From the Sector

After the successful spring edition of PERFORMANCE DAYS in Munich in March, the Functional Fabric Fair Spring 2025, powered by PERFORMANCE DAYS, made a strong statement in a market still facing global supply chain turbulence: With a 9% increase in attendance and a 30% expansion of the exhibition space at the Oregon Convention Center in Portland, the event from April 14–16 brought together over 320 sustainably certified suppliers with decision-makers from leading performance and outdoor brands such as Adidas, Patagonia, REI, Nike, and Vuori.

"In times of economic uncertainty and continued volatility in global supply chains, the 100% exhibitor participation underscores the relevance of our event," said Steve McCullough, Event Vice President. The focus was clearly on resilient partnerships and forward-looking sourcing for the 2026/2027 collections.

Highlights and Innovation
Parallel to PERFORMANCE DAYS in Munich, the Functional Fabric Fair in Portland featured carefully curated theme areas that promoted targeted exchanges between brands and suppliers, offering visitors valuable market insights and hands-on experience with innovative materials – a perfect complement to the event’s comprehensive educational program.

Strong program & networking
The sold-out “DAY 0” Sustainability Workshop (230+ attendees) set the tone with keynote speaker Jill Dumain, addressing material traceability. In the following days, practical Expert Talks were held on the show floor. Event highlights also included:

• • Design Lab Live with designer Kelley Dempsey
• • Guided tours & after-hour events for networking

A common takeaway from many exhibitors and visitors: The Functional Fabric Fair is an essential industry meeting point for forward-thinking sourcing and innovation in the textile sector.

"This event has become a fixed point in my sourcing calendar," says Cassia Lewis Cameron from Patagonia. "With some of the most advanced and sustainable suppliers in the industry, the pre-vetted supplier list saves us a lot of time in the qualification process – and gives us direct access to innovation partners we can trust, even when global logistics systems are under pressure."

Exhibitors also appreciate the fair as an efficient industry meeting point: "The Functional Fabric Fair allows us to have many relevant meetings in a short amount of time – with other suppliers we work with as well as with brands and designers," says John Holiday from YKK USA. "We were able to achieve a lot in just a few days."

Fibre and fabric production technologies – especially in the area of composite reinforcements – have played an as-yet largely unheralded role in the development of the UK’s Formula One industry, but the British Textile Machinery Association (BTMA) aims to change that.

Motorsport Valley
“If there’s one thing the UK does well, it’s Formula One, with seven of the ten F1 teams located within just an hour of each other in the midlands region known as Motorsport Valley,” explains BTMA CEO Jason Kent. “They are all linked to a national network of around 4,500 companies involved in a motorsport and high-performance engineering industry worth around £9 billion annually and employing 40,000 people. This network draws on the services of a significant number of our member companies.”

“With the exception of the engine, virtually every part of a Formula One racing car now starts from a textile, including the bodywork, the tyres and many of the latest fuel systems,” says Richard Kirkbright, project manager at Leeds-based Roaches International. “This has influenced developments in the broader automotive sector, in addition to the aerospace industry.”

Show cars and memorabilia
While best known as the developer of textile testing systems, Roaches has over the years also supplied advanced autoclaves to the UK’s composites industry, including a recent delivery to Northampton-based Memento Exclusives, a specialist in the production of show cars working directly with F1 and its leading teams.

Each major F1 team sponsor is supplied with one or two show cars for use at exhibitions and a wide range of other promotional activities arranged around the racing event calendar. These cars have no engine and their bodies may be made of fewer carbon fibre plies, but they are otherwise identical to the latest cars being raced by the F1 teams.

Memento Exclusives has its own in-house carbon fibre parts manufacturing facility and the integration of the Roaches autoclave has significantly expanded its capabilities in show car production.

Master bakers
“Composite materials undergo a metamorphosis in the autoclave which subjects them to both mechanical and chemical processes,” explains Richard Kirkbright. “Trapped air and volatiles are expelled and plies are consolidated under precise pressure. Heat cycles are then introduced, curing the resin systems and yielding flawlessly crafted components. Autoclave specialists are a little like master bakers, knowing exactly how to treat their ingredients at every stage of the process, to achieve the desired final product.”

