From the Sector

In accordance with California’s Proper Labeling of Wet Wipes law (AB 818), state wastewater agencies and industry experts went deep to find out exactly what is passing through—and clogging up—municipal wastewater systems. The Responsible Flushing Alliance (RFA) alongside the California Association of Sanitation Agencies (CASA) and the Association of the Nonwoven Fabrics Industry (INDA) released the results from the largest known domestic sewage collection study conducted to reveal what’s really being flushed down the drain – and shouldn’t be.

“We took a forensic approach to this collection study, engaging industry and wastewater experts to examine our findings and determine what exactly is being flushed and how much of it,” said Adam Link, Executive Director at CASA, a co-sponsor of the Proper Labeling of Wet Wipes Law. “Now that we have the data to see what Californians are flushing and the types of non-flushable items that are causing issues within wastewater systems, local agencies can refine their public outreach and messaging to target specific problems and educate more efficiently.”

Collection and material investigation took place in October 2023 at two locations: Inland Empire Utilities Agency (IEUA) in Southern California and Central Contra Costa Sanitary District (Central San) in the greater San Francisco Bay Area in Northern California. Wastewater and wipes experts collected, sorted and identified more than 1,700 items pulled from the two locations during peak flow times. Kennedy Jenks, an independent engineering firm, designed the study and compiled the findings into the report.

Why Study What’s Being Flushed?
When products that aren’t meant to be flushed down the toilet wind up in the sewer system, it can cause serious threats to public and environmental health. In fact, estimates show that local public agencies throughout California (and the ratepayers they represent) are spending more than $47 million annually to repair wastewater treatment equipment and respond to sewer overflows caused by improper flushing.

“Part of keeping communities healthy requires not flushing things we shouldn’t,” said Lara Wyss, President of the RFA. “However, the data to support which non-flushable items to target as part of education campaigns has been lacking. That’s likely why when we surveyed Californians about what they are flushing, the results revealed that approximately 25% think baby wipes are flushable (which is never true) and 60% self-reported that they flushed something they knew they shouldn’t have.2 Our study results reinforce that finding, as more than 99% of materials collected were items that shouldn’t have been flushed.”

The breakdown of items collected from pipes at the two study locations included:
•    34.1% wipes labeled with the “Do Not Flush” symbol (baby wipes, cleaning wipes, makeup wipes, etc.)
•    64.9% other non-flushable items (paper towels, period products, trash, etc.)
•    0.9% wipes labeled as flushable

“We pulled material larger than 1-inch square directly from the bar screens, and it wasn’t until everything was sorted and identified that we could see what we actually had,” said Matt O’Sickey, Director of Education and Technical Affairs, INDA. “There were a lot of paper towels and baby wipes and all of the ‘Do Not Flush’ labeled wipes we collected were fully intact, showcasing why they should never be flushed.”

What Not to Flush—and How We Tell Consumers
According to the Proper Wet Wipes Labeling law, manufacturers of non-flushable wipes, including products such as baby wipes, cleaning wipes, makeup removal wipes and many others that are primarily used in a bathroom setting must include the “Do Not Flush” symbol on the front of the packaging.
The #FlushSmart consumer education campaign promotes the “Do Not Flush” symbol and provides information on what should and should not be flushed. The message shared with consumers is simple: Look for the “Do Not Flush” symbol on wipes packaging, and if you see it – throw the wipe out. Extrapolating from the results of this study, refraining from flushing “Do Not Flush” labeled wipes, paper products and feminine hygiene products would capture over 90% of items clogging sewers.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has appointed Dr Kristoffer Kortsen as Senior Materials and Process Scientist. He will report directly to R&D Manager, Dr Jonny Hunter, who joined FET in early 2023 in a growing Research and Development team.

Kortsen’s main area of work is in Gel Spinning of UHMWPE (Ultra-High Molecular Weight Polyethylene). His contribution will help provide gel spinning expertise and equipment in the near future to a range of industries including medical, aerospace, defence aerospace and marine.

