From the Sector

Reset
400 results
(c) Monforts
10.11.2022

Monforts part of the VDMA Trade Delegation to Turkmenistan

Monforts will take part in a VDMA textile technology trade delegation to Turkmenistan from November 21-26, on behalf of the German Federal Ministry of Economics.

Around 80% of Turkmenistan’s production of textiles and garments is currently exported, with a value of $350 million in 2020. This is now expected to rise to $450 million by 2023.

In addition to expanding in cotton yarns and fabrics, the country is also looking to enter other textile markets, including nonwovens, carpets and absorbent hygiene products, and negotiations are currently underway between the Turkmenistan Ministry of Textile Industry and the Korean Institute of Industrial Technologies to also commence manufacturing synthetic fibres from polymers.

In 2021, a new textile complex was opened by state-owned textile manufacturer Cotam in the city of Kaka, which is aiming to produce 3,650 tons of yarn, 12 million square metres of different types of fabrics and 1.2 million tons of finished products annually, with the creation of 1,300 new jobs.

Monforts will take part in a VDMA textile technology trade delegation to Turkmenistan from November 21-26, on behalf of the German Federal Ministry of Economics.

Around 80% of Turkmenistan’s production of textiles and garments is currently exported, with a value of $350 million in 2020. This is now expected to rise to $450 million by 2023.

In addition to expanding in cotton yarns and fabrics, the country is also looking to enter other textile markets, including nonwovens, carpets and absorbent hygiene products, and negotiations are currently underway between the Turkmenistan Ministry of Textile Industry and the Korean Institute of Industrial Technologies to also commence manufacturing synthetic fibres from polymers.

In 2021, a new textile complex was opened by state-owned textile manufacturer Cotam in the city of Kaka, which is aiming to produce 3,650 tons of yarn, 12 million square metres of different types of fabrics and 1.2 million tons of finished products annually, with the creation of 1,300 new jobs.

Monforts has supplied seven complete finishing machine ranges to Turkmenistan company Cotam, as the Central Asian country looks to boost its production of cotton yarns and fabrics via an ambitious textile industry modernisation plan.

Cotam now has two separate manufacturing sites at Babadayhan and Kaka, both of which have now been equipped with Monforts technologies built at the company’s plant in St Stefan in Austria.

Cotam supplies finished fabrics to both the apparel and home textiles markets and at its Babadayhan plant is now operating two Montex stenter lines and a Monfortex sanforizing line. At its new Kaka plant, the company has also installed two Montex stenter lines, as well as a Thermex universal hotflue for continuous dyeing and curing.

“Turkmenistan celebrated 30 years of independence in 2021 and has made a giant leap forward in its progressive development,” said Monforts Managing Director Stefan Flöth. “A textile industry equipped with modern high-tech equipment has been created factories and equipped with the most advanced and high-performance equipment built and put into operation. We are extremely pleased that the Ministry of the Textile Industry of Turkmenistan chose Monforts machinery for its new textile complex in Kaka and together with the machines for Babadayhan and other recent projects we are proud to say that 15 Monforts machines are now established in the country.”

Source:

AWOL for Monforts

(c) Iluna Group
08.11.2022

Iluna Group back at MarediModa

Iluna Group is back at MarediModa (November 8-10), the international fair dedicated to fabrics and accessories for the beachwear, underwear and athleisure sectors, to present its latest innovations, with a focus on a new beachwear sets able to combine aesthetic research and environmental responsibility.

In terms of aesthetic innovation, exploration continues with matchy pareos and allovers, double laces with colorful charmeuses and multicolour laces enriched with iridescent effects (Lurex). A novelty of this season is the new double face printing on polyamide with a high sea fastness and iridescent effects on GRS-certified tulle.

The GRS certified Green Label collection uses Renycle® and Q-NOVA®, both GRS-certified pre-consumer recycled polyamide yarns in addition to the recycled stretch ROICA™ EF by Asahi Kasei.

Iluna Group is back at MarediModa (November 8-10), the international fair dedicated to fabrics and accessories for the beachwear, underwear and athleisure sectors, to present its latest innovations, with a focus on a new beachwear sets able to combine aesthetic research and environmental responsibility.

In terms of aesthetic innovation, exploration continues with matchy pareos and allovers, double laces with colorful charmeuses and multicolour laces enriched with iridescent effects (Lurex). A novelty of this season is the new double face printing on polyamide with a high sea fastness and iridescent effects on GRS-certified tulle.

The GRS certified Green Label collection uses Renycle® and Q-NOVA®, both GRS-certified pre-consumer recycled polyamide yarns in addition to the recycled stretch ROICA™ EF by Asahi Kasei.

The BIOLINE embraces the circular economy and presents proposals containing Amni Soul Eco® and ROICA™ V550. Moreover, the continuous path through the new dimension of responsibility continues in several directions: experiments with 16 different natural dyestuffs; and continued investment in technologies that can ensure significant savings in water and energy consumption, including GREENDROP, the new GOTS-certified digital pigment printing system.

Source:

Iluna Group / C.L.A.S.S.

(c) Rieter
Autoconer X6
31.10.2022

Rieter at India ITME 2022

Rieter is presenting the latest innovations in its systems, components and services at the upcoming India ITME 2022 in Uttar Pradesh (India), taking place from December 8 – 13, 2022.

Autoconer X6
The automatic winding machine Autoconer X6 completes the Rieter ring and compact-spinning systems. The machine serves as the final quality assurance in the ring and compact-spinning process and is key to the performance of the subsequent process stages. The Multilink system with Multilot offers maximum flexibility to handle a different type of yarn.