“The Roaches autoclave now enables us to cure large components with full control and achieve a swift turnover of parts while ensuring the highest quality finish,” adds Terry Wasyliw, Head of Build for Memento Exclusives.

McLaren’s influence
Woking, UK-headquartered McLaren was the very first F1 team to introduce a car chassis manufactured entirely from carbon fibre composites back in 1981, setting the ball rolling for the creation of a completely new and global supply chain.

McLaren has this year unveiled a world-first in supercar engineering – aerospace-derived Automated Rapid Tape (ART) carbon fibre, developed at the dedicated McLaren Composites Technology Centre (MCTC) facility in Sheffield. This is being employed to create the active front wings of the W1 hypercar which has a starting price of $2.1 million.

A rear floor component was also developed for McLaren as part of the recently-completed £39.6 million ASCEND programme involving a range of UK partners, including BTMA member Cygnet Texkimp.

Handling, converting and decarbonisation
A wide range of handling and converting machines are supplied to the composites industry by Cygnet Texkimp, including bespoke creels, prepreg, coating, slitting and filament winding machines.

Its technologies are employed in the construction of composite components for aerospace and automotive, as well as in the production of tyre cord and more recently in the advanced construction of hydrogen storage vessels which are largely viewed as the future of F1 propulsion, along with advanced batteries for electric vehicles.

Cygnet Texkimp has been involved in the F1 supply chain for over 20 years and most carbon fibre used in the industry has been processed on one of its VHD creels. The company is also the largest independent manufacturer of prepreg machines in the world and is currently leading the design and build of the UK’s first carbon fibre research lines for a project led by NCC (National Composites Centre) to accelerate the development of more sustainable carbon fibres.

In addition, Cygnet is licensed to design and build the DEECOM® composite recycling system developed by new BTMA member Longworth Sustainable Recycling Technologies, the first of which was recently commissioned by the Henry Royce Institute in Manchester. DEECOM® is a zero emission, low carbon pressolysis solution using pressure and steam to reclaim pristine condition fibres and resin polymers frocm production waste and end of life composites.

“Decarbonisation is a major priority for manufacturers globally,” says Cygnet CEO Luke Vardy. “At Cygnet Texkimp, we’re developing the capability to process technical fibres in ways that enable lightweighting, hydrogen power and electrification, reduce waste and revolutionise the end-of-life management of composite materials and parts. In collaboration with our industry partners, we’re bringing to market some of the most innovative new fibre processing technologies ever developed to deliver real-world benefits that support the sustainability agenda.”

Prepregging
Another new BTMA member, Emerson & Renwick (E+R), a specialist in print, forming, vacuum and coating technologies, also supplies technology for the production of carbon fibre prepregs, which are integrated rolls of fabrics and resins.

Its most recent 1.7-metre-wide line supplied to a customer in Italy operates at speeds of 40+ metres per minute for web coatings or prepreg fibre and resin consolidation, or a combination of both processes. It is distinguished by an ultra precise three-roll reverse roll coater for the processing of high viscosity thermo-activated resins and enables the automatic changeover of sensitive woven fabric materials at zero tension, with three high precision calendaring nips with hot/cool plates. Multiple unwind and rewind systems for intermediate lamination steps include side loading and reliable lap splicing and zero speed splicing with a web accumulator for the main product rewind.
 
 E+R has also been part of a consortium working on the development of lithium-sulphur (Li-S) batteries within the £540 million UK Faraday Battery Challenge. Once commercially viable, Li-S batteries promise to provide relatively high energy density at low cost for sustainable electric vehicles of the future – inevitably starting with F1.

Strong links
“In addition to our powerful base of textile testing and control companies, many other BTMA members are working on further F1 and advanced composite projects,” says Jason Kent in conclusion. “We are also forging strong links with the UK’s key research hubs such as Sheffield University’s Advanced Manufacturing Research Centre, the Northwest Composites Centre in Manchester, the National Centre for Motorsport Engineering in Bolton and the National Composites Centre in Bristol.

