From the Sector

Reset
571 results
DITF: CO2-negative construction with new composite material Photo: DITF
Structure of the wall element
20.03.2024

DITF: CO2-negative construction with new composite material

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

The DITF is leading the joint project "DACCUS-Pre*". The basic idea of the project is to develop a new building material that stores carbon in the long term and removes more CO2 from the atmosphere than is emitted during its production.       

In collaboration with the company TechnoCarbon Technologies, the project is now well advanced - a first demonstrator in the form of a house wall element has been realized. It consists of three materials: Natural stone, carbon fibers and biochar. Each component contributes in a different way to the negative CO2 balance of the material:

Two slabs of natural stone form the exposed walls of the wall element. The mechanical processing of the material, i.e. sawing in stone cutting machines, produces significant quantities of stone dust. This is very reactive due to its large specific surface area. Silicate weathering of the rock dust permanently binds a large amount of CO2 from the atmosphere.

Carbon fibers in the form of technical fabrics reinforce the side walls of the wall elements. They absorb tensile forces and are intended to stabilize the building material in the same way as reinforcing steel in concrete. The carbon fibers used are bio-based, produced from biomass. Lignin-based carbon fibers, which have long been technically optimized at DITF Denkendorf, are particularly suitable for this application: They are inexpensive due to low raw material costs and have a high carbon yield. In addition, unlike reinforcing steel, they are not susceptible to oxidation and therefore last much longer. Although carbon fibers are more energy-intensive to produce than steel, as used in reinforced concrete, only a small amount is needed for use in building materials. As a result, the energy and CO2 balance is much better than for reinforced concrete. By using solar heat and biomass to produce the carbon fibers and the weathering of the stone dust, the CO2 balance of the new building material is actually negative, making it possible to construct CO2-negative buildings.

The third component of the new building material is biochar. This is used as a filler between the two rock slabs. The char acts as an effective insulating material. It is also a permanent source of CO2 storage, which plays a significant role in the CO2 balance of the entire wall element.

From a technical point of view, the already realized demonstrator, a wall element for structural engineering, is well developed. The natural stone used is a gabbro from India, which has a high-quality appearance and is suitable for high loads. This has been proven in load tests.  Bio-based carbon fibers serve as the top layer of the stone slabs. The biochar from Convoris GmbH is characterized by particularly good thermal insulation values.

The CO2 balance of a house wall made of the new material has been calculated and compared with that of conventional reinforced concrete. This results in a difference in the CO2 balance of 157 CO2 equivalents per square meter of house wall. A significant saving!

* (Methods for removing atmospheric carbon dioxide (Carbon Dioxide Removal) by Direct Air Carbon Capture, Utilization and Sustainable Storage after Use (DACCUS).

Source:

Deutsche Institute für Textil- und Faserforschung

18.03.2024

Autoneum: Increase in revenue and profit in 2023

Autoneum significantly improved revenue in local currencies by 34.8% in 2023 compared to the previous year, supported by inorganic growth and a positive market environment. Consolidated in Swiss francs, revenue increased by 27.6% to CHF 2 302.3 million. The acquisition of Borgers Automotive already made a positive contribution to earnings and value in the first year and Business Group North America achieved a turnaround. EBIT adjusted for one-time effects more than doubled year-on-year to CHF 99.2 million and, with an EBIT margin of 4.3%, was at the upper end of the guidance. Net profit for the full year 2023 increased by an impressive CHF 50.2 million to CHF 61.1 million. Based on the positive net results, the Board of Directors is proposing a dividend of CHF 2.50 per share.

Autoneum significantly improved revenue in local currencies by 34.8% in 2023 compared to the previous year, supported by inorganic growth and a positive market environment. Consolidated in Swiss francs, revenue increased by 27.6% to CHF 2 302.3 million. The acquisition of Borgers Automotive already made a positive contribution to earnings and value in the first year and Business Group North America achieved a turnaround. EBIT adjusted for one-time effects more than doubled year-on-year to CHF 99.2 million and, with an EBIT margin of 4.3%, was at the upper end of the guidance. Net profit for the full year 2023 increased by an impressive CHF 50.2 million to CHF 61.1 million. Based on the positive net results, the Board of Directors is proposing a dividend of CHF 2.50 per share.

Outlook
According to forecasts, worldwide automobile production will be somewhat restrained in 2024 and may even decline slightly compared with 2023. Based on these market forecasts1, Autoneum expects revenue in 2024 of CHF 2.3 billion to 2.5 billion. The Company anticipates an EBIT margin of 4.5–5.5% and free cash flow in the high upper double-digit million range for 2024.

1 Source: S&P Global Light Vehicle Production Forecast of February 16, 2024.

More information:
Autoneum financial year 2023
Source:

Autoneum Management AG

15.03.2024

TMAS: Digitised solutions at Techtextil and Texprocess

Members of TMAS – the Swedish textile machinery association – will display technologies in alignment with the theme of digitalisation at the forthcoming Techtextil and Texprocess 2024 exhibitions, taking place in Frankfurt from April 23-26th.

Automatic handling
The fully automated and digitised handling solutions for finished garments, home textiles and furniture of Eton Systems, for example, will be demonstrated at Texprocess.

Designed to increase value-added time in production by eliminating manual transportation and minimising handling, the individually addressable product carriers are fully managed and controlled by the latest ETONingenious™ software. This web based real-time data collection and information system continuously accumulates, processes and makes all production information instantly available to supervisors, quality control personnel and management.