He completed a Master’s in chemistry at KU Leuven, graduating magna cum laude in 2018. For his Master’s placement, he worked on the production of impact modifier additives for PVC at Kaneka Belgium. Continuing a partnership with this international chemical manufacturing company, he joined the Howdle group at the University of Nottingham for a PhD project looking into the industrial potential of scCO₂ dispersion polymerisations for additive production. After graduating, he worked in the Shaver group at the University of Manchester, developing a holistic approach to plastics recycling and sustainability across the many stakeholders in the field.

Twice a year ISPO recognizes innovative fibers, fabrics and components that are used to manufacture sports apparel. Two innovations from Hologenix have scored wins in the ISPO Textrends Fall/Winter 2025/2026 Awards: CELLIANT® with REPREVE® Nylon, introduced with textile solutions provider UNIFI®, makers of REPREVE®, and CELLIANT® Print. They were both Selections in the Fibers & Insulations Category.

CELLIANT with REPREVE Nylon
CELLIANT with REPREVE Nylon consists of CELLIANT infrared (IR) technology embedded into REPREVE. REPREVE creates high-quality fibers made from 100% recycled materials, including post-consumer plastic bottles and preconsumer waste. CELLIANT with REPREVE Nylon is strong and durable with great stretch and a silky hand. It is ideal for underwear, stockings, tights/leggings, socks, seamless knits, baselayers and many other categories. With CELLIANT’s ability to convert body heat into infrared energy, improving local circulation and cellular oxygenation, it also provides performance for outdoor/sportswear, outerwear, swimwear among other categories. This is the second carrier type for CELLIANT with REPREVE, as it was introduced in polyester last fall and won three awards.

CELLIANT Print
CELLIANT Print makes the natural blend of IR-generating bioceramic minerals more widely available from Hologenix as a printed coating, expanding the uses of the technology. Traditionally, CELLIANT has been embedded directly into fibers, yarns and fabrics. However, for its print applications, CELLIANT fine mineral powder can be adhered to many different fabric types as a topical coating, making CELLIANT Print a versatile and cost-effective solution. Key CELLIANT partners, such as Under Armour with their UA RUSH™ line, and KT Tape with its PRO Oxygen™ kinesiology tape utilize CELLIANT Print. Safe and CELLIANT® Print CELLIANT® with REPREVE® Nylon durable, CELLIANT Print has undergone mechanical testing for wash tests and can be confirmed to last the useful life of the product, for 50+ washes.

•    First production supercar created with Hypetex coloured carbon fibre
•    Paint-replacement technology reduces weight to enhance performance

British car manufacturer Briggs Automotive Company (BAC) has created a unique Hypetex coloured carbon fibre version of its Mono R, reducing the weight by removing the need for paint.  

The original BAC Mono R was created to be lighter and more powerful than the standard model, with 343bhp and 555kg total weight, equating to a power-to-weight ratio of 618bhp-per-tonne. By removing the need for paint coatings in this version, the net weight of the exterior is reduced compared to a painted shell, resulting in a further improved overall performance.

The car’s body was created using Hypetex’s titanium carbon fibre twill, and finished with a crystalized lacquer, offering a unique aesthetic finish. The ultra-lightweight supercar can accelerate from zero to 60mph in less than 2.5 seconds.  

Hypetex’s paint-replacement technology retains the visible weave, allowing for a bold design and a choice of colours without technical compromises, perfectly aligning with BAC’s initiatives to maximise performance whilst creating bespoke supercars. Paint generally adds 138 grams per metre squared, whereas Hypetex adds just 17 grams for the same area, offering an 8x weight saving.
This bespoke version of BAC’s single-seater Mono R was subject to BAC’s renowned BAC Bespoke programme, which ensures that no two Monos are the same. The client, a US-based collector, worked with BAC’s design team to design the car to their personal taste.   

Born out of Formula 1 technology, Hypetex offers manufacturers sustainable aesthetic materials with technical and efficiency benefits. This collaboration is an all-British success story, with the Hypetex carbon fibre body built by Formaplex, a leading UK-based manufacturing company who manufacture lightweight engineered solutions for top tier customers in Automotive, Aerospace and Defence markets. BAC’s supply chain is 95% UK-based.  

Hypetex continues to expand its growing portfolio of the use of coloured carbon fibre to add personalisation to the automotive field, with its material recently featured on the 2024 Ford Mustang Dark Horse.  