“The BTMA recently became an associate member of Composites UK too, because this sector is the crucible of innovation for tomorrow’s textiles.”

In a strategic move designed to align a long-term vision, RTS Textiles Ltd (RTS) announced that all operations and joint venture partners are united as the RTS Textiles Group Ltd (RTS Group). This newly formed global powerhouse in the workwear and protective textiles markets will be led by RTS, with minority shareholdings held by TMG – Acabamentos Têxteis S.A. (TMG) and Sapphire Textile Mills Limited (STM).

Effective 24th March 2025, this merger marks the next step in a partnership that has developed over years of collaboration between RTS, TMG and STM. Initially starting as supply chain partners, in 2017 TMG and RTS entered into a joint venture as MGC in Portugal, and in 2021 STM and RTS entered into a strategic partnership under CTI in Asia. This new integrated strategic merger will further enhance the combined strength of all three companies offering greater innovation and operational efficiency, positioning RTS Textiles Group as a leading force in the market.

The group will encompass RTS' wholly owned brands and operations, including Carrington Textiles, Pincroft and Alltex, as well as full ownership of CTI, MGC and Melchior. The current management team at RTS will continue to lead the new entity, ensuring continuity and maintaining strong customer relationships.

Leveraging Expertise and Resources
The merger brings together the unique strengths of each organisation: RTS, known for high-performance flame-retardant (FR) fabrics for the PPE sector and rotary screen-printed fabrics for the military market, TMG - experts in weaving, dyeing and finishing high-quality fabrics, serving a wide variety of applications in the workwear sector and STM, specialised in vertical integration, with a focus on spinning, weaving, dyeing and finishing workwear textiles.

INDA, the Association of the Nonwoven Fabrics Industry, has announced the program for IDEA®25, a two-day Sustainability in Nonwovens Conference. IDEA25 will take place April 29-May 1, at the Miami Beach Convention Center in Florida.

The IDEA25 conference will bring together industry professionals to share knowledge and strategies to advance sustainable practices, highlighting the need for ongoing innovation, regulatory compliance, and incorporating eco-friendly materials to foster a more sustainable future.

The conference will include engaging sessions on various pertinent topics such as regulatory trends, data and technology, innovative and sustainable materials, hemp and natural fibers, bioplastics, equipment and processes, and integrating sustainability throughout the lifecycle of products.

Highlights of the IDEA25 Sustainability Conference

April 29:

• Navigating the Shifting Winds of Sustainability Regulations: Gain U.S. and European Union perspectives on compliance and innovation in the face of evolving regulations
• “In God We Trust… All Others Bring Data”: Learn how to craft a believable and transparent sustainability story
• Innovative and Sustainable Materials: Discover how green product development starts with greener nonwovens
• Hemp Fibers in Nonwovens: Explore the potential of hemp and other natural fibers and their applications in sustainable products

April 30:

• Cradle to Grave Bioplastics: Understand the importance of ensuring sustainability in the use of bioplastics from the beginning to the end-of-life
• Design for Sustainability: Explore the impact of product and process design on overall product sustainability, during two sessions
• Cradle to Next Life: Challenge the “to the grave” mentality and explore strategies for product reincarnation

The conference is an integral part of IDEA, the premier event for the nonwoven and engineered fabric industry. Hundreds of companies from around the globe representing the entire global supply chain will showcase their latest innovations at the exhibition. 

Fashion for Good and The Microfibre Consortium launch 'Behind the Break: Exploring Fibre Fragmentation,' a study investigating the key drivers of fibre fragmentation. The research aims to challenge root causes and assumptions, address data gaps, and validate test methods. Tackling the issue at the source, this project is c reated to advance the industry knowledge needed to mitigate fibre fragment pollution.  
 
The project brings together major fashion brands and manufacturers including adidas, Bestseller, C&A, Inditex, Kering, Levi Strauss & Co., Norrona, ON, Paradise Textiles, and Positive Materials, with Under Armour joining as a project partner. Testing will be conducted across three laboratories - Paradise Textiles, Under Armour, and IMPACT+ Network from Northumbria University - to analyse fibre fragmentation in cotton knit, cotton woven, and polyester knit fabrics.  