The latest splicer generation OZ1 and OZ2 provides an optimum splice quality based on an open prism. With only two prisms spinning mills can splice the entire spectrum of cotton yarns as well as blends. They are also used for the splicing of cotton-based elastic core yarns in combination with the Elastosplicer. The splice zone exhibits an impressive elasticity in the fabric.

Rieter is presenting the latest innovations in its systems, components and services at the upcoming India ITME 2022 in Uttar Pradesh (India), taking place from December 8 – 13, 2022.

Autoconer X6
The automatic winding machine Autoconer X6 completes the Rieter ring and compact-spinning systems. The machine serves as the final quality assurance in the ring and compact-spinning process and is key to the performance of the subsequent process stages. The Multilink system with Multilot offers maximum flexibility to handle a different type of yarn.

The latest splicer generation OZ1 and OZ2 provides an optimum splice quality based on an open prism. With only two prisms spinning mills can splice the entire spectrum of cotton yarns as well as blends. They are also used for the splicing of cotton-based elastic core yarns in combination with the Elastosplicer. The splice zone exhibits an impressive elasticity in the fabric.

Compacting Solutions
The Rieter compacting devices include the COMPACTapron, COMPACTeasy and COMPACTdrum. Spinning mills can change quickly between ring and compact yarn and offer customers a broader product range.

Recycling Expertise from Rotor to Ring
Rieter offers solutions for the integration of recycled raw material into yarn production to help close the textile loop and make fashion more circular. Both rotor and ring yarns can be produced with a considerable amount of mechanically recycled fibers.

ESSENTIALorder
Based on existing customer information, the webshop ESSENTIALorder visualizes which Rieter machines andn systems are available inside each spinning mill. It therefore offers a personalized shopping experience and facilitates order management, enabling spinning mills to optimize their internal stock levels.

ROBOspin
The piecing robot ROBOspin reduces personnel requirements in the ring spinning section by 50%. The robot also attains productivity increases thanks to higher spindle speeds at equal or higher efficiency.

SSM NEO-FD
SSM is presenting NEO-FD, the assembly-winding machine for precision wound packages for twisting. It meets all requirements for efficient production. The machine features the auto-doffing option and the online back-pressure system for low and high package densities.

Temco CoolFlow Disc
Temco’s CoolFlow texturing discs offer longer lifetime thanks to a brand-new geometry and the latest polyurethane technology. The texturing discs now generate a disc surface that operates at a lower temperature, resulting in slower ageing and abrasion. Further benefits are more stable yarn quality, higher productivity, and an overall process cost reduction.

Gleaming line Photot: Marchi & Fildi Group
27.10.2022

Marchi & Fildi Group: New coloured, reflective yarns for technical, safety and stretch uses

The Gleaming line by the Marchi & Fildi Group includes a wide range of metalloplastic yarns for the most varied of uses. Reflex, the new range of reflective yarns, will join the line.

In addition to uses in the worlds of fashion and furnishings, for fancy yarns, decoration and accessories, an important application for the Gleaming collection is in the sector of technical clothing with high-visibility features.

Reflex, used for the production of fabrics and tapes, able to reflect the light and ensure good visibility for people wearing them in low-light situations, is augmented by new colour shades in addition to the traditional greys.

The innovative reflective yarns in white, black, and light and dark multicolours offer new possibilities for:

The Gleaming line by the Marchi & Fildi Group includes a wide range of metalloplastic yarns for the most varied of uses. Reflex, the new range of reflective yarns, will join the line.

In addition to uses in the worlds of fashion and furnishings, for fancy yarns, decoration and accessories, an important application for the Gleaming collection is in the sector of technical clothing with high-visibility features.

Reflex, used for the production of fabrics and tapes, able to reflect the light and ensure good visibility for people wearing them in low-light situations, is augmented by new colour shades in addition to the traditional greys.

The innovative reflective yarns in white, black, and light and dark multicolours offer new possibilities for:

  • tapes, external labels and accessories;
  • technical fabrics for work clothing with specific safety standards;
  • uniforms, sports clothing and accessories;
  • hosiery, gloves, bibs and hats for night use, for winter clothing and for northern markets.

The latest addition to the range, with an important functionality, is the Reflex stretch yarn, which, apart from in the sectors described above, also finds application in flat bed or circular knitting and sewing. Its composition makes it softer and more versatile in comparison to traditional reflectives.

The Gleaming line represents a completion of the range of yarns produced by the Marchi & Fildi Group. The yarns are available in various thicknesses, widths and types in both metallised and transparent versions, and iridescent, reflective and phosphorescent effects. Also articles are included with particular features of resistance to chemical and dyeing treatments.

Amongst the most recent innovations is the line of metalloplastic yarns in 100% polyester obtained from post-consumer recycling with GRS (Global Recycle Standard) certification.

Source:

Marchi & Fildi Group

DOW
27.10.2022

Dow: Advanced silicone ink for printing especially on highly elastic garments

  • Patented SILASTIC™ LCF 9600 M Textile Printing Ink Base addresses growing demand for improved performance in textile applications

With the continued global growth of the apparel market, the use of polyester, nylon and blends of these materials with elastane is also on the rise, especially in sportswear and loungewear. To support this higher demand for synthetic textiles, Dow is launching a patented silicone ink – SILASTIC™ LCF 9600 M Textile Printing Ink Base – that can be used for printing on synthetic and cotton fabrics, particularly highly elastic garments.

The increased use of synthetic yarns in recent years has resulted in greater performance requirements on ink chemistries such as durability, elongation and ease of use in highly elastic sportwear. To address these needs, Dow leveraged the exceptional benefits of silicone ink bases with products such as SILASTIC™ LCF 9600 Textile Printing Ink Base and SILASTIC™ 9601 Textile Printing Ink Base.

