiberVisons progressing sustainable design solutions, including lightweight, high performance, reduced carbon solutions.

Source:

Trevira GmbH, Indorama Ventures

14.10.2021

Monforts: Automated finishing at Knopf’s Sohn

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

Knopf’s Sohn, a contract finisher of technical textiles, has installed a fully automated Montex stenter at its plant in Helmbrechts, Germany.
Knopf’s Sohn is processing technical textiles for the automotive, aerospace, home furnishings and workwear markets, based on wool, cellulose, polyamide and polyester fabrics, along with elastane blends, in weights of 80-800gsm.

The Montex machinery range is constantly being upgraded to meet evolving customer needs for greater automation, ease of operation and energy optimisation. The latest ten chamber line at Knopf’s Sohn, with a working width of up to 2.0 metres, was engineered to specific requirements in order to accelerate the company’s move to fully automatic control of its production, and high scaffolding was required for its installation.

The line benefits from two integrated ECO Booster modules to provide high energy savings. These compact, air-to-air heat exchangers, installed within the roof structure of the line, exploit energy from the exhaust gas to preheat up to 60% of the incoming fresh air entering the stenter.

The use of a single ECO Booster unit has been calculated to save up to 35% in energy costs, based on fixation processes. Fully automatic operation, set at the Monforts Qualitex control unit, ensures there is no additional burden on the machine operator.

The line is powered by Exxotherm indirect heating, which practically eliminates the yellowing which can be experienced during the treatment of certain polyamide and elastane-based fabrics, and is also equipped with a Conticlean circulating air filter system for constant high drying capacity.

Software
The latest Qualitex visualisation software offers operators reliability and easy control with its full HD multi-touch monitor and slider function, dashboard function with individual adaptation to operating states and faster access to comprehensive recipe data management.

With the Monformatic control system, the exact maintenance of the dwell time in combined treatment processes (drying and heat-setting) can be monitored. When the heat-setting point is reached, the fan speed is automatically adjusted, keeping energy consumption fully under control.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG / AWOL Media

13.10.2021

Sales partnership for Switzerland starts at Fakuma 2021

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

  • Polynova to gain market share for the GRAFE Group in the Swiss region from November The GRAFE Group, Blankenhain, has found a new sales representative for Switzerland in Polynova Group AG, Risch-Rotkreuz (Switzerland).

The partnership will be officially launched at Fakuma 2021. "Our new Swiss agency specialises in the distribution and production of high-quality technical plastic granulates and has been active on the market for more than 20 years. The company has a large customer base and the necessary technical expertise to advance our goals in this important market. This includes raising our profile, educating people about our product range and ultimately gaining market share," says Stefanie Theuerkauf, Sales Manager for the D-A-CH region. Polynova employs five sales staff and three in logistics, all of whom have a technical background. The company's own warehouse in Rothenburg also ensures the availability of the plastics.

"GRAFE fits perfectly into our product portfolio," says Thomas Weigl, co-owner and responsible for business development at the Swiss distribution company, whose employees recently underwent intensive training in Blankenhain. "Our customers come from the sports goods, housing technology, automotive supplier and medical technology sectors - there are many synergies with GRAFE." Weigl himself has extensive experience in the masterbatch sector and has worked for two companies in the industry - Sukano and Americhem - as managing director. "Swiss companies want Swiss contact persons. We speak the languages German, Italian and French, are on site in the shortest possible time, offer direct contact and understand the needs of the customers and the requirements of the market," he explains. "Polynova is thus faster, closer and more direct." "The Swiss market is large and important for us," reports Theuerkauf and Weigl explains the background: "There are over 300 plastics processors, many are family-run and very technically oriented. The origins of the companies are often in the watch industry and in the production of the smallest precision parts such as gear wheels. In addition, coffee machine manufacturers, medical technology providers and automotive suppliers are important market players. A large number of well-known OEMs are located here."

