From the Sector

Reset
32 results
Hexcel’s HexPly® M9 Prepreg receives Type Approval Certification (c) Bernard Biger
25.01.2021

Hexcel’s HexPly® M9 Prepreg receives Type Approval Certification

Hexcel is pleased to announce Type Approval Certification of its HexPly® M9 prepreg materials by DNV GL. The addition of the HexPly M9 prepreg range to Hexcel’s already comprehensive DNV GL certified portfolio provides ship and boat builders with optimal prepreg processing options.

HexPly M9 prepregs enable short cure cycles at 100˚C and above and provide a balance between ease of processing and mechanical performance. Available in high tack and medium tack variants, HexPly M9 prepregs are available with a wide range of unidirectional, woven, and multiaxial reinforcements. Partnered with Hexcel’s own HexTow® IMC2 and HexTow® HM54 / HM63 fibers, designers and engineers can optimize highly loaded composite structures such as masts, wing sails, and foils with increased glass transition temperatures (Tg) and excellent long-term fatigue performance.
 
Hexcel has completed the DNV GL certification for HexPly M9 in response to the rapidly increasing demand for type-approved high-performance prepreg materials for large composite structures in the commercial marine craft.  

Hexcel is pleased to announce Type Approval Certification of its HexPly® M9 prepreg materials by DNV GL. The addition of the HexPly M9 prepreg range to Hexcel’s already comprehensive DNV GL certified portfolio provides ship and boat builders with optimal prepreg processing options.

HexPly M9 prepregs enable short cure cycles at 100˚C and above and provide a balance between ease of processing and mechanical performance. Available in high tack and medium tack variants, HexPly M9 prepregs are available with a wide range of unidirectional, woven, and multiaxial reinforcements. Partnered with Hexcel’s own HexTow® IMC2 and HexTow® HM54 / HM63 fibers, designers and engineers can optimize highly loaded composite structures such as masts, wing sails, and foils with increased glass transition temperatures (Tg) and excellent long-term fatigue performance.
 
Hexcel has completed the DNV GL certification for HexPly M9 in response to the rapidly increasing demand for type-approved high-performance prepreg materials for large composite structures in the commercial marine craft.  

Hexcel’s collaboration with Chantiers de l’Atlantique on its new Silenseas cruise ship concept – a concept that uses composite Solid Sail® propulsion as well as dual-fuel engines to reduce emissions and operating costs – is one such application. In this case, DNV GL type approval provides third-party assurance of the product’s quality, performance and consistency, and also helps to streamline the approval of composite parts that replace traditionally metallic structures.

Hexcel has supplied advanced composite materials to the marine industry for more than 40 years and manufactures a comprehensive range of DNV GL certified products including woven reinforcements, multiaxial fabrics, prepregs, and adhesive films. Hexcel is committed to developing new composite technologies for the marine sector, helping builders evolve their designs to produce lighter, more fuel-efficient, and a sustainable craft for the future.

“Our latest Type Approval Certification is an important part of our strategy to provide the most complete package of DNV GL certified composite materials for the marine sector,” said Andreas Sageder, Product Manager at Hexcel. “With the addition of our M9 prepreg resin systems, mast, ship, and boat builders have an expanded range of processing and cure options available for parts requiring higher Tg and improved fatigue performance.”

 

20.10.2020

New Partners: FERRO-PLAST and SANITIZED AG

  • New strategic sales partnership for the Sanitized® antimicrobial polymer additives in Italy

Italy and Switzerland - SANITIZED customers in the polymer industry in Italy will profit from FERRO-PLAST’s expertise and established sales network. The Sanitized® antimicrobial additives for hygiene function and material protection for polymers will be marketed in Italy by our new sales partner.

SANITIZED and FERRO-PLAST, two experts in their fields with similar understanding of values, have joined forces; both deal in high-performance products for the Polymer industry combined with the best possible service, which begins with the conception of value-added products and their optimum use. This collaboration with SANITIZED is a good fit for the portfolio as both companies focus on innovative, customer-specific solutions.

  • New strategic sales partnership for the Sanitized® antimicrobial polymer additives in Italy

Italy and Switzerland - SANITIZED customers in the polymer industry in Italy will profit from FERRO-PLAST’s expertise and established sales network. The Sanitized® antimicrobial additives for hygiene function and material protection for polymers will be marketed in Italy by our new sales partner.

SANITIZED and FERRO-PLAST, two experts in their fields with similar understanding of values, have joined forces; both deal in high-performance products for the Polymer industry combined with the best possible service, which begins with the conception of value-added products and their optimum use. This collaboration with SANITIZED is a good fit for the portfolio as both companies focus on innovative, customer-specific solutions.

With the addition of the antimicrobial Sanitized® additives at FERRO-PLAST, the Polymer industry gets an overall package, offering more than just products for hygiene function and material protection. As an addition to the core product services, SANITIZED supports development and production, regulatory queries and marketing through the use of the Sanitized® Ingredient Brand, which characterizes the end products within their differentiation and emphasis on quality.

The antimicrobial additives for Polymers from SANITIZED protect end products from bacterial infestation, growth of algae and mildew, material degradation, biofilms, pink stain, and odors caused by microbes. The Polymer industry uses the antimicrobial additive in flooring, industrial coatings, artificial leather, roof membranes, pool liners, tarpaulins, and all extruded products.

“FERRO-PLAST is proud to represent the prestigious and important brand Sanitized® in Italy. We are confident to have the necessary experience and skills to successfully promote these products which are leaders in the hygiene field. We are sure that especially in this particular moment, they bring a substantial support to the Italian plastic market”, says FERRO-PLAST’s Managing Director, Rodolfo Di Nardo. “The technical competence and the strong customer focus impress me about FERRO-PLAST”, confirms Michael Lüthi, Head of BU Polymer at SANITIZED AG.