Members of TMAS – the Swedish textile machinery association – will display technologies in alignment with the theme of digitalisation at the forthcoming Techtextil and Texprocess 2024 exhibitions, taking place in Frankfurt from April 23-26th.

Automatic handling
The fully automated and digitised handling solutions for finished garments, home textiles and furniture of Eton Systems, for example, will be demonstrated at Texprocess.

Designed to increase value-added time in production by eliminating manual transportation and minimising handling, the individually addressable product carriers are fully managed and controlled by the latest ETONingenious™ software. This web based real-time data collection and information system continuously accumulates, processes and makes all production information instantly available to supervisors, quality control personnel and management.

Bespoke seams
Svegea will demonstrate its EC 300-XS colarette technology, which is used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

The EC 300-XS collarette cutter on show in Frankfurt is equipped with the latest E-Drive II system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process. An accompanying FA 350 fully automatic roll slitting machine will also be demonstrated.

Digital finishing
At Techtextil meanwhile, Baldwin Technology Co. will provide full details of how its highly digitised TexCoat G4 non-contact spray technology for textile finishing and remoistening not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to customer requirements in terms of single and double-sided finishing applications.

TexCoat G4 can reduce water consumption and chemical usage by as much as 50% compared to traditional padding application processes.

Yarn tension
Celebrating its 60th anniversary this year, Eltex will display the latest Eltex EyETM system for the continuous monitoring of yarn tension on warp beams.

The Eltex EyETM eliminates problems when warping, and also in subsequent weaving or tufting processes, monitoring the yarn tension on all positions in real-time and enabling a minimum and maximum allowable tension value it be set. If any yarn’s tension falls outside these values the operator can be warned or the machine stopped.

The Eltex ACT and ACT-R units meanwhile go beyond yarn tension monitoring to actually control yarn tension. This extends the application range greatly. The plug and play system automatically compensates for any differences in yarn tension that arise, for example from irregularities in yarn packages.

Accumulated know-how
Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

The company will present its latest X4 yarn feeders with integrated accessory displays (TED) as a new standard, as well as launching its own e-commerce platform – iroonline.com.

The TED function enables weft tension settings to be transferred from one machine to another, enabling a fast start-up the next time the same article is woven. The position of the S-Flex Tensioner is constantly monitored by an internal sensor – even if adjustment is made during power off.

X4 feeders are also available with integrated active tension control (ATC-W) as an option. With the ATC-W active tension control, the required tension is easily set and monitored on the integrated display. Once set, the system constantly regulates itself, ensuring consistent yarn tension during the weaving process which is constantly and accurately measured by the ATC sensor unit, sending a signal to the ATC operator unit resulting in consistently stable yarn tension at the required level.

Source:

TMAS - Swedish textile machinery association

Winder manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy Photo: ITA – Institut für Textiltechnik of RWTH Aachen University
Winder manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy
06.03.2024

ITA: Unique Winder for Elastic Filament Yarn Development

Since March 1st 2024, the technical centre of Institut für Textiltechnik of RWTH Aachen University (ITA) has been equipped with an additional winder.

This globally unique winder has been manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy, and enables the development of elastic yarns for numerous and innovative areas of application. Monofilament and multifilament yarns can be spun within a speed range of 100 to 3,200 m/min on bobbins with an industrial standard size of 73.6 mm x 83.8 mm x 115.5 mm.

The use of these bobbins enables immediate further processing along the textile process chain, for example in production of elastic combination yarns or knitting. Due to the high flexibility of this winder in combination with the available spinning plants at ITA, testing is possible with material amounts starting from a few hundred grams up to hundreds of kilograms.

Since March 1st 2024, the technical centre of Institut für Textiltechnik of RWTH Aachen University (ITA) has been equipped with an additional winder.

This globally unique winder has been manufactured by Comoli Fermo S.r.l, Paruzzaro, Italy, and enables the development of elastic yarns for numerous and innovative areas of application. Monofilament and multifilament yarns can be spun within a speed range of 100 to 3,200 m/min on bobbins with an industrial standard size of 73.6 mm x 83.8 mm x 115.5 mm.

The use of these bobbins enables immediate further processing along the textile process chain, for example in production of elastic combination yarns or knitting. Due to the high flexibility of this winder in combination with the available spinning plants at ITA, testing is possible with material amounts starting from a few hundred grams up to hundreds of kilograms.

Source:

ITA – Institut für Textiltechnik of RWTH Aachen University

06.03.2024

SHIMA SEIKI at FIMEC 2024 in Brazil

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

The company is showing its new SWG-XR® WHOLEGARMENT® knitting machine for the first time in Brazil. SWG-XR® features 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles, and will be knitting WHOLEGARMENT® sportswear at FIMEC. For conventional shaped knitting, the compact SVR®093 machine with a short knitting width is specially developed for knitting shoe uppers, while the workhorse N.SSR®112 shaping machine features the latest garment knitting technology in an economical yet reliable package.
Both SVR®093 and N.SSR®112 will be knitting shoe uppers at FIMEC while utilizing the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. The classic SFG® seamless glove knitting machine will be knitting safety-oriented work gloves to round out SHIMA SEIKI’s multi-faceted display.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design
and simulation suited to shoe production.