Even though there are already masterbatch manufacturers in the Alpine country, says the sales expert, no one has the know-how to adjust compounds and masterbatches as perfectly and precisely as the company from Thuringia. In addition to a complete range of colours on practically all plastic substrates, flame retardants, UV additives, thermal stabilisers or lubricants are further examples of the extensive product portfolio. GRAFE is one of the specialists in the modification of thermoplastics and is an innovation driver in the production of colour masterbatches. "The technical possibilities in terms of a state-of-the-art technical centre and production machinery, as well as one of the largest research and development departments in the industry, are also not to be found elsewhere on the Swiss market. Our task now is to bring these to the attention of domestic customers," says Thomas Weigl, co-owner of Polynova AG together with founder Renato R. Huebscher.

Source:

GRAFE Advanced Polymers GmbH

Visionary building – with composite textiles by vombaur (c)vombaur
From the H-profile to the chamber structure – vombaur offers individually developed composite textiles with complex shapes
13.10.2021

Visionary building – with composite textiles by vombaur

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

  • Hightech textiles for future-oriented construction projects

Building shells, bridges, staircases, façades ... construction projects are exposed to enormous mechanical loads. Often there are also considerable climatic or environmental influences. This has prompted the increasing use of fibre-reinforced materials in construction projects. After all, besides many other exciting properties, they offer high mechanical rigidity, low weight and excellent corrosion resistance.

Tapes, tubulars, sections and 3D woven textiles by vombaur form the perfect basis for these innovative building materials. The seamless round or shaped woven narrow textiles made of high-performance fibres are extremely loadable because they have neither seams nor welds – and therefore no undesirable breaking points. Their surface properties are identical over the entire length. In challenging tasks, composite textiles by vombaur offer a lightweight solution that is as reliable as it is durable.

Safe and durable solutions for challenging applications
The potential applications for lightweight components in the construction industry are as numerous as the project ideas of the planning and construction teams.
•    Ropes and tensioning elements made of carbon fibre reinforced plastic (CFRP)
•    Reinforcement of building structures made of concrete, steel, wood or other materials
•    Sustainable restructuring of constructions and urban districts for bridges and buildings
•    CFC slats as reinforcements in case of repairs
•    (Filled) GRP pipes made of seamless round woven tubes by vombaur as columns/pillars
•    CFRP sections as steel girder substitutes
•    Hollow profiles with individually designed cross-sections
•    Glass fibre reinforced connecting elements for glazing to minimise expansion differences between the connecting element and the glass
•    Individual light wells

Implementing visions – with composite textiles by vombaur
As your development partner, vombaur facilitates innovative composites projects for challenging applications. In innovative and safety-sensitive industries such as automotive and aviation, chemical and plant engineering.  The composites experts at vombaur develop, create samples of and manufacture woven tapes and seamless round or shaped woven textiles by vombaur – in collaboration with the customer's enterprise development teams and individually for the respective projects. This is how novel and unique lightweight components made of high-performance textiles are created for visionary lightweight construction projects.

"Fibre-reinforced composites are the ideal material for future-oriented construction projects," explains Dr.-Ing. Sven Schöfer, Head of Development and Innovation at vombaur. "Their outstanding technical properties and design possibilities open up new and fascinating perspectives for construction projects. From building construction to civil engineering, from bridge construction to interior design. As an experienced development partner for sophisticated lightweight components, we at vombaur contribute our seamless solutions to these kinds of future-oriented projects."

More information:
vombaur Composites carbon fibers
Source:

vombaur GmbH & Co. KG

12.10.2021

Röhm: PLEXIGLAS® molding compounds at Fakuma 2021

  • Comprehensive portfolio for innovative vehicle design
  • Material development is keeping pace with technical innovations
  • PLEXIGLAS® Optical HT PMMA special molding compound for the best optical quality at high continuous service temperatures

Vehicle design requirements are changing in line with the huge trends in the industry, such as electric drivetrains and autonomous driving. Materials manufacturers are preparing for this and are developing custom materials – and PLEXIGLAS® special molding compounds from Röhm GmbH are just one example. Between October 12 and 16, the Molding Compounds business unit will be presenting its diverse range of PLEXIGLAS® molding compounds for the automotive sector at Fakuma 2021 in Friedrichshafen.

