From the Sector

Reset
7 results
(c) Groz-Beckert KG
22.07.2024

Brückner, Groz-Beckert and Karl Mayer: Warp knitting symposium in Brazil

The German companies Brückner, Groz-Beckert, the Karl Mayer Group and Thies invite representatives of the Brazilian textile industry to a symposium with presentations and discussion panels in Blumenau, Brazil, on August 21, 2024. The event will be held at NS Armazém, Fortaleza, Blumenau and will focus on the current demand trend for warp knitted elastic fabrics.

The aim of the symposium is to provide a platform where knowledge can be exchanged and cooperation intensified. The symposium offers a wide variety of technical presentations as well as best practice examples and showcases cutting-edge technologies and innovations in warp knitting technology.

Interactive sessions and discussion rounds promote exchange among participants and provide networking opportunities. The event language is Portuguese.

The German companies Brückner, Groz-Beckert, the Karl Mayer Group and Thies invite representatives of the Brazilian textile industry to a symposium with presentations and discussion panels in Blumenau, Brazil, on August 21, 2024. The event will be held at NS Armazém, Fortaleza, Blumenau and will focus on the current demand trend for warp knitted elastic fabrics.

The aim of the symposium is to provide a platform where knowledge can be exchanged and cooperation intensified. The symposium offers a wide variety of technical presentations as well as best practice examples and showcases cutting-edge technologies and innovations in warp knitting technology.

Interactive sessions and discussion rounds promote exchange among participants and provide networking opportunities. The event language is Portuguese.

Those interested in attending the symposium may contact the sales representatives: Frank Bernhard or Fabricio Rampani (Brückner, Thies & Karl Mayer), or Diomar Gomes Vieira (Groz-Beckert) to register.

Source:

Groz-Beckert KG

13.09.2023

Brückner, Groz-Beckert, Karl Mayer and Thies invite to warp knitting symposium in India

The German companies Brückner, Groz-Beckert, the Karl Mayer Group and Thies invite representatives of the Indian textile industry to a symposium with presentations and discussion panels in Surat, India, on October 11 and 12, 2023. The event will be held at the Marriott Hotel Surat and will focus on the current demand trend for warp knitted elastic fabrics.

The demand for warp knitted elastic fabrics has increased rapidly in the past two to three years. On the one hand, this offers the Indian textile industry new growth opportunities and the chance to establish itself in a leading position in the growing market. On the other hand, the turnaround also holds challenges as the production steps involved in manufacture of warp knitted elastic fabrics are strikingly different from the conventional methods.

The German companies Brückner, Groz-Beckert, the Karl Mayer Group and Thies invite representatives of the Indian textile industry to a symposium with presentations and discussion panels in Surat, India, on October 11 and 12, 2023. The event will be held at the Marriott Hotel Surat and will focus on the current demand trend for warp knitted elastic fabrics.

The demand for warp knitted elastic fabrics has increased rapidly in the past two to three years. On the one hand, this offers the Indian textile industry new growth opportunities and the chance to establish itself in a leading position in the growing market. On the other hand, the turnaround also holds challenges as the production steps involved in manufacture of warp knitted elastic fabrics are strikingly different from the conventional methods.

In order to provide the Indian warp knitting industry with optimum support in this change, Brückner, Groz-Beckert, Karl Mayer and Thies are inviting participants to a specialist symposium on the subject of "Production of Warp Knitted Elastic Fabric". Industry experts, stakeholders and textile visionaries are invited to share their insights and experiences with the guests.

The aim of the symposium is to provide a platform where knowledge can be exchanged and cooperation intensified. The symposium offers a wide variety of technical presentations as well as best practice examples and showcases technologies and innovations in warp knitting technology.

Those interested in attending the symposium may contact Vinod Kumar (Brückner & Thies), Dipak Panhalkar (Groz-Beckert) or Apurva Jariwala (Karl Mayer) to register.

Source:

Groz-Beckert KG

31.10.2022

Cinte Techtextil China announces exhibitors for December Edition

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

From 7 – 9 December 2022, Cinte Techtextil China will welcome visitors sourcing solutions for 12 application areas of technical textiles and nonwovens at the National Exhibition and Convention Center in Shanghai.

A number of countries and regions are represented at the fair’s International Zone, with companies from Austria, Belgium, France, Germany, Hong Kong, Italy, the Netherlands, Spain, Sweden, Switzerland, Taiwan, and the US. Standout international exhibitors include:

