From the Sector

Reset
39 results
Launch of GarmentTech İstanbul Exhibition (c) Teknik Fuarcılık
At the GarmentTech İstanbul Exhibition press conference; Teknik Fairs organization team, members of the Garment Machinery Advisory Board, KOMİD President, TEMSAD President and sector representatives.
11.03.2024

Launch of GarmentTech İstanbul Exhibition

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Teknik Fuarcılık, which has more than 30 years of experience in exhibition organization and has made the ITM International Textile Machinery Exhibition a world brand, has taken action to make the success achieved by the garment and ready-to-wear sector sustainable. GarmentTech İstanbul Exhibition, which will be organized with the support of the members of the Garment Machinery Advisory Board and in cooperation with the Apparel Automation and Machinery Manufacturers Association (KOMİD), will host professional visitors and global buyers from all over the world.

The press conference of GarmentTech İstanbul Exhibition was attended by members of the Garment Machinery Advisory Board, Vice Chairman of Astaş Holding H. Kaya Aşçı, Astaş Juki Board Member and General Manager Turgay Aşçı, Chairman of the Board of Çatma Makine Yavuz Çatma, Chairman of the Board of Alba Makine Cengiz Albayrak, General Manager of Malkan Makine Alparslan Er, General Manager of Uğur Makine Temel Kamiloğlu, Tetaş Sales and Marketing Assistant General Manager Murat Eren, Malkan Makina Factory Manager Metin Kılıç and KOMID President Haluk Akın, TEMSAD President Adil Nalbant, KOMİD Members Serkon Makina Chairman İzzet Savaş, Robotech General Manager Hüseyin Çetin, Chairman of the Board of NewTech Machinery Nezir Yazıcı, LGM Foreign Trade Specialist Yiğit Sağdık Manav, Avtek Manager Oğuz Avcı and many sector representatives.

Source:

Teknik Fuarcılık

08.03.2024

Rieter: Partnership with Shanghai's DIW

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

On March 6, 2024, Rieter received an order for the first batch of Rieter technology amounting to around CHF 62 million from Shanghai Digital Intelligence World Industrial Technology Group Co., Ltd. (DIW). Rieter also signed a strategic partnership with DIW to develop an intelligent yarn manufacturing technology that utilizes digitization and automation to minimize conversion costs.

Rieter and DIW signed a first order in the amount of around CHF 62 million for combers and draw frames that will provide the basis to transform DIW’s spinning mills into state-of-the-art industrial textile operations. DIW, a fast-growing company specializing in intelligent manufacturing and industrial operation services, selected Rieter following a competition in which the company’s machines achieved better stability and higher production than competitors. The strategic partnership of DIW and Rieter is designed to further enhance the overall operational efficiency of DIW’s mills by providing highly efficient machines, automation and digitization technology. This will also minimize conversion cost and consolidate the sustainable growth of both companies, while contributing to the high-quality development of the Chinese textile industry.

Source:

Rieter Management AG

28.12.2023

ITMA ASIA + CITME: A success for VDMA member companies

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

This year’s edition of ITMA ASIA + CITME proved to be a success for the exhibiting VDMA member companies. Measured by booked square metres, Germany had the largest contingent, among the foreign exhibitors. More than 40 VDMA member companies were exhibiting their innovative products in Shanghai.

Dr. Janpeter Horn, chairman of the VDMA Textile Machinery Association noted: “Although facing a difficult market situation, this year’s edition of ITMA ASIA + CITME has exceeded the expectations, both in terms of the number of visitors and the quality of the talks. The significant number of foreign visitors to the fair was particularly pleasing.”

Solutions were demonstrated for more sustainable textile productions by most of the exhibitors, and here the VDMA members presented their technologies for saving water, energy and raw materials under the heading “Smart technologies for green textile production.”  

Dr. Uwe Rondé, CEO, Saurer Intelligent Technology AG explained: “Saurer is satisfied with both the number of visitors and the quality of the discussions. Our booth was full from morning to evening with customers focused on latest technologies within the three mega trends: recycling, automation and digitalisation. Although machine utilisation in the spinning mills is still well below average, people are already gathering information and thinking about what to invest in once the market recovers.”

Benjamin Reiners, owner of Reiners + Fürst stated: „This year’s ITMA ASIA + CITME has exceeded our expectations by far. Especially the first day - a Sunday - has brought many high-quality customers and exclusively decision makers to our booth. We estimate about 20% international customers mainly from Bangladesh, Egypt, India, Iran, Pakistan, Uzbekistan and Vietnam. All customers agreed that the market situation at the moment is difficult, capacity usage is between 50-75% in the ring spinning sector and improvement is expected not before the 2nd half of 2024. Nevertheless the general spirit is very positive.“

“This ITMA ASIA was a great success for Trützschler. We welcomed a large number of Chinese visitors to our booth, as well as a significant number of interested international visitors”, said Dr. Bettina Temath, Head of Global Marketing Trützschler Group SE.

Georg Stausberg, CEO of the polymer processing solutions division and chief sustainability officer of the Oerlikon Group stated: „We can look back on a successful show where we were able to meet many of our customers not only from China, but also from Pakistan, India and Indonesia, for example.”

“A very well-attended trade fair, with interesting discussions, great innovative topics, in line with the modern and rapidly developing China" noted Wolfgang Schöffl, head of product line weaving machines and member of the extended management, Lindauer Dornier.

The VDMA Textile Machinery Association and VDMA China were present at the fair, to support the members e.g. with regard to IPR. With the help of a VDMA expert and a contracted law firm, the member company Sahm submitted a complaint application for patent infringement disputes during the exhibition to the onsite IPR office. Both parties, Sahm, and the Chinese company, that used patented design without permission reached an agreement: The Chinese company had to stop displaying functions and designs involving patent infringement on site which meant the removal of some structural parts and the covering of key components protected by patent protection.

