From the Sector

On the occasion of the 2023 UCI Cycling World Championships, the Union Cycliste Internationale chose Santini to make the bibs from recyclable materials. The UCI's partner brought together a pool of companies, all in the Bergamo area (Italy): RadiciGroup, Sitip, EFI Reggiani and Acerbis.

In 2022, the Union Cycliste Internationale released the UCI Climate Action Charter, which lays out an action plan to advance the environmental sustainability of the sport with a specific principle to reduce waste and accelerate the transition to a circular economy. This year, the UCI Cycling World Championships, which will be held from 3 to 13 August, are bringing together most of the cycling disciplines in a single location: Glasgow and across Scotland.

To mark the occasion, the UCI turned to its Official Partner, Santini, to make the bibs that the staff (judges, volunteers, commissaires etc.) and accredited photographers wear throughout the event. The bibs are "eco-designed", which means they are specifically created to have a second life after use. Once the event is over, the bibs could be collected and sent to RadiciGroup and transformed into new material, to be then processed by Acerbis to create X-Elite handguards for mountain bikes. This project is a concrete example of the circular economy at work, allowing 100% of the materials used to be recovered.

To optimise the production cycle of the bibs for the 2023 UCI Cycling World Championships, the products must be eco-friendly from the very first phase. The fabrics were therefore made from Italian nylon yarn produced by RadiciGroup. The choice of nylon – an infinitely recyclable thermoplastic material – is intertwined with UCI's sustainability goals for "limited-use" garments: RadiciGroup was able to channel its know-how and expertise in the field of chemistry to create "circular" bibs, working alongside the other partners. As the innovative yarn selected by RadiciGroup allows for easy and high-quality printing, the fabric is also customisable. The yarn is then provided to Sitip to create the "ARAS NG" warp-knitted fabric (95 g/100 m2): a recyclable single-fibre material made from 100% polyamide. The resulting fabric is the first nylon of its kind, designed to meet the transfer printing needs of the third project partner, EFI Reggiani, as well as the recyclability standards requested by RadiciGroup. The choice of fabric was born from extensive applied research, in which EFI Reggiani tested a wide range of fabrics to find the best colour results and the best resistance to rubbing and perspiration, which is vital for the bibs' intended use. In addition to using the new GOTS-certified EFI Reggiani IRIS Plus water-based inks, EFI Reggiani opted for a printing solution on transfer paper that does not consume water and requires a minimal amount of energy per square metre. Finally, the white fabric from Sitip and the transfer paper printed by EFI Reggiani arrived at Santini, who were responsible for transferring all the graphics for the 2023 UCI Cycling World Championships bibs from the paper onto the fabric. Santini also took care to assemble the garments using only thread and components made from nylon or chemically similar materials, allowing the bibs to enter the recycling process at the end of their lives without any further processing.                   

Highlights Q2 2023 (compared with Q2 2022)

• Revenue 4% down on unfavorable exchange rates, 3% up in constant currencies1
• Pricing up 5%, volumes 1% lower
• Operating income up 36% at €279 million (2022: €205 million)
• Adjusted operating income2 up 25% at €311 million; ROS3 11.3% (2022: €249 million and 8.7%)
• Net cash from operating activities positive €305 million (2022: negative €52 million)

2023 Outlook
AkzoNobel expects the ongoing macro-economic uncertainties to continue and weigh on organic volume growth. The company will focus on margin management, cost reduction, working capital normalization and de-leveraging.
Cost reduction programs are expected to partly mitigate higher than expected inflationary pressure on operating expenses for 2023. AkzoNobel expects declining raw material costs to have a favorable impact on profitability.
Based on current market conditions, AkzoNobel targets to deliver €1.40 to €1.55 billion adjusted EBITDA.
The company aims to lower its leverage ratio to less than 3.4 times net debt/EBITDA, including the impact of the Kansai Paint Africa acquisition, by the end of 2023 and return to around 2 times post-2023.