More information:
Shima Seiki FIMEC shoes Brazil
Source:

SHIMA SEIKI MFG., LTD

26.02.2024

SHIMA SEIKI at Knit-Tech 2024

SHIMA SEIKI MFG., LTD. is exhibiting at the Knit-Tech 2024 Exhibition (1st-4th March 2024) in Tiruppur, India, in cooperation with its partner Universal MEP Projects & Engineering Services Ltd.

SHIMA SEIKI will be introducing the latest computerized flat knitting equipment to this market as proposals for sustainable production through innovative shaping technology and the latest digital solutions.

SHIMA SEIKI's lineup at Knit-Tech is headed by its workhorse N.SSR®112 garment shaping machine in 14 gauge. N.SSR®112 features innovations such as the R2CARRIAGE®, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Shown for the first time is SHIMA SEIKI's new N.SSR®072 computerized jacquard collar machine that can produce shaped collars efficiently based on computer-generated designs.

SHIMA SEIKI MFG., LTD. is exhibiting at the Knit-Tech 2024 Exhibition (1st-4th March 2024) in Tiruppur, India, in cooperation with its partner Universal MEP Projects & Engineering Services Ltd.

SHIMA SEIKI will be introducing the latest computerized flat knitting equipment to this market as proposals for sustainable production through innovative shaping technology and the latest digital solutions.

SHIMA SEIKI's lineup at Knit-Tech is headed by its workhorse N.SSR®112 garment shaping machine in 14 gauge. N.SSR®112 features innovations such as the R2CARRIAGE®, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Shown for the first time is SHIMA SEIKI's new N.SSR®072 computerized jacquard collar machine that can produce shaped collars efficiently based on computer-generated designs.

Design is demonstrated on SHIMA SEIKI's SDS®-ONE APEX4 design system. At the core of the company’s "Total Fashion System" concept, it provides support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion.

Source:

SHIMA SEIKI MFG., LTD

60th anniversary of Eltex of Sweden AB (c) Eltex of Sweden
21.02.2024

60th anniversary of Eltex of Sweden AB

Eltex of Sweden, a pioneer in the adoption of electronic sensors by the weaving machinery industry, is marking its 60th anniversary this month.

The electronic detection of broken or missing weft yarns during production was the problem Eltex founders Åke Rydborn and Ragnar Henriksson set out to solve with the development of the world’s first electronic weft-stop-motion. Its potential was recognised on its introduction at the 1963 ITMA exhibition in Hannover, Germany, leading to the foundation of the company in a modest 12-square-metre workshop in Älmhult, Sweden, in February 1964.

Eltex of Sweden, a pioneer in the adoption of electronic sensors by the weaving machinery industry, is marking its 60th anniversary this month.

The electronic detection of broken or missing weft yarns during production was the problem Eltex founders Åke Rydborn and Ragnar Henriksson set out to solve with the development of the world’s first electronic weft-stop-motion. Its potential was recognised on its introduction at the 1963 ITMA exhibition in Hannover, Germany, leading to the foundation of the company in a modest 12-square-metre workshop in Älmhult, Sweden, in February 1964.

By 1968 the company was operating from a modern 3,000-square-metre plant and beginning to establish a global presence, introducing the first all-in-one printed circuit board (PCB) for its sensor systems in 1971. As exports increased, further Eltex operations were established in the USA and Ireland and the company expanded its product range including energy control devices, temperature and humidity loggers, food handling safety systems, and military grade battery chargers. Further textile milestones in parallel to advances in weaving technology included optical arrival detectors for air-jet weaving machines at the beginning of the 1980s, and the QTV system for warp preparation, which introduced digital stop-motion control to the industry at the start of the 1990s. In 2009, the company branched out into carpet tufting, first with the CoTS clamp-on tube sensor for tufting machines, followed by the Compact sensor for tufting machines in 2013. In 2019 the Compact II further cemented the company’s position in this sector.

Newly developed Eltex EyETM and ACT-R
Most recently, Eltex has launched the Eltex EyETM system for the monitoring of yarn tension on warp beams. Not only does it eliminate problems when warping, but also in the subsequent weaving or tufting processes. Eltex EyETM monitors the yarn tension on all positions in real-time and a minimum and maximum allowable tension value can be set. If any yarn’s tension falls outside these values the operator can be warned or the machine stopped.

The Eltex ACT and ACT-R units meanwhile go beyond yarn tension monitoring to actually control yarn tension. This extends the application range greatly. The plug and play system automatically compensates for any differences in yarn tension that arise, for example from irregularities in yarn packages.

Eltex has been owned by Brian Hicks, Seamus O’Dwyer and Jonathan Bell since 2007, following a management buy-out and the subsequent formation of Eltex Global Holdings in Ireland. Today, its head office, Eltex of Sweden AB, is in Osby, Sweden where it provides research and development, administration and global sales for the group. Eltex Manufacturing in Ireland is now the group’s primary production facility and Eltex US, Inc. provides sales and service for North America.

Source:

Eltex of Sweden

20.02.2024

Italian Textile Machinery: 4Q 2023 Orders Remain Stationary

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

For the whole 2023 year, the index declined 25% overall compared to the 2022 average (absolute index of 82.4). On the home front however, the index dropped 24% (absolute index of 124.5), while slipping 25% abroad (absolute index of 78.4).