The brand polymethyl methacrylate (PMMA) from Röhm is both light and robust, has a high-quality surface and can be processed in all common injection molding and extrusion procedures.

  • Comprehensive portfolio for innovative vehicle design
  • Material development is keeping pace with technical innovations
  • PLEXIGLAS® Optical HT PMMA special molding compound for the best optical quality at high continuous service temperatures

Vehicle design requirements are changing in line with the huge trends in the industry, such as electric drivetrains and autonomous driving. Materials manufacturers are preparing for this and are developing custom materials – and PLEXIGLAS® special molding compounds from Röhm GmbH are just one example. Between October 12 and 16, the Molding Compounds business unit will be presenting its diverse range of PLEXIGLAS® molding compounds for the automotive sector at Fakuma 2021 in Friedrichshafen.

The brand polymethyl methacrylate (PMMA) from Röhm is both light and robust, has a high-quality surface and can be processed in all common injection molding and extrusion procedures.

At Fakuma 2021, Röhm will present one of its newest special molding compounds for the first time. PLEXIGLAS® Optical HT was developed specifically for applications with high power LEDs, such as headlamp lenses. With its special characteristics profile, the innovative material guarantees the best possible optical quality even at increased continuous service temperatures.

More information:
Röhm Fakuma PLEXIGLAS® Automotive
Source:

Röhm GmbH

RadiciGroup: Producing apparel from waste oil (c) RadiciGroup
30.09.2021

RadiciGroup: Producing apparel from waste oil

RadiciGroup demonstrates the feasibility of industrial-scale production of polyamides (nylon) starting from bio adipic acid obtained from renewable raw materials, including waste oil and by-products of the oil industry. Potential application sectors for the process and products are textile/fashion, automotive, design, electrical and electronics.

The research was conducted through the Ulysses project and experimentation was performed in collaboration with research centres and universities. Partial funding was received from the Region of Piedmont, within the scope of the “Call for Proposals IR2 (Industrialization of research results)”. The ambitious, innovative multiyear project was launched in March 2018 and stemmed from RadiciGroup's desire to increase the sustainability of its products, whilst delivering the same quality and performance as required by product standards. What is more, the Group wanted to meet the demand coming from its various strategic sectors, in line with the European targets for the development of low-emission businesses and a circular economy.

RadiciGroup demonstrates the feasibility of industrial-scale production of polyamides (nylon) starting from bio adipic acid obtained from renewable raw materials, including waste oil and by-products of the oil industry. Potential application sectors for the process and products are textile/fashion, automotive, design, electrical and electronics.

The research was conducted through the Ulysses project and experimentation was performed in collaboration with research centres and universities. Partial funding was received from the Region of Piedmont, within the scope of the “Call for Proposals IR2 (Industrialization of research results)”. The ambitious, innovative multiyear project was launched in March 2018 and stemmed from RadiciGroup's desire to increase the sustainability of its products, whilst delivering the same quality and performance as required by product standards. What is more, the Group wanted to meet the demand coming from its various strategic sectors, in line with the European targets for the development of low-emission businesses and a circular economy.

Source:

RadiciGroup

JUMBO-Textil: Innovative braiding technology. Innovative products (c) JUMBO-Textil
29.09.2021

JUMBO-Textil: Innovative braiding technology. Innovative products

  • JUMBO-Textil offers elastic high-tech braids – produced on high-tech systems

Developing narrow textile solutions for our customers – quickly, flexibly and precisely – that is our claim. For us and for our technology. Because first-class industrial solutions require first-class technology. Highly automated and digitally controlled. Technology like that found in our variation braider from Herzog – the high-performer among modern braiding machines. JUMBO-Textil is the first narrow textile manufacturer ever to produce elastic hole cords on the special system.