‘Best of Bangladesh’ -- the first ever sole ‘Made in Bangladesh’ show in Europe -- aims to open the doors for Europe to experience what the Bangladeshi industries has to offer.

As Bangladesh celebrates five decades of strong ties with Europe, in order to further strengthen the ties and deepen collaborations with the partners across Europe, Bangladesh Apparel Exchange, supported by the Bangladesh Embassy in the Netherlands, is organizing the event in Amsterdam, Netherlands on September 4th and 5th, 2023.

The ‘Best of Bangladesh’ aims to serve as a dynamic platform to showcase the progress and potential across diverse sectors of Bangladesh economy, especially manufacturing.

A total of 40 Bangladeshi companies each of which is the country’s best from apparel, textile, leather, Agro, jute, handicrafts, pharmaceutical, light engineering, digital industry, FMCG and bicycle will showcase their sustainable and innovative products in the Best of Bangladesh.  

Bangladesh economy ranks as the world’s 37th largest now and it’s rapidly-expanding. The ‘Best of Bangladesh’ is being organized to accelerate interests and burgeoning engagements between the entrepreneurs and private sector entities on both European and Bangladeshi sides. The event has been structured to serve as a platform to showcase the multifaceted progress made and potential across diverse sectors of Bangladesh’s economy.

There will be an inaugural and 7 interactive panel sessions at the Best of Bangladesh on the topics ‘Bangladesh – Perspectives From An Emerging Economy’, ‘Bangladesh - Your Sustainable Sourcing Destination’, ‘Empowering the Future: Advancing Safety & Well-being for Garments Workforce in Bangladesh’, ‘Bangladesh Agro-Food: A Next Opportunity for Collaboration’, ‘Impact Investing - The Next Frontier’, ‘Sustainable Synergy: Circular Economy, Climate Action & Bangladesh’s Future’, and ‘Digitization and Digital Economy in Bangladesh’.

Ada Hefetz, an Israel-based wedding dress designer, has introduced a new attention-grabbing collection with intricate, showstopping elements produced using Stratasys’ advanced direct-to-textile 3D printing technology. Showcased recently at Milan Design Week, the three unique dresses are based on Hefetz’s Flower of Life theme and were produced using Stratasys’ 3DFashion™ technology as part of her latest series celebrating matrimonial union, the circle of life, and design.

Known for designing haute couture bridal dresses combining vintage style and classic modern chic, Ada Hefetz is renowned for constantly pushing the boundaries of design. This is her first completed project using 3D printing.

The wedding dresses feature complex geometrical shapes, depicting the ‘Flower of Life’, a sacred geometry dating back to ancient Egypt. The intricate pattern is composed of overlapping circles that intersect to form flowers, which Ada Hefetz has combined with her design of a lily to symbolize the union between two individuals and the circle of life. The inspiring design uses Stratasys’ translucent VeroVivid™ resin material with Stratasys’ J850™ TechStyle™ 3D printer, which can be printed in over 500,000 unique colors with varying levels of flexibility, simulating different textures and finishes.

Ada Hefetz’s Flower of Life-themed 3D printed wedding dresses are currently on display at Milan’s D-House Urban Laboratory, which is owned and managed by Dyloan, the leading Italian manufacturer serving the high-end fashion sector.

Archroma is bringing the entire portfolio of 5,760 Archroma Color Atlas colors to swatchbook, a platform for material digitalization and sourcing.

The new partnership provides fashion, apparel and textile designers and manufacturers with an elevated standard for color accuracy that meets the needs of today’s increasingly technology-driven and integrated supply chain. This will help the textile and fashion community to improve sustainability, whilst lowering costs and shortening turnaround times.

The Color Atlas by Archroma® was launched in 2016 to provide fashion designers and stylists with off-the-shelf color inspiration that can be implemented in production with just a few clicks.