BEHIND THE BREAK: Data required to understand root causes of fragmentation  
Fibre fragmentation is a significant topic of concern across the industry, with studies highlighting the potential threat to ecosystems and human health. This underscores the urgent need for the development of effective strategies aimed at mitigating the negative impact of fibre fragments.  
 
In recent years, several domestic and industrial mitigation efforts have been developed to capture fibre fragments before they enter air, water, and soil. However, the focus lies in reducing fibre fragments from entering the environment downstream, rather than tackling the problem at the source.

It is pivotal for the industry to better understand the root causes and mechanisms of fibre fragmentation. Therefore, under this initiative, Fashion for Good and The Microfibre Consortium are launching:  

• A new report, which aims to offer a snapshot of the issue of fibre fragmentation through the lens of the textile and fashion industry, unpacking various aspects of this complex issue (definition, sources and pathways, root causes, analytical test methods, solution portfolio, biodegradation, toxicity and regulation).  
• “Behind the Break: Exploring Fibre Fragmentation” project, identifying root causes of fibre fragmentation within manufacturing processes (such as different dye methods) and how these influence fibre fragmentation. It will focus on three different fabric types - cotton knit, cotton woven and polyester knit. The project includes various testing methods, leveraging the expertise of project partners Under Armour, Impact+ and Paradise Textiles. You can learn more about the testing details here.

"Fibre pollution is a challenge that the industry faces as a whole, so we are partnering with The Microfibre Consortium to contribute to the foundation of data that will help us better understand the root causes of fibre fragmentation. The focus on different testing methods will allow us to reduce uncertainty, take a common direction and set priorities for future research and initiatives within the industry.” Katrin Ley, Managing Director at Fashion for Good.  

This initiative aims to identify the most effective approaches to tackling fibre fragmentation at the source through the following insights:  

• Enhancing Test Methods: Validate and refine testing techniques to ensure accuracy, reliability, and alignment with industry standards.
• Strengthening Data Correlation: Compare results across methods to identify variations, uncover discrepancies, and establish clearer data connections.
• Driving Improvements: Address limitations in current methods, expand databases, and support better design and supply chain practices.
• Supporting Stakeholders: Equip partners and industry players with practical strategies to reduce fragmentation through improved design and manufacturing.
• Informing Policy: Provide valuable insights into contamination and fibre structures to shape effective regulations and policies.

To read the report and learn more about the project click here.
“Partnering with Fashion For Good has helped to unite the project partners behind the ongoing need for alignment on closing fibre fragmentation knowledge gaps. With this rallied support, we can build on the existing state of knowledge and make great strides in addressing urgent topic challenges for a future of informed, science-led and integrated mitigation action.” Kelly Sheridan, CEO at The Microfibre Consortium.
 
“By conducting this study, we are taking a proactive approach to addressing microfibre release. Our goal is to leverage data-driven insights to improve our processes, product design, and sourcing practices, thereby contributing to a less polluting industry. Collaboration across stakeholders is crucial to accelerating our progress toward a more sustainable future.” Lucie Anne Martinol, Textile Innovation Lead at ON.  
 
“At Paradise Textiles, we recognise that the future of the fashion and textile industry hinges on our ability to address challenges like fibre fragmentation head-on. By partnering with Fashion for Good and The Microfibre Consortium, we're bringing collective insights together to validate theories on the root causes of fibre fragmentation. Our objective is to identify processes and strategies that mitigate fibre pollution through informed textile design and manufacturing processes. We're excited about continuing this critical work and pioneering innovative technologies that can reshape the industry for the better.” Lewis Shuler, Head of Innovation at Alpine Group/Paradise Textiles
 
“Positive Materials believes that reducing fibre fragmentation requires innovation at every stage. Our partnership with Fashion for Good and The Microfibre Consortium on Behind the Break is critical because we're not just aiming to reduce shedding; we're making sure our materials maintain the high standards our customers depend on. It’s about finding that balance where environmental responsibility drives innovation, not compromises it.” Elsa Parente, Co-CEO & CTO of Positive Materials

The National Council of Textile Organizations (NCTO), National Chamber of the Textile Industry (CANAINTEX), and Canadian Textile Industry Association (CTIA) issued a joint statement urging President Donald Trump to reach a deal with Mexico and Canada to avoid imposing 25 percent tariffs on imports from these countries and to close the de minimis loophole immediately.