Die AZL Aachen GmbH, bekannter Innovationspartner für Industriekooperationen auf dem Gebiet der Leichtbautechnologieforschung, startet eines neuen Projekts mit dem Titel "Trends und Designfaktoren für Wasserstoffdruckbehälter". Das Projekt wird Fragestellungen der Industrie in Bezug auf die Wasserstoffspeicherung adressieren.

AZL Aachen GmbH, a recognized innovator in lightweight technologies research and industry collaboration, announces the initiation of a new project titled "Trends and Design Factors for Hydrogen Pressure Vessels". The project aims to address industry needs surrounding hydrogen storage.

Hydrogen has gained significant attention as a key technological solution for decarbonization, with high pressure storage and transportation emerging as vital components. Its applications extend from stationary storage solutions to mobile pressure vessels employed in sectors such as transportation and energy systems.

The AZL team, renowned for its high reputation in providing market and technology insights as well as developing component and production concepts in the format of Joint Partner Projects seeks for companies along the whole composite value chain interested in further developing their application know how in this economically highly relevant field.

The project will provide an in depth exploration of market insights, regulatory standards, and intellectual property landscapes. Beyond this, there is a dedicated focus on staying updated with state of the art and advancements in design, materials, and man ufacturing techniques.

An integral component of the project involves the creation of reference designs by AZL´s engineering team. The reference designs will encompass a variety of pressure vessel configurations and will consider a diverse range of materials and production concep ts.

With the scheduled project start in October 2023, and a project timeline of approximately nine months, AZL encourages companies active across the composite value chain to participate. Companies interested in participating or seeking further information should reach out directly to the AZL expert team.

RadiciGroup took part in the Phygital Sustainability Expo, this year in its fourth edition, which was held in Rome on 5 and 6 July. This event is entirely dedicated to the ecological transition of fashion and design brands through technological innovation. The show is an important platform for discussion on sustainable transition issues, involving Italian and international brands, fashion tech start-ups, representatives from the institutional, business and educational fields, and consumers.

RadiciGroup's participation in the event was further evidence of the Group's commitment to making a contribution to sustainability and circularity in the fashion and textile industry, in collaboration with all the other players in the supply chain. During the narrated fashion show, held on the evening of Wednesday, 5 July, in the evocative archaeological complex of the Imperial Forum Museum, RadiciGroup presented a maxi dress made of Biofeel® eleven, a yarn of completely natural origin featuring high technical, aesthetic and environmental performance. This yarn is produced starting from a small bean cultivated in India on semi-arid land and thus does not compete with human food production. These beans yield a special oil ideal for obtaining biopolymers, such as the one produced by Arkema and spun into yarn at RadiciGroup in Italy.

The dress is not only made from a low environmental impact raw material, but is also an example of ecodesign: the garment was realized on a Shima Seiki WholeGarment knitting machine, where the entire item was knit directly from spools of Biofeel® eleven yarn, bypassing the traditional stages of weaving and tailoring. It is a zero-waste process, as only the quantity of yarn strictly needed for the garment is used.

Biofeel® eleven yarn endows the dress with unique characteristics, including low moisture absorption, greater lightness and high resistance and durability. Besides being 100% biobased, the yarn is also 100% recyclable because it is made of a mono-material polymer, which facilitates its end-of-life recycling and processing into new materials suitable for any application requiring high performance.

"ITA Aachen and ITA Augsburg are part of the ITA Group International Centre for Sustainable Textiles. Experience our textile innovations at two exhibition booths," explains ITA Institute Director Professor Dr. Thomas Gries. "See our ring spinning tester at booth H3-B304, which spins recycled fibres sustainably and individually in a previously impossible fineness. In addition, there is digital yarn monitoring, which enables new market potentials. Get an idea of the Recycling Atelier of ITA Augsburg at booth H3-A207 and see the textile cycle from used textile to solution steps for industrial implementation together with industry partners. Join us on the Walk4Recycling and follow the path from used textile to a new knitted pullover on a tour of the trade fair. This is how we live up to our claim as the ITA Group: sustainable - digital - individual."

