From the Sector

Reset
6 results
seat belts Photo Oerlikon Textile GmbH & Co. KG
07.09.2023

Oerlikon Polymer Processing Solutions at the Techtextil India 2023

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

At this year’s Techtextil India, the Polymer Processing Solutions Division of the Swiss Oerlikon group will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Between September 9 and 12, the discussions at Jio World Convention Centre (JWCC), Mumbai, will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
The yarns used in airbags are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technol-ogies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants - without any loss of function in any climate and for the lifetime of the vehicle

Buckle up!
Seat belts have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments. “With our unique, patented Single Filament Layer Technology, we offer a sophisticated and simultaneously gentle high-tenacity (HT) yarn process for manufacturing these lifesavers and other applications made from industrial yarn”, explains André Wissenberg, Head of Marketing.

Road reinforcement using geotextiles
Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demand-ing tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC –  quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

Source:

Oerlikon Textile GmbH & Co. KG

09.02.2023

Oerlikon: More services for customers in the USA

The American subsidiary of the Swiss Oerlikon Group, Oerlikon Textile Inc., is expanding and moving into new, modern premises tailored to future needs just a few kilometers away from its previous location in Charlotte, North Carolina. A new service center for the polymer processing industry will be created on approximately 4500 m² of office and commercial space latest by the middle of this year.
Oerlikon expands service offering for customers in the USA

"We are the preferred technology partner in the field of man-made fiber production in the USA and not only want to remain so, but also to further expand our services for our customers. However, the previous premises no longer offered any opportunities for expansion," explains Chip Hartzog, President of Oerlikon Textile Inc., the logical step.

The American subsidiary of the Swiss Oerlikon Group, Oerlikon Textile Inc., is expanding and moving into new, modern premises tailored to future needs just a few kilometers away from its previous location in Charlotte, North Carolina. A new service center for the polymer processing industry will be created on approximately 4500 m² of office and commercial space latest by the middle of this year.
Oerlikon expands service offering for customers in the USA

"We are the preferred technology partner in the field of man-made fiber production in the USA and not only want to remain so, but also to further expand our services for our customers. However, the previous premises no longer offered any opportunities for expansion," explains Chip Hartzog, President of Oerlikon Textile Inc., the logical step.

All processes will be optimized in the new buildings. Incoming goods, warehouse and dispatch will be merged, inventory control will be strengthened. On top, the range of services in the repair area will be expanded. "In addition to our services in the area of filament and carpet yarn systems, we will also be able to offer our customers repair services for staple fiber components such as crimpers or nonwoven systems in the future," says Chip Hartzog. This will further strengthen the market position for the Oerlikon Barmag, Oerlikon Neumag and Oerlikon Nonwoven brands.

Oerlikon Textile Inc. has been active in the manmade fibers business in the USA for over 55 years. In addition to the sale of Staple Fiber, BCF, IDY, POY, FDY and texturing plants, the product portfolio also includes upgrades and modernization of old plants, service and training offers as well as repair services and spare parts supplies.

(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Foto: Oerlikon Neumag
RoTac³
28.04.2022

Oerlikon Polymer Processing Solutions auf der ITM 2022

  • Energieeffiziente Chemiefaseranlagen für den türkischen Markt

Die pandemiebedingt mehrfach verschobene ITM in Istanbul findet vom 14. bis 18. Juni mit rund 1000 internationalen Ausstellern im Tuyap Fair and Congress Center statt.

Im Fokus stehen für die Oerlikon Division Polymer Processing Solutions des Maschinen- und Anlagenbauer Gesamtlösungen von der Schmelze bis zum Garn, zu den Fasern und Vliesstoffen. „Die Türkei ist ein sehr aktiver Markt“, beschreibt Sales Director Oliver Lemke die aktuelle Stimmung im Land. „Großes Interesse zeigen unsere Kunden an Factory Projekten, die von der hauseigenen Polykondensationsanlage bis zum Texturierten Garn, der begleitenden Automatisierung und korrespondierender digitaler Lösungen alles umfassen.“ Die Lieferung sämtlicher Prozessschritte aus einer Hand versprechen eine aufeinander abgestimmte Technologie, um die hohe Qualität des produzierten Garns sicherstellt.

