From the Sector

Reset
5 results
07.04.2022

Rieter Annual General Meeting 2022

  • All motions approved

The Corona Virus also had an impact on the 131st Annual General Meeting of Rieter Holding Ltd., Winterthur, on Thursday, April 7, 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 7, 2022, the independent proxy represented a total of 1 986 shareholders who hold 64.4% of the share capital.

The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 4.00 per share. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2023.

  • All motions approved

The Corona Virus also had an impact on the 131st Annual General Meeting of Rieter Holding Ltd., Winterthur, on Thursday, April 7, 2022.

Based on Article 27 of Regulation 3 on measures to combat the Corona Virus (COVID-19), the Board of Directors of Rieter Holding Ltd. decided that shareholders can exercise their voting rights exclusively by authorizing the independent proxy. Shareholders therefore could not attend the Annual General Meeting in person. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 7, 2022, the independent proxy represented a total of 1 986 shareholders who hold 64.4% of the share capital.

The shareholders approved the proposal of the Board of Directors to distribute a dividend of CHF 4.00 per share. In addition, they approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2023.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors Hans-Peter Schwald, Peter Spuhler, Roger Baillod and Carl Illi were confirmed for an additional one-year term of office. Sarah Kreienbühl and Daniel Grieder were newly elected to the Board of Directors for a one-year term of office.

Furthermore, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office. Sarah Kreienbühl was newly elected to the Remuneration Committee and is taking over the chair.

Shareholders also adopted all other motions proposed by the Board of Directors, namely the approval of the annual report, the financial statements and the consolidated financial statements for 2021, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

More information:
Rieter general meeting Spinnerei
Source:

Rieter Management AG

15.07.2021

Rieter: First half of 2021

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

  • Order intake of CHF 975.3 million (first half of 2020: CHF 250.7 million).
  • Sales of CHF 400.5 million (first half of 2020: CHF 254.9 million).
  • EBIT of CHF 9.0 million and net profit of CHF 5.3 million

The first half of 2021 has been characterized by a strong market recovery in combination with a regional shift in demand for new machinery and systems. Rieter anticipates a normalization of the demand for new systems in the coming months. The company assumes that spinning mills will continue to work at high-capacity levels.

For the full year, Rieter expects sales to be above CHF 900 million.

The realization of sales from the order backlog continues to be associated with risks in light of bottlenecks in material deliveries and freight capacities as well as the ongoing pandemic in key markets for Rieter.

In recent years, Rieter has implemented its strategy based on the cornerstones of innovation leadership, strengthening the components, spare parts and services businesses, and adjusting cost structures.

Crisis management in the pandemic year of 2020 was aimed at protecting employees, fulfilling customer commitments, ensuring liquidity, and also strengthening the market position for the time after the pandemic as well as retaining the ability to benefit from the incipient market recovery.

The focus for 2021 remains on the implementation of this strategy. The measures for crisis management relating to the protection of employees and fulfilling customer commitments are still in effect in countries that continue to be affected by the pandemic.

The Rieter Board of Directors has approved the implementation of the CAMPUS project. The Rieter CAMPUS comprises a customer and technology center as well as an administration building at the Winterthur location. It will make an important contribution to the implementation of the innovation strategy and to the enhancement of Rieter’s technology leadership position.

Source:

Rieter

27.01.2021

Rieter: First Information on the Financial Year 2020

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

Order Intake Continued to Recover in the Fourth Quarter of 2020:

  • Order intake increased to CHF 215.1 million in the fourth quarter of 2020 and reached a total of CHF 640.2 million in the 2020 financial year
  • As expected, sales of CHF 573.0 million in the 2020 financial year were significantly down on the previous year
  • EBIT margin of around -15% and net profit of around -16% of sales expected
  • First half of 2021 still heavily impacted by the COVID-19 pandemic
  • Change to the Group Executive Committee

Rieter posted a globally and broadly supported order intake of CHF 215.1 million in the fourth quarter of 2020. Thus, the recovery that began in the third quarter of 2020 after the slump in demand in the second quarter continued (order intake second quarter: CHF 45.7 million, third quarter: CHF 174.4 million). Overall, Rieter’s annual order intake for the 2020 financial year totaled CHF 640.2 million, which corresponds to a decrease of 31% compared to the previous year.

At the end of 2020, the company had an order backlog of about CHF 560 million (December 31, 2019: about CHF 500 million).