  • Patented SILASTIC™ LCF 9600 M Textile Printing Ink Base addresses growing demand for improved performance in textile applications

With the continued global growth of the apparel market, the use of polyester, nylon and blends of these materials with elastane is also on the rise, especially in sportswear and loungewear. To support this higher demand for synthetic textiles, Dow is launching a patented silicone ink – SILASTIC™ LCF 9600 M Textile Printing Ink Base – that can be used for printing on synthetic and cotton fabrics, particularly highly elastic garments.

The increased use of synthetic yarns in recent years has resulted in greater performance requirements on ink chemistries such as durability, elongation and ease of use in highly elastic sportwear. To address these needs, Dow leveraged the exceptional benefits of silicone ink bases with products such as SILASTIC™ LCF 9600 Textile Printing Ink Base and SILASTIC™ 9601 Textile Printing Ink Base.

Designed for an increased matte effect and improved hand feel, the patented SILASTIC™ LCF 9600 M offers excellent wash durability, high elongation, very soft low tack touch and avoids the “orange peel effect” on cotton substrates. Additionally, SILASTIC™ LCF 9600 M enables safer textile development with its ability to be formulated without the use of PVC, phthalates, solvents, organotins and formaldehyde.

Texaid / Texcircle
26.10.2022

Swiss Textile Recycling Project TEXCIRLCE

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

After two years of joint collaboration and research the Swiss Textile Recycling Project “Texcircle” comes to an end. Partners and stakeholders have worked on the vision of a textile cluster where materials flow in circular loops. The goal of the project was to develop high-quality yarns and products incorporating such a large amount of recycled textiles as possible. In the end, several product prototypes from carpets, socks, and curtains to pullovers, padding and accessories have been developed with at least 50 % recycled fiber up to 80 % recycled fibers and yarns.

Europe has a waste problem of 7.5 million waste of which only 30-35 % is collected and less than 1 % of the textile and clothing worldwide is recycled into textiles and clothing again. It is as well found that around 80 % of the impact of a textile product lies in the design.

Together with the design research expertise of the Lucerne University of Applied sciences and arts, the spinning expertise of Rieter and the sorting and collection expertise of Texaid, systems should be created where products of high quality can be produced of recycled fiber. On board were the expertise of further Cluster partners of Brands, Retailers, and the public sector to see how a joint Cluster and system coukld be established.

The Project Texcircle and cluster is led by the Lucerne University of Applied Sciences and Arts – Art  & Design, and in collaboration with Coop, Rieter, Jacob Rohner AG, Ruckstuhl AG, TEXAID as well as workfashion.com ag. Furthermore, Bundesamt für Zivildienst ZIVI, NIKIN AG, and Tiger Liz Textiles are supporting the project. The project is funded by Innosuisse.

Furthermore, collaboration partners from all over Europe contributed to the project to enable these prototypes and systems.

Through joint developments from the design, the collecting, sorting trials, tearing, and spinning trials until the actual production trials and product testing. The partners were able to recycle 2.5 Tons of pre-and post-consumer textile waste into product prototypes with a promising commercial interest. From socks, west, and pullovers to non-woven felts and accessories to carpets and curtains. Through our 2 years of collaboration, the teamcame across several hurdles in the textile recycling value chain which could be tackled. This was a proof of concept that a circular system is possible and the industry now has to enable this at full scale.

Source:

Texaid / Texcircle

Photo: Unsplash, Sheraz Shaikh
24.10.2022

C.L.A.S.S. presents its new partner Orange Fiber

Founded in Catania, Italy in 2014, Orange Fiber has developed a process to transform what remains from the industrial pressing process of citrus fruits for juice into a unique textile material. The innovative process has been patented in Italy and extended to major citrus juice producing countries around the world.

Recently, Orange Fiber and the Lenzing Group, a leading manufacturer of textile fibers specialties from wood, started a collaboration to produce the first lyocell fiber branded TENCEL™ composed of cellulose from orange and from wood. Produced using the same closed-loop process as the TENCEL™ Lyocell fibers, the TENCEL™ Limited Edition x Orange Fiber contributes to promote sustainability in the textiles. The name of the fiber is LENZING Lyocell LE orange, abbreviated to OF in the yarn and in the fabric composition.

Founded in Catania, Italy in 2014, Orange Fiber has developed a process to transform what remains from the industrial pressing process of citrus fruits for juice into a unique textile material. The innovative process has been patented in Italy and extended to major citrus juice producing countries around the world.

Recently, Orange Fiber and the Lenzing Group, a leading manufacturer of textile fibers specialties from wood, started a collaboration to produce the first lyocell fiber branded TENCEL™ composed of cellulose from orange and from wood. Produced using the same closed-loop process as the TENCEL™ Lyocell fibers, the TENCEL™ Limited Edition x Orange Fiber contributes to promote sustainability in the textiles. The name of the fiber is LENZING Lyocell LE orange, abbreviated to OF in the yarn and in the fabric composition.

Source:

C.L.A.S.S.

Photo: EREMA
21.10.2022

EREMA: Circular economy for PET fibres

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

The textile industry is the third largest consumer of plastics. While growth rates in the production of fibres and textiles are high, the circular economy has hardly become established in this segment. The EREMA Group is now intensifying development of recycling solutions for this application with their new fibres and textiles business unit. Currently, the focus is on PET fibre materials from fibre production and subsequent processing steps. Technologies for recycling mixed fibre textiles from textile collection sources are to follow in a follow-up project phase.