  • TESTEX, an international, independent Swiss institute which specialises in the testing and certification of textile and leather products. The organisation is a founding member and official representative of the OEKO-TEX® Association, and will present their certification services at the fairground.
  • Cotton Council International (CCI) is a non-profit trade association that promotes US cotton fibre and manufactured cotton products, with their COTTON USA™ Mark. At this year’s fair they will showcase cotton spunlace fabric, wipes, kitchen tissues, facial masks, cosmetic removers, and more, with their products particularly applicable to Agrotech, Clothtech, Medtech, and Sporttech.
  • Graf + Cie AG is a subsidiary of the Rieter Group, and a leading supplier of clothing for carding and combs for combing machines in the short- and long-staple spinning industry. This year, the Swiss company will showcase stationary flats, and metallic card clothing for roller cards.
  • At the returning German Pavilion, buyers can source sought-after technical textiles and nonwovens that are renowned for their quality. The companies and expertise on display at this pavilion are endorsed by the Federal Republic of Germany, with several exhibitors highlighted below:
  • Brückner Textile Technologies GmbH & Co KG has developed machinery for the textile industry since 1949. Today, the company offers complete line systems for the dry finishing of both woven and knitted fabric, as well as for technical textiles, glass fibres, and floor coverings.
  • Perlon (Zhejiang) Co Ltd is part of a global group of companies that specialises in the manufacture of synthetic filaments, with factories in China, Germany, Poland, and the US. Their products have a diverse range of potential uses, largely categorised in the Agrotech and Indutech application areas.
  • IBENA Textilwerke GmbH produces various functional fabrics for Protech. At the fair, the company will be showcasing insulative, flame retardant (FR) textiles for firefighting and search & rescue services. Developed with DuPont™ aramid material, their FR properties will not diminish after washing or repeated use.

This year’s fair also sees the return of the Taiwan Zone. With support from the Taiwan Nonwoven Fabrics Industry Association, the area will showcase a range of industry leading nonwoven products and services, by brands such as KNH Enterprise, Nan Liu Enterprise, Unique Pretty Ind, and Web-Pro Corporation.

As a world’s largest manufacturer of technical textiles, China is home to a vast array of companies responsible for innovative products. Some domestic exhibitors to look out for are:

  • CTA Hi-Textiles Co Ltd, a high-tech enterprise controlled by China Textile Science Research Institute. In recent years, the company has developed several new textile composite materials, and their products are widely used in sectors such as national defence, policing and public security, medical protection, and engineering and manufacturing.
  • Sateri is one of the world’s largest producers of viscose fibre, with an annual capacity of 1.8 million metric tonnes. At their mills, they make yarn and fibre products applicable to sectors such as beauty, hygiene and personal care, medical, wipes, and protective wear.

To help international buyers stay connected with the Chinese market, Match Plus, the fair’s online business matching platform, will support foreign buyers achieve their sourcing goals despite travel limitations. Further information on Match Plus will be available at a later stage.

The fair’s product categories cover 12 application areas, which comprehensively span a full range of potential uses in modern technical textiles and nonwovens. These categories also cover the entire industry, from upstream technology and raw materials providers to finished fabrics, chemicals and other solutions.

22.02.2022

Baldwin partners with Blutec S.A. de C.V. to serve Mexico’s textile industry

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin Technology Company Inc. has forged a new partnership with Blutec S.A. de C.V., which now represents Baldwin’s full range of innovative spray systems and corona/plasma treaters for wovens, knits and nonwovens in Mexico.

Blutec is a leading agency in the textile sector, representing many of the most reputable textile machinery manufacturers worldwide. Present in the Mexican market for more than 25 years, Blutec is committed to collaborating with companies on the forefront of textile manufacturing technology, including Brückner, Mahlo, EFI Reggiani, Ferraro and, now, Baldwin.

Baldwin’s precision spray systems for finishing and remoistening use non-contact spray technology to provide optimal controlled coverage of the exact amount of liquids needed to achieve the specific characteristics of the fabric—saving customers time, money and valuable resources. Because only the required amounts of water and chemicals are applied, water consumption can be reduced by up to 50%, contributing to considerably improved productivity in the finishing process.
In addition, these solutions can process a wide range of low-viscosity water-based chemicals—such as softeners, antimicrobial agents, durable water repellents, flame retardants and more—for woven fabrics, knitted textiles and nonwovens.

Source:

Baldwin Technology Company Inc. / Barry-Wehmiller

BRÜCKNER presents products for the nonwovens industry at IDEA (c) Brückner Textile Technologies GmbH & Co. KG
SUPRA-FLOW BX double belt thermofusion oven for Nonwovens
18.02.2022

BRÜCKNER presents products for the nonwovens industry at IDEA

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For more than 70 years BRÜCKNER has been in the construction of drying and finishing lines for the textile and nonwovens industry. In the nonwovens sector, the company supplies worldwide thermofusion ovens, dryers, coating and heat-setting lines. On the IDEA 2022 trade fair in Miami, USA, BRÜCKNER presents together with its American representation FI-TECH new machine concepts and solutions for different applications in the mentioned fields.