“All three of our countries are partners in a vital textile and apparel coproduction chain that generates $20 billion in two-way trade and helps support over 1.6 million jobs under the United States-Mexico-Canada Agreement (USMCA) — a trade deal that was negotiated during President Trump’s first term in office,” the associations said.

The U.S. textile industry ships $12.3 billion, or 53 percent, of its total global textile exports to Mexico and Canada. Those inputs come back as finished products to the United States under the USMCA.

Mexico exports $9 billion in textile and apparel to the United States. Mexico is the 4th largest exporter of textiles and the 6th largest exporter of apparel to the United States.

Canada exports approximately $1.8 billion in textiles and apparel to the United States and Mexico, with the United States being the destination for 64 percent of its total global textile export, including high-quality flame-resistant materials and medical equipment including PPE.

“While we fully support President Trump’s efforts to stem illegal migration and to address the fentanyl crisis as quickly as possible, we urge the administration to refrain from imposing penalty tariffs on imports from USMCA partners. We are focused on ensuring a normalized trading relationship between our countries,” said NCTO President and CEO Kim Glas. “Imposing penalty tariffs on imports from critical U.S. free trade agreement (FTA) partners will only serve to benefit China and other Asian countries that don’t play by the rules and to harm the U.S. textile industry and manufacturers in our Western Hemisphere supply chains.”

“As part of any deal with Mexico, Canada—and China—we also call on the Trump administration to end the de minimis tariff exemption immediately for imports from all countries. This loophole in U.S. trade law, which allows imports valued at $800 or less to enter the United States duty-free hurts our textile and apparel industries, rewards countries like China, and helps facilitate the flow of illegal and toxic products, such as fentanyl and fentanyl precursors into the U.S. market,” Glas added.

“Despite steps taken by our countries to prevent the importation of goods that are undervalued, made with forced labor or transshipped, we have seen firsthand how the Asian market has gained an unfair advantage through predatory trade practices, displacing companies and workers in our industries and undermining our critical coproduction chain,” said Rafael Zaga Saba President of CANAINTEX.

“Canada is seeking to preserve our strong coproduction chain with Mexico and the United States which spurs investment, trade and employment in our three countries,” said Jeff Ayoub, Chairman of the Board of CTIA. “These additional tariffs would harm our industries and workers, and we urge President Trump stop these expected tariffs from being imposed.”

“We look forward to working closely with the Trump administration and continuing to educate officials about the adverse impact of penalty tariffs on imports from Western Hemisphere countries and de minimis on our industries and workers, while highlighting the critical nature of our strong coproduction chain, which contributes to our overall investment, job growth, and economic stability,” the associations jointly added.

NCTO is a Washington, DC-based trade association that represents domestic textile manufacturers.

• U.S. employment in the textile and apparel supply chain was 501,755 in 2023.
• The value of shipments for U.S. textiles and apparel was $64.8 billion in 2023.
• U.S. exports of fiber, textiles and apparel were $29.7 billion in 2023.
• Capital expenditures for textiles and apparel production totaled $2.27 billion in 2021, the last year for which data is available.

CANAINTEX is a Mexico City-based trade association representing Mexican textile producers.

• The textile industry in Mexico provides over 1.1 million jobs.
• Mexican textile exports are projected to reach 9 billion USD in 2024.
• Mexico is the 4th largest exporter of textiles and the 6th largest exporter of apparel to the United States.
• One out of every three pairs of pants sold in the U.S. is made in Mexico.
• With 36% domestic content in its exports, the textile industry generates the highest value-added of any manufacturing sector in the country.