As expected, as a consequence of the economic effects of the COVID-19 pandemic, the Rieter Group closed the 2020 financial year with considerably lower sales than in the previous year. According to the first, as yet unaudited figures, total sales of CHF 573.0 million were achieved, which corresponds to a decrease of 25% compared to the previous year (2019: CHF 760.0 million).

Order Intake by Business Group
All three business groups were affected by the slump in demand in the second quarter of 2020 due to the COVID-19 pandemic. Despite the recovery in order intake in the third and fourth quarters of 2020, the weak second quarter was only partially offset.

The Business Group Machines & Systems was particularly hard hit by the effects of the pandemic, with a year-on-year decline of 35%. The Business Groups Components and After Sales each recorded a 24% reduction in order intake.*

Sales by Business Group
The exceptional market situation in 2020 gave rise to a significant decline in sales in all three business groups. Accordingly, reluctance to invest and deferred deliveries by customers caused sales in the Business Group Machines & Systems to decline by 24% compared to the previous year.

Due to COVID-19, a large number of spinning mills stopped production worldwide. This led to low demand for spare parts and wear parts, especially in the second and third quarters of 2020. Accordingly, compared to the previous year, sales in the Business Groups Components and After Sales fell by 24% and 27% respectively in the 2020 financial year.*

Sales by Region
With the exception of Turkey, all regions were affected by the low demand as a consequence of the COVID-19 pandemic.*

EBIT Margin and Net Profit
In the 2020 financial year, Rieter anticipates an EBIT margin of around -15% (2019: 11.2%) and net profit of around -16% of sales (2019: 6.9%). As of December 31, 2020, Rieter had liquid funds of exceeding CHF 280 million and unused credit lines in the mid three-digit million range.

First Half of 2021 Still Heavily Impacted by the COVID-19 Pandemic
Thanks to the improved capacity utilization, Rieter is planning short-time working in only a few areas in the first half of 2021. Nevertheless, Rieter expects sales in the first half of 2021 to be below the break-even point.*

Change to the Group Executive Committee
With effect from March 1, 2021, the Board of Directors of Rieter Holding Ltd. has appointed Roger Albrecht as Head of the Business Group Machines & Systems and a member of the Group Executive Committee.*

Annual General Meeting April 15, 2021
The 2021 Annual General Meeting of Rieter Holding Ltd. will take place in Winterthur on April 15, 2021.*


*See attached document for more information.

Source:

Rieter Management AG

Rieter Investor Update 2020 (c) Rieter Management AG
Rieter Investor Update 2020
23.10.2020

Rieter Investor Update 2020

  • Significant recovery in order intake in third quarter 2020
  • Order intake of CHF 425.1 million after nine months
  • COVID crisis management in place
  • Continuous implementation of the strategy
  • Outlook 2020

The market recovery, which Rieter reported in June 2020, has continued. This is reflected in capacity utilization at spinning mills worldwide, which Rieter monitors. In April 2020, the proportion of producing spinning mills was around 40% while at the end of September 2020 this was around 90%. Against this backdrop, the Rieter Group increased order intake in the third quarter of 2020 to CHF 174.4 million (2nd quarter 2020: CHF 45.7 million). In the first nine months of 2020, the Rieter Group achieved a cumulative order intake of CHF 425.1 million (2019: CHF 524.5 million). Compared to the previous year period, this represents a decline of 19%.

Order Intake by Business Group

  • Significant recovery in order intake in third quarter 2020
  • Order intake of CHF 425.1 million after nine months
  • COVID crisis management in place
  • Continuous implementation of the strategy
  • Outlook 2020

The market recovery, which Rieter reported in June 2020, has continued. This is reflected in capacity utilization at spinning mills worldwide, which Rieter monitors. In April 2020, the proportion of producing spinning mills was around 40% while at the end of September 2020 this was around 90%. Against this backdrop, the Rieter Group increased order intake in the third quarter of 2020 to CHF 174.4 million (2nd quarter 2020: CHF 45.7 million). In the first nine months of 2020, the Rieter Group achieved a cumulative order intake of CHF 425.1 million (2019: CHF 524.5 million). Compared to the previous year period, this represents a decline of 19%.