Source:

EMG

World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy (c) pixabay
Cotton
07.10.2020

October, 7th: World Cotton Day

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

  • World Cotton Day on 7 October Highlights the Importance of Cotton for Development Policy

Bremen - Stemming from a 2019 initiative of the African Cotton-4 countries Benin, Burkina Faso, Chad and Mali, World Cotton Day will take place this year on 7 October. The event is organised by the Geneva-based World Trade Organisation (WTO) and is supported by the Food and Agriculture Organisation of the United Nations (FAO), the United Nations Conference on Trade and Development (UNCTAD), the International Trade Centre (ITC) and the International Cotton Secretariat (ICAC). The Bremen Cotton Exchange is also involved.

“Cotton is often underestimated because it is so natural. Behind it are millions of people, for example many farmers, field workers, employees in ginning factories, logistics providers and traders. We want to honour their achievements,” said the President of the Bremen Cotton Exchange, Stephanie Silber.

According to the WTO, the aim of World Cotton Day is to highlight the global economic importance of cotton and to raise awareness of the raw material by recognising the work of everyone involved in its cultivation, processing and trade. At the same time, within the framework of international cooperation, it is hoped that supporters and investors can be found to aid with technological and economic progress within the cotton value chain.

This time, the entire world cotton community will be involved in World Cotton Day on Wednesday, 7 October 2020. A wide variety of campaigns and events are taking place everywhere to draw attention to the importance of cotton and its possible uses.

Cotton is one of the most relevant agricultural raw materials in the world. Around 26 million tonnes of it are harvested annually. Approximately 150 million people in almost 80 countries around the world live from the cultivation of the natural fibre. A large number of these live in developing countries, where cotton cultivation is of particular importance as a cash crop.

Cotton is known as an agricultural product that is turned into a textile. The raw material is indispensable in fashion and clothing – and has been for thousands of years. But the use of cotton now goes far beyond textiles. For example, cosmetic products such as hand creams and hair shampoo are made from the oil of cotton seeds. The raw material is also used in the manufacture of banknotes, furniture and technical textiles, as well as in medical technology.

Against the background of the current discussion on sustainability and sustainable consumption, the role of natural fibres is becoming even more important. Cotton is biodegradable and a renewable resource. It can be grown again and again in agriculture through cultivation in crop rotation. This secures incomes and enables efficient value creation within the global production and processing chain.

The Bremen Cotton Exchange will actively support World Cotton Day with cross-media coverage. In addition, in time for World Cotton Day, three thematically different, emotionally appealing short films about cotton will be launched. They are aimed at consumers as customers of the textile and clothing trade and provide information about the benefits and properties of cotton and answer questions about its sustainability. In keeping with the times, they will be published via virtual media.

CHEMLOGIS and SANITIZED AG: New strategic sales partnership for the Sanitized® antimicrobial polymer additives in Mexico (c) SANITIZED AG
CHEMLOGIS’s CEO Ing. León Freiman K.
30.07.2020

CHEMLOGIS and SANITIZED AG: New strategic sales partnership for the Sanitized® antimicrobial polymer additives in Mexico

Mexico and Switzerland - SANITIZED customers in the polymer industry in Mexico will profit from CHEMLOGIS’s expertise and established sales network. The Sanitized® antimicrobial additives for hygiene function and material protection for polymers will be marketed in Mexico by our new sales partner.

SANITIZED and CHEMLOGIS, two experts in their fields with similar understanding of values, have joined forces; both deal in high-performance products for the Polymer industry combined with the best possible service, which begins with the conception of value-added products and their optimum use. This collaboration with SANITIZED is a good fit for the portfolio as both companies focus on innovative, customer-specific solutions.

Mexico and Switzerland - SANITIZED customers in the polymer industry in Mexico will profit from CHEMLOGIS’s expertise and established sales network. The Sanitized® antimicrobial additives for hygiene function and material protection for polymers will be marketed in Mexico by our new sales partner.

SANITIZED and CHEMLOGIS, two experts in their fields with similar understanding of values, have joined forces; both deal in high-performance products for the Polymer industry combined with the best possible service, which begins with the conception of value-added products and their optimum use. This collaboration with SANITIZED is a good fit for the portfolio as both companies focus on innovative, customer-specific solutions.

With the addition of the antimicrobial Sanitized® additives at CHEMLOGIS, the Polymer industry gets a new overall package, offering more than just products for hygiene function and material protection. As an addition to the core product services, SANITIZED supports development and production, regulatory queries and marketing through the use of the Sanitized® Ingredient Brand, which characterizes the end products within their differentiation and emphasis on quality.

The antimicrobial additives for Polymers from SANITIZED protect end products from bacterial infestation, growth of algae and mildew, material degradation, biofilms, pink stain, and odors caused by microbes. The Polymer industry uses the antimicrobial additive in flooring, industrial coatings, artificial leather, roof membranes, pool liners, tarpaulins, and all extruded products.

“Everyone at CHEMLOGIS is very excited to partner with SANITIZED for the sale of their antimicrobial products to the Polymer processors in Mexico. Together we bring a highly focused approach to customer´s needs in terms of technology service and products” says CHEMLOGIS’s CEO Ing. León Freiman K.” “The technical competence and the strong customer focus impress me about CHEMLOGIS”, says Michael Lüthi, Head of BU Polymer at SANITIZED AG.

Source:

EMG

(c) Hexcel
04.03.2019

Hexcel at JEC World 2019

  • Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

  • Hexcel’s Composite Innovations For Aerospace, Automotive, Energy And Marine Applications At JEC World 2019 Hall 5 - Stand J41

STAMFORD, Conn. – At this year’s JEC World taking place in Paris on March 12-14, Hexcel will promote a wide range of composite innovations for customer applications in aerospace, automotive, energy and marine markets.

Aerospace Innovations

Hexcel’s HiTape® and HiMax™ dry carbon reinforcements were developed to complement a new generation of HiFlow™ resin systems, producing high quality aerospace structures using the resin infusion process. HiTape® was developed for the automated lay-up of preforms and HiMax™ is a range of optimized non-crimp fabrics (NCF). Both products incorporate a toughening veil to enhance mechanical properties, meeting the structural requirements for aerospace parts.