Dr. Harald Weber, managing director of VDMA Textile Machinery concluded: “Asia, and China in particular, represent the primary foreign markets for the VDMA member companies in the sector. The Chinese market is the main destination for their exports. Other major export destinations in Asia include India, Pakistan, Bangladesh and Uzbekistan. ITMA ASIA + CITME provides a unique platform to showcase technologies for customers directly in Asia. The VDMA member companies are looking forward to the coming edition of the fair from 14 to 18 October 2024 in Shanghai.”

The latest survey of VDMA members' subsidiaries in China gives reason to hope that the economic situation in the Chinese textile industry could also improve significantly in the second half of the year. In addition, European textile machinery manufacturers are urged to be present on the most important market and at the trade fair and to offer Asian customers most advanced technology for their demanding challenges.

Source:

VDMA e. V.
Textile Machinery

Santoni finalizes Acquisition of Terrot (c) Santoni / Terrot
22.11.2023

Santoni finalizes Acquisition of Terrot

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Santoni Shanghai Knitting Machinery Co., Ltd. announces that it has received regulatory approval from Chinese authorities for its proposed acquisition of Terrot GmbH, a manufacturer of circular knitting machines in Germany.

The acquisition represents a pivotal step in Santoni's strategy to advance the circular knitting machine industry. The integration of Terrot into the Santoni ecosystem is projected to increase Santoni's production capacity and boost its market share, and in conjunction with other strategic objectives, firmly solidify Santoni's position as the leading manufacturer in the industry, with unrivaled scale, depth of innovation and expertise.

Seeking to meet rising demand for high-end circular knitting products, Santoni has pursued an Ecosystem Strategy in recent years, aiming to unify a highly fragmented industry and enhance innovation, sustainability and digitalization to more effectively meet market needs. The deployment of both parties' latest innovation practices, textile automation offerings, integrated enterprise services, C2M solutions, and a platform for designers "Materialliance", will allow Santoni Shanghai and Terrot to connect and bridge demand and offer of circular knitted products.

By incorporating Terrot's offerings, particularly in the double jersey and jacquard sector, Santoni stands to gain a competitive edge in offering machines known for their performance, low maintenance, and cost-effectiveness. Highlighting this shift is Terrot's UCC 572-T, a transfer jacquard machine for sports and leisurewear.

Following the acquisition, Terrot will continue to operate under the leadership of managing directors Robert W. Czajkowski and Dirk Lange. Santoni plans to maintain Terrot’s headquarters in Chemnitz, Germany, along with its facilities, brands, and practices.

Source:

Terrot GmbH

ITMA Asia + CITME Photo: Swissmem
01.11.2023

15 member companies of Swiss Textile Machinery Association at upcoming ITMA Asia + CITME

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

In China, the textile industry is forward-looking and resilient – with a healthy appetite for new technologies and a determination to keep its leading position. Sustainability is increasingly coming into focus, so there is a growing demand for recycling technologies, as well as automated solutions and digitalization. Cornelia Buchwalder, Secretary General of the Swiss Textile Machinery Association, is clear: “China is the main market for a large number of our association members.” On top of growing consumer demand and technological capabilities, the latest ambitious five-year plan will drive further development of the Chinese textile industry in world markets, and Swiss companies will work with all stakeholders to enable its success.

Market proximity
Swiss companies realized many years ago that geographical proximity is the key to success. Stäubli has started to set up offices in Chinese cities since 1998 and counts 12 locations today, to serve the whole country. In 2002, Itema established a centralized local branch which today has 160 employees in various functions. Loepfe has expanded its presence by creating an independent local business unit to overcome the 9,000 km distance by air, while Uster Technologies has had a Chinese subsidiary since 1982, with offices and service stations in different provinces. Luwa set up its offices and workshop in Shanghai in 1997. Rieter established a presence in mainland China in 2005, driven by a strong commitment to expanding the country’s know-how and expertise – and ten years later opened an advanced research center. All Swiss companies with serious business goals in China have made similar commitments to connect with customers and maintain strong relationships.

Understanding Chinese customers
Swiss companies also understand that Chinese customers require dedicated attention, and that speed is more essential than ever in delivering both machines and services.
Manufacturers in China are seeking cost-effective solutions to remain competitive, while consumers are looking for value in their purchases. Companies need to develop solutions that provide tangible economic benefits to their clients. Furthermore, energy savings have become paramount in China, due to the government's commitment to environmental sustainability and reduced carbon emissions. “Businesses are adopting more energy-efficient processes and technologies to meet stringent energy conservation and emission reduction targets,” says Peter Schnickmann, Managing Director at Luwa Air Engineering (Shanghai). He notes an investment trend for solutions helping Chinese companies cut operational costs and minimize their carbon footprint.

To enhance the reputation of both companies and products – and boost the image of the entire industry – the environmental impact needs to decrease. Priorities are saving water and waste, as well as reducing, replacing or completely eliminating the use of harmful substances. China has a strong demand for environmental-friendly solutions and sustainable technologies.

Customer-oriented in weaving
The huge number of Chinese fabric producers calls for an immense volume of weaving machinery to be supplied by international and local providers. Swiss machinery manufacturers hold an impressive share of this business.
Chinese weavers require advanced technology, with increasingly higher standards of efficiency. In weaving preparation, latest solutions match the speed, quality and reliability now wanted. Weaving machines too offer the eco-efficiency, performance, and ease of use needed, with innovations that extend the scope of sustainable weaving, and open-platform systems configurable to weavers’ specific operations. A huge increase in demand for technical textiles in recent years has been driven by applications such as carbon fiber, aramid and glass fiber.