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

For the whole 2023 year, the index declined 25% overall compared to the 2022 average (absolute index of 82.4). On the home front however, the index dropped 24% (absolute index of 124.5), while slipping 25% abroad (absolute index of 78.4).

ACIMIT president Marco Salvadè commented the data: “The orders index for October – December 2023, as elaborated by our Economics Department, confirms an intake of orders that is still weak, with a negative trend in demand for machinery that is ongoing for the domestic market.” Nonetheless, the orders index abroad shows a slight increase. “We estimate that the global geopolitical context is still a source of concern,” continued Salvadè, specifying that, “For the first nine months of 2023, Italian exports on major global markets (i.e. China, Turkey, India and the United States of America), confirm a widespread decline. However, some positive signs emerged in the fourth quarter of last year, as reflected by the latest orders index. For 2024 we expect a consolidation of this trend reversal.”

More information:
ACIMIT
Source:

ACIMIT, the Association of Italian Textile Machinery Manufacturers

ACIMIT: Italian textile machinery orders remain stationary (c) ACIMIT
19.02.2024

ACIMIT: Italian textile machinery orders remain stationary

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

In the fourth quarter of 2023 Italian textile machinery orders index, drawn up by the Economics Department of ACIMIT, the Association of Italian Textile Machinery Manufacturers, appears to be stationary compared to data recorded for the same period in 2022. In terms of absolute value, the index stood at 82.4 points (basis: 2015=100).

This is the result of an upswing in orders from foreign markets, counterbalanced by declining orders on the domestic front. While orders in Italy decreased at 18% rate, a 4% increase was observed abroad. The absolute value of the index on foreign markets amounted to 77.9 points, whereas it came in at 126.2 points domestically. Overall for the fourth quarter, the average order backlog yielded 3.7 months of assured production.

For the whole 2023 year, the index declined 25% overall compared to the 2022 average (absolute index of 82.4). On the home front however, the index dropped 24% (absolute index of 124.5), while slipping 25% abroad (absolute index of 78.4).
 
ACIMIT president Marco Salvadè commented: "The orders index for October – December 2023, as elaborated by our Economics Department, confirms an intake of orders that is still weak, with a negative trend in demand for machinery that is ongoing for the domestic market."

Nonetheless, the orders index abroad shows a slight increase. We estimate that the global geopolitical context is still a source of concern,” continued Salvadè, specifying that, “For the first nine months of 2023, Italian exports on major global markets (i.e. China, Turkey, India and the United States of America), confirm a widespread decline. However, some positive signs emerged in the fourth quarter of last year, as reflected by the latest orders index. For 2024 we expect a consolidation of this trend reversal."

Source:

ACIMIT - Association of Italian Textile Machinery Manufacturers

(c) Swiss Textile Machinery Swissmem
16.02.2024

Recycled fibres: Swiss manufacturers for circularity

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Many end-users now expect recycled materials to be in textile products they purchase – and this is driving innovation throughout the industry. However, there are still many technical and economic issues facing yarn and fabric producers using recycled resources. Members of the Swiss Textile Machinery Association offer some effective solutions to these challenges.

Synthetic recycled materials such as PET can usually be treated similarly to new yarn, but there are additional complexities where natural fibres like wool and cotton are involved. Today, there’s a trend towards mechanically recycled wool and cotton fibres.

Spinning recycled cotton
The use of mechanically recycled fibres in spinning brings specific quality considerations: they have higher levels of short fibres and neps – and may often be colored, particularly if post-consumer material is used. It’s also true that recycled yarns have limitations in terms of fineness. The Uster Statistics 2023 edition features an extended range of fibre data, supporting sustainability goals, including benchmarks for blends of virgin and recycled cotton.
In general, short fibres such as those in recycled material can easily be handled by rotor spinning machines. For ring spinning, the shorter the fibres, the more difficult it is to guide them through the drafting zone to integrate them into the yarn body. Still, for wider yarn counts and higher yarn quality, the focus is now shifting to ring spinning. The presence of short fibres is a challenge, but Rieter offers solutions to address this issue.

Knitting recycled wool
For recycling, wool fibres undergo mechanical procedures such as shredding, cutting, and re-spinning, influencing the quality and characteristics of the resulting yarn. These operations remove the natural scales and variations in fibre length of the wool, causing a decrease in the overall strength and durability of the recycled yarn. This makes the yarn more prone to breakage, especially under the tension exerted during knitting.

Adapting to process recycled materials often requires adjustments to existing machinery. Knitting machines must be equipped with positive yarn suppliers to control fibre tension. Steiger engages in continuous testing of new yarns on the market, to check their suitability for processing on knitting machines. For satisfactory quality, the challenges intensify, with natural yarns requiring careful consideration and adaptation in the knitting processes.

From fibres to nonwovens
Nonwovens technology was born partly from the idea of recycling to reduce manufacturing costs and to process textile waste and previously unusable materials into fabric structures. Nonwovens production lines, where fibre webs are bonded mechanically, thermally or chemically, can easily process almost all mechanically and chemically recycled fibres.

Autefa Solutions offers nonwovens lines from a single source, enabling products such as liners, wipes, wadding and insulation to be produced in a true closed loop. Fibres are often used up to four times for one product.