"With EREMA's VACUREMA® and INTAREMA® technology and PURE LOOP's ISEC evo technology, our company group already has an extensive range of machines for fibre and PET recycling applications. For ecologically and economically sound recycling, however, new technological solutions are needed to use the recycled fibres in higher-value end applications and to achieve a functioning circular economy," explains Wolfgang Hermann, Business Development Manager Application Fibres & Textiles, EREMA Group GmbH. The initial focus will be on PET, regarded as a key material for the production of synthetic fibres. The aim is to find recycling solutions that allow PET fibre materials to be prepared for reuse in PET fibre production processes. This is a significant step for the circular economy because PET fibres in textiles account for about two-thirds of the total volume of PET.

In this development work, the EREMA Group can build on existing know-how. Proven recycling technologies have been combined with a new IV optimiser. "This extends the residence time of the PET melt, which is particularly necessary in fibre recycling to efficiently remove spinning oils. Our recycling process also increases the IV value of the PET melt after extrusion back to the specific level that is essential for production of the fibre," explains Hermann. Waste PET fibre from production processes can therefore be further processed into rPET filament fibre, carpet yarn and staple fibre.

Fibre test centre with plant to test customers' materials
In order to accelerate development work, EREMA opened its own fibre test centre a few months ago, where a cross-company team is working on recycling solutions for fibre-to-fibre applications.

Source:

EREMA Gruppe

Photo: Indorama Ventures Limited
12.10.2022

Indorama Ventures: New plant for nylon yarn

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

  • Collaboration between Indorama Ventures and Toyobo to meet growing global demand for airbags
  • Newly completed plant in Thailand will supply high-performance nylon yarn to customers in the automotive safety sector

Indorama Ventures Public Company Limited (IVL) celebrated the completion of a plant to manufacture high-performance nylon yarn for automobile airbags. The new plant in Rayong, Thailand, was constructed by Toyobo Indorama Advanced Fibers Co., Ltd. (TIAF), a joint venture that Indorama Ventures established with Toyobo Co., Ltd in November 2020.

The plant, which has been built on the site of Indorama Polyester Industries PCL (IPI) in Rayong Province, will deliver 11,000 tons of high-performance yarn per year to meet global demand for airbags that is expected to grow by 3 percent to 4 percent annually as automakers equip vehicles with more airbags and emerging economies require cars to adopt more safety features. Test production is scheduled to start in October 2022 with the goal of starting commercial production in the middle of 2023.

In 2014, Indorama Ventures and Toyobo jointly acquired Germany’s PHP Fibers GmbH, a leading airbag yarn maker. Since then, both companies have strengthened their relationship with a focus to expand in the automotive safety sector. Mr Christopher Kenneally, based in Bangkok, leads IVL’s Fibers segment, which produces fibers and yarns across its Hygiene, Mobility and Lifestyle verticals. Mr Ashok Arora, with over 30 years of experience in fibers and polymer operations, will helm TIAF as CEO while maintaining his role as CTO with IVL Fibers.

Source:

Indorama Ventures Limited

Photo: Haelixa AG
29.09.2022

Haelixa: Egyptian cotton products traceable thanks to DNA marker

Within the scope of the United Nations Economic Commission for Europe (UNECE) initiative “The Sustainability Pledge”, to improve transparency and traceability for sustainable garment and footwear supply chains, the Swiss company Haelixa traces Egyptian cotton from the source up to premium shirts.

The UNECE and United Nations Centre for Trade Facilitation and Electronic Business (UN/CEFACT) has been developing over the period 2019-2022 policy recommendations, implementation guidelines, a call to action, and a traceability toolbox including blockchain and DNA tracing solutions, which has been implemented in few different textile supply chains. Haelixa is part of the group of experts that develops such policy recommendations and conducts projects with key industry players to set traceability benchmarks and later develop them into standards.

Within the scope of the United Nations Economic Commission for Europe (UNECE) initiative “The Sustainability Pledge”, to improve transparency and traceability for sustainable garment and footwear supply chains, the Swiss company Haelixa traces Egyptian cotton from the source up to premium shirts.

The UNECE and United Nations Centre for Trade Facilitation and Electronic Business (UN/CEFACT) has been developing over the period 2019-2022 policy recommendations, implementation guidelines, a call to action, and a traceability toolbox including blockchain and DNA tracing solutions, which has been implemented in few different textile supply chains. Haelixa is part of the group of experts that develops such policy recommendations and conducts projects with key industry players to set traceability benchmarks and later develop them into standards.

Fashion brands are often responsible for complex global value chains and traceability is the needed tool to enable trust, transparency and credible sustainability. The magnitude of the supply chain traceability challenge can be overwhelming for brands, but the UNECE initiative framework facilitates the alignment with suppliers, provides the necessary guidance and the needed tools, with Haelixa as physical traceability provider.

To make the premium shirts traceable, Haelixa has developed a DNA marker to label the raw material, premium Egyptian cotton. The DNA marker has been applied as fine spray to GIZA 96 lint cotton in Borg Al Arab, Egypt and used to produce the finest fabric by Swiss manufacturer Weba. Once applied to the fibers, Haelixa’s DNA markers stay safely embedded into the material and withstand the industrial processing, ensuring traceability from the source until the finished garment. Samples of lint cotton, yarn, and fabric at different steps were verified with a test based on PCR, and the correct DNA marker was detected, thereby enabling the identification of the premium product, of its origin and the specific supply chain. The forensic data obtained were recorded on a blockchain system provided by UNECE. The marked fabric was used to make Hugo Boss cotton dress shirts. As one of the leading premium fashion brands and partner to the UNECE project, Hugo Boss is responsible for a complex global value chain and strives for high sustainability standards and is looking at traceability options.

“In cases like this one, where the material is of the highest quality and the product is shipped from one facility to another for premium processing, adding physical traceability is critical to ensure that the origin, quality and processing claims can be backed up" says Gediminas Mikutis, CTO and co-founder at Haelixa.