Visitors to JEC will see an Integrated Wing Panel demonstrator and an I-beam, both made with HiTape® reinforcements, and an Opticoms rib made with HiMax™ NCF. The Opticoms rib and I Beam were both manufactured using C-RTM (Compression Resin Transfer Molding). They were injected with Hexcel’s RTM6 resin in a process taking less than 5 minutes. The total manufacturing cycle for both parts was just 4.5 hours.

Also among the Aerospace exhibits, Hexcel will display a composite petal for a satellite antenna, manufactured by Thales Alenia Space Italia. The petal is part of a set of 24 deployable structural elements that form the large area reflector assembly used on board Low Earth Orbit (LEO) observation satellites. Thales Alenia Space Italia selected Hexcel’s HexPly® M18 prepreg for this application, acknowledging the superior mechanical and outgassing properties provided.

Another Hexcel prepreg application on show is a “zero” frame, manufactured by Aerofonctions for the engine area of Daher’s TBM 910/930 single-engine turboprop aircraft. Hexcel’s HexPly® M56 prepreg was selected by Daher for the “zero” frame – a product developed for Out of Autoclave applications that provides the same high quality and performance as autoclave-cured prepregs, from a simple vacuum bag cure in an oven.

With 50 years of experience behind its comprehensive range of high-strength, high-strain PAN-based carbon fibers, Hexcel continues to innovate, and is introducing two new fibers to its portfolio. HexTow® HM50 combines high modulus and high tensile strength, making it ideal for commercial and defense aircraft and engines. HexTow® 85 was developed specifically to replace rayon-based carbon fiber for ablative applications.

HexTow® carbon fiber holds the most qualified carbon fiber positions on aerospace programs in the industry and is the best unsized fiber available on the market. It provides excellent bonding interfacial properties with thermoplastic matrices and is the best-performing fiber for 3D printing applications.

Additive manufacturing is another area of expertise for Hexcel, using PEKK ultra-high performance polymers and HexAM™ technology to manufacture carbon-reinforced 3D printed parts. This
innovative process provides a weight-saving solution for intricate parts in highly demanding aerospace, satellite and defense applications. HexPEKK™ structures offer significant weight, cost and time-to-market reductions, replacing traditional cast or machined metallic parts with a new technology.

Hexcel is well known for its range of weight-saving, stiffness-enhancing honeycombs and the company adds value by providing a range of engineered core solutions to customers from facilities in the USA, Belgium and the newly opened Casablanca plant in Morocco. Hexcel’s engineered core capabilities enable highly contoured parts with precision profiling to be produced to exacting customer specifications. An example of such a part will be on display at JEC. Made from Aluminum FlexCore®, the part is CNC machined on both sides, and formed and stabilized with both peel ply and flyaway layers of stabilization. Aircraft engines benefit from a number of Hexcel core technologies including HexShield™ honeycomb that provides high temperature resistance in aircraft engine nacelles. By inserting a thermally resistant material into honeycomb cells, Hexcel provides a core product with unique heat-shielding capabilities that allows for the potential re-use of material after a fire event.

Hexcel’s Acousti-Cap® broadband noise-reducing honeycomb significantly improves acoustic absorption in aircraft engine nacelles. The acoustic treatment may be positioned at a consistent depth and resistance within the core, or can be placed in a pattern of varying depths and/or resistances (Multi-Degrees of Freedom and 3 Degrees Of Freedom), offering an acoustic liner that is precisely tuned to the engine operating conditions. These technologies have been tested at NASA on a full engine test rig and meet all 16 design conditions without trade-offs.

HexBond™ – the new name in Adhesives

Hexcel’s range of high performance adhesives has expanded considerably following the company’s acquisition of Structil. The company has now decided to unite the range by marketing all of its adhesive products using HexBond™ branding. The comprehensive range of HexBond™ structural film adhesives, foaming adhesive films, paste adhesives, liquid shims, epoxy fillets and Chromium free liquid primers is suitable for a wide range of applications in combination with Hexcel’s prepreg and honeycomb products.

Automotive Innovations

Hexcel’s carbon prepreg patch technology provides an innovative way of locally stiffening and reinforcing metal parts, providing noise and vibration management functionality. HexPly® prepreg patches consist of unidirectional carbon fiber impregnated with a fast curing epoxy matrix that has self-adhesive properties, enabling it to bond to metal in a highly efficient one-step process. These key technology properties are demonstrated in an 18.5kg aluminum subframe (that is 50% lighter than steel equivalents), which was reinforced with 500 grams of HexPly® prepreg and tested by Saint Jean Industries. The part demonstrates a significant reduction in noise, vibration and harshness (NVH). Other benefits include lower production costs, energy savings, increased driver comfort, production flexibility and part count reduction. With this technology Hexcel is a finalist in the JEC Innovation Awards 2019 in the Automotive Applications category.

HexPly® prepreg patch technology was also applied to a hybrid side sill demonstrator developed with Volkswagen and Dresden University to address future crash test requirements, specifically for electric cars. Combining fiber-reinforced plastic (FRP) with metal, the hybrid construction allows for optimum performance including weight savings, enhanced safety, increased energy absorption, battery protection in a crash situation and production flexibility.

Hexcel will also display a lightweight CFRP transmission crossmember produced from Hexcel’s high performance HexMC®-i 2000 molding compound. The transmission crossmember was developed in partnership with the Institute of Polymer Product Engineering (at Linz University), Engel and Alpex. As the part connects the chassis together and supports transmission it has to be stiff and strong, resisting fatigue and corrosion. Hexcel’s HexMC®-i 2000 was selected as the best-performing molding compound on the market, curing in as little as two minutes to produce lightweight, strong and stiff parts.
To produce the transmission crossmember HexMC®-i 2000 preforms are laid up in Alpex molds and compression-molded in a v-duo press that was tailored for the application by Engel. Ribs, aluminum inserts and other functions can be molded into the part using the single-stage process, reducing component-count. Any offcuts from the preforms can be interleaved between the plies of material to provide additional reinforcement in key areas - meaning that the process generates no waste.