Recycling: total strategy
Great services, technology and machines from members of Swiss Textile Machinery support the efforts of the circular economy to process recycled fibres. The machines incorporate the know-how of several decades, with the innovative power and quality standards in production and materials.
Stäubli’s global ESG (environmental, social & governance) strategy defines KPIs in the context of energy consumption, machine longevity and the recycling capacity in production units worldwide, as well in terms of machinery recyclability. The machine recyclability of automatic drawing in machines, weaving systems and jacquard machines ranges from 96 to 99%.

Source:

Swiss Textile Machinery Swissmem

07.02.2024

Rieter wins Patent Dispute in China

In a judgment in December 2023, the Supreme People’s Court of the People’s Republic of China ruled in favor of Rieter in a legal dispute. The case concerned the infringement of a Rieter patent by a competitor’s draw frame. Rieter protects its innovations with patents and registered designs and consistently takes action against infringements of its intellectual property.

Rieter draw frames are known for their stable operation with high sliver quality and productivity. Scanning precision and autoleveling dynamics ensure outstanding sliver evenness and thus the production of high-quality yarns. Draw frames have also been the subject of a patent litigation by Rieter in China at various levels of jurisdiction. Rieter had sued a competitor for unauthorized use of its patented draw frame technology.

In the summer of 2022, the Shanghai Intellectual Property Court confirmed the patent infringement identified by Rieter and prohibited the accused competitor from continuing to use Rieter’s patented technology. The infringing party was also ordered to pay damages to Rieter.

In a judgment in December 2023, the Supreme People’s Court of the People’s Republic of China ruled in favor of Rieter in a legal dispute. The case concerned the infringement of a Rieter patent by a competitor’s draw frame. Rieter protects its innovations with patents and registered designs and consistently takes action against infringements of its intellectual property.

Rieter draw frames are known for their stable operation with high sliver quality and productivity. Scanning precision and autoleveling dynamics ensure outstanding sliver evenness and thus the production of high-quality yarns. Draw frames have also been the subject of a patent litigation by Rieter in China at various levels of jurisdiction. Rieter had sued a competitor for unauthorized use of its patented draw frame technology.

In the summer of 2022, the Shanghai Intellectual Property Court confirmed the patent infringement identified by Rieter and prohibited the accused competitor from continuing to use Rieter’s patented technology. The infringing party was also ordered to pay damages to Rieter.

The culpable competitor then appealed the decision of the Shanghai court to the Supreme People’s Court of the People’s Republic of China.

In December 2023, the Supreme Court of China in Beijing upheld the Shanghai decision, confirming that the patent had been infringed. As a result, Rieter’s competitor is prohibited from selling the infringing machine types and is required to pay the damages determined by the court.

This Supreme Court decision represents a major success for Rieter in defending its proprietary technologies in China. It is further proof that foreign companies can effectively defend their intellectual property in China.

As the technology leader in spinning machinery manufacturing, Rieter invests around 5% of its turnover annually in research and development. Rieter protects its innovative products with patents and registered designs and takes consistent action against infringements of industrial property rights.

More information:
legal dispute patent China
Source:

Rieter AG

06.02.2024

Hohenstein future part of the AI hotspot IPAI

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The testing service provider and research partner Hohenstein is joining the Innovation Park for Artificial Intelligence (IPAI) in Heilbronn. There are already points of contact with AI applications in some interdisciplinary research projects. In addition, there is the cooperation with the Munich-based start-up Sizekick and its AI-based technology for size recommendations, which aims to reduce size-related returns in online fashion retail.

"We expect the connection to the IPAI AI network to provide us with valuable impulses to remain fit for the future," explains Hohenstein CEO Dr. Timo Hammer, "This unique platform brings together a wide variety of players with their experience and knowledge. New ideas, projects and even products can be generated with great dynamism in the network as an intelligent response to future requirements. Because one thing is clear - artificial intelligence is THE key technology of the future".

The Innovation Park for Artificial Intelligence (IPAI) in Heilbronn (www.ip.ai) sees itself as an innovation platform for applied AI and a German lighthouse project with international appeal. The center is intended to map the entire AI value chain, from the qualification of specialists to the application of ethically responsible AI. The aim is to use the AI ecosystem to bring together companies, start-ups, research institutions, scientists, and public institutions and to secure Germany's digital independence and competitiveness in a key future technology.

Source:

Hohenstein Laboratories GmbH & Co. KG

EMPEL Green Theme Technologies
06.02.2024

PFAS-free and water-free textile finishing enters Japanese market

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

Green Theme Technologies (GTT), creators of the PFAS-free and water-free EMPEL® textile finishing platform, delivers advanced performance and a long term sustainability solution to the Japanese market. Green Theme Technologies, Inc. (GTT) is a US-based textile innovation company with a global vision to increase performance and eliminate pollution.

EMPEL® is a solution for textile mills looking to provide clean, high-performance finishes, and GTT actively promotes this innovative technology to all relevant Japanese companies, including mills, manufacturers, and brands. YKK, the Japanese global leader in zipper manufacturing, has already adopted the EMPEL® technology into their manufacturing process and promotes the technology globally in their new DynaPel™ collection.

GTT’s activities in Japan are supported by the Japan External Trade Organization (JETRO), a government-related organization that works to promote mutual trade and investment between Japan and the rest of the world. GTT has been approved for JETRO’s Invest Japan Support Program, which allows GTT to leverage its resources to set up an office in Japan in the future and for J-Bridge Program to forge relationships with prospective Japanese partners.