  • JUMBO-Textil offers elastic high-tech braids – produced on high-tech systems

Developing narrow textile solutions for our customers – quickly, flexibly and precisely – that is our claim. For us and for our technology. Because first-class industrial solutions require first-class technology. Highly automated and digitally controlled. Technology like that found in our variation braider from Herzog – the high-performer among modern braiding machines. JUMBO-Textil is the first narrow textile manufacturer ever to produce elastic hole cords on the special system.

High-performance system for extremely stable textile components
The special system combines sophisticated bobbin lace technology with digital control and thus enables the production of highly complex, individually specifiable braided structures. The variation braider's technology ensures an uninterrupted fibre course across all branches. This not only allows individual, idiosyncratic geometries, it also and above all helps with the stability of the components. This is because where other methods create branching points that are susceptible to breakage due to laser cutting, seams or knots, the variation braider simply braids through the branched strands. As the fibre course is not interrupted in braided branches, the resilience of the textiles is significantly increased. And individual braids are created for very different applications.

Bobbin lace technology for highly complex structures
Unlike in classical braiding systems, the impellers of the variation braider are arranged in a square. Up to eight different strands can be braided and interlaced with the textile all-rounder. All bobbins can be programmed separately and thus the bobbin lanes can be combined variably and individually. JUMBO-Textil also produces tubular braids with precisely defined braided openings, triaxial braids and highly complex preforms with the variation braider. The geometries of the narrow textiles range all the way to net structures. For braided cables, we create stable connections in the core-sheath braiding by weaving the core and the protective sheathing, which provides protection especially at the turns: there is no longer any undesired core and sheath slippage.

Individual braid architectures – for automotive, outdoor and more
Complex non-elastic cords from the variation braider have been in operation at JUMBO-Textil for a long time. For hole cords – or bifurcation cords (from the Latin: furca, the fork) – the bobbin points are individually programmed so that the arrangement and length of the branching precisely meet the requirements. It is used, among others, in the automotive sector, in the construction industry and in the outdoor sector to hang or unhang elements without using metal.

Elastic hole cord from the elastics specialist
The elastic hole braids by JUMBO-Textil are new on the market. "The variation braider offers us fantastic possibilities: we can pre-configure what we want to braid and are completely free to do so. The repeat is computer-controlled," explains Holger Vehring, Project Engineer at JUMBO-Textil. "A seamless braided cable harness tubular that organises the cable mess (for automotive), braided hoses with defined openings for conductive elements in smart textiles or rehab applications, as tensioning elements in backpacks or functional clothing – the possible applications are vast. Thanks to this technology, textile – i.e. lighter, quieter and more flexible – components can be used for numerous applications in which metallic materials were previously used due to the fragile branching points."

 

Hexcel and HP Composites Collaborate to Develop Class A Body Panels (c) Hexcel
2020-Alfa-Giulia-GTAm
29.09.2021

Hexcel and HP Composites Collaborate to Develop Class A Body Panels

Hexcel has collaborated with HP Composites S.p.A (HP Composites), a world leader in the production of carbon fiber components for automotive and motorsports, to develop carbon fiber Class A body panels. Hexcel HexPly® XF surfacing technology is being extensively used by the Italian component producer to manufacture external body panels and other components for supercars such as Alfa Romeo’s stunning new supersport sedans, the Giulia GTA, and GTAm.

With five production plants in Italy, HP Composites has built an impressive track record of high-performance composite successes on both road and racetrack. HP has combined this processing expertise with Hexcel HexPly® XF3 surfacing material, HexPly® M47, and HexPly® M49 prepregs, working to the highest standards set by the most prestigious supercar OEMs and leading motorsport teams.