Designers will use the 5,760 Archroma Color Atlas colors on swatchbook to rapidly develop accurate digital colorways and visualize their final product. They can then share these digital swatches with their manufacturing partners, providing access to the swatchbook metadata, which can include information such as the materials’ composition, weight and color.

This will streamline the overall design and production process for color-critical fashion and textile products, allowing for faster turnaround. Digital materials supported by trusted coloration technology also reduce the need for samples and eliminate physical swatchbooks, bringing environmental benefits and lower costs to brands and suppliers.

All 5,760 Color Atlas by Archroma® colors are now available free of charge to subscribers on the swatchbook platform.

Kornit Digital LTD. announced Amaze Software, Inc. – parent company of the Amaze, Spring, and Outfts platforms – has selected KornitX Workflow Solutions and Kornit MAX digital on- demand fabric and textile decoration technologies as the platform to deliver their vision. Combined with the Amaze Creator Commerce Platform, the companies will jointly bring the power of on- demand production and fulfillment to new and existing social media creators, enabling them to better monetize branded products.

Kornit’s Global Fulfillment Network helps companies like Amaze Software connect creators with high-quality garment and textile production fulfillers across the globe. The platform is backed by the KornitX workflow engine, seamlessly integrating across industry-proven Kornit MAX technology- based fabric and textile decoration systems for end-to-end production, visibility, and control.

The  Spring platform offers an opportunity for fans to make purchases directly from where they consume the creator’s content (social platforms including Instagram, TikTok Shops, Twitch, and more). This allows creators to significantly enhance engagement and cultivate a more profound brand presence.

Increasing energy and resource efficiency in the construction sector will be key to the EU’s ambition of achieving climate neutrality by 2050. By enabling the manufacture of strong, durable and lightweight products, composite materials can help the construction sector improve its environmental sustainability, as well as reduce total lifecycle costs. The latest EPTA industry briefing, Pultruded composites contribute to a more sustainable future for construction, discusses how pultruded composites answer the need for materials offering high performance, faster installation, corrosion resistance and low maintenance.

The report is available to download from the EPTA website.

The future of construction
As one of the largest global users of energy and raw materials, the construction industry is under immense pressure to improve its sustainability. At the same time, it must respond to demands for improved performance and reduced total cost of ownership. New materials will be needed to minimise the use of natural resources, enable a reduction of carbon footprint and facilitate circular economy practices. Choosing the optimum materials required for durability throughout the lifecycle will be increasingly important. A shift to off-site production is also forecast, where factory-controlled environments and automated processes can improve quality control, lower waste, and reduce work on site.

Lightweight pultruded parts can be pre-assembled into modules or complete structures in the factory for faster installation on site. Lightweight profiles lower energy use during transportation and installation, and a longer service life combined with minimal maintenance can deliver a reduced through-life carbon footprint. Pultruded parts such as profiles, gratings, beams, tubes and planks are increasingly found in a range of building, construction and infrastructure applications. Examples include bridge decks, fencing, stairs and handrails, train platforms, cladding, utility poles, modular building concepts, and window frames.

One application offering large growth potential for composites is bridges. Composite bridges are being designed to provide a service life of 100 years and unlike steel bridges do not require regular repainting to protect them from corrosion. Over recent years, pultruded glass fibre composite has become a highly popular choice for pedestrian and cycle bridges. Pre-fabricated ‘easy fit’ bridge decking planks, pre-assembled bridge modules and complete bridge ‘kits’ are now available. Corrosion-resistant composite bridges are ideal for use near water or on the coast, and in remote locations where regular maintenance operations would be difficult. A composite bridge can deliver the same performance as a steel structure with a weight saving of up to 50% or more. This enables more streamlined bridge designs which require less substantial supporting structures and foundations, greatly reducing consumption of materials and energy. Lightweight also results in easier logistics and simplified installation. Pultruded are more easily transported to the construction site, with lower fuel consumption, and easier to move on site, often reducing labour requirements and the capacity of lifting equipment.