CTIA represents domestic textile manufacturers across Canada, advocating for policies that support innovation, sustainability, and growth in the sector.

• The Canadian textile industry employs approximately 30,000 textile and apparel workers.
• The total value of shipments for Canadian textiles and apparel was approximately C$7.5 billion in 2023.
• Canada exported approximately US$2.66 billion in textiles in 2023, with 64% (US$1.71 billion) going to the United States.

Haelixa, a leader in textile traceability solutions, has appointed Marwa Zamaray, a recognised advocate for ESG and European Climate Pact Ambassador, to its Advisory Board. With extensive experience in supply chain due diligence and sustainability regulations, Zamaray will support Haelixa’s mission to enhance transparency and mitigate risks in global supply chains.

Marwa Zamaray brings a wealth of experience in addressing the traceability challenges of textile brands. Throughout her career, she has worked for leading fashion brands such as Tommy Hilfiger (PVH) and Zara (Inditex), as well as value chain partners and solution providers across the industry. Her deep understanding of brand requirements and supply chain complexities positions her as an ideal fit for Haelixa.

Marwa Zamaray is a recognised ESG advocate and European Climate Pact Ambassador with expertise in supply chain traceability, ESG compliance, and sustainable business strategies. She serves as Interim Marketing Director at TextileGenesis, leading efforts to revolutionise supply chain transparency through SaaS traceability platforms. As a European Climate Pact Ambassador, she is a frequent keynote speaker and industry moderator, advocating for climate action and responsible sourcing. With a background in B2B marketing, business development, and strategy, Marwa specialises in helping organisations strengthen sustainability initiatives, improve traceability, and drive impactful market transformation.

Source Fashion, Europe’s leading responsible sourcing show, opens next Tuesday 18th February, at Olympia London, welcoming buyers, retailers, and sourcing professionals from around the world. Running until 20th February 2025, the show will host hundreds of makers and manufacturers from over 20 key sourcing regions, including Turkey, Taiwan, Ethiopia, Egypt, China, India, the UK, France, Hong Kong, and Portugal.

With leading retailers and brands such as ASOS, Barbour, Boohoo, Flannels, Frasers Group, French Connection, GANT, Hawes & Curtis, Jaded London, John Lewis, Lipsy, Lucy & Yak, ME+EM, Marks & Spencer, Moss Bros, Mothercare, New Look, Next, Oliver Bonas, Primark, Saraha, Toast, The Very Group, Whistles, already pre-registered, Source Fashion is set to be a must-attend event for businesses looking to source responsibly and discover innovative solutions to industry challenges.

A Platform for Innovation and Sustainability
The three-day event goes beyond sourcing, offering a dynamic content programme across two dedicated stages: The Source Catwalk Stage and the Source Debates Stage.

Visitors can explore the latest trends and insights into responsible fashion with The Source Catwalk Show – taking place three times daily, showcasing curated womenswear looks built from exhibitors’ collections, highlighting trends such as Circus Play, Romance, Plant Power, and Hyper Tactile.

Exhibitor Highlights
Source Fashion will feature an impressive line-up of responsible manufacturers from around the globe with the spotlight on the UK, Egypt, India, and Portugal. Highlights include:

• Dee Kay Knitwear (UK) – A leading supplier of high-quality wholesale knitwear.
• YOKA YO (UK) - Helping take designs from initial concept through to final product development.
• The Natural Fibre Company (UK) – An award-winning yarn manufacturer working with rare breeds and natural fibres.
• National Weaving (UK) – Specialists in premium woven and printed labels, with a focus on sustainability The Fashion Incubator (Egypt) – A sustainable fashion manufacturer specialising in knit, woven, sportswear, and swimwear.
• Desert Crafts Design Studio (India) – A womenswear manufacturer focused on casual and resort wear.
• WonderRaw (Portugal) – Experts in luxury blanks and fully customised garments made from 100% organic cotton.