Profitable in spinning
China’s competitive advantages come from its large-scale and integrated manufacturing capabilities, along with the use of advanced automation and digitization technologies. Spinners aim to capitalize on extended market opportunities, with more economical production. The latest air-jet spinning machines serve these goals, allowing exceptionally low production costs per kilogram of yarn, coupled with high flexibility and reliability. Sustainable yarns are in great demand.

The automation trend in spinning mills focuses on connecting production processes. Data is used to ensure the highest quality standards, most efficient raw material usage, reduction of waste, and energy savings. To make spinning mills more competitive, latest solutions combine cutting-edge hardware, data-enabled software and renowned textile expertise.

More information:
ITMA Asia + CITME Swissmem
Source:

Swissmem

ITM 2024 presenting motto: 'Discover the Future' Photo: ITM Exhibitions
27.09.2023

ITM 2024 presenting motto: 'Discover the Future'

ITM Exhibitions will open its doors to host "ITM 2024 International Textile Machinery Exhibition" from June 4-8, 2024. Preparations are in full swing for the organization, where textile technology leaders will bring the latest products together with their visitors for the first time.

The ITM team focused on advertising and promotional activities in order to host thousands of visitors and sector investors from all over the world at the ITM 2024 Exhibition, which halls were almost full due to intense participation demands. In this context; 'ITM 2024 Video', which tells the story of the increasing success of ITM exhibitions over the years and which is eagerly awaited by the whole sector, has recently been published. The video, which was published in Turkish and English on social media accounts such as YouTube, LinkedIn, Instagram, Twitter and Facebook, was viewed by more than 30 thousand people in total and received great appreciation from the viewers.

ITM Exhibitions will open its doors to host "ITM 2024 International Textile Machinery Exhibition" from June 4-8, 2024. Preparations are in full swing for the organization, where textile technology leaders will bring the latest products together with their visitors for the first time.

The ITM team focused on advertising and promotional activities in order to host thousands of visitors and sector investors from all over the world at the ITM 2024 Exhibition, which halls were almost full due to intense participation demands. In this context; 'ITM 2024 Video', which tells the story of the increasing success of ITM exhibitions over the years and which is eagerly awaited by the whole sector, has recently been published. The video, which was published in Turkish and English on social media accounts such as YouTube, LinkedIn, Instagram, Twitter and Facebook, was viewed by more than 30 thousand people in total and received great appreciation from the viewers.

“Discover the Future!” in the video prepared with the main theme “Discover innovations, technologies, the future...” and including clues about the ITM 2024 Exhibition, was revealed as follows:
The textile sector is among the souls of the economy with its production capacity, export volume, and contribution to employment. Many R&D centers around the world and in Turkey are breaking new ground by taking their work and innovations one step further every day. Textile technology leaders are developing technologies that consume less water and energy, are easy to use, are software and automation supported, keep up with trends and respect the environment while doing so. Industry stakeholders, especially textile manufacturers, are now curious about the answer to this question: 'What will be the future of the textile industry, which is digitalizing, complying with sustainability principles, and signing groundbreaking innovations? This question will be answered at ITM 2024, which will host the latest innovations, technologies, artificial intelligence-supported machines, software and design excellence devices in textile machinery.

Source:

ITM Exhibitions

20.09.2023

TMAS Members at ITMA Asia + CITME 2023

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Members of TMAS – the Swedish Textile Machinery Association – will be taking part in the forthcoming ITMA Asia + CITME exhibition, taking place from November 19-23 2023 at the National Exhibition and Convention Centre in Shanghai, China.

Weaving
In the area of weaving, 93% of the 114,000 new looms delivered in 2022 went to Asia, according to the latest figures from the International Textile Manufacturers Federation (ITMF), with China the top destination, followed by India.
As a result, TMAS members like Vandewiele Sweden AB and Eltex have a huge market to address that has been established over many decades.

Vandewiele Sweden AB benefits from all of the synergies and accumulated know-how of the market-leading Vandewiele Group, supplying weft yarn feeding and tension control units for weaving looms to the majority of weaving machine manufacturers. It also retrofits its latest technologies to working mills to enable instant benefits in terms of productivity and control.

Yarn and sewing thread monitoring
With nearly 70 years of expertise in yarn sensor technology, Eltex of Sweden AB has been at the forefront of new product development. Its EYE and EyETM systems are capable of accurately and efficiently monitoring the movement and tension of more than 1,000 yarns simultaneously. These systems are suitable for various applications and fibre types, including warping, winding, multiaxial weaving and new material applications.

Eltex sewing tension monitors, such as the ETM422, have been well-received by customers. This device can monitor the tension of sewing threads in real time, effectively improving the quality and safety of sewn products. Particularly in China's rapidly growing automotive manufacturing sector, the ETM422 has seen widespread use to meet the industry’s escalating demands for product safety and quality.

Dyeing and finishing
“Digitalisation, automation and AI have become the key enablers for sustainable gains across the entire textile industry and so much has been achieved in the past few years, especially in terms of automation,” says TMAS secretary general Therese Premler-Andersson. “One area in which TMAS members are really making a difference right now, is in replacing water and energy-intensive technologies for the dyeing and finishing processes with new digital technologies.”

The TexCoat G4 non-contact spray technology for textile finishing and remoistening, for example, will be showcased in Shanghai by Baldwin. It not only reduces water, chemicals and energy consumption, but also provides the flexibility to adapt to a customer’s requirements in terms of single and double-sided finishing applications. The TexCoat G4 can reduce water consumption by as much as 50% compared to traditional padding application processes.

Photo: Calderdale College
02.08.2023

BTMA: Apprenticeship Training Course for Textile Engineering Technicians in UK

West Yorkshire is to have a first-of-its-kind apprenticeship training course for textile engineering technicians, reflecting a resurgence in the industry locally, and more generally in the UK.

Calderdale College has partnered with the Textile Centre of Excellence (TCoE) and the British Textile Machinery Association (BTMA) to develop the bespoke Level 3 apprenticeship course which will start in September 2023.