Maria Teresa Pisani, Economic Affairs Officer and Project Lead at UNECE, emphasized: “Traceability and transparency are crucial elements to protect environmental, social, and human rights along global value chains. At UNECE, we aim to enhance traceability approaches by exploring new and innovative solutions that help identify and address negative impacts in the fashion industry.”

(c) adidas
23.09.2022

adidas by Stella McCartney: Industry-First, with Viscose Sportswear

The garment is part of the New Cotton Project, an EU Consortium of key players united to demonstrate the potential of circular garment production
adidas by Stella McCartney presented a first of its kind sportswear garment designed to demonstrate the potential of a circular fashion ecosystem. Joining forces with leading names and innovators in the fashion industry to create, test, and innovate, the tracksuit forms the pinnacle expression of the brand’s pilot circularity program, Made to Be Remade. A take-back scheme where consumers can wear it down and then return it by scanning a QR code via the product so it can be remade. Moving adidas closer to its goal to help end plastic waste.

The garment is part of the New Cotton Project, an EU Consortium of key players united to demonstrate the potential of circular garment production
adidas by Stella McCartney presented a first of its kind sportswear garment designed to demonstrate the potential of a circular fashion ecosystem. Joining forces with leading names and innovators in the fashion industry to create, test, and innovate, the tracksuit forms the pinnacle expression of the brand’s pilot circularity program, Made to Be Remade. A take-back scheme where consumers can wear it down and then return it by scanning a QR code via the product so it can be remade. Moving adidas closer to its goal to help end plastic waste.

It’s currently estimated that just under 1% of all textiles worldwide are recycled into new textiles, so it’s vital the textile industry comes together to learn and knowledge-share. Scheduled across a three-year period, the consortium which includes partners such as Frankenhuis have collected and sorted post-consumer end-of-life textiles, which using pioneering Infinited Fiber technology have been regenerated into a new man-made cellulosic fiber called Infinna™ - which looks and feels just like virgin cotton. This is then turned into a yarn blended with organic cotton, for garment production.

Designing the tracksuit, made using viscose (60% viscose, 40% organic cotton) as a consortium member took the process from a linear to a circular model , as the apparel’s function and style were of equal focus to the garment’s end of life existence.

At the end of the project, consortium partner Aalto University, a Finnish multidisciplinary community specialising in science, art, technology , and design, will distribute learnings with the industry and bring this potential circular design solution to the ever-eco-conscious consumer.

Source:

adidas

Photo: C.L.A.S.S.
20.09.2022

Bemberg™ by Asahi Kasei taking part at White Sustainable Milano

  • New fibre with a circular economy footprint obtained from cotton linters through a closed-loop process
  • September 22-25, 2022, WSM-White Sustainable Milano, Visconti pavilion

For the second time in a row Bemberg™ by Asahi Kasei takes part to White Sustainable Milano, the first fashion trade show entirely dedicated to the research and focus on new materials and technologies able to lead to a real ecological transition, developed in collaboration with Giusy Bettoni, CEO and founder C.L.A.S.S., and Marco Poli, Founder of The Style Lift.

After becoming a leader in formalwear lining, in the latest decade this fiber by Asahi Kasei has been able to evolve towards new consumer needs and desires, moving itself towards many different applications such as intimate, fashion, formalwear and activewear. Bemberg™ by Asahi Kasei arrives at WSM with a new step into its journey and evolution in contemporary style with a new Staple-fibre that unlocks creative paths towards mew aesthetics, touch and sustainability.

  • New fibre with a circular economy footprint obtained from cotton linters through a closed-loop process
  • September 22-25, 2022, WSM-White Sustainable Milano, Visconti pavilion

For the second time in a row Bemberg™ by Asahi Kasei takes part to White Sustainable Milano, the first fashion trade show entirely dedicated to the research and focus on new materials and technologies able to lead to a real ecological transition, developed in collaboration with Giusy Bettoni, CEO and founder C.L.A.S.S., and Marco Poli, Founder of The Style Lift.

After becoming a leader in formalwear lining, in the latest decade this fiber by Asahi Kasei has been able to evolve towards new consumer needs and desires, moving itself towards many different applications such as intimate, fashion, formalwear and activewear. Bemberg™ by Asahi Kasei arrives at WSM with a new step into its journey and evolution in contemporary style with a new Staple-fibre that unlocks creative paths towards mew aesthetics, touch and sustainability.

A new yarn range that expands the company’s realm of applications for the fashion and luxury industry, including also knitwear, jersey and casualwear. Indeed, the fibre comes with a circular economy footprint obtained from cotton linters through a closed-loop process. Bemberg™ also ensures certified sustainability credentials through its transparent and traceable approach.

At WSM fair, the company proves it by unveiling a collection of t-shirts developed in collaboration with the MagnoLab smart network of Italian companies. Circular economy and environmental responsibility meet aesthetic research with a collaborative imprint.

The new t-shirt collection created in synergy with MagnoLab, a network of Biella-based companies bringing forward initiative and collabs related to sustainability and circular economy. Staple-fibre is the top ingredient of the collection. The cut t-shirts are presented both in sheer and blends with other certified fibers, including GOTS cottons and RWS wools, capable of enhancing both the hand of the final garment and the performance of the brand-new yarn.

Source:

C.L.A.S.S.

Photo: Rieter
20.09.2022

Rieter strengthens its market position in Turkey

Rieter is moving its Kahramanmaraş service station to a larger location covering 2 000 m2 in a bid to broaden its offering and strengthen its market position in Turkey. The station will house one of the region’s largest test-spinning facilities and provide know-how in sustainable yarn manufacturing.