Other Automotive promotions on Hexcel’s stand at JEC World include a composite leaf spring manufactured by ZF using HexPly® M901 prepreg. In contrast to steel leaf springs, composite versions offer many advantages including weight savings of up to 70%, high corrosion resistance, optimized system integration and superior performance. HexPly® M901 prepreg reduces the cure cycle to below 15 minutes and provides 15% higher mechanical performance, with enhanced fatigue properties. It also operates at high temperatures, providing a Tg of up to 200°C following a post cure.

Marine Innovations

Hexcel has a comprehensive range of products aimed at racing yacht and luxury boat builders that include America’s Cup, IMOCA class and DNV GL-approved prepregs, woven reinforcements and multiaxial fabrics for hull and deck structures, masts and appendages.

At JEC World Hexcel will display an IMOCA yacht mast manufactured by Lorima using HexPly® high modulus and high strength carbon fiber prepreg from Hexcel Vert-Le-Petit. Lorima is the exclusive official supplier of masts for IMOCA 60 class racing boats.

Hexcel’s HexTow® IM8 carbon fiber has been selected as the highest performing industrial carbon fiber on the market and will be used by spar and rigging manufacturer Future Fibres to manufacture their AEROrazr solid carbon rigging for all the teams in the 36th America’s Cup.

Hexcel’s HiMax™ DPA (Dot Pattern Adhesive) reinforcements are non-crimp fabrics supplied pre-tacked, allowing multiple fabrics to be laid-up more easily in preparation for resin infusion. Providing an optimal, consistent level of adhesion, they allow a faster and more consistent resin flow, as well as eliminating the use of spray adhesive for a healthier working environment and lower risk of contamination. Simply unrolled and applied to the mold or core layer before the introduction of resin, HiMax™ DPA fabrics are widely used in boat building, where lay-up times can be reduced by up to 50%.

Wind Energy Innovations

Hexcel has developed a range of HexPly® surface finishing prepregs and semi-pregs for wind turbine blades and marine applications. Providing a tough, durable and ready-to-paint surface without using in-mold coats, these products shorten the manufacturing cycle and reduce material costs. HexPly® XF2(P) prepreg is optimized for wind blades and has a ready-to-paint surface, straight from the mold, saving at least 2 hours of takt time.

Polyspeed® pultruded carbon laminates were developed for load-carrying elements in a blade structure and are manufactured with a polyurethane matrix that provides outstanding mechanical performance in terms of stiffness and durability. The blade manufacturing process is optimized, with increased throughput. The pultruded laminates are supplied in coils as continuous cross section profiles.
HiMax™ non-crimp fabrics using E-glass, high modulus glass and carbon fibers are also available in a wide range of unidirectional, biaxial and triaxial constructions. HiMax™ fabrics have applications throughout the turbine, from the stitched carbon fiber UDs used in the main structural elements, to glass fabrics and hybrids for blade shells and nacelles. There are also specialist applications such as lightweight fabrics for heated leading edge de-icing zones.

Source:

AGENCE APOCOPE

(c) CHOMARAT
30.01.2019

CHOMARAT INVESTS IN ITS COATINGS & FILMS BUSINESS: NEW EXTRUDER, NEW GRAINING LINE

Chomarat, a leader in technical textiles and composite reinforcements, is developing its Coatings & Films business at its French sites. The Group has just acquired an extruder and a graining line to increase its production capacities and develop new, more efficient solutions, particularly in the field of TPO (polyolefin thermoplastics). These two technological investments are part of the €35 million investment plan announced by the Group in mid-2017.

AN EXPANDED OFFER WITH THE NEW GRAINING LINE
The graining line gives texture to the coated textile and provides a differentiation of appearance or a functionalization, such as non-slip or durability. "We will use this new technology to broaden the scope of material we process (including the production of TPO sheets with or without backing), and to improve the perceived quality by a better grain definition," explains Philippe Chomarat, Director of the Coatings & Films business at Chomarat. This technological investment enables the Group to increase its production capacities and offer new solutions for the automotive and luxury bag markets.

Chomarat, a leader in technical textiles and composite reinforcements, is developing its Coatings & Films business at its French sites. The Group has just acquired an extruder and a graining line to increase its production capacities and develop new, more efficient solutions, particularly in the field of TPO (polyolefin thermoplastics). These two technological investments are part of the €35 million investment plan announced by the Group in mid-2017.

AN EXPANDED OFFER WITH THE NEW GRAINING LINE
The graining line gives texture to the coated textile and provides a differentiation of appearance or a functionalization, such as non-slip or durability. "We will use this new technology to broaden the scope of material we process (including the production of TPO sheets with or without backing), and to improve the perceived quality by a better grain definition," explains Philippe Chomarat, Director of the Coatings & Films business at Chomarat. This technological investment enables the Group to increase its production capacities and offer new solutions for the automotive and luxury bag markets.

INCREASING PERFORMANCE WITH THE NEW EXTRUDER
The new extruder increases the Chomarat production capacity for coated textiles and allows production in larger widths. The technology consumes less energy and emits very low level of VOCs, in line with the Group's sustainable approach. It also supplements existing solutions for developing biosourced coated fabrics. "This is a strategic investment for Chomarat, as in addition to PVC, we will be able to work with new materials such as TPO, TPU and new biosourced materials. We will offer innovative solutions for all our markets—pipes, luxury bag, automotive and protection," concludes Philippe Chomarat.

More information:
CHOMARAT
Source:

AGENCE APOCOPE

Belgium, Czech Republic, Germany and Taiwan Pavilions to join Cinte Techtextil China (c) Messe Frankfurt (HK) Ltd
15.08.2018

Belgium, Czech Republic, Germany and Taiwan Pavilions to join Cinte Techtextil China

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

From 4 – 6 September, leading innovations and technologies from around the world will feature in the Shanghai New International Expo Centre for Cinte Techtextil China 2018. With a growing technical textile market in China and Asia, big industry names will come to showcase new products. The Belgium, Germany and Taiwan Pavilions are predicted to draw a crowd with their return, while the Czech Republic Pavilion makes its debut appearance.