Order Intake by Business Group

Due to the positive development in the third quarter of 2020, order intake at the Business Group Machines & Systems reached a total of CHF 234.5 million in the first nine months. The reason for the relatively small decline of 8% compared to the previous year is that the new machinery business was already characterized by investment restraint in the first three quarters of the year 2019. The Business Group Components recorded a reduction of 33% to CHF 116.6 million while the Business Group After Sales posted an order intake of CHF 74.0 million, a decrease of 23%. This illustrates the effects of low capacity utilization at the spinning mills, especially in the second quarter of 2020 as a result of the COVID-19 pandemic. The order backlog as of September 30, 2020, was around CHF 515 million (September 30, 2019: CHF 285 million). Cancellations were in the normal range of around 5%.

COVID Crisis Management in Place

Rieter has quickly implemented comprehensive COVID crisis management. Priority is being given to protecting employees, fulfilling customer commitments and ensuring liquidity. The necessary measures to protect employees have been implemented worldwide and the order backlog is being processed largely as planned. Rieter has introduced 40% short-time working in Switzerland and Germany for the second half of 2020. Similar measures were implemented worldwide within the scope of the available legal options. As of September 30, 2020, Rieter had liquid funds of CHF 216.7 million and unused credit lines in the mid three-digit million range in order to ensure liquidity. At the end of September 2020, net debt of CHF 1.2 million was disclosed.

Continuous Implementation of the Strategy

In recent years, Rieter has consistently implemented the strategy with the focus on innovation leadership, strengthening the business on the installed base and optimization of the costs. The company intends to forge ahead with the strategy in the coming months in order to strengthen the market position for the time after the COVID-19 pandemic. The Rieter CAMPUS is an important element of Rieter’s innovation strategy. Depending on the business situation, construction work is due to begin in the first half of 2021.

Outlook 2020

As already announced, in terms of sales and profitability Rieter expects a stronger second half of the year compared to the first half of 2020. Nevertheless, due to the deferral of deliveries by customers, Rieter will also conclude the second half of the year − and thus the full year 2020 − with a net loss. Due to the existing uncertainties, it continues to be difficult to forecast sales and profitability for the second half of 2020. For this reason, Rieter refrains from providing more specific information for the full year 2020.

More information:
Rieter Holding Ltd. Covid-19
Source:

Rieter Management AG

16.04.2020

Rieter Annual General Meeting 2020

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

  • All motions approved
  • Dividend of CHF 4.50 agreed
  • COVID-19

In relation to participation in the Annual General Meeting on April 16, 2020, the Board of Directors of Rieter Holding Ltd. arranged exclusively written or electronic voting and the granting of power of attorney to the independent proxy. In taking this approach, the Board of Directors relied on Article 6a, lit. b of Ordinance 2 of the Swiss Federal Council (Measures to Combat the Coronavirus of March 16, 2020). Physical participation by the shareholders was therefore not possible. The Annual General Meeting was held on the premises of Rieter Holding Ltd. at the company’s headquarters in Winterthur.

At the Annual General Meeting of Rieter Holding Ltd. on April 16, 2020, the independent proxy represented a total of 2 025 shareholders who hold 64.3% of the share capital.

A dividend of CHF 4.50 per share was agreed. The shareholders approved the proposed maximum total amounts of the remuneration of the members of the Board of Directors and of the Group Executive Committee for fiscal year 2021.

The Chairman of the Board, Bernhard Jucker, and the members of the Board of Directors This E. Schneider, Michael Pieper, Hans-Peter Schwald, Peter Spuhler, Roger Baillod, Carl Illi and Luc Tack were confirmed for an additional one-year term of office.
Furthermore, This E. Schneider, Hans-Peter Schwald and Bernhard Jucker, the members of the Remuneration Committee who were standing for election, were also each re-elected for a one-year term of office.

Shareholders also adopted all other motions proposed by the Board of Directors, namely approval of the annual report, the financial statements and the consolidated financial statements for 2019, and formal approval of the actions of the members of the Board of Directors and those of the Group Executive Committee in the year under review. In addition, the authorized capital was extended for a further two years.

COVID-19
At present, it is not possible to predict how the global COVID-19 pandemic will affect Rieter’s sales and earnings in the first and second half of 2020, and thus also for 2020 as a whole.

Rieter therefore refrains from providing an outlook for financial year 2020 and will issue the relevant information as part of the semi-annual report on July 16, 2020.
The company has taken the necessary measures to protect employees and to meet commitments to customers as far as possible.

Thanks to long-standing customer relationships, a focus on innovation, global positioning and the company’s financial stability, Rieter will successfully overcome the challenges.

More information:
Rieter Rieter Holding Ltd.
Source:

Rieter Management AG