The comprehensive portfolio covers both mechanical and electronic services, including the revision of gear units, servomotor adjustments, and suction drums. The station will also offer preventive maintenance and mill optimization. The service offering spans the entire Rieter product portfolio.

Rieter is moving its Kahramanmaraş service station to a larger location covering 2 000 m2 in a bid to broaden its offering and strengthen its market position in Turkey. The station will house one of the region’s largest test-spinning facilities and provide know-how in sustainable yarn manufacturing.

The comprehensive portfolio covers both mechanical and electronic services, including the revision of gear units, servomotor adjustments, and suction drums. The station will also offer preventive maintenance and mill optimization. The service offering spans the entire Rieter product portfolio.

Highlights of the Kahramanmaraş Service Station include the setup of a fully automatic rotor spinning machine R 70 and the winding machine Autoconer X6. Three-quarters of the 2 000 m2 service space is reserved for functional activities, which will feature one of the region’s largest test-spinning facilities. Customers can run yarn comparison tests and analyze the impact of different technology parts so they can optimize machine setups. In-depth yarn trials and access to Rieter textile technology expertise will allow customers to cater more effectively to the dynamic demands of textile brands regarding performance, quality and sustainability, such as recycling applications.

The Kahramanmaraş service station is strategically located at the heart of the region’s textile industry, with a large proportion of Rieter’s installed base located within a radius of around 200 kilometers. Turkey is a textile powerhouse, currently ranking fifth in global exports and poised for additional growth. The country’s industry is also implementing a green action plan to help it meet the growing demand for sustainable textiles, especially from Europe.

The new service station starts operations in September 2022 and will accelerate the growth of the company’s three stations in Turkey. Rieter has been operating service stations in Turkey since 2005 with a presence in the country dating back to the 1990s.

Source:

Rieter Holding AG

(c) Shima Seiki
16.08.2022

SHIMA SEIKI exhibiting at FEBRATEX 2022

Japanese flat knitting machine manufacturer SHIMA SEIKI MFG., LTD. will exhibit at the Brazilian Textile Industry Fair (FEBRATEX 2022) this month. On display will be the cutting edge in computerized flat knitting technology, represented by the latest WHOLEGARMENT® machines and design system.

The flagship MACH2XS series features the company’s original SlideNeedle™ on four needle beds and spring-type sinker system supporting a wide range of high-quality WHOLEGARMENT® knitting in all needles. The versatile MACH2S is capable of both WHOLEGARMENT® knitting and shaping on a conventional V-bed. SVR123SP features a special loop presser bed and is capable of producing unique woven-like hybrid fabrics as well as technical textiles. At FEBRATEX it will demonstrate its capability by knitting shoe uppers. The SVR and N.SSR workhorse machines set the industry benchmark for shaping machines, with SVR202 featuring tandem knitting capability for flexible operation. The SFG and SFG-I glove knitting machines rounds out the comprehensive lineup.

Japanese flat knitting machine manufacturer SHIMA SEIKI MFG., LTD. will exhibit at the Brazilian Textile Industry Fair (FEBRATEX 2022) this month. On display will be the cutting edge in computerized flat knitting technology, represented by the latest WHOLEGARMENT® machines and design system.

The flagship MACH2XS series features the company’s original SlideNeedle™ on four needle beds and spring-type sinker system supporting a wide range of high-quality WHOLEGARMENT® knitting in all needles. The versatile MACH2S is capable of both WHOLEGARMENT® knitting and shaping on a conventional V-bed. SVR123SP features a special loop presser bed and is capable of producing unique woven-like hybrid fabrics as well as technical textiles. At FEBRATEX it will demonstrate its capability by knitting shoe uppers. The SVR and N.SSR workhorse machines set the industry benchmark for shaping machines, with SVR202 featuring tandem knitting capability for flexible operation. The SFG and SFG-I glove knitting machines rounds out the comprehensive lineup.

Demonstrations will also be performed on SHIMA SEIKI’s SDS-ONE APEX4 3D design system that is at the core of the company’s “Total Knitting System” concept. With comprehensive support of all aspects throughout the knit supply chain, SDS-ONE APEX4 integrates knit production into one efficient workflow from yarn development, product planning and design to machine programming, production and even sales promotion. Especially effective is SDS-ONE APEX4’s capability to improve on the planning process with virtual sampling. Photo-realistic simulation capability minimizes the need for sample-making, effectively reducing time, material and cost from the prototyping process.

(c) adidas AG
12.08.2022

adidas Originals introduces the NMD V3 Silhouette

In 2015, adidas Originals launched the NMD silhouette – taking cues from the brand’s inimitable archive in order to create a shoe that disrupted the sneaker world at the time. Six years later and the Trefoil has returned with an updated take on the original innovator, channeling the very same independent mindset to present the  NMD V3.

Built for a life in motion, the NMD V3 reimagines its own iconic heritage with a distinctly forward thinking vision. The silhouette features a re-engineered mesh that wraps around the foot, a transparent heel clip, and BOOST cushioning that’s partially encapsulated in a TPU shell. The NMD V3 also comprises an upper made with a high-performance yarn which contains at least 50% Parley Ocean Plastic – re-imagined plastic waste, intercepted on remote islands, beaches, coastal communities and shorelines – and 50% recycled polyester.

In 2015, adidas Originals launched the NMD silhouette – taking cues from the brand’s inimitable archive in order to create a shoe that disrupted the sneaker world at the time. Six years later and the Trefoil has returned with an updated take on the original innovator, channeling the very same independent mindset to present the  NMD V3.