  • Energieeffiziente Chemiefaseranlagen für den türkischen Markt

Die pandemiebedingt mehrfach verschobene ITM in Istanbul findet vom 14. bis 18. Juni mit rund 1000 internationalen Ausstellern im Tuyap Fair and Congress Center statt.

Im Fokus stehen für die Oerlikon Division Polymer Processing Solutions des Maschinen- und Anlagenbauer Gesamtlösungen von der Schmelze bis zum Garn, zu den Fasern und Vliesstoffen. „Die Türkei ist ein sehr aktiver Markt“, beschreibt Sales Director Oliver Lemke die aktuelle Stimmung im Land. „Großes Interesse zeigen unsere Kunden an Factory Projekten, die von der hauseigenen Polykondensationsanlage bis zum Texturierten Garn, der begleitenden Automatisierung und korrespondierender digitaler Lösungen alles umfassen.“ Die Lieferung sämtlicher Prozessschritte aus einer Hand versprechen eine aufeinander abgestimmte Technologie, um die hohe Qualität des produzierten Garns sicherstellt.

Weiterer Informationsschwerpunkt ist das Thema Nachhaltigkeit. In der Chemiefasergarnherstellung hat sich einiges getan: mechanische wie chemische Technologien zum Recycling von Flaschen, aber auch von Textilien, Biopolymere, Circular Economy. Mit Partnern und Tochtergesellschaften wie Oerlikon Barmag Huitong Engineering (OBHE) und Barmag Brückner Engineering (BBE) legt Oerlikon Polymer Processing Solutions entsprechende Konzepte vor.

BCF Technologie: 6800 dtex mit RoTac³ tangeln
Hochflorige Teppiche oder Teppiche für den Outdoorbereich liegen aktuell im Trend, die Nachfrage nach diesen margenstarken Garnen steigt signifikant. Die hierfür benötigten dicken BCF Garne aus PP, PET oder PA6 lassen sich ab sofort mit der RoTac³ tangeln. Beim sogenannten Fachen werden alle drei Fäden gemeinsam durch eine Tangelöffnung in der RoTac³ geführt und miteinander vertangelt. So lassen sich Tangelknoten deutlich gleichmäßiger setzen als mit anderen marktüblichen Tangeleinheiten, auch bei hohen Produktionsgeschwindigkeiten. Häufige Tangelaussetzer werden vermieden. Das sorgt für eine bessere Garnqualität und wirkt sich positiv auf den Weiterverarbeitungsprozess aus. Das Ergebnis ist ein sichtbar ebenmäßigeres Erscheinungsbild des Teppichs. Zusätzlich wird der Druckluftverbrauch je nach Garntyp um bis zu 50% reduziert.

Das 3-in-1 plying Paket ist optional für die BCF Anlagen S+ und BCF S8 mit RoTac³ erhältlich und kann auch auf Wunsch nachgerüstet werden.

Source:

Oerlikon

24.03.2022

Polyester recycling: Thai Polyester ordered four VacuFil recycling systems from BB Engineering

BB Engineering GmbH (Germany), a subsidiary of Oerlikon Textile, is pleased to announce that Thai Polyester Co., Ltd (Thailand) has placed a major order for four VacuFil systems for recycling bottle flakes with connected direct spinning. The polyester manufacturer, established in 2001 and with an overall annual capacity of 316,800 tons, is one of Thailand’s leading producers and exclusively uses German technology. To this end, the company already operates Oerlikon Barmag and Oerlikon Neumag systems. The BB Engineer-ing VacuFil systems will be deployed to convert existing spinning plant equipment from processing polyester to processing PET bottle flakes without loss of performance.