Engineering Technician apprentices at Calderdale College will receive training from the TCoE, helping them to develop the engineering maintenance skills required to close the skills gap in West Yorkshire’s textile industry.

While the region has been a flourishing hub for textile excellence since the 19th century and is being revitalised through digitalization and the localisation of supply chains, its success is currently being hindered by an ageing workforce and high staff turnover.

West Yorkshire is to have a first-of-its-kind apprenticeship training course for textile engineering technicians, reflecting a resurgence in the industry locally, and more generally in the UK.

Calderdale College has partnered with the Textile Centre of Excellence (TCoE) and the British Textile Machinery Association (BTMA) to develop the bespoke Level 3 apprenticeship course which will start in September 2023.

Engineering Technician apprentices at Calderdale College will receive training from the TCoE, helping them to develop the engineering maintenance skills required to close the skills gap in West Yorkshire’s textile industry.

While the region has been a flourishing hub for textile excellence since the 19th century and is being revitalised through digitalization and the localisation of supply chains, its success is currently being hindered by an ageing workforce and high staff turnover.

Through adapting the engineering training at Calderdale College to address the current requirements of the textile industry, the unique new course will ensure the passing on of vital know-how and good practice aligned with the new skills demanded by Industry 4.0 and automation.

Collaborative Apprenticeships
Calderdale College has developed the programme over a two-year period through close collaboration with the TCoE and the BTMA, as well as through consultation with British heritage weaver AW Hainsworth and a number of other local textile companies.

The course launch follows on closely from the success of the Collaborative Apprenticeships project launched in 2022 at Calderdale College. To date, this has seen the college engage with over 100 local employers on the benefits of increasing the quantity and improving the quality of the apprenticeships that they offer, as well as encouraging others to introduce apprenticeships for the first time.

“Over the years, we’ve seen how beneficial apprenticeships can be for several sectors, particularly in terms of helping businesses to retain staff and ensuring that they have a steady flow of skilled workers coming in,” said Claire Williams, head of employer engagement at Calderdale College. “Having identified that employers in the textile manufacturing industry were struggling to find apprenticeship training that was designed around their needs, we knew that alongside employers and our partners, we needed to satisfy this critical gap in the market. We hope that this programme will act as a leading example for the rest of the industry to follow.”

Source:

British Textile Machinery Association

(c) Baldwin Technology Company Inc.
13.07.2023

Baldwin releases latest PrintEnomic$ eBook

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Baldwin Technology Co. Inc. has launched a new set of resources for sheet-fed and web offset printers at PrintEnomics.com with the release of the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook.

Its PrintEnomic$ website offers curated resources that analyze trends and issues impacting not only sheet-fed and web offset printers but also narrow web and corrugated printers. Separate eBooks, videos, podcasts and instructional guides are available to help maximize printer profitability in all three specialized areas.

Baldwin is a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries.

More than 5,000 print industry professionals have already downloaded or viewed earlier-released eBooks centered on narrow web (“Untangling the Web”) and corrugated (“From Beast to Beauty”).

Through interviews with customers, industry insiders, in-house engineers – and reviews of the latest reporting – Baldwin explores four trends in the “Video Didn't Kill the Radio Star. And Digital Didn't Kill Print” eBook:

  • The resurgence in book publishing
  • Labor challenges
  • Direct mail marketing as a cure for screen fatigue
  • Sustainability
Source:

Baldwin Technology Company Inc.

(c) EREMA
Manfred Hackl, CEO EREMA Group and Markus Huber-Lindinger, Managing Director EREMA, open the EREMA Discovery Day 2023
09.06.2023

EREMA Discovery Day as meeting place for plastics and recycling industry

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

On June 1, EREMA hosted the EREMA Discovery Day focusing on the post consumer segment from a European perspective. Live demonstrations showcased the latest machine innovations for PET and polyolefin recycling.

The invitation was accepted by around 400 customers and partners, mainly from Europe, to find out about the wide range of recycling technologies for PO and PET plastic waste. The technology that was presented and explained by EREMA experts and guest speakers during lectures in the morning, could then be seen live in-action in the afternoon when the recycling machines were demonstrated in operation. A total of six innovative recycling technologies were on display: INTAREMA® TVEplus® DuaFil® Compact, INTAREMA® TVEplus® RegrindPro® + ReFresher, the COREMA® cascade extrusion system, a VACUREMA® Inline Sheet line equipped with new EcoGentle technology, the new INTAREMA® FibrePro:IV machine, and the PCU-
TwinScrew. These allowed visitors to witness their performance and the high quality of recycled pellets that they produce.

"This wide range of technologies is necessary because the recycling process each of our customers choose depends on the type of plastic, the level of contamination of the input material, and which product will be made using the recycled pellets. Following the expansion of our Ansfelden site and with the new site nearby in St. Marien, we can now demonstrate all these processes, carry out test runs with customers' material and focus on development work independently of our Customer Centre," says EREMA's Managing Director Markus Huber-Lindinger.

EREMA is driving forward research and development work in the company's new R&D Centre. Two halls with a total area of 1,550 square metres and a new office building offering space for 50 workplaces has been built. Here, the company bundles cross-departmental test machines and laboratory facilities for post consumer and inhouse recycling applications. R&D is decentralised at EREMA. Employees from different departments handle process engineering challenges, innovations in mechanical engineering and automation technology - all with the aim of meeting customer requirements and achieving the highest possible quality of recycled pellets.  

On the evening before Discovery Day, EREMA celebrated its 40th anniversary together with customers and partners. A review covered the company's history - from the first workshop in a garage in 1983, to its position today as a innovation pioneer and one of the market leaders.