Built for a life in motion, the NMD V3 reimagines its own iconic heritage with a distinctly forward thinking vision. The silhouette features a re-engineered mesh that wraps around the foot, a transparent heel clip, and BOOST cushioning that’s partially encapsulated in a TPU shell. The NMD V3 also comprises an upper made with a high-performance yarn which contains at least 50% Parley Ocean Plastic – re-imagined plastic waste, intercepted on remote islands, beaches, coastal communities and shorelines – and 50% recycled polyester.

More information:
adidas Originals adidas shoes
Source:

adidas AG

11.08.2022

Milliken expands Yarn Production capabilities

  • Milliken purchases spinning plant from Gildan to strengthen internal yarn production

Milliken & Company, a diversified global manufacturer innovating in the textile, chemical, floor covering and healthcare industries, recently acquired one of the Frontier yarn plants in Mayodan, North Carolina, from Gildan. This plant acquisition expands Milliken’s open-end yarn production for its protective fabrics, workwear, government and defense, industrial, and napery textile business units.

The Frontier Spinning Plant #3, which will be renamed the Two Rivers Plant as a nod to its dedicated team and the community it serves, will become a spinning hub for Milliken. Multiple Milliken textile plants throughout the Southeast will source their yarn needs from the Two Rivers Plant.

“Adding this plant to the Milliken manufacturing footprint helps us meet current production needs and offers additional capacity for future growth,” says Kevin Brown, senior vice president of global operations for Milliken’s Textile Business. “The expansion helps us create a resilient supply chain that offers consistency and surety for both our product lines and customers.”

  • Milliken purchases spinning plant from Gildan to strengthen internal yarn production

Milliken & Company, a diversified global manufacturer innovating in the textile, chemical, floor covering and healthcare industries, recently acquired one of the Frontier yarn plants in Mayodan, North Carolina, from Gildan. This plant acquisition expands Milliken’s open-end yarn production for its protective fabrics, workwear, government and defense, industrial, and napery textile business units.

The Frontier Spinning Plant #3, which will be renamed the Two Rivers Plant as a nod to its dedicated team and the community it serves, will become a spinning hub for Milliken. Multiple Milliken textile plants throughout the Southeast will source their yarn needs from the Two Rivers Plant.

“Adding this plant to the Milliken manufacturing footprint helps us meet current production needs and offers additional capacity for future growth,” says Kevin Brown, senior vice president of global operations for Milliken’s Textile Business. “The expansion helps us create a resilient supply chain that offers consistency and surety for both our product lines and customers.”

More information:
Milliken acquisiton
Source:

Milliken

11.08.2022

BB Engineering at the K Show 2022

As a sub-exhibitor of Oerlikon, BB Engineering will present its product range in the fields of extrusion, mixing and filtration as well as PET recycling with the VacuFil and VarioFil R+ systems at the K show 2022.

BB Engineering has been focusing its development work increasingly on recycling technologies for several years. In addition to extruders, filters and mixers that are suitable for both recycling processes and the processing of recyclate, BB Engineering offers a complete PET recycling plant called VacuFil.

As a sub-exhibitor of Oerlikon, BB Engineering will present its product range in the fields of extrusion, mixing and filtration as well as PET recycling with the VacuFil and VarioFil R+ systems at the K show 2022.

BB Engineering has been focusing its development work increasingly on recycling technologies for several years. In addition to extruders, filters and mixers that are suitable for both recycling processes and the processing of recyclate, BB Engineering offers a complete PET recycling plant called VacuFil.

With VacuFil, BB Engineering has developed an innovative PET LSP recycling process. The process combines gentle large-scale filtration and targeted IV regulation for consistently outstanding rPET melt quality. Thus, much more than simple "downcycling" is possible with VacuFil. VacuFil processes a wide range of input materials - post-production and post-consumer. The patented key component Visco+ vacuum filter removes volatile impurities quickly and reliably. VacuFil is a modular system that can be designed for different recycling applications. Simple granulation is possible, but also direct feeding into further processing, e.g. in the synthetic fiber spinning mill. BBE offers VacuFil in combination with its own VarioFil compact spinning plant to produce polyester yarn.

At the K show 2022, visitors can experience the VacuFil Visco+ recycling technology in operation with a connected VarioFil spinning plant and see live how recycling yarn is produced from PET waste.

Source:

BB Engineering GmbH

IVL
03.08.2022

Winners of the RECO Sustainable Young Designer Competition

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

Indorama Ventures Public Company Limited (IVL) named the winners of ‘RECO Young Designer Competition’, Thailand's largest upcycling fashion design event, parading haute couture garments containing at least 60% recycled materials.

Eleven finalists showcased 33 handmade sustainable outfits at the 9th edition of the fashion show at IVL’s headquarters in Bangkok, using recycled PET and polyester items to craft creative fashions. Under the concept of ‘REVIVE: Start from the Street,’ RECO supports young Thai designers while raising awareness of recycling. The designs use a range of recycled materials including recycled PET yarns, discarded fabric from factories, and even repurposed safety belts.

RECO awarded finalists and winners with 500,000 baht in prizes to support their careers. First prize of 125,000 baht was awarded to 23-year-old emerging furniture designer Prem Buachum for his ‘The Origin of Rebirth’ collection, using fabric recycled from post-consumer PET bottles. The first runner-up, Sathitkhun Boonmee, was awarded 75,000 baht for his ‘Remembering Your Favorite Teddy Bear’ collection, using old dolls made of polyester fibers. Second runners-up, Worameth Monthanom and Tanakorn Sritong, received 50,000 baht for their ‘Regeneration of Nature (into Spring)’ collection, using unused fabrics and discarded PET film. Napat Tansuwan, a finalist with his’ Don’t Judge’ collection, will go on to create designer merchandise for sponsor Buriram United Football Club using local weaving techniques from communities in Buriram province.