Hexcel has collaborated with HP Composites S.p.A (HP Composites), a world leader in the production of carbon fiber components for automotive and motorsports, to develop carbon fiber Class A body panels. Hexcel HexPly® XF surfacing technology is being extensively used by the Italian component producer to manufacture external body panels and other components for supercars such as Alfa Romeo’s stunning new supersport sedans, the Giulia GTA, and GTAm.

With five production plants in Italy, HP Composites has built an impressive track record of high-performance composite successes on both road and racetrack. HP has combined this processing expertise with Hexcel HexPly® XF3 surfacing material, HexPly® M47, and HexPly® M49 prepregs, working to the highest standards set by the most prestigious supercar OEMs and leading motorsport teams.

Hexcel’s automotive composites portfolio is the result of decades of industry experience and the creation of strategic partnerships to develop and optimize leading-edge technologies. HexPly XF3 is an epoxy prepreg surface material, developed with processing input from the HP Composites team to address the challenges of producing high-quality Class A automotive body panel surfaces with excellent resistance to aging tests.

Applied as the first ply in the mold and after curing at 120-180˚C in an autoclave, HexPly XF3 produces a smooth part surface with no porosity, that requires minimal preparation for painting.

HexPly XF3 is supplied in an easy-to-handle roll format with good tack and drapability. After curing, it can be easily prepared for painting with a rapid sanding process. HP Composites has incorporated automated robotic sanding techniques for this finishing stage with the paint-ready HexPly XF3 surface providing excellent paint adhesion according to EN ISO 2409.

HP Composites typically uses autoclave processing for HexPly XF3 parts, maximizing weight savings and structural performance of the final components. In addition, HP has also developed its own proprietary press and compression molding processes, including Air Press Moulding® technology, compatible with HexPly XF3 and other HexPly prepregs for higher volume production series that require increased production rates.

“Our long-term experience has given us a detailed understanding of the critical features that influence how prepregs and surfacing technologies interact with different production processes,” said Abramo Levato, General Manager, HP Composites S.p.A. “The relationship we have with Hexcel is both highly technical and highly supportive. As a result we have a complete material package for high-quality Class A body panels that are formulated specifically with our requirements in mind.”

“Combining the expertise of HP with a strong technical interaction and collaborative dialogue, Hexcel and HP were together able to develop the optimum HexPly XF surfacing technology,” said Claude Despierres, VP Sales and Marketing, Hexcel. “With HexPly XF3 we satisfy the toughest industry standards.”

B.I.G. YARNS awarded HPR status for second European plant © Beaulieu International Group
B.I.G. YARNS awarded HPR status for second European plant.
07.09.2021

B.I.G. YARNS awarded HPR status for second European plant

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

  • FM Global ‘Highly Protected Risk’ Achievement Award for Komen site, Belgium
  • Completes HPR Award status for B.I.G. YARNS’ European production facilities
  • Fifth plant in Beaulieu International Group to attain HPR Award

B.I.G. YARNS is proud to announce the attainment of a FM Global ‘Highly Protected Risk’ Achievement Award (HPR Award) for its yarn production facility in Komen, Belgium.

The HPR Award is assigned by insurer FM Global, Beaulieu International Group’s insurance partner of the past five years in its on-going dedication to property loss prevention. A worldwide team of engineers focuses on providing assistance and protection of B.I.G.’s assets, helping the Group to achieve a higher level of risk protection. The FM Global assessment considers implementation of measures to protect against fire, natural hazard, mechanical breakdown of machinery and also cyber risks. The local team worked diligently over the last five years to implement all the FM Global recommendations.

Emmanuel Colchen, General Manager B.I.G. YARNS, comments: “Achieving the prestigious HPR Award recognizes the commitment of the teams at B.I.G. YARNS and the wider Beaulieu International Group to proactive risk management and contingency planning to ensure the safety and protection of our workplaces. Safeguarding property is a key element in enabling us to provide business continuity for our customers in demanding sectors like automotive, commercial contract and residential flooring.”