Fresh innovation from the Taiwan Pavilion
The Taiwan Pavilion lives up to its reputation as one of the leading sources of industry innovation. Ten exhibitors in the Taiwan Pavilion will showcase a variety of innovations ideal for a number of industries. With advances in medical and hygiene product technologies, exhibitors Web-Pro Corporation will offer protective cover-all materials that resist pathogens and micro-organisms and multi-layered PE films for hygiene products, while Kae Hwa Industrial will introduce their developments in materials that protect against viruses. Four Elements Energy Biotechnology will showcase their multi-functional Masterbatch product, a unique FDA-qualified, anti-mildew and transparent plastic additive that repels bacteria.

Other exhibitors to watch out for in the Taiwan Pavilion include Ritex Machinery, who will display their Air Through machinery which can be applied to nonwoven fabrics for hygienic, medical and filtration uses. Everlight Chemical Industrial’s Evereco® adhesives introduce an eco-friendly solution with heat-resistance and other resilient properties. Also offering eco-friendly alternatives is TomLong Techstile and their TPU coated fabrics, ideal for waterproof and inflatable products.

Productivity and efficiency at the German Pavilion
Following high demand in the Chinese market, the German Pavilion returns with around 30 exhibitors, showcasing their expertise in efficiency in textile production. Highlights include Baumüller Nürnberg’s modular concepts and intelligent automations which allow flexible reactions to changeable market requirements. Edelmann Technology brings new high speed winder systems for increased production rates and new concepts for reducing contamination in products. ISRA Surface Vision will present 100% inline optical surface inspection methods for quality control and process optimisations. Another product to watch out for is Kufner’s xShield®, a lightweight, soft textile with 99% shielding efficiency against electromagnetic radiation.

Other big names in the German Pavilion include Autefa Solutions, Brückner Textile Technologies, Dornier Lindauer, IBENA, J.H. Ziegler, Kufner, Perlon and more.

Belgium Pavilion returns along with a Czech Republic debut
Organised by Fedustria (Belgian Textile, Woodworking and Furniture Industry Federation), the Belgium Pavilion will include textile recycling company Belrey Fibres, engineered fabrics by Pennel & Flipo for marine and rescue industries, as well as leading coating specialists Vetex who will feature a variety of functional tapes, and R&D institute Centexbel who carry out research projects across the entire textile and polymer production chain.

The new Czech Republic Pavilion organised by ATOK, the Association of Textile-Clothing–Leather Industry, will showcase three exhibitors who will provide solutions for technical yarn, fabric processing and nonwoven fabrics. These include: GF Machinery, showcasing R&D and production of special machines and lines for glass / basalt yarn and fabric processing; Retex’s nonwoven needle-punched and air laid textiles; and STAP, Europe’s biggest manufacturer of narrow fabrics.

The Cinte Techtextil China fair is recognised by European manufacturers as a gateway to the Asian market. With investment from China boosting the technical textile industry, and more Asian countries than ever developing their technical markets, Cinte Techtextil China 2018 is set to be a hub of business potential.

 

 

More information:
Cinte Techtextil China
Source:

Messe Frankfurt (HK) Ltd

© Techtextil, Messe Frankfurt Exhibition GmbH
06.08.2018

Strong potential in Buildtech and Mobiltech sectors to be displayed at Cinte Techtextil China

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

This September’s Cinte Techtextil China will once again provide a strong barometer of the state of the global technical textiles industry, and in particular which sectors in Asia as a whole, and China specifically, are performing well. Two of these for certain are Buildtech and Mobiltech, with a number of leading global and Chinese brands exhibiting to eager buyers from these sectors.

Cinte Techtextil China is Asia’s leading biennial fair for the technical textiles and nonwovens sector, and will feature an expected 500-plus total exhibitors from around 20 countries & regions from 4 – 6 September. The fair offers products and technologies for 12 application areas* which cover the entire industry.

Buildtech benefits from Belt & Road and other infrastructure investment

With a huge boom in national and regional infrastructure projects, the market for Buildtech products, especially geotextiles and construction textiles, is rapidly expanding. In particular, the government’s global Belt & Road project, as well as continued investment at home in highways, high-speed rail and more, is fuelling this expansion. According to CNITA, in 2017 China started 35 new railway projects, with additional private capital investment in this sector totalling some USD 53 billion that year. The same investment in highway construction increased 17.7%, while water conservation project investment by private firms reached a new record of USD 105 billion.

With this potential in the Asian market, it’s no surprise a number of new exhibitors will feature in the Buildtech sector at the fair, including FPC Technical Textile from Saudi Arabia, Kobe-cz from the Czech Republic, as well as Lenzing Plastics, while Johns Manville are one of the returning exhibitors this year.

  • FPC Technical Textile (Saudi Arabia) produce high-end specialty fabrics including PVC coated fabrics and fibre glass PTFE fabrics, and will focus on the latter at the fair.
  • Kobe-cz (Czech Republic) will showcase their nonwoven fabrics, mainly from glass fibre with temperature resistance up to 800°C.
  • Exhibiting for the first time at the fair with their Plastics division, Lenzing (Austria) will feature their technical laminates for building industries, roofing membranes, vapour barriers, isolation facings and barrier packaging, as well as PROFILEN® PTFE yarns, films and fibres at Cinte Techtextil.
  • Johns Manville’s (US) products on offer include polyester spunbond, PP & PBT meltblown, glass fibre nonwovens, micro glass fibre nonwovens, hybrid nonwovens, glass fibre needle mat and glass microfibers.

Mobiltech benefits from huge increases in automobile production in China

With new textile innovations and application possibilities spreading throughout the automobile industry, coupled with the fact China is the world’s largest auto producer, Cinte Techtextil is the place to see the latest products and technologies for this sector this September. Automobile production in China reached 29 million units in 2017, an increase of 3% year-on-year. Staggeringly, new-energy vehicle production grew by 53% last year, while SUVs and commercial vehicles increased 13.81% and 13.95% respectively.