Source:

Green Theme Technologies

adidas Terrex and National Geographic: Rainforest-Inspired Hiking Collection (c) adidas AG
02.02.2024

adidas Terrex and National Geographic: Rainforest-Inspired Hiking Collection

adidas TERREX and National Geographic collaborate once again to launch a collection that pays homage to the rainforest supporting National Geographic efforts.

Throughout the collection, images captured by National Geographic photographers are interpreted in different ways on different products, taken through different hues and applied in various ways on garments across the range:

adidas TERREX and National Geographic collaborate once again to launch a collection that pays homage to the rainforest supporting National Geographic efforts.

Throughout the collection, images captured by National Geographic photographers are interpreted in different ways on different products, taken through different hues and applied in various ways on garments across the range:

  • ADIDAS TERREX | NATIONAL GEOGRAPHIC RAIN.RDY JACKET – Crafted from waterproofing materials and construction, adidas RAIN.RDY products keep the water out. The jacket also features easily-accessible pockets, a stowaway hood and elongated sleeves with hook-and-loop.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC WINDSTOPPER JACKET - Made from GORE-TEX WINDSTOPPER, this WIND.RDY jacket is wind-resistant and water-repellent.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC WINDBREAKER - Using advanced materials, adidas WIND.RDY is designed to resist the wind and provide optimised breathability hikers can feel protected and comfortable.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC GRAPHIC LONG SLEEVE / SHORT SLEEVE TEE – The long sleeve tee combines technical materials with style beyond the mountain, including Aeroready material that wicks sweat to keep dry and comfortable.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC PANTS - Marry style and functionality by combining outdoor-informed design and street-informed style together, complemented by Durable Water Repellent (DWR) material to stay dry and comfortable.
  • ADIDAS TERREX | NATIONAL GEOGRAPHIC SKIRT - Made in adidas' wind and water-resistant WIND.RDY fabric, this skirt is for adventures on or off the trail.

The theme of this season’s drop was inspired by National Geographic’s seasonal focus on educating people around rainforest awareness and conservation.

More information:
adidas Outdoor outdoor apparel
Source:

adidas AG

DITF: Recyclable event and trade fair furniture made of paper (c) DITF
Structurally wound paper yarn element with green sensor yarn.
26.01.2024

DITF: Recyclable event and trade fair furniture made of paper

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

A lot of waste is generated in the trade fair and event industry. It makes sense to have furniture that can quickly be dismantled and stored to save space - or simply disposed of and recycled. Paper is the ideal raw material here: locally available and renewable. It also has an established recycling process. The German Institutes of Textile and Fiber Research (DITF) and their project partners have jointly developed a recycling-friendly modular system for trade fair furniture. The "PapierEvents" project was funded by the German Federal Environmental Foundation (DBU).

Once the paper has been brought into yarn form, it can be processed into a wide variety of basic elements using the structure winding process, creating a completely new design language.

The unusual look is created in the structure winding process. In this technology developed at the DITF, the yarn is deposited precisely on a rotating mandrel. This enables high process speeds and a high degree of automation. After the winding process, the individual yarns are fixed, creating a self-supporting component. A starch-based adhesive, which is also made from renewable and degradable raw materials, was used in the project for the fixation.

The recyclability of all the basic elements developed in the project was investigated and confirmed. For this purpose the research colleagues at the project partner from the Department of Paper Production and Mechanical Process Engineering at TU Darmstadt (PMV) used the CEPI method, a new standard test procedure from the Confederation of European Paper Industries.

Sensor and lighting functions were also implemented in a recycling-friendly manner. The paper sensor yarns are integrated into the components and detect contact.

Also, a modular system for trade fair and event furniture was developed. The furniture is lightweight and modular. For example, the total weight of the counter shown is well under ten kilograms and individual parts can easily be shipped in standard packages. All parts can be used several times, making them suitable for campaigns lasting several weeks.

A counter, a customer stopper in DIN A1 format and a pyramid-shaped stand were used as demonstrators. The research work of the DITF (textile technology) and PMV (paper processing) was supplemented by other partners: GarnTec GmbH developed the paper yarns used, the industrial designers from quintessence design provided important suggestions for the visual and functional design of the elements and connectors and the event agency Rödig GmbH evaluated the ideas and concepts in terms of usability in practical use.

Source:

Deutsche Institute für Textil- und Faserforschung (DITF)

Selection of looks of the What Goes Around Comes Around exhibition Photographer: Elzo Bonam
Selection of looks of the What Goes Around Comes Around exhibition
25.01.2024

Fashion for Good Museum: Final exhibition “What goes around comes around”

The Fashion for Good museum in Amsterdam marks its 6 year journey with a special fashion exhibition focused on circularity, called What Goes Around Comes Around. Honing in on how circularity plays out in different circles of influence, the exhibition showcases inspirational displays that make tangible what a circular fashion industry will look like.

What Goes Around Comes Around pays homage to the extraordinary work of pioneering artists, innovators and designers working to shift the fashion industry with new solutions. The exhibition opens January 27, 2024 and will be open to the public for 5 months. It is the grand finale, as the Museum is closing its doors. As such it will be the Museum’s final call to collective action, which the fashion industry still so highly needs.

The Fashion for Good museum in Amsterdam marks its 6 year journey with a special fashion exhibition focused on circularity, called What Goes Around Comes Around. Honing in on how circularity plays out in different circles of influence, the exhibition showcases inspirational displays that make tangible what a circular fashion industry will look like.