ITA Aachen - Digital ring spinning tester for recycled fibres enables spinning of fine yarns with high recycled fibres content
The Institut für Textiltechnik of RWTH Aachen University (ITA) will be exhibiting a digital ring spinning tester, which spins recycled fibres directly and conventionally with a particularly high content of 60-70 percent. Up to now, recycled yarns have mainly been rotor-spun in this blend ratio. This results in rather coarse yarns and is not suitable for finer textiles such as outerwear. Ring spinning of recycled yarns now enables the spinning of finer yarns and thus a higher application level for recycled materials.

A unique selling point of the ITA ring spinning tester is the simultaneous spinning in the direct spinning process from the sliver and in the classic ring spinning process. For this purpose, the strength and elongation of the spun yarn are determined online and digitally for the first time. The real-time measurement allows process parameters and yarn properties to be adjusted iteratively and quickly. The ring spinning tester was upgraded from an existing tester to Industry 4.0 standard and is operated via a tablet. Operation via tablet enables the adjustment of process parameters including online quality monitoring remotely from anywhere in the world.
 
For this purpose, the ring spinning tester is also able to produce fine ring spun yarns. These yarns made from recycled material opens up a multitude of further fields of application for woven and knitted goods. Now, for example, clothing and technical textiles can be made from recycled material, the production of which was not possible before - such as outerwear made from recycled material. The development of new industries and fields of application opens up new market potential for recycled yarns - also and especially for processing in Europe. This creates the opportunity to preserve key technologies and jobs in cost-intensive locations.

ITA Augsburg - Recycling Atelier: Walk4Recycling
The Recycling Atelier of the Institut für Textiltechnik Augsburg gGmbH on stand H3-A207 presents the textile recycling from used textiles into new products via the various process steps and, together with the industrial partners, opens up solution paths for industrial implementation.

Under the headline "Walk4Recycling", a tour of the fair shows the cycle of used textiles from used knitwear into a new knitted pullover via a ring yarn made from a blend of 65 percent recycled cotton and 35 percent virgin polyester. The key innovation here is the high proportion of recycled fibres from post-consumer textiles for a ring yarn of this fineness. Today, mainly coarse rotor yarns for low-quality textiles are spun from these materials. The industrial partners participating in the Walk4Recycling are partners of the Recycling Atelier and contribute with their technologies to the fact that fibre material from old clothes can be processed in various process stages into a yarn of new value and high-quality ready-made garments.

The Walk4Recycling offers visitors the opportunity to experience a complete recycling cycle with the numerous process stages from tearing the old textiles, preparing and spinning the fibres and knitting a new jumper live during the fair. Get detailed information on the mechanical recycling of clothing via QR code, website and flyer about the participating exhibitors and their machines and technologies. A short movie will give you additional insights into the various processes involved in the production of the jumper.

The Organic Cotton & Textiles Conference, taking place in Indore, India over three days, from February 27-March 1^st is set to bring together a diverse group of key players from every part of the textile supply chain. Farmers, farm groups, industry representatives, non-profits, academics, suppliers, brands, certifiers, government representatives and policymakers will join nearly 200 guests at the multi-day event. The aim is to foster collaboration, explore innovative ideas, listen to those on the ground and focus discussions to develop a shared vision to boost the organic textile supply chain worldwide.

Co-hosted by  OCA, GOTS, and IFOAM - Organics International, the conference will address a range of subjects including social conditions, transparency through innovation, scaling up organic through investment, as well as sessions tackling certification, decent work and environmental impacts. The event also gives voice to farmers, who join as panellists, in a dedicated Q&A session with seven organic cotton farmers from the region. On the third day, organised by OCA, the organic farmers will welcome attendees to their communities during field trips west to Petlawad to witness organic practices at ground level.

“By addressing these important issues and fostering a dialogue between participants, the conference aims to develop innovative solutions that can drive progress and growth in the sector", says Bart Vollaard, Executive Director of OCA. "We are thrilled to be joining forces with GOTS and IFOAM to create positive change in the organic textile sector."

“Together with IFOAM - Organics International and OCA, GOTS wants to increase visibility of organic and at the same time enhance integrity of organic fibres and textiles. This conference shall serve to strengthen the sector by addressing obstacles and work on effective solutions, in consultation with all relevant and committed stakeholders”, notes Claudia Kersten, Managing Director of GOTS.