The production of nonwovens always requires a bonding process after the nonwovens formation, where the loosely laid fibers are bonded to a resilient fiber composite. For this purpose, depending on the process, different ovens and dryers are used. BRÜCKNER supplies the necessary lines for all applications. The production program is completed by different impregnation and coating units as well as slitting and winding equipment. BRÜCKNER's customers produce geo nonwovens, filter media, hygiene and medical textiles or different fabrics for the automotive and transport industry

For the production of highloft nonwovens the double-belt thermofusion oven SUPRA-FLOW BX is used. This oven system operates according to the air-through principle and can be perfectly adapted to the product requirements in terms of flow speed, flow direction and temperature on a field-by-field basis.  
The SUPRA-FLOW BX can produce nonwovens up to a thickness of 280 mm and a basis weight of max. 8 kg/m². The available working widths vary between 2400 and 5200 mm at production speeds of up to 100 m/min.  
For geotextile projects, the POWER-FRAME stenter is usually used, which impresses with its uniformity in terms of temperature distribution as well as productivity. In addition, the fabric can be stretched in a targeted manner by transporting it in the stenter chain. This has a controlled influence on fabric width, fiber orientation and fabric shrinkage. Working widths of up to over 7 meters are not uncommon with geotextile finishing systems.

More information:
Brückner IDEA nonwovens
Source:

Brückner Textile Technologies GmbH & Co. KG

22.10.2021

VDMA Textile Machinery publishes position paper

In a position paper published on 22 October 2021, the companies organised in the VDMA Textile Machinery Association welcome the ambitions of the EU to promote climate protection, in particular the approach of combining the goals for the EU textile and clothing industry into a sector-specific strategy.

Up to now, the increasing textile consumption around the world, due to growing population and purchasing power has been accompanied by a rising use of resources. “The textile machinery companies organised in the VDMA are geared towards a functioning circular economy. With our highly efficient technologies we are an indispensable partner in this transition process”, explained Regina Brückner, Chairwoman of the VDMA Textile Machinery Association and Managing Associate of Brückner Trockentechnik.  

In a position paper published on 22 October 2021, the companies organised in the VDMA Textile Machinery Association welcome the ambitions of the EU to promote climate protection, in particular the approach of combining the goals for the EU textile and clothing industry into a sector-specific strategy.

Up to now, the increasing textile consumption around the world, due to growing population and purchasing power has been accompanied by a rising use of resources. “The textile machinery companies organised in the VDMA are geared towards a functioning circular economy. With our highly efficient technologies we are an indispensable partner in this transition process”, explained Regina Brückner, Chairwoman of the VDMA Textile Machinery Association and Managing Associate of Brückner Trockentechnik.  

In the new position paper, the executive board of the VDMA Textile Machinery Association emphasises that the new framework must be practicable. Ms Brückner said: “The EU must strike the right balance between necessary, yet also minimal, legislative regulation. A successful transition requires a level playing field which sets out fair rules for sustainability, thereby enabling European companies to nonetheless increase their international competitiveness.”

You can find the complete position paper in the attachment.

Source:

VDMA e. V

(c) Brückner Trockentechnik GmbH & Co. KG
12.08.2021

BRÜCKNER successful in Turkey with stenters

The Turkish company ARIKAN Mensucat Industry and Trade Inc. was founded in 1993 and is located in Kahramanmaraş, one of the southernmost cities of the country. Today, the family-owned company employs around 1,500 people and finishes around 55 tons of knitwear every day. In addition to many well-known Turkish fashion manufacturers, ARIKAN also supplies international manufacturers in Europe, Russia, the Gulf States and other leading international markets.

The Turkish company ARIKAN Mensucat Industry and Trade Inc. was founded in 1993 and is located in Kahramanmaraş, one of the southernmost cities of the country. Today, the family-owned company employs around 1,500 people and finishes around 55 tons of knitwear every day. In addition to many well-known Turkish fashion manufacturers, ARIKAN also supplies international manufacturers in Europe, Russia, the Gulf States and other leading international markets.

The German machinery manufacturer BRÜCKNER supported the Turkish company from the very beginning. From the foundation of the dyeing and finishing plant, BRÜCKNER supplied three stenters for the finishing of the high-quality knitted fabric in 2014. Two more lines followed in 2016. For decades, BRÜCKNER has been the market leader for the finishing of knitted fabric. Especially for very fine and elastic fabric, special line configurations and technological know-how are necessary to be able to produce a high-quality end product. During the drying and heat-setting process, for example, extremely accurate and uniform temperature distribution over the entire length and width of the dryer is essential. In the BRÜCKNER stenter this is achieved, among other things, by the alternating arrangement of the thermal zones every 1.5 meters and by the proven split-flow air system.

The machine operators at ARIKAN appreciate the easy control of BRÜCKNER lines. The visualization is intuitively designed and offers many auxiliary systems for an optimized production process. In addition, significant energy savings can be achieved with just a few changes to the machine parameters.

The management at ARIKAN attaches great importance to energy saving, especially in the fabric finishing department. The drying process is one of the most energy-intensive in the entire process chain, therefore the biggest savings can be made here. These have a direct impact on the manufacturing costs of the textiles and thus on competitiveness in the market. In the meantime, talks are already in progress for another BRÜCKNER line which will include a very special feature: a combined heating system for the dryer. For many customers - and so also for ARIKAN in Turkey - e.g. steam energy is available free or very cheap. With the combined heating system developed by BRÜCKNER it is possible to use this steam energy for heating up the dryer and thus to achieve significant savings. If the available steam is not sufficient for a running process, it is automatically switched over to gas heating. This mode of operation does not only have an effect on the energy costs, but also makes a considerable contribution to environmental protection.