Headline Designer: Stuart Trevor
Scottish-born fashion designer Stuart Trevor, founder of All Saints and sustainability advocate, is set to headline the Source Catwalk. After years mentoring brands with a positive social and environmental impact, Trevor’s latest label, STUART TREVOR, focuses on sustainable fashion made from repurposed materials. Trevor set out to create the world’s most sustainable brand with a mission to make buying sustainable products easier, more fun and create non-destructive clothing from other peoples’ waste. His designs will take centre stage at the Source Catwalk, demonstrating how fashion can be both stylish and sustainable.

The Source Catwalk also offers a diverse and informative programme of conversations with thought leaders, retail case studies and challenging panel discussions. Now located on the balcony, presenting leading voices within ethical fashion.

• Source Debates – A new stage for this year, providing an opportunity to voice thoughts and get involved in the conversations - tackling the industry biggest questions and challenges, from sustainability and circularity to transparency and the future of fashion sourcing.

Speaker Highlights

Source Fashion’s comprehensive speaker programme will bring together industry leaders, sustainability experts, and fashion innovators. Key sessions include:

• ‘From Fast Fashion to Circularity’ (Source Catwalk, Tuesday, 11:30 AM) – A discussion on how brands can shift towards sustainable models while competing in the fast-fashion landscape, featuring leaders from Vivo Footwear, Neem London, YOU Underwear, and Johnston’s of Elgin.
• ‘A collaborative journey from farm to fashion’ (Source Catwalk, Tuesday, 1:30pm) - explores how The Natural Fibre Company and John Smedley have forged a groundbreaking partnership, transforming heritage craftsmanship and sustainable innovation into a powerful success story.
• ‘Tech and sustainability: why data holds the key for a greener future’ (Source Catwalk, Tuesday 2:10pm) - Linda Pimmeshofer from Insider Trends explores how data-driven innovation can revolutionise fashion’s fight against emissions, with global examples and a vision for a tech-enabled future
• ‘The Urgency of Transparency’ (Source Catwalk, Wednesday, 11:00 AM) – A fireside chat with Andrew Xeni, Founder of Nobody’s Child and Fabacus, on why transparency is critical in building consumer trust.
• ‘Ecosystem Thinking in Fashion: Redesigning for Regeneration’ (Source Catwalk, Wednesday, 2:10 PM) - Safia Minney MBE, Founder of Fashion Declares is joined by Dr Sri Ram, Founder - Bags of Ethics, Supreme Group, Matthias Knappe, Head of Unit, International Trade Centre (ITC) and Nick Reed, Founder, Neem London for to explore scaling circular practices, adopting regenerative models, and building stronger supply chain relationships to inspire action and meaningful change.
• ‘A Clothing Company That Doesn’t Produce Clothes’ (Source Catwalk, Wednesday, 1:30 PM) – Stuart Trevor in conversation about his upcycling-focused brand and the future of circular fashion.
• Designing tomorrow: Is speculative thinking the key to fashion retail's future? (Source Catwalk, Wednesday, 1:30 PM) - Geraldine Wharry, Fashion Futurist, Trend Atelier on speculative design.
• ‘Taking the Lead When Legislation Falls Short’ (Source Debates, Thursday, 11:00 AM) – This session, with Safia Minney MBE, looks at how businesses can drive sustainability initiatives beyond Government mandates.
• Can fashion brands embrace sustainability without the fear of being perfect? (Source Debates, Thursday, 11:30 AM) - Jonny Rowe and Joe Russell, Co-Founders, Land of Plenty look at encouraging small wins, while questioning the common fears surrounding building out sustainable practices and the role storytelling and branding to help overcome these.

As part of an ongoing collaboration, The International Trade Centre, under the UK Trade Partnerships Programme, will showcase ethical suppliers from Ethiopia, Madagascar, Tanzania, and Nepal, providing visitors with an exclusive look at sustainable sourcing options from these regions.

TrusTrace, a market-leading platform for supply chain traceability and compliance in the fashion and textile industry, is participating in Textile Exchange’s test pilot project, to evaluate a multiparty Trackit™ system.