More information:
EREMA plastics Recycling
Source:

EREMA Group

(c) Zünd Systemtechnik AG
06.04.2023

ITMA 2023: Zünd presents digital single- ply cutting

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

At ITMA 2023 in Milan, Zünd is focusing on the advantages of digital single-ply cutting in modern garment production.

At the show, Zünd will demonstrate the advantages of individual cutting on demand and what benefits single-ply cutting of textiles offers. In the course of digitalization, the market environment of the apparel industry has changed. Producers are responding to increasing digitalization and ever-shorter product life cycles by investing in lean and highly automated production workflows. Solutions from Zünd supported process streamlining from ordering to cutting while minimizing manual interventions.

Zünd's single-ply cutters are the cutting tools in digitized production, offering manufacturers flexibility and profitability. Intelligent automation functions, optical solutions and software tools facilitate resource optimization, keep an eye on material consumption and support employees who can turn their attention to value-adding activities. With digital single-layer cutting, manufacturers speed up their cutting and expand their production capacities at the same time. They can accept orders at very short notice and easily meet delivery times thanks to highly economical and efficiently scalable on-demand production. Peaks in demand can be easily managed.

Zünd cutters give users new flexibility in their production workflow. He can work with complex motifs, demanding textiles and different shapes. The cutting technology enables the apparel industry to produce highly individualized customized garments in small batches and on demand just as economically and efficiently as in high volumes. It can process and handle more orders in less time. At the same time, both material and time are saved. In combination with the MindCut production software and precise single-layer cutting, there is almost no waste. The cut parts can be nested very close to each other and close to the material edges. This not only offers considerable savings potential, but also helps to reduce the ecological footprint.

Source:

Zünd Systemtechnik AG

20.12.2022

JIAM 2022 OSAKA concludes successfully

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Japan International Apparel Machinery & Textile Industry Trade Show (JIAM) has wrapped up four successful days of business at INTEX OSAKA. From 30 November – 3 December 2022, a total of 10,452 visitors found their way to the fairground. 150 exhibitors from 11 different countries and regions welcomed visitors with an extensive and diverse selection of products. Buyers from Bangladesh, India, Sri Lanka, South Korea, and Pakistan constituted the top five visiting countries (excluding Japan), compensating for a drop in visitors from China this year due to COVID-19 travel restrictions.

Under the theme of "It all connects at JIAM – the forefront of technology and master craftsmanship", the 2022 edition showcased apparel manufacturing solutions catered to each and every need, combining skillsets and knowledge with modern technology. At the opening ceremony, Mr Shinsuke Uchinashi, Chairman of the Japan Sewing Machinery Manufacturers Association (JASMA), commented, "In the new normal, there is growing demand for new technological advancements, productivity improvements, and greater quality control. In addition to solving these pain points, this edition’s exhibitors are also showcasing various innovations in response to automation, IoT, and networking."

A wide variety of special seminars held in Hall 4 were well received. Highlights included a skills training seminar hosted by an emeritus professor and panel discussions by leading companies in the manufacturing industry. SDGs, examples of IoT in industrial sewing machines, and upcycling initiatives were also on the agenda, with visitors gathered around the presented items taking notes.
 
The Home Sewing Zone led by three machine manufactures and JASMA held daily workshops where visitors could learn about upcycling using scraps, and take a break at the café with "cup sleeves" of their own making. Ms Kazuko Mizuochi of JASMA said, "We had a great attendance from the very first day. We were able to familiarize participants with sewing machines and also promote upcycling activities."

The next edition will take place from 27 – 30 November 2024 at INTEX OSAKA.

Source:

Messe Frankfurt Japan Ltd

Photo: Baldwin Technology Company Inc.
Adina Starke
13.12.2022

Adina Starke joins Baldwin Technology as West Coast Regional Sales Manager

Baldwin Technology Co. Inc. has appointed Adina Starke, a seasoned print and packaging professional with wide-ranging expertise, as Regional Sales Leader for the West Coast.

At Baldwin Technology Company Inc., a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries, Starke will be responsible for all product sales to print and packaging professionals in Washington, Idaho, Oregon, California, Nevada, Arizona, Utah, Alaska and western Canada.

Starke has spent the past 15 years in various technical and sales roles in the print and packaging industry. Most recently, she spent four years with All Printing Resources (formerly JVI Solutions), as a Territory Manager and a Technical Sales and Business Development Representative. Prior to that, she spent several years with Lohmann Specialty Coating and Sun Chemical.

Starke graduated from Clemson University with a Bachelor of Science degree in Graphic Communications.

Baldwin Technology Co. Inc. has appointed Adina Starke, a seasoned print and packaging professional with wide-ranging expertise, as Regional Sales Leader for the West Coast.

At Baldwin Technology Company Inc., a leading global manufacturer and supplier of innovative process-automation equipment, parts, service and consumables for the printing, packaging, textile, plastic film extrusion and corrugated industries, Starke will be responsible for all product sales to print and packaging professionals in Washington, Idaho, Oregon, California, Nevada, Arizona, Utah, Alaska and western Canada.

Starke has spent the past 15 years in various technical and sales roles in the print and packaging industry. Most recently, she spent four years with All Printing Resources (formerly JVI Solutions), as a Territory Manager and a Technical Sales and Business Development Representative. Prior to that, she spent several years with Lohmann Specialty Coating and Sun Chemical.

Starke graduated from Clemson University with a Bachelor of Science degree in Graphic Communications.

Source:

Baldwin Technology Company Inc.

Photo: Reifenhäuser
26.10.2022

Reifenhäuser Extrusion Systems and maku AG cooperate

  • Strategic partnership for automation system in the field of slot dies and coextrusion adapters

Reifenhäuser Extrusion Systems (RES) - the Reifenhäuser Group's business unit specializing in extrusion components - announces a strategic partnership with maku AG at K 2022, the world's largest plastics trade fair. The aim of the cooperation is the joint marketing and further development of the automation system designed by maku for coextrusion adapters and slot dies.