A lifecycle approach
As the construction industry looks to the future, the environmental and economic benefits of composite materials linked to easier logistics and installation, durability and low maintenance are becoming increasingly valued. More projects are demonstrating the benefits of composite materials and standards covering the design, fabrication and installation of pultruded profiles are making it easier for the construction industry to use them. With ongoing development and collaboration, pultrusion has the potential to contribute to a more sustainable future for construction and many other industries. EPTA will continue to promote the advancement of pultrusion technology and its applications and foster sustainable practices within the industry.

From 9 to 11 August 2023, IFCO, Istanbul Fashion Connection will be held for the fourth time at the Istanbul Expo Center at 6 Halls. The fashion fair is organised by ITKIB Fairs, a subsidiary of Istanbul Apparel Exporter's Association, the umbrella organisation of the Turkish fashion and apparel industry.

IFCO has developed into a hub for fashion enthusiasts, designers, buyers and trendsetters and has established itself as an important international platform for the global fashion industry. IFCO brings together around 400 exhibitors from all product groups of the apparel and fashion industry under one roof in six clearly structured halls: womenswear, menswear, childrenswear, denim, sportswear, evening and occasion wear, bridal wear, lingerie, hosiery, leather and fur, shoes and accessories.

From high-end tailoring to streetwear and sustainable fashion, the fair will present a wide range of styles and trends. IFCO Brands present market leaders such as İpekyol, Climber, Damat, Kiğılı, B&G Store, Lufian, Jakamen, NaraMaxx, Giovane Gentile and Lee Cooper using IFCOto further expand their international network.

THE CORE ISTANBUL, successfully launched at IFCO in February, once again features a fascinating mix of established and emerging important Turkish designerswith their creative and innovative creations.

One focus of the fair will be the topic of sustainability. Companies will show their innovations. Ekoteks, the association's sustainability laboratory, supports the development of sustainable production and will also have a stand at IFCO to present the latest developments in this area.

The extensive supporting program with fashion shows and trend zones inspires visitors with the latest fashion trends and styles, while the seminars and workshops address current topics in the fashion industry such as digital transformation, smart clothing, technical textiles and sustainability.

30,000 visitors from more than 100 countries are expected at the upcoming IFCO, mainly from the EU, UK, Eastern Europe, CIS, North Africa, Middle East and the USA. The show also offers networking events, such as B2B Speed Dating, which brings together fashion designers, brands, manufacturers, buyers and industry experts to exchange ideas and forge potential business relationships. This is an important aspect of the fair that has helped to position Istanbul Fashion Connection as a key meeting place for the fashion industry.

PrimaLoft Inc., a leader in advanced material technology, announced the reorganization of its European sales management team. Effective June 1st, Leonardo Loro has promoted to the position of Sales Leader, Europe. Additionally, the company welcomes Mario Vlietinck as the new Territory Manager for France, Benelux & Denmark.

To further streamline operations and maximize opportunities, PrimaLoft is also implementing a territory reorganization to better align existing sales talent with market opportunities. These moves will strengthen the company’s sales strategy in the region.

Leonardo Loro will lead the European sales team and report directly to Chris Humphris, SVP, Global Sales. "With over a decade of experience as the sales and marketing manager for the southern European market, including France, Italy, Spain, and Portugal, Leonardo has demonstrated exceptional skills in building customer relationships and identifying new business opportunities. His invaluable contributions to our sales efforts make him the ideal candidate to lead and elevate our business in Europe", said Humphris. In his new leadership role, Loro will continue to manage brands in Italy and Spain, as well as military sales efforts in Europe.