B.I.G. YARNS’ Komen production facility is the fifth plant at B.I.G. to receive HPR status - the highest level a plant can achieve for fire risk prevention and protection.

The Yarns division of Beaulieu International Group achieved HPR status for its other European site in Comines, France, in 2017.

06.09.2021

Lectra announces the acquisition of Gemini CAD Systems

Lectra announces the signature of an agreement to acquire the entire capital and voting rights of the Romanian company Gemini CAD Systems. A major global player in the fashion, automotive, and furniture markets, Lectra designs and produces industrial intelligence solutions – software, hardware, data and services – for brands, manufacturers and retailers.
The acquisition is in line with Lectra’s strategy of developing its presence in the fashion market, enriching its value proposition and fashion software portfolio.

Founded in 2004, Gemini CAD Systems (Gemini) has developed several innovative software solutions, essentially Computer Aided Design (CAD), for small and medium-sized fashion companies. Thanks to its network of partners, Gemini is present in over 60 countries.

The transaction concerns the acquisition of 60% of Gemini right now for 7.6 million euros. The acquisition of the remaining capital and voting rights will take place in two steps, in September 2024 and September 2026. The total consideration for the acquisition of 100% of Gemini’s capital will depend on Gemini’s revenue growth, and should be comprised of between 13 and 20 million euros.

Lectra announces the signature of an agreement to acquire the entire capital and voting rights of the Romanian company Gemini CAD Systems. A major global player in the fashion, automotive, and furniture markets, Lectra designs and produces industrial intelligence solutions – software, hardware, data and services – for brands, manufacturers and retailers.
The acquisition is in line with Lectra’s strategy of developing its presence in the fashion market, enriching its value proposition and fashion software portfolio.

Founded in 2004, Gemini CAD Systems (Gemini) has developed several innovative software solutions, essentially Computer Aided Design (CAD), for small and medium-sized fashion companies. Thanks to its network of partners, Gemini is present in over 60 countries.

The transaction concerns the acquisition of 60% of Gemini right now for 7.6 million euros. The acquisition of the remaining capital and voting rights will take place in two steps, in September 2024 and September 2026. The total consideration for the acquisition of 100% of Gemini’s capital will depend on Gemini’s revenue growth, and should be comprised of between 13 and 20 million euros.

Source:

Lectra

Andritz AG. ANDRITZ Laroche Recycling Line
01.09.2021

ANDRITZ at INDEX20

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at INDEX20 in Geneva, Switzerland, from October 19 to 22. The broad ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, airlay, recycling, and natural fiber processing.

One highlight at INDEX will be the new member of the ANDRITZ Nonwoven division: ANDRITZ Laroche – a company that has been an important partner for ANDRITZ in the field of fiber preparation for drylaid nonwovens for over 10 years. ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers.

International technology Group ANDRITZ will be presenting its innovative nonwovens production and textile solutions at INDEX20 in Geneva, Switzerland, from October 19 to 22. The broad ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies such as air-through bonding, needlepunch, spunlace, spunbond, wetlaid/WetlaceTM, converting, textile finishing, airlay, recycling, and natural fiber processing.

One highlight at INDEX will be the new member of the ANDRITZ Nonwoven division: ANDRITZ Laroche – a company that has been an important partner for ANDRITZ in the field of fiber preparation for drylaid nonwovens for over 10 years. ANDRITZ Laroche is a leading supplier of fiber processing technologies such as opening, blending and dosing, airlay web forming, textile waste recycling, and decortication of bast fibers.

One focus of this product range is complete recycling lines for post-consumer and industrial textile waste to produce fibers for re-spinning and/or nonwoven end-uses. Customer awareness and regulations are pushing clothing brands to recycle their textile waste in their own products. Recycled fibers can also be used in the nonwovens industry for various applications, such as automotive, insulation, mattresses, and furniture felts.

Source:

Andritz AG