  • Strategic partnership for automation system in the field of slot dies and coextrusion adapters

Reifenhäuser Extrusion Systems (RES) - the Reifenhäuser Group's business unit specializing in extrusion components - announces a strategic partnership with maku AG at K 2022, the world's largest plastics trade fair. The aim of the cooperation is the joint marketing and further development of the automation system designed by maku for coextrusion adapters and slot dies.

The so-called PAM system (precise, autonomous, mechatronic) is available immediately and exclusively as an automation option for new Reifenhäuser dies and adapters, as well as for aftermarket dies across all manufacturers. PAM enables producers in the field of flat film and sheet production as well as extrusion coating to precisely control the entire hot part (coextrusion adapter and die) via the line's control panel. This is significantly faster and more accurate than conventional control by hand or expansion bolt automation. It enables faster start-up of good production, higher output with lower energy consumption, and thus significantly improved overall equipment efficiency (OEE). The decisive advantage lies in the use of motorized manual adjustment bolts that replace conventional thermal expansion bolts. Reifenhäuser presented the system for the first time at the K 2022.

Source:

Reifenhäuser GmbH & Co. KG Maschinenfabrik
 

06.10.2022

Rieter and the Johann Jacob Rieter Foundation Sponsor Professorship for AI

Together with the Johann Jacob Rieter Foundation, the Rieter Group is supporting a new Endowed Professorship for Industrial Artificial Intelligence (AI) at the ZHAW School of Engineering. The Professorship is dedicated to teaching and research in the field of industrial applications of Artificial Intelligence and will be announced later this year.

The new Endowed Professorship will be established at the Center for Artificial Intelligence (CAI) of the ZHAW in Winterthur. It will focus, in particular, on the application of machine learning methods and knowledge-based systems in connection with processes in production and service.

For Rieter, the commitment is related to the implementation of its technology leadership strategy. The contribution of the Johann Jacob Rieter Foundation to sponsoring the Professorship is in line with the Winterthur Cluster Initiative. The increasing digitalization of production processes opens up new perspectives for Winterthur as a business location.

Together with the Johann Jacob Rieter Foundation, the Rieter Group is supporting a new Endowed Professorship for Industrial Artificial Intelligence (AI) at the ZHAW School of Engineering. The Professorship is dedicated to teaching and research in the field of industrial applications of Artificial Intelligence and will be announced later this year.

The new Endowed Professorship will be established at the Center for Artificial Intelligence (CAI) of the ZHAW in Winterthur. It will focus, in particular, on the application of machine learning methods and knowledge-based systems in connection with processes in production and service.

For Rieter, the commitment is related to the implementation of its technology leadership strategy. The contribution of the Johann Jacob Rieter Foundation to sponsoring the Professorship is in line with the Winterthur Cluster Initiative. The increasing digitalization of production processes opens up new perspectives for Winterthur as a business location.

Building Expertise in the Field of Industrial AI
The Endowed Professorship will serve to build expertise in the field of Industrial AI and will oversee a group that will focus on teaching and research pertaining to trustworthy machine learning. This involves, for example, the deployment of artificial intelligence with the aim of optimizing production processes in relation to the use of raw materials and energy, and making expert knowledge more readily available.

In addition to research, for the purpose of knowledge transfer, the new professorship will also be active in teaching, in the bachelor's degree programs in Computer Science and in Data Science, in the Master of Science in Engineering, and in continuing education.

The annual commitment of CHF 300 000 over a period of six years will be financed equally by the Rieter Group and the Johann Jacob Rieter Foundation.
“The use of artificial intelligence in industry is becoming increasingly important, especially with regard to the potential of data for evaluation and control of complex processes. The support of the Johann Jacob Rieter Foundation and the Rieter Group will allow us to further expand AI research in the field of industrial applications,” explains Prof. Dr. Dirk Wilhelm, Director of the ZHAW School of Engineering.

“The use of Artificial Intelligence will make a significant contribution to automation and process optimization, and thereby advance sustainability in the textile industry. This makes it an important element of the leading technology that Rieter offers,” emphasizes Rieter CEO Dr. Norbert Klapper.

“The Smart Machines cluster is growing in importance,” says Thomas Anwander, member of the Foundation Board, and adds: “The Endowed Professorship for Industrial AI at the ZHAW aims to promote Winterthur as a technology location by pooling locally available strengths in mechanical engineering and Industry 4.0.”

Photo: International Garment Machinery, Spare Parts and Sub-Industry Exhibition
14.09.2022

IGM 2022 ended with great interest

27th International Garment Machinery, Spare Parts and Sub-Industry Exhibition, one of the largest exhibitions in Europe ended with great interest. The IGM 2022 Exhibition, which hosted ready-to-wear investors and leading brands of the garment machinery sector in Istanbul for 4 days, satisfied the exhibitors with the number of foreign and domestic visitors and machinery sales.

27th International Garment Machinery, Spare Parts and Sub-Industry Exhibition, one of the largest exhibitions in Europe ended with great interest. The IGM 2022 Exhibition, which hosted ready-to-wear investors and leading brands of the garment machinery sector in Istanbul for 4 days, satisfied the exhibitors with the number of foreign and domestic visitors and machinery sales.

IGM 2022, Turkey's first and only international exhibition in its field, has become the most comprehensive meeting point of the sector where all technologies used in garment and ready-to-wear production from sewing to cutting, ironing systems to packaging, embroidery to printing are exhibited. IGM 2022, the first international exhibition organized in the garment industry after the pandemic, turned into a platform where many firsts were achieved. Especially domestic machinery manufacturers introduced the latest technologies and innovations developed in the last 4 years for the first time at IGM 2022. In addition, the latest models of embroidery machines were exhibited in working condition only at IGM 2022. International buyers, who had the opportunity to observe and examine all the innovations in the apparel and ready-to-wear sector together, had the opportunity to direct their investments thanks to IGM 2022.