BB Engineering GmbH (Germany), a subsidiary of Oerlikon Textile, is pleased to announce that Thai Polyester Co., Ltd (Thailand) has placed a major order for four VacuFil systems for recycling bottle flakes with connected direct spinning. The polyester manufacturer, established in 2001 and with an overall annual capacity of 316,800 tons, is one of Thailand’s leading producers and exclusively uses German technology. To this end, the company already operates Oerlikon Barmag and Oerlikon Neumag systems. The BB Engineer-ing VacuFil systems will be deployed to convert existing spinning plant equipment from processing polyester to processing PET bottle flakes without loss of performance.

BB Engineering supplies the complete recycling process – from the drying stage and extrusion, all the way through to the spinning plant-appropriate fine filtration stage. Thanks to decades of experi-ence in spinning plant technology, the German machine construc-tor also provides comprehensive spinning plant know-how and is aware of how the recycling process must be designed to ensure that the product manufactured using the spinning plant ultimately has the right quality. The four new VacuFil systems will be integrated into the existing building infrastructure and process landscape at Thai Polyester, with a total output of approx. 4,000 kg/h. The Vacu-Fil systems will be complemented by BB Engineering 3DD mixers for directly feeding dyes into the recycled melt flow. Commissioning has been scheduled for 2023.

Thai Polyester will be using the new VacuFil systems to manufac-ture its ‘EcoTPC’ recycling-brand yarns. 100% of these polyester yarns are produced from bottle, fiber and yarn waste and are all GRS certified.

Source:

BB Engineering

OERLIKON: Largest staple fiber plant order in the company's history (c) Oerlikon Textile GmbH & Co. KG
Shen Jianyu, Chief Executive Officer of Xinfengming Group Co. together with Oerlikon Manmade Fibers Solutions Sales Director Felix Chau and Sales Manager Wang Xiaoxin at the signing of the contract for eight new staple fiber lines from Oerlikon Neumag.
15.06.2021

OERLIKON: Largest staple fiber plant order in the company's history

  • Xinfengming Group invests in innovative staple fiber technology from Oerlikon Neumag

Neumuenster/Shanghai – In the context of the ITMA ASIA + CITME currently taking place in Shanghai, Oerlikon has now announced that it has concluded the largest staple fiber plant order in the history of Oerlikon Neumag with the major Chinese group Xinfengming in the run-up to the trade fair. This involves eight complete staple fiber lines with a total of 320 spinning positions for the production of synthetic staple fibers. Oerlikon will not only supply the technology, but will also take over the engineering of the lines. Delivery is scheduled for 2022.

With a total capacity of 1,800 t/d, the project is Oerlikon Neumag's largest staple fiber plant order to date. The eight two-step lines will produce cotton-type staple fibers in a titer range of 1.0 - 1.4 denier. With this investment, the Xinfengming Group is expanding its product portfolio. As one of the world's leading FDY and POY polyester filament yarn producers, the Chinese company has relied on Oerlikon Barmag technologies for decades and now also on those of Oerlikon Neumag.

  • Xinfengming Group invests in innovative staple fiber technology from Oerlikon Neumag

Neumuenster/Shanghai – In the context of the ITMA ASIA + CITME currently taking place in Shanghai, Oerlikon has now announced that it has concluded the largest staple fiber plant order in the history of Oerlikon Neumag with the major Chinese group Xinfengming in the run-up to the trade fair. This involves eight complete staple fiber lines with a total of 320 spinning positions for the production of synthetic staple fibers. Oerlikon will not only supply the technology, but will also take over the engineering of the lines. Delivery is scheduled for 2022.

With a total capacity of 1,800 t/d, the project is Oerlikon Neumag's largest staple fiber plant order to date. The eight two-step lines will produce cotton-type staple fibers in a titer range of 1.0 - 1.4 denier. With this investment, the Xinfengming Group is expanding its product portfolio. As one of the world's leading FDY and POY polyester filament yarn producers, the Chinese company has relied on Oerlikon Barmag technologies for decades and now also on those of Oerlikon Neumag.