Sarah Compson of the IFOAM - Organics International World Board adds “Organic agriculture directly addresses some of the most pressing challenges of our time. IFOAM - Organics International is delighted to collaborate with OCA and GOTS to bring together people from across the whole textile sector and address the barriers and opportunities for scaling organic cotton production worldwide.”

With a strong line-up of notable speakers and guests in a supportive and engaging atmosphere, and a unique approach that connects participants from every step of the supply chain, the Organic Cotton & Textiles Conference is set to be a valuable and transformative event for key stakeholders involved in the organic textile industry.

Valérius 360 wanted to make a sustainable, circular approach possible in the fashion industry. Working together with Trützschler, a collaborative project has now achieved high-quality recycled yarn – opening up massive potential to drive measurable progress toward a circular and sustainable textile industry.

Testing at the Trützschler Technical Center
The team from Valérius 360 wanted to find ways of improving the processes for yarns made from 50 % recycled and 50 % virgin cotton (Ne30). In particular, it was seeking ways to reduce thick and thin spots, which disturb the appearance of the textile surface.

At the Trützschler Technical Center in Mönchengladbach, they conducted special trials that showed that using a direct spinning process for this application delivers much better results than a process with a draw frame passage for rotor yarns.

In direct spinning, the sliver from the card is directly drawn in the draw frame which is integrated in the can stock. This involves one less process step than using an autoleveller draw frame, while also saving space and giving staff more time for other operations.

On-site support from Trützschler Customer Service
The team from Valérius 360 also received in-house training from the Trützschler Customer Service department. Together, they analyzed and significantly improved the process at the Valérius 360 production site. This helped to bring yarns made from recycled raw materials up to the required level of the 50% Usterstatistics. This is the reference level for yarns made from virgin raw materials. Accordingly, 50 % of all yarn producers with raw cotton for rotor yarns and comparable yarn counts produce a poorer quality.

The Lenzing Group, a leading supplier of sustainably produced specialty fibers, and Renewcell, the Swedish textile-to-textile recycling pioneer, have signed a multi-year supply agreement to accelerate the transition of the textile industry from a linear to a circular business model. The agreement contains the sale of 80,000 to 100,000 tonnes of Renewcell’s 100 per cent recycled textile Circulose® dissolving pulp to Lenzing over a five-year period, for use in the production of cellulosic fibers for fashion and other textile applications.

“The textile industry must change. By signing the agreement with Swedish textile-to-textile recycling company Renewcell, Lenzing is able to further integrate recycling and accelerate the transition of the textile industry from linear to circular. As champions of sustainability, we know that moving towards a circular economy is vital to address the enormous textile waste challenges of the industry”, says Christian Skilich, Chief Pulp Officer of the Lenzing Group.

“Lenzing is a major player in our industry, with an inspiring track record of path-breaking technical excellence and sustainability leadership. Our new partnership fits perfectly into Renewcell’s strategy to accelerate the scale-up of circular materials by collaborating with fashion’s most important players. We are more than pleased to join forces with Lenzing with the shared goal of making fashion circular.” said Patrik Lundström, CEO of Renewcell, in a comment on the agreement.

Canopy, a not-for-profit environmental organization dedicated to protecting forests, species, and climate, welcomes the agreement between Lenzing and Renewcell.
“Accelerating the transition to low-impact, circular production is the challenge of the decade for the fashion industry. That is why this partnership between Renewcell and Lenzing is so refreshing – it will bring low-carbon Next Gen solutions to market at scale,” exclaimed Nicole Rycroft, Executive Director of Canopy. “With the climate and biodiversity clocks ticking, the race to circularity is one we need all companies to win.”
 
It is an essential part of Lenzing’s corporate strategy and ambitious sustainability targets to become a true champion of circularity and to offer TENCEL™ and LENZING™ ECOVERO™ branded specialty textile fibers with up to 50 percent post-consumer recycled content on a commercial scale by 2025. To reach this goal Lenzing partners with recycling pioneers like Renewcell.
Circulose® originates 100 per cent from textile waste, like old jeans and production scraps, and turns into dissolving pulp. It transforms textile waste and production scrap into new high-quality textile products.