The exhibition, organized in partnership with Tüyap & Teknik Fairs Inc. and in cooperation with KOMİD- Garment Automation Machinery Manufacturers Association and İNSAD- Istanbul Embroidery Industrialists Association, was held at Tüyap Fair and Congress Center on September 8-11. The IGM 2022 Exhibition, which was attended by 100 companies and company representatives from countries including Turkey, Japan, USA, China, South Korea, Brazil, Brazil, Italy, Spain, Germany, Greece, Netherlands, Bangladesh and Iran, was visited by 9822 sector professionals from 64 countries, including 1483 international and 8339 domestic visitors.

Next Meeting on September 21-24, 2023
The next meeting of the IGM 2023 Exhibition will be held at Tüyap Fair and Congress Center between September 21-24, 2023. Considering the dates of the exhibitions organized in the same sector in different countries of the world and Europe and the gains of the sector, an exhibition calendar was determined for the IGM Exhibitions to be held biennially. IGM Exhibition will be organized in 2023 and the following odd years (such as 2025-2027) in order to prevent companies from being under the burden of exhibitions in terms of both time and budget due to participating in more than one exhibition in the same year.

Source:

International Garment Machinery, Spare Parts and Sub-Industry Exhibition

08.07.2022

Swedish textile machinery in Brazil at Febratex

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

A delegation from TMAS, the Swedish textile machinery association, will participate in the forthcoming Febratex textile show which is being held in the German Village Park in Blumenau, in Santa Catarina, Brazil from August 23-26.

As the fourth largest textiles manufacturer in the world, Brazil’s annual revenues from textiles and apparel amount to an annual $48 billion and the industry employs around 1.5 million people directly.

As with the USA and many European countries, product shortages resulting directly from the Covid-19 pandemic, and subsequent supply chain difficulties, have emphasised to Brazil’s industry the attractiveness of more diversified and shorter supply chains which are closer to customers wherever possible. In the past two years, there has been less reliance on imports from Asia to Brazil, and opportunities are arising again for local manufacturing.

Svegea of Sweden has supplied many automatic collarette cutters to Brazilian companies, which are used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements.

Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

Eton Systems, the inventor and world’s leading provider of automated production systems for apparel and other textile-based processes, has supplied a large amount of workstations to Brazilian companies over the years, and believes its newly-launched Opta system is good news for this market becoming more efficient and profitable.

Automation is also high on the agenda of ACG Kinna Automatic, which specialises in automation solutions for filled products such as quilts, pillows and mattresses and also has extensive knowledge in areas such as bed linen and textile filters.

Given Brazil’s extensive forestry sector, the country is a key market for Texo AB, one of the world’s leading manufacturers of weaving machines for the production of paper machine clothing (PMC).

All paper manufacturing machines require a regular supply of PMC, which as large continuous engineered fabrics, carry the paper stock through each stage of the paper production process. With technologically sophisticated designs, they employ fibres and other polymeric materials in complex structures and each paper machine has an average of ten separate fabrics installed on it. Although the PMC business represents just a small proportion of the total cost of manufacturing paper, it can have a significant impact on the quality of the paper, the efficiency of a machine and machine production rates.

More information:
TMAS Febratex
Source:

AWOL Media

Advances in automation from Svegea at Texprocess 2022 (c) Svegea
With Svegea bias cutters, circular woven technical fabrics are fed via a revolving winder and slit at angles.
18.05.2022

Advances in automation from Svegea at Texprocess 2022

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

  • Svegea, a member of TMAS, the Swedish textile machine association, is marking a company milestone this year at Texprocess in Frankfurt from June 21-24  – the 70th anniversary of its automatic collarette cutter.

 On its introduction back in 1952, this machine – used by garment manufacturers around the world for the production of tubular apparel components such as cuff and neck tapes and other seam reinforcements – caused a sensation with its then-unprecedented output of 300 metres per hour.

Time doesn’t stand still, however, and the latest EC 300 machine Svegea will demonstrate at Texprocess 2022 has a slightly improved output – of around 20,000 metres per hour.

“Advances in automation are only making the specialised, bespoke machines we engineer even more efficient and we are expecting a very busy show in Frankfurt and a busy year,” says Svegea Managing Director Håkan Steene. “The garment components our collarette cutters produce make it logical for them to be integrated into the operations of making-up operations wherever they are, and at the moment we’re seeing a lot of interest in the reshoring of operations by our customers, to bring final-stage manufacturing closer to the key European and US markets.”

E-Drive 2
The EC 300 collarette cutter on show in Frankfurt is equipped with the latest E-Drive 2 system providing the operator with a very user-friendly touchscreen, providing full control of the cutting process.

The integrated, fully automatic FA500 roll slitter accommodates diameters up to 400mm and is equipped with three separately adjustable settings enabling three different band widths to be cut within the same cutting cycle. Automatic tube sewing units are provided for sewn tubes in optional rolled or flat folded forms, depending on customer preference.

Niche applications
Svegea supplies many other bespoke machines for applications in the production of both garment components and technical textiles, including rewinding, measuring, inspection and band knife machines.

The ability to produce tubular fabric which is cut on the bias allows customers to provide textiles which not only have improved drape and elasticity properties for complex and intricate shapes, but also offer ways to reduce production costs by eliminating unnecessary wastage from the manufacturing process. Pre-cutting the fabric to a specific bias reduces extra handling of the fabric in further processes, saving customers both valuable production time and costs.