Mrs. Aradhana Lohia Sharma, Vice President at Indorama Ventures and RECO Young Designer Competition Chairperson, said, “Since 2011, RECO's ambition has been to uplift recycling and inspire people to realize the value of recyclable materials to produce great new products for daily life. We have witnessed many thoughtful initiatives on upcycling through the collections created by our talented young Thai designers. The designs this year showcase stunning wearability and innovation while using a large percentage of recycle materials. Public interest in recycling has been growing immensely, and we are grateful to strengthen the relationship with partners like Buriram United Football Club.”

“Indorama Ventures hopes this competition will be a driving force in nurturing sustainable fashion concepts and increasing the acceptance of recycled materials, especially post-consumer PET. We are proud to be a stepping-stone for our youth's design journey and our community’s sustainable future.”

Source:

IVL

(c) FROY
25.07.2022

FROY wins C.L.A.S.S. ICON 2022

C.L.A.S.S. Eco Hub has selected the winner of C.L.A.S.S. ICON Award 2022, the annual contest with the aim of sponsoring a visionary creative who is able to combine design, responsibility, innovation and communication. Receiving the third edition of the eye-turning award is FROY Club, an experimental and responsible fashion project born in 2018 by designer Arman Avetikyan.

Froy is rooted in Armenian culture and by mixes high quality materials and yarns. Working with a sustainable ethic, Froy reconciles traditional know how and innovative techniques to create hybrid, versatile and speaking surfaces. The brand uses Italian certified fabrics and yarns that meet European standards, selecting natural materials to create high-quality products with a circular life. Froy also chooses GOTS, FSC and OEKO-TEX certified fabrics and yarns in order to support a clear production chain.

C.L.A.S.S. Eco Hub has selected the winner of C.L.A.S.S. ICON Award 2022, the annual contest with the aim of sponsoring a visionary creative who is able to combine design, responsibility, innovation and communication. Receiving the third edition of the eye-turning award is FROY Club, an experimental and responsible fashion project born in 2018 by designer Arman Avetikyan.

Froy is rooted in Armenian culture and by mixes high quality materials and yarns. Working with a sustainable ethic, Froy reconciles traditional know how and innovative techniques to create hybrid, versatile and speaking surfaces. The brand uses Italian certified fabrics and yarns that meet European standards, selecting natural materials to create high-quality products with a circular life. Froy also chooses GOTS, FSC and OEKO-TEX certified fabrics and yarns in order to support a clear production chain.

By receiving two thousand euros for sourcing purposes, smart consultancy support and communication aid from the C.L.A.S.S. team, plus assistance to the brand in commercial activities, a physical stand in the WHITE Show and a dedicated brand page on Renoon powered by C.L.A.S.S. partners; Froy will have the opportunity to upgrade its efforts in terms of responsibility and innovation, while sharing its conscious vision and values with a wider audience. Moreover, the Italian brand with Armenian roots will become part of the C.L.A.S.S. ICON community, joining past winners such as the high fashion Italian designer Gilberto Calzolari and the Portuguese streetwear brand Duarte

Source:

C.L.A.S.S.

Geno and Aquafil
21.07.2022

Geno and Aquafil: Pre-commercial production for plant-based nylon-6

Genomatica (Geno) alongside longtime collaborator Aquafil [ECNL:IM] successfully completed the first demonstration scale production runs for plant-based nylon-6. The material is intended to reshape the $22B nylon industry, enabling brands to meet demand from consumers for sustainable everyday materials from apparel to automotive parts to carpets. Geno and Aquafil have produced the first several tons of plant-based nylon-6 building block caprolactam, have converted it to nylon-6 polymer, and are now in the process of transforming it for evaluation in nylon applications such as yarns for textile and carpet and engineering plastics as part of pre-commercial quantities from demonstration production taking place in Europe.

The companies have been collaborating to first produce pilot-scale quantities of plant-based nylon-6 and have now advanced to produce pre-commercial quantities at demonstration scale which will help determine the final design of future commercial plants. The material will go to leading global brands and their value chain partners who are eager to explore and develop renewable products, create showcase goods and test feedback with customers.

Genomatica (Geno) alongside longtime collaborator Aquafil [ECNL:IM] successfully completed the first demonstration scale production runs for plant-based nylon-6. The material is intended to reshape the $22B nylon industry, enabling brands to meet demand from consumers for sustainable everyday materials from apparel to automotive parts to carpets. Geno and Aquafil have produced the first several tons of plant-based nylon-6 building block caprolactam, have converted it to nylon-6 polymer, and are now in the process of transforming it for evaluation in nylon applications such as yarns for textile and carpet and engineering plastics as part of pre-commercial quantities from demonstration production taking place in Europe.

The companies have been collaborating to first produce pilot-scale quantities of plant-based nylon-6 and have now advanced to produce pre-commercial quantities at demonstration scale which will help determine the final design of future commercial plants. The material will go to leading global brands and their value chain partners who are eager to explore and develop renewable products, create showcase goods and test feedback with customers.

Plant-based nylon-6 is Geno’s third major product line on a path to commercialization. The company has executed high impact deals with a range of brands to accelerate the global commercialization of sustainable materials, with the potential to reduce greenhouse gas emissions by 100 million tons in upcoming years. Recent milestones advancing the sustainable materials transition include: a collaboration with lululemon (NASDAQ: LULU) to bring plant-based materials into lululemon’s products, a production milestone with partner Covestro (OTCMKTS: COVTY) for plant-based HMD used in sustainable coatings, and a partnership with Asahi Kasei (OTCMKTS: AHKSY) and a newly formed venture with Unilever (NASDAQ: UL) to commercialize and scale plant-based alternatives to feedstocks like palm oil or fossil fuels, to make key ingredients used in everyday cleaning and personal care products.

Source:

method communications