What Goes Around Comes Around pays homage to the extraordinary work of pioneering artists, innovators and designers working to shift the fashion industry with new solutions. The exhibition opens January 27, 2024 and will be open to the public for 5 months. It is the grand finale, as the Museum is closing its doors. As such it will be the Museum’s final call to collective action, which the fashion industry still so highly needs.

“We are highlighting three areas in What Goes Around Comes Around", explains curator Sophie Jager-van Duren at the Fashion for Good Museum. “First: new work by local artists Atelier Reservé and The Patchwork Family, design collectives working towards circularity, demonstrating what is happening right now. We are also showing looks from established designers BOTTER, Ronald van der Kemp and Marga Weimans, Yuima Nakazato and Nicole McLaughlin. Second, the community, with an installation for visitors to participate in, planting the seed that we need each other to change the fashion system. Lastly, the industry - honing in on examples of innovations and technologies. We invited designers to create new work with circular materials including Living Ink, MIRUM, Altmat and Biophilica.”

Today’s fashion industry is caught in a vicious cycle of ‘take-make-waste’ and this system has a growing negative impact on people and the planet. For instance, in Europe, the average consumer is responsible for 15 kilos of textile waste per year and these numbers are increasing. To address this, we need action from individuals, the industry and society alike to go from a linear take-make-waste model into one that is circular by design.

The Fashion for Good Museum is inviting anybody to come visit its final exhibition and learn from concrete examples, to understand the current state of the fashion industry, gain the tools for taking individual or collective action and be inspired by circular fashion available today.

Designing for circularity means designing without creating waste or pollution, as all materials are continually reused instead of discarded. A circular system is restorative and regenerative and reduces pressure on natural resources. The ultimate goal of the exhibition is to put circularity into practice, help people envision a circular economy based on community practices and empower visitors to take collective action, starting in the museum but extending to their homes and daily lives.

Through the exhibition and its public programme, which consists of interactive workshops and educational events, the museum functions as a community space where visitors are invited to learn, gain new perspectives and are exposed to inspiring examples, building the skills and knowledge to create positive change. The upcoming few months there are multiple events, educational toolkits and other opportunities to join us, all open for the public, keep an eye out on our website and social media channels for the latest updates.

The exhibition is open for the public from Saturday 27th of January until June 5th 2024, marking World Environment Day on June 5th as the final closing day of the museum.

Source:

Fashion for Good 

24.01.2024

Rieter: First information on the financial year 2023

  • Sales of CHF 1 418.6 million in the financial year 2023
  • Order intake of CHF 541.8 million in the financial year 2023; order backlog of around CHF 650 million as of December 31, 2023
  • EBIT margin of around 7% expected for the full year 2023 at the upper end of the guidance
  • Market remains challenging

The Rieter Group closed the financial year 2023 with slightly lower sales than in the previous year. According to the first, unaudited figures, total sales of CHF 1 418.6 million were achieved, which is around 6% down on the previous year (2022: CHF 1 510.9 million). In line with expectations, the order intake of CHF 541.8 million was considerably below the previous year (2022: CHF 1 157.3 million). Rieter expects a positive EBIT margin of around 7% for the full year 2023 (2022: 2.1%).

  • Sales of CHF 1 418.6 million in the financial year 2023
  • Order intake of CHF 541.8 million in the financial year 2023; order backlog of around CHF 650 million as of December 31, 2023
  • EBIT margin of around 7% expected for the full year 2023 at the upper end of the guidance
  • Market remains challenging

The Rieter Group closed the financial year 2023 with slightly lower sales than in the previous year. According to the first, unaudited figures, total sales of CHF 1 418.6 million were achieved, which is around 6% down on the previous year (2022: CHF 1 510.9 million). In line with expectations, the order intake of CHF 541.8 million was considerably below the previous year (2022: CHF 1 157.3 million). Rieter expects a positive EBIT margin of around 7% for the full year 2023 (2022: 2.1%).

Outlook
Rieter is operating in a challenging market environment due to the economic and geopolitical conditions as well as the continuing weak demand. There are initial signs of a market recovery visible for the financial year 2024. Rieter will present an outlook for the financial year 2024 at the annual results press conference on March 13, 2024.

Source:

Rieter Holding AG

Disney unveils virtual ‘HoloTile’ floor technology (c) Disney, The Walt Disney Company
Lanny Smoot, Disney Imagineer and Creator of HoloTile floor
22.01.2024

Disney unveils virtual ‘HoloTile’ floor technology

Disney unveiled the HoloTile floor, created by Disney Research Fellow and longtime member of Walt Disney Imagineering Research & Development Lanny Smoot.

The HoloTile floor is a multi-person, omni-directional, modular, expandable, treadmill floor. It allows any number of people to have a shared virtual reality (VR) experience, walk an unlimited distance in any direction, and never collide or walk off its surface.

The HoloTile floor can also be an insert in a theatrical stage, allowing performers to move and dance in new ways, or stage props and structures to move around or appear to set themselves up.

The new technology was revealed (see here), as Lanny Smoot is being inducted into the National Inventors Hall of Fame. He is the first Disney Imagineer to receive this recognition.

Disney unveiled the HoloTile floor, created by Disney Research Fellow and longtime member of Walt Disney Imagineering Research & Development Lanny Smoot.