Mario Vlietinck joins the PrimaLoft team and will be responsible for managing and developing business relationships with PrimaLoft brand partners in France, Benelux & Denmark. Vlietinck brings a wealth of knowledge in sales and the outdoor industry, previously serving as the head of Apparel & Footwear for Katoen Natie, as well as working for brands such as Reebok, Merrell, and Vannese. "Mario’s background in product development, business development, and international sales positions him as a great asset to our company goals,” said Humphris. Vlietinck will report to Leonardo Loro.

Sales Territory Reorganization
Wim Neels, VP of business development for fashion and lifestyle, will be responsible for all Fashion & Lifestyle brands across Europe, with the exception of Italy & Spain, which remain the responsibility of Leonardo Loro.

Bartosz Lassak will expand his territory responsibility to include outdoor performance brands in the United Kingdom, in addition to Eastern Europe and Turkey. He will also handle any opportunities from North Africa, as well as any brands located outside of other European coverage.

Valerie Raths Goesel will oversee the management of all outdoor performance brands in the Germany, Austria, and Switzerland region.

Mats Jengard will remain the territory manager for Scandinavia (Norway, Sweden, Finland & Iceland), focusing outdoor performance brands.

Dr. Laurie-Ann Agama, Acting Assistant U.S. Trade Representative (USTR) for Textiles, wrapped up a three-day visit of state-of-the art U.S. textile manufacturing facilities in North and South Carolina, highlighting the importance of trade policies that bolster the competitiveness of the vibrant domestic supply chain that contributes significantly to the U.S. economy and workforce.

Dr. Agama, who advises the nation’s top trade chief on textile and apparel trade policy matters and conducts and oversees negotiations affecting textiles and apparel products, was joined by USTR textile trade officials in touring seven textile manufacturers including: Glen Raven, Barnet, Standard Textile, Parkdale Mills, Beverly Knits, Gildan, and Unifi.

Her three-day tour culminated in an industry roundtable discussion with key textile executives hosted by Unifi, in Greensboro, N.C.

U.S. textile executives spanning the fiber, yarn, fabric, and finished product textile and apparel industries participated in the roundtable and outlined critical policies, such as: the importance of maintaining the yarn forward rule of origin in the Dominican Republic-Central America Free Trade Agreement (CAFTA-DR) and other trade agreements; advancing the Miscellaneous Tariff Bill (MTB) and its importance to domestic manufacturers; closing the de minimis loophole in U.S. trade law; addressing larger systemic trade issues, particularly the use of forced labor, with China; and upholding buy American and Berry Amendment government procurement policies.

“We deeply appreciate Assistant USTR Agama’s visit to the heart of the U.S. textile industry in North and South Carolina this week to meet with U.S. textile executives and experience first-hand the breadth of the industry’s innovation, advanced sustainability practices, capital investments and critical contributions to local economies and the U.S. economy as a whole,” said Kim Glas, president and CEO of NCTO. “The three-day visit by Dr. Agama and the USTR textile team included facility tours of several NCTO member companies, all of which have made major investments in state-of-the-art manufacturing facilities that are part of a broader domestic industry supply chain that produced $65.8 billion in output in 2022 and employed 538,000 workers.”

Glas continued: “We are also grateful for Dr. Agama’s participation in the industry roundtable hosted by Unifi and substantive discussions around policy opportunities and challenges. We look forward to working closely with Dr. Agama, the USTR textile team and U.S. Trade Representative Ambassador Katherine Tai to advance policies that provide incentives for onshoring and nearshoring production and bolstering the industry’s competitiveness, while enforcing policies that address illegal trade practices that undermine this industry.”

“The U.S. textile industry has always been resilient, innovative, and a driving force of our nation’s competitiveness,” said Acting Assistant U.S. Trade Representative for Textiles Dr. Laurie-Ann Agama. “For USTR, this local engagement and conversations underscore our need to create trade policies that put workers first and promote inclusive economic growth. The spinning, knitting, and weaving operations of the textile industry are at the center of many communities across the Carolinas. This was another opportunity to hear first-hand how we trade can create jobs that allow workers, businesses, and communities to thrive.”