With such strong growth in China, a number of leading international Mobiltech producers, as well as top domestic suppliers, will be at Cinte Techtextil this year, including:

  • Abifor (Switzerland): their focus at the fair is on products designed for automotive, construction and other technical applications, in particular their specialty hot-melt powders. The company has its own production unit in Shanghai, and reports that an increasing number of domestic customers are starting to focus on more sophisticated products.
  • SKS Group (Sweden): will showcase high performance single end yarn for automotive and industrial hoses, and single end cord for automotive and industrial belts.
  • Swisstulle (Switzerland): will have a range of products on offer for automotive, rail and aviation uses, including sunshade materials, nets, tube reinforcements and new possibilities for luggage compartment covers.
  • Windel Textile Far East (Germany): with production undertaken in China, this German firm offers textile greige, half-done and finished materials. They offer nonwoven, knitted and woven fabrics (substrates), and glass fibre solutions. At the fair, they will showcase substrates for adhesive tapes / wire harnessing tapes, and Maliwatt- and coagulated microfibre fleece for covering vehicle interiors.
  • Protechnic (France): they will feature hot melt thermoadhesive nets, webs and films, as well as laminating process in automotive and other industrial applications at Cinte 2018.
  • Kuangda Technology Group (China): having supplied products for global brands such as Volkswagen and Audi, this Chinese supplier will offer automotive interiors, including interior fabrics, seat covers and cushions at the fair.
  • Shanghai Shenda (ShanghaiTex Group) (China): specialising in automotive interior textiles, they manufacture a full range of products including grey car carpet, moulding car carpet, head liners (warp-knitting and nonwoven), seat belt, seat fabrics and more, and have supplied the likes of Mercedes-Benz, BMW, Volkswagen and GM.

Cinte Techtextil China is organised by Messe Frankfurt (HK) Ltd; the Sub-Council of Textile Industry, CCPIT; and the China Nonwovens & Industrial Textiles Association (CNITA). To find out more about the fair, please visit: www.techtextilchina.com.

Source:

Messe Frankfurt Exhibition GmbH

07.05.2018

Clariant showcases support for North America’s plastics industry growth

  • Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
  • Support to “future-proof” medical applications
  • Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

  • Additives, pigments and masterbatches for transportation, packaging, textiles & fibers
  • Support to “future-proof” medical applications
  • Contributing towards more sustainable engineering plastics

Clariant, a world leader in specialty chemicals, turns the spotlight on its increasing on-the-ground support and innovation focus for North America’s four key plastics application segments at NPE 2018 Booth S18155.

Clariant is pushing forward with plans for growth in the region by advancing R&D competencies, and increasing its manufacturing footprint and technical capabilities across its 50+ sites, 3 R&D and 6 technical innovation centers. Clariant’s innovations for the plastics industry include advanced additives, masterbatches and pigments which support the packaging sector in engaging consumers via differentiated, convenient solutions. At NPE, it will also highlight solutions for enhancing and protecting healthcare products, as well as its contribution to stronger and colorful textiles and fibers for everything from e-mobility to industrial applications.

Deepak Parikh, president of region North America, Clariant comments: “Clariant’s product innovation for the US and wider North American plastics industry embraces the region’s fastest growing end-use areas of automotive and construction. It also addresses the impact of trends driven by changing consumer lifestyle preferences and market regulations on other important segments such as packaging and healthcare.”

Transportation
Clariant brings color and protection to support the increasing use of engineering plastics and high temperture resins in automotive interiors, exteriors and under-the-hood. Halogen-free Exolit® OP 1400 provides outstanding flame retardancy to polyamide parts, enhances safety with UL 94 V0 performance down to 0.4 mm and enables the molding of complex parts with no mold deposits and blooming. Exolit OP 1400 has been awarded the Clariant EcoTain®label for outstanding sustainability and performance. At the same time, Clariant offers low-halogen controlled high-performance PV Fast® pigmentswith excellent migration and weather fastness properties to meet the high requirements of today’s transportation and automotive industry. Easy processing Renol® compounds and masterbatches for engineering and high temperature resins provide heat and light stability, and flame retardancy, while maintaining critical flow properties in parts like SMT connectors. Importantly, they are available as small lots which enables customers to purchase only what they require and contribute to a reduction in their carbon footprint.

Packaging
As US packaging manufacturers explore more consumer-friendly, lighterweight and appealing solutions, Clariant is on hand to support their functionality, sustainability-related and color desires. Clariant Pigments has an innovative cooperation with Konica Minolta and matchmycolor to enable fast, precise and efficient color matching of HDPE products, using select organic PV Fast and Graphtol® pigments that comply with FDA regulations. The ColorWorks®center in Chicago is dedicated to US brand managers and designers with teams of color design experts to create color formulations faster than ever before for bottles, caps, closures and films.

According to market reports, plastic pouches are gaining share from traditional pack types in packaged food and are mainstream in home care. To support smoother and more environmentally-compatible processing especially for film applications, Clariant offers an FDA-compliant, vegetable-based powder amide wax, Licolub® FA 1, which acts as a slip and anti-block agent. It is suitable for polyolefins and PVC.

Textiles & Fiber
At NPE 2018, Clariant puts the focus on strong and colorful textiles, carpets and industrial fibers. New AddWorks® TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min. Clariant also offers a broad range of colorants for polypropylene, polyester, polyamide and acrylic fibers, featuring migration fastness, chemical stability, light- and weather-fastness.

Healthcare
Clariant supports risk control and regulatory compliance for medical polymer and pharmaceutical packaging solutions. Its Mevopur® color and performance masterbatches and compounds include a USP Class 6 line of compliant products and multiple global ISO, 87, 88, and 661.1 certifications ahead of the market deadline. Clariant also offers selected FDA-compliant organic pigments and polymer soluble dyes that meet purity migration fastness as well as toxicological properties for medical devices and pharmaceutical packaging.