The HoloTile floor is a multi-person, omni-directional, modular, expandable, treadmill floor. It allows any number of people to have a shared virtual reality (VR) experience, walk an unlimited distance in any direction, and never collide or walk off its surface.

The HoloTile floor can also be an insert in a theatrical stage, allowing performers to move and dance in new ways, or stage props and structures to move around or appear to set themselves up.

The new technology was revealed (see here), as Lanny Smoot is being inducted into the National Inventors Hall of Fame. He is the first Disney Imagineer to receive this recognition.

Smoot is also credited with giving Madame Leota her ability to “float” in the Séance Room at the Haunted Mansion at Disneyland Park; crafting the state-of-the-art extendable lightsaber used by Disney Live Entertainment; inventing the Magic Playfloor interactive game experience on the Disney Cruise Line; producing the immersive Fortress Explorations adventure at Tokyo DisneySea; and designing the virtual and interactive koi ponds at the Crystal Lotus Restaurant at Hong Kong Disneyland Hotel.

More information:
Disney floor space Virtual Reality
Source:

Disney, The Walt Disney Company

(c) A. Monforts Textilmaschinen GmbH & Co. KG
05.01.2024

Monforts: New Stenter line installed at Curt Bauer

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

Monforts' new Montex 8500 stenter line was recently installed at Curt Bauer’s plant in Aue in Germany.

Curt Bauer has been in continuous operation for 150 years, beginning as a weaving mill in Aue in the Ore Mountains region of Saxony back in 1882. Today, with 120 employees, the company has an annual production of 2.2 million metres of fabric and specialises in three key fields – home textiles, special damask fabrics for West African garments and technical textiles.

A first Montex stenter was installed by Monforts at the Aue plant in 2003 and an older machine from a third party supplier was also still in operation prior to the latest upgrade.
“The replacement of our older existing stenter, which was installed in 1985, was long overdue,” explains Gert Bauer. “It had a maximum working width of 2.2 metres and we were looking to both increase productivity and reduce energy requirements.”

As a consequence, the company opted for a new Montex 8500 line with a working width of 3.2 metres equipped with the MonforClean heat recovery and exhaust air purification system. The Montex stenter remains unmatched in terms of its robustness and long service life and with MonforClean technology, the waste heat from the drying process is used to pre-heat the drying air. This results in a radical reduction in the conventional heat supply required, compared to full gas and thermal oil heating. Overall energy savings of up to 40% can now be achieved compared to conventional stenters.

The first challenge at the Aue plant was how to fit the significantly larger machine into the available space without restricting the area required for docking operations.

The special multi-level configuration that Monforts designers and Curt Bauer’s team devised in order to meet these requirements involved raising all of the line’s drying zones – with a combined length of over 28 metres – on scaffolding platforms, to enable the ground floor space below them to continue to be fully utilised.

The next challenge involved configuring the MonforClean system without having to make any costly changes to the roofing structure. This, Gert Bauer observes, demanded “millimetre precision”.

With the new line now fully operational, the savings it is providing have yet to be fully calculated.

Source:

A. Monforts Textilmaschinen GmbH & Co. KG

Fashion for Good released "Sorting for Circularity India toolkit" (c) Fashion for Good
18.12.2023

Fashion for Good released "Sorting for Circularity India toolkit"

Leveraging insights from Wealth in Waste, Fashion for Good released a toolkit designed to revalorise textile waste in India.

"The Sorting for Circularity India toolkit is a milestone in our journey towards a waste-free world. We have mapped the textile waste landscape, unpacking the huge potential, as well as the roadblocks and commercial opportunities in India’s textile waste industry. We are excited to move beyond rhetoric with this powerful coalition of partners and translate our findings into a roadmap for concrete actions", said Katrin Ley, Managing Director, Fashion for Good.

In 2021, Fashion for Good launched the Sorting for Circularity India Project to organise the Indian textile waste market in a three-phase approach so as to streamline, strengthen and foster the Indian textile waste market to drive the transition to a more circular economy that recaptures value to its maximum potential.

Leveraging insights from Wealth in Waste, Fashion for Good released a toolkit designed to revalorise textile waste in India.

"The Sorting for Circularity India toolkit is a milestone in our journey towards a waste-free world. We have mapped the textile waste landscape, unpacking the huge potential, as well as the roadblocks and commercial opportunities in India’s textile waste industry. We are excited to move beyond rhetoric with this powerful coalition of partners and translate our findings into a roadmap for concrete actions", said Katrin Ley, Managing Director, Fashion for Good.

In 2021, Fashion for Good launched the Sorting for Circularity India Project to organise the Indian textile waste market in a three-phase approach so as to streamline, strengthen and foster the Indian textile waste market to drive the transition to a more circular economy that recaptures value to its maximum potential.

The project brought together various industry players including Fashion for Good partners adidas, Levi Strauss & Co., PVH Corp., Target, Arvind Limited, Birla Cellulose, and Welspun India, as well as Fashion for Good innovators Reverse Resources, PICVISA, and Matoha; H&M, Primark, and TESCO also joined as external partners. The project is supported through catalytic funding provided by Laudes Foundation and IDH, and knowledge support from Canopy and Circle Economy Foundation.

Drawing upon the invaluable insights gained throughout the project, Fashion for Good unveils a toolkit designed to harness the untapped potential of textile waste in India. Together, these resources provide valuable insights, assessments, and practical guidance to advance recycling in India's textile industry.

Source:

Fashion for Good