Source:

AWOL Media on behalf of TMAS

(c) Oerlikon
The new Staple Fiber Technology Center in Neumünster
13.05.2022

Oerlikon Polymer Processing Solutions at Techtextil 2022

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

  • Sustainable infrastructure solutions, road safety and health protection

At this year’s Techtextil, Oerlikon Polymer Processing Solutions will be presenting the trade audience with new applications, special processes and sustainable solutions focusing on the production of industrial textiles. Among other things, the company will be showcasing new technology for charging nonwovens that sets new standards with regards to quality and efficiency. Between June 21 and 24, the discussions will be concentrating on airbags, seat belts, tire cord, geotextiles, filter nonwovens and their diverse applications.

More polyester for airbags
Airbags have become an integral part of our everyday automotive lives. The yarns used in them are made predominantly from polyamide. As a result of increasingly diverse airbag applications and also the increasing size of the systems used, polyester is today used as well, depending on the application requirements and cost-benefit considerations. Against this background, the Oerlikon Barmag technologies make an invaluable contribution. In addition to high productivity and low energy consumption, they particularly excel in terms of their stable production processes. Furthermore, they comply with every high quality standard for airbags, which – as in the case of virtually all other textile products used in vehicle construction – must provide the highest level of safety for vehicle occupants. And all this without any loss of function in any climate and anywhere in the world for the lifetime of the vehicle.

Buckle up!
Seat belts play a decisive role in protecting vehicle occupants. They have to withstand tensile forces in excess of three tons and simultaneously stretch in a controlled manner in emergencies in order to reduce the load in the event of impact. A seat belt comprises approximately 300 filament yarns, whose individual, high-tenacity yarn threads are spun from around 100 individual filaments.

Invisible, but essential – road reinforcement using geotextiles
But it not just inside vehicles, but also under them, that industrial yarns reveal their strengths. Low stretch, ultra-high tenacity, high rigidity – industrial yarns offer outstanding properties for the demanding tasks carried out by geotextiles; for instance, as geogrids in the base course system under asphalt. Normally, geotextiles have extremely high yarn titers of up to 24,000 denier. Oerlikon Barmag system concepts simultaneously manufacture three filament yarns of 6,000 denier each. Due to the high spinning titers, fewer yarns can be plied together to the required geo-yarn titer in a more cost- and energy-efficient manner.

hycuTEC – technological quantum leap for filter media
In the case of its hycuTEC hydro-charging solution, Oerlikon Neumag offers a new technology for charging nonwovens that increases filter efficiency to more than 99.99%. For meltblown producers, this means material savings of 30% with significantly superior filter performance. For end users, the consequence is noticeably improved comfort resulting from significantly reduced breathing resistance. With its considerably lower water and energy consumption, this new development is also a future-proof, sustainable technology.

New high-tech Staple Fiber Technology Center
Extending to around 2,100 m2, Oerlikon Neumag in Neumünster is home to one of the world’s largest staple fiber technology centers. As of now, these state-of-the-art staple fiber technologies are also available for customer-specific trials.

The focus during the planning and the design of the Technology Center was on optimizing components and processes. Here, special attention was paid to ensuring the process and production parameters in the Technology Center system could be simply and reliably transferred to production systems. Here, the fiber tape processing line is modular in design. All components can be combined with each other as required. And comprehensive set-up options supply detailed findings for the respective process for various fiber products.

The Technology Center is also equipped with two spinning positions for mono- and bi-component processes. The same round spin packs are used for both processes, characterized by excellent fiber quality and properties and meanwhile very successfully deployed in all Oerlikon Neumag production systems. Furthermore, the spinning plant is complemented by automation solutions such as spin pack scraper robots, for example.

More information:
Oerlikon Neumag Techtextil
Source:

Oerlikon

Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  (c) EFI
EFI Fiery®
04.05.2022

Konica Minolta and EFI Fiery New Launch

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 

  • Konica Minolta First to Launch Presses with EFI Fiery FS500 Pro Software and New Hardware  
  • Five new Fiery servers reduce job prep time while helping to ensure colour accuracy and higher overall throughput  

Electronics For Imaging, Inc. and Konica Minolta Business Solutions Europe GmbH (Konica Minolta) have announced a continuation of their long-term partnership with the release of five new EFI™ Fiery® digital front ends (DFEs) based on the newest Fiery platform, Fiery FS500 Pro.
 
The new solutions EFI and Konica Minolta are announcing include:

·        EFI Fiery IC-319 and IC-318 v2 DFEs that will drive the Konica Minolta AccurioPress C14000/C12000 colour production presses for the high-end production printing market
·        EFI Fiery IC-319 and IC-318L v2 DFEs that will drive the Konica Minolta AccurioPress C7100/C7090 light-production colour presses
·        EFI Fiery IC-317 and IC-419 v2 DFEs that will drive the Konica Minolta AccurioPress C4080/C4070 and AccurioPrint C4065 printers.
 
“With these new EFI Fiery DFEs, we continue to extend the range of what AccurioPress users can achieve,” said Olaf Lorenz, General Manager DX Branding Division Konica Minolta, Inc. “We are pleased to be the first to bring these powerful new DFE solutions into our portfolio as they bring more competitive capabilities to Konica Minolta’s digital printing portfolio.”
 
EFI Fiery FS500 Pro servers offer a higher value proposition
 
“The Fiery FS500 Pro new platform offers advanced speed, higher automation and more capability than other digital front ends,” said John Henze, vice president of sales and marketing, EFI Fiery. “Intelligent automation solutions in these new EFI Fiery DFEs also save customers labour cost and time by minimising the need for manual inspection of print jobs, improving automated u management, and eliminating the need to print a test file to determine where to place finishing lines.
 
“All this decreases cycle time and increases customers’ profit opportunities, while ensuring that they can delight their clients with printing that gets completed accurately and quickly. Reducing the time prepress and press operators must spend on these repetitive tasks also helps print business owners make staff more efficient, offsetting the difficulties they have hiring and retaining talent in today’s labour-constrained economy.”

Source:

EFI GmbH