03.05.2018

Clariant debuted additive solutions and launched AddWorks® at Chinaplas 2018

•    New, sustainable, ready-to-use solutions for plastic auto parts to support China’s electric vehicle boom
•    Stronger, softer nylon polyamide fibers plus fast processing for clothes, carpets & industrial applications
•    AddWorks blends lower total cost of ownership & reduce production complexity while enhancing performance

Muttenz, May 3, 2018 – Clariant, a world leader in specialty chemicals, introduced new additive solutions for plastics materials at Chinaplas 2018.

“Our innovations focus on higher performance at better convenience for a sustainable future,” says Stephan Lynen, Head of Clariant BU Additives. “At Chinaplas 2018 we demonstrated our technical and market capabilities around the theme of e-mobility. The immense changes in mobility call for lighter, safer and smarter vehicles. We offer new additive solutions, such as AddWorks, and technical capabilities to respond to this demand. We are accompanying this with a series of investments such as new production facilities in China.”

•    New, sustainable, ready-to-use solutions for plastic auto parts to support China’s electric vehicle boom
•    Stronger, softer nylon polyamide fibers plus fast processing for clothes, carpets & industrial applications
•    AddWorks blends lower total cost of ownership & reduce production complexity while enhancing performance

Muttenz, May 3, 2018 – Clariant, a world leader in specialty chemicals, introduced new additive solutions for plastics materials at Chinaplas 2018.

“Our innovations focus on higher performance at better convenience for a sustainable future,” says Stephan Lynen, Head of Clariant BU Additives. “At Chinaplas 2018 we demonstrated our technical and market capabilities around the theme of e-mobility. The immense changes in mobility call for lighter, safer and smarter vehicles. We offer new additive solutions, such as AddWorks, and technical capabilities to respond to this demand. We are accompanying this with a series of investments such as new production facilities in China.”

Clariant’s new AddWorks solutions – AddWorksATR 146, AddWorks LXR 568 and AddWorks TFB 117 – are specifically aimed at improving performance and efficiency of plastics materials for compounders, polymer and fiber producers in China’s major plastics manufacturing segments. All three solutions are part of the globally available portfolio.

The full AddWorks portfolio consists of differentiated market-specific synergistic additive blends that streamline production processes and create value for customers while enhancing performance. Each solution is customized to specific market needs, underlined by broader considerations such as emission reduction, and less energy and resource usage.

Sustainability and performance for the world’s largest auto market
To support the significant investment in electric vehicles in China, Clariant launched two additive innovations that improve the lifetime of lightweight automotive parts and under-the-hood applications and reduce VOC emissions in an easy to use single solution.

AddWorks ATR 146 is a new low dosage, sulfur-free heat and light stabilizer for filled polypropylene (TPO) compounds used in interior applications. Its exceptional heat and light stability and long term color retention offers the automotive industry unmatched performance. It shows no surface cracking after 700 hours at 150°C, which enables dashboards, instrument panels, door panels and pillars to maintain their aesthetics longer than with traditional stabilizers. It also contributes to reducing blooming and VOC emissions, supporting the common effort to make automotive interiors healthier and odorless.

AddWorks LXR 568 is a high performance processing stabilizer that helps to prevent plastic resins, especially polyolefins, from degradation at high processing temperatures. For the automotive industry, this reduces the tendency of injection molded polypropylene interior car parts to turn brittle during heat exposure, enabling them to maintain a defect-free surface. It also has low migration and low fogging that support healthier in-cab environments.

AddWorks LXR 568 combines outstanding color and melt flow protection with good resistance to hydrolysis and high thermal stability. This makes it ideal for interior and under-the-hood powertrains and wider application areas such as packaging films. It is available in free-flowing pills and micro-pills which are easy and convenient to use.

Softer, stronger polyamide fibers for clothes, carpets and industrial applications
Within the next three years, China is expected to account for 40% of the world’s nylon production and more than 30% of the nylon resin consumed globally[1]. The new AddWorks TFB 117 offers a number of benefits to help stabilize and smoothen fiber production processes, protect color, and improve heat stability and mechanical properties of fibers. AddWorks TFB 117 ensures smooth spinnability with less filaments breakage, even at low processing temperatures and at high speed spinning up to 5,500 m/min.

Martin P. J. John, Head of BL Performance Additives at Clariant, comments: “AddWorks solutions are an ideal fit with China’s priority of achieving more sustainable production. They save time and reduce complexity along the production process, with easy to use formats that reduce health risk and chemical waste. Our new state-of-the-art production facility in Zhenjiang, China, which opens later this year, is dedicated to the manufacturing of AddWorks to deliver innovative solutions tailored to the needs of the market. Made for China in China.

In addition to AddWorks, Clariant presented Exolit® OP 1400, a highly stable non-halogenated flame retardant enhancing safety during the charging process. It also provides outstanding thermal stability for under the hood applications. Exolit OP 1400 has been awarded the Clariant EcoTain® label for outstanding sustainability and performance.  

Clariant also introduced two ranges of performance waxes that smoothen the production of automotive plastics for under the hood applications, Licowax® and Licocare® RBW. The recently launched Licocare RBW is a series of multi-purpose additives based on crude rice bran wax. They offer better shaping flexibility, better mechanical properties and enhanced surface finish, which results in a reduced rejection rate and a more effective dosage.

Source:

EMG PR

02.05.2018

Demand for European technical textiles attracts leading companies to Cinte Techtextil China

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

Exhibitors from eight countries have already confirmed to participate in the fair’s European Zone. They join an expected 500-plus total exhibitors from around the world. The 2018 edition of this biennial fair takes place from 4 – 6 September in halls N1 – N3 of the Shanghai New International Expo Centre.

While China retains its edge in terms of technical textiles and nonwovens production capabilities, in the eyes of Chinese buyers, European suppliers are still the leaders when it comes to technology and innovation. This was widely reported by European exhibitors at the previous edition in 2016 of Asia’s leading biennial trade event for the industry: Cinte Techtextil China.