The pilot is set to run throughout 2025, marking a significant step forward in advancing traceability and transparency within the textile and apparel supply chain. The project aims to test the performance of an interoperable traceability framework that functions across diverse technology platforms. It is designed to minimize the burden on supply chain operators while maintaining a strong and credible standards system to adapt to an evolving legislative landscape.

Contributing to the Trackit™ pilot project
The TrusTrace platform is built to improve interoperability and works with multiple enterprise systems and data formats. In 2024 the platform gathered primary data on more than 12.9 million global transactions for more than 1.2 billion units, from more than 60,000 suppliers.

TrusTrace’s ability to aggregate, validate, and standardize supply chain data across various ecosystems ensures that brands have access to up-to-date, high-quality data — a critical enabler for making informed decisions to manage supply chain and brand risk, ensure compliance, and drive more sustainable practices. The test pilot aligns with TrusTrace’s vision of empowering brands to know, prove and improve the impact of their supply chain.

Unlocking the Benefits of Digitized Supply Chains
The Trackit™ test pilot aims to not only analyze interoperability of a multiparty system; but also to provide a foundation for supply chain innovation by enabling:

• Efficient data sharing: Streamlining collaboration across diverse stakeholders, from suppliers to brands.
• Informed decision-making: Providing brands with real-time visibility into their supply chains to address environmental and social risks effectively.
• Credible sustainability reporting: Ensuring brands can meet emerging legislative and regulatory requirements with robust and verified data.

According to Fashion for Good, 2025 marks a turning point for the fashion industry, where innovation and sustainability are more crucial than ever. From addressing the intricate challenges of circular footwear design to redefining the resilience of global supply chains, the industry faces both immense tasks and transformative opportunities.

Here are their six pivotal shifts shaping fashion’s future in 2025:

Footwear's Innovation Sprint
Footwear is emerging as fashion’s next big frontier for innovation, ready to match the advancements seen in apparel. Yet, it faces its own set of challenges in achieving circular design. Traditional shoe construction—reliant on complex material blends and adhesives—has long hindered recycling efforts. But 2025 holds promise. A wave of breakthroughs in sustainable materials and manufacturing techniques is on the horizon, led by both established players and bold startups. Together, they’re redefining what’s possible, paving the way for scalable circular footwear.
 
Regional Circularity Takes Center Stage
The future of materials is accelerating, with innovators urgently seeking access to recycled feedstock. Regional sourcing and recycling hubs are becoming pivotal, as the industry builds networks capable of scaling circular solutions. By moving beyond pilot programs, brands are making tangible strides toward robust supply chains that meet both legislative demands and consumer expectations for sustainability.
 
Hard Tech Investment Shifting
Investments in hard tech and innovation within the fashion industry will face a nuanced landscape in 2025. The tightening of venture funding will necessitate greater discipline among startups. Only those who effectively validate their minimum viable products (MVPs) and manage cash judiciously will thrive. This period of consolidation and selective investment presents opportunities for the most prepared innovators to capitalise on market shifts while adapting to evolving investor priorities.
 
The Waste Crackdown
Zero-waste is no longer a lofty ambition—it’s becoming a necessity. With stricter legislation reshaping the landscape, the fashion industry is innovating rapidly to tackle its waste challenges. From advanced materials recovery systems to AI-powered sorting technologies, the industry is racing to adapt. As the resale market is projected to grow, the drive for waste reduction is unlocking new opportunities for impact.
 
Decarbonisation Reality Check
As the industry grapples with missed targets, 2025 will see an intensified push for collective action, with mounting pressure on suppliers to accelerate green transitions. Success will depend on deep collaboration—between brands, local governments, and cross-sector coalitions—especially in manufacturing regions where grid transformation remains critical. The journey is complex, but the shared commitment to decarbonisation is stronger than ever.
 
Supply Chain Geopolitics 2.0
Investment in other manufacturing markets is accelerating as brands seek alternatives to China. But this isn't simple nearshoring - it's about strategic diversification and building resilient regional networks. The focus is shifting to developing new manufacturing ecosystems that can support both traditional and circular production models.