“In the Chinese market, buyers want good quality products, so overseas companies, and products with recognised quality certifications, have a lot of potential,” Ms Ping Chen, General Manager of IBENA Shanghai Technical Textiles commented. “As a leading German company in the industry, our products are welcomed by many buyers at this fair. It is also important to be in the German Pavilion as this signals to buyers that we have quality products, and it attracts more attention.” Swiss firm Sanitized AG had the same experience. “As a Swiss company in the European Zone I believe it’s an advantage, as some local buyers have more confidence towards imported products,” Mr Steven Liu, Sales Manager said.

Other exhibitors commented on the long-term trends in the Chinese market. “There’s a definite shift to more high-quality machinery in China that isn’t affected by what’s happening in the overall economy. Moreover, there are opportunities for overseas suppliers as there is still a gap between us and what Chinese companies produce,” Dr Joachim Binnig, Vice President, Head of Development & Technology, Autefa Solutions Germany GmbH explained.

Mr Roger Zhang, Sales Manager for German firm J.H. Ziegler Nonwovens and New Materials commented: “Our products are mainly for high-end Chinese customers, such as BMW and Audi. The Chinese market has gradually matured, but the production capability for high-performance products which are energy efficient and eco-friendly is still developing, so there is a lot of space for overseas brands to develop here.”

European Zone highlights
This year’s European Zone will feature around 30 exhibitors from eight countries, including Austria, Belgium, the Czech Republic, France, Italy, the Netherlands, Sweden, Switzerland and the UK, while further exhibitors can be found in national pavilions from Belgium, the Czech Republic, Germany and Italy. Some of the exhibitor highlights in the European Zone include:

  • Arkema (France): with brands including PMMA Altuglas, Rilsan, Pebax, Kynar PVDF and Bostik, they will present polymer resin for fibres and yarns, which apply to a wide range of applications, at the fair.
  • Dakota Coating (Belgium): specialists in thermoplastic and thermosetting adhesives, their polymer products, based on polyethylene, polyolefin or mixtures, ethylene vinyl acetates, co-polyamides, polyurethanes and co-polyesters, are suitable for automotive, building, heat transfer and sound insulation uses.
  • Lenzing Plastics (Austria): a new exhibitor at the fair, they are a leading manufacturer of polyolefin and fluoropolymer products, such as Thermoplast and PTFE products. One of their core competencies lies in the monoaxial stretching of films and filaments, and they offer special solutions in the fields of construction & insulation, medicine & hygiene, packaging and cables, as well as automotive and technical textiles. They will highlight their PROFILEN® PTFE product at the fair, and with its extreme durability and very smooth surface, it is highly valued in many niche applications in the technical and medical sectors.
  • Protechnic (France): leading manufacturers of hot-melt adhesives and plastic printed films, they will showcase hot melt thermo-adhesive nets, webs and films at the fair.
  • Trelleborg Coated Systems (Italy): another new exhibitor this edition, they produce high-performance, engineered coated fabrics. They offer a wide variety of substrates – from Kevlar® to silk – with a choice of weaving methods.
Logo CHOMARAT (C) CHROMARAT
26.02.2018

CHOMARAT presents its latest innovations at the 2018 JEC World

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

CHOMARAT, the composite reinforcement specialist group, is launching its multiaxial glass NCF for thermoplastic composites. The unique patented stitching yarn used can withstand processing temperatures to 400°C, making it an innovative industrial solution for thermoplastic composites and an alternative to the woven reinforcements used especially in the automotive sector. For the first time, CHOMARAT is also exhibiting a unidirectional carbon NCF reinforcement that is adapted to the productivity and performance requirements in the wind energy sector.

AN INNOVATIVE INDUSTRIAL SOLUTION TO REINFORCE AUTOMOTIVE THERMOPLASTICS
Thanks to a unique patented stitching yarn, the glass NCF reinforcement (G-PLY™) developed by CHOMARAT offers new possibilities in thermoplastic RTM and organosheet processes. “This is an especially innovative solution, utilizing stitching yarns that are compatible with processing temperatures to 400°C. These multiaxials improve the performance and provide a lot of construction freedom in terms of fibre orientation. These new design possibilities contribute to structural optimization. The quest for more lightweight vehicles, shorter cycle times and lower cost is a major issue for all builders,” explains CHOMARAT Automotive Market Manager Francisco De Oliveira.
This new heat-stable G-PLY™ reinforcement can withstand very high processing temperatures without deformation and provides optimal mechanical performance.

A CARBON UD TO REINFORCE EXTRA-THICK WIND TURBINE STRUCTURES
For the first time, CHOMARAT is exhibiting an infusion-moulded laminate made with 150 plies of its new unidirectional carbon C-PLY™. This 600g/m², high-permeability NCF can be used to create extra-thick structures, in particular the wind-turbine blade stiffeners, or spar caps. “Cost reduction is the challenge in the wind energy industry. Increasing the blade length by incorporating carbon stiffeners increases power, and so it also lowers the cost of the energy,” says CHOMARAT Wind Energy Market Manager Raphaël PLEYNET. The carbon UD developed by CHOMARAT provides a solution to achieve the goal to optimize the weight/power ratio. The UD’s high permeability reduces cycle times and lowers the blade production costs.

Professor Sung Ha from the University of Hanyang will give a conference on composite challenges in the wind energy sector at 11:30 am on Wednesday, 7 March 2018 at JEC World.
Established in 1898, CHOMARAT is an international industrial textile group, involved in three businesses: Composites Reinforcements, Construction Reinforcements, Coatings & Films–Textiles. The privately held company operates in France, Tunisia, the United States and China to service its global customers.
CHOMARAT leads a strong innovation strategy, rising to challenges, developing materials for the future. Hence, the Group invests in new technologies and enters into collaborative research programs with universities and technical centers worldwide.
CHOMARAT offers strong technical know-how and mastery of complex technologies in fields ranging from automotive, aerospace, sports, energy, marine, construction, and also in markets requiring creativity and expertise, like luxury goods.

More information:
CHOMARAT JEC World 2018
Source:

Dorothée DAVID & Marion RISCH, AGENCE APOCOPE